错误码
|
HTTP status code |
错误码 |
错误信息 |
描述 |
操作 |
| 400 | InvalidStorageClusterId.DiskPoolRequired | The specified disk category can only be created in a disk pool. | cloud_agentic_disk只能在disk pool中创建 | 诊断 |
| 400 | InvalidOperation.ExchangeNotAllow | The current user does not support the trade-in savings plan. | 当前用户不支持换购节省计划 | 诊断 |
| 400 | InvalidParam.ExpectedRenewDay | The specified parameter ExpectedRenewDay is not valid. | 续费时间参数错误，请参考开发文档重新设置。 | 诊断 |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | 操作被禁止，因为该资源为共享资源。 | 诊断 |
| 400 | MissingParameter.Disk | The disk modification param can not be empty. | 磁盘变配参数不能为空。 | 诊断 |
| 400 | MissingParameter.Instance | The instance modification parameter can not be empty. | 实例变配的参数不能为空。 | 诊断 |
| 400 | InvalidParameter.CategoryAndSizeConflict | The current operation does not allow both Category and Size parameter to be set. | 当前请求不能同时设置Category和Size参数。 | 诊断 |
| 400 | InvalidParameter.ImageAndDiskConflict | The current operation does not allow both ImageId and DataDisk parameter to be set. | 当前请求不能同时设置ImageId和Disk参数。 | 诊断 |
| 400 | InvalidParameter.NetworkAndDiskConflict | The current operation does not allow both network modification parameter and disk parameter to be set. | 当前请求不能同时设置网络变更和Disk参数。 | 诊断 |
| 400 | InvalidParameter.NetworkAndImageConflict | The current operation does not allow both network modification parameter and ImageId to be set. | 当前请求不能同时设置网络变更和ImageId参数。 | 诊断 |
| 400 | InvalidParameter.InstanceTypeAndDiskConflict | The current operation does not allow both InstanceType and Disk parameter to be set. | 当前请求不能同时设置InstanceType和Disk参数。 | 诊断 |
| 400 | InvalidParameter.InstanceTypeAndImageConflict | The current operation does not allow both InstanceType and ImageId parameter to be set. | 当前请求不能同时设置InstanceType和ImageId参数。 | 诊断 |
| 400 | InvalidParameter.InstanceTypeAndNetworkConflict | The current operation does not allow both InstanceType and network modification parameter to be set. | 当前请求不能同时设置实例规格和网络变更参数。 | 诊断 |
| 400 | MissingParameter.ProvisionedIops | The ProvisionedIops parameter can not be empty. | ProvisionedIops参数不能为空。 | 诊断 |
| 403 | OperationRestricted.Renewal | Your renewal operation is restricted due to availability zone restrictions. | 受可用区调整影响，当前暂不支持对该实例进行续费操作，给您带来不便敬请谅解。 | 诊断 |
| 400 | LastOrderProcessing | The previous order is still processing. Please try again later. | 上一个订单仍正在处理中，请稍后再试。 | 诊断 |
| 500 | InvalidOperation.RefundFailed | Failed to refund. Please try again or submit a support ticket. | 退款失败 | 诊断 |
| 400 | InvalidParameter.SourceIp | The specified param SourceIp is not valid. | 参数SourceIp不合法。 | 诊断 |
| 400 | InvalidParameter.SourceIpOrCidrOnly | The specified SourceIp and sourceCidr should only set one. | 指定的SourceIp和sourceCidr应该只设置一个。 | 诊断 |
| 400 | InvalidOperation.CidrAllocateNotEnough | There is no enough cidr to allocate. | 没有足够的cidr可供分配 | 诊断 |
| 400 | RangeExceede.Ipv6NotInReserved | The specified IPv6 is not in the reserved segment and this operation is not allowed. | IPv6 不在预留段，不允许执行该操作。 | 诊断 |
| 400 | InvalidOperation.IpTargetIpv6CannotBind | The target IPv6 is not assignable, please replace it and try again. | 目标 IPv6 不可分配，请更换后重试。 | 诊断 |
| 403 | InvalidBootMode.SecureBootUnsupported | Secure Boot requires UEFI or UEFI-Preferred boot mode. Please check the BootMode and try again. | 安全启动要求使用 UEFI 或 UEFI-Preferred 启动模式。请检查启动模式后重试。 | 诊断 |
| 403 | InvalidBootMode.SecureBootUnsupported | The specified parameter BootMode does not support Secure Boot. | 指定的 BootMode 参数无效，该启动模式不支持安全启动。 | 诊断 |
| 400 | InvalidParameter.SessionManagerConfig | SessionManagerConfig must contain at least one non-null property. | SessionManagerConfig 必须至少包含一个非空属性。 | 诊断 |
| 403 | OperationFailed.AllocateVfIdFailed | Allocate vfId failed when attach eni, please retry again. | 挂载高密网卡由于并发操作，导致分配vfId失败，重试即可。 | 诊断 |
| 403 | InvalidOperation.TrunkingIsNotAllowed | The account is not authorized to use trunk ENI or perform trunking operation. | 不允许操作中继网卡。您需要确保您的账号允许操作Trunk网卡。如有疑问，请提交工单。 | 诊断 |
| 400 | InvalidParameter.TargetCapacity.OutOfRange | Parameter target capacity is invalid and out of range. | 参数目标容量无效，超出范围。 | 诊断 |
| 400 | InvalidParameter.CpuPlatformUnsupported | The specified CPU platform is not supported. | 所选 CPU 平台不支持，请选择其他 CPU 平台。 | 诊断 |
| 400 | InvalidOperation.ImageCpuPlatformUnsupported | The specified image does not support the specified CPU platform. | 指定镜像不支持所选 CPU 平台，请更换镜像或选择兼容的 CPU 平台。 | 诊断 |
| 400 | InvalidOperation.Ipv4NotSupport | The specify VSwitch of ECS does not support IPv4. | 当前使用的交换机不支持 IPv4。 | 诊断 |
| 400 | MissingParameter.Status | The specified parameter Status is not supplied. | 指定参数 Status 不能为空。 | 诊断 |
| 403 | InvalidOperation.SecureBootRegionNotSupported | Secure Boot is not available in the specified region. | 当前地域不支持开启实例安全启动 | 诊断 |
| 403 | OperationDenied.ZoneDiscontinued | Dear Customer, Alibaba Cloud is planning to optimize and adjust Shanghai Zone K. This availability zone will be discontinued. You are currently unable to place new orders or renew existing orders of this type. Thank you for your support and understanding. | 客户您好，阿里云计划对华东2（上海）可用区K进行优化调整，该区域将停止运营，您目前无法操作购买及续订该类型订单，感谢支持与理解。 | 诊断 |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | 当前可用区已被禁用，不允许创建交换机。 | 诊断 |
| 403 | OperationDenied.ZoneDiscontinued | Dear Customer, Alibaba Cloud is planning to optimize and adjust Shanghai Zone K. This availability zone will cease operations on July 15, 2027 (UTC+8). The service term for your subscribed products must not extend beyond July 15, 2027 (UTC+8). Thank you for your support and understanding. | 客户您好，阿里云计划对华东2（上海）可用区K进行优化调整，该可用区将于2027年7月15日（UTC+8）停止运营，您订购的产品服务期限不能超过2027年7月15日（UTC+8），感谢支持与理解。 | 诊断 |
| 403 | OperationDenied.ZoneDiscontinued | Dear Customer, Alibaba Cloud is planning to optimize and adjust Shanghai Zone K. This availability zone will be discontinued. You are currently unable to place new orders of this type. Thank you for your support and understanding. | 客户您好，阿里云计划对华东2（上海）可用区K进行优化调整，该区域将停止运营，您目前无法操作该类型订单，感谢支持与理解。 | 诊断 |
| 500 | UnknowError | The request processing has failed due to some unknown error. | 由于某些未知错误，请求处理失败。 | 诊断 |
| 400 | InvalidParameter.SecureBootSupport | The specified parameter SecureBootOptions.SecureBootSupport is not valid. | 指定的参数SecureBootOptions.SecureBootSupport不合法。 | 诊断 |
| 400 | Throttling.PageNumberLimited | Request throttled. Please use NextToken instead of PageNumber for pagination. | 当前请求已限流，请使用 NextToken 替代 PageNumber 方式进行分页查询。 | 诊断 |
| 400 | InvalidNotBefore.ExceedInitialNotBefore | The specified 'NotBefore' time cannot be later than the initial 'Notbefore' time. | 指定的计划时间不能晚于初始计划时间 | 诊断 |
| 400 | InvalidNotBefore.EarlierThanCurrentTime | The specified 'NotBefore' cannot be earlier than the current time. | 'NotBefore' 不能早于当前时间 | 诊断 |
| 400 | InvalidParameter.Scatter.Mismatch | Scatters must be positive when setting the scatter policy. | 设置分散策略时，分散必须为正。 | 诊断 |
| 400 | CrossRegion.InvalidParam | Cross-region planning failed: parameter is invalid. | 跨区域规划失败：参数无效。 | 诊断 |
| 400 | RecommendEmpty.InstanceTypeNoStock | Cross-region planning failed: the instance is out of stock. | 跨区域规划失败：实例无库存。 | 诊断 |
| 400 | InvalidParameter.TargetCapacity.OutOfRange | In cross-regional planning, the target capacity must be less than or equal to 100. | 在跨区域规划中，TargetCapacity必须小于等于100。 | 诊断 |
| 400 | InvalidParameter.InstanceType.Empty | Instance types and Instance type families cannot both be empty. | InstanceTypes和InstanceTypeFamilies不能都为空。 | 诊断 |
| 403 | InvalidStatus.StopRequired | Setting up secure boot requires stopping the instance first. | 实例需要处于停机状态才能修改安全选项 | 诊断 |
| 403 | InvalidOperation.ImageSecureBootUnsupported | The image does not support secure boot. | 镜像不支持安全启动。 | 诊断 |
