Public error codes
Updated at:
Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 404 | ResourceNotFound.VPC | The specified resource of %s is not found. | The specified VPC does not exist. | |
| 400 | IllegalParam.TagValue | The param of %s is illegal. | The value of the TagValue parameter is invalid. | |
| 400 | IllegalParam.TagKey | The param of %s is illegal. | The value of the TagKey parameter is invalid. | |
| 400 | MissingParam.TagValue | The parameter TagValue is mandatory. | The TagValue parameter is missing. | |
| 400 | MissingParam.TagKey | The parameter TagKey is mandatory. | The TagKey parameter is missing. | |
| 400 | IllegalParam.AliUid | The param of %s is illegal. | The value of the AliUid parameter is invalid. | |
| 400 | Conflict.VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr | The VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr [%s] is conflict. | VSwitchCidrReservationMask does not match VSwitchCidrReservationCidr. | |
| 400 | IllegalParam.Ipv6LeaseTime | Ipv6LeaseTime [%s] is illegal. | The specified Ipv6LeaseTime parameter is invalid. | |
| 400 | OperationDenied.UnsupportedUpdateCloudServiceRoute | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | The operation is not allowed because the current account does not have permission to update VPC cloud service routes. | |
| 400 | OperationDenied.CidrConflictWithExistCidr | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry. | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry %s. | |
| 400 | OperationDenied.UnsupportedEssentialOnlyRouteMode | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | The operation is not allowed because the current account does not have permission to use the EssentialOnly routing mode. | |
| 400 | OperationDenied.CloudBoxVSwitchNotExist | The specified cloud box VSwitch does not exist in the opposite VPC. Please ensure the opposite VPC has a cloud box VSwitch before creating the router interface. | The specified cloud box vSwitch does not exist in the peer VPC. Make sure that a cloud box vSwitch exists in the peer VPC before you create a router interface. | |
| 400 | OperationFailed.VbrNotEnableIpv6 | IPv6 is not enabled for the specified VirtualBorderRouter. Please enable IPv6 on the VBR before configuring IPv6 addresses. | The specified virtual border router does not have IPv6 enabled. Enable IPv6 on the VBR before you configure an IPv6 address. | |
| 400 | OperationFailed.VbrAttachCenOrEcrOnlyStableStatus | The VirtualBorderRouter is currently attaching to CEN or ECR and is in a transitional state. Please wait until the attachment reaches a stable status before retrying. | The virtual border router is currently being associated with a CEN or ECR and is in an intermediate state. Wait until the association operation reaches a stable state and try again. | |
| 400 | UnsupportedFeature.FlowEncryption | The flow log does not support subscription flow-encryption fields. | Flow logs do not support subscribing to the flow-encryption field. | |
| 400 | UnsupportedFeature.LogFormatNisTrafficAnalyze | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | You cannot subscribe to custom fields for flow logs with NIS network traffic analysis enabled. | |
| 400 | UnsupportedFeature.LogFormat | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | The custom subscription fields feature for flow logs is not yet available. | |
| 400 | OperationDenied.NisRequiredFieldMissing | Required fields required by NIS Traffic Analyzer are not subscribed. | You have not subscribed to the required fields for NIS Traffic Analyzer. | |
| 400 | OperationDenied.UnsupportedField | LogFormat contains unsupported fields. | LogFormat contains unsupported fields. | |
| 400 | IllegalParam.LogFormat | The specified parameter of LogFormat is invalid. | The specified LogFormat parameter is invalid. | |
| 400 | InvalidParam.RouterInstanceOrRouterId | The parameters routerInstanceId and routerId are mutually exclusive. Please use either routerInstanceId alone, or routerType with routerId. | The request contains conflicting parameters. You must provide only routerInstanceId, or provide both routerType and routerId. Remove the conflicting parameter combination from the request. | |
| 400 | OperationDenied.PrefixList | The prefix list is created by ECS and cannot be modified via VPC API. | The prefix list was created by ECS and cannot be modified by using the VPC API. | |
| 400 | IncorrectStatus.RouteTableStatus | Route table [%s] status [%s] is not stable. Please try again later. | The route table [%s] is in the [%s] state, which is not a stable state. Try again later. | |
| 400 | DependencyViolation.NATGW | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | The vSwitch cannot be deleted because it contains undeleted NAT gateways. Delete the NAT gateways under the vSwitch before you delete the vSwitch. | |
| 500 | ParamExclusive.SourceVSwitchIdAndsourceCIDR | Parameters sourceVSwitchId and sourceCIDR are conflicted. | The sourceVSwitchId and sourceCIDR parameters conflict. You can specify only one of them. | |
| 400 | IllegalParam.OriginalCidr | The specified OriginalCidr is not a valid IPv4 CIDR block. | The specified OriginalCidr is not a valid IPv4 CIDR block. | |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | The operation is denied because the resource is a shared resource. | |
| 400 | OperationDenied.HasSecondaryZone | The operation is not allowed because the VSwitch has a secondary zone. | The operation is not allowed because the vSwitch has a secondary zone. | |
| 400 | OperationDenied.VpcIpv6CidrBlockNotExist | The specified VpcIpv6CidrBlock does not exist in the VPC. | The specified VpcIpv6CidrBlock does not exist in the VPC. | |
| 400 | OperationDenied.AvailableCidrInsufficient | Insufficient available CIDR blocks for allocation. This is either because the VPC has no remaining address space, or because the candidate CIDR contains destination networks of active non-system routes in the VPC. | There are insufficient available CIDR blocks for allocation. This may be because the VPC address space is exhausted, or the candidate CIDR contains the destination CIDR block of an active non-system route in the VPC. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The specified Ipv6CidrMask is invalid, only %s is allowed. | The specified Ipv6CidrMask is invalid. Only %s is allowed. | |
| 400 | ParamExclusive.CidrBlockAndCidrMask | CidrBlock and CidrMask are mutually exclusive. | The CidrBlock and CidrMask parameters are mutually exclusive. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Ipv6CidrBlock or Ipv6CidrMask must be specified. | You must specify Ipv6CidrBlock or Ipv6CidrMask. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask must be specified. | You must specify CidrBlock or CidrMask. | |
| 400 | CalculateNatCapacity.CpsNotPositive | Cps must be positive. | Cps must be a positive number. | |
| 400 | CalculateNatCapacity.PpsNotPositive | Pps must be positive. | Pps must be a positive number. | |
| 400 | CalculateNatCapacity.BandwidthNotPositive | Bandwidth must be positive. | The bandwidth must be a positive number. | |
| 400 | CalculateNatCapacity.MetricRequired | PerformanceValues must have at least one field when CapacityUnits is not provided. | You must specify at least one metric. | |
| 400 | CalculateNatCapacity.InputRequired | Either NatGatewayCapacity.CapacityUnits or PerformanceValues must be provided. | You must specify Cu or a metric value. | |
| 400 | InvalidCu.NotPositive | CapacityUnits must be positive. | The specified CU must be a positive number. | |
