Agent console

Updated at:

This topic describes the agent console of Cloud Call Center.

Introduction

After an administrator imports Alibaba Cloud accounts and RAM users into a Cloud Call Center instance, assigns them roles, and configures their skill groups, agents can use the system to answer calls, make calls, and perform other softphone operations. The agent console provides features such as going online or offline, taking a break, ending a break, answering inbound calls, making outbound calls, post-processing, holding a call, retrieving a call, redialing, transferring a call, monitoring a call, and viewing call history. (Note: The agent console runs only in Google Chrome version 58 or later.)

Features

1. Go online

When a customer service representative first accesses the agent console, the system automatically sends the agent's information to the server for configuration. After the configuration data is received from the server, click the Online button to log on to the agent console. After you go online, your status changes to Idle. (Note: You can answer and make calls only in the Idle state.) If an agent is not assigned to a skill group, the agent cannot access the agent console. The agent must be added to a skill group in the agent management settings.

2. Go offline

Click the button in the upper-right corner of the agent console page to open a drop-down list. Click the Offline button to go offline. You can no longer make or answer calls.

3. Take a break

An agent enters the Break state in two scenarios: manually setting the status to Break, or automatically entering the Break state after a call rings for 30 seconds without being answered.

  • Click the button in the upper-right corner of the agent console page to open a drop-down list. Click the Break button to enter the Break state. In this state, the system automatically assigns inbound calls to other idle customer service representatives.

  • To improve the call connection rate, if an inbound call rings for 30 seconds and is not answered, the agent's status is automatically set to Break. The call is returned to the agent queue and assigned to another idle agent.

4. End a break

In the Break state, you can choose to end the break or go offline. Click the End Break button to return to the agent console and resume work. Click the Offline button to go offline.

5. Answer a call (inbound)

When the agent console is in the Idle state and an inbound call arrives, a ringtone plays. Click the Answer button to answer the call.

6. Make a call (outbound)

On the agent console page, switch to the Dial tab to make an outbound call. Select an outbound number, enter the customer's number on the numeric keypad, and click the green Dial button or press Enter to make the call. If no outbound number is available, the green Dial button is disabled.

You can select an outbound number in two ways: automatic selection or specified selection. The rules are as follows:

  • If you select automatic selection, the system automatically chooses an outbound number from a location close to the callee's location. The system first tries to select an outbound number from the same location as the callee. If no number from the same location is available, the system then tries to select a number from the same province. If no match is found, a random number is selected. This method can significantly improve the outbound call connection rate.

  • If you select a specified number, that number is used to make the outbound call.

After the customer answers, the agent can begin the conversation.

7. Hang up

While making a call or during a conversation with a customer, click the Hang Up button to end the call. (Note: The Hang Up feature for inbound calls must be configured on the Settings page.)

8. Holding a call

During a conversation with a customer, if an agent needs to confirm business details with a supervisor, the agent can click the Hold Call button. The customer hears a dialing tone and cannot hear the agent. Click the Retrieve Call button to resume the conversation.

9. Mute

Click the Mute button to prevent the customer from hearing you. Click the Unmute button to resume the conversation.

10. Dial pad

If the other party's phone system supports interactive voice response (IVR), you can click the Dial Pad button and use the keypad to navigate the other party's call flow.

11. Post-processing

After an agent hangs up, the console enters the Post-processing state. In this state, the agent cannot answer calls. After you click the Post-processing button, a timer starts counting up, and you can summarize the call.

12. Start answering

After a call ends, the Start Answering button appears. If you do not click this button, your status changes to Idle after a 15-second countdown. If you click the Post-processing button, a timer starts counting up. During this time, click Start Answering to change your status to Idle.

13. Redial

After an outbound call is disconnected, click the Redial button to contact the customer again.

14. Transfer

Calls can be transferred only during a conversation. A direct transfer immediately transfers the call to another agent. A consultation transfer lets you first speak with the agent to whom you are transferring the call. You can then transfer the call or cancel the transfer after the consultation.

(1) Transfer to an agent or skill group: Click Transfer to Agent or Skill Group to display a list of available agents. This includes agents in the Idle state and agents whose mobile phone numbers are configured. Select the agent to whom you want to transfer the call, and then click the Direct Transfer or Consultation Transfer button.

(2) Transfer to an external number: Click Transfer to External Number to switch to the dial pad. Dial the number to which you want to transfer the call, and then click the Direct Transfer or Consultation Transfer button to transfer the call.

15. Call history

Click the Call History tab to view your outbound and inbound call records. Click the phone icon next to a record to call that number back.

16. Monitor

Only skill group leaders and administrators have the permission to monitor active calls. Click the Monitor tab to see a list of agents who are currently on a call. Select an agent and click the Start Monitoring button below to begin monitoring the agent's call. After monitoring begins, you can click the Stop Monitoring button to end the current monitoring session.

17. My work

The My Work section provides statistics on an agent's online duration, outbound calls, and inbound calls. The current skill group is the one the agent has logged on to.

18. Off-site mode

Answer in off-site mode: If an agent clicks to answer in off-site mode, inbound calls to that agent are transferred to the mobile phone number or landline number configured in agent management.

Note:

If a call transferred to the agent's mobile phone or landline is not answered, the agent's status is set to Break. In Break mode, inbound calls are not assigned to the agent. The agent's status automatically returns to Idle after 10 minutes.

Carriers typically have frequency limits for calls to the same number. If you use this mode, contact your carrier to add the numbers used for off-site answering to an allowlist. Otherwise, the agent's mobile phone may fail to receive calls in off-site mode.

Click Go Online in On-site Mode to return to the agent console for answering calls.

Troubleshooting

1. Microphone is not enabled

If the microphone is not enabled, you cannot make or answer calls, and a "Microphone abnormal" page appears. When you first access the console, a Microphone window pops up. Click Allow to use the agent console normally. If you click Block or ×, you cannot use the agent console. If you go offline and then click the Online button again, the Microphone abnormal page appears.

You must click the microphone icon on the right side of the browser's address bar and select Allow https://ccc-v2.aliyun.com to use your microphone. Then, click the Problem solved, go online again button to log on to the agent console again.

2. Duplicate logon

An account can be logged on to only one agent console at a time. If you try to log on with the same account a second time, the logon attempt is blocked.