备案控制台
文档
产品文档
输入文档关键字查找
首页 物联网平台 开发参考 设备端开发指南 C Link SDK 文件上传 示例三：MQTT文件上传至用户OSS空间

示例三：MQTT文件上传至用户OSS空间

更新时间：
一键部署
产品详情
相关技术圈
我的收藏

物联网平台提供的文件上传功能，是将您上传的文件存储在物联网平台的OSS空间中，除此之外，还支持您通过MQTT方式将文件上传至您自己的OSS空间中。

说明

文件上传到您的OSS空间后，您只能在OSS空间对文件进行管理和操作，无法在物联网平台的设备详情 > 文件管理页面操作文件。

前提条件

  • 在物联网平台对设备授权OSS的操作权限。具体操作，请参见：上传文件配置。

  • 在文件上传页面获取extra_params参数的配置信息。具体操作，请参见：文件上传。

    说明

    extra_params是将文件上传至用户OSS空间的关键参数。如果需要上传文件到用户的OSS空间，则配置extra_params。如果不需要将文件上传至用户的OSS空间，则extra_params配置为NULL。

操作步骤

  1. 初始化MQTT模块。

  2. 初始化MQTT 文件上传模块，在mqtt_upload_user_oss_demo.c文件中设置需要上传文件的信息。

    说明

    extra_params仅支持JSON格式，具体说明，请参见：文件上传。

    extra_params格式示例：

    {
    "ossOwnerType":"device-user",
    "serviceId":"1234567890",
    "fileTag":{
        "tagKey1":"tagValue1",
        "tagKey2":"tagValue2"
    }
}

    upload组件参数配置代码示例：

        uint32_t rsp_timeout = 10000;
    aiot_mqtt_upload_setopt(up_handle, AIOT_MQTT_UPLOADOPT_RSP_TIMEOUT_MS, &rsp_timeout);
    uint32_t rety_count = 5;
    aiot_mqtt_upload_setopt(up_handle, AIOT_MQTT_UPLOADOPT_RETRY_COUNT, &rety_count);
    uint32_t block_size = 256;
    aiot_mqtt_upload_setopt(up_handle, AIOT_MQTT_UPLOADOPT_DEFAULT_BLOCK_SIZE, &block_size);

    
    /* 配置MQTT需要上传的文件信息，未知文件大小，文件长度设置为-1，回调函数read_data_handler设置为NULL，
       使用aiot_mqtt_upload_send_data接口进行数据发送 */
    uint32_t file_size = -1;
    
    /* 如果需要上传文件到用户的OSS空间，则配置extra_params参数
       如果不需要将文件上传到用户的OSS空间，extra_params配置为NULL，
       可以在文件管理页面查看具体文件。
       [extra_params参数配置必须使用JSON格式]
     */
    char *extra_params = "{\"ossOwnerType\":\"device-user\",\"serviceId\":\"1234567890\",\"fileTag\":{\"tagKey1\":\"tagValue1\",\"tagKey2\":\"tagValue2\"}}";
    
    aiot_mqtt_upload_file_opt_t file_option = {
        .file_name = MQTT_UPLOAD_SINGLE_FILE_NAME,
        .file_size = file_size,
        .mode = AIOT_MQTT_UPLOAD_FILE_MODE_OVERWRITE,
        .digest = NULL,
        .read_data_handler = NULL,
        .userdata = NULL,
        .extra_params = extra_params
    };

    res = aiot_mqtt_upload_setopt(up_handle, AIOT_MQTT_UPLOADOPT_FILE_OPTION, &file_option);

  3. 请求文件上传。

    请求文件上传的aiot_mqtt_upload_open_stream是同步接口，您需要等待应答信息后才能开始进行上传。

    aiot_mqtt_upload_recv_t recv_packet = {0};
    res = aiot_mqtt_upload_open_stream(up_handle, MQTT_UPLOAD_SINGLE_FILE_NAME, &recv_packet);
    if (res < STATE_SUCCESS) {
        goto exit;
    }

  4. 上传分片文件。

    您主动调用aiot_mqtt_upload_send_data接口，进行分片数据的上传。

    说明

    is_commplete是通知物联网平台是否为文件上传的最后一包数据，所以在上传的过程中该参数需要设置为0，上传最后一包数据时is_commplete需设置为1。

    5. if ((upload_file_len + data_len) < MQTT_UPLOAD_SINGLE_FILE_SIZE) {
    /* 发送分包数据 */
    data_len = block_size;
    is_commplete = 0;
} else {
    /* 发送最后一包文件内容 */
    data_len = MQTT_UPLOAD_SINGLE_FILE_SIZE - upload_file_len;
    is_commplete = 1;
}

res = aiot_mqtt_upload_send_data(up_handle, MQTT_UPLOAD_SINGLE_FILE_NAME,            &g_upload_single_file_buf[upload_file_len], data_len, is_commplete);
if (res == STATE_SUCCESS) {
    upload_file_len += data_len;
    printf("upload_file_len:%d\r\n", upload_file_len);
}