| 403 | InvalidOperation.InstanceTypeSecureBootUnsupported | The instance type does not support secure boot. | 实例规格不支持安全启动。 | 诊断 |
| 403 | ParameterConflict.DataSourceAndSnapshotId | The specified parameter DataSource is incompatible with SnapshotId. You can specify either DataSource or SnapshotId but not both. | 指定的 DataSource 与 SnapshotId 不兼容。您只能指定 DataSource 或 SnapshotId 中的一个不能同时指定两者。 | 诊断 |
| 403 | InvalidParameter.DataSource | Both DataSourceId and DataSourceType must be specified. | 必须同时指定 DataSourceId 和 DataSourceType。 | 诊断 |
| 403 | InvalidDataSource.NotAvailable | The specified DataSource is not available. Please contact the ACS Service team to verify DataSource availability. | 该DataSource不可用，请联系容器ACS服务团队检查资源可用性。 | 诊断 |
| 403 | InvalidParameter.DataSourceType | The specified DataSourceType is not valid. The DataSourceType only supports ImageCache. | 指定的DataSource类型无效。DataSourceType仅支持ImageCache。 | 诊断 |
| 403 | InvalidDataSource.EncryptedResourceNotSupported | Encrypted DataSources are not supported. Please switch to a non-encrypted DataSource and try again. | 不支持加密的DataSource，请更换使用非加密DataSource后重试。 | 诊断 |
| 403 | InvalidParameter.MinMaintenanceInterval | Invalid Parameter MinMaintenanceInterval. | MinMaintenanceInterval 参数设置错误 | 诊断 |
| 403 | InvalidOperation.ReInitUnsupported | The specified disk does not support reInit. | 指定云盘不支持重新初始化。 | 诊断 |
| 403 | InvalidOperation.PrepaidDiskUnsupported | The specified DataSource does not support prepaid disk charge type. | 指定的DataSource不支持预付费磁盘类型。 | 诊断 |
| 403 | UnsupportedUserType | The specified DataSource is not enabled. | DataSource方式创盘功能尚未启用。 | 诊断 |
| 403 | InvalidDataSource.EncryptedResourceNotSupport | The specified encrypted DataSource is not valid. | 指定的加密DataSource资源非法。 | 诊断 |
| 403 | InvalidParameter.DataSource | The specified DataSource id and type cannot be null. | 指定的DataSource id和type不能为空。 | 诊断 |
| 403 | InvalidParameter.DataSourceType | The specified DataSource type is not valid. | 指定的DataSource类型无效。 | 诊断 |
| 403 | InvalidOperation.DataSourceUnsupported | The specified DataSource conflict with SnapshotId or ImageId. | 指定的DataSource与快照Id或镜像Id冲突。 | 诊断 |
| 403 | InvalidDataSource.NotFound | The specified DataSource does not exist. | 指定的DataSource不存在。 | 诊断 |
| 403 | InvalidZoneId.EncryptedUnsupported | The specified ZoneId does not support creating encrypted disks. | 该地域可用区不支持创建加密盘。 | 诊断 |
| 403 | InvalidInstanceType.SecureBootNotSupported | The instance type does not support secure boot. | 实例规格不支持安全启动 | 诊断 |
| 403 | InvalidInstanceStatus.NotStopped | Cannot modify secure boot because the instance is not stopped. | 修改安全启动设置，但是实例未处于停机状态 | 诊断 |
| 403 | InvalidImage.SecureBootNotSupported | Target image does not support secure boot. | 镜像不支持安全启动 | 诊断 |
| 403 | InvalidBootMode.NotUefi | Cannot enable secure boot because the image is not in UEFI mode. | 开启 Secure Boot 但镜像 Boot Mode 非 UEFI 模式 | 诊断 |
| 403 | InvalidInstanceSpec.SecureBootNotSupported | The instance spec does not support secure boot. | 实例规格不支持安全启动 | 诊断 |
| 400 | InvalidCoupon.InsufficientBalance | The coupon balance is insufficient. Please select another coupon and try again, or try again with the default coupon. | 优惠券额度不足，请更换其他优惠券重试，或使用默认优惠券重试。 | 诊断 |
| 400 | InvalidOperation.InstanceTypeNotSupportSriov | The specified instance type does not support ENI Sriov. | 该实例规格不支持弹性网卡的Sriov能力。 | 诊断 |
| 403 | InvalidVscType.ValueNotSupported | The specified VscType does not support. | 指定的VscType不支持 | 诊断 |
| 403 | InvalidOperation.VscReferredByFileSystem | The specified vsc is referenced by the file system and cannot be deleted. | 指定vsc被文件系统引用无法删除 | 诊断 |
| 403 | InvalidParameter.KMSKeyId.CMKUnauthorized | ECS service have no right to encrypt/decrypt your CMK. | ECS服务无权限加密/解密您的CMK密钥。 | 诊断 |
| 400 | Throttling | Request throttled. Please use NextToken instead of PageNumber for pagination. | 请求限流，请使用nextToken的分页方式替代PageNumber的分页方式进行查询。 | 诊断 |
| 400 | InvalidInstanceType.NotSupportCpuOptionsNestedVirtualization | The specified instance type does not support CpuOptions.NestedVirtualization: %s. | 当前规格不支持指定的嵌套虚拟化能力 | 诊断 |
| 403 | InvalidParameter.TooManyDiskIds | The parameter DiskIds contains more than 100 values, which exceeds the maximum allowed. | 参数DiskIds包含超过100个值，超过了参数允许的最大配额。 | 诊断 |
| 403 | InvalidParameter.TooManyDiskIds | The parameter DiskIds contain too many values, the parameter does contain more than 100 values. | 参数DiskIds包含太多的值,该参数做多包含100个值。 | 诊断 |
| 403 | InvalidOperation.EfloInstanceNotSupport | The operation is not supported for EFLO instances. | 灵骏实例不支持该操作. | 诊断 |
| 400 | Vsc.NotBelongToInstance | The specified VSC does not belong to the specified instance. | 指定的VSC不属于当前实例 | 诊断 |
| 400 | InvalidOperation.VscStatusUnsupported | The specified VSC is in a status that does not support this operation. | 指定的VSC当前状态不支持删除操作 | 诊断 |
| 400 | Instance.VscPrimaryExist | The specified instance already has a Primary VSC. | 指定的实例已经有主VSC | 诊断 |
| 400 | InvalidOperation.ipv4NotSupport | The specify VSwitch of ECS does not support IPv4. | 当前使用的交换机不支持 IPv4。 | 诊断 |
| 400 | InvalidOperation.EnablePrimaryIPv6 | The specified ENI can not enable primary IPv6 or already has primary IPv6. | 指定的 ENI 无法开启主 IPv6 或已经含有主 IPv6。 | 诊断 |
| 400 | OperationDenied.InstanceNotSupportVsc | The specified instance does not support VSC operations. | 指定实例不支持 VSC | 诊断 |
| 400 | QuotaExceed.Vsc | The number of VSC for the specified instance has exceeded the quota. | 实例的 VSC 通道数量已达规格上限 | 诊断 |
| 404 | Vsc.NotFound | The specified VSC channel does not exist. | VSC 通道不存在 | 诊断 |
| 403 | CandidateDenied.NoStock | The resource is out of stock and there are no candidate resources in the specified zone. Please try other types, or choose other regions and zones. | 当前实例规格资源已售罄，且短期内无候补资源，请根据需求选择其他实例规格或者可用区。 | 诊断 |
| 403 | InvalidStorageLocationArn.Malformed | The specified parameter StorageLocationArn is wrongly formed. | 指定的参数StorageLocationArn的格式错误。 | 诊断 |
| 403 | InvalidInstanceType.ValueNotSupported | The specified InstanceType does not support the current category of data disk. | 指定的实例规格不支持当前实例挂载的数据盘规格。 | 诊断 |
| 403 | OperationDenied.NoStock | Error happened, %s. | 当前规格没有库存。 | 诊断 |
| 400 | InvalidRecurrenceRules.ActiveHourZero | The specified parameter RecurrenceRules is invalid because the calculated active period is zero. | 参数 RecurrenceRules 无效，计算出的生效时长为零，不符合有效范围。 | 诊断 |
| 403 | InvalidVSwitch.Ipv6NotTurnOn | The VSwitch of ENI does not support IPv6 feature. | 指定的 ENI 所在的 VSwitch 不支持 IPv6 功能。 | 诊断 |
| 403 | IncorrectInstanceStatus | An error occurred: %s. | 由于实例状态不支持，该操作不允许执行。 | 诊断 |
| 403 | InvalidOperation.NetworkTypeUnsupported | The specified network type is not supported in this region. | 该指定网络类型在本地区不支持。 | 诊断 |
| 403 | InvalidOperation.EniTypeUnsupported | The specified eni type does not supported. | 指定的业务类型不支持。 | 诊断 |
| 403 | InvalidOperation.NetworkTypeUnsupport | The specified network type is not support in this region. | 该指定网络类型在本地区不支持。 | 诊断 |
| 403 | InvalidOperation.EniTypeUnsupport | The specified eni type does not support. | 指定的业务类型不支持。 | 诊断 |
| 403 | InvalidOperation.NetworkTypeUnsupport | The network type is not support in this region. | 输入的网络类型NetworkType不再支持。 | 诊断 |
| 403 | InvalidOperation.PrimaryEniNotExist | Primary Eni Not Exist. | 实例主网卡不存在。 | 诊断 |
| 403 | InvalidSnapshotType.WarmUpNotSupported | The specified snapshot type is 'shared', which does not support the warm-up operation. | 指定的快照类型是shared，不支持预热操作。 | 诊断 |
| 403 | InvalidSnapshotCategory.WarmUpNotSupported | The specified snapshot category is 'archive', which does not support the warm-up operation. | 指定的快照种类是archive，不支持预热操作。 | 诊断 |
| 403 | InvalidSnapshotId.LimitExceeded | The number of specified snapshotId exceeds the limit. | 指定的snapshotId个数超过限制 | 诊断 |
| 403 | InvalidZoneId.LimitExceeded | The number of specified zoneId exceeds the limit. | 指定的zoneId个数超过限制。 | 诊断 |
