TG8000H

Parameter

Metrics

Core

• Armv8-M STAR-MC1 MCU, up to 480 MHz:

  • Double-precision Floating-Point Unit (FPU)

  • 16 KB ITCM + 16 KB DTCM

  • Built-in TrustZone

  • Supports DSP instructions with single instruction multiple data (SIMD)

  • 3.84 CoreMark/MHz

• Sleep mode: 43 μA

• Deep sleep mode: 16 μA

• Shutdown mode: 2.5 μA

• UART flash download

• Serial Wire Debug (SWD) interface

Memory

• 8 MB SiP flash

• 8 MB SiP PSRAM

• 640 KB shared SRAM

• 64 KB ROM

• eFuse

Wi-Fi

• Compliant with IEEE 802.11b/g/n/ax 1x1

• Supports 20 MHz and 40 MHz bandwidth in the 2.4 GHz band

• Supports downlink multi-user multiple-input and multiple-output (DL MU-MIMO)

• Supports Orthogonal Frequency Division Multiple Access (OFDMA)

• Supports Target Wake Time (TWT)

• TX and RX Low-Density Parity Check (LDPC) support for extended range

• WPA/WPA2/WPA3-Personal support for enhanced security

• Operating modes: STA and SoftAP

• SoftAP + STA coexistence

• Integrated Bluetooth/Wi-Fi coexistence (PTA)

• Transmit power up to +20 dBm

• Receive sensitivity -98 dBm

Bluetooth Low Energy

• Bluetooth Low Energy 5.4 (Bluetooth LE)

• Supports Bluetooth LE 1 Mbps, 2 Mbps, and long range (125 kbps and 500 kbps)

• Supported Bluetooth LE features: LE Audio, Angle of Arrival (AoA) and Angle of Departure (AoD) direction finding, 2 Mbps, advertising extensions, and long range

• Supports antenna arrays with up to 16 antennas for precise positioning

Clock management

• External oscillators: 26 MHz crystal oscillator (XTALH), 32 kHz (32.768 kHz) crystal oscillator (XTALL)

• Internal oscillators: 26-360 MHz digitally-controlled oscillator (DCO), 32 kHz ring oscillator (ROSC)

• 320/480 MHz PLL (DPLL)

• Audio PLL (APLL)

Power management

• 2.0 V to 4.35 V VBAT power supply

• On-chip Power-on Reset (POR) and Brown-out Detection (BOD)

• Built-in DC-DC buck transformer and LDO regulators

• Low power consumption:

  • Active mode RX: 17.5 mA

  • Sleep mode: 43 μA

  • Deep sleep mode: 16 μA

  • Shutdown mode: 2.5 μA

Peripherals

• 56 GPIO

• 2 SPI

• 2 QSPI

• 3 UARTs, with 1 supporting hardware flow control and flash download

• 1 smart card controller

• 1 SDIO

• 2 I2C

• 1 High-Speed USB 2.0 (HS)

• 1 CAN controller, supports CAN FD

• 1 LIN controller

• 2 General-Purpose DMA (GDMA) controllers, 8 channels each

• 1 DMA2D controller

• 1 rotation module

• 2 scaling modules

• 1 display controller, supports RGB and 8080 interfaces

• 1 segment LCD controller, supports up to 8 × 28 segments

• 1 JPEG hardware encoder

• 1 JPEG hardware decoder

• 1 8-bit CIS DVP interface

• 1 720p H.264 video encoder

• 1 Ethernet MAC interface

• 12 32-bit PWM channels

• 3 I2S

• 1 4-band digital hardware equalizer

• 2 audio ADCs

• 1 audio DAC

• 1 DMIC

• 1 SBC accelerator

• 12-bit AUX ADC, up to 11 channels

• 6 32-bit general-purpose timers

• 2 watchdog timers

• 1 Real-Time Clock (RTC)

• 1 infrared interface

• 1 temperature sensor

• 1 touch sensor, supports up to 16 touch-sensing I/Os

Package

• QFN88 package, 9 mm × 9 mm

• Operating temperature range: -40 °C to +85 °C