调用ModifySagRouteProtocolBgp修改智能接入网关设备动态路由协议BGP的配置。
调试
您可以在OpenAPI Explorer中直接运行该接口,免去您计算签名的困扰。运行成功后,OpenAPI Explorer可以自动生成SDK代码示例。
请求参数
名称 | 类型 | 是否必选 | 示例值 | 描述 |
---|---|---|---|---|
Action | String | 否 | ModifySagRouteProtocolBgp |
要执行的操作。 取值:ModifySagRouteProtocolBgp。 |
HoldTime | Integer | 是 | 9 |
保持时间。 取值范围:3~65535。 说明 在智能接入网关设备和对端设备建立对等体关系时,两端设备要协商Hold Time并保持一致,如果在Hold Time内未收到对端发来的KeepAlive或Update消息,则认为BGP连接中断。
|
KeepAlive | Integer | 是 | 3 |
存活时间间隔。 取值范围:0~65535。 |
LocalAs | Integer | 是 | 12345 |
智能接入网关设备所属自治系统编号。 取值范围:1~2147483647。 |
RegionId | String | 是 | cn-shanghai |
智能接入网关实例地域ID。 |
RouterId | String | 是 | 172.XX.XX.1 |
BGP路由器ID。 取值格式为IPv4地址格式。 |
SmartAGId | String | 是 | sag-whfn**** |
智能接入网关实例ID。 |
SmartAGSn | String | 是 | sag32a30**** |
绑定的智能接入网关设备序列号。 |
返回数据
名称 | 类型 | 示例值 | 描述 |
---|---|---|---|
RequestId | String | 48868976-45A2-4E87-B3AA-25089B8B7E49 |
请求ID。 |
示例
请求示例
http(s)://smartag.cn-shanghai.aliyuncs.com/?Action=ModifySagRouteProtocolBgp
&HoldTime=9
&KeepAlive=3
&LocalAs=12345
&RegionId=cn-shanghai
&RouterId=172.XX.XX.1
&SmartAGId=sag-whfn****
&SmartAGSn=sag32a30****
&<公共请求参数>
正常返回示例
XML
格式
<ModifySagRouteProtocolBgpResponse>
<RequestId>48868976-45A2-4E87-B3AA-25089B8B7E49</RequestId>
</ModifySagRouteProtocolBgpResponse>
JSON
格式
{
"RequestId": "48868976-45A2-4E87-B3AA-25089B8B7E49"
}
错误码
HttpCode | 错误码 | 错误信息 | 描述 |
---|---|---|---|
400 | SAG.InstanceNoFound | The specified SAG instance does not exist. | 智能网关实例不存在。 |
400 | SAG.SoftwareNotSupport | The specified SAG software edition instance does not support ACL. | 智能接入网关软件版实例不支持ACL。 |
500 | SmartAccessGatewayInArrears | The specified Smart Access Gateway has expired. | 该智能接入网关已经到期停服,请续费。 |
500 | SmartAccessGatewayNotActivated | The specified Smart Access Gateway has not been activated. | 该智能接入网关尚未激活,请先激活该实例。 |
403 | SmartAccessGatewayNotOnline | The specified smart access gateway is not online. | 该智能接入网关当前不是在线状态,无法完成操作。 |
500 | SmartAccessGatewayOffline | The request cannot be completed. The Smart Access Gateway is offline. | 智能接入网关离线,请求无法完成。 |
400 | InstanceNotExit | The specified instance does not exist. | 指定的实例不存在 |
400 | ConfigUnsynchronized | The network configuration is not synchronized. | 网络配置未同步 |
403 | FeatureNotSupport | The current edition of the smart access gateway does not support this feature. | 智能接入网关当前版本不支持该功能特性 |
403 | FeatureNotSupportForActiveSmartAG | The current edition of the active smart access gateway does not support this feature. | 主智能接入网关的当前版本不支持该功能特性 |
403 | FeatureNotSupportForStandBySmartAG | The current edition of the standby smart access gateway does not support this feature. | 备智能接入网关的当前版本不支持该功能特性 |
访问错误中心查看更多错误码。
在文档使用中是否遇到以下问题
更多建议
匿名提交