| 403 | InvalidSnapshotStatus.WarmUpNotSupported | The state of the specified snapshot does not support the warm-up operation. | 指定快照的状态不支持预热操作。 | 诊断 |
| 403 | InvalidOperation.EniTypeNotSupport | The specified biz type does not support. | 指定的业务类型不支持。 | 诊断 |
| 403 | InvalidCategory.SnapshotLinkMismatch | The specified category does not match the actual category of the snapshot link. | 指定的category和快照链的不匹配。 | 诊断 |
| 403 | InvalidZoneId.RegionNoSaleZone | There is no available zone for sale in the currently specified region. | 当前地域没有可售卖的可用区 | 诊断 |
| 403 | InvalidZoneId.NotMatchRegion | The currently specified availability zone does not match the region. | 当前指定的可用区和地域不匹配。 | 诊断 |
| 403 | InvalidZoneId.CloudBoxNotSupported | The specified zone for the CloudBox type does not support the current operation. | 指定的云盒可用区不支持当前的操作。 | 诊断 |
| 403 | InvalidMaxConcurrencyCreateDiskCount.Malformed | The specified parameter MaxConcurrencyCreateCount is not valid.Its value must be an integer multiple of 100, with a minimum of 100 and a maximum of 10,000. | 当前指定的参数MaxConcurrencyCreateCount不合法，该参数的有效值是在100至10000的范围内，数值必须是100的整数倍。 | 诊断 |
| 403 | InvalidMaxConcurrentCreateCount.TooSmall | The specified value for the parameter MaxConcurrentCreateCount is less than the currently value. | 指定的参数MaxConcurrentCreateCount的值小于当前生效的值。 | 诊断 |
| 403 | InvalidRetentionHours.Malformed | The specified parameter RetentionHours is not valid. | 指定的参数RetentionHours的值无效。 | 诊断 |
| 403 | InvalidRetentionHours.TooSmall | The specified value for the parameter RetentionHours is less than the currently value. | 指定的参数RetentionHours值小于当前生效值。 | 诊断 |
| 403 | InvalidOperation.SnapshotStatusNotSupported | The specified snapshot does not support this operation in its current state. | 指定的快照状态不支持当前操作。 | 诊断 |
| 403 | InvalidRetentionHours.LongerThanSnapshotExpireTime | The specified RetentionHours parameter for the snapshot is invalid,RetentionHours cannot exceed the snapshot's expired time. | 指定的RetentionHours时间无效，RetentionHours不能超过快照的过期时间。 | 诊断 |
| 403 | InvalidOperation.SnapshotWarmUpNotEnabled | The currently specified snapshot has a preheating task in progress and does not support preheating again. | 指定的快照未启用预热，不支持当前操作。 | 诊断 |
| 403 | InvalidOperation.UserNotInWhiteList | The operation was denied because the current user is not in the whitelist. | 非白名单用户禁止操作。 | 诊断 |
| 403 | InvalidOperation.BidNotInWhiteList | The operation was denied because the current bid is not in the whitelist. | 用户账号注册渠道不在白名单中，不支持当前操作。 | 诊断 |
| 403 | InvalidOperation.RegionNotInWhiteList | The operation was denied because the current region is not in the whitelist. | 当前地域不在白名单中，不支持此操作。 | 诊断 |
| 403 | InvalidOperation.AvailableSnapshotNotSupported | The operation was denied because available snapshots are not supported. | 处于available状态的快照不支持此操作。 | 诊断 |
| 403 | InvalidOperation.ReWarmmingUpNotSuppored | The snapshot does not support re-warm-up. | 快照不支持再次预热。 | 诊断 |
| 403 | InvalidOperation.SnapshotWarmUpFrequencyExceeded | The warm-up frequency for the snapshot in the current availability zone exceeds the limit, the interval between two warm-up operations must be at least 6 hours. | 快照在当前可用区的预热频率超过限制，两次预热的间隔不能少于6个小时。 | 诊断 |
| 403 | InvalidOperation.ModifyConcurrentyCreateCountUnSupported | The current warm-up of the snapshot does not support modifying The current warm-up of the snapshot does not support modifying the maximum concurrent creation count. | 快照当前的预热不支持修改最大并发创建磁盘个数。 | 诊断 |
| 403 | InvalidOperation.WarmUpQuotaExceeded | The warm-up of the specified snapshot in the current availability zone has exceeded the limit. | 指定快照的预热超过当前可用区的预热配额。 | 诊断 |
| 404 | InvalidOperation.WarmUpNotFound | The warm-up for the specified snapshot could not be found. | 未找不指定快照的预热信息。 | 诊断 |
| 404 | InvalidKMSKeyId.NotFound | The specified KMSKeyId does not exist. | 指定的KMS密钥ID不存在。 | 诊断 |
| 404 | InvalidSnapshotLock.NotFound | The specified snapshot(s) %s is(are) not locked. | 指定的快照未被锁定。 | 诊断 |
| 500 | InvalidSecurityGroupId.EniMustHaveSecurityGroup | The specified network card does not have an associated security group. | 指定的网卡没有关联的安全组。 | 诊断 |
| 500 | InvalidParameter.PrivateIpCount | The current privateIpCount is not in the range 1.0 through 100.0. | 当前privateIpCount不在1.0到100.0的范围内。 | 诊断 |
| 403 | OperationDenied | The specified eip is not available or not authorized. | 指定的eip不可用或未经授权。 | 诊断 |
| 400 | InvalidOperation.AllocateIpFailed | Failed to allocate the specific IP, please ensure the IP is available. | 分配特定IP失败，请确保该IP可用。 | 诊断 |
| 403 | InvalidKMSKeyId.NotSupportCrossAccountServiceKey | The ECS service key is only supported for use within the current account and does not support cross-account sharing or usage. | ECS服务密钥仅支持在当前账号内使用，不支持跨账号共享或使用。 | 诊断 |
| 403 | OperationDenied.HpnZoneMismatch | Instance and disk must be in the same HPN zone for restricted HPN zones. | 对于部分受限的HPN区域，实例与磁盘必须位于同一HPN区域内才可执行挂载操作。 | 诊断 |
| 403 | OperationDenied.UnsupportedEncryptedDisk | The instance type does not support attaching encrypted disks. | 实例的规格不支持挂载加密盘。 | 诊断 |
| 400 | InvalidImportImageOptions.DockerOptionsImageMalformed | The specified parameter ImportImageOptions.DockerOptions.Image is invalid. The length should be between 1 to 512 characters. | 指定的Docker镜像长度应在1到512字符之间。 | 诊断 |
| 400 | InvalidImportImageOptions.DockerOptionsImageSizeMalformed | The specified parameter ImportImageOptions.DockerOptions.ImageSize is invalid. The size should be between 1GB to 2048GB. | 指定的Docker镜像大小应在1GB到2048GB之间。 | 诊断 |
| 400 | InvalidDockerRepositoryCredential.DockerRegistryMalformed | The specified parameter DockerRepositoryCredential.DockerRegistry is invalid. The length should be between 1 to 512 characters. | 指定的Docker注册表长度应在1到512字符之间。 | 诊断 |
| 400 | InvalidDockerRepositoryCredential.UserMalformed | The specified parameter DockerRepositoryCredential.User is invalid. The length should be between 1 to 128 characters. | 指定的用户名长度应在1到128字符之间。 | 诊断 |
| 400 | InvalidDockerRepositoryCredential.PasswordMalformed | The specified parameter DockerRepositoryCredential.Password is invalid. The length should be between 1 to 128 characters. | 指定的密码长度应在1到128字符之间。 | 诊断 |
| 404 | MissingImportImageOptions.DockerOptionsImage | The specified parameter ImportImageOptions.DockerOptions.Image is missing. | 指定的参数ImportImageOptions.DockerOptions.Image缺失。 | 诊断 |
| 404 | MissingImportImageOptions.DockerOptions | The specified parameter ImportImageOptions.DockerOptions is missing. | 指定的参数ImportImageOptions.DockerOptions缺失。 | 诊断 |
| 403 | QuotaExceed.StorageSetTotal | The total number of storage sets in the current region has exceeded the quota. | 存储集的总数超过当前地域的配额限制。 | 诊断 |
| 400 | InvalidOperation.TooManyMaintenanceWindows | Too many maintenance windows. | 维护窗口配置数量超过200条，无法再创建新的窗口。 | 诊断 |
| 403 | InvalidOperation.AttachedShareDisk | Attached share disk does not support this operation. | 已挂载的共享盘不支持该操作。 | 诊断 |
| 403 | InvalidOperation.ConflictOnNC | Other instance is awaking or hibernating on the same NC. | 有其他实例在同一个NC上进行操作和当前操作冲突，比如：休眠或者唤醒。 | 诊断 |
| 403 | InvalidDiskSize.NotSupportMultiAttachDisk | The specified disk size exceeds the maximum limit 65536 for enabling multi-attach. | 大于 64 TB 的磁盘不支持开启多重挂载 | 诊断 |
| 400 | QuotaExceeded.AutoProvisioningGroup | The count of AutoProvisioningGroup exceeds the limit. | 弹性供应组数量达到限额。 | 诊断 |
| 403 | PermissionDenied.Report | The instance associated with the repaired diagnostic report does not belong to the current resource group. | 修复的诊断报告关联的实例，不属于当前资源组。 | 诊断 |
| 403 | InvalidParameter.SupportMaintenanceAction | Invalid Parameter SupportMaintenanceAction. | SupportMaintenanceAction 属性设置错误。 | 诊断 |
| 400 | NoPermission.Price | The operation requires price permission. Please either apply for permission from your main account, or set the parameter AutoPay as true. | 该操作需要价格权限。请向您的主账户申请权限，或将参数AutoPay设置为true进行自动支付。 | 诊断 |