| 400 | InvalidCu.ExceedMaximum | CU %s exceeds maximum %s. | The number of CUs exceeds the maximum limit. | |
| 400 | InvalidCu.BelowMinimum | CU %s is below minimum %s. | The number of CUs is less than the minimum limit. | |
| 400 | EquivalentCuExceeds.Maximum | Equivalent CU %s exceeds maximum %s. | The number of equivalent CUs exceeds the maximum limit. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | The quota for the number of IP addresses in the address pool is exceeded. To increase the quota, submit a ticket or contact your account manager. | |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | The quota for the number of EIPs is exceeded. To increase the quota, submit a ticket or contact your account manager. | |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | A local ISP Express Connect circuit can be released only 30 days after it is created. To delete it, try again after 30 days. | |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | The current business status of the Express Connect circuit does not support this operation. | |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | The state switchover delay command feature is not enabled in the current region. | |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | The access device does not support the LinkDelay feature. | |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | The value of the state switchover delay parameter is invalid. | |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | Shared Express Connect circuits do not support the configuration of state switchover delay commands. | |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | The state switchover delay command is not supported. | |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | IPv6 operations are not allowed when the vSwitch has a secondary zone. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | Specifying CidrBlock or CidrMask is not allowed in IPv6-only mode. | |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | The VPC does not have available CIDR space for allocation. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | The specified IPv6 mask is invalid. Only %s is supported. | |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock and Ipv6CidrMask cannot be specified at the same time. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | You must specify at least one of Ipv6CidrBlock and Ipv6CidrMask. | |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | You must specify at least one of CidrBlock and CidrMask. | |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask cannot be specified at the same time. | |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | The specified IPv6 ISP %s does not match the IPv6 ISP %s of the IPAM pool. | |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | Failed to create the Express Connect circuit because no access devices meet the requirements after redundant circuits are excluded. | |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | Failed to create the Express Connect circuit because no access devices support the specified optical module. | |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | Failed to create the Express Connect circuit because no access devices meet the advanced capability requirements. | |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | The CidrBlock and SecondaryCidrBlock parameters are mutually exclusive and cannot be specified at the same time. | |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | The operation is rejected because the narrowed target CIDR block does not cover the existing vSwitch CIDR block %s. | |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | The operation is rejected because the expanded target CIDR block overlaps with the existing CIDR block %s of the VPC. | |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | The operation is rejected because the target CIDR block does not overlap with the original CIDR block. CIDR block adjustment requires an overlap between the two. | |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | The operation is rejected because the target CIDR block is the same as the original CIDR block. No modification is required. | |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | The operation is rejected because the specified secondary CIDR block does not exist in the current VPC. | |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | You must specify the NewSecondaryCidrBlock parameter when modifying a secondary CIDR block. | |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | A required parameter is missing. You must specify at least one of CidrBlock and SecondaryCidrBlock. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | The zone where the vSwitch in the secondary zone is located does not support creating dual-tunnel VPNs. Change the vSwitch. | |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | The DisasterRecoveryVSwitchId parameter is missing. | |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | The vSwitch does not exist in the specified region. | |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber is supported only for the Prefix reservation type. | |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | You must specify one of IpPrefixNumber, VSwitchCidrReservationMask, and VSwitchCidrReservationCidr. | |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | The number of deep paging page skips has triggered throttling. Reduce the frequency of deep paging page skips, or use sequential paging. | |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | An ASN must be configured on the customer gateway when BGP is enabled for an IPsec-VPN connection. | |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | The specified policy-based route does not exist. | |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | The OwnerId parameter is invalid. Check the parameter and try again. | |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | The EcrInstanceId parameter is missing. | |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | The specified IP address does not exist. | |
| 400 | OperationFailed.Ipv6OnlyVSwitch | The operation is failed because the specified VSwitch is Ipv6 only. | The operation failed because the specified vSwitch is an IPv6-only vSwitch. | |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | The specified NAT gateway resource is not found when creating or modifying a route target group. | |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | The current operation does not support route target groups that contain NAT gateway members. | |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | The vSwitch associated with the specified NAT gateway is not found. | |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | Using NAT gateways as members of a route target group is not supported in this region. | |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | The ICMP echo reply feature must be enabled for NAT gateways in a route target group to ensure that ICMP probe packets can be properly responded to. | |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | Route target groups support only single-zone NAT gateways. | |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | The next hop of the IPv6 route does not have an IPv6 address. | |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | The NAT gateway is referenced by a route target group. Remove the reference first. | |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | The