调用该接口清空设备已设置的期望属性值。

使用说明

  • 调用本接口时,必须传入要清空的属性标识符(Identifies)。如果不传入Identifies,调用会失败。
  • 单次调用本接口,Identifies最多可传入10个属性标识符。
  • 调用本接口清空期望属性值成功后,调用QueryDeviceDesiredProperty接口查询期望属性值时,会返回对应参数Identifier(属性标识符),不会返回对应参数Value了。

QPS限制

单个阿里云账号调用该接口的每秒请求数(QPS)最大限制为50。

说明 RAM用户共享阿里云账号配额。

调试

您可以在OpenAPI Explorer中直接运行该接口,免去您计算签名的困扰。运行成功后,OpenAPI Explorer可以自动生成SDK代码示例。

请求参数

名称 类型 是否必选 示例值 描述
Action String ClearDeviceDesiredProperty

系统规定参数。取值:ClearDeviceDesiredProperty。

IotInstanceId String iot-2w****

实例ID。您可在物联网平台控制台的实例概览页面,查看当前实例的ID

重要
  • 若有ID值,必须传入该ID值,否则调用会失败。
  • 若无实例概览页面或ID值,则无需传入。

实例的更多信息,请参见实例概述

ProductKey String a1BwAGV****

要清空期望属性值的设备所属的产品ProductKey

说明 如果传入该参数,需同时传入 DeviceName
DeviceName String light

要清空期望属性值的设备名称。

说明 如果传入该参数,需同时传入 ProductKey
Identifies.N RepeatList temperature

要清空期望属性值的属性标识符列表。属性标识符个数不能超过10个。

IotId String Q7uOhVRdZRRlDnTLv****00100

要清空期望属性值的设备ID。物联网平台为该设备颁发的ID,设备的唯一标识符。

说明 IotId作为设备唯一标识符,和 ProductKeyDeviceName组合是一一对应的关系。如果传入该参数,则无需传入 ProductKeyDeviceName。如果您同时传入 IotIdProductKeyDeviceName组合,则以 IotId为准。

调用API时,除了本文介绍的该API的特有请求参数,还需传入公共请求参数。公共请求参数说明,请参见公共参数文档

返回数据

名称 类型 示例值 描述
Code String iot.system.SystemException

调用失败时,返回错误码。详细信息,请参见下文错误码

Data Struct

调用成功时,返回的数据。

Versions String {\"temperature\":0}

本次清空期望属性值后,对应属性的期望属性值的最新版本号。

ErrorMessage String 系统异常

调用失败时,返回的出错信息。

RequestId String E55E50B7-40EE-4B6B-8BBE-D3ED55CCF565

阿里云为该请求生成的唯一标识符。

Success Boolean true

是否调用成功。

  • true:调用成功。
  • false:调用失败。

示例

请求示例

https://iot.cn-shanghai.aliyuncs.com/?Action=ClearDeviceDesiredProperty
&ProductKey=a1BwAGV****
&DeviceName=device1
&Identifies.1=temperature
&<公共请求参数>

正常返回示例

XML格式

<ClearDeviceDesiredPropertyResponse>
  <RequestId>E55E50B7-40EE-4B6B-8BBE-D3ED55CCF565</RequestId>
  <Data>
        <Versions>{"temperature":0}</Versions>
  </Data>
  <Code></Code>
  <Success>true</Success>
</ClearDeviceDesiredPropertyResponse>

JSON格式

{
    "RequestId": "E55E50B7-40EE-4B6B-8BBE-D3ED55CCF565",
    "Data": {
        "Versions": "{\"temperature\":0}"
    },
    "Code": "",
    "Success": true
}

错误码

HttpCode 错误码 错误信息 描述
400 iot.device.InvalidFormattedDeviceName The DeviceName format is invalid. 设备名称格式错误。
400 iot.device.NotSupportExemptionValidateType The feature does not support the specified verification type. 该功能不支持物模型免校验类型。
400 iot.prod.NotExistedProduct The specified product does not exist. 指定的产品不存在。
400 iot.prod.QueryProductPropertyFailed An error occurred while querying the product property. 查询产品属性失败。
400 iot.check.InvalidFormattedParameter The parameter format is invalid. 参数格式错误。
400 Iot.digitaltwin.DTInstanceInvalidThingType The digital twin operation is not supported. 孪生数据类型不支持使用此接口访问。
400 iot.check.NullParameter Specify parameter is null. 参数{}不能为空。
400 iot.device.CanNotSetReadOnlyProperty Cannot set read only property. 无法设置只读属性。
400 iot.device.DeviceIsDisable The specified device has been disabled. 真实设备被禁用。
400 iot.device.InvalidIoTId The specified device ID is invalid. 设备ID错误。
400 iot.device.NullDeviceName The DeviceName parameter cannot be empty. 设备名称不能为空。
400 iot.prod.NullProductKey The ProductKey parameter cannot be empty. 入参产品ProductKey不能为空。
400 iot.prod.InvalidFormattedProductkey The ProductKey format is invalid. 入参产品ProductKey格式错误。
400 iot.common.InvalidTenant The Invalid tenant. 不合法的租户或者创建租户失败。
400 iot.prod.QueryPropertyNotFound Query property not found. 查询属性不存在。
400 iot.device.ClearPropertyDesiredFailed Failed to clear desired value of property. 清空属性期望值失败。
400 iot.prod.QueryProductAbilitiesNotFound query product abilities not found. 获取产品功能不存在。
400 iot.Device.NotExistedDevice This device does not exist. 设备不存在或未激活。
400 iot.prod.NullAbilityIdentifier You must specify a feature identifier. 功能标识符不能为空。
400 iot.system.IllegalRequest The request parameter is invalid. 非法的请求参数。

访问错误中心查看更多错误码。