| 403 | InvalidInstance.NotFound | The specified instance doesn't exist. | 指定的实例不存在。 | 诊断 |
| 400 | InvalidStatus.ValueNotSupported | The specified issue repairStatus is invalid, and the expected status is null or failed. | 指定issue的repairStatus是无效的，期望的status是空或者failed。 | 诊断 |
| 403 | InvalidParameter.TimePeriod | Invalid Parameter Time Period. | Time Period 属性错误。 | 诊断 |
| 403 | InvalidParameter.TargetResource | Invalid Parameter Target Resource. | TargetResource 属性设置错误。 | 诊断 |
| 403 | InvalidOperation.SnapshotIsLocked | The current operation is not supported because the snapshot is locked. Please wait for the lock to expire before retrying. | 当前操作不支持，因为快照已被锁定。请等待锁定过期后再重试。 | 诊断 |
| 403 | InvalidOperation.CoolOffPeriodExpired | The snapshot is locked in compliance mode, and the cool-off period has expired. The current operation is not supported. | 快照以合规模式锁定且冷静期已结束，不支持当前操作。 | 诊断 |
| 400 | InvalidLockStatus.Malformed | The specified parameter LockStatus is invalid. Please check the valid range for this parameter. | 指定的参数 LockStatus 无效，请检查该参数的取值范围。 | 诊断 |
| 403 | InvalidOperation.LockSharedSnapshotUnsupported | The shared snapshot does not support locking. | 来源为共享的快照不支持锁定。 | 诊断 |
| 400 | InvalidRetentionDays.LessThanLockExpiredTime | The specified parameter RetentionDays is invalid. The RetentionDays should be greater than the snapshot LockExpiredTime. | 指定的参数 RetentionDays 无效。保留时间应大于快照锁定过期时间。 | 诊断 |
| 404 | InvalidSnapshotLock.NotFound | The specified snapshot is not locked. | 指定的快照未被锁定。 | 诊断 |
| 400 | InvalidLockMode.Malformed | The specified parameter LockMode is invalid. Please check the valid range for this parameter. | 指定的参数 LockMode 无效，请检查该参数的取值范围。 | 诊断 |
| 400 | InvalidLockDuration.ExceedRetentionDays | The specified parameter LockDuration is invalid. The LockDuration should be less than the snapshot RetentionDays. | 指定的参数 LockDuration 无效，锁定时长应小于快照保留时间。 | 诊断 |
| 400 | InvalidCoolOffPeriod.ExceedLockDuration | The specified parameter CoolOffPeriod is invalid. The CoolOffPeriod should be less than the LockDuration. | 指定的参数 CoolOffPeriod 无效，冷静期应小于锁定时长。 | 诊断 |
| 403 | InvalidOperation.SnapshotNotAvailable | The unavailable snapshot does not support locking. | 不可用的快照不支持锁定。 | 诊断 |
| 403 | InvalidOperation.ResourceManagedByCloudProduct | The current operation is not supported because the resource is managed by a cloud product [%s]. Please contact the relevant cloud product to confirm the reason. | 此次操作不支持因为资源被云产品托管。请联系对应的云产品确认原因。 | 诊断 |
| 403 | MissingParameter.SizeOrArchiveSize | The parameters Size and ArchiveSize cannot both be empty. | 参数Size和ArchiveSize不能都为空。 | 诊断 |
| 403 | AccountRestricted.ParnterPolicy | Your account is restricted from opening postpaid service by your partner, please contact your partner. | 您的账号被生态伙伴限制开通按量产品，请联系您的生态伙伴。 | 诊断 |
| 400 | InvalidParameter.EniQosConfig | The specified ENI QoS configuration is not valid. | 指定的弹性网卡 QoS 限速设置不合法。 | 诊断 |
| 403 | DEPLOYMENT_SET_SHARED | The deployment set is shared and cannot be deleted. | 部署被共享，不允许删除 | 诊断 |
| 403 | DEPLOYMENT_SET_STRATEGY_NOT_SUPPORT_OPERATION | Deployment set strategy does not support operation. | 部署集策略不允许当前操作 | 诊断 |
| 404 | InvalidReservedInstanceId.NotFound | The specified ReservedInstanceId resource does not exist. | 指定的ReservedInstanceId资源不存在。 | 诊断 |
| 404 | InvalidStorageCapacityUnitId.NotFound | The specified StorageCapacityUnitId does not exist. | 指定的StorageCapacityUnitId资源不存在。 | 诊断 |
| 404 | InvalidImagePipelineExecutionId.NotFound | The specified ImagePipelineExecutionId does not exist. | 指定的ImagePipelineExecutionId资源不存在。 | 诊断 |
| 404 | InvalidCarePlanId.NotFound | The specified CarePlanId does not exist. | 指定的CarePlanId资源不存在。 | 诊断 |
| 404 | InvalidReservedInstanceId.NotFound | The specified ReservedInstanceId does not exist. | 指定的ReservedInstanceId资源不存在。 | 诊断 |
| 403 | InvalidOSS.NotAuthorized | The specified OSS bucket or object is not allowed to access. | 您没有权限访问指定的OSS的bucket和Object。 | 诊断 |
| 400 | OperationDenied.HibernationConcurrency | The hibernation request for the specified instance is restricted due to hibernation in execution by other instances. | 指定实例的休眠请求因其他实例执行中的休眠操作而受到限制。 | 诊断 |
| 400 | InvalidMarketImage.NotAuthorized | The specified marketplace image is not authorized for your channel, please use other image. | 指定的市场镜像没有对您的渠道授权，请使用其他镜像。 | 诊断 |
| 503 | LimitedOperation.ServiceUnavailable | The service is currently unavailable. Please try again later. | 当前服务不可用。请稍后重试。 | 诊断 |
| 403 | OperationFail.AcceptRecoverFail | Failed to accept system event due to resource constraints. | 因底层资源不足，响应事件失败。 | 诊断 |
| 400 | SnapshotService.AlreadyOpened | The snapshot service has already been opened, no need to open again. | 快照服务已经开通，请不要重复开通。 | 诊断 |
| 400 | InvalidExecutionId.SizeExceeded | ExecutionId list exceeds maximum size of %s. Current size is %s. | 您设置的ExecutionId列表大小超过了允许的最大值。 | 诊断 |
| 403 | InvalidOperation.StoppedModeUnsupported | The specified instance is StopCharging. | 无法操作处于节省停机模式的实例 | 诊断 |
| 403 | InvalidOperation.DefaultFreeSnapshotNotSupport | The specified snapshot is a default free snapshot and does not support this operation. | 指定的快照是一个默认免费快照，不支持当前操作。 | 诊断 |
| 403 | InvalidOperation.DiskAttachModeUnsupported | The instance type does not support the disk attach mode. | 当前实例规格不支持磁盘的挂载模式 | 诊断 |
| 400 | InvalidOSSBucket.ArchiveOssBucketNotSupported | Exporting an image to an OSS bucket with Archive, Cold Archive, or Deep Cold Archive storage class is not supported. | 不支持将镜像导出到存储类型为归档存储、冷归档存储或深度冷归档存储的OSSBucket中。 | 诊断 |
| 409 | Oss.BucketAlreadyExists | The requested bucket name is already taken. | 您所创建的 Bucket 名称（OssBucketName）已被其他阿里云账号占用，请更换一个 Bucket 名称后重试。 | 诊断 |
| 400 | InvalidDetectionStrategy.Malformed | The specified value for parameter DetectionStrategy is not supported. Please refer to the documentation for accepted values. | 不支持指定的DetectionStrategy参数值。请参考文档了解可接受的值。 | 诊断 |
| 400 | InvalidOperation.Throttling | The specified operation is not supported due to concurrency throttling. | 指定的休眠唤醒操作由于其他未完成的休眠唤醒进程而被限流。 | 诊断 |
| 400 | InvalidOperation.InsufficientResources | Specified waking up operation is failed due to insufficient physical server resource. | 指定的唤醒操作因物理服务器资源不足而失败。 | 诊断 |
| 404 | InvalidOssOutputDelivery.BucketNotFound | The OSS bucket specified in the parameter OssOutputDelivery does not exist. | 参数OssOutputDelivery中指定的bucket不存在。 | 诊断 |
| 403 | CreateServiceLinkedRole.NoPermission | You do not have permission to create ServiceLinkedRole for output delivery. | 您没有为output投递功能创建服务关联角色的权限。 | 诊断 |
| 400 | InvalidOssOutputDelivery.BucketInOtherRegion | The OSS bucket specified in the parameter OssOutputDelivery is in another region. | 参数OssOutputDelivery 中指定的 OSS bucket在其他地域。 | 诊断 |
| 400 | InvalidOssOutputDelivery.KeyPrefixMalformed | The prefix of the OSS key specified in the parameter OssOutputDelivery is not valid. | 参数OssOutputDelivery中指定的prefix不合法。 | 诊断 |
| 400 | InvalidParameter.OssOutputDelivery | The specified parameter OssOutputDelivery is not valid. | 指定的参数OssOutputDelivery不合法。 | 诊断 |
| 400 | InvalidParameter.CheckId | The parameter checkId:%s is invalid. | 无效的CheckId。 | 诊断 |
| 400 | Oss.BucketNameInvalid | The bucket name is invalid. It must start with "sg-snapshot" and comply with OSS bucket naming conventions: 1) be comprised of lower-case characters, numbers or dash(-), 2) start with lower case or numbers, 3) be between 3-63 characters long. | Bucket 名称无效。名称必须以 "sg-snapshot" 开头，且符合 OSS Bucket 命名规范：长度为 3 至 63 个字符，仅允许使用小写字母、数字和短横线（-），不能以短横线开头或结尾，且在整个 OSS 范围内必须全局唯一。当前提供的名称未满足上述要求，请检查并修正后重试。 | 诊断 |
| 409 | OSS.BucketAlreadyExists | The requested bucket name is already taken. | 您所创建的 Bucket 名称（OssBucketName）已被其他阿里云账号占用，请更换一个 Bucket 名称后重试。 | 诊断 |
| 404 | InvalidDedicatedHostId.NotFound | The specified Dedicated Host does not exist. | 指定的专有宿主机不存在。 | 诊断 |