ICMP echo reply feature cannot be disabled because the NAT gateway is referenced by a route target group. | |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | The mask of the Cidr parameter or the CidrMask parameter is less than the minimum network mask length specified in the pool compliance rule. | |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | The mask of the Cidr parameter or the CidrMask parameter exceeds the maximum network mask length specified in the pool compliance rule. | |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | Undeleted IPsec-VPN connections exist on the specified VPN gateway. | |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | The router type is invalid. | |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | The router interface status is abnormal. | |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | The router ID associated with the router interface cannot be empty. Check the parameter and try again. | |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | No gateway route table is associated with the VPC IPv4 gateway that corresponds to the IP address bound to the EIP. | |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | Advanced port features are temporarily not supported. Try again later. | |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | The VPC is associated with the Express Connect Router (ECR) %s and cannot be deleted. | |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | The current user is not allowed to create single-zone NAT gateways. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | Parameter conflict: creating an IPv6-only vSwitch is not supported after an IPv4 CIDR block is specified. | |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | The specified resource is locked by the system and is temporarily unavailable for operations. | |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | The format of the authentication policy is invalid. | |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | Querying traffic data for the current month is not supported in the 95th percentile billing mode. | |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | The region parameter is not supported for this operation. | |
| 400 | NatInstance.NotFound | Instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | The operation failed because an IP address in the SNAT rule IP address pool is not added to an Internet Shared Bandwidth instance. | |
| 400 | Instance.NotFound | instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationUnsupported.User | The current user does not support this operation. | This operation is not supported for the current user. | |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | The operation failed because the region does not support the pay-as-you-go billing method. | |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | Order error: the billing method parameter is invalid. | |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | Order error: the basic parameter information is incomplete. | |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | The current instance does not support configuring FullNAT rules in domain name format. | |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | The current zone does not support configuring FullNAT rules in domain name format. | |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | This operation is not supported for the current route table status. Try again later. | |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | Failed to create the NAT gateway. | |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | This operation is temporarily not supported in the current region. | |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | The operation failed because the IP addresses in the SNAT rule IP address pool are added to multiple NAT service plans. | |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | The operation failed because the EIP is not associated with the NAT gateway. | |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | The NAT IP address is in an intermediate state. Try again later. | |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | The SNAT rule is in an intermediate or abnormal state. Try again later. | |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | The operation failed because the SNAT rule IP address pool is added to multiple NAT service plans. | |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | The operation failed because the EIP is not associated with the NAT gateway. | |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | The status of the traffic mirror source in the traffic mirror session is invalid. | |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | The status of the traffic mirror destination in the traffic mirror session is invalid. | |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | The current resource is still referenced by route entries. | |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | The operation is denied because MACsec keys are still associated with the Express Connect circuit. | |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | The Express Connect circuit supports MACsec, but does not support the selected encryption algorithm. | |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | The CKN to be disassociated does not exist. | |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | An Express Connect circuit can be associated with up to three sets of MACsec keys. | |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | The operation is not allowed because one or more MACsec keys are in an unstable state. | |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | The Express Connect circuit supports MACsec, but does not support the selected encryption algorithm. | |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | The Express Connect circuit does not support the MACsec feature. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | The current status of the Express Connect circuit does not support this operation. | |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | IKEv1 does not support configuring only the GCM16 encryption algorithm for IKE. | |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | The IP address of the customer gateway conflicts with the IP address of the VPN gateway. | |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | DES and 3DES do not support multi-algorithm compatibility in IKE and IPsec encryption algorithms. | |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | The TunnelBandwidth parameter is invalid. | |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | Creating a VPN attachment with large bandwidth is not supported. | |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | The current VPN instance does not support policy-based routing. | |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | The specified VPN gateway has undeleted IPsec-VPN servers. | |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | The AccessDomain request parameter is invalid. | |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | The specified AccessIp and AccessDomain parameters conflict with each other. | |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | The VLAN ID of the specified VBR is 0, which does not support disaster recovery drills. Use the Express Connect circuit for disaster recovery drills. | |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | The specified EIP allocation token has expired. | |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | Dual-stack flow log instances do not currently support the custom trafficPath feature. | |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | The maximum number of route target groups that can be created in the VPC has been exceeded. Increase the quota and try again. | |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | A primary/secondary switchover is not allowed when disabled members are in an abnormal health check state. