Public error codes
Updated at:
Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 400 | InvalidPageNumber.ValueNotSupported | The specified PageNumber is not supported. | The PageNumber value exceeds the maximum value. Specify a valid value. | |
| 400 | SingleRequest.OverLimit | A maximum of 1000 URLs are supported for each request. | A maximum of 1000 URLs can be submitted at a time. Reduce the number of URLs and try again. | |
| 403 | %s.NotSupport | The specified resource type %s is not supported. | The specified resource type is not supported. To use this resource type, contact us. | |
| 403 | %s.OverQuota | The quantity of %s exceeds the quota. | The number of this resource exceeds the quota limit. To request a higher quota, contact us. | |
| 403 | %s.WrongValueMatched | The value of specified parameter %s can not pass the matching check. | The value of the specified parameter failed the validation check. If you need to use this parameter value, contact us. | |
| 403 | %sServiceNotFound | The [%s] service is not activated. | The service is not activated. | |
| 400 | Abs.CertRegion.ValueNotSupported | CertRegion is not supported. | The certificate region is not supported. | |
| 400 | Abs.sslProtocol.ValueNotSupported | The specified SSLProtocol is invalid. | The specified SSLProtocol parameter is invalid. | |
| 400 | AccountArrears | The user‘s account is in arrears. | Your account has an overdue payment. The operation cannot be performed. | |
| 400 | AccountBlacklist | Account blacklist restrictions, please submit a work order to contact customer service for processing. | Your account is restricted by a blacklist. Submit a ticket to contact customer service. | |
| 400 | ActiveSiteNotExist | No matched active site. | No activated site matches the specified record name. | |
| 400 | ApplyCertificateNotAllowed | The certificate application is not allowed for current site. | Free certificate application is not allowed for the current site. Make sure the site is activated. To apply for a wildcard domain name certificate, make sure the current site is connected by using the NS method. | |
| 400 | ApplyVanityNSError | Failed to apply for vanity NS resources. Please contact customer service. | Failed to apply for custom NS resources. Contact customer service. | |
| 400 | ApplyVipError | Failed to apply for ip resources, please contact customer service. | Failed to apply for IP resources. Contact customer service. | |
| 400 | ArgQuotaCheckFailed | The passed-in parameter value failed to verify the validity of the plan. Please check the plan document to obtain the range of parameters that can be configured for the site plan. | The current plan does not support configuring restricted parameters. Check the input parameters. | |
| 400 | AuthenticationFailed | Error performing verification. | Identity verification failed. | |
| 403 | AuthenticationFailed | The API authentication failed. | API authentication failed. | |
| 400 | AuthorizeFailed | Failed to authenticate. | Authentication failed. | |
| 400 | BatchSetBusinessError | some configs error:%s | A configuration error occurred: %s. | |
| 400 | BillingMode.NotChanged | The billing model has not been changed. | The billing method has not changed. | |
| 400 | BillingMode.Overdue | The user is not allowed to modify the billing type in the overdue state. | You cannot change the billing method when your account has an overdue payment. | |
| 400 | BillingMode.OverLimit | You can modify the billing type at most once within 24 hours. | The billing method can be changed only once within 24 hours. | |
| 400 | BusinessExist | The domain is being submitted; do not submit again. | The business already exists. Do not submit duplicate requests. | |
| 400 | CacheReserveSiteExceedLimit | The number of binding sites of the cache reserve instance exceeds the limit. The number of binding sites of a single cache reserve instance is limited. Please see the document for the limit. | The number of sites bound to the cache reserve instance exceeds the upper limit. | |
| 400 | CanNotSetSequence | Non-regular configuration, you cannot set Sequence parameters. | The Sequence parameter cannot be set in the global configuration. | |
| 400 | CdnTypeNotSupportExtensiveDomain | Wildcard domain names are not supported. | Wildcard domain names are not supported. | |
| 400 | CertIdentifier.MissingParameter | The input parameter CertIdentifier that is mandatory for processing this request is not supplied. | The CertIdentifier parameter is missing. | |
| 400 | Certificate.DecodeError | An error occurred while decoding the certificate. | Failed to decode the certificate. | |
| 400 | Certificate.Duplicated | The certificate name already exists. | The certificate is duplicated. | |
| 400 | Certificate.EncodeError | An error occurred while encoding the certificate. | The certificate encoding is invalid. | |
| 400 | Certificate.Expired | The certificate has expired. | The certificate has expired. | |
| 400 | Certificate.FormatError | The format of the certificate is invalid. | The certificate format is invalid. | |
| 400 | Certificate.KeyNull | The private key is required. | The private key cannot be empty. | |
| 400 | Certificate.MissingParameter | You must specify the Certificate parameter. | The Certificate parameter is missing from the request. | |
| 400 | Certificate.MissMatch | The SSLPri does not match the certificate. | The certificate and private key do not match. | |
| 400 | Certificate.MissMatch | The certificate does not match the domain. | The certificate and domain name do not match. | |
| 400 | Certificate.NoPrivateKey | The private key of the certificate does not exist. | The private key does not exist. | |
| 400 | Certificate.NotFind | The certificate does not exist. | The certificate does not exist. | |
| 404 | Certificate.NotFound | The specified certificate does not exist. | The specified certificate does not exist. | |
| 400 | Certificate.StatusError | The certificate does not exist, or the status of the certificate is invalid. | The certificate does not exist or the certificate status is invalid. | |
| 400 | Certificate.StatusError | The status of the certificate is invalid. | The certificate status is invalid. | |
| 400 | CertificateContent.Duplicated | The certificate has been uploaded; do not upload again. | The certificate has already been uploaded. Do not upload it again. | |
| 400 | CertNameAlreadyExists | The CertName already exists. | The certificate name already exists. | |
| 400 | CertQuotaCheckFailed | The custom certificate quota verification failed. The number of uploaded certificates exceeds the upper limit allowed for the plan. | The custom certificate quota check failed. The number of uploaded certificates exceeds the upper limit allowed by the plan. | |
| 400 | CertStorage.failed | Error saving the certificate. | Failed to save the certificate. | |
| 400 | CheckCertificateQuotaFailed | Cannot get free type certificate quota, please try later. | Failed to retrieve the free certificate quota. Try again later. | |
| 400 | CheckCertificateQuotaFailed | Cannot get free type certificate usage, please try later. | Failed to retrieve the usage of free certificates. Try again later. | |
| 400 | CheckIcpFailed | Error checking ICP information; please try again later. | Failed to check the ICP filing information. Try again later. | |
| 400 | CheckOrderFailed | Invalid order parameter. | The order parameters are invalid. | |
| 400 | CheckPlanFailed | Invalid planCode value. | The plan parameters are invalid. | |
| 400 | CheckRealTimeLogSlr.PermissionDenied | Role: AliyunServiceRoleForDCDNServicesRealtimeLogPush not exist. | You do not have permissions to create a service-linked role. Contact your Alibaba Cloud account administrator to grant you the AliyunDCDNFullAccess policy or a custom policy for creating service-linked roles. Service name: realtimelogpush.dcdnservices.aliyuncs.com. Action: ram:CreateServiceLinkedRole. | |
| 400 | CheckSourceHealthFailed | Error checking the security. Provide the valid origin site information. | The origin server check failed. Provide valid origin server information. | |
| 400 | ClientCertificate.OverLimit | You are allowed to create 20 client certificates at most under current site. | A maximum of 20 client certificates can be created for the current site. | |
| 400 | CodeVersionInUse | This version of the code is in use. | This code version is currently in use. | |
| 400 | CodeVersionNumberExceedQuotaLimit | code version number exceeds the quota limit. | The number of code versions exceeds the quota limit. | |
| 400 | CompileRuleError | Rule compilation failed, please check the rule information passed in to ensure that the rule is written according to the syntax described in the document. | Rule compilation failed. Check the rule configuration that you passed in. Refer to the rule configuration format described in the API reference. | |
| 400 | ConfExceedLimit | The number of function configurations exceeds the limit. Please check the interface document to see the number of configurations that can be supported by a single function. | The number of configuration items for the current feature has exceeded the system-defined upper limit. | |
| 400 | ConfigConflicts | Configuration conflicts, usually when multiple configurations are configured under the same function of the same site, such as duplicate rule names between multiple configurations. | The parameter uniqueness check failed. Check for duplicate parameter values. | |
| 400 | ConfigDuplicate | The configuration already exists. | The configuration is duplicated. | |
| 400 | ConfigDuplicate | Duplicate configuration. This function has already been configured and cannot be added repeatedly. | The configuration is duplicated. A configuration already exists for this feature. Duplicate configurations are not allowed. | |
| 400 | ConfigExceedLimit | Count of config entries exceeds the limit. | The number of configurations exceeds the limit. | |
| 400 | ConfigGroupAlreadyExist | The configuration group already exists. | The configuration group already exists. | |
| 400 | ConfigGroupNotExist | The specified ConfigGroup does not exist. | The specified ConfigGroup does not exist. | |
| 400 | ConfigIsGraying | The domain configuration is under canary testing. You cannot modify the configuration in production environment. | The domain name configuration is in canary release. Modifications to the production environment configuration are not allowed. | |
| 404 | ConfigNotFound | The specified configid does not exist. | The configid you entered does not exist, or the domain name and configid do not match. Check and try again. | |
| 400 | ConfigOverLimit | The number of config group exceeds the limit. | The number of configuration groups exceeds the quota. | |
| 400 | ConfigParentExceedLimit | Config Parent exceed limit. | The number of referenced advanced condition rules exceeds 5. | |
| 400 | ConfigTooFrequent | The time interval between two configurations is too short. | The interval between two configurations is too short. | |
| 400 | ConfigurationConflicts | The staging environment has a configuration in effect. You cannot modify the production environment configuration. | A configuration exists in the canary environment. The production environment configuration cannot be modified. | |
| 400 | CreateCertificateFailed | Create certificate failed,please try again. | Failed to create the certificate. Create the certificate again. | |
| 400 | CreateFunctionFailed | The configuration of the new site function failed. Please check the CreateSiteFunction interface document and check the parameters. | Failed to add the site feature configuration. Refer to the CreateSiteFunction API reference and check the parameters. | |
| 500 | CreateOrderFailed | Failed to create order. | Failed to place the order. | |
| 400 | CreateRealTimeLogSlr.PermissionDenied | Role: AliyunServiceRoleForDCDNServicesRealtimeLogPush not exist. | You do not have permissions to create a service-linked role. Contact your Alibaba Cloud account administrator to grant you the AliyunDCDNFullAccess policy or a custom policy for creating service-linked roles. Service name: realtimelogpush.dcdnservices.aliyuncs.com. Action: ram:CreateServiceLinkedRole. | |
| 400 | CreateRealTimeLogSlrError | create Role: AliyunServiceRoleForDCDNServicesRealtimeLogPush error. | Failed to create the AliyunServiceRoleForDCDNServicesRealtimeLogPush role. | |
| 400 | CreateSlr.PermissionDenied | You are not authorized to create service-linked roles. Contact your Alibaba Cloud account or an administrator to grant you the AliyunDCDNFullAccess policy or the custom policy used to create service-linked roles. Service name: realtimelogdelivery.dcdn.aliyuncs.com. Action: ram:CreateServiceLinkedRole. | The user does not have authorization to create a service-linked role. Contact the Alibaba Cloud account or the permission management administrator to associate the AliyunDCDNFullAccess policy or a custom policy for creating service-linked roles with the current user. Custom policy information: Service Name: realtimelogdelivery.dcdn.aliyuncs.com. Service-linked role name: AliyunServiceRoleForDCDNRealTimeLogDelivery. User permission required to execute this operation: ram:CreateServiceLinkedRole. | |
| 400 | CreateSlsProjectError | Failed to create a Log Service project. Make sure that you have activated Log Service and the service is in the available state. | Failed to create the Simple Log Service (SLS) project. Make sure that you have activated SLS and that SLS is available. | |
| 400 | CreateTimeError | The effective time of the same policy template cannot overlap. | The effective time periods of the same policy template cannot overlap. | |
| 403 | CreateUBSlsProjectFailed | Create real-time log sls project failed. | Failed to create the real-time log SLS delivery project. | |
| 400 | CustomConfigExist | these domains contains custom config | The domain name list contains a customized template. | |
| 400 | CustomTagIsInvalid | The number of Custom Tag exceeds 20. | The number of tags exceeds 20. | |
| 400 | DataUpdating | Data is updating,please wait. | Data is being updated. Try again later. | |
| 403 | DcdnIpaServiceNotFound | The DCDN IPA service has not been activated. | DCDN IPA service is not activated. | |
| 400 | DcdnService.HasOpened | Your DCDN service has been activated. | You have already activated Dynamic Content Delivery Network (DCDN). | |
| 403 | DcdnServiceNotFound | The DCDN service is not activated. | Your account has not activated the DCDN service. Activate the service and try again. | |
| 403 | DcdnServiceSuspended | Your have overdue payments. | Your account has an overdue payment. | |
| 403 | DcdnServiceSuspended | Your account has overdue payments. | Your account has an overdue payment. | |
| 400 | DDosExpired | The user‘s DDoS protection has expired. | Your DDoS protection has expired. The operation cannot be performed. | |
| 400 | Decode.Error | Error decoding the SSLPub or SSLPri certificate. | Failed to decode the certificate sslpub or sslpri. | |
| 400 | DefenseScene.MultiPolicies.NotSupport | The specified defense scene does not support multiple policies bound to the same domain name. | The specified protection scenario does not support binding multiple policies to the same domain name. | |
| 400 | DeleteFailed | Error deleting the certificate. | Failed to delete the certificate. | |
| 400 | DeleteFunctionFailed | Batch delete functions failed. | Failed to delete configurations in batches. | |
| 400 | DeliverExceedLimit | The maximum number of subscribed tasks is exceeded. | The number of subscription tasks has reached the upper limit. | |
| 400 | DependedByOthers | An error occurred depending on another service. | An error occurred in a dependent service. | |
| 400 | Domain.BeianInvalid | You are not allowed to perform this operation because the ICP license of your domain is invalid in Chinese Mainland. | The ICP filing of the domain name for the Chinese mainland region is invalid. | |
| 400 | Domain.Bound.DefaultAndCustom | The specified domain name is bound to both default and custom policies. | The specified domain name is bound to both the default policy and a custom policy. | |
| 400 | Domain.DDosAlreadyExists | This specified domain has been in DDoS. | This domain name is already connected to Alibaba Cloud Anti-DDoS. Remove it before connecting to DCDN DDoS protection. | |
| 400 | Domain.DDosQuotaFull | The user’s domain quota for DDos is full. | The number of protected domain names has reached the upper limit. Upgrade your plan to increase the domain name quota. | |
| 403 | Domain.NotSupport.Waf | The specified domain name does not support WAF. | The specified domain name does not support WAF. | |
| 400 | Domain.PortAllocateError | Your port resource allocation failed, please try again in 30 minutes. | Resource allocation for the custom ports you submitted failed. Try again after 30 minutes. If the issue persists after multiple retries, submit a ticket. | |
| 400 | Domain.PortConfiguring | This specified domain's special ports are configuring. | The special port configuration for the domain name is in progress. Try again later. | |
| 400 | Domain.QuotaFull | The user’s domain quota for the product is full. | The domain name quota has been exceeded. | |
