Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 403 | %s.NotSupport | The specified resource type %s is not supported. | The specified resource type is not supported. To use this resource type, contact us. | |
| 403 | %s.OverQuota | The quantity of %s exceeds the quota. | The number of resources exceeds the quota limit. To request a higher quota, contact us. | |
| 403 | %s.WrongValueMatched | The value of specified parameter %s can not pass the matching check. | The value of the specified parameter failed validation. If you need to use this parameter value, contact us. | |
| 400 | AccountBlacklist | Account blacklist restrictions, please submit a work order to contact customer service for processing. | The account is restricted by a blacklist. Submit a ticket to contact customer service. | |
| 400 | AccountStatusIllegal | The account status is illegal. | The account status is invalid. | |
| 400 | ActiveSiteNotExist | Failed to match an active website based on the hostname you specified. Check whether the hostname is correct or activate the website first. | No activated site was found for the record name that you attempted to bind. Check the record name or activate the relevant site first. | |
| 400 | AppAlreadyExist | The containerized application name already exists. Specify another name. | The container application name already exists. Specify a different name. | |
| 400 | ApplyCertificateNotAllowed | The certificate application is not allowed for current site. | Free certificate application is not allowed for the current site. Make sure the site is activated. To apply for a wildcard domain certificate, make sure the current site is connected by using the NS method. | |
| 400 | ApplyVanityNSError | Failed to apply for vanity NS resources. Please contact customer service. | Failed to apply for custom NS resources. Submit a ticket to contact customer service. | |
| 400 | ApplyVipError | Failed to apply for ip resources, please contact customer service. | Failed to apply for IP resources. Contact customer service. | |
| 400 | ArgQuotaCheckFailed | The passed-in parameter value failed to verify the validity of the plan. Please check the plan document to obtain the range of parameters that can be configured for the site plan. | The current plan does not support configuring restricted parameters. Check the input parameters. | |
| 400 | BASIC_INFO_UNCOMPLETED | You have not completed your personal basic information. Please complete the information and try again. | You have not completed your basic personal information. Complete sign-up and try again. If the current account is a trusteeship linked account, ask the main account to complete sign-up by clicking the following link. Complete sign-up . | |
| 400 | BillingMode.NotChanged | Failed to change the plan because the new plan you specified is the same as the current one in use. Specify a correct plan and try again. | The billing method of the current product is the same as the requested billing method. Check and specify the correct billing method parameter. | |
| 400 | BillingMode.Overdue | Failed to change the plan because you have overdue payments.Top up your account and try again. | You cannot change the billing method when your account has an overdue payment. Make sure your account balance is greater than 0 and try again. | |
| 400 | BillingMode.OverLimit | Failed to change the plan. You are only allowed to change your plan once within 24 hours. | You can change the billing method at most once within 24 hours. | |
| 400 | BuyWithSiteAmountErr | Site-based purchase plans do not support bulk purchasing. | Purchasing a plan with a site does not support batch purchases. | |
| 400 | CachceReserveInstanceCheckFalied | If the site uses the back-to-source whitelist node and the cache holding instance is not in the back-to-source whitelist, the cache holding instance cannot be associated with the site. If you want to use both functions at the same time, please contact customer service for details. | The site uses back-to-origin whitelist nodes, and the cache reserve instance is not in the back-to-origin whitelist. In this case, you cannot associate the cache reserve instance with the site. To use both features, contact customer service for details. | |
| 400 | CacheReserveSiteExceedLimit | The number of binding sites of the cache reserve instance exceeds the limit. The number of binding sites of a single cache reserve instance is limited. Please see the document for the limit. | The number of sites bound to the cache reserve instance exceeds the upper limit. | |
| 400 | CanNotSetSequence | Non-regular configuration, you cannot set Sequence parameters. | The Sequence parameter cannot be set in the global configuration. | |
| 403 | Captcha.Configuration.AlreadyExists | The specified captcha configuration already exists in the system. | The specified CAPTCHA configuration rule (Method + URI) already exists in the system and cannot be reused. Provide a unique combination that does not conflict with existing configuration rules, or modify the existing configuration rules to eliminate potential conflicts. Each CAPTCHA configuration rule must be unique. | |
| 404 | Captcha.NotExist | The specified captcha rule does not exist. | The requested CAPTCHA rule does not exist. Verify that the rule ID is correct. | |
| 400 | CasId.MissingParameter | The CasId parameter is required. | The CasId parameter is missing. | |
| 400 | CertId.MissingParameter | The parameter CertId is required. | The required parameter CertId is missing. | |
| 400 | Certificate.Duplicated | The certificate name already exists. | The certificate is a duplicate. | |
| 400 | Certificate.MissingParameter | The Certificate parameter is required. | The Certificate parameter is missing. | |
| 404 | Certificate.NotFound | The specified certificate does not exist. | The specified certificate does not exist. | |
| 400 | Certificate.StatusError | The status of the certificate is invalid. | The certificate status is invalid. | |
| 400 | CertificateDomainNotMatchSite | The domain name in the specified certificate does not match the site. | The domain name in the certificate does not match the current site. | |
| 400 | CertificateNotMatchPrivateKey | The specified certificate does not match the private key. | The specified certificate and private key do not match. | |
| 400 | CertList.NotFound | The specified CertList does not exist. | The queried certificate list does not exist. | |
| 400 | CertQuotaCheckFailed | The custom certificate quota verification failed. The number of uploaded certificates exceeds the upper limit allowed for the plan. | Custom certificate quota validation failed. The number of uploaded certificates exceeds the maximum allowed by the plan. | |
| 400 | CheckCertificateQuotaFailed | Failed to query the quota of free certificates. Try again later. | Failed to retrieve the free certificate quota. Try again later. | |
| 400 | CheckCertificateQuotaFailed | Failed to query the number of used free certificates. Try again later. | Failed to retrieve the usage of free certificates. Try again later. | |
| 400 | CheckOrderFailed | Invalid order parameter. | The order parameters are invalid. | |
| 400 | CheckPlanFailed | Invalid plan name or code. Check and try again. | The plan name or plan code that you configured is incorrect. Make sure you have specified the correct plan name or plan code and try again. | |
| 400 | ClientCertificate.OverLimit | You are allowed to create 20 client certificates at most under current site. | A maximum of 20 client certificates can be created for the current site. | |
| 400 | CloudUserCannotBuyNotInnerCommodity | No group cloud product label, can not be purchased. | The product does not have the enterprise cloud migration tag and cannot be purchased. | |
| 400 | CodeVersionInUse | Failed to delete the code version because it is being used. Before you delete it, roll back to the previous version. | The code version is in use and cannot be directly deleted. Roll back this version to the previous version first, and then try the delete operation. | |
| 400 | CodeVersionNumberExceedQuotaLimit | The maximum number of code versions in your plan has been reached. Check your plan quota and upgrade the plan to request a quota increase. | The number of code versions has reached the plan limit. Check your plan quota and upgrade your plan to obtain more code version quota. | |
| 400 | CompileRuleError | Rule compilation failed, please check the rule information passed in to ensure that the rule is written according to the syntax described in the document. | Rule compilation failed. Check the rule configuration that you specified. Refer to the rule configuration format described in the API documentation. | |
| 400 | ConfExceedLimit | The number of function configurations exceeds the limit. Please check the interface document to see the number of configurations that can be supported by a single function. | The number of configuration items for the current feature has exceeded the upper limit set by the system. | |
| 400 | ConfigConflicts | Configuration conflicts, usually when multiple configurations are configured under the same function of the same site, such as duplicate rule names between multiple configurations. | Parameter uniqueness check failed. Check for duplicate parameter values. | |
| 400 | ContainForbiddenLabelError | Placing an order is blocked due to an applied restriction label. | An order-blocking tag exists. The order cannot be placed. | |
| 403 | CreateESASlsProjectFailed | Failed to create the task that delivers real-time logs to SLS. Check your configurations and try again. | Failed to create the real-time log delivery task for Simple Log Service (SLS). Check the configuration and try again. | |
| 400 | CreateFunctionFailed | The configuration of the new site function failed. Please check the CreateSiteFunction interface document and check the parameters. | Failed to add the site feature configuration. Refer to the CreateSiteFunction API documentation and check the parameters. | |
| 400 | CreateRealTimeLogSlrError | You do not have permissions to create a service-linked role.Contact your account administrator to attach the AliyunServiceRoleForESARealtimeLogPushSLS policy or a custom policy that grants permissions to create a service-linked role to the current user.Service: <"/><"/>esarealtimelogpushsls.dcdnservices.aliyuncs.com<"/><"/>. | You do not have permissions to create a service-linked role. Contact the administrator of your Alibaba Cloud account to grant you the AliyunServiceRoleForESARealtimeLogPushSLS policy or a custom policy for creating service-linked roles. Service name: "esarealtimelogpushsls.dcdnservices.aliyuncs.com". Action: ram:CreateServiceLinkedRole. | |
| 400 | CreateTimeError | The effective time of the same policy template cannot overlap. | The effective time periods of the same policy template cannot overlap. | |
| 400 | DependedByOthers | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact customer service for details. | |
| 400 | DnsSecDenied | Only sites accessed by NS can enable DNSSEC. | The DNSSEC feature can be enabled only for sites that use NS access. | |
| 403 | Domain.NotSupport.Waf | Failed to enable WAF for the domain due to incompatible scheduling domain configurations or properties. Check and adjust your configurations and try again. If the problem persists, contact technical support. | The domain name cannot be added to WAF protection because of incompatible scheduling configuration domains or properties. Check and adjust the related settings and try again. If the issue persists, contact customer service. | |
| 400 | DomainInRiskList | The domain you added may be at risk. If you have any questions, please submit a ticket. | The domain name you added may pose a risk. If you have any questions, submit a ticket. | |
| 400 | DomainNameOverLimit | A maximum of 500 domains are supported for each request. | A maximum of 500 domain names are supported in a single request. Reduce the number of domain names and try again. | |
| 400 | DuplicateRequirementTicket | Repeated demand order. | You have already submitted a request. Do not submit duplicate requests. | |
| 400 | EdgeContainer.HasOpened | You have already activated Edge Container. | You have already activated Edge Container. | |
| 400 | EdgePortsOverlap | There is overlap between multiple edge ports, please check and try again after modification. | Overlapping edge ports detected. Check and modify the configuration, and then try again. | |
| 400 | EnterpriseAmountErr | Enterprise plans do not support bulk purchase. | The Enterprise plan does not support bulk purchases. | |
| 400 | ErrSiteIdNoteEnterprise | This feature is unavailable because your website is not associated with an Enterprise plan. Upgrade your plan to Enterprise. | The current site is not on the Enterprise plan. This feature is unavailable. Upgrade the site to the Enterprise plan. | |
| 400 | ErService.HasOpened | You have already activated Edge Routine. | You have already activated the Edge Routine service. No need to activate it again. | |
| 403 | ErService.NotOpen | Er service has not opend. | You have not activated the Edge Routine service. | |
| 403 | EsaService.NotOpen | ESA service has not opend. | Edge secure acceleration (ESA) is not activated. | |
| 400 | ExceedFileUpload | The size of the uploaded file exceeds the upper limit. Select a file less than 10 MB. | The uploaded file size exceeds the limit. Select a file smaller than 10 MB and upload it again. | |
| 403 | Expression.Invalid | Expression syntax error or data type mismatched. | Expression syntax error or data type mismatch. Check the table format. | |
| 403 | Expression.Invalid | The specified expression is invalid: %s. | The specified expression is invalid. | |
| 403 | Forbidden | You are not authorized to operate this resource, or this API does not support RAM. | You are not authorized to perform operations on this resource, or this API does not support RAM. | |
| 400 | FunctionConflict | The feature configuration conflicts. Sites with version management enabled cannot configure this feature. | The current feature configuration conflicts with another feature. Delete the conflicting feature configuration before proceeding. | |
| 400 | FunctionQuotaCheckFailed | The quota verification for this function fails. It may be that the configuration of this function exceeds the limit of the site plan. Please check the plan introduction document corresponding to this site. | The current plan does not support configuring the restricted function. Check the feature descriptions for your plan. | |
| 400 | HostnameNumberExceedLimit | The maximum number of hostnames associated with the CA certificate you specified has been reached. | The number of domain names bound to the CA certificate has exceeded the limit. Each CA certificate can be bound to a maximum of 50 domain names. | |
| 400 | Id.MissingParameter | The parameter Id is required. | The required parameter Id is missing. | |
| 400 | IllegalOperation.VersionManagement | The version management operation failed because incompatible features or environment settings are configured. Adjust your configurations and try again. | A mutually exclusive feature or environment setting exists for the current version management operation. Adjust the related configuration and try again. | |
| 400 | Instance.NotOnline | Your plan is unavailable due to an overdue payment. Complete the payment first. | Your plan instance is currently inactive due to an overdue payment. Complete the renewal to continue using the service. | |
| 400 | Instance.ReleaseFailed | Instance release failed. | Failed to release the instance. | |
| 400 | Instance.UpdateSpecError | The security instance can only be changed after 31 days of purchase, and can only be changed once a natural month. | The security instance can be reconfigured only after 31 days from purchase, and only once per calendar year. | |
| 400 | InstanceNotExist | The instance does not exist. Check whether the specified instance ID is correct or whether the instance belongs to your account. | The instance does not exist. Check whether the provided instance ID is correct or whether the instance belongs to your account. | |
| 400 | InsufficientAvailableQuota | Your account balance is insufficient. | Your account has an overdue payment. Clear the overdue payment before making a purchase. | |
| 400 | InsufficientBalance | Your account balance is insufficient. | Your account balance is insufficient. Top up your account before making a purchase. | |
| 400 | InternalError | An internal exception occurred, please try again later. | An internal exception occurred. Try again later. | |
| 500 | InternalError | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact customer service for details. | |
| 400 | InternalException | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact customer service for details. | |
| 400 | InternalOperationError | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact customer service for details. | |
| 400 | Invalid.Parameter | Invalid request parameters for querying standard logs. Check and try again. | Invalid request parameters for querying offline logs. Verify the parameters and try again. | |
| 400 | Invalid.Value | Invalid value in the key-value pair. Make sure the value is Base64-encoded. | The Value in the KV data is invalid. Make sure that the Value is Base64-encoded. | |
| 400 | InvalidAccount.Malformed | The specified account is invalid. | The account input is invalid. For example, the input is empty. | |
| 404 | InvalidAccount.NotFound | The specified account does not exist. | The specified account does not exist. | |
| 404 | InvalidApp.NotFound | The application does not exist. Check whether the application ID you specified is correct and try again. | The application corresponding to the specified application ID does not exist. Check the application ID and try again. | |
| 400 | InvalidArgName | The parameter name does not exist, please check the function interface document. | The specified parameter name does not exist. Refer to the API documentation. | |
| 400 | InvalidCertificate.NotFound | The specified certificate does not match the website. Check the validity of the certificate and try again. | The certificate you provided does not match the site. Verify the certificate validity and try again. | |
| 400 | InvalidComponent | The order parameters is invalid. | The order configuration parameters do not meet the validation requirements. | |
| 400 | InvalidConfigId | The input configuration ID: ConfigId it does not exist, query the existing configuration and its valid ConfigId through the ListSiteFunction. | The specified ConfigId does not exist. | |
| 400 | InvalidEndTime.Malformed | The specified EndTime is invalid. | Provide a valid end time format. The date format follows the ISO 8601 standard and uses UTC. Format: yyyy-MM-ddTHH:mm:ssZ. | |
| 400 | InvalidEndTime.Mismatch | The specified EndTime is earlier than the StartTime. | The end time is earlier than the start time. Check the values and try again. | |
| 400 | InvalidExecution.CountFull | The maximum number of prefetch plans has been reached. Delete some completed tasks and try again. | The number of prefetch plans has reached the upper limit. Delete some completed prefetch tasks and try again. | |
| 404 | InvalidExecution.NotFound | The execution plan does not exist. Check whether the parameters such as the execution ID, start time, and end time are correct. | The execution plan does not exist. Check whether the execution ID, start time, end time, and other parameters are correct. | |
| 400 | InvalidFunctions.Malformed | The specified Functions is invalid. | The configuration is not supported. Enter a valid configuration. | |
| 400 | InvalidInstance | The instance ID is missing or invalid. Make sure that the instance ID is valid and try again. | The instance ID is missing or invalid. Verify the instance ID and try again. | |
| 400 | InvalidJob.JobCountOfSiteFull | The maximum number of prefetch tasks for the website has been reached. Delete some unwanted ones and try again. | The number of site prefetch tasks has reached the upper limit. No more tasks can be added. Delete unnecessary tasks and try again. | |
| 404 | InvalidJob.NotFound | The task does not exist. Check whether the task ID is correct or whether the task has been deleted. | The task does not exist. Check whether the task ID is correct or whether the task has been deleted. | |
| 403 | InvalidKey.ExceedsCapacity | The maximum storage capacity of the Edge KV namespace has been reached. Delete unwanted key-value pairs to save the storage. | The capacity of the edge storage namespace has exceeded the limit. Clean up unused keys in the namespace to reduce storage consumption. | |
| 403 | InvalidKey.ExceedsCapacity | The maximum capacity of a single namespace cannot exceed 1 GB. | The storage capacity has exceeded the limit. | |
| 400 | InvalidKey.ExceedsMaximum | The size of the key cannot exceed 512 bytes. | The length of the requested key is too large. | |
| 400 | InvalidKey.Malformed | The specified key is invalid. | The key name input is invalid. For example, the input is an empty string. | |
| 404 | InvalidKey.NotFound | The specified key does not exist. | The specified key-value pair does not exist. | |
| 406 | InvalidKey.QuotaFull | The total number of IP exceeds the quota. | The total number of IP addresses has exceeded the quota. | |
| 400 | InvalidKey.TooManyDimensions | Request contains too many dimensions. | Too many query dimensions are specified. Check the request parameters and reduce the number of query dimensions. For more information, refer to the API documentation. | |
| 406 | InvalidNameSpace.Duplicate | The specified namespace already exists. | The specified namespace already exists. | |
| 400 | InvalidNameSpace.Malformed | The specified namespace is invalid. | The namespace name input is invalid. For example, the input is an empty string. | |
| 404 | InvalidNameSpace.NotFound | The specified namespace does not exist. | The specified namespace does not exist. | |
| 406 | InvalidNameSpace.QuotaFull | The maximum number of namespaces is exceeded. | The number of namespaces has exceeded the capacity limit. | |
| 400 | InvalidNextToken | The specified parameter NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | InvalidPageSize.ValueNotSupported | The PageSize value is invalid. The default value is set to 20. The acceptable range is between 1 and 500. | The PageSize value is invalid. The default value is 20. Valid values: 1 to 500. | |
| 400 | InvalidParameter | Invalid parameter. Check the parameter configuration. | Parameter validation failed. Check the parameter values. | |
| 400 | InvalidParameter | Parameter verification failed. Check your configurations and try again. | The input parameter validation failed. Verify the parameters and try again. | |
| 400 | InvalidParameter | The specified parameter is invalid. | The input parameter format validation failed. | |
| 400 | InvalidParameter.AddressConflict | Duplicate origin addresses. Make sure that each origin address for the same pool is unique. | The specified addresses of the origin server conflict with existing ones. Duplicate addresses of the origin server are not allowed within the same IPAM pool. Ensure that each address of the origin server is unique. | |
| 400 | InvalidParameter.ApiItems.Api | The parameter apiItems api is invalid. | The api parameter in apiItems is invalid. | |
| 400 | InvalidParameter.ApiItems.Host | The parameter apiItems host is invalid. | The host parameter in apiItems is invalid. | |
| 400 | InvalidParameter.ApiShield.Quota | This website does not have the permission to view API security features. | The site does not have permission to view API security features. | |
| 400 | InvalidParameter.appid | The format of the application ID is invalid. You can call ListEdgeContainerApps to obtain the application ID. | The specified application ID format is invalid. Call the ListEdgeContainerApps operation to obtain the application ID. | |
| 400 | InvalidParameter.Appid | The format of the application ID is invalid. You can call ListEdgeContainerApps to obtain the application ID. | The specified application ID format is invalid. Call the ListEdgeContainerApps operation to obtain the application ID. | |