| 404 | InvalidResource.NotFound | The specified resource not exists. | 指定的资源不存在 | 诊断 |
| 403 | InvalidOperation.InsufficientCoupon | Failed to use the coupon, probably because the coupon has been used up, please try again. | 优惠券抵扣失败，可能因为已被用完或剩余额度不足，请重试操作。 | 诊断 |
| 400 | InvalidOperation.ElasticityAssuranceActiveTimeTooShort | The total active time of the ElasticityAssurance is too short. | 弹性保障服务的总生效时间太短。 | 诊断 |
| 403 | InvalidAccount.NotSupportEA | According to business rules, this account cannot purchase ECS ElasticityAssurance. | 根据业务规则，此账号不能购买ECS弹性保障服务。 | 诊断 |
| 403 | QuotaExceed.ElasticityAssuranceCapacity | ElasticityAssurance Capacity quota exceeded. | 弹性保障服务容量配额超出限制。 | 诊断 |
| 403 | InvalidEncryptionOptions.Conflict | The parameter PortNumber or TargetServer cannot be specified with parameter EncryptionOptions. | 开启会话加密时，不允许指定参数PortNumber或TargetServer。 | 诊断 |
| 403 | InvalidParameter.EncryptionOptionsMode | The specified parameter EncryptionOptions.Mode is not valid. | 指定的参数 EncryptionOptions.Mode 不合法。 | 诊断 |
| 403 | MissingParameter.EncryptionOptionsKMSKeyId | The input parameter EncryptionOptions.KMSKeyId that is mandatory for processing this request is not supplied. | 参数 EncryptionOptions.KMSKeyId 不能为空。 | 诊断 |
| 403 | InvalidParameter.EncryptionOptionsKMSKeyId | The specified parameter EncryptionOptions.KMSKeyId is not valid. | 指定的参数EncryptionOptions.KMSKeyId 不合法。 | 诊断 |
| 403 | InvalidEncryptionOptionsMode.EncryptionDisabled | EncryptionOptions.Mode cannot be specified when encryption is disabled. | 当会话加密未开启时，无法指定参数 EncryptionOptions.Mode。 | 诊断 |
| 403 | InstanceLockedForSecurity | The instance is locked for security reasons. Please contact Security Technical Support for assistance. | 该实例由于安全原因被锁定，您可以联系安全技术支持。 | 诊断 |
| 400 | InvalidParameter.AttributeNotSupported | The specified value for parameter Attribute is not supported. Valid values: snapshotPolicyIds. | 参数 Attribute 的指定值不被支持。有效值为：snapshotPolicyIds。 | 诊断 |
| 400 | InvalidRegion.NotSupportResourceGroup | The specified region does not support resource groups. | 指定的地域不支持资源组 | 诊断 |
| 400 | MarketplaceImageOrdersLimitExceeded | The number of marketplace image orders has exceeded the maximum limit of 20, please reduce the number of marketplace image instances and try again. | 市场镜像订单超过最大限制20个，请减少市场镜像实例个数重试。 | 诊断 |
| 400 | InvalidInstanceMetadataTags.NotSupported | The specified InstanceMetadataTags is invalid, valid options are enabled or disabled. | 指定的InstanceMetadataTags无效，有效的取值为enable或者disabled。 | 诊断 |
| 403 | InvalidOperation.DiskNotSupport | The disk on the instance does not support this operation. | 实例上的磁盘不支持此操作。 | 诊断 |
| 403 | QuotaExceed.ConcurrentArchiveSnapshotQuota | The number of concurrent archiving tasks associated with the disk of the current snapshot has exceeded the quota limit. Please try again later. | 当前快照关联的磁盘并行的归档任务数量超过配额限制，请稍后重试。 | 诊断 |
| 400 | InvalidParameter.NetworkOptionsBandwidthWeighting | The specified parameter BandwidthWeighting is not valid.The correct value should be in [%s]. | 当前指定的参数BandwidthWeighting无效。 | 诊断 |
| 403 | ParameterConflict.AutoSnapshotPolicyIdAndDiskId | The AutoSnapshotPolicyId and DiskId parameters cannot be specified at the same time. You may specify only one of them. | AutoSnapshotPolicyId 和 DiskId 参数不能同时指定。您只能指定其中一个。 | 诊断 |
| 403 | MissingParameter.AutoSnapshotPolicyIdOrDiskId | The AutoSnapshotPolicyId and DiskId parameters cannot both be empty. Please specify one of them. | AutoSnapshotPolicyId 和 DiskId 参数不能同时为空，请指定其中一个。 | 诊断 |
| 403 | OperationDenied.TooManyAutoSnapshotPolicies | The specified disk %s has already applied multiple auto snapshot policies. To cancel a policy, please explicitly specify the autoSnapshotPolicyId parameter. | 指定的云盘已应用多条自动快照策略，请使用 autoSnapshotPolicyId 参数明确指定需要取消的自动快照策略。 | 诊断 |
| 403 | InvalidOperation.AutoSnapshotPolicyConflict | The disk %s cannot apply the auto snapshot policy of promotional activities and other policies at the same time. | 云盘不允许同时应用免费运营活动快照策略和其他策略。 | 诊断 |
| 403 | QuotaExceed.AppliedAutoSnapshotPolicyQuota | The number of auto snapshot policies applied to the specified disk %s has exceeded the quota %s. Please cancel any unused policies and try again. | 指定的云盘应用的自动快照策略数量已超过配额，请取消无用的策略后重试。 | 诊断 |
| 403 | InvalidPeriod.RegionDiscontinued | Alibaba Cloud is scheduled to make adjustments in the Fuzhou region. Cloud services in this region will be suspended, this type of order cannot be managed. Please use other regions, thank you for your understanding and support. | 客户您好，阿里云计划对福州地域进行优化调整，该区域云服务将停止运营，您目前无法操作该类型的订单。请使用其他地域，感谢您的理解与支持。 | 诊断 |
| 403 | InvalidPeriod.RegionDiscontinued | Alibaba Cloud is scheduled to make adjustments in the Nanjing region. Cloud services in this region will be suspended, this type of order cannot be managed. Please use other regions, thank you for your understanding and support. | 客户您好，阿里云计划对南京地域进行优化调整，该区域云服务将停止运营，您目前无法操作该类型的订单。请使用其他地域，感谢您的理解与支持。 | 诊断 |
| 403 | InvalidOperation.CopyingDataToThisRegionUnsupported | Data transfer to the current region from other regions is not supported. | 不支持从其他地域复制数据到当前地域。 | 诊断 |
| 403 | InvalidOperation.CopyingDataFromThisRegionUnsupported | This region is restricted to copying data to specific regions %s. | 当前地域只能复制数据到某些地域。 | 诊断 |
| 403 | InvalidOperation.PublicImageUnsupported | The community image's publisher is not the current account. Modification is not permitted. | 社区镜像的发布者不是当前账户。不允许修改。 | 诊断 |
| 400 | InvalidParameterRange.MinTargetCapacity | The MinTargetCapacity exceeds the limit[0-TotalTargetCapacity]. | 目标最小容量超出限制[0-总容量]. | 诊断 |
| 404 | InvalidDeploymentSetId.NotFound | The DeploymentSetId provided does not exist in our records. | 找不到对应的部署集 | 诊断 |
| 400 | VpcMismatch.SecurityGroupAndVSwitch | Specified security group and virtual switch are not in the same VPC. | 指定的安全组与虚拟交换机不在同一专有网络中。 | 诊断 |
| 400 | InvalidBootMode.Malformed | The specified parameter BootMode is invalid. Valid options are BIOS, UEFI, and UEFI-Preferred. | 指定的BootMode参数无效。有效选项包括BIOS、UEFI和UEFI- preferred。 | 诊断 |
| 403 | InvalidDiskId.CountLimitExceeded | The specified parameter length exceeds the maximum 100 limit. Check the parameters and try again. | 指定的参数长度超过最大100的限制，请检查参数参数后重试。 | 诊断 |
| 400 | InvalidBootMode.Malformed | The specified parameter "BootMode" is not valid. | 指定的参数“BootMode”不合法。 | 诊断 |
| 400 | InvalidMinTargetCapacity.NotSatisfied | The inventory of specified InstanceType does not meet the MinTargetCapacity. | 实例类型对应的库存不能满足目标最小容量。 | 诊断 |
| 400 | InvalidMinTargetCapacity.ValueNotSupported | The MinTargetCapacity exceeds the limit[0-TotalTargetCapacity]. | 目标最小容量超出限制[0-总容量]. | 诊断 |
| 400 | InvalidInstanceType.NetworkOptionsBandwidthWeightingUnsupported | The current instance type does not support setting or modifying the BandwidthWeighting parameter. | 当前的实例规格不支持设置或修改带宽权重。 | 诊断 |
| 400 | InvalidParameter.NetworkOptionsBandwidthWeighting | The specified parameter BandwidthWeighting is not valid. | 指定的参数BandwidthWeighting无效。 | 诊断 |
| 400 | OperationDenied.NoEniStock | The requested resource of ENI is insufficient in the specified ECS, please retry or upgrade to enterprise-level computing instance types. | 当前实例上的 ENI 库存资源不足，请重试或升配到企业级规格。 | 诊断 |
| 403 | AccountEnterpriseStatusInvalid | Your enterprise registration is marked as revoked/deregistered in the National Enterprise Credit Information Publicity System. Account transaction features (purchase/renewal/recharge) are disabled. Please update real-name certification via Account Center. Restrictions will auto-remove after verification. | 您企业的登记状态在国家企业信用信息公示系统内查询已是注销（或吊销）状态，您的账号将无法进行产品新购、续费、充值等交易操作。请您尽快通过账号中心变更实名认证。变更完成后，阿里云会自动解除限购处置。 | 诊断 |
| 404 | InvalidMetricSetId.NotExist | The specified MetricSetId does not exist. | 诊断项集合不存在。 | 诊断 |