| 400 | DomainActiveInConfigGroup | The domain has been activated in config group, it cannot be deleted. | This domain name is already activated in a configuration group and cannot be deleted. | |
| 400 | DomainAlreadyExist | The specified domain already exists. | This domain name already exists. | |
| 400 | DomainBindAndUnbind.Overlapped | The specified bind and unbind domain names overlap. | The specified domain names to bind and unbind overlap. | |
| 400 | DomainExist.OtherProduct | The domain already exists in %s. | The domain name already exists in another product under your account. | |
| 400 | DomainExist.OtherUser | This domain is already added by another user. | The domain name has already been added by another user. | |
| 400 | DomainHasUnsuccessConfig | Domain has unsuccessful config. | The domain name has configurations in a non-successful state. | |
| 400 | DomainInBlacklist | The domain is in the blacklist. | This domain name is in the blacklist. | |
| 403 | DomainInProtectedMode | The domain is in protection mode. To request permission, contact Customer Service. | This domain name is in protected mode. To perform this operation, contact us. | |
| 400 | DomainInRiskList | The domain you added may be at risk. If you have any questions, please submit a ticket. | The domain name you are adding may pose a risk. If you have any questions, submit a ticket. | |
| 400 | DomainInSafeMode | The domain is in safe mode. To request permission, contact Customer Service. | This domain name is in security pattern. To perform this operation, submit a ticket to contact us. | |
| 400 | DomainNameOverLimit | A maximum of 500 domains are supported for each request. | A maximum of 500 domain names are supported in a single request. Reduce the number of domain names and try again. | |
| 400 | DomainNameOverLimit | A maximum of 50 domains is supported for each request. | A maximum of 50 domain names are supported in a single request. Reduce the number of domain names and try again. | |
| 400 | DomainNotFound | domain not found | The domain name was not found. | |
| 400 | DomainNotRegistration | The specified domain name is not filed for ICP. | The domain name does not have an ICP filing. Obtain an ICP filing first. | |
| 400 | DomainOverLimit | The maximum number of domains is exceeded. | The number of domain names has reached the upper limit. | |
| 400 | DomainOwnerVerifyFail | Owner verification of the root domain failed. | When you add a new domain name to Alibaba Cloud DCDN for the first time, you must verify domain name ownership. You can successfully add the domain name only after you configure DNS resolution or file verification as required. | |
| 400 | DomainReserved | The root domain of your domain is reserved by another account. Submit a ticket to contact customer support. | The root domain of this domain name is already occupied by another account. To add it, submit a ticket. | |
| 400 | DomainTraffic.ExceedThreshold | You are not allowed to perform this operation because the traffic peak of the last day exceeds the threshold. | The domain name cannot be switched because its peak traffic yesterday exceeded the limit. | |
| 400 | DomainVerifyFail | Domain verification failed. | Domain name verification failed. | |
| 400 | Duplicate.TagKey | The specified TagKey is duplicated. | The TagKey is duplicated. Enter a different TagKey. | |
| 400 | DuplicateRequirementTicket | You have already submitted the requirement ticket. Do not submit it again. | You have already submitted a request. Do not submit it again. | |
| 400 | EdgeRoutine.GeneralError | A server error occurred: %s | A backend server error occurred: %s. If the error persists after multiple retries, submit a ticket. | |
| 500 | EdgeRoutine.GeneralError.%s | A server error occurred: %s | A backend server error occurred. If the error persists after multiple retries, submit a ticket. | |
| 400 | EdgeScripOptionsHasInnerConfig | The extension has a background configuration or a parameter of this configuration is invalid. For more information, submit a ticket. | The extension has a backend configuration, or the parameters of the configuration are invalid. If you have questions, submit a ticket. | |
| 400 | EdgeScriptCountExceedLimit | The number of rules exceeds the default limit. | The number of default rules has exceeded the limit. To increase the limit, submit a ticket. | |
| 400 | EdgeScriptGrammarNotSupport | A background customization rule exists or a parameter of this configuration is invalid. For more information, submit a ticket. | A backend custom rule exists, or the parameters of the configuration are invalid. If you have questions, submit a ticket. | |
| 400 | EdgeScriptNotSupportJs | JavaScript rules are not supported. For more information, submit a ticket. | JS rules are not available. If you have questions, submit a ticket. | |
| 400 | EntityNotExist.ResourceGroup | The resource group does not exist. | The specified resource group does not exist. | |
| 400 | EntityNotExist.Role | The specified role does not exist. | The specified role does not exist. | |
| 400 | EntityNotExists.ResourceDir | The account is not a master or a member of a resource directory. | The current account is not a primary account or a member of the resource directory. | |
| 400 | EntityNotExists.ResourceGroup | The resource group does not exist. | The specified resource group does not exist. | |
| 400 | ErrDomainReserved | Domain is reserved. | The domain name is in protection status. | |
| 400 | ErrSiteIdNoteEnterprise | Site must be Enterprise Edition. | The site must use the Enterprise Edition. | |
| 400 | ErrSmartScheduleOn | Smart Schedule must be off. | The intelligent scrubbing switch must be turned off. | |
| 400 | ErService.HasOpened | Your er service has opened. | The ER service is already activated for your account. | |
| 403 | ErService.NotOpen | Er service has not opend. | The ER service is not enabled. | |
| 400 | ExceedFileUpload | The size of upload file must be less than 10MB. | The uploaded file must be smaller than 10 MB. | |
| 403 | Expression.Invalid | The specified expression is invalid: %s. | The specified expression is invalid. | |
| 400 | ExtensiveAndAllBothExist | A wildcard domain name and a domain name with an all. prefix cannot be both specified. | A wildcard domain name and a domain name that starts with "all." cannot coexist. | |
| 400 | ExtensiveAndSpecificDomainConflict | The wildcard domain name overlaps a domain name at the same level. | A wildcard domain name and an exact domain name at the same level are mutually exclusive. Add the domain name again. | |
| 400 | FlowControlError | The request was denied due to flow control. | The API operation is throttled. | |
| 403 | Forbidden.RAM | You are not authorized to operate this resource, or this API does not support RAM. | You are not authorized to perform operations on this resource, or this API operation does not support RAM. | |
| 400 | Function.ArgDuplicate | Duplicate feature parameters. | The feature parameters conflict with each other. | |
| 400 | Function.DependedByOthers | The specified config is depended by others. | The specified configuration is depended on by other configurations. | |
| 400 | Function.ExceedLimit | The maximum number of configurations of the feature is exceeded. | The number of configurations under this feature has exceeded the limit. | |
| 400 | Function.InvalidParentId | The specified parentId does not exist. | The specified rule condition does not exist. | |
| 400 | Function.Unsupported | The specified feature is not supported. | The feature is not supported. | |
| 400 | FunctionConflict | The feature configuration conflicts. Sites with version management enabled cannot configure this feature. | The current feature configuration conflicts with other features. Delete the conflicting feature configuration before proceeding. | |
| 400 | FunctionMutex | This configuration conflicts with another configuration. | The configuration you set conflicts with other configurations. | |
| 400 | FunctionQuotaCheckFailed | The quota verification for this function fails. It may be that the configuration of this function exceeds the limit of the site plan. Please check the plan introduction document corresponding to this site. | The current plan does not support the restricted function. Check the feature descriptions of the plan. | |
| 401 | GetTokenFailed | Failed to obtain a token. | Failed to obtain the token. | |
| 400 | GrayConfigExist | A canary configuration already exists under the domain. | The domain name already has other grayscale configurations. | |
| 400 | GrayConfigIsNull | You cannot delete all configurations. At least one configuration must be kept. | You cannot delete all grayscale configurations. At least one configuration must be retained. | |
| 400 | GrayConfigIsNull | You cannot delete all gary configurations. You can clear them by rolling back the simulation environment. | Deleting all rules in the impersonation environment does not clear the configurations on the point of presence (POP). You can rollback the impersonation environment to clear the configurations. | |
| 400 | IcpBlack | The domain is on the ICP blacklist. | The domain name is on the MIIT blacklist. | |
| 400 | IllegalOperation | You are not authorized to operate this domain. | The domain name is invalid and cannot be operated on. | |
| 400 | IllegalOperation | You are not authorized to operate this config template. | You do not have the permissions to manage the configuration group. | |
| 400 | IllegalOperation.VersionManagement | The current operation of version management is illegal. | The version management change operation is invalid. | |
| 400 | IllegalOperationDomain | You are not authorized to operate the domain. | You do not have the permissions to manage this domain name. | |
| 403 | IllegalOriginSiteIp | The specified origin site IP address is invalid. | The origin IP address is invalid and cannot be added. | |
| 400 | IllegalSources | The specified origin site information is invalid. | The origin information is invalid. Enter valid information. | |
| 400 | IncompleteInformation | Your information is incomplete. Complete your information before the operation. | Your information is incomplete. Complete the required information first. | |
| 400 | Instance.NotOnline | The specified instance is not online. | The plan instance is not in the active state. | |
| 400 | InstanceBusy | The instance is being modified. | The instance is being reconfigured. | |
| 400 | InstanceNotExist | The current package instance does not exist. | The specified plan instance does not exist. | |
| 500 | Internal Exception | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. Try again later or contact us. | |
| 500 | Internal.ConfigError | An error occurred while configuring the certificate. | The configuration API call failed. | |
| 500 | Internal.CreateCSRError | Failed to create the CSR. | Failed to generate the CSR. | |
| 500 | Internal.EncodeCSRError | Failed to encode the CSR. | Failed to encode the CSR. | |
| 500 | Internal.EncodeKeyError | Failed to encode the private key. | Failed to encode the private key. | |
| 500 | Internal.ForbidError | You cannot modify the configurations when some features of the domain are in a canary deployment. | A feature of this domain name is in canary release and cannot be modified. | |
| 500 | Internal.KeyError | Failed to generate the RSA key. | Failed to generate the RSA private key. | |
| 500 | InternalError | An internal error occurred; please try again later. | An internal error occurred. Try again. If the error persists after multiple retries, submit a ticket. | |
| 400 | InternalError | The request processing has failed due to some unknown error. | An internal error occurred. Try again. If the error persists after multiple retries, submit a ticket. | |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. Try again later or contact us. | |
| 400 | InternalError | An internal exception occurred, please try again later. | An internal exception was triggered. Try again later. | |
| 400 | InternalException | An internal exception occurred, please try again later. | An internal exception was triggered. Try again later. | |
| 400 | InternalOperationError | Internal error in backend service. | An internal error occurred in the backend service. | |
| 400 | InvaildIpAddrList.LengthTooLong | The Specified IpAddrList is too long. | The batch parameter exceeds the limit. A maximum of 20 entries are allowed per query. | |
| 400 | InvaildParameter | The specified parameters are invalid. | The provided parameters are invalid. Check the parameters and try again. | |
| 400 | InvaildParameter | The domain must differ from the origin site. | The domain name and origin cannot be the same. Modify the settings and resubmit. | |
| 400 | InvaildParameter | The specified DomainName is invalid. | The domain name parameter is invalid. Enter a valid domain name. | |
| 400 | InvaildParameter | The specified origin site IP format is invalid. | The domain name parameter is invalid. Enter a valid domain name. | |
| 403 | InvaildParameter | The parameter you provided is invalid. | The input parameter format is invalid. | |
| 400 | InvaildParameterDomainName | The specified DomainName is invalid. | The DomainName parameter is invalid. Enter a valid value. | |
| 400 | InvaildParameterSource | The domain must be different from the origin site. | The domain name and origin cannot be the same. Modify the settings and resubmit. | |
| 400 | Invalid%s.Malformed | The specified ArgValue [%s] is invalid. | The specified ArgValue is not supported. Enter a valid ArgValue. | |
| 400 | Invalid%s.ValueNotSupported | FunctionName [%s] is not supported. | The specified configuration is not supported. Submit a new query. | |
| 400 | Invalid%s.ValueNotSupported | [%s] is not supported. | The specified setting is not supported. | |
| 400 | Invalid.Parameter | The specified parameter is invalid. | The input parameter is invalid. | |
| 400 | Invalid.Value | The request Value is invalid. | The request Value is invalid. | |
| 400 | InvalidAccount.Malformed | The specified account is invalid. | The account input is invalid, for example, the input is empty. | |
| 404 | InvalidAccount.NotFound | The specified account does not exist. | The account does not exist or has not been created. | |
| 404 | InvalidApp.NotFound | Specified app is not found. | The specified app cannot be found. | |
| 400 | InvalidAreaParameter | The specified Area is invalid. | The Area parameter is invalid. | |
| 400 | InvalidArgName | The parameter name does not exist, please check the function interface document. | The specified parameter name does not exist. Refer to the API reference documentation. | |
| 400 | InvalidArgName.ValueNotSupported | %s | The parameter name %s is not supported (%s indicates the specific parameter name). | |
| 400 | InvalidArgValue.Malformed | The specified ArgValue is invalid. | The ArgValue is invalid. Enter a valid value. | |
| 400 | InvalidArgValue.Malformed | %s | %s | |
| 400 | InvalidPageNumber.ValueNotSupported | The specified PageNumber is not supported. | The PageNumber value exceeds the maximum value. Specify a valid value. | |
| 400 | SingleRequest.OverLimit | A maximum of 1000 URLs are supported for each request. | A maximum of 1000 URLs can be submitted at a time. Reduce the number of URLs and try again. | |
| 403 | %s.NotSupport | The specified resource type %s is not supported. | The specified resource type is not supported. To use this resource type, contact us. | |
| 403 | %s.OverQuota | The quantity of %s exceeds the quota. | The number of this resource exceeds the quota limit. To request a higher quota, contact us. | |
| 403 | %s.WrongValueMatched | The value of specified parameter %s can not pass the matching check. | The value of the specified parameter failed the validation check. If you need to use this parameter value, contact us. | |
| 403 | %sServiceNotFound | The [%s] service is not activated. | The service is not activated. | |
| 400 | Abs.CertRegion.ValueNotSupported | CertRegion is not supported. | The certificate region is not supported. | |
| 400 | Abs.sslProtocol.ValueNotSupported | The specified SSLProtocol is invalid. | The specified SSLProtocol parameter is invalid. | |
| 400 | AccountArrears | The user‘s account is in arrears. | Your account has an overdue payment. The operation cannot be performed. | |
| 400 | AccountBlacklist | Account blacklist restrictions, please submit a work order to contact customer service for processing. | Your account is restricted by a blacklist. Submit a ticket to contact customer service. | |
| 400 | ActiveSiteNotExist | No matched active site. | No activated site matches the specified record name. | |
| 400 | ApplyCertificateNotAllowed | The certificate application is not allowed for current site. | Free certificate application is not allowed for the current site. Make sure the site is activated. To apply for a wildcard domain name certificate, make sure the current site is connected by using the NS method. | |
| 400 | ApplyVanityNSError | Failed to apply for vanity NS resources. Please contact customer service. | Failed to apply for custom NS resources. Contact customer service. | |
| 400 | ApplyVipError | Failed to apply for ip resources, please contact customer service. | Failed to apply for IP resources. Contact customer service. | |