| 400 | InvalidParameter.ArgName | Invalid ArgName. Check your website configuration parameters and make sure that they match the supported features and parameter names listed in the official documentation. | The specified ArgName is invalid. Check the site configuration parameters and ensure they match the supported features and parameter names listed in the official documentation. | |
| 400 | InvalidParameter.ArgValue | Invalid parameter value. Check whether the value format and length meet the requirements. | The parameter value is invalid. Check whether the input meets the required format and length restrictions. | |
| 400 | InvalidParameter.ClientIpPassThroughMode | Invalid client IP transfer protocol, please refer to the interface document and pass in valid parameters. | The client IP pass-through protocol is invalid. Refer to the API documentation and provide a valid parameter value. | |
| 400 | InvalidParameter.CnameSiteRecordNoProxied | A non-proxied record was added for a website using a CNAME setup. | A record without acceleration enabled was submitted for a site connected by using the CNAME method. | |
| 400 | InvalidParameter.CnameSiteRecordUnsupport | The current record type is not supported for a website connected by CNAME setup. | Sites connected by using the CNAME method support only A/AAAA and CNAME record types. | |
| 400 | InvalidParameter.ConfigIds | Invalid ConfigId. Specify an existing Configld and make sure it is in the valid format. | The specified ConfigId is invalid. Make sure that the ConfigId sequence exists and is in the correct format. | |
| 400 | InvalidParameter.Configs | Invalid parameter configurations. Check whether your feature configurations are in the valid format and comply with relevant requirements. | The configuration parameter is invalid. Check whether the site feature settings comply with the specified format and requirements. | |
| 400 | InvalidParameter.Coverage | The selected location is unavailable in your plan. Change the location to one that is covered by the plan and try again. | The acceleration region you selected is not supported by your current plan. Change to an acceleration region supported by your plan and try again. | |
| 400 | InvalidParameter.Dimension | The specified Dimension is invalid. | The query dimension is invalid. Check whether the request parameters exist and are valid. For more information, refer to the OpenAPI documentation. | |
| 400 | InvalidParameter.DomainNotBelongingUser | The domain name passed in does not belong to the current user. | The specified domain name does not belong to the current user. | |
| 400 | InvalidParameter.Domains | Duplicate domain names are specified for parameter Domains. Remove one of them and try again. | The specified Domains parameter contains duplicate domain names. Remove the duplicates and try again. | |
| 400 | InvalidParameter.Domains | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. | The number of domain names in the Domains parameter exceeds the quota. Specify fewer domain names and try again. | |
| 400 | InvalidParameter.Domains | You have already submitted a certificate application for the domain name. | A certificate application task for this domain name has already been submitted. Do not submit duplicate requests. | |
| 400 | InvalidParameter.Domains | One or more domain names specified by parameter Domains do not belong to the current website. Check and try again. | The Domains parameter contains domain names that do not belong to the current site. Check the domain names and try again. | |
| 400 | InvalidParameter.Domains | The domain specified in Domains parameter is not a valid domain name, please check and try again. | The Domains parameter contains invalid domain names. Check the domain names and try again. | |
| 400 | InvalidParameter.Domains | The site you configured is currently accessed in the CNAME mode. Please switch to the NS mode and try again. | The site is currently connected by using the CNAME method. Switch to the NS method and try again. | |
| 400 | InvalidParameter.Domains | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. The upper limit of lets.encrypt type domain name is 50, the upper limit of digicert.single type domain name is 10, and the upper limit of digicert.wildcard type domain name is 1. | The number of domain names in the Domains parameter exceeds the quota. Specify fewer domain names and try again. The upper limit is 50 for lets_encrypt, 10 for digicert_single, and 1 for digicert_wildcard. | |
| 400 | InvalidParameter.Domains | The site which is configured in CNAME mode does not support wildcard domain certificate application. | CNAME sites do not support applying for free wildcard domain name certificates. | |
| 400 | InvalidParameter.DomainsExceedLimit | The number of incoming domain names exceeds the maximum limit. | The number of specified domain names exceeds the maximum limit. | |
| 400 | InvalidParameter.DomainSourceTypeNotSupport | The underlying source type of the domain is not supported. | The basic origin server type of the domain name is not supported. | |
| 400 | InvalidParameter.EmptyAKSK | AK,SK information cannot be empty. | The AK and SK cannot be empty. | |
| 400 | InvalidParameter.EndpointId | The parameter EndpointId is invalid. | The EndpointId parameter is invalid. | |
| 400 | InvalidParameter.ExistedHandlingTask | There is a task in process, waiting for execution to complete. | A task is being processed. Wait for it to complete. | |
| 400 | InvalidParameter.Field | The specified Field is invalid. | The query metric is invalid. Check whether the request parameters exist and are valid. For more information, refer to the OpenAPI documentation. | |
| 400 | InvalidParameter.FunctionName | The specified feature does not exist. Specify a valid feature name based on the related documentation. | The specified feature name does not exist. Refer to the feature configuration documentation and specify a valid feature name. | |
| 400 | InvalidParameter.FuzzySearch | The parameter fuzzySearch is invalid. | The fuzzySearch parameter is invalid. | |
| 400 | InvalidParameter.HealthCheckFailTimes | Specified parameter HealthCheckFailTimes is not valid. | The HealthCheckFailTimes parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckHost | Specified parameter HealthCheckHost is not valid. | The HealthCheckHost parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckHttpCode | Specified parameter HealthCheckHttpCode is not valid. | The HealthCheckHttpCode parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckInterval | Specified parameter HealthCheckInterval is not valid. | The HealthCheckInterval parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckMethod | Specified parameter HealthCheckMethod is not valid. | The HealthCheckMethod parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckPort | Specified parameter HealthCheckPort is not valid. | The HealthCheckPort parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckSuccTimes | Specified parameter HealthCheckSuccTimes is not valid. | The HealthCheckSuccTimes parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckTimeout | Specified parameter HealthCheckTimeout is not valid. | The HealthCheckTimeout parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckType | Specified parameter HealthCheckType is not valid. | The HealthCheckType parameter is in an incorrect format. | |
| 400 | InvalidParameter.HealthCheckURI | Specified parameter HealthCheckURI is not valid. | The HealthCheckURI parameter is in an incorrect format. | |
| 400 | InvalidParameter.HttpHeaders | The specified HttpHeaders is invalid. Please check the HttpHeaders parameter. Please make the necessary changes and call the interface again. | The HttpHeaders parameter is invalid. Check whether the HttpHeaders parameter is specified. This parameter cannot contain invalid characters such as @ or #. Modify the parameter and invoke the operation again. | |
| 400 | InvalidParameter.Image | The specified Image is invalid. Please check the Image parameter and make the necessary modifications and call the interface again. | The Image parameter is invalid. Check the Image parameter. This parameter cannot contain invalid characters such as @, #, or %. Modify the parameter and invoke the operation again. | |
| 400 | InvalidParameter.InvalidBiz | the value of the business type is empty or the incoming parameter is invalid. | The business type value is empty or the specified parameter is invalid. | |
| 400 | InvalidParameter.InvalidBiz | The incoming parameter value of the business type is empty or incorrect. | The business type value is empty or the specified parameter is invalid. | |
| 400 | InvalidParameter.InvalidDSRecordName | Please add/import an NS record with the same name before adding this DS record. | Add or import an NS record with the same name before adding this DS record. | |
| 400 | InvalidParameter.InvalidHostPolicy | The host parameter in the origin fetch request is invalid. | The origin host parameter is invalid. | |
| 400 | InvalidParameter.InvalidRecordName | The record name you entered does not meet the specifications. Change the record name according to the product documentation. | The record name you entered does not comply with the specifications. Adjust the record name according to the product documentation. | |
| 400 | InvalidParameter.InvalidRecordName | The DNS record name you entered does not meet the required specifications. Please adjust the record name according to the product documentation. | The record name you entered does not comply with the specifications. Adjust the record name according to the product documentation. | |
| 400 | InvalidParameter.InvalidRecordNameSuffix | If you add other records, the suffix of the host record must be the same as the site name. | To add a record with the same name as the site, set the host record to @. To add other records, the host record suffix must exactly match the site name. Adjust the configuration and try again. | |
| 400 | InvalidParameter.InvalidSiteEnvironmentName | The specified site environment name is invalid. | The site environment name is invalid. | |
| 400 | InvalidParameter.InvalidVanityNSName | A vanity nameserver must be an absolute domain name. Correct it and try again. | Custom NS names must be fully qualified domain names. Adjust the configuration and resubmit. | |
| 400 | InvalidParameter.InvalidVanityNSNum | Enter 2 to 5 vanity nameservers. Correct them and try again. | Custom NS requires 2 to 5 names. Adjust the configuration and resubmit. | |
| 400 | InvalidParameter.LoadBalancerNameInvalid | Invalid load balancer name. Make sure that you specify a valid subdomain name under your website domain for the load balancer. | The load balancing name you configured is invalid. Ensure that the name is a valid subdomain of the site. | |
| 400 | InvalidParameter.MethodFilter | The parameter methodFilter is invalid. | The methodFilter parameter is invalid. | |
| 400 | InvalidParameter.Name | The specified Name is invalid. Please check the Name parameter, which must be between 6 and 128 characters. Kindly make the necessary modifications and call the interface again. | The Name parameter is invalid. The Name parameter must be 6 to 128 characters in length. Modify the parameter and call the operation again. | |
| 400 | InvalidParameter.NotFoundDomain | The incoming domain name or some domain names cannot be found based on the user and product type. | The specified domain name or some domain names cannot be found based on the user and product type. | |
| 400 | InvalidParameter.NotMatchedCoverage | The domain name and the coverage of the site are inconsistent. | The acceleration regions of the domain name and the site are inconsistent. | |
| 400 | InvalidParameter.NotMatchedRootDomain | The domain name does not match the root domain name information for the site. | The domain name does not match the root domain information of the site. | |
| 400 | InvalidParameter.NotSupportedDomainBiz | The business type of the domain name is not supported. | The business type of the domain name is not supported. | |
| 400 | InvalidParameter.NotSupportedDomainStatus | The status of the domain name is not allowed. | The status of the domain name is not allowed. | |
| 400 | InvalidParameter.NotSupportedMultiChannelDomain | The multi-channel domain are not supported. | Multi-channel domain names are not supported. | |
| 400 | InvalidParameter.NotSupportVendor | Do not support the vendor, please select the vendor supported. | The specified vendor is not supported. Select a supported vendor. | |
| 400 | InvalidParameter.ObjectId | Invalid task ID or execution plan ID. | The task or execution plan ID you provided is invalid. Check whether the ID is valid and entered correctly. | |
| 400 | InvalidParameter.ObjectsAndSiteIds | The specified Objects and SiteIds variables cannot both be empty strings. | The specified Objects and SiteIds parameters cannot both be empty strings. | |
| 400 | InvalidParameter.OrderKey | The specified OrderKey is invalid. Please check the OrderKey parameter. | The OrderKey parameter is invalid. The OrderKey parameter cannot contain invalid characters such as @, #, or %. Modify the parameter and invoke the operation again. | |
| 400 | InvalidParameter.OrderType | The specified OrderType is invalid. Please check the OrderType parameter. You may not have set it to either Asc or Desc. Please make the necessary changes and call the interface again. | The OrderType parameter is invalid. The OrderType parameter must be set to Asc or Desc. Modify the parameter and call the operation again. | |
| 400 | InvalidParameter.PageNumber | Failed to verify parameter PageNumber.Check whether the parameter exists and is set to a positive integer. | The PageNumber parameter failed validation. Ensure that the request parameter exists and is a positive integer. | |
| 400 | InvalidParameter.Percentage | The Percentage parameter is invalid. Please check the Percentage parameter, which should be in the range of 1-100. Modify it accordingly and call the interface again. | The Percentage parameter is invalid. The Percentage parameter must be in the range of 1 to 100. Modify the parameter and call the operation again. | |
| 400 | InvalidParameter.Port | Invalid edge port or origin port. Enter a valid port as required in the interface document. | The edge port or origin server port is invalid. Specify a valid port as described in the API documentation. | |
| 400 | InvalidParameter.Protocol | Invalid port protocol. Enter a valid port protocol as required by the interface documentation. | The port protocol is invalid. Specify a valid port protocol as described in the API documentation. | |
| 400 | InvalidParameter.PublishEnv | The specified PublishEnv is invalid. Please check the PublishEnv parameter. It may not be set to either "prod" or "staging." Please make the necessary changes and call the interface again. | The PublishEnv parameter is invalid. The PublishEnv parameter must be set to prod or staging. Modify the parameter and call the operation again. | |
| 400 | InvalidParameter.RecordCommentExceedLimit | The number of incoming record comment exceeds the maximum limit. | The comment of the record exceeds 50 characters. | |
| 400 | InvalidParameter.RecordData | Invalid record content. Adjust your configurations based on the API documentation. | The record content parameter is invalid. Adjust the parameter based on the API documentation. | |
| 400 | InvalidParameter.RecordNameExceedLimit | The length of the record name exceeds the maximum limit. | The record name cannot exceed 200 characters. | |
| 400 | InvalidParameter.RecordNotBelongToSite | The record name passed in does not belong to the current site. | The specified record name does not belong to the current site. | |
| 400 | InvalidParameter.RecordsExceedLimit | The number of incoming records exceeds the maximum limit. | The number of records exceeds the maximum limit. | |
| 400 | InvalidParameter.RecordType | Invalid record type. Adjust your configurations based on the API documentation. | The record type is invalid. Adjust the parameter based on the API documentation. | |
| 400 | InvalidParameter.RuleSource | The origin of the forwarding rule does not exist or is invalid. Enter the correct origin and try again. | The origin server of the forwarding rule does not exist or is invalid. Specify a valid origin server and try again. | |
| 400 | InvalidParameter.SiteEnvironmentRuleDuplicate | The specified site environment rule is the same as an existing environment. | The site environment rule is the same as an existing environment. | |
| 400 | InvalidParameter.SiteId | Failed to query the website based on the SiteID you specified. Check parameter SiteId and try again. | The SiteId parameter is invalid. The site name cannot be obtained by using the specified SiteId. Verify the SiteId and try again. | |
| 400 | InvalidParameter.SiteId | The specified SiteId is invalid. | The site ID parameter is invalid. | |
| 400 | InvalidParameter.SiteName | Invalid website name. Specify a valid name that contains letters and digits and does not contain special characters. | The site name is invalid. Enter a valid site name that contains letters and digits but does not contain special characters. | |
| 400 | InvalidParameter.SiteVersionDescExceedLimit | The specified site version description exceeds the maximum length. | The site version description exceeds the maximum length. | |
| 400 | InvalidParameter.StateFilter | The parameter stateFilter is invalid. | The stateFilter parameter is invalid. | |
| 400 | InvalidParameter.TagValue | The specified TagValue is invalid. | The TagValue parameter is invalid. | |
| 400 | InvalidParameter.TimeRange | The specified time range exceeds the limit. Adjust it and try again. | The time range for data query is too long. Adjust the time range and try again. | |
| 403 | %s.NotSupport | The specified resource type %s is not supported. | The specified resource type is not supported. To use this type of resource, please contact us. | |
| 403 | %s.OverQuota | The quantity of %s exceeds the quota. | The amount of this resource exceeds the quota. If you need to apply for more quota, please contact us. | |
| 403 | %s.WrongValueMatched | The value of specified parameter %s can not pass the matching check. | The value of the specified parameter can not pass the matching check. If you determine that you need to use this parameter value, please contact us. | |
| 400 | AccountBlacklist | Account blacklist restrictions, please submit a work order to contact customer service for processing. | Account blacklist restrictions, please submit a work order to contact customer service for processing. | |
| 400 | AccountStatusIllegal | The account status is illegal. | The account status is illegal. | |
| 400 | ActiveSiteNotExist | Failed to match an active website based on the hostname you specified. Check whether the hostname is correct or activate the website first. | Failed to match an active website based on the hostname you specified. Check whether the hostname is correct or activate the website first. | |
| 400 | AppAlreadyExist | The containerized application name already exists. Specify another name. | The containerized application name already exists. Specify another name. | |
| 400 | ApplyCertificateNotAllowed | The certificate application is not allowed for current site. | The current site is not allowed to request a free certificate, please make sure the site is activated. To apply for a wildcard domain name certificate, make sure that the current site is accessed in NS mode. | |
| 400 | ApplyVanityNSError | Failed to apply for vanity NS resources. Please contact customer service. | Failed to apply for vanity NS resources. Please contact customer service. | |
| 400 | ApplyVipError | Failed to apply for ip resources, please contact customer service. | Failed to apply for IP resources, please contact customer service. | |
| 400 | ArgQuotaCheckFailed | The passed-in parameter value failed to verify the validity of the plan. Please check the plan document to obtain the range of parameters that can be configured for the site plan. | The current plan does not support the configuration of restricted parameters, please check the input parameters. | |
| 400 | BASIC_INFO_UNCOMPLETED | You have not completed your personal basic information. Please complete the information and try again. | You have not completed your basic personal information. Please complete the information and re-operate. (If the current account is a managed sub-account, please contact the main account and click this link to complete the information.) | |
| 400 | BillingMode.NotChanged | Failed to change the plan because the new plan you specified is the same as the current one in use. Specify a correct plan and try again. | Failed to change the plan because the new plan you specified is the same as the current one in use. Specify a correct plan and try again. | |
| 400 | BillingMode.Overdue | Failed to change the plan because you have overdue payments.Top up your account and try again. | Failed to change the plan because you have overdue payments.Top up your account and try again. | |
| 400 | BillingMode.OverLimit | Failed to change the plan. You are only allowed to change your plan once within 24 hours. | Failed to change the plan. You are only allowed to change your plan once within 24 hours. | |
| 400 | BuyWithSiteAmountErr | Site-based purchase plans do not support bulk purchasing. | Site-based purchase plans do not support bulk purchasing. | |
| 400 | CachceReserveInstanceCheckFalied | If the site uses the back-to-source whitelist node and the cache holding instance is not in the back-to-source whitelist, the cache holding instance cannot be associated with the site. If you want to use both functions at the same time, please contact customer service for details. | If the site uses the back-to-source whitelist node and the cache holding instance is not in the back-to-source whitelist, the cache holding instance cannot be associated with the site. If you want to use both functions at the same time, please contact customer service for details. | |
| 400 | CacheReserveSiteExceedLimit | The number of binding sites of the cache reserve instance exceeds the limit. The number of binding sites of a single cache reserve instance is limited. Please see the document for the limit. | The number of sites for which the cache reserve instance bindings exceeds the limit. | |
| 400 | CanNotSetSequence | Non-regular configuration, you cannot set Sequence parameters. | Sequence parameters is not allowed in global configuration. | |
| 403 | Captcha.Configuration.AlreadyExists | The specified captcha configuration already exists in the system. | The specified captcha configuration rule (Method + URI) already exists in the system. It cannot be duplicated. Please provide a unique combination that does not conflict with existing rules, or modify the existing rule to resolve the conflict and ensure uniqueness for each captcha configuration rule. | |
| 404 | Captcha.NotExist | The specified captcha rule does not exist. | The captcha rule you requested does not exist. Please verify the rule ID. | |
| 400 | CasId.MissingParameter | The CasId parameter is required. | The CasId parameter is missing. | |
| 400 | CertId.MissingParameter | The parameter CertId is required. | The required parameter CertId is missing. | |
| 400 | Certificate.Duplicated | The certificate name already exists. | The certificate is duplicated. | |
| 400 | Certificate.MissingParameter | The Certificate parameter is required. | Missing Certificate parameter. | |
| 404 | Certificate.NotFound | The specified certificate does not exist. | The specified certificate does not exist. | |
| 400 | Certificate.StatusError | The status of the certificate is invalid. | The specified certificate status is invalid. | |
| 400 | CertificateDomainNotMatchSite | The domain name in the specified certificate does not match the site. | The domain name in the certificate does not match the current site. | |
| 400 | CertificateNotMatchPrivateKey | The specified certificate does not match the private key. | The specified certificate and private key do not match. | |
| 400 | CertList.NotFound | The specified CertList does not exist. | The queried certificate list does not exist. | |