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | Updating enabled members in the route target group is not allowed. | |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | Creating a vSwitch is not allowed because the current zone is disabled. | |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | The network ACL is being associated with or disassociated from a vSwitch. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | Updating enabled members in the route target group is not allowed. | |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | Member instances in the route target group cannot belong to the same zone. | |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | You cannot update the instance type of members in the route target group. | |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | The current zone is being decommissioned. You cannot create a vSwitch in a decommissioned zone. | |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | The RelationKey parameter is missing. | |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | The quota usage of NatIp and Ipv4Prefix exceeds the limit. | |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | The gateway does not support Ipv4Prefix. | |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | The quota usage of Ipv4Prefix exceeds the limit. | |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | The IP version of the prefix list specified in the request parameter does not match the actual IP version of the prefix list. | |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | Increasing the maximum number of entries for the prefix list will exceed the quota for the maximum number of entries of the associated network ACL instance. | |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | The operation is not allowed because the current physical port does not support advanced features such as MPBGP and MPBGP-v6. | |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | The deletion failed. The shared port or exclusive port must be deleted by its owner. | |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | The physical port cannot be deleted because it has associated Virtual Border Routers. | |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | The VPC route entry does not exist. | |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | A managed network interface controller (NIC) cannot be used as a traffic mirroring source. | |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | Resources associated with the VPC, such as Cloud Enterprise Network, are being reconfigured. Try again later. | |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | The VPC of the route target group does not match the VPC of the route target configuration instance. | |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | The operation is not allowed in the current state of the route target group. | |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | You cannot update the instance type of members in the route target group. | |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | Updating enabled members in the route target group is not allowed. | |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | The instance types configured in the route target group must be the same. | |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | The instances configured in the route target group cannot belong to the same zone. | |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | The Ipv4Prefix has already been created. Do not create it again. | |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | The Ipv4Prefix resource is not found. Check whether the Ipv4Prefix exists. | |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The NatIp or Ipv4Prefix has associated SNAT entries and cannot be deleted. Delete the dependent SNAT entries and try again. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid. It must be a /28 CIDR block. | |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | A NatIp that belongs to an Ipv4Prefix cannot be deleted separately. Delete the Ipv4Prefix directly. | |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid. It must be a /28 CIDR block. | |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | The DetectMultiplier parameter is missing. When configuring BFD packets, you must configure the send interval, receive interval, and detection time multiplier at the same time. | |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | The MinTxInterval parameter is missing. When configuring BFD packets, you must configure the send interval, receive interval, and detection time multiplier at the same time. | |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | The MinRxInterval parameter is missing. When configuring BFD packets, you must configure the send interval, receive interval, and detection time multiplier at the same time. | |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | The specified resource %s does not exist. | |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | The current region does not support the route target group feature. | |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | The DhcpOptionsSetId parameter is missing. | |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | The NatIp resource has already been allocated. | |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | The Ipv4Prefix has already been allocated. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | The Ipv4Prefix parameter is invalid. | |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | The NatIp parameter is invalid. | |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | The Ipv4Prefix does not match the reserved CIDR block for a vSwitch. | |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | The traffic mirroring service is already activated. Do not activate it again. | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | You cannot enable Internet bandwidth for an IPv6 address that is attached to a cloud service instance. | |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Ipv4Prefix resources are insufficient. | |
| 400 | OperationDenied.InvalidIpReservedByVSwitch | The specified ip address is the reserved address of the switch. | The specified IP address is a reserved address of the vSwitch. | |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The Ipv4Prefix resource does not exist. | |
| 404 | ResourceNotFound.VPC | The specified resource of %s is not found. | The specified VPC is not found. | |
| 400 | IllegalParam.TagValue | The param of %s is illegal. | The specified TagValue is illegal. | |
| 400 | IllegalParam.TagKey | The param of %s is illegal. | The specified TagKey is illegal. | |
| 400 | MissingParam.TagValue | The parameter TagValue is mandatory. | The parameter TagValue is mandatory. | |
| 400 | MissingParam.TagKey | The parameter TagKey is mandatory. | The parameter TagKey is mandatory. | |
| 400 | IllegalParam.AliUid | The param of %s is illegal. | The specified AliUid is illegal. | |