| 400 | ArgQuotaCheckFailed | The passed-in parameter value failed to verify the validity of the plan. Please check the plan document to obtain the range of parameters that can be configured for the site plan. | The current plan does not support configuring restricted parameters. Check the input parameters. | |
| 400 | AuthenticationFailed | Error performing verification. | Identity verification failed. | |
| 403 | AuthenticationFailed | The API authentication failed. | API authentication failed. | |
| 400 | AuthorizeFailed | Failed to authenticate. | Authentication failed. | |
| 400 | BatchSetBusinessError | some configs error:%s | A configuration error occurred: %s. | |
| 400 | BillingMode.NotChanged | The billing model has not been changed. | The billing method has not changed. | |
| 400 | BillingMode.Overdue | The user is not allowed to modify the billing type in the overdue state. | You cannot change the billing method when your account has an overdue payment. | |
| 400 | BillingMode.OverLimit | You can modify the billing type at most once within 24 hours. | The billing method can be changed only once within 24 hours. | |
| 400 | BusinessExist | The domain is being submitted; do not submit again. | The business already exists. Do not submit duplicate requests. | |
| 400 | CacheReserveSiteExceedLimit | The number of binding sites of the cache reserve instance exceeds the limit. The number of binding sites of a single cache reserve instance is limited. Please see the document for the limit. | The number of sites bound to the cache reserve instance exceeds the upper limit. | |
| 400 | CanNotSetSequence | Non-regular configuration, you cannot set Sequence parameters. | The Sequence parameter cannot be set in the global configuration. | |
| 400 | CdnTypeNotSupportExtensiveDomain | Wildcard domain names are not supported. | Wildcard domain names are not supported. | |
| 400 | CertIdentifier.MissingParameter | The input parameter CertIdentifier that is mandatory for processing this request is not supplied. | The CertIdentifier parameter is missing. | |
| 400 | Certificate.DecodeError | An error occurred while decoding the certificate. | Failed to decode the certificate. | |
| 400 | Certificate.Duplicated | The certificate name already exists. | The certificate is duplicated. | |
| 400 | Certificate.EncodeError | An error occurred while encoding the certificate. | The certificate encoding is invalid. | |
| 400 | Certificate.Expired | The certificate has expired. | The certificate has expired. | |
| 400 | Certificate.FormatError | The format of the certificate is invalid. | The certificate format is invalid. | |
| 400 | Certificate.KeyNull | The private key is required. | The private key cannot be empty. | |
| 400 | Certificate.MissingParameter | You must specify the Certificate parameter. | The Certificate parameter is missing from the request. | |
| 400 | Certificate.MissMatch | The SSLPri does not match the certificate. | The certificate and private key do not match. | |
| 400 | Certificate.MissMatch | The certificate does not match the domain. | The certificate and domain name do not match. | |
| 400 | Certificate.NoPrivateKey | The private key of the certificate does not exist. | The private key does not exist. | |
| 400 | Certificate.NotFind | The certificate does not exist. | The certificate does not exist. | |
| 404 | Certificate.NotFound | The specified certificate does not exist. | The specified certificate does not exist. | |
| 400 | Certificate.StatusError | The certificate does not exist, or the status of the certificate is invalid. | The certificate does not exist or the certificate status is invalid. | |
| 400 | Certificate.StatusError | The status of the certificate is invalid. | The certificate status is invalid. | |
| 400 | CertificateContent.Duplicated | The certificate has been uploaded; do not upload again. | The certificate has already been uploaded. Do not upload it again. | |
| 400 | CertNameAlreadyExists | The CertName already exists. | The certificate name already exists. | |
| 400 | CertQuotaCheckFailed | The custom certificate quota verification failed. The number of uploaded certificates exceeds the upper limit allowed for the plan. | The custom certificate quota check failed. The number of uploaded certificates exceeds the upper limit allowed by the plan. | |
| 400 | CertStorage.failed | Error saving the certificate. | Failed to save the certificate. | |
| 400 | CheckCertificateQuotaFailed | Cannot get free type certificate quota, please try later. | Failed to retrieve the free certificate quota. Try again later. | |
| 400 | CheckCertificateQuotaFailed | Cannot get free type certificate usage, please try later. | Failed to retrieve the usage of free certificates. Try again later. | |
| 400 | CheckIcpFailed | Error checking ICP information; please try again later. | Failed to check the ICP filing information. Try again later. | |
| 400 | CheckOrderFailed | Invalid order parameter. | The order parameters are invalid. | |
| 400 | CheckPlanFailed | Invalid planCode value. | The plan parameters are invalid. | |
| 400 | CheckRealTimeLogSlr.PermissionDenied | Role: AliyunServiceRoleForDCDNServicesRealtimeLogPush not exist. | You do not have permissions to create a service-linked role. Contact your Alibaba Cloud account administrator to grant you the AliyunDCDNFullAccess policy or a custom policy for creating service-linked roles. Service name: realtimelogpush.dcdnservices.aliyuncs.com. Action: ram:CreateServiceLinkedRole. | |
| 400 | CheckSourceHealthFailed | Error checking the security. Provide the valid origin site information. | The origin server check failed. Provide valid origin server information. | |
| 400 | ClientCertificate.OverLimit | You are allowed to create 20 client certificates at most under current site. | A maximum of 20 client certificates can be created for the current site. | |
| 400 | CodeVersionInUse | This version of the code is in use. | This code version is currently in use. | |
| 400 | CodeVersionNumberExceedQuotaLimit | code version number exceeds the quota limit. | The number of code versions exceeds the quota limit. | |
| 400 | CompileRuleError | Rule compilation failed, please check the rule information passed in to ensure that the rule is written according to the syntax described in the document. | Rule compilation failed. Check the rule configuration that you passed in. Refer to the rule configuration format described in the API reference. | |
| 400 | ConfExceedLimit | The number of function configurations exceeds the limit. Please check the interface document to see the number of configurations that can be supported by a single function. | The number of configuration items for the current feature has exceeded the system-defined upper limit. | |
| 400 | ConfigConflicts | Configuration conflicts, usually when multiple configurations are configured under the same function of the same site, such as duplicate rule names between multiple configurations. | The parameter uniqueness check failed. Check for duplicate parameter values. | |
| 400 | ConfigDuplicate | The configuration already exists. | The configuration is duplicated. | |
| 400 | ConfigDuplicate | Duplicate configuration. This function has already been configured and cannot be added repeatedly. | The configuration is duplicated. A configuration already exists for this feature. Duplicate configurations are not allowed. | |
| 400 | ConfigExceedLimit | Count of config entries exceeds the limit. | The number of configurations exceeds the limit. | |
| 400 | ConfigGroupAlreadyExist | The configuration group already exists. | The configuration group already exists. | |
| 400 | ConfigGroupNotExist | The specified ConfigGroup does not exist. | The specified ConfigGroup does not exist. | |
| 400 | ConfigIsGraying | The domain configuration is under canary testing. You cannot modify the configuration in production environment. | The domain name configuration is in canary release. Modifications to the production environment configuration are not allowed. | |
| 404 | ConfigNotFound | The specified configid does not exist. | The configid you entered does not exist, or the domain name and configid do not match. Check and try again. | |
| 400 | ConfigOverLimit | The number of config group exceeds the limit. | The number of configuration groups exceeds the quota. | |
| 400 | ConfigParentExceedLimit | Config Parent exceed limit. | The number of referenced advanced condition rules exceeds 5. | |
| 400 | ConfigTooFrequent | The time interval between two configurations is too short. | The interval between two configurations is too short. | |
| 400 | ConfigurationConflicts | The staging environment has a configuration in effect. You cannot modify the production environment configuration. | A configuration exists in the canary environment. The production environment configuration cannot be modified. | |
| 400 | CreateCertificateFailed | Create certificate failed,please try again. | Failed to create the certificate. Create the certificate again. | |
| 400 | CreateFunctionFailed | The configuration of the new site function failed. Please check the CreateSiteFunction interface document and check the parameters. | Failed to add the site feature configuration. Refer to the CreateSiteFunction API reference and check the parameters. | |
| 500 | CreateOrderFailed | Failed to create order. | Failed to place the order. | |
| 400 | CreateRealTimeLogSlr.PermissionDenied | Role: AliyunServiceRoleForDCDNServicesRealtimeLogPush not exist. | You do not have permissions to create a service-linked role. Contact your Alibaba Cloud account administrator to grant you the AliyunDCDNFullAccess policy or a custom policy for creating service-linked roles. Service name: realtimelogpush.dcdnservices.aliyuncs.com. Action: ram:CreateServiceLinkedRole. | |
| 400 | CreateRealTimeLogSlrError | create Role: AliyunServiceRoleForDCDNServicesRealtimeLogPush error. | Failed to create the AliyunServiceRoleForDCDNServicesRealtimeLogPush role. | |
| 400 | CreateSlr.PermissionDenied | You are not authorized to create service-linked roles. Contact your Alibaba Cloud account or an administrator to grant you the AliyunDCDNFullAccess policy or the custom policy used to create service-linked roles. Service name: realtimelogdelivery.dcdn.aliyuncs.com. Action: ram:CreateServiceLinkedRole. | The user does not have the authorization to create a service-linked role. Contact the Alibaba Cloud account owner or the permission management administrator to grant the current user the AliyunDCDNFullAccess policy or a custom policy that associates the permission to create a service-linked role. The custom policy contains the following information: Service Name: realtimelogdelivery.dcdn.aliyuncs.com. Service-linked role name: AliyunServiceRoleForDCDNRealTimeLogDelivery. Permission required to execute this operation: ram:CreateServiceLinkedRole. | |
| 400 | CreateSlsProjectError | Failed to create a Log Service project. Make sure that you have activated Log Service and the service is in the available state. | Failed to create the Simple Log Service (SLS) project. Make sure that you have activated SLS and that SLS is available. | |
| 400 | CreateTimeError | The effective time of the same policy template cannot overlap. | The effective time periods of the same policy template cannot overlap. | |
| 403 | CreateUBSlsProjectFailed | Create real-time log sls project failed. | Failed to create the real-time log SLS delivery project. | |
| 400 | CustomConfigExist | these domains contains custom config | The domain name list contains a customized template. | |
| 400 | CustomTagIsInvalid | The number of Custom Tag exceeds 20. | The number of tags exceeds 20. | |
| 400 | DataUpdating | Data is updating,please wait. | Data is being updated. Try again later. | |
| 403 | DcdnIpaServiceNotFound | The DCDN IPA service has not been activated. | DCDN IPA service is not activated. | |
| 400 | DcdnService.HasOpened | Your DCDN service has been activated. | You have already activated Dynamic Content Delivery Network (DCDN). | |
| 403 | DcdnServiceNotFound | The DCDN service is not activated. | Your account has not activated the DCDN service. Activate the service and try again. | |
| 403 | DcdnServiceSuspended | Your have overdue payments. | Your account has an overdue payment. | |
| 403 | DcdnServiceSuspended | Your account has overdue payments. | Your account has an overdue payment. | |
| 400 | DDosExpired | The user‘s DDoS protection has expired. | Your DDoS protection has expired. The operation cannot be performed. | |
| 400 | Decode.Error | Error decoding the SSLPub or SSLPri certificate. | Failed to decode the certificate sslpub or sslpri. | |
| 400 | DefenseScene.MultiPolicies.NotSupport | The specified defense scene does not support multiple policies bound to the same domain name. | The specified protection scenario does not support binding multiple policies to the same domain name. | |
| 400 | DeleteFailed | Error deleting the certificate. | Failed to delete the certificate. | |
| 400 | DeleteFunctionFailed | Batch delete functions failed. | Failed to delete configurations in batches. | |
| 400 | DeliverExceedLimit | The maximum number of subscribed tasks is exceeded. | The number of subscription tasks has reached the upper limit. | |
| 400 | DependedByOthers | An error occurred depending on another service. | An error occurred in a dependent service. | |
| 400 | Domain.BeianInvalid | You are not allowed to perform this operation because the ICP license of your domain is invalid in Chinese Mainland. | The ICP filing of the domain name for the Chinese mainland region is invalid. | |
| 400 | Domain.Bound.DefaultAndCustom | The specified domain name is bound to both default and custom policies. | The specified domain name is bound to both the default policy and a custom policy. | |
| 400 | Domain.DDosAlreadyExists | This specified domain has been in DDoS. | This domain name is already connected to Alibaba Cloud Anti-DDoS. Remove it before connecting to DCDN DDoS protection. | |
| 400 | Domain.DDosQuotaFull | The user’s domain quota for DDos is full. | The number of protected domain names has reached the upper limit. Upgrade your plan to increase the domain name quota. | |
| 403 | Domain.NotSupport.Waf | The specified domain name does not support WAF. | The specified domain name does not support WAF. | |
| 400 | Domain.PortAllocateError | Your port resource allocation failed, please try again in 30 minutes. | Resource allocation for the custom ports you submitted failed. Try again after 30 minutes. If the issue persists after multiple retries, submit a ticket. | |
| 400 | Domain.PortConfiguring | This specified domain's special ports are configuring. | The special port configuration for the domain name is in progress. Try again later. | |
| 400 | Domain.QuotaFull | The user’s domain quota for the product is full. | The domain name quota has been exceeded. | |
| 400 | DomainActiveInConfigGroup | The domain has been activated in config group, it cannot be deleted. | This domain name is already activated in a configuration group and cannot be deleted. | |
| 400 | DomainAlreadyExist | The specified domain already exists. | This domain name already exists. | |
| 400 | DomainBindAndUnbind.Overlapped | The specified bind and unbind domain names overlap. | The specified domain names to bind and unbind overlap. | |
| 400 | DomainExist.OtherProduct | The domain already exists in %s. | The domain name already exists in another product under your account. | |
| 400 | DomainExist.OtherUser | This domain is already added by another user. | The domain name has already been added by another user. | |
| 400 | DomainHasUnsuccessConfig | Domain has unsuccessful config. | The domain name has configurations in a non-successful state. | |
| 400 | DomainInBlacklist | The domain is in the blacklist. | This domain name is in the blacklist. | |
| 403 | DomainInProtectedMode | The domain is in protection mode. To request permission, contact Customer Service. | This domain name is in protected mode. To perform this operation, contact us. | |
| 400 | DomainInRiskList | The domain you added may be at risk. If you have any questions, please submit a ticket. | The domain name you are adding may pose a risk. If you have any questions, submit a ticket. | |
| 400 | DomainInSafeMode | The domain is in safe mode. To request permission, contact Customer Service. | This domain name is in safe mode. To perform this operation, submit a ticket to contact us. | |
| 400 | DomainNameOverLimit | A maximum of 500 domains are supported for each request. | A maximum of 500 domain names are supported in a single request. Reduce the number of domain names and try again. | |
| 400 | DomainNameOverLimit | A maximum of 50 domains is supported for each request. | A maximum of 50 domain names are supported in a single request. Reduce the number of domain names and try again. | |
| 400 | DomainNotFound | domain not found | The domain name was not found. | |
| 400 | DomainNotRegistration | The specified domain name is not filed for ICP. | The domain name does not have an ICP filing. Obtain an ICP filing first. | |
| 400 | DomainOverLimit | The maximum number of domains is exceeded. | The number of domain names has reached the upper limit. | |
| 400 | DomainOwnerVerifyFail | Owner verification of the root domain failed. | When you add a new domain name to Alibaba Cloud DCDN for the first time, you must verify domain name ownership. You can successfully add the domain name only after you configure DNS resolution or file verification as required. | |