| 400 | CertQuotaCheckFailed | The custom certificate quota verification failed. The number of uploaded certificates exceeds the upper limit allowed for the plan. | The custom certificate quota verification failed. The number of uploaded certificates exceeds the upper limit allowed for the plan. | |
| 400 | CheckCertificateQuotaFailed | Failed to query the quota of free certificates. Try again later. | Failed to query the quota of free certificates. Try again later. | |
| 400 | CheckCertificateQuotaFailed | Failed to query the number of used free certificates. Try again later. | Failed to query the number of used free certificates. Try again later. | |
| 400 | CheckOrderFailed | Invalid order parameter. | Invalid order parameter. | |
| 400 | CheckPlanFailed | Invalid plan name or code. Check and try again. | Invalid plan name or code. Check and try again. | |
| 400 | ClientCertificate.OverLimit | You are allowed to create 20 client certificates at most under current site. | You are allowed to create 20 client certificates at most under current site. | |
| 400 | CloudUserCannotBuyNotInnerCommodity | No group cloud product label, can not be purchased. | No group cloud product label, can not be purchased. | |
| 400 | CodeVersionInUse | Failed to delete the code version because it is being used. Before you delete it, roll back to the previous version. | Failed to delete the code version because it is being used. Before you delete it, roll back to the previous version. | |
| 400 | CodeVersionNumberExceedQuotaLimit | The maximum number of code versions in your plan has been reached. Check your plan quota and upgrade the plan to request a quota increase. | The maximum number of code versions in your plan has been reached. Check your plan quota and upgrade the plan to request a quota increase. | |
| 400 | CompileRuleError | Rule compilation failed, please check the rule information passed in to ensure that the rule is written according to the syntax described in the document. | Rule compilation failed. Check the incoming rule configuration. For details, see the rule configuration format described in the interface document. | |
| 400 | ConfExceedLimit | The number of function configurations exceeds the limit. Please check the interface document to see the number of configurations that can be supported by a single function. | The number of configuration items for the current function has exceeded the upper limit set by the system. | |
| 400 | ConfigConflicts | Configuration conflicts, usually when multiple configurations are configured under the same function of the same site, such as duplicate rule names between multiple configurations. | The parameter uniqueness check failed. Check for duplicate parameter values. | |
| 400 | ContainForbiddenLabelError | Placing an order is blocked due to an applied restriction label. | There is a label that prohibits placing an order and cannot place an order. | |
| 403 | CreateESASlsProjectFailed | Failed to create the task that delivers real-time logs to SLS. Check your configurations and try again. | Failed to create the task that delivers real-time logs to SLS. Check your configurations and try again. | |
| 400 | CreateFunctionFailed | The configuration of the new site function failed. Please check the CreateSiteFunction interface document and check the parameters. | The configuration of the new site function failed. Please check the CreateSiteFunction interface document and check the parameters. | |
| 400 | CreateRealTimeLogSlrError | You do not have permissions to create a service-linked role.Contact your account administrator to attach the AliyunServiceRoleForESARealtimeLogPushSLS policy or a custom policy that grants permissions to create a service-linked role to the current user.Service: <"/><"/>esarealtimelogpushsls.dcdnservices.aliyuncs.com<"/><"/>. | You do not have permissions to create a service-linked role.Contact your account administrator to attach the AliyunESAFullAccess policy or a custom policy that grants permissions to create a service-linked role to the current user.Service: <"/><"/>esarealtimelogpushsls.dcdnservices.aliyuncs.com<"/><"/>. | |
| 400 | CreateTimeError | The effective time of the same policy template cannot overlap. | The effective time of the same policy template cannot overlap. | |
| 400 | DependedByOthers | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact technical support. | |
| 400 | DnsSecDenied | Only sites accessed by NS can enable DNSSEC. | Only sites accessed by NS can enable the DNSSEC function. | |
| 403 | Domain.NotSupport.Waf | Failed to enable WAF for the domain due to incompatible scheduling domain configurations or properties. Check and adjust your configurations and try again. If the problem persists, contact technical support. | Failed to enable WAF for the domain due to incompatible scheduling domain configurations or properties. Check and adjust your configurations and try again. If the problem persists, contact technical support. | |
| 400 | DomainInRiskList | The domain you added may be at risk. If you have any questions, please submit a ticket. | The domain name you added may be at risk. If you have any questions, please submit a work order. | |
| 400 | DomainNameOverLimit | A maximum of 500 domains are supported for each request. | Only 500 domain names are supported at a time. Please reduce the number of domain names to request again. | |
| 400 | DuplicateRequirementTicket | Repeated demand order. | Repeated demand order. | |
| 400 | EdgeContainer.HasOpened | You have already activated Edge Container. | You have already activated Edge Container. | |
| 400 | EdgePortsOverlap | There is overlap between multiple edge ports, please check and try again after modification. | There is overlap between multiple edge ports, please check and try again after modification. | |
| 400 | EnterpriseAmountErr | Enterprise plans do not support bulk purchase. | Enterprise plans do not support bulk purchase. | |
| 400 | ErrSiteIdNoteEnterprise | This feature is unavailable because your website is not associated with an Enterprise plan. Upgrade your plan to Enterprise. | This feature is unavailable because your website is not associated with an Enterprise plan. Upgrade your plan to Enterprise. | |
| 400 | ErService.HasOpened | You have already activated Edge Routine. | You have already activated Edge Routine. | |
| 403 | ErService.NotOpen | Er service has not opend. | Er service has not opend. | |
| 403 | EsaService.NotOpen | ESA service has not opend. | Edge Security Accelerator (ESA) is not turned on | |
| 400 | ExceedFileUpload | The size of the uploaded file exceeds the upper limit. Select a file less than 10 MB. | The size of the uploaded file exceeds the upper limit. Select a file less than 10 MB. | |
| 403 | Expression.Invalid | Expression syntax error or data type mismatched. | Expression syntax error or data type mismatched. | |
| 403 | Expression.Invalid | The specified expression is invalid: %s. | The specified expression is invalid. | |
| 403 | Forbidden | You are not authorized to operate this resource, or this API does not support RAM. | You are not authorized to operate this resource, or this API does not support RAM. | |
| 400 | FunctionConflict | The feature configuration conflicts. Sites with version management enabled cannot configure this feature. | The currently configured function conflicts with other functions. If you need to configure, delete the conflicting function configurations first. | |
| 400 | FunctionQuotaCheckFailed | The quota verification for this function fails. It may be that the configuration of this function exceeds the limit of the site plan. Please check the plan introduction document corresponding to this site. | The current plan does not support the configuration of restricted functions, please check the plan related function description. | |
| 400 | HostnameNumberExceedLimit | The maximum number of hostnames associated with the CA certificate you specified has been reached. | The number of domain names bound to CA certificates exceeds the limit. A maximum of 50 domain names can be bound to each CA certificate. | |
| 400 | Id.MissingParameter | The parameter Id is required. | The required parameter Id is missing. | |
| 400 | IllegalOperation.VersionManagement | The version management operation failed because incompatible features or environment settings are configured. Adjust your configurations and try again. | The version management operation failed because incompatible features or environment settings are configured. Adjust your configurations and try again. | |
| 400 | Instance.NotOnline | Your plan is unavailable due to an overdue payment. Complete the payment first. | Your plan is unavailable due to an overdue payment. Complete the payment first. | |
| 400 | Instance.ReleaseFailed | Instance release failed. | Instance release failed. | |
| 400 | Instance.UpdateSpecError | The security instance can only be changed after 31 days of purchase, and can only be changed once a natural month. | The security instance can only be changed after 31 days of purchase, and can only be changed once a natural month. | |
| 400 | InstanceNotExist | The instance does not exist. Check whether the specified instance ID is correct or whether the instance belongs to your account. | The instance does not exist. Check whether the specified instance ID is correct or whether the instance belongs to your account. | |
| 400 | InsufficientAvailableQuota | Your account balance is insufficient. | Your account is in arrears, please pay the arrears before purchasing. | |
| 400 | InsufficientBalance | Your account balance is insufficient. | Your account balance is insufficient, please recharge before purchasing. | |
| 400 | InternalError | An internal exception occurred, please try again later. | An inner exception was triggered. Please try again later. | |
| 500 | InternalError | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact technical support. | |
| 400 | InternalException | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact technical support. | |
| 400 | InternalOperationError | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact technical support. | |
| 400 | Invalid.Parameter | Invalid request parameters for querying standard logs. Check and try again. | Invalid request parameters for querying standard logs. Check and try again. | |
| 400 | Invalid.Value | Invalid value in the key-value pair. Make sure the value is Base64-encoded. | Invalid value in the key-value pair. Make sure the value is Base64-encoded. | |
| 400 | InvalidAccount.Malformed | The specified account is invalid. | The account number is not entered correctly, for example, the input is empty. | |
| 404 | InvalidAccount.NotFound | The specified account does not exist. | The specified account does not exist. | |
| 404 | InvalidApp.NotFound | The application does not exist. Check whether the application ID you specified is correct and try again. | The application does not exist. Check whether the application ID you specified is correct and try again. | |
| 400 | InvalidArgName | The parameter name does not exist, please check the function interface document. | The parameter name does not exist, please check the function interface document. | |
| 400 | InvalidCertificate.NotFound | The specified certificate does not match the website. Check the validity of the certificate and try again. | The specified certificate does not match the website. Check the validity of the certificate and try again. | |
| 400 | InvalidComponent | The order parameters is invalid. | The order parameters is invalid. | |
| 400 | InvalidConfigId | The input configuration ID: ConfigId it does not exist, query the existing configuration and its valid ConfigId through the ListSiteFunction. | The ConfigId does not exist. | |
| 400 | InvalidEndTime.Malformed | The specified EndTime is invalid. | Please provide the correct end time format. The date format follows ISO8601 notation and uses UTC time. The format is: yyyy-MM-ddTHH:mm:ssZ. | |
| 400 | InvalidEndTime.Mismatch | The specified EndTime is earlier than the StartTime. | The end time you entered is earlier than the start time. Please check and try again. | |
| 400 | InvalidExecution.CountFull | The maximum number of prefetch plans has been reached. Delete some completed tasks and try again. | The maximum number of prefetch plans has been reached. Delete some completed tasks and try again. | |
| 404 | InvalidExecution.NotFound | The execution plan does not exist. Check whether the parameters such as the execution ID, start time, and end time are correct. | The execution plan does not exist. Check whether the parameters such as the execution ID, start time, and end time are correct. | |
| 400 | InvalidFunctions.Malformed | The specified Functions is invalid. | The specified configuration is invalid. | |
| 400 | InvalidInstance | The instance ID is missing or invalid. Make sure that the instance ID is valid and try again. | The instance ID is missing or invalid. Make sure that the instance ID is valid and try again. | |
| 400 | InvalidJob.JobCountOfSiteFull | The maximum number of prefetch tasks for the website has been reached. Delete some unwanted ones and try again. | The maximum number of prefetch tasks for the website has been reached. Delete some unwanted ones and try again. | |
| 404 | InvalidJob.NotFound | The task does not exist. Check whether the task ID is correct or whether the task has been deleted. | The task does not exist. Check whether the task ID is correct or whether the task has been deleted. | |
| 403 | InvalidKey.ExceedsCapacity | The maximum storage capacity of the Edge KV namespace has been reached. Delete unwanted key-value pairs to save the storage. | The maximum storage capacity of the Edge KV namespace has been reached. Delete unwanted key-value pairs to save the storage. | |
| 403 | InvalidKey.ExceedsCapacity | The maximum capacity of a single namespace cannot exceed 1 GB. | The capacity of the storage space exceeds the limit. | |
| 400 | InvalidKey.ExceedsMaximum | The size of the key cannot exceed 512 bytes. | The length of the requested key is too large. | |
| 400 | InvalidKey.Malformed | The specified key is invalid. | Key name input error, such as entering an empty string. | |
| 404 | InvalidKey.NotFound | The specified key does not exist. | The specified key-value pair does not exist. | |
| 406 | InvalidKey.QuotaFull | The total number of IP exceeds the quota. | The total number of ip addresses exceeds the quota. | |
| 400 | InvalidKey.TooManyDimensions | Request contains too many dimensions. | Request contains too many dimensions. For more information, see OpenAPI Documentation . | |
| 406 | InvalidNameSpace.Duplicate | The specified namespace already exists. | Specified storage space | |
| 400 | InvalidNameSpace.Malformed | The specified namespace is invalid. | The bucket name is entered incorrectly, such as an empty string. | |
| 404 | InvalidNameSpace.NotFound | The specified namespace does not exist. | ||
| 406 | InvalidNameSpace.QuotaFull | The maximum number of namespaces is exceeded. | The number of storage spaces exceeds the capacity limit. | |
| 400 | InvalidNextToken | The specified parameter NextToken is invalid. | The parameter NextToken is illegal. | |
| 400 | InvalidPageSize.ValueNotSupported | The PageSize value is invalid. The default value is set to 20. The acceptable range is between 1 and 500. | The request PageSize value is invalid. The default value is 20 and the value range is 1-500. | |
| 400 | InvalidParameter | Invalid parameter. Check the parameter configuration. | Invalid parameter. Check the parameter configuration. | |
| 400 | InvalidParameter | Parameter verification failed. Check your configurations and try again. | Parameter verification failed. Check your configurations and try again. | |
| 400 | InvalidParameter | The specified parameter is invalid. | The specified parameter is invalid. | |
| 400 | InvalidParameter.AddressConflict | Duplicate origin addresses. Make sure that each origin address for the same pool is unique. | Duplicate origin addresses. Make sure that each origin address for the same pool is unique. | |
| 400 | InvalidParameter.ApiItems.Api | The parameter apiItems api is invalid. | The parameter apiItems api is invalid. | |
| 400 | InvalidParameter.ApiItems.Host | The parameter apiItems host is invalid. | The parameter apiItems host is invalid. | |
| 400 | InvalidParameter.ApiShield.Quota | This website does not have the permission to view API security features. | This website does not have the permission to view API security features. | |
| 400 | InvalidParameter.appid | The format of the application ID is invalid. You can call ListEdgeContainerApps to obtain the application ID. | The format of the application ID is invalid. You can call ListEdgeContainerApps to obtain the application ID. | |
| 400 | InvalidParameter.Appid | The format of the application ID is invalid. You can call ListEdgeContainerApps to obtain the application ID. | The format of the input application ID is incorrect. You can use the ListEdgeContainerApps API to obtain the application ID. | |
| 400 | InvalidParameter.ArgName | Invalid ArgName. Check your website configuration parameters and make sure that they match the supported features and parameter names listed in the official documentation. | Invalid ArgName. Check your website configuration parameters and make sure that they match the supported features and parameter names listed in the official documentation. | |
| 400 | InvalidParameter.ArgValue | Invalid parameter value. Check whether the value format and length meet the requirements. | Invalid parameter value. Check whether the value format and length meet the requirements. | |
| 400 | InvalidParameter.ClientIpPassThroughMode | Invalid client IP transfer protocol, please refer to the interface document and pass in valid parameters. | Invalid client IP transfer protocol, please refer to the interface document and pass in valid parameters. | |
| 400 | InvalidParameter.CnameSiteRecordNoProxied | A non-proxied record was added for a website using a CNAME setup. | A non-proxied record was added for a website using a CNAME setup. | |
| 400 | InvalidParameter.CnameSiteRecordUnsupport | The current record type is not supported for a website connected by CNAME setup. | You can only add A/AAAA and CNAME records to a website connected by CNAME setup. | |
| 400 | InvalidParameter.ConfigIds | Invalid ConfigId. Specify an existing Configld and make sure it is in the valid format. | Invalid ConfigId. Specify an existing Configld and make sure it is in the valid format. | |
| 400 | InvalidParameter.Configs | Invalid parameter configurations. Check whether your feature configurations are in the valid format and comply with relevant requirements. | Invalid parameter configurations. Check whether your feature configurations are in the valid format and comply with relevant requirements. | |
| 400 | InvalidParameter.Coverage | The selected location is unavailable in your plan. Change the location to one that is covered by the plan and try again. | The selected location is unavailable in your plan. Change the location to one that is covered by the plan and try again. | |
| 400 | InvalidParameter.Dimension | The specified Dimension is invalid. | The specified Dimension is invalid. For more information, see OpenAPI Documentation . | |
| 400 | InvalidParameter.DomainNotBelongingUser | The domain name passed in does not belong to the current user. | The domain name passed in does not belong to the current user. | |
| 400 | InvalidParameter.Domains | Duplicate domain names are specified for parameter Domains. Remove one of them and try again. | The number of domain names in the Domains parameter exceeds the quota. Specify valid values and try again. The upper limit is 50 for lets_encrypt, 1 for digicert_single, and 1 for digicert_wildcard. | |
| 400 | InvalidParameter.Domains | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. | |
| 400 | InvalidParameter.Domains | You have already submitted a certificate application for the domain name. | You have already submitted a certificate application for the domain name. | |
| 400 | InvalidParameter.Domains | One or more domain names specified by parameter Domains do not belong to the current website. Check and try again. | One or more domain names specified by parameter Domains do not belong to the current website. Check and try again. | |
| 400 | InvalidParameter.Domains | The domain specified in Domains parameter is not a valid domain name, please check and try again. | Domains there is an invalid domain name in the parameter, please check and try again. | |
| 400 | InvalidParameter.Domains | The site you configured is currently accessed in the CNAME mode. Please switch to the NS mode and try again. | The site you configured is currently accessed in the CNAME mode. Please switch to the NS mode and try again. | |
| 400 | InvalidParameter.Domains | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. The upper limit of lets.encrypt type domain name is 50, the upper limit of digicert.single type domain name is 10, and the upper limit of digicert.wildcard type domain name is 1. | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. The upper limit of lets_encrypt type domain name is 50, the upper limit of digicert_single type domain name is 10, and the upper limit of digicert_wildcard type domain name is 1. | |
| 400 | InvalidParameter.Domains | The site which is configured in CNAME mode does not support wildcard domain certificate application. | The CNAME site does not support applying for a free certificate for wildcard domain names. | |
| 400 | InvalidParameter.DomainsExceedLimit | The number of incoming domain names exceeds the maximum limit. | The number of incoming domain names exceeds the maximum limit. | |
| 400 | InvalidParameter.DomainSourceTypeNotSupport | The underlying source type of the domain is not supported. | The underlying origin type of the domain name is not supported. | |
| 400 | InvalidParameter.EmptyAKSK | AK,SK information cannot be empty. | AK,SK information cannot be empty. | |
| 400 | InvalidParameter.EndpointId | The parameter EndpointId is invalid. | The parameter EndpointId is invalid. | |
| 400 | InvalidParameter.ExistedHandlingTask | There is a task in process, waiting for execution to complete. | There is a task in process, waiting for execution to complete. | |
| 400 | InvalidParameter.Field | The specified Field is invalid. | The specified Field is invalid. For more information, see OpenAPI Documentation . | |
| 400 | InvalidParameter.FunctionName | The specified feature does not exist. Specify a valid feature name based on the related documentation. | The specified feature does not exist. Specify a valid feature name based on the related documentation. | |
| 400 | InvalidParameter.FuzzySearch | The parameter fuzzySearch is invalid. | The parameter fuzzySearch is invalid. | |
| 400 | InvalidParameter.HealthCheckFailTimes | Specified parameter HealthCheckFailTimes is not valid. | Parameter HealthCheckFailTimes format is incorrect. | |
| 400 | InvalidParameter.HealthCheckHost | Specified parameter HealthCheckHost is not valid. | Parameter HealthCheckHost format is incorrect. | |
| 400 | InvalidParameter.HealthCheckHttpCode | Specified parameter HealthCheckHttpCode is not valid. | Parameter HealthCheckHttpCode format is incorrect. | |
| 400 | InvalidParameter.HealthCheckInterval | Specified parameter HealthCheckInterval is not valid. | Parameter HealthCheckInterval format is incorrect. | |
| 400 | InvalidParameter.HealthCheckMethod | Specified parameter HealthCheckMethod is not valid. | Parameter HealthCheckMethod format is incorrect. | |
| 400 | InvalidParameter.HealthCheckPort | Specified parameter HealthCheckPort is not valid. | Parameter HealthCheckPort format is incorrect. | |
| 400 | InvalidParameter.HealthCheckSuccTimes | Specified parameter HealthCheckSuccTimes is not valid. | Parameter HealthCheckHost format is incorrect. | |
| 400 | InvalidParameter.HealthCheckTimeout | Specified parameter HealthCheckTimeout is not valid. | Parameter HealthCheckTimeout format is incorrect. | |
| 400 | InvalidParameter.HealthCheckType | Specified parameter HealthCheckType is not valid. | Parameter HealthCheckType format is incorrect. | |