| 403 | InvalidOperation.SnapshotStorageLocationUnsupported | Snapshots with storage location in CloudBox do not support the current operation. | 存储位置在CloudBox中的快照不支持当前操作。 | 诊断 |
| 403 | InvalidOperation.AccountUnsupported | Order placement is restricted due to prohibited tags. Please contact your distributor to unfreeze your account. | 存在禁止下单的标签不可下单，请联系您的分销商解冻。 | 诊断 |
| 403 | InvalidOperation.CloudBoxImageCreateUnsupported | Public cloud snapshots cannot be used to create CloudBox images. | 公有云快照不能用于创建云盒镜像。 | 诊断 |
| 403 | InvalidOperation.CloudBoxImageCopyUnsupported | Copying CloudBox images is not supported. | 云盒镜像不支持复制。 | 诊断 |
| 403 | InvalidOperation.CloudBoxImageCreateUnsupported | Public cloud snapshots cannot be used to create Cloud Box images. | 公有云快照不能用于创建云盒镜像。 | 诊断 |
| 403 | InvalidOperation.CopyingDataToThisRegionUnsupported | Only Some Regions %s can copy data to this region. | 只有某些地域可以复制数据到当前地域。 | 诊断 |
| 403 | InvalidOperation.CopyingDataFromThisRegionUnsupported | Data transfer from the current region to other regions is not supported. | 不支持从当前地域复制数据到其他地域。 | 诊断 |
| 403 | InvalidParameter.ResourceOwnerId | Caller is forbidden to call with parameter ResourceOwnerId. | ResourceOwnerId参数不能在请求中进行传递 | 诊断 |
| 404 | InvalidVSwitchId.NotFound | The specified virtual switch %s does not exist. | 指定的交换机不存在。 | 诊断 |
| 400 | InvalidOperation.InstanceStatusUnsupported | The specified instance status does not support modification of confidential computing mode. | 当前实例状态不支持修改加密计算模式 | 诊断 |
| 400 | InvalidParameterAuthorized.GpuOptionsConfidentialComputing | The specified parameter confidential computing mode is unauthorized. | 当前指定的实例GPU加密计算模式参数值未获得授权。 | 诊断 |
| 400 | InvalidParameter.GpuOptionsConfidentialComputing | The specified parameter confidential computing mode is not valid. | 当前实例GPU加密计算模式的枚举值不合法。 | 诊断 |
| 403 | InvalidParameter.UnauthorizedStorageLocationArn | The operation has failed due to lack of permission for the specified "StorageLocationArn". Please use a resource with appropriate permission for the operation. | 当前操作因为指定的StorageLocationArn权限不足失败，请联系该资源的管理员获取操作权限。 | 诊断 |
| 400 | InvalidInstanceType.GpuOptionsConfidentialComputingUnsupported | The specified instance type does not support the confidential computing mode. | 当前实例规格不支持使用加密计算模式。 | 诊断 |
| 400 | Throttling.System | Request was denied due to system-level request throttling. | 请求因当前时间点系统维度超限而被拒绝，请稍后重试。本账号流控限值并未超限。 | 诊断 |
| 400 | InvalidInstanceType.GpuOptionsConfidentialComputingUnSupported | The specified instance type does not support the confidential computing mode. | 当前实例规格不支持使用加密计算模式。 | 诊断 |
| 400 | InvalidOperation.TrunkAttachmentMustEmpty | The Attachment of the current Trunk type Network Interface must be empty when modify EnableSriov to true. | 当修改EnableSriov为true时，Trunk网卡挂载的设备必须为空 | 诊断 |
| 400 | InvalidDestinationZoneId.DiskCategoryUnsupported | The specified disk category does not allow the DestinationZoneId parameter for this operation. | 该磁盘的磁盘类型不支持在变配时指定 DestinationZoneId | 诊断 |
| 403 | InvalidOperation.PtpStatusAlreadyEnabled | The specified instance already has PTP enabled. | 指定实例已开启 PTP. | 诊断 |
| 400 | InvalidParameter.PtpStatus | The specified parameter PtpStatus: %s is not valid. | PTP 时钟状态值不合法。 | 诊断 |
| 400 | InvalidInstanceType.NotSupportEnablePtp | The specified instance type does not support enable PTP. | 指定规格不支持开启 PTP。 | 诊断 |
| 403 | InvalidOperation.PtpStatusAlreadyDisabled | The specified instance does not have PTP enabled. | 指定的实例未开启 PTP。 | 诊断 |
| 403 | OperationDenied.HardwareNotSupportEnablePtp | The hardware of the instance does not support enable PTP. | 指定的实例所在硬件不支持开启 PTP, 请关机后开启 PTP，然后再启动实例。 | 诊断 |
| 403 | OperationDenied.ClockPtpNoStock | The resource of PTP is out of usage. | PTP 库存资源不足 | 诊断 |
| 400 | InvalidParameter.EniEnhancedNetwork | The input parameter "EnhancedNetwork" is illegal, when EnableSriov is true, VirtualFunctionTotalQueueNumber must not be empty, and VirtualFunctionQuantity must be 1 to 256. When EnableSriov is empty or false, VirtualFunctionTotalQueueNumber and VirtualFunctionQuantity must be empty. | 指定的网络增强功能参数不合法，当EnableSriov设置为true时，VirtualFunctionTotalQueueNumber必须不为空，且VirtualFunctionQuantity取值范围1-256；当EnableSriov为空或设置为false时，VirtualFunctionTotalQueueNumber和VirtualFunctionQuantity必须为空 | 诊断 |
| 400 | InvalidOperation.TrunkAttachmentMustEmpty | The trunk attachment must be empty when modify EnableSriov to true. | 当修改EnableSriov为true时，Trunk网卡挂载的设备必须为空 | 诊断 |
| 400 | InvalidOperation.NotSupportModifyVFQueueNumberAndVFQuantity | The ENI not support modify VirtualFunctionTotalQueueNumber and VirtualFunctionQuantity when EnableSriov is true. | 当EnableSriov为true时，不支持修改VirtualFunctionTotalQueueNumber和VirtualFunctionQuantity | 诊断 |
| 404 | InvalidVSwitchId.NotExist | The VSwitchId %s provided does not exist in our records. | 找不到指定的交换机。 | 诊断 |
| 400 | VpcMismatch.VSwitchIdsNotInSameVpc | The VSwitchIds do not belong to the same VPC. | 指定的交换不属于同一个VPC。 | 诊断 |
| 400 | InvalidParameter.SecurityGroupIdRepeated | The SecurityGroupId is repeated. | 安全组重复。 | 诊断 |
| 404 | InvalidSecurityGroupId.NotFound | The SecurityGroupId %s provided does not exist in our records. | 提供的安全组不存在。 | 诊断 |
| 403 | InvalidOperation.CMKUnauthorized | The CMK(Customer Master Key) lacks authorization to add tags to the ECS service. | 主密钥需要授权ECS服务添加标签权限。 | 诊断 |
| 403 | InvalidOperation.CMKNotEnabled | The CMK (Customer Master Key) must be in an active state. | 主密钥必须处于启用状态。 | 诊断 |
| 400 | InvalidDiskSize.ExceedsMultiAttachLimit | The specified disk size exceeds the maximum limit 65536 for enabling multi-attach. | 如果想使用多重挂载盘，那么磁盘大小不能超过 65536 GB | 诊断 |
| 400 | InvalidParameter.DestinationZoneIdUnsupportedForDiskCategory | The specified disk category does not allow the DestinationZoneId parameter for this operation. | 该磁盘的磁盘类型不支持在变配时指定 DestinationZoneId | 诊断 |
| 400 | MissingParameter.DestinationZoneId | The parameter DestinationZoneId must be specified when modifying the disk specification from a regional disk to a zone disk. | 同城冗余磁盘变配到可用区级别磁盘时，一定要指定 DestinationZoneId | 诊断 |
| 400 | InvalidDestinationZoneId.Mismatch | The specified DestinationZoneId of the regional disk with 'In-use' status should remain consistent with the ZoneId of instance. | 挂载中的同城冗余磁盘执行变配操作，要求指定的 DestinationZoneId 必须和实例一致 | 诊断 |
| 400 | InvalidOperation.MultiAttachRegionalDiskUnsupported | The multi-attach regional disk with 'In-use' status attached to more than one instance is not allowed to modify disk spec. | 挂载中的多重挂载同城冗余磁盘，要求磁盘仅能挂载到一台实例上，才能执行变配操作 | 诊断 |
| 403 | SpotTargetCapacityLimitExceed | The SpotTargetCapacity exceeds the limit[0-2000]. | SpotTargetCapacity超过限制范围[0-2000]. | 诊断 |
| 403 | TotalTargetCapacityLimitExceed | The TotalTargetCapacity exceeds the limit[0-2000]. | TotalTargetCapacity值超过限制[0~2000]。 | 诊断 |
| 403 | PayAsYouGoTargetCapacityLimitExceed | The PayAsYouGoTargetCapacity exceeds the limit[0-2000]. | PayAsYouGoTargetCapacity容量超过限制[0-2000]。 | 诊断 |
| 400 | InvalidImageOwnerAlias.PublicImageUnsupported | When querying images, the parameter ImageOwnerAlias should be others while specified parameter IsPublic is true. | 查询镜像时，参数IsPublic是true，则参数ImageOwnerAlias必须是others。 | 诊断 |
| 400 | InvalidParameter.KeypairAlreadyAttachedInstance | The specified parameter "KeyPairNames" attached to instances %s can not be deleted. | 指定的密钥对已经绑定了实例，无法被删除。 | 诊断 |
| 403 | InvalidParameterRange.Amount | The specified parameter Amount should be greater than 0. | 指定的参数Amount应该大于0 | 诊断 |
| 404 | InvalidInstanceId.NotFound | The specified InstanceId does not exist. | 指定的实例ID无效。 | 诊断 |
| 403 | InvalidDiskCategory.InstanceTypeUnsupported | The current instance type does not support the specified disk category. Please check the list of disk category supported by the instance type and select an appropriate disk category for configuration. | 当前实例类型不支持指定的磁盘类别。请检查该实例类型支持的磁盘类型列表，并选择合适的磁盘类别进行配置。 | 诊断 |