| 400 | DomainReserved | The root domain of your domain is reserved by another account. Submit a ticket to contact customer support. | The root domain of this domain name is already occupied by another account. To add it, submit a ticket. | |
| 400 | DomainTraffic.ExceedThreshold | You are not allowed to perform this operation because the traffic peak of the last day exceeds the threshold. | The domain name cannot be switched because its peak traffic yesterday exceeded the limit. | |
| 400 | DomainVerifyFail | Domain verification failed. | Domain name verification failed. | |
| 400 | Duplicate.TagKey | The specified TagKey is duplicated. | The TagKey is duplicated. Enter a different TagKey. | |
| 400 | DuplicateRequirementTicket | You have already submitted the requirement ticket. Do not submit it again. | You have already submitted a request. Do not submit it again. | |
| 400 | EdgeRoutine.GeneralError | A server error occurred: %s | A backend server error occurred: %s. If the error persists after multiple retries, submit a ticket. | |
| 500 | EdgeRoutine.GeneralError.%s | A server error occurred: %s | A backend server error occurred. If the error persists after multiple retries, submit a ticket. | |
| 400 | EdgeScripOptionsHasInnerConfig | The extension has a background configuration or a parameter of this configuration is invalid. For more information, submit a ticket. | The extension has a backend configuration, or the parameters of the configuration are invalid. If you have questions, submit a ticket. | |
| 400 | EdgeScriptCountExceedLimit | The number of rules exceeds the default limit. | The number of default rules has exceeded the limit. To increase the limit, submit a ticket. | |
| 400 | EdgeScriptGrammarNotSupport | A background customization rule exists or a parameter of this configuration is invalid. For more information, submit a ticket. | A backend custom rule exists, or the parameters of the configuration are invalid. If you have questions, submit a ticket. | |
| 400 | EdgeScriptNotSupportJs | JavaScript rules are not supported. For more information, submit a ticket. | JS rules are not available. If you have questions, submit a ticket. | |
| 400 | EntityNotExist.ResourceGroup | The resource group does not exist. | The specified resource group does not exist. | |
| 400 | EntityNotExist.Role | The specified role does not exist. | The specified role does not exist. | |
| 400 | EntityNotExists.ResourceDir | The account is not a master or a member of a resource directory. | The current account is not a primary account or a member of the resource directory. | |
| 400 | EntityNotExists.ResourceGroup | The resource group does not exist. | The specified resource group does not exist. | |
| 400 | ErrDomainReserved | Domain is reserved. | The domain name is in protection status. | |
| 400 | ErrSiteIdNoteEnterprise | Site must be Enterprise Edition. | The site must use the Enterprise Edition. | |
| 400 | ErrSmartScheduleOn | Smart Schedule must be off. | The intelligent scrubbing switch must be turned off. | |
| 400 | ErService.HasOpened | Your er service has opened. | The ER service is already activated for your account. | |
| 403 | ErService.NotOpen | Er service has not opend. | The ER service is not enabled. | |
| 400 | ExceedFileUpload | The size of upload file must be less than 10MB. | The uploaded file must be smaller than 10 MB. | |
| 403 | Expression.Invalid | The specified expression is invalid: %s. | The specified expression is invalid. | |
| 400 | ExtensiveAndAllBothExist | A wildcard domain name and a domain name with an all. prefix cannot be both specified. | A wildcard domain name and a domain name that starts with "all." cannot coexist. | |
| 400 | ExtensiveAndSpecificDomainConflict | The wildcard domain name overlaps a domain name at the same level. | A wildcard domain name and an exact domain name at the same level are mutually exclusive. Add the domain name again. | |
| 400 | FlowControlError | The request was denied due to flow control. | The API operation is throttled. | |
| 403 | Forbidden.RAM | You are not authorized to operate this resource, or this API does not support RAM. | You are not authorized to perform operations on this resource, or this API operation does not support RAM. | |
| 400 | Function.ArgDuplicate | Duplicate feature parameters. | The feature parameters conflict with each other. | |
| 400 | Function.DependedByOthers | The specified config is depended by others. | The specified configuration is depended on by other configurations. | |
| 400 | Function.ExceedLimit | The maximum number of configurations of the feature is exceeded. | The number of configurations under this feature has exceeded the limit. | |
| 400 | Function.InvalidParentId | The specified parentId does not exist. | The specified rule condition does not exist. | |
| 400 | Function.Unsupported | The specified feature is not supported. | The feature is not supported. | |
| 400 | FunctionConflict | The feature configuration conflicts. Sites with version management enabled cannot configure this feature. | The current feature configuration conflicts with other features. Delete the conflicting feature configuration before proceeding. | |
| 400 | FunctionMutex | This configuration conflicts with another configuration. | The configuration you set conflicts with other configurations. | |
| 400 | FunctionQuotaCheckFailed | The quota verification for this function fails. It may be that the configuration of this function exceeds the limit of the site plan. Please check the plan introduction document corresponding to this site. | The current plan does not support the restricted function. Check the feature description of the plan. | |
| 401 | GetTokenFailed | Failed to obtain a token. | Failed to obtain the token. | |
| 400 | GrayConfigExist | A canary configuration already exists under the domain. | The domain name already has other grayscale configurations. | |
| 400 | GrayConfigIsNull | You cannot delete all configurations. At least one configuration must be kept. | You cannot delete all grayscale configurations. At least one configuration must be retained. | |
| 400 | GrayConfigIsNull | You cannot delete all gary configurations. You can clear them by rolling back the simulation environment. | Deleting all rules in the impersonation environment does not clear the configurations on the point of presence (POP). You can rollback the impersonation environment to clear the configurations in the impersonation environment. | |
| 400 | IcpBlack | The domain is on the ICP blacklist. | The domain name is on the MIIT blacklist. | |
| 400 | IllegalOperation | You are not authorized to operate this domain. | The domain name is invalid and cannot be operated on. | |
| 400 | IllegalOperation | You are not authorized to operate this config template. | You do not have the permissions to manage the configuration group. | |
| 400 | IllegalOperation.VersionManagement | The current operation of version management is illegal. | The version management change operation is invalid. | |
| 400 | IllegalOperationDomain | You are not authorized to operate the domain. | You do not have the permissions to manage this domain name. | |
| 403 | IllegalOriginSiteIp | The specified origin site IP address is invalid. | The origin IP address is invalid and cannot be added. | |
| 400 | IllegalSources | The specified origin site information is invalid. | The origin information is invalid. Enter valid information. | |
| 400 | IncompleteInformation | Your information is incomplete. Complete your information before the operation. | Your information is incomplete. Complete the required information first. | |
| 400 | Instance.NotOnline | The specified instance is not online. | The plan instance is not in the active state. | |
| 400 | InstanceBusy | The instance is being modified. | The instance is being reconfigured. | |
| 400 | InstanceNotExist | The current package instance does not exist. | The specified plan instance does not exist. | |
| 500 | Internal Exception | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. Try again later or contact us. | |
| 500 | Internal.ConfigError | An error occurred while configuring the certificate. | The configuration API call failed. | |
| 500 | Internal.CreateCSRError | Failed to create the CSR. | Failed to generate the CSR. | |
| 500 | Internal.EncodeCSRError | Failed to encode the CSR. | Failed to encode the CSR. | |
| 500 | Internal.EncodeKeyError | Failed to encode the private key. | Failed to encode the private key. | |
| 500 | Internal.ForbidError | You cannot modify the configurations when some features of the domain are in a canary deployment. | A feature of this domain name is in canary release and cannot be modified. | |
| 500 | Internal.KeyError | Failed to generate the RSA key. | Failed to generate the RSA private key. | |
| 500 | InternalError | An internal error occurred; please try again later. | An internal error occurred. Try again. If the error persists after multiple retries, submit a ticket. | |
| 400 | InternalError | The request processing has failed due to some unknown error. | An internal error occurred. Try again. If the error persists after multiple retries, submit a ticket. | |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. Try again later or contact us. | |
| 400 | InternalError | An internal exception occurred, please try again later. | An internal exception was triggered. Try again later. | |
| 400 | InternalException | An internal exception occurred, please try again later. | An internal exception was triggered. Try again later. | |
| 400 | InternalOperationError | Internal error in backend service. | An internal error occurred in the backend service. | |
| 400 | InvaildIpAddrList.LengthTooLong | The Specified IpAddrList is too long. | The batch parameter exceeds the limit. A maximum of 20 entries are allowed per query. | |
| 400 | InvaildParameter | The specified parameters are invalid. | The provided parameters are invalid. Check the parameters and try again. | |
| 400 | InvaildParameter | The domain must differ from the origin site. | The domain name and origin cannot be the same. Modify the settings and resubmit. | |
| 400 | InvaildParameter | The specified DomainName is invalid. | The domain name parameter is invalid. Enter a valid domain name. | |
| 400 | InvaildParameter | The specified origin site IP format is invalid. | The domain name parameter is invalid. Enter a valid domain name. | |
| 403 | InvaildParameter | The parameter you provided is invalid. | The input parameter format is invalid. | |
| 400 | InvaildParameterDomainName | The specified DomainName is invalid. | The DomainName parameter is invalid. Enter a valid value. | |
| 400 | InvaildParameterSource | The domain must be different from the origin site. | The domain name and origin cannot be the same. Modify the settings and resubmit. | |
| 400 | Invalid%s.Malformed | The specified ArgValue [%s] is invalid. | The specified ArgValue is not supported. Enter a valid ArgValue. | |
| 400 | Invalid%s.ValueNotSupported | FunctionName [%s] is not supported. | The specified configuration is not supported. Submit a new query. | |
| 400 | Invalid%s.ValueNotSupported | [%s] is not supported. | The specified setting is not supported. | |
| 400 | Invalid.Parameter | The specified parameter is invalid. | The input parameter is invalid. | |
| 400 | Invalid.Value | The request Value is invalid. | The request Value is invalid. | |
| 400 | InvalidAccount.Malformed | The specified account is invalid. | The account input is invalid, for example, the input is empty. | |
| 404 | InvalidAccount.NotFound | The specified account does not exist. | The account does not exist or has not been created. | |
| 404 | InvalidApp.NotFound | Specified app is not found. | The specified app cannot be found. | |
| 400 | InvalidAreaParameter | The specified Area is invalid. | The Area parameter is invalid. | |
| 400 | InvalidArgName | The parameter name does not exist, please check the function interface document. | The specified parameter name does not exist. Refer to the API reference documentation. | |
| 400 | InvalidArgName.ValueNotSupported | %s | The parameter name %s is not supported (%s indicates the specific parameter name). | |
| 400 | InvalidArgValue.Malformed | The specified ArgValue is invalid. | The ArgValue is invalid. Enter a valid value. | |
| 400 | InvalidArgValue.Malformed | %s | %s | |
| 400 | InvalidBaseVersion.Malformed | The specified BaseVersion validation error. | The specified BaseVersion is invalid. | |
| 400 | InvalidCdnType.Malformed | This operation is not supported. | The operation is not supported. | |
| 400 | InvalidCertId.NotFound | The certId does not exist. | The certificate ID does not exist. | |
| 400 | InvalidCertIdentifier.ValueNotSupported | The specified value of parameter CertIdentifier is not valid. | The specified CertIdentifier is invalid. | |
| 400 | InvalidCertificate | The specified certificate format is invalid. | The Certificate format is incorrect. Enter a valid Certificate and try again. | |
| 400 | InvalidCertificate.NotFound | The certificate does not belong to this site. | The certificate does not belong to this site. | |
| 400 | InvalidCertificate.TooLong | The maximum length of the certificate is exceeded. | The Certificate length exceeds the limit. | |
| 400 | InvalidCertificate.TooLong | The maximum lengths of the certificate and the SSLPri are exceeded. | The certificate and private key length exceed the limit. | |
| 400 | InvalidCertName.TooLong | The length of the certificate name cannot exceed 128 characters. | The certificate name cannot exceed 128 characters. | |
| 400 | InvalidChangeEndTime.Malformed | The specified ChangeEndTime is invalid. | The update end time is invalid. | |
| 400 | InvalidChangeStartTime.Malformed | The specified ChangeStartTime is invalid. | The update start time is invalid. | |
| 400 | InvalidCheckUrl.Malformed | The specified CheckUrl is invalid. | The CheckUrl parameter is invalid. | |
| 400 | InvalidComponent | The specified value of parameter BillType is not valid. | The billing type is invalid. Enter a valid billing type. | |
| 400 | InvalidConfigDomain.Malformed | The quota for the config group domain is exceeded. | The number of domain names exceeds the upper limit for a single configuration group. | |
| 400 | InvalidConfigGroup.NotFound | The config group does not exist. | The specified configuration group does not exist. | |
| 400 | InvalidConfigId | The specified configId is invalid. | The configId of the feature is invalid, does not exist, or does not belong to the current instance. | |
| 400 | InvalidConfigId | The input configuration ID: ConfigId it does not exist, query the existing configuration and its valid ConfigId through the ListSiteFunction. | The specified ConfigId does not exist. | |
| 400 | InvalidData.NotFound | The data is not found. | The specified data was not found. | |
| 400 | InvalidDomain.BelongToConfigGroup | The domain is bound to a configuration group. Modify the domain in the configuration group. | This domain name is associated with a configuration group. Modify the configuration through the configuration group. | |
| 500 | InvalidDomain.Configure_failed | Error configuring the domain. | The domain name configuration failed. | |
| 400 | InvalidDomain.Malformed | Only one config group can be attached to a domain. | A domain name can be associated with only one configuration group. | |
| 400 | InvalidDomain.NotExist | The domain you provided is not exist. | The domain name you provided does not exist. | |
| 404 | InvalidDomain.NotFound | The domain does not exist, or it does not belong to you. | The domain name does not exist or does not belong to the current user. Check whether the domain name is spelled correctly, whether it belongs to the current account, and whether it has expired. | |
| 404 | InvalidDomain.NotFound | The specified domain does not exist. | The specified domain name does not exist. | |
| 400 | InvalidDomain.notOnline | The domain is offline. Check the status of the domain and try again later. | The domain name is not online. Check the domain name status and try again later. | |
| 400 | InvalidDomain.NotOnline | Domain should be online status to activate. | The domain name must be in the enabled state before you can activate the configuration group. | |
| 404 | InvalidDomain.Offline | The domain is offline. | The domain name is offline. | |
| 400 | InvalidDomainName | The specified DomainName is invalid. | The DomainName parameter is invalid. Enter a valid value as specified in the request parameter requirements. | |
| 400 | InvalidDomainName | The specified DomainNames is invalid. | No domain name is specified, or the specified domain names exceed the limit. Make sure the domain names comply with the API reference. | |
| 400 | InvalidDomainName.Malformed | The specific DomainName is invalid. | The specified domain name is invalid. | |
| 400 | InvalidDomainName.Malformed | The specified DomainName is invalid. | The domain name format is incorrect. | |
| 400 | InvalidDomainNameLevel | The alicdn.com domain supports a maximum of three levels of domain. | alicdn.com (for wildcard domain names) supports up to third-level domain names. | |
| 400 | InvalidDomainNames.Malformed | The specified DomainNames is invalid. | The specified DomainNames parameter is incorrect. | |
