Validate ad delivery for ad slots

The validation process has three main steps:

1. Create ad slots

2. Create and publish a campaign

3. Check ad delivery on the mobile client

The following sections describe each step in detail.

Create a booth

1. Log on to the mPaaS console and navigate to the target mPaaS CDP application.

2. For more information, see Create ad slots. Create a launch screen ad slot and a preset client ad slot.

   The ID for the launch screen ad slot is set to STARTPAGE. The ID for the preset client ad slot must be the same as the one configured in the client.

3. Configure the ad slot information and then submit it.

   Note

   If you set the width and height for an ad slot in both the client and the console, the settings in the client take precedence.

Create and publish a campaign

1. For more information, see Create a campaign. Create a proactive marketing campaign. When you configure the marketing actions, add the two ad slots that you created. Then, add the corresponding materials to the ad slots.

2. After you configure the campaign, click Submit.

3. On the campaign management page, click Publish on the campaign card.

Check ad delivery on the mobile client

1. Install the mPaaS CDP application on a mobile device for testing.

2. After the installation is complete, open the application and navigate to the home page.

3. The home page in this tutorial has two buttons. Click these buttons to navigate to the corresponding launch screen and app page.

   Normally, the application displays a launch screen ad on the launch screen and a banner ad on the specified app page. If the ads are not displayed, see FAQ to troubleshoot the issue.