The user ID of the AIPL Model can be pushed to the data bank on a daily basis.
The number of pushed AIPL model users must be greater than 5000 and less than 0.2 billion. Otherwise, the push fails.
Supports pushing multiple AIPL models to the same data bank brand. The same organization supports pushing AIPL models to the same brand up to 10 times in a day. You will be prompted when you set push again after exceeding the limit.
For AIPL models with the same channel source, you can push only one AIPL model within a day. If the channel source is the same for users of the, I, P, or L types of different AIPL models, you can push only one AIPL model. For more information about how to configure the channel source, see Create An AIPL Model. If you do not configure the channel source, Omni-channel is used by default.
Procedure
Choose Workspace> User Insight > Marketing Model > AIPL Model. In the AIPL Model section, choose
/> Push. 
In the Push to drop-down list, select Associated Application, Data Bank, and Data Bank Brand.
If the AIPL model has a periodic push configuration, the Remove Configuration button appears in the lower-right corner. You can click to clear the original configuration. The periodic push of the original configuration is no longer performed.
Turn on Enable Push and set the Push Time, Start Time, and End Time parameters.
Push encryption method: To ensure information security, the system encrypts the ID field before push. Data banks receive the encrypted ID field. The MD5 and SHA256 encryption methods are supported.
If you select MD5, ID fields that have been encrypted by SHA256 before being pushed into the system are not supported. Only ID fields that have been encrypted by MD5, AES, or not encrypted before being pushed into the system are supported.
If you select SHA256, ID fields that have been encrypted by MD5 before being pushed into the system are not supported. Only ID fields that have been encrypted by SHA256, AES, or not encrypted before being pushed into the system are supported.
The encryption method of the ID field is specified when you configure the table structure. For more information, see Table Structure Configuration Documentation.
Pushed Field: Select the ID type from the drop-down list.
NoteYou can push the mobile phone number, email address, MAC address, IMEI, IDFA, IMSI, OAID, Taobao ID, and Taobao nickname.
Click Save, read the announcement, select I have read and agree to the agreement, and then click OK. The system will push at the specified time every day.
NoteIf a data bank push parallelism has been set in the management center, AIPL models that exceed the limit need to queue up for push. For more information, see Workspace System Configuration.
Click Push History to view the push results.
As shown in the following figure, the audience size in the list is the total number of pushed IDs.
If the data is pushed, click Enter Data Bank to use the data.