  5. 结束所有上传文件后，销毁会话句柄释放资源。

    /* 等待所有文件上传完成后，才可销毁MQTT UPload 会话实例 */
aiot_mqtt_upload_deinit(&up_handle);

日志说明

  1. MQTT连接成功。

    [1645604145.783][LK-0313] MQTT user calls aiot_mqtt_connect api, connect
[1645604145.783][LK-032A] mqtt host: a1******Dih.iot-as-mqtt.cn-shanghai.aliyuncs.com
[1645604145.783][LK-0317] user name: mqttupload0002&a1******Dih
[1645604145.783][LK-0318] password: 194163B399BA079B9BB6*******************F2D275A9D9ADFBA29
success to establish tcp, fd=5
local port: 51712
[1645604145.862][LK-1000] establish mbedtls connection with server(host='a1******Dih.iot-as-mqtt.cn-shanghai.aliyuncs.com', port=[443])
[1645604145.889][LK-1000] success to establish mbedtls connection, (cost 45260 bytes in total, max used 47996 bytes)
[1645604146.138][LK-0313] MQTT connect success in 355 ms
AIOT_MQTTEVT_CONNECT

  2. MQTT 文件上传创建会话并进行消息订阅。

    [1645604146.138][LK-2113] aiot_mqtt_upload_init init
[1645604146.138][LK-0309] sub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/init_reply
[1645604146.138][LK-0309] sub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/send_reply
[1645604146.138][LK-0309] sub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/cancel_reply

  3. 请求上传文档到用户的OSS空间。

    [1645671153.383][LK-0309] pub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/init

[LK-030A] > 7B 22 69 64 22 3A 22 31  22 2C 22 70 61 72 61 6D | {"id":"1","param
[LK-030A] > 73 22 3A 7B 22 66 69 6C  65 4E 61 6D 65 22 3A 22 | s":{"fileName":"
[LK-030A] > 6D 71 74 74 75 70 6C 6F  61 64 66 69 6C 65 2E 74 | mqttuploadfile.t
[LK-030A] > 78 74 22 2C 22 66 69 6C  65 53 69 7A 65 22 3A 2D | xt","fileSize":-
[LK-030A] > 31 2C 22 63 6F 6E 66 6C  69 63 74 53 74 72 61 74 | 1,"conflictStart
[LK-030A] > 65 67 79 22 3A 22 6F 76  65 72 77 72 69 74 65 22 | egy":"overwrite"
[LK-030A] > 2C 22 69 6E 69 74 55 69  64 22 3A 22 31 36 34 35 | ,"initUid":"1645
[LK-030A] > 36 ** ** *1 35 33 33 38  33 39 22 2C 22 65 78 74 | 671*****39","ext
[LK-030A] > 72 61 50 61 72 61 6D 73  22 3A 7B 22 6F 73 73 4F | raParams":{"ossO
[LK-030A] > 77 6E 65 72 54 79 70 65  22 3A 22 64 65 76 69 63 | wnerType":"devic
[LK-030A] > 65 2D 75 73 65 72 22 2C  22 73 65 72 76 69 63 65 | e-user","service
[LK-030A] > 49 64 22 3A 22 31 32 33  34 35 36 37 38 39 30 22 | Id":"1234567890"
[LK-030A] > 2C 22 66 69 6C 65 74  61 67 22 3A 7B 22 74 61 67 | ,"fileTag":{"tag
[LK-030A] > 4B 65 79 31 22 3A 22  74 61 67 56 61 6C 75 65 31 | Key1":"tagValue1
[LK-030A] > 22 2C 22 74 61 67 4B  65 79 32 22 3A 22 74 61 67 | ","tagKey2":"tag
[LK-030A] > 56 61 6C 75 65 32 22  7D 7D 7D 7D                | Value2"}

  4. 收到物联网平台应答消息。

    [1645604146.391][LK-0309] pub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/init_reply