| 403 | InvalidOperation.VhdImageUnsupported | The specified vhd image is not supported for this operation. Please switch to a raw image and retry. | vhd格式镜像不支持该操作，请切换使用raw格式镜像后重试。 | 诊断 |
| 403 | InvalidOperation.SessionManagerDeliveryUnsupported | The delivery configuration of Session Manager is not supported. | 不支持启用Session Manager投递配置。 | 诊断 |
| 403 | InvalidOperation.ConnectionTypeUnsupported | The operation is not supported for the parameter ConnectionType. | 指定的参数ConnectionType不支持该操作。 | 诊断 |
| 400 | InvalidParameter.ConnectionType | The specified parameter ConnectionType is not valid. | 指定的参数ConnectionType不合法。 | 诊断 |
| 403 | InvalidOperation.ServiceKeyEncryptedImageUnsupported | The specified service key encrypted image is not supported for this operation. Please switch to a CMK (Customer Master Key) encrypted image and retry. | 服务密钥镜像不支持该操作，请更换使用CMK密钥后重试。 | 诊断 |
| 400 | InvalidParameter.PortRange | The specified parameter PortRange is not valid. It should be two integers less than 65535 in specified format. | 端口列表中的条目PortRange不符合格式要求。应该指定小于65535的两个整数，用斜杠分隔。 | 诊断 |
| 400 | InvalidMaxEntries.LessThanCurrentEntries | The specified MaxEntries is less than current entries. | 端口列表最大条目数，小于当前条目数量。 | 诊断 |
| 400 | InvalidParameter.PortRangeListName | The specified parameter PortRangeListName is not valid. | 指定的端口列表名称不合法。 | 诊断 |
| 400 | LimitExceed.MaxEntries | The number of entries exceeds the MaxEntries of the specified PortRangeList. | 端口列表中的条目数量超过了MaxEntries的值。 | 诊断 |
| 400 | InvalidParameter.PortRangeDuplicated | The specified PortRange is duplicated. | 指定的端口范围存在重复。 | 诊断 |
| 400 | MissingParameter.Source | One of the parameters SourceCidrIp, SourceGroupId or SourcePrefixListId must be specified. | 安全组规则的源必须被指定，请指定SourceCidrIp、SourceGroupId或SourcePrefixListId参数中的任何一个。 | 诊断 |
| 400 | LimitExceed.PortRangeListId | The specified number of PortRangeListId exceeds the limit. | 指定的端口列表ID数量超出了数量限制。 | 诊断 |
| 400 | InvalidSecurityGroupId.Malformed | The specified parameter "SecurityGroupId" is not valid. | 指定的参数SecurityGroupId不合法。 | 诊断 |
| 400 | InvalidIpProtocol.ValueNotSupported | The specified parameter IpProtocol should not be null and only tcp, udp, icmp, gre or all is supported. Ignore case. | 指定的协议类型不能为空，且必须为合法的值。 | 诊断 |
| 400 | InvalidSourceOrDestGroupId.DirectionMissmatch | The specified SourceGroupId or DestGroupId does not match the direction of the rule. | 指定的SourceGroupId或DestGroupId与安全组规则的方向不匹配。 | 诊断 |
| 400 | InvalidOperation.ModifyPortRangeType | The PortRange type is not allowed to be modified. You cannot modify a rule from using the port list to not using it, and vice versa. | 安全组规则的端口范围类型不能修改。您不能将规则从使用端口列表改为不使用，反过来也不行。 | 诊断 |
| 400 | InvalidOperation.EntryCountExceedMaxEntries | The number of entries in the port list exceeds MaxEntries. | 指定的条目数量超过了端口列表的MaxEntries的值。 | 诊断 |
| 400 | InvalidOperation.MaxEntriesCountExceed | The specified MaxEntries exceeded the upper limit. | 指定的MaxEntries参数超过了最大限制值。 | 诊断 |
| 400 | InvalidPortRangeListId.NotFound | The specified port range list was not found. | 未找到指定的端口列表。 | 诊断 |
| 400 | InvalidPortRangeListId.AssociationExist | The specified port range list has association resources. | 端口列表存在已关联资源。 | 诊断 |
| 400 | InvalidOperation.MaxCountExceed | The number of port range list in the current account has exceeded quota. | 当前账号下的端口列表数量，超出了用户账号端口列表数量的限制。 | 诊断 |
| 400 | InvalidOperation.Conflict | The port range list has conflict task. | 端口列表存在冲突的任务。 | 诊断 |
| 400 | InvalidParameter.CpuOptionsTurboMode | The specified parameter TurboMode is not valid. | 指定的参数频率模式无效 | 诊断 |
| 400 | InvalidInstanceType.EnableNVSUnsupported | The specified instance type does not support EnableNVS. | 指定实例类型不支持开启NVS功能 | 诊断 |
| 400 | InvalidInstanceType.EnableVISSTUnsupported | The specified instance type does not support EnableVISST. | 指定实例类型不支持开启VISST功能 | 诊断 |
| 400 | InvalidInstanceType.EnableVRDTUnsupported | The specified instance type does not support EnableVRDT. | 指定实例类型不支持开启VRDT功能 | 诊断 |
| 400 | InvalidInstanceType.SingleCoreMaxModeUnsupported | The specified instance type does not support TurboMode: "SINGLE CORE MAX". | 指定实例类型不支持开启单核最大睿频模式 | 诊断 |
| 403 | InvalidStatus.ImageIsCreating | The operation cannot be performed because the image is creating. Please wait until the creation is complete and try again. | 镜像还在创建中，该操作无法执行，请等待创建完毕再重试。 | 诊断 |
| 400 | InvalidImdsAccessPolicyId.NotFound | The specified parameter ImdsAccessPolicyId is not found. | 指定的参数ImdsAccessPolicyId没有找到。 | 诊断 |
| 404 | InvalidImageId.NotFound | The specified image is not found, please make sure image is exist in current region or image status is available. | 没有找到指定的镜像，请确保镜像在当前区域存在或镜像状态可用。 | 诊断 |
| 500 | CreateSnapshot.Failed | The current request encountered an error during processing. Please try again later. If your request uses idempotency, generate a new idempotency token and retry the operation. | 当前请求处理过程中发生错误，请稍后重试。如果您的请求使用了幂等，请重新生成幂等令牌后重试。 | 诊断 |
| 403 | IncorrectInstanceStatus | The status of the instance attached to the current disk does not support this operation. The expected status of the instance is running or stopped, and cannot be expired or overdue. | 当前磁盘挂载的实例状态不支持此操作，期望的实例状态是运行中或者已停止，不能处于过期或者欠费的状态。 | 诊断 |
| 403 | IncorrectDiskStatus | This operation is not supported for the current disk status. The disk must be In Use or Available to continue. | 磁盘状态不支持当前操作，磁盘状态必须是InUse或者Available才能继续。 | 诊断 |
| 400 | InvalidOperation.CloudAssistantNotReady | Cloud Assistant is not installed, or the service is unavailable. Install Cloud Assistant or check the status of Cloud Assistant first. | 云助手没有安装或者服务不可用，请先安装云助手或者检查云助手状态。 | 诊断 |
| 403 | InvalidPayMethod.SyncPaymentNotSupport | Synchronous payment is not supported. Use another payment method. | 不支持同步支付，请选择其他支付方式。 | 诊断 |
| 400 | InvalidOperation.EniOperationConflict | The previous ENI operation is still in progress. Please try again later. | 当前操作冲突，请稍等一段时间后重试 | 诊断 |
| 403 | InvalidEncrypted.NotMatchDiskDefaultEncryption | Enabling disk default encryption prevents the creation of non-encrypted disks. | 启用云盘账号默认加密后，无法创建非加密磁盘。 | 诊断 |
| 403 | InvalidEncrypted.NotMatchSnapshot | The specified parameter Encrypted must be set to true when creating disks with encrypted snapshots. | 当使用加密快照创建磁盘时，指定的参数Encrypted必须设置为true。 | 诊断 |
| 400 | InvalidImage.WindowsUnsupported | The specified InstanceType does not support the specified Windows image. | 指定的实例规格不支持 Windows 镜像 | 诊断 |
| 400 | InvalidVSwitch.IllegalStatus | The operation is not allowed in the current VSwitch state. Expecting state includes "Created", but current state is "%s". | 当前交换机状态不支持该操作。 | 诊断 |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | CidrBlock[%s]非法 | 诊断 |
| 400 | InvalidInstanceType.ValueNotSupported | Both instanceType and bandwidth are null or same as current values. | 输入的实例规格和带宽值均为空或均与当前值相同。 | 诊断 |
| 400 | InvalidAction | The specified operatorType is not supported. | 指定的操作类型不支持。 | 诊断 |
| 404 | InvalidSecurityGroupSnapshotId.NotFound | The specified security group snapshot id is not found. | 指定的安全组快照id不存在 | 诊断 |
| 403 | InvalidOperation.SnapshotPolicyAssociatedSecurityGroup | Snapshot policy associated with security group can not be deleted. | 当安全组策略关联了安全组时，不可以删除此策略。 | 诊断 |
| 403 | InvalidOperation.ParseSnapshotError | Failed to parse snapshot content from oss. | 从OSS中解析安全组快照时发生错误，请检查安全组快照文件是否正常。 | 诊断 |
| 403 | InvalidOperation.DuplicatedSnapshotPolicyType | The specified security group has duplicated snapshot policy type. | 指定的安全组已经关联了同样类型的策略，无需再次关联。 | 诊断 |
| 403 | InvalidOperation.GroupSnapshotPolicyRelationExist | The specified security group has associated with security group snapshot policy. | 指定的安全组已经关联了安全组快照策略。 | 诊断 |
| 403 | InvalidOperation.ClassicGroupNotSupportSgSnapshot | Classic security group does not support security group snapshot. | 经典安全组不支持安全组快照功能。 | 诊断 |