| 400 | InvalidDomainNumber.TooLong | The maximum number of DomainNumber is 50. | The number of domain names cannot exceed 50. | |
| 400 | InvalidDomainSearchType.ValueNotSupported | The specified value of DomainSearchType is invalid. | The DomainSearchType value is incorrect. Enter a valid value. | |
| 400 | InvalidDomainStatus.ValueNotSupported | The specified value of DomainStatus is invalid. | The DomainStatus value is incorrect. Enter a valid value. | |
| 400 | InvalidEndTime.Malformed | The specified EndTime is invalid. | Provide a valid end time format. The date format follows the ISO 8601 standard and uses UTC. Format: yyyy-MM-ddTHH:mm:ssZ. | |
| 400 | InvalidEndTime.Mismatch | The specified EndTime is earlier than the StartTime. | The end time is earlier than the start time. Check the values. | |
| 400 | InvalidEndTimeParameter | The specified end time is invalid. | The end time format is incorrect. | |
| 400 | InvalidExecution.CountFull | The execution count of job is full. | The number of execution plans for the prefetch task is excessive. | |
| 404 | InvalidExecution.ExecutionNotFound | The specified execution is not found. | The execution plan with the specified parameter was not found. | |
| 404 | InvalidExecution.NotFound | The specified execution is not found. | The specified prefetch plan was not found. | |
| 400 | InvalidExtensiveDomain.ValueNotSupported | The specified ExtensiveDomain is not supported. | Wildcard domain names are not supported. | |
| 400 | InvalidExtensiveDomain.ValueNotSupported | Extensive domains are not supported. | Wildcard domain names are not supported. | |
| 400 | InvalidFieldsParameter | The specified Field is invalid. | The Field parameter is invalid. | |
| 400 | InvalidFunction.Malformed | The configuration of the %s function of %s already exists. Only when it is consistent with the current configuration group can you attach it. | The configuration for the YYYY feature of XXXX already exists. You can attach it only when it is consistent with the current configuration group. | |
| 400 | InvalidFunctionName.ValueNotSupported | %s | %s | |
| 400 | InvalidFunctions.Malformed | The specified Functions is invalid. | The configuration is not supported. Enter a valid configuration. | |
| 400 | InvalidHeaderKey.ValueNotSupported | The specified value of parameter HeaderKey is not supported. | The value of HeaderKey is invalid. | |
| 400 | InvalidInstance | The specified instance is invalid. | The specified instance is invalid. | |
| 400 | InvalidIntervalParameter | The specified Interval is invalid. | The interval parameter is invalid. | |
| 400 | InvalidIP.ValueNotSupported | The specified value of parameter IP is not supported. | The IP address format is invalid. | |
| 400 | InvalidIspNameEn.Malformed | The specified IspNameEn is invalid. | The ISP name in English is invalid. Call the DescribeCdnRegionAndIsp operation to obtain valid ISP names and try again. | |
| 400 | InvalidIspParameter | The specified Isp is invalid. | The ISP parameter is invalid. | |
| 400 | InvalidJob.JobCountOfSiteFull | The job count of site is full. | The number of prefetch tasks for the site exceeds the limit. | |
| 404 | InvalidJob.NotFound | The specified job is not found. | The specified prefetch task was not found. | |
| 403 | InvalidKey.ExceedsCapacity | The maximum capacity of a single namespace cannot exceed 1 GB. | The namespace capacity exceeds the limit. The maximum capacity of a single namespace is 1 GB. | |
| 403 | InvalidKey.ExceedsCapacity | The capacity of the namespace exceeds the quota. | The storage capacity exceeds the limit. | |
| 400 | InvalidKey.ExceedsMaximum | The size of the key cannot exceed 512 bytes. | The key length cannot exceed 512 bytes. | |
| 400 | InvalidKey.Malformed | The specified key is invalid. | The key input is invalid. For example, the input is empty. | |
| 404 | InvalidKey.NotFound | The specified key does not exist. | The requested key does not exist. | |
| 406 | InvalidKey.QuotaFull | The maximum number of keys is exceeded. | The number of keys exceeds the quota limit. | |
| 406 | InvalidKey.QuotaFull | The total number of IP exceeds the quota. | The total number of IP addresses exceeds the quota. | |
| 400 | InvalidKey.TooManyKeys | request contains too many keys. | A single request contains too many keys. | |
| 400 | InvalidLimitParameter | The specified Limit is invalid. | The Limit parameter is invalid. | |
| 400 | InvalidLocationNameEn.Malformed | The specified LocationNameEn is not supported. | The specified LocationNameEn is not supported. | |
| 400 | InvalidLocName | The specified LocName is not supported. | The specified LocName value is not supported. | |
| 406 | InvalidNameSpace.Duplicate | The specified namespace already exists. | The namespace already exists. | |
| 400 | InvalidNameSpace.Malformed | The specified namespace is invalid. | The namespace input is invalid. For example, the input is empty. | |
| 404 | InvalidNameSpace.NotFound | The specified namespace does not exist. | The namespace does not exist. | |
| 406 | InvalidNameSpace.QuotaFull | The maximum number of namespaces is exceeded. | The number of namespaces exceeds the quota limit. | |
| 400 | InvalidNodeGroupParameter | The specified nodegroup parameter is invalid. | The Nodegroup parameter is invalid. | |
| 400 | InvalidNodeGroupProductParameter | The specified ngProduct parameter is invalid. | The ngProduct parameter is invalid. | |
| 400 | InvalidObjectPath.ExceedsMaximum | The maximum number of urls is exceeded. | The number of submitted URLs exceeds the maximum limit. | |
| 400 | InvalidObjectPath.Malformed | The specified ObjectPath is invalid. | The ObjectPath is invalid. Enter a valid ObjectPath. | |
| 400 | InvalidObjectPath.Malformed | The specified value of ObjectPath is invalid. | The format of the ObjectPath value is invalid. Example: abc.com/image/1.png. Separate multiple URLs with line breaks (\n or \r\n). | |
| 400 | InvalidObjectType.Malformed | The specified ObjectType is invalid. | The specified ObjectType is not supported. Enter a valid value. | |
| 400 | InvalidObjectType.ValueNotSupported | The specified ObjectType is not supported. | The ObjectType is invalid. Enter a valid ObjectType. | |
| 400 | InvalidOffsetParameter | The specified Page is invalid. | The page parameter is invalid. | |
| 400 | InvalidPageNumber.ValueNotSupported | The specified PageNumber is not supported. | The specified PageNumber is invalid. Enter a valid value. | |
| 400 | InvalidPageNumber.ValueNotSupported | The specified value of PageNumber is not supported. | The page number parameter is invalid. Enter a valid value. | |
| 400 | InvalidPageSize.ValueNotSupported | The specified value of PageSize is invalid. | The PageSize parameter is invalid. Enter a valid value. | |
| 400 | InvalidParameter | The specified parameter is invalid. | The parameter is invalid. | |
| 400 | InvalidParameter | The number of domains reached the version limit. | The number of activated domain names has reached the limit of the current edition. | |
| 400 | InvalidParameter | Domain already exists in high ddos. | The specified domain name is already activated in Anti-DDoS Pro or Anti-DDoS Premium. | |
| 400 | InvalidParameter | The specified parameter is not valid. | Parameter validation failed. | |
| 400 | InvalidParameter | Input parameter specification verification failed. | Input parameter format validation failed. | |
| 400 | InvalidParameter.AddressConflict | The incoming source address conflicts. You cannot have duplicate source addresses in the same origin pool. | The specified addresses of the origin server conflict. Duplicate addresses of the origin server are not allowed within the same origin pool. | |
| 400 | InvalidParameter.appid | The specified parameter appid is not valid. | The appid parameter validation failed. | |
| 400 | InvalidParameter.ArgName | The specified ArgName is invalid. | The specified ArgName is invalid. | |
| 400 | InvalidParameter.ArgValue | The specified ArgValue is invalid. | The specified parameter value validation failed. | |
| 400 | InvalidParameter.ConfigIds | The Specified ConfigIds is invalid. | The specified ConfigIds parameter is invalid. | |
| 400 | InvalidParameter.Configs | The specified configs are invalid. | The specified configuration information is invalid. | |
| 400 | InvalidParameter.Coverage | The specified coverage is invalid. | The specified acceleration region is invalid. | |
| 400 | InvalidParameter.Domains | Specified parameter Domains has duplicate domain names. | The specified Domains parameter contains duplicate domain names. Remove the duplicates and try again. | |
| 400 | InvalidParameter.Domains | The parameter Domains is missing or contains too many domain names. | The number of domain names in the Domains parameter exceeds the quota. Specify fewer domain names and try again. | |
| 400 | InvalidParameter.Domains | The specified parameter Domains is applying the certificate. | A certificate application is already in progress for a domain name in the specified list. Do not submit duplicate requests. | |
| 400 | InvalidParameter.Domains | The specified parameter Domains does not belong to the current site. | The Domains parameter contains domain names that do not belong to the current site. Check the domain names and try again. | |
| 400 | InvalidParameter.FunctionName | The specified FunctionName is invalid. | The specified feature name does not exist. | |
| 400 | InvalidParameter.HealthCheckFailTimes | Specified parameter HealthCheckFailTimes is not valid. | The format of the HealthCheckFailTimes parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckHost | Specified parameter HealthCheckHost is not valid. | The format of the HealthCheckHost parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckHttpCode | Specified parameter HealthCheckHttpCode is not valid. | The format of the HealthCheckHttpCode parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckInterval | Specified parameter HealthCheckInterval is not valid. | The format of the HealthCheckInterval parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckMethod | Specified parameter HealthCheckMethod is not valid. | The format of the HealthCheckMethod parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckPort | Specified parameter HealthCheckPort is not valid. | The format of the HealthCheckPort parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckSuccTimes | Specified parameter HealthCheckSuccTimes is not valid. | The format of the HealthCheckSuccTimes parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckTimeout | Specified parameter HealthCheckTimeout is not valid. | The format of the HealthCheckTimeout parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckType | Specified parameter HealthCheckType is not valid. | The format of the HealthCheckType parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckURI | Specified parameter HealthCheckURI is not valid. | The format of the HealthCheckURI parameter is invalid. | |
| 400 | InvalidParameter.HttpHeaders | The specified HttpHeaders is invalid. Please check the HttpHeaders parameter. Please make the necessary changes and call the interface again. | The HttpHeaders parameter is invalid. Check whether the HttpHeaders parameter is specified. This parameter cannot contain invalid characters such as @ or #. Modify the parameter value and call the operation again. | |
| 400 | InvalidParameter.Image | The specified Image is invalid. Please check the Image parameter and make the necessary modifications and call the interface again. | The Image parameter is invalid. Check the Image parameter. This parameter cannot contain invalid characters such as @, #, or %. Modify the parameter value and call the operation again. | |
| 400 | InvalidParameter.InvalidRecordName | The DNS record name you entered does not meet the required specifications. Please adjust the record name according to the product documentation. | The record name you entered does not meet the requirements. Adjust the record name based on the product documentation. | |
| 400 | InvalidParameter.InvalidRecordName | The record name you entered does not meet the specifications. Change the record name according to the product documentation. | The record name you entered does not meet the requirements. Adjust the record name based on the product documentation. | |
| 400 | InvalidParameter.InvalidSiteEnvironmentName | The specified site environment name is invalid. | The site environment name is invalid. | |
| 400 | InvalidParameter.InvalidVanityNSName | A vanity nameserver must be an absolute domain name. Correct it and try again. | Custom NS names must be fully qualified domain names. Adjust the names and submit again. | |
| 400 | InvalidParameter.InvalidVanityNSNum | Enter 2 to 5 vanity nameservers. Correct them and try again. | You must specify 2 to 5 custom NS names. Adjust the number and submit again. | |
| 400 | InvalidParameter.JobType | The specified job type is invalid. | The prefetch task type parameter is invalid. | |
| 400 | InvalidParameter.LoadBalancerNameInvalid | The load balancer name is invalid. It must be a valid domain name and a subdomain name under the site. | The load balancer name is invalid. The name must be a valid domain name and a subdomain of the site. | |
| 400 | InvalidParameter.Name | The specified Name is invalid. Please check the Name parameter, which must be between 6 and 128 characters. Kindly make the necessary modifications and call the interface again. | The Name parameter is invalid. Check the Name parameter. The value must be 6 to 128 characters in length. Modify the parameter value and call the operation again. | |
| 400 | InvalidParameter.ObjectId | The specified object id is invalid. | The specified object ID is invalid. | |
| 400 | InvalidParameter.OrderKey | The specified OrderKey is invalid. Please check the OrderKey parameter. | The OrderKey parameter is invalid. Check the OrderKey parameter. This parameter cannot contain invalid characters such as @, #, or %. Modify the parameter value and call the operation again. | |
| 400 | InvalidParameter.OrderType | The specified OrderType is invalid. Please check the OrderType parameter. You may not have set it to either Asc or Desc. Please make the necessary changes and call the interface again. | The OrderType parameter is invalid. Check the OrderType parameter. The value must be set to Asc or Desc. Modify the parameter value and call the operation again. | |
| 400 | InvalidParameter.PageNumber | Specified parameter pagenumber is not valid. | The format of the pagenumber parameter is invalid. | |
| 400 | InvalidParameter.Percentage | The Percentage parameter is invalid. Please check the Percentage parameter, which should be in the range of 1-100. Modify it accordingly and call the interface again. | The Percentage parameter is invalid. Check the Percentage parameter. The valid range is 1 to 100. Modify the parameter and call the operation again. | |
| 400 | InvalidParameter.PublishEnv | The specified PublishEnv is invalid. Please check the PublishEnv parameter. It may not be set to either "prod" or "staging." Please make the necessary changes and call the interface again. | The PublishEnv parameter is invalid. Check the PublishEnv parameter. The value may not be set to prod or staging. Modify the parameter and call the operation again. | |
| 400 | InvalidParameter.RecordData | The specified record data is invalid. | The content of the record is invalid. | |
| 400 | InvalidParameter.RecordName | The specified RecordName is invalid. | The record name is a required parameter. Specify a valid record name. | |
| 400 | InvalidParameter.RecordType | The specified record type is invalid. | The record type is invalid. | |
| 400 | InvalidParameter.SiteEnvironmentRuleDuplicate | The specified site environment rule is the same as an existing environment. | The site environment rule is the same as an existing environment. | |
| 400 | InvalidParameter.SiteId | Specified parameter SiteId is not valid. | The specified SiteId parameter is invalid. The site name cannot be retrieved from this ID. | |
| 400 | InvalidParameter.SiteName | The specified site name is invalid. | The site name is invalid. | |
| 400 | InvalidParameter.SiteVersionDescExceedLimit | The specified site version description exceeds the maximum length. | The site version description exceeds the maximum length. | |
| 400 | InvalidParameter.TagValue | The specified TagValue is invalid. | The TagValue parameter is invalid. | |
| 400 | InvalidParameter.TimeRange | The specified time range is invalid. | The time range parameter is invalid. | |
| 400 | InvalidParameter.VanityNSNameDuplicate | The vanity nameservers are duplicated. Please delete it and try again. | Duplicate custom NS names exist. Delete the duplicates and submit again. | |
| 400 | InvalidParameter.VersionId | The specified VersionId is invalid. Please check the VersionId parameter. You may not have entered the parameter or the parameter does not start with ver-string. Please modify it and call the interface again. | The VersionId parameter is invalid. Check the VersionId parameter. You may not have specified this parameter, or the parameter does not start with the ver- prefix. Modify the parameter and call the operation again. | |
| 400 | InvalidParameterAliuid | The specified Aliuid is invalid. | The Aliuid parameter is invalid. | |