| 400 | Conflict.VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr | The VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr [%s] is conflict. | The specified VSwitchCidrReservationMask does not match the VSwitchCidrReservationCidr. | |
| 400 | IllegalParam.Ipv6LeaseTime | Ipv6LeaseTime [%s] is illegal. | The specified Ipv6LeaseTime parameter is illegal | |
| 400 | OperationDenied.UnsupportedUpdateCloudServiceRoute | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | |
| 400 | OperationDenied.CidrConflictWithExistCidr | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry. | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry %s. | |
| 400 | OperationDenied.UnsupportedEssentialOnlyRouteMode | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | |
| 400 | OperationDenied.CloudBoxVSwitchNotExist | The specified cloud box VSwitch does not exist in the opposite VPC. Please ensure the opposite VPC has a cloud box VSwitch before creating the router interface. | The specified CloudBox VSwitch does not exist in the peer VPC. Before creating a router interface, ensure that a cloud box VSwitch exists in the peer VPC. | |
| 400 | OperationFailed.VbrNotEnableIpv6 | IPv6 is not enabled for the specified VirtualBorderRouter. Please enable IPv6 on the VBR before configuring IPv6 addresses. | The IPv6 function is not enabled on the specified border router. Enable IPv6 on the VBR before configuring an IPv6 address. | |
| 400 | OperationFailed.VbrAttachCenOrEcrOnlyStableStatus | The VirtualBorderRouter is currently attaching to CEN or ECR and is in a transitional state. Please wait until the attachment reaches a stable status before retrying. | The border router is currently associated with CEN or ECR and is in the intermediate state. Wait for the associated operation to reach a steady state before retrying. | |
| 400 | UnsupportedFeature.FlowEncryption | The flow log does not support subscription flow-encryption fields. | The flow log does not support subscription flow-encryption fields. | |
| 400 | UnsupportedFeature.LogFormatNisTrafficAnalyze | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | |
| 400 | UnsupportedFeature.LogFormat | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | |
| 400 | OperationDenied.NisRequiredFieldMissing | Required fields required by NIS Traffic Analyzer are not subscribed. | Required fields required by NIS Traffic Analyzer are not subscribed. | |
| 400 | OperationDenied.UnsupportedField | LogFormat contains unsupported fields. | LogFormat contains unsupported fields | |
| 400 | IllegalParam.LogFormat | The specified parameter of LogFormat is invalid. | The format of the specified LogFormat parameter is illegal. | |
| 400 | InvalidParam.RouterInstanceOrRouterId | The parameters routerInstanceId and routerId are mutually exclusive. Please use either routerInstanceId alone, or routerType with routerId. | The request contains conflicting parameters. You need to provide only routerInstanceId, or both routerType and routerId. Please remove conflicting parameter combinations from the request. | |
| 400 | OperationDenied.PrefixList | The prefix list is created by ECS and cannot be modified via VPC API. | The prefix list is created by ECS and cannot be modified by using the VPC API. | |
| 400 | IncorrectStatus.RouteTableStatus | Route table [%s] status [%s] is not stable. Please try again later. | The specified route table is not in a stable state. | |
| 400 | DependencyViolation.NATGW | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | |
| 500 | ParamExclusive.SourceVSwitchIdAndsourceCIDR | Parameters sourceVSwitchId and sourceCIDR are conflicted. | The sourceVSwitchId and sourceCIDR of the parameters conflict. Only one of the parameters can be entered. | |
| 400 | IllegalParam.OriginalCidr | The specified OriginalCidr is not a valid IPv4 CIDR block. | The specified OriginalCidr is not a valid IPv4 CIDR block. | |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | The operation is not allowed on shared resources. | |
| 400 | OperationDenied.HasSecondaryZone | The operation is not allowed because the VSwitch has a secondary zone. | The operation is not allowed because the VSwitch has a secondary zone. | |
| 400 | OperationDenied.VpcIpv6CidrBlockNotExist | The specified VpcIpv6CidrBlock does not exist in the VPC. | The specified VpcIpv6CidrBlock does not exist in the VPC. | |
| 400 | OperationDenied.AvailableCidrInsufficient | Insufficient available CIDR blocks for allocation. This is either because the VPC has no remaining address space, or because the candidate CIDR contains destination networks of active non-system routes in the VPC. | The operation is denied due to insufficient available CIDR resources. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The specified Ipv6CidrMask is invalid, only %s is allowed. | The specified Ipv6CidrMask is invalid, only %s is allowed. | |
| 400 | ParamExclusive.CidrBlockAndCidrMask | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask are mutually exclusive. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Ipv6CidrBlock or Ipv6CidrMask must be specified. | Ipv6CidrBlock or Ipv6CidrMask must be specified. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask must be specified. | Adding a CIDR block to the address pool failed because the CIDR block or subnet mask parameter is missing. | |
| 400 | CalculateNatCapacity.CpsNotPositive | Cps must be positive. | Cps must be positive. | |
| 400 | CalculateNatCapacity.PpsNotPositive | Pps must be positive. | Pps must be positive. | |
| 400 | CalculateNatCapacity.BandwidthNotPositive | Bandwidth must be positive. | Bandwidth must be positive. | |
| 400 | CalculateNatCapacity.MetricRequired | PerformanceValues must have at least one field when CapacityUnits is not provided. | Any metric must be entered. | |
| 400 | CalculateNatCapacity.InputRequired | Either NatGatewayCapacity.CapacityUnits or PerformanceValues must be provided. | Cu or indicator value is required. | |
| 400 | InvalidCu.NotPositive | CapacityUnits must be positive. | The CU entered must be a positive number. | |
| 400 | InvalidCu.ExceedMaximum | CU %s exceeds maximum %s. | The CU exceeds the maximum limit. | |
| 400 | InvalidCu.BelowMinimum | CU %s is below minimum %s. | CU is less than the minimum limit. | |
| 400 | EquivalentCuExceeds.Maximum | Equivalent CU %s exceeds maximum %s. | Number of equivalent CUs exceeds the maximum limit. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | The number of IP addresses in the address pool exceeds the quota limit. | |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | The Eip quantity quota exceeds the limit. If you need to increase the quota, please raise a ticket or contact your account manager. | |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | Local ISP can only be released after 30 days of creation. If you want to delete it, please do so after 30 days. | |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | The current business status of the physical connection does not support operations. | |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | The current region is not open state switching delay command characteristic switch | |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | Access device does not support LinkDelay feature | |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | State switch delay parameter value illegal | |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | The shared line does not support the configuration state switch delay command. | |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | Status switch delay command is not supported | |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | VSwitch with a secondary zone does not support IPv6 operations. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | The CidrBlock and Ipv6Only parameters are mutually exclusive. You cannot specify an IPv4 CIDR block when creating an IPv6-only vSwitch. | |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | No available CIDR block can be allocated from the VPC for the requested mask. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | The operation is not allowed because the specified IPv6 CIDR mask is invalid, only %s is supported. | |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. You must specify only one of them. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | Either Ipv6CidrBlock or Ipv6CidrMask must be specified when IPv6 is enabled. | |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | Either CidrBlock or CidrMask must be specified for creating a non-IPv6-only VSwitch. | |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask are mutually exclusive. You must specify only one of them. | |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | The specified IPv6 ISP does not match the IPv6 ISP configured in the IPAM pool. | |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | Failed to create a physical connection. No eligible access device has been excluded from the redundant connection. | |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | Failed to create a physical connection. There is no access device matching the input optical module. | |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | Failed to create a physical connection because there is no access device that meets the advanced capabilities of the device. | |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | The CidrBlock and SecondaryCidrBlock parameters are mutually exclusive and cannot be specified at the same time. | |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | The target CIDR block does not cover the existing vSwitch CIDR block %s after the CIDR block is shrunk. | |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | The target CIDR block overlaps with the existing CIDR block %s in the VPC. | |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | The target CIDR block does not overlap with the original CIDR block. The CIDR block resize requires an overlap between them. | |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | The target CIDR block is the same as the original CIDR block. Please specify a different CIDR block. | |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | The specified secondary CIDR block does not exist in the current VPC. | |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | The NewSecondaryCidrBlock parameter is required when modifying a secondary CIDR block. | |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | At least one of the CidrBlock and SecondaryCidrBlock parameters must be specified. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | When creating a VPN gateway in this region, you are not allowed to specify a second vSwitch ID. | |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | The parameter DisasterRecoveryVSwitchId is missing. | |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber is only supported with Prefix reserved type. | |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | The number of deep pagination skip operations has triggered rate limiting. Reduce the frequency of deep page jumps, or use sequential paging. | |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | When BGP is enabled for IPSec connection, ASN needs to be configured on the customer gateway. | |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | The specified PBR route does not exist. | |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | The parameter OwnerId is invalid. Check whether the parameter is correct and try again. | |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | The parameter EcrInstanceId is missing. | |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | IP does not exist | |
| 400 | OperationFailed.Ipv6OnlyVSwitch | The operation is failed because the specified VSwitch is Ipv6 only. | The operation is failed because the specified VSwitch is Ipv6 only. | |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | The selected NAT gateway resource is not discovered when creating or modifying the routing target group. | |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | The current operation does not support routing target groups with members of the NAT gateway type. | |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | VSwitch information associated with the selected NAT gateway was not found. | |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | The region does not support the NAT Gateway as a member of the route target group. | |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | The NAT gateway in the route target group must enable the ICMP return function to ensure that ICMP detection packets can be responded to normally. | |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | A route target group only supports NAT gateways of a single AZ type. | |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | The next hop of an ipv6 route entry does not have any ipv6 address | |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | The current NAT gateway has a routing target group reference. Delete the reference first. | |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | The NAT gateway is referenced by the route destination group. You are not allowed to disable the ICMP Pickup function. | |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | The error message returned because VPN connections to the specified vpn gateway are not deleted. | |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | Invalid router type. | |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | The router interface status is abnormal. | |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | The router ID associated with the router interface cannot be empty. Check and try again. | |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | The advanced port capability is temporarily not supported. Please confirm and try again. | |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | The operation is not allowed because the VPC is attached to ECR %s. | |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | current user is not allowed to create a single az nat | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | Specifying CidrBlock or CidrMask is not allowed in IPv6-only mode. | |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | The operating resource is locked by the system and cannot be operated temporarily. | |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | The policy format is invalid. | |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | Querying the current month traffic data in the 95 billing mode is not supported. | |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | This operation does not support the region parameter | |
| 400 | NatInstance.NotFound | Instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | The operation fails because the IP address in the Snat rule IP address pool is not added to the shared bandwidth packet. | |