| 400 | InvalidParameter.HealthCheckURI | Specified parameter HealthCheckURI is not valid. | Parameter HealthCheckURI format is incorrect. | |
| 400 | InvalidParameter.HttpHeaders | The specified HttpHeaders is invalid. Please check the HttpHeaders parameter. Please make the necessary changes and call the interface again. | The HttpHeaders parameter is invalid. Please check whether the HttpHeaders parameter is filled in. The parameter cannot contain @. | |
| 400 | InvalidParameter.Image | The specified Image is invalid. Please check the Image parameter and make the necessary modifications and call the interface again. | Illegal Image parameter. Please check the Image parameter, which cannot be assigned to illegal characters such @. | |
| 400 | InvalidParameter.InvalidBiz | the value of the business type is empty or the incoming parameter is invalid. | The value of the business type is empty or the incoming parameter is invalid. | |
| 400 | InvalidParameter.InvalidBiz | The incoming parameter value of the business type is empty or incorrect. | The incoming parameter value of the business type is empty or incorrect. | |
| 400 | InvalidParameter.InvalidDSRecordName | Please add/import an NS record with the same name before adding this DS record. | Please add/import an NS record with the same name before adding this DS record | |
| 400 | InvalidParameter.InvalidHostPolicy | The host parameter in the origin fetch request is invalid. | The host parameter in the origin fetch request is invalid. | |
| 400 | InvalidParameter.InvalidRecordName | The record name you entered does not meet the specifications. Change the record name according to the product documentation. | The record name you entered does not meet the specifications. Please adjust the record name according to the product documentation. | |
| 400 | InvalidParameter.InvalidRecordName | The DNS record name you entered does not meet the required specifications. Please adjust the record name according to the product documentation. | The record name you entered does not meet the specifications. Please adjust the record name according to the product documentation. | |
| 400 | InvalidParameter.InvalidRecordNameSuffix | If you add other records, the suffix of the host record must be the same as the site name. | If you add another record, the suffix of the host record must be the same as the site name. Please adjust and try again. | |
| 400 | InvalidParameter.InvalidSiteEnvironmentName | The specified site environment name is invalid. | The specified site environment name is invalid. | |
| 400 | InvalidParameter.InvalidVanityNSName | A vanity nameserver must be an absolute domain name. Correct it and try again. | You need to enter the full domain name to customize the NS name. Please adjust and submit it again. | |
| 400 | InvalidParameter.InvalidVanityNSNum | Enter 2 to 5 vanity nameservers. Correct them and try again. | Custom NS requires 2~5 names, please adjust and resubmit. | |
| 400 | InvalidParameter.LoadBalancerNameInvalid | Invalid load balancer name. Make sure that you specify a valid subdomain name under your website domain for the load balancer. | Invalid load balancer name. Make sure that you specify a valid subdomain name under your website domain for the load balancer. | |
| 400 | InvalidParameter.MethodFilter | The parameter methodFilter is invalid. | The parameter methodFilter is invalid. | |
| 400 | InvalidParameter.Name | The specified Name is invalid. Please check the Name parameter, which must be between 6 and 128 characters. Kindly make the necessary modifications and call the interface again. | The Name parameter is not valid. Check the Name parameter, which is between 6 and 128 characters. After modification, call the interface again. | |
| 400 | InvalidParameter.NotFoundDomain | The incoming domain name or some domain names cannot be found based on the user and product type. | The incoming domain name or some domain names cannot be found based on the user and product type. | |
| 400 | InvalidParameter.NotMatchedCoverage | The domain name and the coverage of the site are inconsistent. | The domain name and the acceleration area of the site are inconsistent. | |
| 400 | InvalidParameter.NotMatchedRootDomain | The domain name does not match the root domain name information for the site. | The domain name does not match the root domain name information for the site. | |
| 400 | InvalidParameter.NotSupportedDomainBiz | The business type of the domain name is not supported. | The business type of the domain name is not supported. | |
| 400 | InvalidParameter.NotSupportedDomainStatus | The status of the domain name is not allowed. | The status of the domain name is not allowed. | |
| 400 | InvalidParameter.NotSupportedMultiChannelDomain | The multi-channel domain are not supported. | Multi-channel domain names are not supported. | |
| 400 | InvalidParameter.NotSupportVendor | Do not support the vendor, please select the vendor supported. | Do not support the vendor, please select the vendor supported. | |
| 400 | InvalidParameter.ObjectId | Invalid task ID or execution plan ID. | Invalid task ID or execution plan ID. | |
| 400 | InvalidParameter.ObjectsAndSiteIds | The specified Objects and SiteIds variables cannot both be empty strings. | The specified Objects and SiteIds variables cannot both be empty strings. | |
| 400 | InvalidParameter.OrderKey | The specified OrderKey is invalid. Please check the OrderKey parameter. | The OrderKey parameter is invalid. Please check the OrderKey parameter, as it cannot be assigned illegal characters such as @, #, % etc. Please make the necessary modifications and call the interface again. | |
| 400 | InvalidParameter.OrderType | The specified OrderType is invalid. Please check the OrderType parameter. You may not have set it to either Asc or Desc. Please make the necessary changes and call the interface again. | The OrderType parameter is invalid. Please check the OrderType parameter. You may not have set it to Asc or Desc. Please modify it and call the interface again. | |
| 400 | InvalidParameter.PageNumber | Failed to verify parameter PageNumber.Check whether the parameter exists and is set to a positive integer. | Failed to verify parameter PageNumber.Check whether the parameter exists and is set to a positive integer. | |
| 400 | InvalidParameter.Percentage | The Percentage parameter is invalid. Please check the Percentage parameter, which should be in the range of 1-100. Modify it accordingly and call the interface again. | The Percentage parameter is invalid. Check the Percentage parameter. The parameter range is 1-100. Modify the parameter and call the interface again. | |
| 400 | InvalidParameter.Port | Invalid edge port or origin port. Enter a valid port as required in the interface document. | The port is invalid. Specify a valid port as described in the API documentation. | |
| 400 | InvalidParameter.Protocol | Invalid port protocol. Enter a valid port protocol as required by the interface documentation. | Invalid port protocol. Enter a valid port protocol as required by the interface documentation. | |
| 400 | InvalidParameter.PublishEnv | The specified PublishEnv is invalid. Please check the PublishEnv parameter. It may not be set to either "prod" or "staging." Please make the necessary changes and call the interface again. | The PublishEnv parameter is invalid. Please check the PublishEnv parameter. You may not have set it to prod or staging one of them. Please modify it and call the interface again. | |
| 400 | InvalidParameter.RecordCommentExceedLimit | The number of incoming record comment exceeds the maximum limit. | The record comment information is greater than 50 characters. | |
| 400 | InvalidParameter.RecordData | Invalid record content. Adjust your configurations based on the API documentation. | Invalid record content. Adjust your configurations based on the API documentation. | |
| 400 | InvalidParameter.RecordNameExceedLimit | The length of the record name exceeds the maximum limit. | The record name cannot exceed 200 characters. | |
| 400 | InvalidParameter.RecordNotBelongToSite | The record name passed in does not belong to the current site. | The record name passed in does not belong to the current site. | |
| 400 | InvalidParameter.RecordsExceedLimit | The number of incoming records exceeds the maximum limit. | The number of incoming records exceeds the maximum limit. | |
| 400 | InvalidParameter.RecordType | Invalid record type. Adjust your configurations based on the API documentation. | Invalid record type. Adjust your configurations based on the API documentation. | |
| 400 | InvalidParameter.RuleSource | The origin of the forwarding rule does not exist or is invalid. Enter the correct origin and try again. | The origin of the forwarding rule does not exist or is invalid. Enter the correct origin and try again. | |
| 400 | InvalidParameter.SiteEnvironmentRuleDuplicate | The specified site environment rule is the same as an existing environment. | The specified site environment rule is the same as an existing environment. | |
| 400 | InvalidParameter.SiteId | Failed to query the website based on the SiteID you specified. Check parameter SiteId and try again. | Failed to query the website based on the SiteID you specified. Check parameter SiteId and try again. | |
| 400 | InvalidParameter.SiteId | The specified SiteId is invalid. | The specified SiteId is invalid.Check parameter SiteId and try again. | |
| 400 | InvalidParameter.SiteName | Invalid website name. Specify a valid name that contains letters and digits and does not contain special characters. | Invalid website name. Specify a valid name that contains letters and digits and does not contain special characters. | |
| 400 | InvalidParameter.SiteVersionDescExceedLimit | The specified site version description exceeds the maximum length. | The specified site version description exceeds the maximum length. | |
| 400 | InvalidParameter.StateFilter | The parameter stateFilter is invalid. | The parameter stateFilter is invalid. | |
| 400 | InvalidParameter.TagValue | The specified TagValue is invalid. | The TagValue parameter is invalid. | |
| 400 | InvalidParameter.TimeRange | The specified time range exceeds the limit. Adjust it and try again. | The specified time range exceeds the limit. Adjust it and try again. | |
| 400 | InvalidParameter.Type | The specified Type parameter is invalid, please check and try again. | The Type parameter is invalid. Valid values for certificate application Type: lets_encrypt, digicert_single, and digicert_wildcard. | |
| 400 | InvalidParameter.UnSatisfiedDomainSources | The basic origin sources of the domain is not satisfied. | The basic origin information of the domain name does not meet the requirements. | |
| 400 | InvalidParameter.VanityNSNameDuplicate | The vanity nameservers are duplicated. Please delete it and try again. | Duplicate custom NS names exist. Delete the duplicate names and resubmit. | |
| 400 | InvalidParameter.VersionId | The specified VersionId is invalid. Please check the VersionId parameter. You may not have entered the parameter or the parameter does not start with ver-string. Please modify it and call the interface again. | The VersionId parameter is invalid. The VersionId parameter may not be specified or may not start with the ver- prefix. Modify the parameter and call the operation again. | |
| 400 | InvalidParameters | The specified parameters are invalid. | The parameter is invalid. | |
| 400 | InvalidParameters.InvalidUrls | The specified urls are invalid. | The URL parameter in the request is invalid. | |
| 400 | InvalidParameter_ApiItems_Api | The parameter apiItems api is invalid. | The api parameter in apiItems is invalid. | |
| 400 | InvalidParameter_ApiItems_Host | The parameter apiItems host is invalid. | The host parameter in apiItems is invalid. | |
| 400 | InvalidParameter_ApiShieldQuota | This website does not have the permission to view API security features. | You do not have the permission to view the API security feature for this site. | |
| 400 | InvalidParameter_EndpointId | The EndpointId is invalid. | The EndpointId parameter is invalid. | |
| 400 | InvalidParameter_FuzzySearch | The parameter fuzzySearch is invalid. | The fuzzySearch parameter is invalid. | |
| 400 | InvalidParameter_MethodFilter | The parameter methodFilter is invalid. | The methodFilter parameter is invalid. | |
| 400 | InvalidParameter_StateFilter | The parameter stateFilter is invalid. | The stateFilter parameter is invalid. | |
| 400 | InvalidRegionId.Malformed | The specified RegionId is invalid. | The RegionId parameter is invalid. | |
| 404 | InvalidResourceId.NotFound | The specified resource does not exist or is released. | The resource does not exist or has been released. | |
| 400 | InvalidRoutine | The name of routine is invalid. | The Edge Routine name is invalid. | |
| 400 | InvalidSiteICP | The specified website does not have an ICP filing or the filing information is invalid. Make sure your website is filed and try again. | The site you configured has not obtained an China Internet Content Provider (ICP) filing or the ICP filing information is invalid. Make sure that the site has obtained an ICP filing and try again. | |
| 400 | InvalidSiteName | Invalid website name. Check and try again. | The site name you configured is incorrect. Specify the correct site name and try again. | |
| 400 | InvalidSSLPri | The specified PrivateKey is invalid. | The PrivateKey is incorrect. Specify the correct PrivateKey. | |
| 400 | InvalidSSLPub | The specified Certificate is invalid. | The Certificate is incorrect. Specify the correct certificate. | |
| 400 | InvalidStartTime.Malformed | The specified StartTime parameter is invalid. | Specify the correct format for the start time. The date format follows the ISO 8601 standard and uses UTC. Format: yyyy-MM-ddTHH:mm:ssZ. | |
| 400 | InvalidStartTime.ValueNotSupported | The StartTime cannot exceed 31 days before the current time. | The StartTime request parameter cannot be more than 31 days earlier than the current time. | |
| 400 | InvalidStationParameter | The specified Station is invalid. | The specified node parameter is invalid. | |
| 400 | InvalidTaskId.Malformed | The specified taskId is invalid. | The specified task ID is invalid. | |
| 400 | InvalidTime | The query time cannot exceed the last 3 days. | The query time range cannot exceed the last 3 days. | |
| 400 | InvalidTime.Malformed | Specified start time or end time is malformed. | The time format you specified is incorrect. The time must be in the yyyy-MM-ddTHH:mm:ssZ format. Specify the correct format and try again. | |
| 403 | InvalidUid.PermissionDenied | You do not have the permissions to perform this operation on this resource. Check whether the specified UID is correct and has the required permissions. | You are not authorized to operate on this resource. Make sure that the UID is correct and has the required permissions. | |
| 400 | InvalidValOfDelHeader | The delete header operation does not support setting value. | The delete header operation does not support setting a value. | |
| 400 | InvalidValue.ExceedsMaximum | The size of the value cannot exceed 2,000,000 bytes. | The value to store is too large. | |
| 400 | InvalidVersion.NotFound | The version does not exist. | The specified version number does not exist. | |
| 400 | IpaNotActive | The ipa application is not active. | The application is being deployed. | |
| 400 | IpaResourceUnavailable | The resource is unavailable. | Insufficient resources are available for the new Website Config. | |
| 403 | List.BeingBound | The specified list is being bound. | The specified list is bound to one or more protection rules. | |
| 403 | List.Name.AlreadyExist | The specified list name already exists. | The specified list name already exists. | |
| 403 | List.NotExist | The specified list does not exist. | The specified list does not exist. | |
| 400 | LoadBalancerHealthDetectionIntervalCheckFailed | The configured load balancer health detection interval exceeds the quota range allowed by the plan. Please revise the interval within the range or upgrade the plan and try again. | The health check detection time interval configured for the load balancing health check exceeds the quota allowed by your plan. Adjust the interval to a value within the allowed range or upgrade your plan, and then retry. | |
| 400 | LoadBalancerHealthDetectionQuotaCheckFailed | Your current plan does not allow you to configure the load balancer's health detection. Upgrade the plan and try again. | Your current plan does not support configuring load balancing health checks. Upgrade your plan and retry. | |
| 400 | LoadBalancerNameConflict | The load balancer name or the hostname for the origin pool already exists. Try again with a unique name. | The load balancing name or origin IPAM pool record name already exists. Use a unique name and retry. | |
| 400 | LoadBalancerNotExist | The specified load balancer name is invalid or load balancing is not enabled for your website.Make sure that you specify a valid load balancer name and load balancing is enabled. Then, try again. | The specified site load balancer is invalid or the load balancing feature has not been activated for the site. Verify that the load balancer name is correct and try again. If the load balancing feature has not been activated, activate it and try again. | |
| 400 | LoadBalancerNotExist | The load balancer does not exist. | The specified load balancing ID does not exist. Confirm the ID and retry. | |
| 400 | LoadBalancerNumberExceedQuotaLimit | The number of load balancers you have added has reached the limit of the plan quota. Please delete the unused load balancers or upgrade the plan and try again. | The number of load balancing instances you added has reached the quota limit of your plan. Delete unused load balancing instances or upgrade your plan, and then retry. | |
| 400 | LoadBalancerPolicyCheckFailed | Your current plan does not support the load balancer scheduling policy. Upgrade the plan and try again. | Your current plan does not support this load balancing scheduling policy. Upgrade your plan and retry. | |
| 400 | LoadBalancerQuotaCheckFailed | Load balancer enable quota check failed. | Your current plan does not support load balancing features. To use these features, upgrade your plan. | |
| 400 | LoadBalancerRuleQuotaCheckFailed | Your current plan does not support configuring load balancer custom rules, or the load balancer rules you have added exceed the plan quota limit. Please upgrade the plan or delete the rules that are no longer in use and try again. | Your current plan does not support custom load balancing rules, or the number of load balancing rules you have added exceeds the plan quota limit. Upgrade your plan or delete unused rules and retry. | |
| 400 | LockFailed | The system is handling requests you previously submitted. Try again later. | Another request is being processed. Try again later. | |
| 404 | LogNotFound | Failed to query the log. Check whether the task ID and execution ID are valid. | No logs found. Verify that the task ID, execution ID, and other parameters are correct and valid. | |
| 403 | LogserviceNotFound | Log Service has not been activated. | The real-time log service is not activated. | |
| 404 | LogstoreNotExist | Logstore does not exist. | The Logstore does not exist. | |
| 403 | ManagedRulesGroup.BeingBound | Failed to delete the WAF managed rule group because it has been associated with one or more rules. Disassociate the rules and try again. | You cannot delete this WAF managed rule group because it is currently associated with other rules. Disassociate it from the rules before deleting it. | |
| 403 | ManagedRulesGroup.Name.Invalid | Invalid name for the WAF managed rule group. Try again with a valid name. | The WAF managed rule group name you entered is invalid. Enter a valid name and try again. | |
| 403 | ManagedRulesGroup.NotExist | The specified WAF managed rule group does not exist or is not recognized by the system. Make sure that you specify a correct WAF managed rule group ID and that the rule group has been created. | The specified WAF managed rule group does not exist or is not recognized by the system. Make sure the identifier is correct and verify that the creation process was successful. | |
| 403 | Match.Malformed | The specified parameter match is malformed or does not adhere to the required format. | The specified Match parameter is in an incorrect format or does not conform to the required format. Check the rule configuration for syntax errors or structural inconsistencies and correct them to conform to the expected configuration schema. | |
| 400 | MigrateTask.SpecificFunctionNotFound | When importing domain name configurations, you need to pass in the specific feature configurations, but they are not received. | Specific feature configurations are required when importing domain name configurations, but they were not provided. | |
| 400 | MigrateTask.Unsupported | The following conditions are not supported in the migration task: 1. Unadapted vendors do not support it for the time being 2. Non-API mode, does not support repeated execution 3. Tasks that are not successful, failed or partially failed are not supported for repeated execution. Check and re-execute according to the prompt message. | The following scenarios are not supported in the domain name configuration import tool. Check the error message and try again: 1. Unadapted vendors are not supported. 2. Non-API methods do not support repeated execution. 3. Tasks that are not in the succeeded, failed, or partially failed state do not support repeated execution. | |
| 400 | MissingConfigId | Required parameter ConfigId missing. Specify ConfigId and try again. | The required parameter ConfigId is missing. Specify the ConfigId parameter and try again. | |
| 400 | MissingOssUrl | OssUrl missing. Specify a valid URL of the OSS object that stores URLs to prefetch. | The OssUrl field is missing. Make sure a valid OSS prefetch task URL is provided. | |
| 400 | MissingParameter | Required parameter RecordName missing. Specify RecordName and try again. | The required parameter RecordName is missing. Specify the RecordName parameter and try again. | |
| 400 | MissingParameter | The specified ArgName is required for this function. | A required parameter is missing when configuring a specific feature. | |
| 400 | MissingParameter.ObjectType | The ObjectType parameter is required if DomainName or ObjectType is specified. | Specify the ObjectType parameter. | |
| 400 | MissingParamsError | Missing required params. | A required parameter is missing. | |
| 400 | MissingSiteId | Required parameter SiteId missing. Specify SiteId and try again. | The required parameter SiteId is missing. Specify the SiteId parameter and try again. | |
| 400 | MissingTimeParameter | The StartTime and EndTime must be both specified. | Provide both the start time and end time. | |
| 400 | MissingUrlList | Enter the URLs you want to prefetch. | The prefetch URL is empty. Enter the URL to prefetch. | |
| 400 | MonitorExpectedBodyInvalid | Invalid response body. Specify a response body that does not exceed 102,400 characters in length in your custom rule. | The expected response value of the monitor is invalid. The length cannot exceed 102400 characters. Verify the response value and try again. | |
| 400 | MonitorExpectedCodesInvalid | Invalid expected status code for the probe.Make sure that you specify no more than 10 status codes in the probe settings, and each status code must be 3 to 4 characters in length.Examples: 200, 301, 3xx, 8000, and 88xx. | The expected response code of the monitor is invalid. The number of response codes cannot exceed 10, and each response code must be 3 to 4 characters in length. Examples: 200, 301, 3xx, 8000, 88xx. | |
| 400 | MonitorHeaderInvalid | Invalid request header for the probe. You can add up to 10 request headers, each with 1 to 9 values. The combined length of all headers and values cannot exceed 6,000 characters. You cannot configure the User-Agent header. | The request headers carried by the monitor are invalid. Make sure the number of request headers does not exceed 10, the value length of each request header is between 1 and 10, and the User-Agent request header is not used (this header is reserved for internal scenarios). The total length of all request headers and their values must not exceed 6000 characters. Check and correct the request header configuration and try again. | |