| 400 | InvalidParameterArea | The specified Area is invalid. | The Area parameter is invalid. | |
| 400 | InvalidParameterBillType | The specified BillType is invalid. | The BillType parameter is invalid. | |
| 400 | InvalidParameterDimension | The specified Dimension is invalid. | The Dimension parameter is invalid. | |
| 400 | InvalidParameterEndTime | The specified EndTime is invalid. | The EndTime parameter is invalid. | |
| 400 | InvalidParameterField | The specified Field is invalid. | The Field parameter is invalid. | |
| 400 | InvalidParameterInterval | The specified Interval is invalid. | The Interval parameter is invalid. | |
| 400 | InvalidParameterOperator | The specified Operator is invalid. | The Operator parameter is invalid. | |
| 400 | InvalidParameterProduct | The specified Product is invalid. | The Product parameter is invalid. | |
| 400 | InvalidParameters | The specified parameters are invalid. | The parameter is invalid. | |
| 400 | InvalidParameterStartTime | The specified StartTime is invalid. | The StartTime parameter is invalid. | |
| 400 | InvalidParameterTaskId | The specified TaskId is invalid. | The TaskId parameter is invalid. | |
| 400 | InvalidParameterType | The specified Type is invalid. | The Type parameter is invalid. Verify the value and try again. | |
| 400 | InvalidProductParameter | The specified Product is invalid. | The Product parameter is invalid. | |
| 400 | InvalidRegionId.Malformed | The specified RegionId is invalid. | The RegionId parameter is invalid. | |
| 400 | InvalidRequestDomain | Failed to get the domain name. | Failed to retrieve the domain name. | |
| 400 | InvalidRequestHeader | The request header information is invalid. | The request header format is invalid. | |
| 400 | InvalidRequestHeader | The request header information JSON data parsing failed. | Failed to parse the JSON data in the request header. | |
| 400 | InvalidRequestHeader | The JSON encoding of the request header information failed. | Failed to encode the request header in JSON format. | |
| 400 | InvalidRequestJson | The request for JSON data parsing failed. | Failed to parse the JSON data in the request. | |
| 400 | InvalidRequestMethod | The request method is not supported. | The request method is not supported. | |
| 400 | InvalidRequestMethod | Failed to get method. | Failed to retrieve the method. | |
| 400 | InvalidRequestProtocol | A protocol type error occurred. | The protocol type is invalid. | |
| 400 | InvalidRequestProtocol | Failed to get the protocol. | Failed to retrieve the protocol. | |
| 400 | InvalidRequestProxy | The regular matching IP address is not matched. | The IP address does not match in the regular matching. | |
| 400 | InvalidRequestProxy | An error occurred while matching the IP address. | An error occurred while matching the IP address. | |
| 400 | InvalidRequestUri | Failed to get URI. | Failed to retrieve the URI. | |
| 400 | InvalidResourceGroupId.Malformed | The specified ResourceGroupId is invalid. | The ResourceGroupId is invalid. Enter a valid ResourceGroupId. | |
| 404 | InvalidResourceId.NotFound | The specified resource does not exist or is released. | The resource does not exist or has been released. | |
| 400 | InvalidResponseBody | Failed to read the response body. | Failed to read the response body. | |
| 400 | InvalidResponseBody | The response body failed to close. | Failed to close the response body. | |
| 400 | InvalidResponseGetResp | The response from the request is null. | The response to the request is empty. | |
| 400 | InvalidResponseGetResp | The response from the request failed. | The response to the request failed. | |
| 400 | InvalidResponseHeader | JSON encoding of the response header failed. | Failed to JSON-encode the response header. | |
| 400 | InvalidRule.Malformed | %s | %s | |
| 400 | InvalidSchemeParameter | The specified Scheme parameter is invalid. | The Scheme parameter is invalid. | |
| 400 | InvalidScope.Malformed | The specified Scope is invalid. | The Scope is invalid. Enter a valid Scope and try again. | |
| 400 | InvalidSiteICP | The ICP of site is invalid. | The site ICP is invalid. | |
| 400 | InvalidSiteName | Invalid siteName value. | The site parameter is invalid. | |
| 400 | InvalidSortByParameter | The specified Ordering is invalid. | The Ordering parameter is invalid. | |
| 400 | InvalidSource.Content.Malformed | The specified Source Content is invalid. | The origin server information is invalid. Enter valid information. | |
| 400 | InvalidSource.Port.Malformed | The source port is empty, or it is outside the range 0-65535. | The origin server port is empty or not within the range of 0 to 65535. | |
| 400 | InvalidSource.Priority.Malformed | The specified Source Priority is invalid. | The Source Priority format is invalid. Enter the correct format. | |
| 400 | InvalidSource.Type.Malformed | The specified Source Type is invalid. | The Source Type format is invalid. Enter a valid value. | |
| 400 | InvalidSourceParameter | The specified source is invalid. | The Source parameter is invalid. | |
| 400 | InvalidSources.Malformed | The specified Sources is invalid. | The Sources parameter format is invalid. The value can be IP addresses or a domain name. You can specify up to 20 IP addresses separated by commas, or specify only one domain name. You cannot specify both IP addresses and a domain name. | |
| 400 | InvalidSources.OverLimit | The maximum number of back-to-origin IP addresses is exceeded. | The number of back-to-origin IP addresses exceeds the limit. | |
| 400 | InvalidSplitByParameter | The specified splitType parameter is invalid. | The specified group key is invalid, or the parameter corresponding to the group key is not specified. | |
| 400 | InvalidSSLPri | The specified SSLPri is invalid. | The SSLPri is invalid. Enter a valid SSLPri. | |
| 400 | InvalidSSLProtocol.ValueNotSupported | The specified SSLProtocol is invalid. | The HTTPS certificate switch value is not supported. Enter on or off. | |
| 400 | InvalidSSLPub | The specified SSLPub is invalid. | The SSLPub is invalid. Enter a valid value. | |
| 400 | InvalidStartTime.Malformed | The specified StartTime parameter is invalid. | Enter a valid start time format. The date format follows the ISO 8601 standard and uses UTC time in the format: yyyy-MM-ddTHH:mm:ssZ. | |
| 400 | InvalidStartTime.ValueNotSupported | The specified StartTime is invalid. | The start time is not supported. Enter a valid start time. | |
| 400 | InvalidStartTime.ValueNotSupported | The StartTime cannot exceed 31 days before the current time. | You cannot query data from more than 31 days ago. | |
| 400 | InvalidStartTimeParameter | The specified start time is invalid. | The start time parameter is invalid. | |
| 400 | InvalidStationParameter | The specified Station is invalid. | The station parameter is invalid. | |
| 400 | InvalidStatus.ResourceGroup | The current status of the resource group does not support this operation. | The current status of the resource group does not allow this operation. | |
| 400 | InvalidStatus.ValueNotSupported | The specified Status is not supported. | The Status is invalid. Enter a valid Status. | |
| 400 | InvalidTargetParameter | The specified parameter Target is invalid | The specified Target parameter is invalid. Refer to the API reference for details. | |
| 400 | InvalidTaskId | The maximum number of taskIds is 10. | The number of taskIds cannot exceed 10. | |
| 400 | InvalidTaskId.Malformed | The specified TaskId is invalid. | The TaskId is invalid. Enter a valid TaskId. | |
| 400 | InvalidTime | The query time cannot exceed the last 3 days. | The query time cannot exceed the last 3 days. | |
| 400 | InvalidTime.Malformed | Specified StartTime or EndTime is malformed. | The start time or end time format is invalid. The date format follows the ISO 8601 standard and uses UTC+0 time in the format: yyyy-MM-ddTHH:mm:ssZ. | |
| 400 | InvalidTimePointParameter | The specified TimePoint is invalid. | The TimePoint parameter is invalid. | |
| 400 | InvalidTimeRange | The time span between the StartTime and the EndTime cannot exceed 31 days. | The difference between EndTime and StartTime cannot exceed 31 days. | |
| 400 | InvalidTimeSpan | The time span exceeds the limit. | The time span exceeds the limit. Refer to the API reference and configure a valid query time span. | |
| 400 | InvalidTypeContent.Mismatch | The specified source type does not match the specified source content. | The origin server type does not match the origin server. Enter valid values. | |
| 403 | InvalidUid.PermissionDenied | The specified uid does not have permission to operate on the resource. | The specified Alibaba Cloud UID does not have permission to operate on the resource. | |
| 400 | InvalidUserParameter | The specified User is invalid. | Invalid user parameter. | |
| 400 | InvalidValue.ExceedsMaximum | The size of the value cannot exceed 2,000,000 bytes. | The value length cannot exceed 2,000,000 bytes. | |
| 400 | InvalidValue.Malformed | Country must only contain 2 characters. | The Country parameter must be two characters. | |
| 400 | InvalidVersion.Malformed | The version has been activated. | The version is already activated. | |
| 400 | InvalidVersion.Malformed | This version is active and cannot be deleted. | The version is active and cannot be deleted. | |
| 400 | InvalidVersion.Malformed | You must deactivate the active version of this configuration group before deleting it. | Deactivate the active version in the configuration group before deleting the configuration group. | |
| 400 | InvalidVersion.Malformed | This version is active and cannot be modified. | The version is active and cannot be set. | |
| 400 | InvalidVersion.NotFound | The version does not exist. | The specified version number does not exist. | |
| 400 | IspBlack | The domain is on the ISP blacklist. | The domain name is on the Alibaba Cloud blacklist. | |
| 400 | Key.Malformed | The specified Key format is invalid. | The Key parameter format is invalid. | |
| 403 | List.BeingBound | The specified list is being bound. | The specified list is bound to one or more protection rules. | |
| 403 | List.Name.AlreadyExist | The specified list name already exists. | The specified list name already exists. | |
| 403 | List.NotExist | The specified list does not exist. | The specified list does not exist. | |
| 400 | lllegalOperationDomain | The domain name cannot be added because it contains illegal content | The domain name contains content violations and cannot be added. | |
| 400 | LoadBalancerHealthDetectionIntervalCheckFailed | The configured load balancer health detection interval exceeds the quota range allowed by the plan. Please revise the interval within the range or upgrade the plan and try again. | The health check interval configured for the load balancer exceeds the quota allowed by your plan. Adjust the interval to a value within the allowed range or upgrade your plan, and then retry. | |
| 400 | LoadBalancerHealthDetectionQuotaCheckFailed | Your current plan does not allow you to configure the load balancer's health detection. Upgrade the plan and try again. | Your current plan does not support configuring health checks for the load balancer. Upgrade your plan and retry. | |
| 400 | LoadBalancerNameConflict | LoadBalancer name conflict. | The load balancer name conflicts with an existing load balancer name or an origin pool record name. Load balancer names must be unique. | |
| 400 | LoadBalancerNotExist | The specified load balancer not exist. | The load balancer does not exist. | |
| 400 | LoadBalancerNumberExceedQuotaLimit | The number of load balancers you have added has reached the limit of the plan quota. Please delete the unused load balancers or upgrade the plan and try again. | The number of load balancers has reached the quota limit of your plan. Delete unused load balancers or upgrade your plan, and then retry. | |
| 400 | LoadBalancerPolicyCheckFailed | Your current plan does not support the load balancer scheduling policy. Upgrade the plan and try again. | Your current plan does not support this load balancer scheduling policy. Upgrade your plan and retry. | |
| 400 | LoadBalancerQuotaCheckFailed | Load balancer enable quota check failed. | Your current plan does not support load balancer features. Upgrade your plan to use these features. | |
| 400 | LoadBalancerRuleQuotaCheckFailed | Your current plan does not support configuring load balancer custom rules, or the load balancer rules you have added exceed the plan quota limit. Please upgrade the plan or delete the rules that are no longer in use and try again. | Your current plan does not support configuring custom rules for the load balancer, or the number of load balancer rules has exceeded the quota limit of your plan. Upgrade your plan or delete unused rules, and then retry. | |
| 400 | LockFailed | Failed to acquire the lock. This resource should be in operation by other requests. You need to wait for a while until the previous request is processed. | Failed to acquire the lock. The resource is being operated on by another request. Wait for the previous request to complete and try again. | |
| 404 | LogNotFound | Log not found. | No logs found. | |
| 403 | LogserviceNotFound | Log Service has not been activated. | The real-time log service is not activated. | |
| 400 | LogserviceServiceNotFound | Log Service has not been activated. | The real-time log service is not activated. | |
| 404 | LogstoreNotExist | Logstore does not exist. | The Logstore does not exist. | |
| 403 | ManagedRulesGroup.BeingBound | The specified WAF managed rules group is being bound. | The specified WAF managed rule group is bound to one or more protection rules. | |
| 403 | ManagedRulesGroup.Name.Invalid | The specified WAF managed rules group name is invalid. | The specified WAF managed rule group name is invalid. | |
| 403 | ManagedRulesGroup.NotExist | The specified WAF managed rules group does not exist. | The specified WAF managed rule group does not exist. | |
| 403 | Match.Malformed | The specified parameter match is malformed or does not adhere to the required format. | The specified Match parameter format is invalid or does not conform to the required format. Check the rule configuration for syntax errors or structural inconsistencies, and correct them to match the expected configuration schema. | |
| 400 | MissingConfigId | ConfigId is mandatory for this action. | The required parameter ConfigId is missing. Check whether this parameter is specified in the request and try again. | |
| 400 | MissingDomainName | The domainName parameter is required. | Specify the domain name parameter. | |
| 400 | MissingOssUrl | Oss url is mandatory for this action. | The OSS URL for downloading the prefetch file is missing. | |
| 400 | MissingParameter | Certain required parameters are missing. | Missing parameter. | |
| 400 | MissingParameter | You must specify ArgValue. | Missing parameter. | |
| 400 | MissingParameter | The specified ArgName is required for this function. | A required parameter is missing when configuring the specified feature. | |
| 400 | MissingParameter | The input parameter Record that is mandatory for processing this request is not supplied. | The required parameter Record is missing. Check whether this parameter is specified in the request and try again. | |
| 400 | MissingParameter%s | The specified value of ArgName %s is missing. | Missing parameter. | |
| 400 | MissingParameter.ObjectType | The ObjectType parameter is required if DomainName or ObjectType is specified. | Specify the ObjectType parameter. | |
| 400 | MissingSiteId | SiteId is mandatory for this action. | The required parameter SiteId is missing. Check whether this parameter is specified in the request and try again. | |
| 400 | MissingSource.Content | The Source Content must be specified. | Source Content is required. Specify this parameter and try again. | |
| 400 | MissingSource.Type | The Source Type must be specified. | Source Type is required. Specify this parameter and try again. | |
| 400 | MissingStartTimeParameter | The StartTime is required. | The start time cannot be empty. | |
| 400 | MissingTimeParameter | The StartTime and EndTime must be both specified. | Specify both the start time and end time. | |
| 400 | MissingUrlList | UrlList is mandatory for this action. | The URL list parameter for prefetch is missing. | |
| 400 | MissParameter | The specified parameter is missing | A required parameter is missing. | |
| 400 | MissParameter.TagOrResourceId | Either Tag or ResourceId must be specified. | Tag and ResourceId cannot both be empty. | |
| 400 | MonitorExpectedBodyInvalid | The incoming monitor expected return body is illegal, the length cannot be greater than 102400. | The expected response body of the monitor is invalid. The length cannot exceed 102400. | |
| 400 | MonitorExpectedCodesInvalid | The incoming monitor expected return code is invalid, the incoming return code cannot exceed 10, and the length of a single return code is not less than 3, not more than 4, such as: 200,301,3xx,8000,88xx. | The expected response codes of the monitor are invalid. You can specify up to 10 response codes. Each response code must be 3 to 4 characters in length, such as 200, 301, 3xx, 8000, or 88xx. | |