[LK-030A] < 7B 22 63 6F 64 65 22 3A  32 30 30 2C 22 64 61 74 | {"code":200,"dat
[LK-030A] < 61 22 3A 7B 22 66 69 6C  65 4E 61 6D 65 22 3A 22 | a":{"fileName":"
[LK-030A] < 6D 71 74 74 75 70 6C 6F  61 64 66 69 6C 65 2E 74 | mqttuploadfile.t
[LK-030A] < 78 74 22 2C 22 75 70 6C  6F 61 64 49 64 22 3A 22 | xt","uploadId":"
[LK-030A] < 66 66 35 4B 49 38 ** **  ** ** ** 62 63 51 69 52 | ff5KI8*****bcQiR
[LK-030A] < 75 43 35 36 30 31 30 32  30 30 22 2C 22 6F 66 66 | uC56010200","off
[LK-030A] < 73 65 74 22 3A 30 2C 22  66 69 6C 65 53 69 7A 65 | set":0,"fileSize
[LK-030A] < 22 3A 2D 31 2C 22 63 6F  6E 66 6C 69 63 74 53 74 | ":-1,"conflictSt
[LK-030A] < 72 61 74 65 67 79 22 3A  22 6F 76 65 72 77 72 69 | rategy":"overwri
[LK-030A] < 74 65 22 7D 2C 22 69 64  22 3A 22 31 22 2C 22 6D | te"},"id":"1","m
[LK-030A] < 65 73 73 61 67 65 22 3A  22 73 75 63 63 65 73 73 | essage":"success
[LK-030A] < 22 7D                                            | "}

  5. 分送分片文件。

    循环调用aiot_mqtt_upload_send_data函数进行数据上传，该函数是同步发送接口，等待应答STATE_SUCCESS后才能发起上传新的一包数据。

    [1645604146.391][LK-210B] Recv file name:mqttuploadfile.txt
[1645604146.401][LK-0309] pub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/send

[LK-030A] > 00 67 7B 22 69 64 22 3A  22 32 22 2C 22 70 61 72 | .g{"id":"2","par
[LK-030A] > 61 6D 73 22 3A 7B 22 75  70 6C 6F 61 64 49 64 22 | ams":{"uploadId"
[LK-030A] > 3A 22 66 66 35 4B 49 **  ** ** ** ** ** ** 63 51 | :"ff5KI********Q
[LK-030A] > 69 52 75 43 35 36 30 31  30 32 30 30 22 2C 22 6F | iRuC56010200","o
[LK-030A] > 66 66 73 65 74 22 3A 30  2C 22 62 53 69 7A 65 22 | ffset":0,"bSize"
[LK-030A] > 3A 32 35 36 2C 22 69 73  43 6F 6D 70 6C 65 74 65 | :256,"isComplete
[LK-030A] > 22 3A 66 61 6C 73 65 7D  7D 00 00 00 00 00 00 00 | ":false}}.......
[LK-030A] > 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
[LK-030A] > 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
[LK-030A] > 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
[LK-030A] > 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................

  6. 结束文件上传。

    上传最后一包数据时，您需要将isComplete设置为1，通知物联网平台这是最后一包上传数据，完成文件上传。

    [LK-030A] < 7B 22 63 6F 64 65 22 3A  32 30 30 2C 22 64 61 74 | {"code":200,"dat
[LK-030A] < 61 22 3A 7B 22 66 69 63  4D 6F 64 65 22 3A 22 63 | a":{"ficMode":"c
[LK-030A] < 72 63 36 34 22 2C 22 75  70 6C 6F 61 64 49 64 22 | rc64","uploadId"
[LK-030A] < 3A 22 66 66 35 4B 49 **  ** ** ** ** ** ** ** 51 | :"ff5KI*******Q
[LK-030A] < 69 52 75 43 35 36 30 31  30 32 30 30 22 2C 22 6F | iRuC56010200","o
[LK-030A] < 66 66 73 65 74 22 3A 37  36 38 2C 22 63 6F 6D 70 | ffset":768,"comp
[LK-030A] < 6C 65 74 65 22 3A 74 72  75 65 2C 22 66 69 63 56 | lete":true,"ficV
[LK-030A] < 61 6C 75 65 53 65 72 76  65 72 22 3A 22 63 33 37 | alueServer":"c37
[LK-030A] < 38 36 33 39 37 32 30 36  39 32 37 30 63 22 2C 22 | 863********270c","
[LK-030A] < 62 53 69 7A 65 22 3A 32  35 36 7D 2C 22 69 64 22 | bSize":256},"id"
[LK-030A] < 3A 22 35 22 2C 22 6D 65  73 73 61 67 65 22 3A 22 | :"5","message":"
[LK-030A] < 73 75 63 63 65 73 73 22  7D                      | success"}

[1645604147.904][LK-2125] Complete upload total size:1024
upload_file_len:1024
[1645604147.908][LK-2100] Finish upload,Deleted upload task.
MQTT Upload file(mqttuploadfile.txt) uploadid(ff5KI*********RuC56010200) success.

  7. 上传完成后销毁句柄释放资源。

    [1645604152.908][LK-210F] aiot_mqtt_upload_deinit
[1645604152.908][LK-0309] unsub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/init_reply
[1645604152.908][LK-0309] unsub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/send_reply
[1645604152.908][LK-0309] unsub: /sys/a1******Dih/mqttupload****/thing/file/upload/mqtt/cancel_reply
[1645604152.908][LK-1000] adapter_network_deinit

文档推荐
  • 本页导读 （1）
文档反馈