| 400 | MonitorMethodNotSupport | Invalid HTTP method for the probe request. Valid values are GET and HEAD. | The request method of the monitor is not supported. Only the following methods are supported: GET and HEAD. | |
| 400 | MonitorPathNotSupport | Invalid probe URL path.If you set the probe protocol to HTTP or HTTPS, make sure you specify a probe URL path that does not exceed 1,024 characters in length. | Health Check Path is not supported. When the monitoring type is HTTP or HTTPS, Health Check Path cannot be empty and the path length cannot exceed 1024 characters. Check the path and try again. | |
| 400 | MonitorPortNotSupport | Invalid probe port. Specify a valid port from 1 to 65535 for the probe request. Then, try again. | The monitoring port of the monitor is not supported. Valid values of port: 1 to 65535. Make sure the port is within the valid range and try again. | |
| 400 | MonitorRetriesInvalid | Invalid number of probe retries. Specify an integer from 0 to 5. Then, try again. | The retry count parameter of the monitor is not supported. Valid values of retry count: 0 to 5. Make sure the retry count is within this range. | |
| 400 | MonitorTimeoutInvalid | Invalid timeout for the probe. Valid values are 1 to 10. | The timeout value of the monitor is out of the valid range. Valid values: 1 to 10. | |
| 400 | MonitorTypeNotSupport | Invalid protocol. Valid values are off, HTTP, HTTPS, TCP, UDP, ICMP Ping, and SMTP. | The monitor type is not supported. Only the following types are supported: off, HTTP, HTTPS, TCP, UDP, ICMP Ping, and SMTP. | |
| 400 | NameAlreadyExists | The name already exists. | The name already exists. | |
| 400 | NameServerNotDelete | Before deleting the site, you need to go to your domain name service provider to delete the NS record assigned by ESA for the site (to avoid that you forget to delete NS and other users steal your site). | Before deleting the site, go to your domain name registrar and delete the NS records that ESA assigned to this site. This prevents other users from taking over your site if you forget to delete the NS records. | |
| 400 | NestedRuleQuotaCheckFailed | The nesting level of rules allowed by the plan failed to be verified. Please modify the nesting level of rules or upgrade the plan. | The number of nested sub-conditions in the rule exceeds the plan limit. Check the plan description and upgrade your plan. | |
| 400 | NoAvaliablePaymentMethod | No payment method is specified for your account. We recommend that you add a payment method. | No payment method is specified for your account. Add a payment method. | |
| 400 | NoPermission | You do not have permissions to access or operate on the resource.Contact your account administrator to attach the AliyunESAFullAccess policy to the current user. | You do not have permission to access or perform operations on the current resource. Contact the administrator of your Alibaba Cloud account to grant you the AliyunESAFullAccess policy. | |
| 400 | NoPermission | Permission denied. | You do not have the required permissions. | |
| 400 | NoRealNameAuthentication | You have not completed real-name authentication. | You have not completed real-name verification. | |
| 400 | NotExist.MigratedTask | The specified task does not exist. | The specified task does not exist. | |
| 400 | OperationDenied.DefaultSiteEnvironmentUneditable | The rule of the default environment is not allowed to be modified. | Rules in the default environment cannot be modified. | |
| 400 | OperationDenied.UnsupportPlan | The current plan does not support this operation. Use the correct plan instance to try again. | The current plan does not support this operation. Use an instance with the correct plan and try again. | |
| 400 | OperationDenied.VanityNSUnavailable | Only sites in NS access type can use vanity nameservers. Convert your site to NS access type and try again. | Custom NS is available only for sites connected through NS mode. Change your site connection method and try again. | |
| 400 | Order.InstanceHasUnpaidOrder | You have an unpaid order. Complete the payment or cancel the order first. | Your plan purchase has not been paid. Complete the payment or void the order before placing a new one. | |
| 400 | OriginPoolNameConflict | The specified origin pool name already exists or its hostname conflicts with a load balancer name. Try again with a unique name. | The origin IPAM pool name conflicts with an existing name. Ensure the new name is different from all existing origin IPAM pool and load balancing names. | |
| 400 | OriginPoolNotExist | The specified origin pool does not exist or does not belong to your account or website. Check and try again. | The specified origin address pool does not exist, or does not belong to the current user and site. Verify the information and try again. | |
| 400 | OriginProtectionNotExist | The site is not configured with origin protection, so it cannot be modified or deleted. | Origin protection is not configured for the site, so it cannot be modified or deleted. | |
| 403 | Page.BeingBound | Failed to delete the custom error page because it has been associated with one or more rules. Dissociate all rules from the error page first. | The specified custom error page cannot be deleted because it is currently bound to one or more rules in the system. Before you can delete the error page, unbind it from all associated rules. Review the rule configurations, disassociate the error page from the rules, and then try again to ensure system consistency and reliable error handling. | |
| 403 | Page.BeingBound | The specified custom error page has been associated with one or more protection rules. Dissociate the protection rules and try again. | The specified custom response page is bound to one or more protection rules. Unbind the page from the rules and try again. | |
| 403 | Page.NotExist | The specified custom error page does not exist or is not recognized by the system.Check whether the error page identifier is correct and matches an error page that has been created and registered in the system's error handling framework.If you want to create a new error page, make sure that the creation process is complete. | The specified custom error page does not exist or is not recognized by the system. Ensure the error page identifier is correct and the page has been properly created and registered in the error handling framework. If you intend to add a new error page, verify that the creation process has been completed successfully. | |
| 403 | Page.NotExist | The specified error page is not found or not registered. Check the error page identifier and make sure that the page is correctly set up. | The specified error page was not found or is not registered. Check the page identifier and confirm that the page has been correctly set up. | |
| 400 | ParameterAlreadyExist | Parameter uniqueness verification failed. Check for duplicate parameter values. | Parameter uniqueness check failed. Check for duplicate parameter values. | |
| 400 | ParameterNotExist | The specified parameter does not exist. Check your configurations and try again. | The input parameter does not exist. Verify the parameter and try again. | |
| 400 | ParamNameError | The Name parameter is invalid. | The Name parameter is invalid. | |
| 400 | PlanNotSupportCnDdos | The plan corresponding to the current instance does not include ddos platform protection in mainland China, so the DDOS elastic protection value cannot be set. Please upgrade the package and try again. | The plan associated with the current instance does not include DDoS platform protection for the Chinese mainland. Therefore, the DDoS burstable protection value cannot be set. Upgrade your plan and try again. | |
| 400 | PolicyNameExist | The policy name already exists. | The policy name already exists. | |
| 400 | PolicyNotExist | The policy does not exist. | The policy does not exist. | |
| 400 | PoolNumberExceedQuotaLimit | The number of origin pool you have added has reached the upper limit of the plan quota. Please delete the origin pool that is no longer in use or upgrade the plan and try again. | The number of origin server groups you added has reached the quota limit of your plan. Delete unused origin server groups or upgrade your plan, and then try again. | |
| 400 | PoolReferenceExist | Failed to delete the origin pool because it has been referenced.Remove all references to the pool and try again. | The origin address pool is referenced and cannot be deleted. Remove the references and try again. | |
| 400 | PreloadQueueFull | The prefetch queue is full. Try again later. | The prefetch queue is full. Wait for the queue to be processed and try again. | |
| 400 | PrivateKey.MissingParameter | The PrivateKey parameter is required. | The PrivateKey parameter is missing. | |
| 200 | ProjectExist | The SLS project has been associated with another account. Check the project name. | The specified SLS project is already bound to another user. Check the project name and try again. | |
| 404 | ProjectNotExist | The project does not exist. | The corresponding project information was not found. | |
| 500 | QueryDBError | An internal exception occurred when query data, please try again later. | An internal error occurred while querying data. Try again later. | |
| 500 | QueryLog.Timeout | The query for standard logs timed out. Try again later. | The offline log system query timed out. Try again later. | |
| 400 | QuotaCheckFailed | Failed to check free certificate Quota, please try again later. | Failed to check the free certificate quota. Try again later. | |
| 400 | QuotaCheckFailed.CustomNS | Custom nameservers are not allowed in your plan. Check the plan description and upgrade the plan. | The current plan does not support custom NS configuration. Check the plan description and upgrade your plan. | |
| 400 | QuotaCheckFailed.Function | The feature is unavailable in your plan. Upgrade the plan or contact your account manager to request the feature. | Your plan does not include this feature. Upgrade your plan or contact your sales representative to add it. | |
| 400 | QuotaCheckFailed.FunctionArg | The specified feature parameter is not allowed in your plan, or the feature parameter configurations have reached the upper limit in your plan. | The feature parameter is not available in the current plan, or the quantity has exceeded the quota limit. | |
| 400 | QuotaCheckFailed.Regex | Rules engine with regular expressions is not allowed in your plan. Check the plan description and upgrade the plan. | The current plan does not support configuring rule engines with regular expressions. Check the plan description and upgrade your plan. | |
| 400 | QuotaCheckFailed.VersionManagement | Insufficient quota for version management. Contact technical support. | The version management quota of the current plan is insufficient. Contact customer service for details. | |
| 400 | QuotaCheckFailed.VersionManagement | The current plan's quota of version management is insufficient. Please try to upgrade the plan. | The version management quota of the current plan is insufficient. Upgrade your plan. | |
| 400 | QuotaExceed.NestedConditional | The maximum number of conditions in the rule has been reached. Check the plan description and upgrade the plan. | The number of nested sub-conditions in the rule exceeds the plan limit. Check the plan description and upgrade your plan. | |
| 400 | QuotaExceed.RecordCount | The maximum number of records has been reached. Delete some and try again or upgrade your plan. | The number of records has reached the upper limit. Delete some records and try again, or upgrade your plan. | |
| 400 | QuotaExceed.SiteCount | The maximum number of websites associated with your plan has been reached. | The number of sites has exceeded the quota limit. | |
| 400 | QuotaExceed.UploadHttpCert | The maximum number of custom certificates has been reached. Delete some and try again or upgrade your plan. | The number of self-uploaded certificates has reached the upper limit. Delete some certificates and try again, or upgrade your plan. | |
| 400 | QuotaExceed.WildCardRecord | The maximum number of wildcard records has been reached. Delete some and try again. | The number of wildcard domain name records has reached the upper limit. Delete some wildcard domain name records and try again. | |
| 400 | QuotaExceed.WildCardRecord | The number of wildcard records exceeds the plan quota. Contact the sales team to increase your quota. | The number of wildcard domain name records has exceeded the limit. Contact your sales representative to increase the quota. | |
| 400 | QuotaExceed.WildcardRecordCount | The number of wildcard records added by your current site has reached the quota limit. Please delete useless wildcard records or upgrade to the plan and try again. | The number of wildcard records added to your current site has reached the quota limit. Delete unused wildcard records or upgrade your plan, and then try again. | |
| 403 | QuotaExceeded | The quota is exceeded. | Insufficient quota. | |
| 400 | QuotaExceeded | You attempts have exceeded the daily limit. | The daily quota limit has been exceeded. The submission quota for today has been used up. You can query the remaining available quota for today through the quota API. | |
| 400 | QuotaNotExist | The quota item does not exist or the purchased plan has not taken effect. Confirm and try again. | The plan quota item does not exist or the purchased plan has not taken effect. Verify the plan and try again. | |
| 400 | RamAuthFailed | The sub-account has no operation permission. | The RAM user does not have the required permissions. | |
| 403 | RealTimeLog.BucketRegionError | Invalid OSS bucket region. Check the region and try again. | The region of the OSS bucket that you selected for log delivery is incorrect. Verify the region and try again. | |
| 403 | RealTimeLog.KafkaBrokersExceedError | The number of Kafka Broker addresses for real-time log delivery has reached the upper limit (50). | The number of Kafka Broker server addresses for real-time log delivery exceeds the upper limit of 50. | |
| 403 | RealTimeLog.KafkaConfigError | Invalid Kafka information for the delivery task. Check your configurations and try again. | The Kafka delivery configuration is incorrect. Verify the configuration and try again. | |
| 403 | RealTimeLog.LogstoreExist | The SLS logstore has been created within this project. Check the project name. | A Logstore with the same name already exists in the SLS project. Verify the Logstore name. | |
| 403 | RealTimeLog.NameCheckFail | Real-time log name field validity check failed. | The real-time log configuration field contains invalid characters. Remove the invalid characters and try again. Allowed characters include digits, letters, underscores (_), and spaces ( ). | |
| 403 | RealTimeLog.OssBucketQueryError | Failed to query the OSS bucket. Check the bucket name and try again. | Failed to query the OSS bucket. Verify the bucket name and try again. | |
| 403 | RealTimeLog.OssRoleCheckError | You do not have permissions to create a service-linked role for OSS. Contact your Alibaba Cloud account or the permission administrator to attach the AliyunESAFullAccess policy or a custom policy that grants permissions to create a service-linked role to the current user. | You do not have the authorization to create the OSS service-linked role. Contact the Alibaba Cloud account owner or the permission management administrator to grant the current user AliyunESAFullAccess or a custom policy to associate with the service-linked role creation permission. | |
| 400 | RealTimeLog.ProjectExistError | The real-time log delivery task name already exists. Check the task name and try again. | The real-time log task name already exists. Verify the task name and try again. | |
| 403 | RealTimeLog.RegexpCheckFail | Invalid characters exist in your parameter configurations. Check your configurations and try again. | The configured parameter field contains invalid characters. Verify the configuration and try again. | |
| 403 | RealTimeLog.S3EndpointInvalidError | Invalid S3 information for the delivery task. Check your configurations and try again. | The S3 delivery address is incorrect. Verify the delivery address and try again. | |
| 403 | RealTimeLog.SlrRoleCheckError | Your account does not have AliyunServiceRoleForESARealtimeLogPushSLS authorization. Please contact the main account or permission administrator to authorize the current user AliyunServiceRoleForESARealtimeLogPushSLS permission or create custom permissions and policies for service-associated roles. | Your account does not have the AliyunServiceRoleForESARealtimeLogPushSLS authorization. Contact the Alibaba Cloud account owner or the permission management administrator to grant the current user the AliyunServiceRoleForESARealtimeLogPushSLS authorization, or associate a custom policy for creating service-linked roles. | |
| 403 | RealTimeLog.SlsClientError | Invalid SLS information. Check whether ProjectName and LogStoreName are correctly configured and whether SLS is activated. Then, try again. | The log service information you entered is invalid. Verify that the ProjectName and LogStoreName are correct and that your account has activated Simple Log Service, and then try again. | |
| 403 | RealTimeLog.SlsEndpointError | Invalid SLS parameters for the delivery task. Check your configurations and try again. | The SLS delivery address is incorrect. Verify the delivery address and try again. | |
| 403 | RealTimeLog.SlsLogstoreQueryError | Failed to query the Logstore. Check the Logstore name and try again. | Failed to query the Logstore. Verify the Logstore name and try again. | |
| 403 | RealTimeLog.SlsNotOpen | You have not activated Alibaba Cloud SLS. Activate SLS first. | You have not activated Alibaba Cloud Simple Log Service. Activate the service first. | |
| 403 | RealTimeLog.SlsProjectExistError | The SLS project already exists. Check the project name and try again. | The SLS log project already exists. Verify the project name and try again. | |
| 403 | RealTimeLog.StatusQuotaError | The maximum number of real-time log delivery tasks has been reached. Check your plan quota and upgrade the plan to request a quota increase. | The number of real-time log deliveries has reached the plan quota limit. Check your plan quota and upgrade your plan to obtain more real-time log delivery quota. | |
| 400 | RealtimeLogProjectExistError | Realtime-log project name already exist. | The real-time log project name already exists. | |
| 403 | Record.AlreadyExist | The specified record content conflicts with existing records. Adjust your configurations based on the related product documentation. | The record conflicts with an existing record. Adjust the record content based on the conflict rule documentation. | |
| 400 | Record.AorAAAARecordValueContainInvalidIP | The A/AAAA record value contains the invalid IP. | The record value contains an invalid IP address when creating or editing an A/AAAA record. | |
| 400 | Record.AorAAAARecordValueContainIPInBlacklist | The A/AAAA record value contains the blacklist IP. | The record value contains a blacklisted IP address when creating or editing an A/AAAA record. | |
| 400 | Record.AorAAAARecordValueIPExceedLimit | The number of IP addresses exceeds the limit for the A/AAAA record. | The number of IP addresses exceeds the limit when creating or editing an A/AAAA record. Each hostname supports a maximum of 8 IPv4 and 4 IPv6 addresses. Adjust the configuration and try again. | |
| 400 | Record.CAARecordFlagExceedLimit | The value of the flag parameter for a CAA record is out of range. | The flag parameter value of the CAA record is out of range when creating or editing a DNS record. | |
| 400 | Record.CAARecordTagExceedLimit | The CAA record tag has illegal characters other than issue, issuewild, and iodef. | The Tag value contains invalid characters other than issue, issuewild, or iodef when creating or editing a CAA record. | |
| 400 | Record.CERTRecordAlgorithmExceedLimit | The value of the algorithm parameter for the CERT record is out of range. | The algorithm parameter value of the CERT record is out of range when creating or editing a DNS record. | |
| 400 | Record.CERTRecordKeyTagExceedLimit | The value of the keyTag parameter for a CERT record is out of range. | The keyTag parameter value of the CERT record is out of range when creating or editing a DNS record. | |
| 400 | Record.CERTRecordTypeExceedLimit | The CERT record type is out of range. | The type parameter of the CERT record is out of range when creating or editing a DNS record. | |
| 400 | Record.CNameRecordValueCannotEqualExistedIPASource | The CNAME record cannot be the origin of the added Layer 4 application. Check the values of other Layer 4 proxy records and try again. | A CNAME record cannot be an origin server of an existing Layer 4 application. Check the record values of other Layer 4 proxy records and try again. | |
| 400 | Record.CNameRecordValueCannotEqualExistedPoolSource | The CNAME record cannot be the origin of the added source address pool. Check and try again. | A CNAME record cannot be an origin server of an existing origin address pool. Verify the configuration and try again. | |
| 400 | Record.CNameRecordValueCannotEqualExistedRecordSource | The CNAME record cannot be the origin of an added record. Check the record values of other records and try again. | A CNAME record cannot be an origin server of an existing record. Check the record values of other records and try again. | |
| 400 | Record.CNameRecordValueCannotEqualHostRecord | The record value of the CNAME record cannot be exactly the same as the host record. | The record value of a CNAME record cannot be identical to the hostname. Adjust the configuration and try again. | |
| 400 | Record.CNameRecordValueCannotEqualOtherExistedIPARecord | The record value of a CNAME record cannot be exactly the same as the name of another existing Layer 4 proxy record. | The record value of a CNAME record cannot be identical to the name of an existing Layer 4 proxy record. | |
| 400 | Record.CNameRecordValueCannotEqualOtherExistedRecord | The record value of a CNAME record cannot be the same as the name of another existing CNAME record. | The record value of a CNAME record cannot be identical to the name of an existing CNAME record. | |
| 400 | Record.CNameRecordValueContainSourceInBlacklist | The CNAME record value contains the blacklist address. For details, you can submit a work order for consultation. | The CNAME record value contains a blacklisted address. Submit a ticket for more information. | |
| 400 | Record.CNameRecordValueExceedLimit | The CNAME record value cannot exceed 253 characters, please delete and try again. | The record value cannot exceed 253 characters. Shorten the value and try again. | |
| 400 | Record.CNameRecordValueInvalidDomainUnderline | Record values (DNS-only records) generally start with an underscore, a lowercase letter a-z, and the numbers 0-9. The middle part of the record can be lowercase letters, numbers, or hyphens, and the length is between 0 and 61 characters. | The record value (DNS-only records) must start with an underscore (_), a lowercase letter a-z, or a digit 0-9. The middle part of the record can contain lowercase letters, digits, or hyphens (-), with a length between 0 and 61 characters. | |
| 400 | Record.CNameRecordValueInvalidRecordDomain | Record values (records with agent acceleration enabled) must start with a lowercase letter a-z and numbers 0-9. The middle part of the record can be lowercase letters, numbers, or hyphens, and the length is between 0 and 61 characters. | The record value (proxied records) must start with a lowercase letter a-z or a digit 0-9. The middle part of the record can contain lowercase letters, digits, or hyphens (-), with a length between 0 and 61 characters. | |
| 400 | Record.Conflict | The specified record content conflicts with existing records. Adjust your configurations based on the related product documentation. | The record conflicts with an existing record. Adjust the record content based on the conflict rule documentation. | |