| 400 | MonitorHeaderInvalid | The incoming monitor carries illegal request headers. The number of request headers cannot exceed 10. The corresponding value of a single request header must be greater than 0 and less than 10. The request header User-Agent cannot be used for specific internal scenarios. The length of the overall request header and value cannot exceed 6000. | The request headers of the monitor are invalid. You can specify up to 10 request headers. Each request header must have 1 to 9 values. The User-Agent request header cannot be used because it is reserved for internal scenarios. The total length of all request headers and values cannot exceed 6000. | |
| 400 | MonitorMethodNotSupport | The incoming monitor request method is not supported, only the following methods are supported: GET/HEAD. | The request method of the monitor is not supported. Only the following methods are supported: GET and HEAD. | |
| 400 | MonitorPathNotSupport | The input monitor path is not supported. When the monitor type is HTTP or HTTPS, the monitor path cannot be empty and the longest path cannot exceed 1024. | The monitor path is not supported. When the monitor type is HTTP or HTTPS, the path cannot be empty and cannot exceed 1024 characters in length. | |
| 400 | MonitorPortNotSupport | The incoming monitor listening port is not supported. The port value range is [1,65535]. | The monitor port is not supported. Valid values: 1 to 65535. | |
| 400 | MonitorRetriesInvalid | The input monitor retries parameter is not supported. The range of supported retries is [0-5]. | The retry count parameter of the monitor is not supported. Valid values: 0 to 5. | |
| 400 | MonitorTimeoutInvalid | The monitor timeout passed in is out of range. The following range is supported:[1-10]. | The timeout value of the monitor is out of range. Valid values: 1 to 10. | |
| 400 | MonitorTypeNotSupport | The incoming monitor type is not supported. The monitor only supports the following types: off/HTTP/HTTPS/TCP/UDP/ICMP Ping/SMTP. | The monitor type is not supported. Valid values: off, HTTP, HTTPS, TCP, UDP, ICMP Ping, and SMTP. | |
| 400 | NameAlreadyExist | The subscription name already exists. | The subscription task name already exists. | |
| 400 | NameAlreadyExists | The name already exists. | The name already exists. | |
| 400 | NestedRuleQuotaCheckFailed | The nesting level of rules allowed by the plan failed to be verified. Please modify the nesting level of rules or upgrade the plan. | The number of nested sub-conditions in the rule exceeds the plan limit. Check the plan description and upgrade your plan. | |
| 400 | NoHttpsDomain | Your account does not have any HTTPS domain. | Your account does not have HTTPS domain names. | |
| 400 | NoHttpsDomain | Your account does not have https domain. | Your account does not have HTTPS domain names. | |
| 400 | NoPermission | You do not have permission to access or operate on the current resource. | You do not have the permissions to access or perform operations on the current resource. | |
| 400 | NoPermission | There is no permission to call this interface for the time being. If you need to call it, please submit a work order for consultation. | You do not have the permissions to call this operation. To request access, submit a ticket. | |
| 400 | NoPermission | Permission denied. | Access denied. | |
| 400 | NoRealNameAuthentication | Real name authentication is needed. | Your account has not completed real-name verification. | |
| 404 | NoResource | The required port has no resources, please submit a ticket. | No resources are available for the required port. Submit a ticket. | |
| 400 | NotFoundCertList | The certList is null. | The certificate list is empty. | |
| 400 | NotInternationRealIdentity | Real-name registration is required for services offered in Mainland China. | In accordance with the laws of the People's Republic of China, users who purchase and use information services within China must complete real-name verification. | |
| 400 | OperationDenied | Error performing verification. | Authentication failed. | |
| 403 | OperationDenied | You are not authorized to perform this operation. | You do not have the required permissions. Check your permissions in Resource Access Management (RAM). | |
| 403 | OperationDenied | Your UID and BID do not match. | Your UID and BID do not match. | |
| 400 | OperationDenied.DefaultSiteEnvironmentUneditable | The rule of the default environment is not allowed to be modified. | Rules in the default environment cannot be modified. | |
| 400 | OperationDenied.VanityNSUnavailable | Only sites in NS access type can use vanity nameservers. Convert your site to NS access type and try again. | Custom nameservers are available only for sites that use NS-based access. Change the access mode of your site and try again. | |
| 403 | OperationDeniedAccount | You are not authorized to perform this operation. | You do not have the permissions to perform this operation. | |
| 403 | OperationDeniedUid | Your UID and BID do not match. | Your UID and BID do not match. | |
| 400 | Order.InstanceHasUnpaidOrder | The specified instance has an unpaid order. | The instance has unpaid orders. | |
| 400 | OriginPoolNameConflict | Origin pool name conflict. | The origin pool name conflicts with an existing name. The origin pool name must be unique within the same site, and the record name cannot be the same as a load balancer name. | |
| 400 | OriginPoolNotExist | The origin pool id passed in does not exist or does not belong to this user or site. | The specified origin pool ID does not exist or does not belong to this user and site. | |
| 403 | Page.BeingBound | The specified page is being bound. | The specified custom response page is bound to one or more protection rules. | |
| 403 | Page.NotExist | The specified page does not exist. | The specified custom response page does not exist. | |
| 400 | ParameterAlreadyExist | The entered parameter already exists. | The specified input parameter already exists. | |
| 400 | ParameterNotExist | The entered parameter does not exist. | The specified input parameter does not exist. | |
| 400 | ParamNameError | parameter name error | The Name parameter is invalid. | |
| 400 | Policy.DefaultExisted | The default policy is existed in specified defense scene. | A default policy already exists for the specified protection scenario. | |
| 400 | Policy.DeleteForbidden | The specified policy is forbidden to delete. | The specified policy cannot be deleted. | |
| 400 | Policy.NotExist | The specified policy does not exist. | The specified mitigation policy does not exist. | |
| 400 | PolicyName.AlreadyExists | The specified policy name already exists. | The specified policy name already exists. | |
| 400 | PolicyNameExist | The policy name already exists. | The policy name already exists. | |
| 400 | PolicyNotExist | The policy does not exist. | The policy does not exist. | |
| 400 | PoolNumberExceedQuotaLimit | The number of origin pool you have added has reached the upper limit of the plan quota. Please delete the origin pool that is no longer in use or upgrade the plan and try again. | The number of origin pools has reached the quota limit of your plan. Delete unused origin pools or upgrade your plan, and then try again. | |
| 400 | PoolReferenceExist | The origin pool has references and cannot be deleted. | The origin pool is referenced and cannot be deleted. | |
| 400 | PortConfiguring | Some of the ports you configured are not ready. | Some of the configured ports are not ready. | |
| 400 | PortNotAllowed | The configured ports contain a port that is not allowed to be used. | The configured port numbers contain ports that are not allowed. | |
| 400 | PreloadQueueFull | The warming queue is full; please try again later. | The number of URLs being prefetched for the domain name has reached the upper limit. Try again later. | |
| 500 | PrivateKeyError | The content of the certificate is invalid. | The certificate content is invalid. | |
| 200 | ProjectExist | sls project belong to other user. | The SLS project already belongs to another user. | |
| 404 | ProjectNotExist | The project does not exist. | The corresponding project information was not found. | |
| 400 | ProjectNotFound | The project provided does not belong to you. | The project does not exist or does not belong to the current user. | |
| 500 | QueryDBError | An internal exception occurred when query data, please try again later. | An internal error occurred while querying data. Try again later. | |
| 500 | QueryLog.Timeout | Query Log System Timeout. | The query to the standard log system timed out. Try again later. | |
| 400 | QuotaCheckFailed.CustomNS | The current plan does not allow custom NS. | Custom NS is not allowed for the current plan. | |
| 400 | QuotaCheckFailed.Function | The function is not allowed to be used in the current plan, or the function count has exceeded quota limit. | This feature is not allowed for the current plan, or the feature has exceeded the plan quota. | |
| 400 | QuotaCheckFailed.FunctionArg | This function arguments is not available in the current package, or the quantity has exceeded the quota limit. | The feature parameter is not available for the current plan, or the quantity has exceeded the quota limit. | |
| 400 | QuotaCheckFailed.Regex | The current plan does not allow regular expressions in rules. | Regular expressions are not allowed in rules for the current plan. | |
| 400 | QuotaCheckFailed.VersionManagement | The current plan's quota of version management is insufficient. Please try to upgrade the plan. | The version management quota of the current plan is insufficient. Upgrade your plan. | |
| 400 | QuotaExceed.NestedConditional | The number of nested conditions for the rule exceeds the quota limit. | The number of nested conditions in the rule exceeds the quota limit. | |
| 400 | QuotaExceed.RecordCount | The number of records exceeds the quota limit. | The number of records exceeds the plan quota limit. | |
| 400 | QuotaExceed.SiteCount | The number of site exceeds the quota limit. | The number of sites exceeds the quota limit. | |
| 400 | QuotaExceed.UploadHttpCert | The number of self-upload certificates exceeds the quota limit. | The number of self-uploaded certificates exceeds the quota limit. | |
| 400 | QuotaExceed.WildCardRecord | The number of wild card records exceeds the quota limit. | The number of wildcard records exceeds the quota limit. | |
| 403 | QuotaExceeded | The quota is exceeded. | The quota limit has been exceeded. | |
| 400 | QuotaExceeded.Block | Your block attempts have exceeded the daily limit. | The number of blocks has exceeded the daily limit. | |
| 400 | QuotaExceeded.Preload | Your refresh attempts have exceeded the daily limit. | The daily refresh and prefetch limit has been exceeded. | |
| 400 | QuotaExceeded.Refresh | Your refresh attempts have exceeded the daily limit. | The daily refresh limit has been exceeded. The refresh quota for today is exhausted. You can query the number of refreshes for today through the refresh API. | |
| 400 | QuotaNotExist | Quota does not exist. | The plan quota item does not exist. | |
| 400 | QuotaPerMinuteExceeded.Preload | You have exceeded the prescribed preload limits per minute. | The prefetch frequency per minute has exceeded the upper limit. | |
| 400 | QuotaPerMinuteExceeded.Refresh | You tried to refresh too frequently; please try again later. | Refreshes are too frequent. Try again later. | |
| 403 | RealTimeLog.BucketRegionError | Realtime log oss bucket region error. | The OSS bucket region is incorrectly selected. | |
| 403 | RealTimeLog.KafkaBrokersExceedError | Realtime log kafka brokers exceed error. | The number of real-time log Kafka broker servers exceeds the upper limit (maximum: 50). | |
| 403 | RealTimeLog.KafkaConfigError | Realtime log kafka config error. | The real-time log Kafka delivery configuration is invalid. | |
| 403 | RealTimeLog.NameCheckFail | Real-time log name field validity check failed. | The real-time log configuration field contains invalid characters. Remove the invalid characters and try again. Allowed characters include digits, letters, underscores (_), and spaces ( ). | |
| 403 | RealTimeLog.OssBucketQueryError | Realtime log oss bucket query error. | An error occurred when querying the OSS bucket. | |
| 403 | RealTimeLog.OssRoleCheckError | Realtime log oss role does not exist. | The authorization role for real-time log OSS delivery does not exist. | |
| 400 | RealTimeLog.ProjectExistError | Realtime-log project name already exist. | The real-time log project name already exists. | |
| 403 | RealTimeLog.RegexpCheckFail | Realtime log Regexp check fail. | The regex matching check for the real-time log configuration field failed. | |
| 403 | RealTimeLog.S3EndpointInvalidError | Realtime log s3 endpoint invalid. | The endpoint configuration for real-time log S3 delivery is invalid. | |
| 403 | RealTimeLog.SlrRoleCheckError | Realtime log SLR role check error. | The service-linked role (SLR) permissions for real-time logs are invalid. | |
| 403 | RealTimeLog.SlsClientError | Realtime log sls client init error. | An error occurred with the real-time log SLS delivery client. | |
| 403 | RealTimeLog.SlsEndpointError | Realtime log sls config endpoint error. | The endpoint for real-time log SLS delivery is invalid. | |
| 403 | RealTimeLog.SlsLogstoreQueryError | Realtime Log sls logstore query error. | Failed to query the SLS Logstore. | |
| 403 | RealTimeLog.SlsNotOpen | Aliyun Log service not open. | Alibaba Cloud Log Service is not activated. | |
| 403 | RealTimeLog.SlsProjectExistError | log sls project exist error. | The SLS project already exists. | |
| 409 | RealTimeLog.SomeDomainFailed | Some domain failed to process. | Some domain names failed to be processed. | |
| 403 | RealTimeLog.StatusQuotaError | Realtime log service quota limit error. | The real-time log plan quota is insufficient. | |
| 400 | RealtimeLogProjectExistError | Realtime-log project name already exist. | The real-time log project name already exists. | |
| 403 | Record.AlreadyExist | The record to be added already exists or conflicts. | The record to be added already exists or conflicts with an existing record. | |
| 400 | Record.Conflict | The specified record conflicts with an existing record. | The record conflicts with an existing record. | |
| 404 | Record.NotFound | The record does not exist. | The record does not exist. | |
| 400 | Record.Reserved | The specified record is reserved. | The record is in protection status. | |
| 400 | Record.ServiceBusy | The specified record is being configured, please try again later. | The record is being configured. Try again later. | |
| 400 | RecordCheckNotAvailable | The ICP filing interface is unavailable. Please try again later. | The ICP filing API is unavailable. Try again later. | |
| 400 | RegionNoResource | No resource is available in the specified region. | No resources are available in the selected region. | |
| 400 | RegionNoResource | Resource allocation failed. Please submit a work order to contact customer service. | Resource allocation failed. Submit a ticket to contact customer service. | |
| 400 | RelatedRecordNumberExceedQuotaLimit | related record number exceeds the quota limit. | The number of records associated with the routine exceeds the quota limit. | |
| 400 | RelatedRouteNumberExceedQuotaLimit | related route number exceeds the quota limit. | The number of associated routes exceeds the quota limit. | |
| 400 | RelatedSiteNumberExceedQuotaLimit | The number of Routine associated site sites exceeds the quota limit. | The number of sites associated with the routine exceeds the quota limit. | |
| 400 | RequestNotSupported | The request is not supported for unactivated site. | Inactive sites do not support free certificate applications. Activate the site first. | |
| 400 | Resource.NotExist | The resource does not exist. | The resource does not exist. | |
| 400 | ResourceIdIsInvalid | The number of ResourceId exceeds 50. | The number of ResourceId values exceeds 50. | |
| 400 | ResourceNotExist | The specified domain does not exist. | The specified resource does not exist. | |
| 403 | ResourceOverload | Resources are overloaded. Please try again later. | The resource load is too high. Try again later. | |
| 400 | RetErrorSourceCircle | Error configuring the source. CDN already contains the domain. Please change the source. | The origin server is already a CDN domain name. Change it to a different origin server. | |
| 400 | RoutineAlreadyExist | The Routine name you entered already exists. | The specified routine name already exists. | |
| 400 | RoutineNotExist | The Routine name entered does not exist. | The specified routine name does not exist. | |
| 400 | RoutineNumberExceedQuotaLimit | routine number exceeds the quota limit. | The number of routines exceeds the quota limit. | |
| 400 | RoutineUserServiceStatusHalt | The user is in halt state, can not perform update operations. | The user is in a suspended state and cannot perform update operations. | |
| 403 | Rule.Config.Malformed | The specified rule configuration is malformed or does not adhere to the required format. | The specified rule configuration format is invalid or does not conform to the required format. Check the rule configuration for syntax errors or structural inconsistencies and correct them to match the expected configuration schema. | |
