Monitor an IDC
CloudBox is delivered in standardized cabinets equipped with an environmental monitoring system that tracks temperature, humidity, and access control. You can view the monitoring data for your IDC in the console.
Procedure
-
Go to the Cloud Boxes tab.
-
Log on to the ECS console.
-
In the left-side navigation pane, choose .
-
In the top navigation bar, select a region.
-
Click the Cloud Boxes tab.
-
-
Find the target CloudBox and click its ID to go to the details page.
-
Click the Monitoring tab.
-
Set the Time Precision (1 hour or 1 minute) and the Time Range, and then select a cabinet to view its monitoring data.
Note-
Hover over a point on a line chart to view detailed data.
-
The O&M Exception Events tab shows exception events, such as alarms for abnormal temperature or humidity in the IDC.
The monitoring data includes the following metrics:
Metric
Description
Cabinet humidity change line chart
Shows humidity changes within the cabinet, measured in percent relative humidity (% RH).
An alarm is triggered if the humidity level falls outside the normal range of 30% to 80% RH.
Cabinet temperature change line chart
Shows temperature changes within the cabinet, measured in degrees Celsius (°C).
An alarm is triggered if the temperature falls outside the normal range of 5°C to 30°C.
Cabinet door status change chart
Shows whether the cabinet door is open or closed.
-