| 400 | Record.EmptyAorAAAARecordValue | The A/AAAA record value is empty, please fill it in correctly and try again. | The record value is empty. Enter a valid value and try again. | |
| 400 | Record.EmptyCAARecordValue | The CAA record value is empty. | The record value is empty when you create or edit a CAA record. | |
| 400 | Record.EmptyCNameRecordValue | The CNAME record value is empty. | The record value is empty when you create or edit a CNAME record. Enter a valid value and try again. | |
| 400 | Record.EmptyMXRecordValue | The MX record value cannot be empty. | The record value cannot be empty when you create or edit an MX record. | |
| 400 | Record.EmptyNSRecordValue | The NS record value cannot be empty. | The NS record value cannot be empty when you create or edit an NS record. | |
| 400 | Record.EmptyRecordValue | The record value is empty, please fill it in correctly and try again. | The record value is empty. Enter a valid value and try again. | |
| 400 | Record.EmptyTXTRecordValue | The TXT record value cannot be empty. | The record value cannot be empty when you create or edit a TXT record. | |
| 400 | Record.InvalidCertEncodeWithCERTRecord | The certificate value of the CERT record is not base64-encoded. | The certificate value of the CERT record is not a Base64 encoding value when you create or edit a CERT record. | |
| 400 | Record.InvalidFingerprintWithSSHFPRecord | The SSHFP record fingerprint value is not hexadecimal encoded. | The fingerprint value is not hexadecimal-encoded when you create or edit an SSHFP record. | |
| 400 | Record.InvalidHTTPURLWithCAARecordTag | The CAA record is prefixed with http:// or https://, a valid URL must be followed. | When you create or edit a CAA record, if the Tag is iodef and the Value starts with http:// or https://, it must be followed by a valid URL. | |
| 400 | Record.InvalidIdoefDataWithCAARecordTag | The CAA record Tag value does not start with mailto: or http:// or https. | The Tag value does not start with mailto:, http://, or https:// when you create or edit a CAA record. | |
| 400 | Record.InvalidIodefDataWithCAARecordTag | The CAA record Tag value cannot start with mailto: or http:// or https. | The Tag value cannot start with mailto: http:// or mailto: https:// when you create or edit a CAA record. | |
| 400 | Record.InvalidIssueDataWithCAARecordTag | The tag of a CAA record can only be a semicolon or a valid domain name separated by semicolons. | The Tag of the CAA record can only be a semicolon or valid domain names separated by semicolons when you create or edit a CAA record. | |
| 400 | Record.InvalidMailAddressWithCAARecordTag | The CAA record tag is prefixed with mailto:, it must be followed by a legal email address. | When you create or edit a CAA record, if the Tag is iodef and the Value starts with mailto:, it must be followed by a valid email address. | |
| 400 | Record.InvalidSmimeaEncodeWithSMIMEARecord | The certificate value of the SMIMEA record is not base64-encoded. | The certificate value of the SMIMEA record is not a Base64 encoding value when you create or edit an SMIMEA record. | |
| 400 | Record.InvalidTslaEncodeWithTSLARecord | The certificate value passed in is not hexadecimal encoded with TSLA record. | The certificate value is not hexadecimal-encoded when you create or edit a TLSA record. | |
| 400 | Record.InvalidURLWithURIRecord | The URI record value must be a valid URL address. | The record value must be a valid URL when you create or edit a URI record. | |
| 400 | Record.MXRecordPriorityExceedLimit | The MX record priority parameter value is out of range. | The MX record priority parameter value is out of range when you create or edit a DNS record. | |
| 400 | Record.NoRecordNameConflictWithNSRecord | No record name can conflict with an NS record name. | No record name can conflict with an NS record name. | |
| 400 | Record.NoResource | Failed to allocate resources for the record. Please submit a ticket for processing. | Failed to allocate resources for the record. Submit a ticket for assistance. | |
| 404 | Record.NotFound | The record does not exist. Check your configurations and try again. | The specified request record does not exist. Check your input parameters and try again. | |
| 404 | Record.NotFound | The record does not exist. Modify it and try again. | The record does not exist. Modify your request and try again. | |
| 400 | Record.NSRecordCannotEqualSiteName | An NS record with the exact same name as the site name is not allowed. | Adding an NS record with the same name as the site name is not allowed. | |
| 400 | Record.OSSSourceInvalidAuthType | The recorded OSS origin station authentication type is not supported. | The OSS origin authentication type of the record is not within the supported range. | |
| 400 | Record.ParseJSONRecordValueFailed | The JSON data format of the record data is incorrect. Please adjust and try again. | The JSON format of the record value is invalid. Modify the value and try again. | |
| 400 | Record.PoolSourceNotExistPool | If the source station type of the record is source address pool, the input source address pool does not exist. | The specified origin address pool does not exist when the origin type of the record is set to origin address pool. | |
| 400 | Record.RecordMatchingTypeExceedLimit | The matchingType parameter value filled in is out of range. | The matchingType parameter value is out of range when you create or edit a DNS record. | |
| 400 | Record.RecordNameConflictForSpecifiedRecordType | The A/AAAA and CNAME records cannot have the same name. | A/AAAA and CNAME records cannot have the same name. | |
| 400 | Record.RecordNameConflictWithIPAName | The record name cannot have the same name as the Layer 4 proxy record. | The record name cannot be the same as a Layer 4 proxy record name when you create or edit a DNS record. | |
| 400 | Record.RecordNameConflictWithLBName | The record name cannot be the same as the Server Load Balancer record name. | The record name cannot be the same as a load balancing record name when you create or edit a DNS record. | |
| 400 | Record.RecordNameConflictWithNSRecord | The NS record name cannot be the same as any other type of record name. | The NS record name cannot be the same as any other record type name when you create or edit a DNS record. | |
| 400 | Record.RecordNameConflictWithPoolName | The record name cannot be the same as the source address pool record name. | The record name cannot be the same as an origin address pool record name when you create or edit a DNS record. | |
| 400 | Record.RecordNameConflictWithSameRecordType | Record conflict with the same record type, there is a host record with the same name with the same record value. | A record conflict exists. A host record with the same name and record value already exists. | |
| 400 | Record.RecordNameConflictWithSameRecordType | Record conflicts with an existing host record that has the same name and value. | A record conflict exists. A host record with the same name and record value already exists. | |
| 400 | Record.RecordNameInBlacklist | The record name is in blacklist. | The record name is in the blacklist and cannot be added. | |
| 400 | Record.RecordPriorityExceedLimit | The record priority parameter value filled in is out of range. | The record priority parameter value is out of range when you create or edit a DNS record. | |
| 400 | Record.RecordSelectorExceedLimit | The selector parameter value filled in is out of range. | The selector parameter value is out of range when you create or edit a DNS record. | |
| 400 | Record.RecordUsageExceedLimit | The usage parameter value filled in is out of range. | The usage parameter value is out of range when you create or edit a DNS record. | |
| 400 | Record.RecordValueContainSourceInBlacklist | The record value contains the blacklist address, and the details can be submitted for work order consultation. | The record value contains a blacklisted address. Submit a ticket for more information. | |
| 400 | Record.RecordWeightExceedLimit | The record weight parameter value filled in is out of range. | The record weight parameter value is out of range when you create or edit a DNS record. | |
| 400 | Record.Reserved | Another operation on the record is in progress. Try again later. | A record operation is in progress. Wait and try again. | |
| 400 | Record.S3SourceInvalidAuthRegion | The recorded S3 origin belongs to a region that is not in the supported range. | The region of the S3 origin server specified in the record is not supported. | |
| 400 | Record.S3SourceInvalidAuthType | The recorded S3 origin authentication type is not supported. | The authentication type of the S3 origin server specified in the record is not supported. | |
| 400 | Record.S3SourceInvalidAuthVersion | The version of the authentication signature algorithm of the S3 origin is not supported. | The authentication signature algorithm version of the S3 origin server specified in the record is not supported. | |
| 400 | Record.ServiceBusy | The record is being configured. Try again later. | The record is being configured. Try again later. | |
| 400 | Record.SMIMEARecordMatchingTypeExceedLimit | The matchingType parameter value for a SMIMEA record is out of range. | The matchingType parameter value of the SMIMEA record is out of range when you create or edit a DNS record. | |
| 400 | Record.SMIMEARecordSelectorExceedLimit | The selector parameter value for a SMIMEA record is out of range. | The selector parameter value of the SMIMEA record is out of range when you create or edit a DNS record. | |
| 400 | Record.SMIMEARecordUsageExceedLimit | The value of the usage parameter for a SMIMEA record is out of range. | The usage parameter value of the SMIMEA record is out of range when you create or edit a DNS record. | |
| 400 | Record.SourceAccessKeyExceedLimit | The character length of the AccessKey parameter value for the record source station is out of range. | The character length of the AccessKey parameter value for the record origin server is out of range. | |
| 400 | Record.SourceEmptyAK | The AccessKey of the account to which the origin site belongs is empty. | The AccessKey of the account to which the record origin server belongs is empty. | |
| 400 | Record.SourceEmptyAuthConf | The authentication information of the origin station is empty. | The authentication information of the record origin server is empty. | |
| 400 | Record.SourceEmptySecretKey | The SecretKey of the account to which the recorded origin site belongs is empty. | The SecretKey of the account to which the record origin server belongs is empty. | |
| 400 | Record.SourceSecretKeyExceedLimit | The character length of the SecretKey parameter value for the record source station is out of range. | The character length of the SecretKey parameter value for the record origin server is out of range. | |
| 400 | Record.SRVRecordInvalidRecordName | SRV host record name is not valid. The SRV host record name must begin with an underscore (-) followed by a lowercase letter (a-z), a number (0-9), and a hyphen (-), followed by 1 arbitrary character, followed by an underscore (-) and a lowercase letter, number, or hyphen. | The SRV host record name is invalid. The SRV host record name must start with an underscore (-), followed by lowercase letters (a-z), digits (0-9), or hyphens (-), then one arbitrary character, followed by one underscore (-) and lowercase letters, digits, or hyphens. | |
| 400 | Record.SRVRecordPortExceedLimit | The SRV record port is out of range. | The SRV record port is out of range when you create or edit a DNS record. | |
| 400 | Record.SRVRecordPriorityExceedLimit | The SRV record priority is out of range. | The SRV record priority is out of range when you create or edit a DNS record. | |
| 400 | Record.SRVRecordWeightExceedLimit | The SRV record weight is out of range. | The SRV record weight is out of range when you create or edit a DNS record. | |
| 400 | Record.SSHFPRecordAlgorithmExceedLimit | The algorithm parameter value for the SSHFP record is out of range. | The algorithm parameter value of the SSHFP record is out of range when you create or edit a DNS record. | |
| 400 | Record.TLSARecordMatchingTypeExceedLimit | The matchingType parameter value for the TLSA record is out of range. | The matchingType parameter value of the TLSA record is out of range when you create or edit a DNS record. | |
| 400 | Record.TLSARecordSelectorExceedLimit | The selector parameter value for the TLSA record is out of range. | The selector parameter value of the TLSA record is out of range when you create or edit a DNS record. | |
| 400 | Record.TLSARecordUsageExceedLimit | The value of the usage parameter for the TLSA record is out of range. | The usage parameter value of the TLSA record is out of range when you create or edit a DNS record. | |
| 400 | Record.TTLExceedLimit | The TTL parameter value for a record is out of range. | The TTL parameter value of the record is out of range when you create or edit a DNS record. | |
| 400 | Record.TXTRecordValueExceedLimit | The TXT record value cannot exceed 450 characters. | The TXT record value cannot exceed 450 characters when you create or edit a DNS record. | |
| 400 | Record.TypeExceedLimitWithSSHFPRecord | The SSHFP record Type parameter value is out of range. | The Type parameter value of the SSHFP record is out of range when you create or edit a DNS record. | |
| 400 | Record.UnmatchedRecordNameContainDoubleConsecutiveDot | Illegal host record name. The host record cannot contain consecutive dot. | The host record name is invalid. The host record name cannot contain consecutive dots. | |
| 400 | Record.UnmatchedRecordNameForbidStarSev | Illegal host record name, SRV record name disallowed asterisk. | The host record name is invalid. Asterisks are not allowed in SRV record names. | |
| 400 | Record.UnmatchedRecordNameInvalidATChar | Illegal host record name. The at symbol can only appear at the top of the host record and can only be followed. Symbol, other strings are not allowed. | The host record name is invalid. The @ symbol can only appear at the beginning of the host record and must be followed only by a dot (.). No other characters are allowed after it. | |
| 400 | Record.UnmatchedRecordNameInvalidNamePrefixSuffix | Illegal host record name. Host record values cannot start or end with a dot, a hyphens. | The host record name is invalid. The host record value cannot start or end with a dot or hyphen. | |
| 400 | Record.UnmatchedRecordNameInvalidStartSymbol | Illegal host record name. The asterisk is only allowed in the first place of the host record, and only the following dot is allowed after the asterisk. | The host record name is invalid. An asterisk is allowed only at the beginning of the host record and must be followed only by a dot. | |
| 400 | Record.UnmatchedRecordNameInvalidUnderLine | The host record name contains an illegal underscore. The underscore can only be supported at the beginning of TXT, CAA, CNAME, NS, and SRV records. Proxy acceleration cannot be enabled and records can only be added in DNS mode. | The host record name contains an invalid underscore. Underscores are supported only at the beginning of TXT, CAA, CNAME, NS, and SRV records. Proxy acceleration cannot be enabled, and records can only be added in DNS mode. | |
| 400 | Record.UnmatchedRecordNameInvalidUnderLine | The host record name contains an illegal underscore. The underscore is only supported at the beginning of the TXT, CNAME, MX, SRV, and NS records. Proxy acceleration cannot be enabled, and records can only be added in the DNS mode. | The host record name contains an invalid underscore. Underscores are supported only at the beginning of TXT, CNAME, MX, SRV, and NS records. Proxy acceleration cannot be enabled, and records can only be added in DNS mode. | |
| 400 | Record.UnmatchedRecordNameOnlyContainSymbol | The host record value cannot exist separately in various symbols, and can be added with any lowercase letters or numbers. | The host record value cannot consist of symbols alone. Add lowercase letters or digits. | |
| 400 | Record.UnmatchedRecordNameOnlyContainSynbol | The host record value cannot exist separately in various symbols, and can be added with any lowercase letters or numbers. | The host record value cannot consist of symbols alone. Add lowercase letters or digits. | |
| 400 | Record.UnmatchedRecordNameOnlyRangeChar | Illegal host record character. Only lowercase a-z, uppercase A- Z, digits 0-9, some special characters are supported as valid characters in host records. | The host record contains invalid characters. Valid characters include lowercase letters a-z, uppercase letters A-Z, digits 0-9, hyphens (-), underscores (_), dots (.), asterisks (*), and at signs (@). | |
| 400 | Record.UnmatchedRecordNameSeperateStringTooLarge | Illegal host record name. The number of characters in each segment separated by dot cannot exceed 63. | The host record name is invalid. Each segment separated by a dot cannot exceed 63 characters. | |
| 400 | Record.UnsupportedSourceType | The recorded source station type is not in the supported range. | The origin server type of the record is not supported. | |
| 400 | Record.UnsupportedType | The record type parameter is unsupported. | The record type is invalid. Check the record type parameter. | |
| 400 | Record.URIRecordPriorityExceedLimit | The value of the priority parameter for a URI record is out of range. | The priority parameter value of the URI record is out of range when you create or edit a DNS record. | |
| 400 | Record.URIRecordWeightExceedLimit | The URI record weight parameter value is out of range. | The weight parameter value of the URI record is out of range when you create or edit a DNS record. | |
| 400 | Record.ValidProxiedForSpecifedRecordType | Only A/AAAA and CNAME types support proxy acceleration. | Proxy acceleration is enabled for the record, but only A/AAAA and CNAME record types support proxy acceleration. | |
| 400 | Record.WildcardConflictForSpecifiedRecordType | The A/AAAA,CNAME records cannot add all and asterisk prefixed records at the same time. | A/AAAA and CNAME records cannot have both the "all" prefix and the asterisk prefix added at the same time. | |
| 400 | Record.WildcartConflictForSpecifiedRecordType | The A/AAAA,CNAME records cannot add all and asterisk prefixed records at the same time. | A/AAAA and CNAME records cannot have both the "all" prefix and the asterisk prefix added at the same time. | |
| 400 | RecordNameInBalckList | The record name is in the blacklist. | The record name is in the blacklist. | |
| 400 | RelatedRecordNumberExceedQuotaLimit | The maximum number of records associated with the routine has been reached. Check your plan quota and upgrade the plan to request a quota increase. | The number of function association records has reached the upper limit of your plan. Check your plan quota and upgrade your plan to obtain more function association record quota. | |
| 400 | RelatedRouteNumberExceedQuotaLimit | The maximum number of routes associated with the routine has been reached. Check your plan quota and upgrade the plan to request a quota increase. | The number of associated routes has reached the upper limit of your plan. Check your plan quota and upgrade your plan to obtain more associated route quota. | |
| 400 | RelatedSiteNumberExceedQuotaLimit | The maximum number of websites that can be associated with the routine has been reached. | The number of sites associated with the function has exceeded the system-defined upper limit. | |
| 400 | RequestNotSupported | Free certificates cannot be requested for a website that is not in the active state. Activate the website first. | Inactive sites do not support free certificate applications. Activate the site first. | |
| 400 | RiskControlRejection | In order to protect the security of your account, the order was suspended, please contact customer service for details. | To protect your account security, the order has been suspended. Contact customer service for details. | |
| 400 | RoutineAlreadyExist | The routine name already exists. | The specified function name already exists. Specify a different name. | |
| 400 | RoutineCodeVersionStatusNotAvailable | The routine code version status not Available. Check the routine code version status and try again. | The specified function code version is not in the Available state and cannot be used for deployment. Verify the function code version status and try again. | |
| 400 | RoutineNotExist | The routine name does not exist. Check the routine name and try again. | The specified function name does not exist. Verify the function name and try again. | |
| 400 | RoutineNumberExceedQuotaLimit | The maximum number of configuration items for the feature has been reached. Adjust your configurations and try again. | The number of configuration items for the current feature has exceeded the system-defined upper limit. Adjust the configuration and try again. | |
| 400 | RoutineUserServiceStatusHalt | Failed to update the configurations because you have overdue payments. | The user is in a suspended state and cannot perform update operations. | |
| 400 | RR307 | If the credit card verification is not completed, please guide the self-service verification through the mail and in-station letter. Please place an order again after the verification is passed. | Credit card verification has not been completed. Follow the instructions in the email and internal messages to complete the verification, and then place the order again after verification is successful. | |
| 400 | RR307 | Credit card verification is not complete. Please follow the guidance in the email and the internal message to complete the verification. Once verified, please place your order again. | Credit card verification has not been completed. Follow the instructions in the email and internal messages to complete the verification, and then place the order again after verification is successful. | |
| 400 | RR309 | The system has detected that your payment method is at risk. Please complete the verification through the link in the email and the in-station letter. Please place the order again after the verification is passed. | The system has detected a risk with your payment method. Complete the verification by following the link in the email and internal messages, and then place the order again after verification is successful. | |
| 403 | Rule.Config.Malformed | The format of the rule configuration is invalid.Check the configuration for syntax errors or structural inconsistencies and correct them to meet the requirements. | The specified rule configuration format is incorrect or does not conform to the required format. Check the rule configuration for syntax errors or structural inconsistencies and correct them to conform to the expected configuration schema. | |
| 403 | Rule.Config.Noncompliance | The specified rule configuration does not meet the compliance requirements.Check and adjust your configurations. | The specified rule configuration does not meet the established compliance standards. Check the rule settings for any discrepancies or violations of the expected standards and make the necessary adjustments to ensure all rules are properly validated. | |
| 403 | Rule.Name.AlreadyExists | The specified rule name already exists.Try again with a unique name or modify the existing rule name. | The specified rule name already exists in the system configuration and cannot be reused. Choose a unique rule name that does not conflict with existing rule names, or consider renaming the existing rule if necessary to eliminate any possible ambiguity and ensure the uniqueness of each rule identifier. | |
| 400 | Rule.NotExist | The specified rule does not exist. | The specified rule does not exist in the current context or system configuration. Verify the rule identifier and ensure that it has been correctly defined or implemented. | |
| 403 | Rule.Position.Invalid | The specified position for the rule is invalid.Check and adjust the configuration to make sure it meets the requirements. | The specified rule position is invalid or out of the acceptable range. Verify the rule position parameter and make appropriate corrections to ensure compliance with the established boundaries or sequence requirements. | |