| 403 | Rule.Config.Noncompliance | The specified rule configuration does not meet the established compliance criteria. | The specified rule configuration does not meet the established compliance standards. Check the rule settings for any discrepancies or violations of the expected standards and make the necessary adjustments to ensure all rules are properly validated. | |
| 403 | Rule.Name.AlreadyExists | The specified rule name already exists and cannot be duplicated within the system's configuration. | The specified rule name already exists in the system configuration and cannot be reused. Choose a unique rule name that does not conflict with existing rule names, or consider renaming the existing rule if necessary, to eliminate any ambiguity and ensure the uniqueness of each rule identifier. | |
| 400 | Rule.Name.CantBeModified | The specified rule name can not be modified. | The specified rule name cannot be modified. | |
| 400 | Rule.NotExist | The specified rule does not exist. | The specified rule does not exist in the current context or system configuration. Verify that the rule identifier exists and that it has been correctly defined or implemented. | |
| 403 | Rule.Position.Invalid | The specified rule position is invalid or falls outside the acceptable range. | The specified rule position is invalid or out of the acceptable range. Verify the rule position parameter and make appropriate corrections to ensure compliance with the established boundaries or sequence requirements. | |
| 400 | Rule.QuantityOverflow | Rules are overflowed quantity in specified policy. | The number of rules in the specified policy exceeds the quota. | |
| 400 | RuleCompileError | Compilation failed because of incorrect rule information. | The rule information is incorrect. Compilation failed. | |
| 400 | RuleConfigs.Malformed | The specified RuleConfigs format is invalid. | The format of the specified RuleConfigs parameter is invalid. | |
| 400 | RuleName.AlreadyExists | Rule name already exists in specified policy. | The rule name already exists in the specified policy. | |
| 400 | RuleRegexQuotaCheckFailed | When configuring rules, rules with regular expressions are not allowed in this plan. Please check the relevant documentation of the plan or upgrade the plan. | Your current plan does not support configuring rule engine rules that contain regular expressions. Check the plan description and upgrade your plan. | |
| 403 | Ruleset.Name.AlreadyExists | The specified ruleset name already exists within the system's rule management infrastructure. | The specified ruleset name already exists in the rule management architecture of the system. Choose a unique alternative name to avoid duplication and potential conflicts with existing rulesets. If you are renaming an existing ruleset, ensure that the new name is unique and does not conflict with identifiers of other established rulesets. | |
| 403 | Ruleset.NotExist | The specified ruleset does not exist or has not been registered within the current system configuration. | The specified ruleset does not exist or has not been registered in the current system configuration. Verify that the ruleset identifier is correct and points to a ruleset that has been correctly defined and maintained in the ruleset registry of the system. If the ruleset is a new entity, ensure that the necessary steps for its creation and registration have been successfully completed so that it is available. | |
| 400 | ScenePolicyQuotaExceedLimit | Scene Policy Quota Exceeded. | The number of scenario-specific policy configurations exceeds the quota. | |
| 400 | Schedule.ChangeFail | Failed to change the accelerated area for the domain. | Failed to switch the scheduling region for the domain name. | |
| 400 | Schedule.NotFound | This domain does not have any available CDN resources in the accelerated area. | No available scheduling domain resources exist for the domain name. | |
| 403 | ServiceBusy | The specified domain is being configured; please try again later. | The domain name is being configured. Try again later. | |
| 400 | ServiceInvokeFailed | Failed to invoke service. | Failed to call the internal service. | |
| 400 | ServiceInvokeFailed | The call to the internal service failed. The engineer is resolving the problem. Please wait a moment before trying, or contact customer service for details. | Failed to call the service. Try again later or contact customer service for details. | |
| 400 | ServiceNotOpen | The edge routine service is not enabled. | The edge function service has not been activated. | |
| 503 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | The service is unavailable. | |
| 400 | SetDomainCertificate.ParameterError | The specified parameters are invalid. | The parameter is invalid. Specify valid parameters and try again. | |
| 400 | SingleRequest.OverLimit | A maximum of 100 URLs are supported for each request. | A maximum of 100 URLs can be submitted at a time. | |
| 400 | Site.AlreadyExist | The specified site already exists. | The site already exists. | |
| 400 | Site.Conflict | The specified site conflicts with an existing site. | The site conflicts with an existing site. | |
| 400 | Site.InvalidCoverage | The specified coverage is invalid, only the coverages of the plan instance are available. | The specified acceleration region is invalid. You can switch only to an acceleration region supported by the plan instance. | |
| 403 | Site.NotExist | The specified site does not exist or is not currently recognized by the system. | The specified site does not exist or is not currently recognized by the system. Verify that the site identifier is accurate and matches a site that is defined, currently active, and accessible within the recognized site network of the system. If the site is intended to be newly added, ensure that the appropriate creation or registration process has been completed to integrate it into the system. | |
| 200 | Site.NSNotFound | The specified site name does not have ns records. | The current NS records for the site do not exist. | |
| 400 | Site.ServiceBusy | This specified site is being configured, please try again later. | The site is being configured. Try again later. | |
| 400 | Site.UpdateAccessTypeUnable | Unable to update the access type of the specified site. Check whether there are any functions or records that are not supported by the target access type. | The access type of the site cannot be updated. Check whether configurations or records exist that are not supported by the target access type. | |
| 400 | SiteConfigLengthExceedLimit | The overall configuration size of the site exceeds the limit, and the total size of all functional configurations of the site cannot exceed 512K. | The site feature configuration size exceeds the limit. The total size cannot exceed 512 KB. | |
| 400 | SiteEnvironment.Conflict | The specified site environment conflicts with an existing environment. | The specified site environment conflicts with an existing environment. | |
| 400 | SiteEnvironment.DeleteDenied | The default site environment cannot be deleted. | The default site environment cannot be deleted. | |
| 400 | SiteEnvironment.NotExist | The specified site environment does not exist. | The specified site environment does not exist. | |
| 400 | SiteEnvironment.UpdateDenied | The update operation for the specified site environment was denied. | The update operation for the specified site environment is prohibited. | |
| 400 | SiteNotActivated | The site is not activated, the process is not allowed. | The site is not activated. This operation is not supported. | |
| 404 | SiteNotFound | The site does not exist or does not belong to you. | The site does not exist or does not belong to you. | |
| 400 | SiteNotFound | The specified site is not found. | The specified site does not exist. Verify that the entered site is correct. | |
| 400 | SiteParameterNotMatch | Failed to verify the entered site-related parameters. | The validation of site-related parameters failed. | |
| 200 | SiteVerify.Unpassed | Site ownership verification failed. | The site ownership verification failed. | |
| 400 | SiteVersion.Configuring | The specified site version is being configured. | The specified site version is being cloned. Try again later. | |
| 400 | SiteVersion.DeleteDenied | The specified version is prohibited from being deleted because it is deployed to an environment. | The specified version cannot be deleted because it is deployed to an environment. | |
| 400 | SiteVersion.NotExist | The specified site version does not exist. | The specified site version does not exist. | |
| 400 | SourceAddressInvalid | The source address is invalid, and the ip or domain name format is invalid. | The addresses of the origin server are invalid. The IP address or domain name format is invalid. | |
| 400 | SourceInBlacklist | Source is in the blacklist. | The origin server is in the blacklist. | |
| 400 | SourceIp.Exceed | The maximum number of back-to-origin IP addresses is exceeded. | The number of back-to-origin IP addresses exceeds the limit. | |
| 400 | SourceNumberExceedLimit | The number of sources in the origin pool exceeds the quota limit. | The number of origin servers that you can create in the origin pool has reached the upper limit of your plan. Check your plan quota and upgrade your plan to obtain more quota. | |
| 400 | SourceTypeNotSupport | The incoming source type is not supported. | The specified origin server type is not supported. Only the following origin server types are supported: ip_domain, OSS, FC, and S3. Other types are not supported. | |
| 400 | Specification.OverLimit | Specifications exceed the limit, paid version can use 50ms, 100ms, free version can only use 5ms. | The specification exceeds the limit. The paid edition supports 50 ms and 100 ms, and the free edition supports only 5 ms. | |
| 400 | SpecifiedVersionReadOnly | The specified version number is read-only and cannot be modified. | The specified version is a read-only version. You cannot modify the version configuration. | |
| 400 | sslPri.Error | Error encoding SSLPri. | Failed to encode sslPri. | |
| 400 | SSLPri.MissingParameter | The SSLPri parameter is required. | Enter SSLPri. | |
| 400 | sslPub.Error | Error encoding SSLPub. | Failed to encode sslPub. | |
| 400 | SSLPub.MissingParameter | The SSLPub parameter is required. | Enter SSLPub. | |
| 400 | StagingConfig.Failed | The rules for the staging environment are being configured. Try again later. | The canary environment is being configured. Try again later. | |
| 404 | StagingConfig.NotFound | The staging configuration does not exist. | The configuration does not exist in the canary environment. | |
| 403 | StatusForbidden | The request is forbidden. | The request is denied. | |
| 400 | SubscriptionAlreadyExists | The subscription already exists. | The custom service is already activated. | |
| 400 | SubscriptionNotFound | The subscription is not found. | The custom service is not activated. | |
| 400 | SubSiteUnavailable | Sub site is unsupported. | Only Enterprise Edition plan instances can add sub-sites. | |
| 400 | SYSTEM.NoSpecificCodeFailed | Invalid period value. | The purchase cycle parameter is invalid. | |
| 400 | SystemTagIsInvalid | The number of System Tag exceeds 50. | The number of system tags exceeds 50. | |
| 403 | SystemUpgrading | The system is being upgraded; please try again later. | The system is being upgraded. Try again later. | |
| 400 | TagIsInvalid | The number of Tag exceeds 20. | The number of tags exceeds 20. | |
| 400 | TagKeyDuplicated | The specified TagKey is duplicated. | The TagKey is duplicate. | |
| 400 | TagKeyIsInvalid | The specified TagKey is invalid. | The TagKey is invalid. | |
| 400 | TagKeyRepeated | The specified TagKey is duplicated. | The TagKey contains duplicate values. | |
| 400 | TagValueIsInvalid | The specified TagValue is invalid. | The TagValue is invalid. Enter a new value. | |
| 400 | TimeParseFailed | Failed to parse the time parameter. | Failed to parse the time parameter. | |
| 400 | TooMany.Refresh | The refresh queue is full; please try again later. | The number of domain names being refreshed has reached the upper limit. Try again later. | |
| 400 | TooManyPorts | The number of ports exceeds the limit. | The number of ports exceeds the limit. | |
| 429 | TooManyRequests | The server is busy. Please try again later. | The server is busy. Try again later. | |
| 429 | TooManyRequests | Too many requests are submitted. | The request rate is too high. | |
| 429 | TooManyRequests | Too many requests, please try again later | Submissions are too frequent. Try again later. | |
| 400 | TooManyTags | You have entered too many tags. | Too many tags. Enter again. | |
| 429 | TooQuickRequests | Request for putting or deleting keys are frequently submitted. | The key put/delete operations are too frequent. | |
| 404 | TopLevelDomain.Conflicts | The added domain conflicts with the top level domain. | The new domain name conflicts with the top-level access domain. | |
| 400 | TopLevelDomain.Mismatch | The specified TopLevelDomain does not match webSiteType. | The top-level access domain and the domain name type do not match. | |
| 400 | TopLevelDomain.NotFound | The specified TopLevelDomain does not exist. | The top-level access domain does not exist. | |
| 400 | Unauthorized | RealtimeLogDelivery service is not authorized. | Real-time log delivery is not authorized. | |
| 403 | Unauthorized.InvalidParameters | The specified authentication parameters are invalid. | The authentication parameter is invalid. | |
| 403 | Unauthorized.InvalidResource | Resource authentication failed. | Resource verification failed. | |
| 403 | Unauthorized.InvalidTime | The specified authentication time is invalid. | The authentication time parameter you entered is invalid. Check the parameter value and try again. | |
| 403 | Unauthorized.InvalidToken | Token authentication failed. | The token you entered is invalid. Check and enter a valid token, and then try again. | |
| 422 | UnprocessableEntity | Configuration failed due to invalid data, missing required fields, or missing resources. | The configuration failed because of invalid data, missing required fields, or missing resources. | |
| 400 | UnsupportedParameter | The specified OwnerId and OwnerAccount are not supported. | The parameter is not supported. | |
| 404 | UnsupportQuota | The current operation does not support this quota. Check whether the quota is valid. | The quota is not supported for the current operation. Check whether the specified quota is valid. | |
| 400 | UpdateErServiceError | The billing type is only allowed to be modified once or the specification exceeds the limit within 24 hours. The paid version can use 50ms and 100ms, while the free version can only use 5ms. | The billing type can be changed only once within 24 hours, or the specification exceeds the limit. The paid edition supports 50 ms and 100 ms, while the free edition supports only 5 ms. | |
| 400 | UserWithoutConfLabel | the user has not configured the required label information, such as L2IpGroup. | The user has not configured the required configuration tag information. | |
| 400 | VersionBusy | The current version is being configured, please try again later. | The current version is being configured. Try again later. | |
| 400 | VersionError | This version has been activated in staging environment. | This version has already been activated in the canary environment. | |
| 400 | VersionNoDomain | The version cannot be activated without domains. | No domain names exist under this version. The version cannot be activated. | |
| 400 | VersionNotValid | The site does not have version management enabled, or the version number passed in does not exist. | The site does not have version management enabled, or the specified version does not exist. | |
| 400 | VersionOverLimit | The number of versions exceeds the limit. | The number of versions exceeds the limit. | |
| 400 | WafGroup.BeingBound | The specified WAF group is being bound. | The specified WAF rule group is attached to one or more protection policies. | |
| 400 | WafGroup.Name.Malformed | The specified parameter Name is invalid. | The format of the specified Name parameter is invalid. | |
| 400 | WafGroup.NotExist | The specified WAF group does not exist. | The specified WAF rule group does not exist. | |
| 400 | WafGroup.Quantity.Overflow | WAF groups are overflowed quantity. | The number of WAF rule groups exceeds the quota. | |
| 400 | WaitingRoomEventNotExist | The waiting room event does not exist. | The Waiting Room event does not exist. | |
| 400 | WaitingRoomNotExist | The waiting room does not exist. | The Waiting Room does not exist. | |
| 400 | WaitingRoomRuleNotExist | The waiting room rule does not exist. | The Waiting Room bypass rule does not exist. | |
| 400 | ConfigGroup.DomainBizNotMatched | There are unsupported business types in the domain name bound to the configuration group. The configuration group only supports three types of domain business types: image, video, and download. | The domain names bound to the configuration group contain unsupported business types. Configuration groups support only the following domain name business types: image, video, and download. | |
| 400 | ConfigGroup.DomainQuotaLimit | The number of domain names exceeds the limit, and a configuration group can be associated with up to 50 city names. | The number of domain names exceeds the limit. A maximum of 50 domain names can be associated with a configuration group. |
Is this page helpful?