| 404 | InvalidSecurityGroupSnapshotPolicyId.NotFound | The specified security group snapshot policy id is not found. | 指定的安全组快照策略id不存在。 | 诊断 |
| 400 | InvalidImage.ChargeTypeMismatch | The specified image's charge type is incompatible with the instance's charge type. Please change either the image or the instance's charge type to resolve this issue. | 指定镜像的付费类型与实例的付费类型不兼容。请更改镜像或实例的付费类型以解决此问题。 | 诊断 |
| 400 | InvalidOperation.ImageOwnerIdUnsupported | The parameter "ImageOwnerId" is not supported in this context, it is only valid when querying shared images or community images. | 此处不支持ImageOwnerId参数，该参数仅在查询共享镜像或社区镜像时有效。 | 诊断 |
| 403 | InvalidParameter.KMSKeyId.CMKNotEnabled | The CMK (Customer Master Key) must be in an active state. | 用户主密钥（CMK）需要处于活动状态。 | 诊断 |
| 403 | InvalidParameter.KMSKeyId.CMKUnauthorized | The CMK(Customer Master Key) lacks authorization to add tags to the ECS service. | 用户主密钥（CMK）未授权ECS服务添加标签权限。 | 诊断 |
| 403 | InvalidParams | The parameters statusKey or statusValue are not valid. | 用于设置用户级别默认属性的statusKey 或 statusValue 的值不符合要求 | 诊断 |
| 404 | InvalidReportId | Feedback record does not exist. | 反馈记录不存在 | 诊断 |
| 403 | InvalidParameter.InstanceId | The specified instance is not found. | 指定的实例未找到。 | 诊断 |
| 404 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | 地域信息错误 | 诊断 |
| 404 | InvalidReportId | Feedback record error. | 反馈记录错误 | 诊断 |
| 403 | InvalidOperation.DeleteDefaultVersion | Deleting the default version of the launch template is not permitted. | 删除启动模板的默认版本是不允许的。 | 诊断 |
| 403 | InvalidOperation.UserNotSupportNetworkEncryption | User not support network encryption. | 用户不支持指定网络流量加密参数。 | 诊断 |
| 403 | InvalidOperation.DeleteDefaultVersion | Delete default version from template is not allowed. | 不允许删除启动模板的默认版本。 | 诊断 |
| 403 | QuotaExceed.Tags | The Tags parameter's quota is exceed , Valid : 20. | 标签参数的配额已超过，最大值为：20。 | 诊断 |
| 400 | InvalidParam.Entry | The specified parameter Entry is not valid. | 指定的参数Entry不合法。 | 诊断 |
| 400 | InvalidParams.CreateEniParams | The specified parameter CreateEniParams is invalid. | 指定的参数 CreateEniParams 无效。 | 诊断 |
| 403 | LaunchTemplateVersionLimitExceed | The maximum number of template's versions is exceeded. | 已超过启动模板版本的最大数量。 | 诊断 |
| 403 | InvalidOperation.InstanceTypeNotSupportNetworkEncryption | The specified instance type does not support network encryption. | 指定的实例规格不支持vpc流量加密 | 诊断 |
| 403 | InvalidOperation.UserNotSupportNetworkEncryption | The specified user does not support network encryption. | 用户不支持指定网络流量加密参数 | 诊断 |
| 400 | InvalidRegion.NotExist | The specified region does not exists. | 指定的区域不存在。 | 诊断 |
| 403 | LaunchTemplateLimitExceed | The maximum number of templates is exceeded. | 已超过启动模板的最大数量。 | 诊断 |
| 400 | InvalidUserData.Base64FormatInvalid | The specified parameter UserData must be base64 encoded. | 指定的参数 UserData 必须是 base64 编码的。 | 诊断 |
| 400 | InvalidParam.ProtocolNotSupportPortRangeList | The specified protocol does not support the port range list. | 指定的协议不支持端口列表。 | 诊断 |
| 400 | InvalidManagedPrivateSpaceId.NotFound | The specified ManagedPrivateSpaceId is not found. | 指定的 ManagedPrivateSpaceId 不存在 | 诊断 |
| 400 | OperationDenied.InvalidNetworkType | The specified network type is not available in the specified region. | 指定的网络类型在指定的地域不可用。 | 诊断 |
| 400 | InvalidParam.Amount | The number of ECS must be 1 when assign ipv6 according to the IP address. | 创建 ipv6 实例一次只支持创建1台 | 诊断 |
| 403 | InvalidParameter.EniType | The EniType parameter of NetworkInterface should be Primary or Secondary. | 弹性网卡的类型应当为 Primary 或 Secondary | 诊断 |
| 403 | InvalidParameter.QueuePairNumberMustEmpty | The input parameter QueuePairNumber must be empty when traffic mode is Standard. | 当Traffic Mode 为 Standard 类型时，指定的参数 QueuePairNumber 必须为空 | 诊断 |
| 400 | InvalidSecurityGroupId.MultiGroupIdNetworkTypeConflict | The specified classic networkType does not support multiple security group. | 指定的经典网络类型不支持多安全组 | 诊断 |
| 403 | Forbidden.OnlySupportEnterpriseGroup | The specified security group type should be enterprise when the specified instance type is shared. | 指定的安全组类型应当为企业级当指定的实例规格为共享型时。 | 诊断 |
| 400 | InvalidInstanceType.AttachedNumberExceeded | The number of disks supported by the specified instance type exceeds the maximum limit. | 指定的实例规格支持挂载的磁盘数量超出最大限制 | 诊断 |
| 400 | BandwidthTemporaryUpgrade.IspNotSupport | The specified ISP parameter is not supported for temporary bandwidth upgrade. | 带宽临时升级不支持指定 ISP 参数 | 诊断 |
| 400 | InstanceTypeNotSupported.TooManyDisksAttached | It is not allowed to mount so many disks on the target instance type. | 不允许在目标实例类型上挂载这么多磁盘。 | 诊断 |
| 403 | InstanceType.Offline | The specified InstanceType has been offline. | 指定的实例规格已下线 | 诊断 |
| 400 | InvalidInstanceChargeType.ValueNotSupported | The charge type of specified Instance is not supported. | 指定实例的付费类型不支持。 | 诊断 |
| 403 | IncorrectInstanceStatus | The special instance status not support this operate. | 当前的实例状态不支持此操作 | 诊断 |
| 403 | InvalidImageCategory.NotSupported | The specified image category is not supported. | 指定镜像的镜像所属类型（ImageCategory或更通用称为ImageOwnerAlias）不支持此操作。 | 诊断 |
| 403 | MissingParameter | These parameters %s cannot be both empty. | 多个参数中必须至少填写其中一个（不能全为空）。 | 诊断 |
| 400 | MissingParameter | The specified parameter "AutoProvisioningGroupId" should not be null. | 弹性供应组Id（AutoProvisioningGroupId）必须填写。 | 诊断 |
| 400 | InvalidAutoReleaseTime.Malformed | The specified parameter AutoReleaseTime is not valid. | 指定的自动释放时间AutoReleaseTime无效。 | 诊断 |
| 400 | InvalidAutoProvisioningGroupName.Malformed | The specified parameter "AutoProvisioningGroupName" is not valid. | 指定的弹性供应组名称AutoProvisioningGroupName无效。 | 诊断 |
| 403 | InvalidInstance.NoDisk | There is no disk mounted on the instance. | 实例上没有挂载磁盘。 | 诊断 |
| 404 | InvalidFilterKey.NotFound | Invalid filter.%s. | 指定的Filter.N.Key无效。 | 诊断 |
| 400 | InvalidAutoReleaseTime.Malformed | The specified paramter autoReleaseTime is not valid. | 自动释放时间参数AutoReleaseTime不合法 | 诊断 |
| 403 | InvalidOperation.UnpaidOrder | The specified instance has unpaid orders and does not support the current operation. | 指定的实例有未完成支付的订单，不支持当前操作。 | 诊断 |
| 403 | InvalidOperation.PackageTypeUnsupported | Not support to renew this type of resource package. | 该类型资源包不支持续费。 | 诊断 |
| 400 | Invalid.InstanceId | Modify DedicatedHost Instance's attachment attributes is not supported. | DedicatedHost类型实例不支持修改私有池相关属性。 | 诊断 |
| 400 | Invalid.InstanceId | Modify Classic Network Instance's attachment attributes is not supported. | 不支持修改经典网络实例的私有池相关属性。 | 诊断 |
| 400 | Invalid.InstanceId | Modify Spot Instance's attachment attributes is not supported. | 不支持修改经抢占式实例的私有池相关属性。 | 诊断 |
| 403 | Abs.InvalidInstanceIds.MalFormed | The specified InstanceIds is not valid. | 指定的实例ID无效。 | 诊断 |
| 403 | InvalidOperation.Ipv6NotSupport | Current instance type does not support IPv6. | 当前实例规格不支持IPv6。 | 诊断 |
| 403 | InvalidOperation.Ipv6CountExceeded | The number of IPv6 addresses on the ENI attached to the current ECS exceeds the limit of the instance type. | 当前ECS实例绑定的弹性网卡上的Ipv6地址数量超过了目标规格的限制。 | 诊断 |
| 403 | InvalidOperation.Ipv4CountExceeded | The number of IPv4 addresses on the ENI attached to current ECS exceeds the limit of the instance type. | 当前ECS绑定的弹性网卡上的Ipv4地址数量超过了目标规格的限制。 | 诊断 |
| 403 | InvalidOperation.ExceedInstanceTypeQueueNumber | The total ENI queue number of current instance exceeds the limit of the instance type. | 当前ECS实例绑定的弹性网卡队列数超过了目标规格限制的网卡队列数。 | 诊断 |
| 403 | InvalidOperation.NetworkInterfaceCountExceeded | The maximum number of NetworkInterface in a enterprise level security group is exceeded. | 指定的企业级安全组中的网卡数量超限。 | 诊断 |
| 400 | InvalidPayAsYouGoAllocationStrategy.ValueNotSupported | The specified parameter "PayAsYouGoAllocationStrategy" is not valid. | 指定的按量付费实例的策略参数PayAsYouGoAllocationStrategy无效。 | 诊断 |
| 400 |