| 400 | RuleCompileError | Failed to compile the rule. Check your rule configurations and make sure they are in the valid format as described in the API documentation. | Rule compilation failed. Check the rule configuration that you specified. Refer to the rule configuration format described in the API documentation. | |
| 400 | RuleRegexQuotaCheckFailed | When configuring rules, rules with regular expressions are not allowed in this plan. Please check the relevant documentation of the plan or upgrade the plan. | The current plan does not support configuring rule engines with regular expressions. Check the plan description and upgrade your plan. | |
| 403 | Ruleset.Name.AlreadyExists | The specified rule set name already exists.Try again with a unique name or modify the existing rule set name. | The specified ruleset name already exists in the rule management framework of the system. Choose a unique alternative name to avoid duplication and potential conflicts with existing rulesets. If you are renaming an existing ruleset, ensure that the new name is unique and does not conflict with identifiers of other established rulesets. | |
| 403 | Ruleset.NotExist | The specified rule set does not exist or has not been registered in the system.Check whether the specified rule set identifier is valid and matches a rule set that has been correctly defined and maintained by the system's rule set registry.If you want to add a new rule set, make sure that the creation and registration process is complete to bring the rule set into effect. | The specified ruleset does not exist or has not been registered in the current system configuration. Verify that the ruleset identifier is correct and points to a ruleset that has been properly defined and maintained in the system ruleset registry. If the ruleset is a new entity, ensure that the necessary steps for its creation and registration have been successfully completed so that it is available. | |
| 400 | SameNameRecordsExceedLimit | The maximum number of records with the same name added in one batch exceeds 5. Add records with the same name in batches or reduce the number of records with the same name added in one batch. | The maximum number of records with the same name in a batch addition exceeds 5. Add records with the same name in batches, or reduce the number of records with the same name in a single batch. | |
| 400 | ScenePolicyQuotaExceedLimit | The maximum number of scenario policies has been reached. Each account can create up to 10 scenario policies. | The number of scenario-specific policy configurations has exceeded the upper limit. Each account supports a maximum of 10 scenario-specific policies. | |
| 400 | ServiceInvokeFailed | The call to the internal service failed. The engineer is resolving the problem. Please wait a moment before trying, or contact customer service for details. | Failed to call the service. Try again later or contact customer service for details. | |
| 400 | ServiceNotOpen | You have not activated Edge Routine. Activate the service and try again. | You have not activated the Edge Routine service. Activate the service and try again. | |
| 400 | Site.AlreadyExist | The website name you specified already exists. Try with another name. | The specified site already exists. Specify a different site. | |
| 400 | Site.Conflict | Duplicate website names exist across multiple accounts. Rename or delete one and try again. | A site conflict has occurred. Sites with the same name exist under multiple accounts. Delete or rename the conflicting site and try again. | |
| 400 | Site.InBlacklist | The site name is in the blacklist. | The site name is in the blacklist. | |
| 400 | Site.InvalidCoverage | The selected location is unavailable in your plan. Change the location to one that is covered by the plan and try again. | The acceleration region you selected is not supported by your current plan. Change to an acceleration region supported by your plan and try again. | |
| 403 | Site.NotExist | The specified website does not exist or is not recognized by the system.Check whether the specified website identifier is valid and matches a website that is active, defined, and recognized by the system.If you want to add a new website, make sure that the creation and registration process is complete to integrate the website to the system. | The specified site does not exist or is not currently recognized by the system. Verify that the site identifier is accurate and matches a site that is defined, currently active, and accessible within the system site network. If the site is intended to be newly added, ensure that the appropriate creation or registration process has been completed to integrate it into the system. | |
| 400 | Site.NotSupportedStatus | The current site state is not supported. | The current site status is not supported. | |
| 400 | Site.ServiceBusy | This website is being configured. Try again later. | The site is being configured. Try again later. | |
| 400 | Site.UpdateAccessTypeUnable | Failed to change the DNS setup for the website. Check whether the website has configurations or DNS records that are incompatible with the target DNS setup option. | The access type of the site cannot be updated. Check whether there are configurations or records that are not supported by the target access type. | |
| 400 | SiteConfigLengthExceedLimit | The overall configuration size of the site exceeds the limit, and the total size of all functional configurations of the site cannot exceed 512K. | The site feature configuration size exceeds the limit. The total size cannot exceed 512 KB. | |
| 400 | SiteEnvironment.Conflict | The environment name or rule conflicts with an existing environment. Try again with a different environment name or rule. | The site environment name or rule conflicts with an existing environment. Use a different name or rule and try again. | |
| 400 | SiteEnvironment.DeleteDenied | The default environment cannot be deleted. | The default site environment cannot be deleted. | |
| 400 | SiteEnvironment.NotExist | The specified environment is invalid or version management is not enabled for your website. Make sure that you specify a valid environment name and version management is enabled. Then, try again. | The site version environment you entered is invalid, or version management has not been enabled for the site. Verify that your version environment settings are correct, and activate version management if necessary before trying again. | |
| 400 | SiteEnvironment.UpdateDenied | Failed to promote a version for the environment. Check whether the current environment has the highest rank and whether the current environment and the next higher-ranked environment have the same version deployed. | The site environment update was rejected. Verify that the environment you are trying to update has the highest priority and that the current environment version differs from the next-level version. | |
| 400 | SiteHasTransportLayerApplications | The current site has an existing four-layer accelerated application, and the current operation is not allowed. If necessary, please contact customer service. | The current site already has a Layer 4 acceleration application. The current operation is not allowed. If needed, contact customer service. | |
| 403 | SiteIdDDoSVersionCheckFailed | SiteId DDoS version check failed. | The DDoS version check for the site failed. | |
| 400 | SiteNotActivated | The site is not activated, the process is not allowed. | The site is not activated. This operation is not supported. | |
| 400 | SiteNotFound | The specified site is not found. | The specified site does not exist. Check whether the site you entered is correct. | |
| 404 | SiteNotFound | The website does not exist or does not belong to you. | The site does not exist or does not belong to you. | |
| 400 | SiteParameterNotMatch | Failed to verify website parameters.Check the parameters and try again. | The validation of site-related parameters failed. Check the parameters and try again. | |
| 200 | SiteVerify.Unpassed | Domain ownership verification failed. Complete the verification and try again. | The site ownership verification failed. Make sure the site ownership verification passes before trying again. | |
| 400 | SiteVersion.Configuring | The version is being configured. Try again later. | The current version is being configured. Try again later. | |
| 400 | SiteVersion.DeleteDenied | Failed to delete the version because it has been deployed to an environment. Make sure that the version is not deployed to any environment and try again. | The current site version is deployed in an environment and cannot be deleted. Make sure the current version is not deployed in any environment before trying again. | |
| 400 | SiteVersion.NotExist | The specified version is invalid or version management is not enabled for your website.Make sure that you specify a valid version and version management is enabled. Then, try again. | The site version you specified is invalid, or version management has not been enabled for the site. Check whether the configured version is correct and try again. If version management has not been enabled, enable it and try again. | |
| 400 | SourceAddressInvalid | Invalid origin address. Check whether the IP address or domain name is in the valid format. | The addresses of the origin server are invalid. Check and make sure the input is in the correct IP address or domain name format. | |
| 400 | SourceCircleExist | The host record of the resource to be operated on is already the source station of another resource, or the source station of the current resource has been added as a host record. To avoid loopback, modify the host record or source station and retry. | The hostname of the resource you are operating on is already configured as the origin server of another resource, or the origin server of the current resource has already been added as a hostname. To avoid routing loops, modify the hostname or origin server and try again. | |
| 400 | SourceInBlackList | The source is in the black list. | The origin server is in the blacklist. | |
| 400 | SourceNumberExceedLimit | The number of sources in the origin pool exceeds the quota limit. | The number of origin servers you can create in the origin address pool has reached the plan limit. Check your plan quota and upgrade your plan to obtain more quota. | |
| 400 | SourceTypeNotSupport | Invalid origin type. Valid values are ip_domain, OSS, FC, and S3. | The specified origin server type is not supported. Only the following origin server types are supported: ip_domain, OSS, FC, and S3. Other types are not supported. | |
| 400 | Specification.OverLimit | Specifications exceed the limit, paid version can use 50ms, 100ms, free version can only use 5ms. | The specification limit is exceeded. The paid edition supports 50 ms and 100 ms, while the Free Edition supports only 5 ms. | |
| 400 | SpecifiedVersionReadOnly | The specified version number is read-only and cannot be modified. | The specified version is read-only. The version configuration cannot be modified. | |
| 400 | SubSiteUnavailable | Subdomains are allowed only in Enterprise plans. Upgrade your plan to add a subdomain to ESA. | Only the Enterprise Edition supports creating sites with subdomains. Upgrade your plan. | |
| 400 | SYSTEM.NoSpecificCodeFailed | Invalid subscription duration. Check and try again. | The plan purchase cycle you configured is incorrect. Check the configuration and try again. | |
| 400 | TooManyDimensions | Too many query dimensions specified. Delete some and try again. | You configured too many data query dimensions. Delete some query dimensions and try again. | |
| 400 | TooManyRequests | Too many requests.Please try again later. | The request is too frequent. Try again later. | |
| 429 | TooManyRequests | Too many requests are submitted. | Submissions are too frequent. Try again later. | |
| 429 | TooManyRequests | System load fluctuates, please try again later. | The system load is fluctuating. Try again later. | |
| 429 | TooQuickRequests | Request for putting or deleting keys are frequently submitted. | The key-value pair modification or deletion operations are too frequent. | |
| 400 | TransportLayerApplicationConflict | The Layer -4 accelerated application conflicts with other applications. Check whether the application name and host record conflict with other applications in the site. | The Layer 4 acceleration application you are operating on conflicts with other applications. Check whether the application name, hostname, or other settings conflict with other applications under the site. | |
| 400 | TransportLayerApplicationNotExist | The layer -4 accelerated application of the current operation does not exist. Modify it and try again. | The Layer 4 acceleration application you are operating on does not exist. Modify the configuration and try again. | |
| 400 | TransportLayerRulesExceedLimit | The configured forwarding rules have exceeded the maximum limit. Delete useless forwarding rules and try again. | The forwarding rules you configured have exceeded the maximum limit. Delete unused forwarding rules and try again. | |
| 400 | TrialService.HasOpened | You have already activated the trial service. | You have already activated the trial service. Duplicate activation is not allowed. | |
| 403 | Unauthorized.InvalidParameters | The specified authentication parameters are invalid. | The authentication parameter is incorrect. | |
| 403 | Unauthorized.InvalidTime | The specified authentication time is invalid. | The authentication time parameter you entered is invalid. Check the parameter value and try again. | |
| 403 | Unauthorized.InvalidToken | Token authentication failed. | The token you entered is invalid. Check and enter a valid token, and then try again. | |
| 422 | UnprocessableEntity | Failed to handle your request due to data conflicts or incorrect parameters, such as duplicate IP addresses being specified or parameter configurations remaining unchanged in an update request. Check and adjust your configurations and try again. | Your request cannot be processed. This may be caused by data conflicts or parameter errors, such as duplicate IP addresses or unchanged update parameters. Check and correct the issue, and then try again. | |
| 400 | Unsupported.ConvertRecord | Converting site records is not supported in migration tasks. | Converting site records is not supported during migration tasks. | |
| 400 | Unsupported.DomainSourceConvertToRecord | Converting the domain sources to a site record is not supported in migration tasks. | Converting the basic origin server of a domain name to a site record is not supported. | |
| 404 | UnsupportQuota | Unsupported quota is specified. Check and try again. | The current operation does not support this quota. Check whether the specified quota is valid. | |
| 400 | UpdateErServiceError | Failed to change the plan. You are only allowed to change your plan once within 24 hours. | You can change the billing method at most once within 24 hours. | |
| 400 | UpdateFreeCertificate.NotSupport | The free certificate does not support the update operation. | Free certificates do not support update operations. | |
| 400 | UpdowngradeConfigNoChange | Failed to change the configuration because the new configuration you specified is the same as the current one in use. Specify a correct configuration and try again. | The upgrade or downgrade configuration has not changed. | |
| 400 | UserOperationStatusIsLocked | You are calling an another routine related api. Please wait for the api finished, and try again later. | Another operation is in progress. Wait until the operation is complete and try again. | |
| 400 | UserQuantityExceed | Your current purchase quantity exceeds the available quantity. Please select a new quantity. | The purchase quantity exceeds the remaining available quota. Specify a valid quantity. | |
| 400 | UserWithoutConfLabel | Required tags missing. Configure tags and try again. | The required tag configuration is missing. Configure the required tags and try again. | |
| 400 | VerifyExpressionError | Dynamic expression is invalid. | The dynamic expression is invalid. | |
| 400 | VerifyNameServerFailed | The NS verification failed. Please configure the NS provided by ESA on the domain name management platform and try again. | The NS verification failed. Configure the NS records provided by ESA on your domain management platform and try again. | |
| 400 | VersionNotValid | The site does not have version management enabled, or the version number passed in does not exist. | The version management feature is not enabled for the site, or the specified version number does not exist. | |
| 400 | WaitingRoomEventNotExist | The waiting room event that you want to modify does not exist. Specify a valid one. | The waiting room event that you want to modify does not exist. Check and specify a valid waiting room event. | |
| 400 | WaitingRoomNotExist | The waiting room that you want to modify does not exist or does not belong to you. Confirm and try again. | The waiting room that you want to modify does not exist or does not belong to you. Verify the waiting room and try again. | |
| 400 | WaitingRoomRuleNotExist | The waiting room bypass rule that you want to modify does not exist. Specify a valid one. | The waiting room bypass rule that you want to modify does not exist. Check and specify a valid waiting room bypass rule. | |
| 400 | WildcardRecordsExceedLimit | The number of pan records currently added has exceeded the system limit. If you want to add more pan records, please contact the background with a work order. | The number of wildcard records has reached the system limit. To add more wildcard records, submit a ticket. | |
| 400 | GitAccountNotExist | Git account does not exist. | The Git account does not exist. | |
| 400 | InvalidRoutineBuildTaskStatus | Routine build configuration state that does not exist. | The Routine build configuration status does not exist. | |
| 400 | RoutineInstanceNotExist | The Routine instance does not exist. | The Routine instance does not exist. | |
| 400 | GitAccountAuthExpired | Git account authorization expired. | The Git account authorization has expired. | |
| 400 | GitAccountAlreadyExist | The Git account already exists and cannot be created repeatedly. | The Git account already exists. Duplicate creation is not allowed. | |
| 400 | GitAccountNotActive | Git account is not active. | The Git account is not in the active state. | |
| 400 | RoutineNotExist | Routine does not exist. | The Routine does not exist. | |
| 400 | RoutineBuildTaskNotExist | Routine build task does not exist. | The Routine build task does not exist. | |
| 400 | IllegalNodeVersion | NodeVersion parameter is illegal. | The NodeVersion parameter is invalid. | |
| 400 | RoutineBuildConfigurationNotExist | Routine build configuration does not exist. | The Routine build configuration does not exist. | |
| 400 | RoutineBuildConfigurationExist | Routine build configuration already exists. | The Routine build configuration already exists. | |
| 400 | RoutineBuildTaskNotBuilding | The state of the Routine build task is not building. | The Routine build task is not in the building state. | |
| 400 | GitAccountExceedQuota | The number of Git accounts exceeds the quota limit. A user can only associate up to 20 Git accounts. | The number of Git accounts exceeds the quota limit. Each user can associate a maximum of 20 Git accounts. | |
| 400 | EnvironmentVariableKeyValueTooLong | The key/value length in the EnvironmentVariable parameter exceeds the limit. The length of a single key is not greater than 100, and the length of a single value is not greater than 200. | The key or value length in the EnvironmentVariable parameter exceeds the limit. The maximum length of a single key is 100 characters, and the maximum length of a single value is 200 characters. | |
| 400 | EnvironmentExceedLimit | The environment variable parameter exceeds the limit, and the number of keys and values exceeds the limit. | The environment variable parameter exceeds the limit. The number of keys and values exceeds the allowed maximum. | |
| 400 | RepositoryExceedLimit | One code repository can only be associated with up to 10 Routine build configurations. | A code repository can be associated with a maximum of 10 Routine build configurations. | |
| 400 | CanNotOpenCrossBorderOptimization | Can not open cross border optimization. | Chinese mainland network access optimization cannot be enabled. | |
| 400 | CustomHostname.ConflictWithExistingResource | The custom hostname conflicts with existing resources, such as sites, records, load balancers, source address pools, custom hostnames and Layer 4 proxy records. | The custom hostname conflicts with an existing resource, such as a site, record, load balancing instance, origin IPAM pool, custom hostname, or Layer 4 proxy. | |
| 400 | QuotaExceed.CustomHostname | The number of custom hostnames exceeds the plan quota. Contact the sales team to increase your quota. | The number of custom hostnames has reached the limit. Contact your sales representative to increase the quota. | |
| 400 | CustomHostname.InvalidICP | The specified website does not have an ICP filing or the filing information is invalid. Make sure your website is filed and try again. | The custom hostname that you configured has not obtained an ICP filing, or the ICP filing information is invalid. Ensure that the site has completed the ICP filing and try again. | |
| 200 | CustomHostname.VerifyUnpassed | The custom hostname ownership verification failed. Complete the verification and try again. | The custom hostname ownership verification failed. Ensure that the custom hostname ownership verification is passed and try again. | |
| 400 | Record.SourceOfExistingCustomHostnames | Failed to delete the record because it is the source of existing custom hostnames.Remove all references to the record and try again. | The record is an origin server of an existing custom hostname and cannot be deleted. Remove the reference and try again. | |
| 404 | CustomHostname.NotFound | The custom hostname does not exist. Modify it and try again. | The custom hostname does not exist. Modify the value and try again. | |
| 400 | Record.ProtectedAsCustomHostnameSource | Failed to delete the record because it is the origin server of existing custom hostnames.Remove all references to the record and try again. | The record is an origin server of an existing custom hostname and cannot be deleted. Remove all references to this record and try again. | |
| 400 | Record.ProxiedAsCustomHostnameSource | Failed to disable proxy the record because it is the origin server of existing custom hostnames.Remove all references to the record and try again. | The record is an origin server of an existing custom hostname. The proxy cannot be disabled. Remove all references to this record and try again. | |
| 400 | Record.TypeProtectedAsCustomHostnameSource | Failed to update the record type because it is the origin server of existing custom hostnames. The record can only be updated to CNAME or A/AAAA types. Alternatively, remove all references to the record and try again. | The record is an origin server of an existing custom hostname and cannot be changed to a record type other than CNAME or A/AAAA. Remove all references to this record and try again. | |
| 400 | CustomHostname.ServiceBusy | The custom hostname is being configured. Try again later. | The custom hostname is being configured. Try again later. | |
| 400 | InvalidParameter.Domains | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. The upper limit of lets encrypt type domain name is 50, the upper limit of digicert single type domain name is 1, and the upper limit of digicert wildcard type domain name is 1. | The maximum number of domain names specified by parameter Domains has been reached. Adjust your configurations and try again. The upper limit of lets_encrypt type domain name is 50, the upper limit of digicert_single type domain name is 1, and the upper limit of digicert_wildcard type domain name is 1. | |
| 400 | FunctionArgConflict.OriginProtection | The automatic enabling of the latest back-to-source IP list and the back-to-source convergence are mutually exclusive functions and cannot be enabled at the same time. | The automatic update of the latest back-to-origin IP list for origin protection and back-to-origin convergence are mutually exclusive features and cannot be enabled at the same time. | |
| 400 | ForbidUpdateSite.ConfigurationsUnclosed | If there are unclosed configurations, please close them before migrating. | Some configurations are still enabled. Disable them before performing the migration. | |
| 400 | ForbidUpdateSite.PlanUnallowed | Site migration between preset plans and customized enterprise plans is not supported. | Migrating sites between the China site plan and the enterprise plan is not supported. | |
| 400 | SiteFunction.WafPageNotExist | The custom page referenced in the custom response code configuration does not exist. | The custom page referenced in the custom response code configuration does not exist. | |
| 400 | InvalidParameter_SchemaId | The parameter SchemaId is invalid. | The SchemaId parameter is invalid. | |
| 400 | InvalidParameter_IdentifierId | The parameter Identified is invalid. | The Identified parameter is invalid. | |
| 400 | InvalidParameter_SchemaNotFound | The parameter schemaId conf not found. | The schema configuration corresponding to the SchemaId parameter was not found. | |
| 400 | InvalidParameter.ApiShieldQuota | This site does not have permission to manipulate API security features. | The site does not have permission to operate the API security feature. | |
| 400 | InvalidParameter.RuleName | The parameter RuleName is invalid. | The RuleName parameter is invalid. | |
| 400 | InvalidParameter.EndpointIds | The parameter EndpointIds is invalid. | The EndpointIds parameter is invalid. | |
| 400 | InvalidParameter.TokenConfigs | The parameter TokenConfigs is invalid. | The TokenConfigs parameter is invalid. | |
| 400 | InvalidParameter.TokenConfigs.Tag | The parameter TokenConfigs.Tag is invalid. | The Tag field in the TokenConfigs array is invalid. | |
| 400 | InvalidParameter.RuleId | The parameter RuleId is invalid. | Parameter error. The rule ID is invalid. | |
| 400 | InvalidParameter.IdentifierId | The parameter IdentifierId is invalid. | The IdentifierId parameter is invalid. | |
| 400 | SameNameRecordExceedLimit | The number of records with the same name exceeds the upper limit. | The number of records with the same name exceeds the upper limit. | |
| 400 | InvalidParameter.RuleAction | The parameter RuleAction is invalid. | The RuleAction parameter is invalid. | |
| 400 | InvalidParameter.TokenValidateType | The parameter TokenValidateType is invalid. | The TokenValidateType parameter is invalid. | |
| 400 | InvalidParameter.TokenName | The parameter TokenName is invalid. | The TokenName parameter is invalid. | |
| 400 | InvalidParameter.ManagedApi.StateCanNotChanged | The status of the managed API is not allowed to be modified. | The managed API status does not allow modification. | |
| 400 | InvalidParameter.TokenNameExists | The parameter TokenName already exists. | The TokenName parameter already exists. | |
| 400 | InvalidParameter.Identifier.Quota | The session identifier quota for the corresponding tier at the request site is insufficient. | The session identifier quota for the plan associated with the requested site is insufficient. | |
| 400 | InvalidParameter.Credentials.Alg | The internal Alg field of the input parameter Credentials is invalid. | The Alg field in the Credentials parameter is invalid. | |
| 400 | InvalidParameter.TokenUsed | The parameter TokenId token configuration is in use. | The token configuration specified by the TokenId parameter is currently in use. | |
| 400 | InvalidParameter.ManagedApi.Quota | The management API quota of the corresponding package of the request site exceeds the limit. | The managed API quota for the plan associated with the requested site has been exceeded. | |
| 400 | InvalidParameter.Position | The parameter Position is invalid. | The Position parameter is invalid. | |
| 400 | InvalidParameter.TokenId | The parameter TokenId is invalid. | The TokenId parameter is invalid. | |
| 400 | InvalidParameter.Credentials | The parameter Credentials is invalid. | The Credentials parameter is invalid. | |
| 400 | InvalidParameter.Credentials.KidRepeat | The internal field Kid of the input parameter Credentials is duplicate. | The Kid field in the Credentials parameter is duplicated. | |
| 400 | InvalidParameter.Credentials.Kid | The internal field Kid of the input parameter Credentials is configured to be empty. | The Kid field in the Credentials parameter is empty. | |
| 400 | InvalidParameter.TokenSources.Repeated | The input parameter TokenSources internal field configuration is duplicate. | The fields in the TokenSources parameter are duplicated. | |
| 400 | InvalidParameter.TokenSources.Empty | The internal field of the input TokenSources is invalid. | The fields in the TokenSources parameter are invalid. | |
| 400 | InvalidParameter.TokenSources | The parameter TokenSources is invalid. | The TokenSources parameter is invalid. | |
| 400 | InvalidParameter.TokenType | The parameter TokenType is invalid. | The TokenType parameter is invalid. | |
| 400 | InvalidParameter.SourceIpInBlacklist | The provided source is an invalid private IP address. Please verify and resubmit. | The address you entered is an invalid internal network address. Check and modify the address, and then submit again. | |
| 400 | InvalidParameter.PrivateIpAsSourceUnsupported | The provided source is an invalid private IP address. Please verify and resubmit. | The address you entered is an invalid internal network address. Check and modify the address, and then submit again. | |
| 400 | InvalidParameter.PrivateIpAsSourceUnsupported | The provided origin is an invalid private IP address. Please verify and resubmit. | The origin server address you entered is an invalid internal network address. Check and modify the address, and then submit again. | |
| 400 | InvalidParameter.SourceIpInBlacklist | The provided origin is an invalid private IP address. Please verify and resubmit. | The origin server address you entered is an invalid internal network address. Check and modify the address, and then submit again. | |
| 400 | InvalidParameter.ManagedApi.NotChanged | The status of the managed API is not allowed to be modified. | The managed API status does not allow modification. | |
| 400 | InvalidParameter.ManagedApi.Quota | The API management quota of the corresponding package of the request site is insufficient. | The API management quota for the plan associated with the requested site is insufficient. | |
| 400 | InvalidParameter.Position | The input parameter Position is invalid. | The Position parameter is invalid. | |
| 400 | InvalidParameter.ApiActions | The input parameter ApiActions is invalid. | The ApiActions parameter is invalid. | |
| 400 | InvalidParameter.ApiRule.Quota | The API rule quota of the corresponding package of the request site is insufficient. | The API rule quota for the plan associated with the requested site is insufficient. | |
| 400 | InvalidParameter.RuleNameExists | The input parameter RuleName is duplicated. | The RuleName parameter is duplicate. | |
| 400 | InvalidParameter.Token.Quota | The session token quota for the corresponding tier at the request site is insufficient. | The token quota for the plan associated with the requested site is insufficient. | |
| 400 | AmountExceed.Entranceplan | The parameter Amount exceeds the number of entrance plan that can be purchased. | The Amount parameter exceeds the quantity available for purchase under the free tier. | |
| 400 | FreePlanOrderUnpaid | Please complete your pending order for the free plan. | You have an unpaid free tier order. Pay the order before placing a new one. | |
| 400 | QuotaExceed.FreePlan | Your account has reached the maximum allowed quota for free plan purchases. | The quota for the free tier is insufficient. | |
| 400 | Record.UnmatchedRecordNameOnlyRangeChars | Illegal host record character. Only lowercase a-z, uppercase A- Z, digits 0-9, some special characters are supported as valid characters in host records. | The hostname record contains invalid characters. Valid characters include lowercase letters a-z, uppercase letters A-Z, digits 0-9, hyphens (-), underscores (_), periods (.), asterisks (*), and at signs (@). | |
| 400 | Record.InvalidHTTPURLValueWithCAARecordTag | The CAA record is prefixed with http:// or https://, it must be followed by a valid URL. | When you create or edit a CAA record and the Tag is iodef with a Value prefixed by http:// or https://, the prefix must be followed by a valid URL. | |
| 400 | IPA.FunctionConflict | KeepAliveProtection is conflicted with StaticIp and CrossBorderOptimization are conflict, can not open at same time. | The connection keep-alive protection feature conflicts with the static IP and Chinese mainland network access optimization features. These features cannot be enabled at the same time. | |
| 400 | IPA.CanNotEnableKeepAliveProtection | Both domestic and overseas DDoS protection must be set to a level higher than basic protection. | The DDoS mitigation specification for the Chinese mainland and outside the Chinese mainland cannot be set to basic protection. | |
| 400 | Site.HasIpaEnableKeepAliveProtection | The site has one or more IPA apps with keep-alive-protection enabled, so it cannot update the coverage or the instance. | A Layer 4 proxy application under the site has connection keep-alive protection enabled. You cannot switch the acceleration region or change the plan for the site. | |
| 400 | Instance.HasIpaEnableKeepAliveProtection | The site associated with this instance has one or more IPA apps with keep-alive-protection enabled. Both domestic and overseas DDoS protection cannot be disabled. | A Layer 4 proxy application under the site associated with this DDoS instance has connection keep-alive protection enabled. You cannot disable DDoS mitigation for the Chinese mainland or outside the Chinese mainland. | |
| 400 | IPA.KeepAliveProtectionConflict | KeepAliveProtection is conflicted with StaticIp and CrossBorderOptimization, can not open at same time. | The connection keep-alive protection feature conflicts with the static IP and Chinese mainland network access optimization features. These features cannot be enabled at the same time. | |
| 400 | PlanOrderUnpaid | You have an unpaid ESA order. Please complete or void the order at the User Center before placing another order. | You have an unpaid ESA order. Pay or cancel the order in User Center before placing a new one. | |
| 400 | InvalidParameter.ApiShieldSellVerison | The site does not have permissions to manipulate the enterprise-level capabilities of API security features. | The site does not have the permissions for enterprise-level API security features. | |
| 400 | SiteHasCrossBorderOptimization | Chinese Mainland Network is enabled for this site. Please disable Chinese Mainland Network and try again. | The site has Chinese mainland network acceleration enabled. Disable Chinese mainland network acceleration and try again. | |
| 400 | LoadBalancer.NameInvalid | The name of the Server Load Balancer instance is a valid domain name or belongs to the site. Check that it is correct and try again. | The name of the load balancing instance is a valid domain name or belongs to the site. Verify the name and retry. | |
| 400 | SiteHasCustomPorts | Custom ports is enabled for this site. Please disable custom ports and try again. | A record under the site has custom ports enabled. Disable custom ports and try again. | |
| 400 | FunctionArgError | Failed to check the configured function parameters. | The configured feature parameter check failed. | |
| 400 | ERBuildTast.NotExist | The ER build task does not exist or does not match the user, please check that it is correct and try again. | The ER build task does not exist or does not match the user. Verify the information and try again. | |
| 400 | OriginPool.TypeNotSupport | The origin address pool type is not supported. | The origin address pool type is not supported. | |
| 400 | Site.NotActive | The status of the applied site or site is not activated. | The site of the application or the site status is not active. | |
| 400 | CustomHostname.ApplyCertFailed | Fail to apply a free cert for custom hostname. Please try again later. | Failed to apply for a free certificate for the custom hostname. Try again later. | |
| 400 | CustomHostname.SetCertFailed | Fail to deploy a cert for custom hostname. Please try again later. | Failed to deploy the certificate for the custom hostname. Try again later. | |
| 400 | ConfigNotFound | The specified configuration does not exist. | The specified configuration does not exist. | |
| 400 | ERBuildTask.NotExist | The ER build task does not exist or does not match the user, please check that it is correct and try again. | The ER build task does not exist or does not match the user. Verify the information and try again. | |
| 400 | QuotaCheckFailed.CustomPort | The current package does not support configuring custom ports. Please check the package description and upgrade your package. | The current plan does not support custom port configuration. Check the plan description and upgrade your plan. | |
| 400 | CustomHostname.CheckQuotaFailed | Fail to check quota for custom hostname. Please try again later. | Failed to check the custom hostname quota for the site. Try again later. | |
| 400 | InvalidParameter.Port | Invalid port. Enter a valid port as required by the interface documentation. | Invalid port. Enter a valid port as required by the interface documentation. | |
| 400 | CustomHostname.OfflineForMultiReason | Unable to activate the custom hostname because it is offline due to multiple reasons. | The custom hostname has been taken offline for multiple reasons and cannot be activated. | |
| 400 | Site.QuotaFull | The instance site count quota is full. | The site quota for the instance has been reached. | |
| 400 | InvalidParameter.RecordPortExceedLimit | The number of recorded ports exceeds the limit, including 80 or 443 ports, and supports a maximum of 21 ports. Please adjust and try again. | The number of record ports exceeds the limit. If port 80 or 443 is included, a maximum of 21 ports are supported. Adjust the configuration and try again. | |
| 400 | CustomHostname.QueryCasCertFailed | Fail to query CAS certificate details. Please try again later. | Failed to query the China Shield certificate details. Try again later. | |
| 400 | CustomHostname.WildcardDomainRequireEnterprisePlan | Wildcard custom hostnames require an Enterprise plan. | Only Enterprise Edition plans support adding wildcard SaaS domain names. Upgrade your plan and try again. | |
| 400 | SiteOrVersion.NotExist | The specified website or website version does not exist or is not recognized by the system. Check whether the specified website or website version identifier is valid and matches a website that is active, defined, and recognized by the system.If you want to add a new website or website version, make sure that the creation and registration process is complete to integrate the website to the system. | The specified site or site version does not exist or is not currently recognized by the system. Verify that the site identifier is correct and that it matches a defined, currently active site or site version that is accessible within the recognized site network. If the site or site version is newly added, make sure that the appropriate creation or registration process has been completed to integrate it into the system. | |
| 400 | Ato.ApiAsset.NotExist | The specified ATO API asset does not exist. | The specified account security API asset does not exist in the current context or system configuration. Verify the API asset identifier and make sure that it has been correctly defined or implemented. | |
| 400 | Ato.ProtectionStrategy.NotExist | The specified ATO protection strategy does not exist. | The specified account security protection policy does not exist in the current context or system configuration. Confirm the security protection policy identifier and make sure that it has been correctly defined or implemented. | |
| 400 | Ato.ProtectionStrategy.BeingBound | The specified ATO protection strategy is being bound. | The specified account security protection policy is attached to one or more protection rules. | |
| 400 | Site.HasStaticIP | This operation is not allowed because the site has static IP enabled. | The site has static IP enabled. This operation is not allowed. | |
| 400 | NotEnoughResource.CustomPort | Resource verification failed because there are not enough IP resources. | Resource verification failed. Insufficient IP resources are available. | |
| 400 | Site.HasCN2 | The website has enabled CN2, and this operation is not allowed. | The site has Chinese mainland network access optimization enabled. This operation is not allowed. | |
| 400 | Ato.ApiAsset.AlreadyBound | The specified ATO API asset already bound by another rule. | The specified ATO API asset is already bound to another rule. | |
| 400 | Site.HasIpaEnableKeepAliveProtection | The site has one or more TCP/UDP proxied applications with keep-alive-protection enabled. Its acceleration region or plan can't be edited. | A Layer 4 proxy application under the site has connection keep-alive protection enabled. You cannot switch the acceleration region or change the plan for the site. | |
| 400 | IPA.CanNotEnableKeepAliveProtection | The site has one or more TCP/UDP proxied applications with keep-alive-protection enabled. Its acceleration region or plan can't be edited. | The DDoS mitigation specification for the Chinese mainland and outside the Chinese mainland cannot be set to basic protection. | |
| 400 | ProjectAccessDenied | You do not have access to this project. | You do not have permission to access this project. | |
| 400 | AIGWService.HasOpened | Your AI gateway service has opened. | You have already activated the AI gateway service. You do not need to activate it again. | |
| 400 | NotInternationRealIdentity | Real-name registration is required for services offered in Mainland China. | In accordance with the laws of the People's Republic of China, users who purchase and use information services within China must complete real-name registration. | |
| 403 | Page.Site.AleadyBound | The specified site has already been associated with another custom error page of the same type. Dissociate the site from the existing page and try again. | The specified site is already bound to another custom response page of the same type. Disassociate the site from the existing page and try again. | |
| 403 | Page.SiteAlreadyBound | The specified site has already been associated with another custom error page of the same type. Dissociate the site from the existing page and try again. | The specified site is already bound to another custom response page of the same type. Disassociate the site from the existing page and try again. | |
| 400 | NotInternationalRealIdentity | Real-name registration is required for services offered in Mainland China. | In accordance with the laws of the People's Republic of China, users who purchase and use information services within China must complete real-name registration. | |
| 400 | InvalidParameter_ApiRuleId | A rule configuration exists for the requested API. Delete the relevant API rule configuration before deleting the corresponding API. | The requested API has rule configurations. Delete the associated API rule configurations before deleting the API. | |
| 400 | InvalidParameter_ApiSchemaId | The requested Api has a schema validation configuration. Delete the schema validation configuration before deleting the corresponding Api. | The requested API has schema validation configurations. Delete the associated schema validation configurations before deleting the API. | |
| 400 | InvalidParameter_ApiIdentifierId | The Api to be deleted has a session identifier configuration. Delete the session identifier configuration before deleting the corresponding Api. | The API that you want to delete has session identifier configurations. Delete the session identifier configurations before deleting the API. | |
| 400 | InvalidParameter.ApiShieldSellVersion | The site does not have permissions to manipulate the enterprise-level capabilities of API security features. | The site does not have the permissions for enterprise-level API security features. | |
| 400 | Record.RecordNameConflictWithDSName | The record name cannot have the same name as the DS type record. | When you create or edit a DNS record, the record name cannot be the same as a DS record name. | |
| 400 | Record.RecordNameConflictWithEdgeFunctionRoutineRecordName | The record name cannot have the same name as the Routine inner type record name in Edge Function. | When you create or edit a DNS record, the record name cannot be the same as an Edge Routine record name. | |
| 400 | OriginPool.CheckQuotaFailed | Failed to check source pool quota for site, please try again later. | Failed to check the origin address pool quota of the site. Try again later. | |
| 400 | CustomHostname.InvalidStatus | The status of the custom hostname you configured is invalid, and this operation cannot be performed. Please check the status of the custom hostname and try again. | The custom hostname that you configured has an invalid status. This operation cannot be performed. Check the custom hostname status and try again. | |
| 400 | InvalidParameter.StartEndTimeErr | There is a logic error in the time-related field of the request input parameter. | The time-related fields in the request parameters contain a logical fault. | |
| 400 | InvalidParameter.ApiShieldRiskDetectionPolicyConfigurationQuota | This site does not have permissions to view API security risk detection and policy management. | The site does not have the permission to view API security risk detection and policy management information. | |
| 400 | InvalidParameter.RulesFormat | The input rules format specification of the request does not meet the requirements. | The format of the Rules parameter in the request does not meet the requirements. | |
| 400 | InvalidParameter.RuleCountExceedsLimit | The number of API security policy rules created exceeds the limit. | The number of API security policy rules that you created exceeds the upper limit. | |
| 400 | InvalidParameter.AbnormalLevel | The request input parameter AbnormalLevel field is invalid. | The AbnormalLevel parameter in the request is invalid. | |
| 400 | InvalidParameter.StatusList | The request input parameter StatusList field is invalid. | The StatusList parameter in the request is invalid. | |
| 400 | InvalidParameter.ApiTag | The request input parameter ApiTag field is invalid. | The ApiTag parameter in the request is invalid. | |
| 400 | InvalidParameter.EndTime | The format of the EndTime-related fields in the request parameters is invalid. | The format of the EndTime parameter in the request is invalid. | |
| 400 | InvalidParameter.StartTime | The format of the StartTime-related fields in the request parameters is invalid. | The format of the StartTime parameter in the request is invalid. | |
| 400 | InvalidParameter.StartEndTimeErr | The logic of the request input start and end time is unreasonable. | The start time and end time in the request parameters are logically invalid. | |
| 403 | PaidCrawling.Disabled | Paid crawling feature is not enabled, cannot set action to paid crawling. | The paid crawling setting is not enabled. | |
| 403 | PaidCrawling.InUse | Cannot disable paid crawling while existing rules still reference it. | The paid crawling setting cannot be disabled when rules that use the paid crawling action exist. | |
| 400 | ErrorRedemptionCodeNotInvalidDomain | The domain is invalid. | The domain name is invalid. | |
| 400 | ErrorRedemptionCodeDomainInEsa | Domain already in ESA in the last 30 days. | The domain name was connected to ESA within the past 30 days. | |
| 400 | ErrorRedemptionCodeNotRootDomain | The domain name is not a root domain name. | The domain name is not a root domain name. | |
| 400 | ErrorRedemptionCodeNocodeLeft | Insufficient redemption code inventory. | The redemption code inventory is insufficient. | |
| 400 | ErrorRedemptionCodeAlreadyClaimed | User already claimed a redemption code. | The user has already claimed a redemption code. |
该文章对您有帮助吗？