| 400 | Instance.NotFound | instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationUnsupported.User | The current user does not support this operation. | The current user does not support this operation. | |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | Enhanced NAT gateways that use the CU billing method are not supported in the current region. | |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | Order error. The payment type parameter is not available. | |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | Order error, basic parameter information incomplete. | |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | The current instance does not support the configuration of the FullNat rule domain name. | |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | The current zone does not support the configuration of the FullNat rule domain name. | |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | The routing table status does not support this operation. Please try again later. | |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | Failed to create the NAT gateway. | |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | Enhanced NAT gateways are not supported in the current region. | |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | The operation failed because the IP in the SNAT rule IP address pool was added to multiple NAT bandwidth packets. | |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | The operation failed because the EIP is not bound to this NAT gateway. | |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | The current state of the NAT IP address is invalid. | |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | The specified SNAT entries are not in a stable state and cannot be operated. | |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | The operation failed because the SNAT rule IP address pool was added to multiple bandwidth packages. | |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | The operation is not supported because the validation of the relationship between the EIP and the NAT gateway failed. | |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | Incorrect state for source of traffic mirroring session | |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | The status of the intent of the traffic mirroring session is incorrect. | |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | The VPC deletion failed because it contains undeleted custom routes. | |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | The current operation is rejected because there is still a MACSec key binding on the physical connection. | |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | The current physical connection supports MACSec, but does not support the selected encryption algorithm. | |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | The Ckn to be disassociated does not exist. | |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | A physical connection supports binding up to three sets of MACSec keys. | |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | The operation is not allowed because the MACSec key is in an unstable state. | |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | The current physical connection supports MACSec, but the selected encryption algorithm is not supported. | |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | The current physical connection does not support the MACSec feature. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | The status of the Express Connect circuit is abnormal. | |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | Ikev1 does not support IkeEncAlg of gcm16. | |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | The customer gateway and the VPN gateway associated with the IPsec-VPN connection must not have the same gateway IP address. | |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | TunnelBandwidth is illegal. | |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | Large tunnelBandwidth VpnAttachment is unsupported. | |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | Current version of the VPN does not support pbr route entry. | |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | The resource cannot be deleted because it has dependent IPsec servers. | |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | The AccessDomain parameter in the request parameter is invalid. | |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | The specified input AccessIp conflicts with the AccessDomain. | |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | The entered VBR VLAN is 0. Fault drill is not supported. Please use the physical connection for fault drill. | |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | the specified eip allocation token has expired | |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | Dual-stack flow log instances do not support custom trafficPath. | |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | The quota of %s is exceeded, usage %s/%s. | |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | The network ACL is being bound to or unbound from the switch. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | The operation is not allowed because of all members being in the same availability zone. | |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | The operation is not allowed because of the inability to update memberType. | |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | Parameters | |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | NatIp and Ipv4Prefix quota use overflow. | |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | The gateway does not support Ipv4Prefix. | |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | Ipv4Prefix quota usage overflow. | |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | the ip version of the prefix list you passed in is inconsistent with the actual ip version of the prefix list. | |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | If the prefix list increases the maximum number of entries, the quota for the maximum number of entries for the associated network ACL instance is exceeded. | |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | The operation is not allowed because the current physical port does not support advanced capabilities such as MPBGP and MPBGP-v6. | |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | When a virtual border router exists under a physical port, it cannot be deleted. | |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | The specified route entry does not exist. | |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | Bond eni is not allowed to be the source of traffic mirror. | |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | The resources associated with the VPC are not stable, such as CEN. Try again later. | |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | The VPC to which the route target group belongs is different from the VPC to which the route target configuration instance belongs. | |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | The current state of the RouteTargetGroup prohibits the operation. | |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | The operation is not allowed because of can not update instance type. | |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | The instance types configured for the route target group must be the same. | |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | The operation is not allowed because of all config in the same availableZone. | |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | This Ipv4Prefix has already been created. Do not re-create it. | |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | Resource Ipv4Prefix not found, please check that the Ipv4Prefix exists. | |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The Internet Shared Bandwidth plan contains undeleted SNAT or DNAT entries. Delete the SNAT or DNAT entries before you perform this operation. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | The parameter Ipv4Prefix is invalid and must be/28 network segment. | |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp belongs to Ipv4Prefix and cannot be deleted separately. Please delete the Ipv4Prefix directly. | |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid and must be in the/28 network segment. | |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | Missing parameter DetectMultiplier. When configuring BFD packets, you need to configure three parameters: the sending interval, the receiving interval, and the detection time multiple. | |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | Missing parameter MinTxInterval. When configuring BFD packets, you need to configure three parameters: the sending interval, the receiving interval, and the detection time multiple. | |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | Missing parameter MinRxInterval. When configuring BFD packets, you need to configure three parameters: the sending interval, the receiving interval, and the detection time multiple. | |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | The specified resource% s does not exist. | |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | The feature of RouteTargetGroup is not supported. | |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | Missing parameter DhcpOptionsSetId | |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | NatIp resources have been allocated. | |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | Ipv4Prefix have been allocated. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | The parameter Ipv4Prefix is illegal. | |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | The parameter NatIp is illegal. | |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | The reserved network segments of the Ipv4Prefix and VSwitch do not match. | |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | The traffic mirroring service has been activated. Do not repeat the operation. | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | the ipv6 ip address associated with the cloud service instance cannot be used for internet bandwidth. | |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Insufficient Ipv4Prefix resources. | |
| 400 | OperationDenied.InvalidIpReservedByVSwitch | The specified ip address is the reserved address of the switch. | the specified ip address is the reserved address of the switch | |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The resource Ipv4Prefix does not exist. | |
| 400 | UnsupportedFeature.JumboFrame | The jumbo frame feature is not supported in the current region. | The jumbo frame feature is not supported in the current region. | |
| 400 | ResourceInConfiguring.NodeId | The express connect router subinstance is not in a steady state and cannot operate. | The Express Connect Router (ECR) sub-instance is not in a stable state and cannot be operated. | |
| 400 | IncorrectStatus.Ecr | The express connect router is not in a steady state and cannot operate. | The Express Connect Router (ECR) is not in a stable state and cannot be operated. | |
| 400 | Forbidden.VpconnCrossBid | Not allow to create across bid virtual physical connection. | Pushing shared ports across sites is not allowed. | |
| 400 | OperationDenied.NotInWhiteList | User does not have permission to turn on jumbo frames. | You do not have permission to enable jumbo frames. | |
| 400 | Mismatch.Ipv4PrefixAndNatIpCidr | The %s and %s are mismatched. | The Ipv4Prefix and NatIpCidr are mismatched. | |
| 400 | MissingParam.BandwidthPackageId | The parameter bandwidthPackageId is mandatory. | The bandwidthPackageId parameter is required. | |
| 400 | DuplicatedParam.ResourceIds | The parameter of ResourceIds contains duplicate values. | The ResourceIds parameter contains duplicate values. | |
| 400 | OperationFailed.ModifyEcmpRoute | Operation is failed because ecmp route can not modify. | The operation failed because ECMP routes do not support modifying attributes such as the next hop. | |
| 404 | InvalidEipId.NotFound | The specified EIP instance does not exist. | The specified EIP instance does not exist. | |
| 400 | OperationFailed.ConflictWithSecondaryCidr | The modified cidr is conflict with the secondary cidr. | The operation failed because the modified CIDR block conflicts with the secondary CIDR block. | |
| 400 | QuotaExceeded.SessionNumPerTarget | The quota of the number of traffic mirror sessions per target is exceeded. | The quota for the number of sessions allowed per traffic mirror destination has been exceeded. | |
| 400 | IllegalParam.Protocol | The specified Protocol %s is invalid. | The protocol parameter is invalid. | |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock %s is illegal. | The SourceCidrBlock parameter is invalid. | |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock %s is illegal. | The DestinationCidrBlock parameter is invalid. | |
| 400 | MissingParam.RouteTableId | The parameter RouteTableId is missing. | The required parameter RouteTableId is missing. | |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | The PublicIpAddressPoolId parameter is missing. | |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | The specified subnet mask is invalid. | |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | Allocating unassigned private IPv6 addresses is not currently supported. | |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | The current operation does not support private GUA addresses. | |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | The specified Ipv6Isp parameter is invalid. | |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | The input mask or the mask of the CIDR block is not within the allowed range. | |
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | The ENI type cannot be a slave ENI. | |
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | The number of IPv6 CIDR blocks in the VPC has exceeded the limit. | |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | The input IPv6 CIDR block overlaps with an existing CIDR block. | |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | The input IpVersion is inconsistent with the IpVersion of the input address pool. | |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | The IpVersion parameter is missing. | |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | The quota for the number of Ipv6EgressRules has been exceeded. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | The specified IPv6 instance has enabled IPv6 bandwidth. Release the IPv6 bandwidth and try again. | |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | DHCP options set-related features are not available in the current region. | |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | The instance type you specified requires an upgrade to Cloud Data Transfer (CDT) billing. Upgrade CDT and try again. | |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | A flow log instance that captures traffic for all scenarios has already been created for the specified resource. You cannot create a flow log instance that captures traffic for only specific scenarios. | |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | The operation failed due to the %s quota limit. The mask of the reserved CIDR block exceeds the default mask of the current IP prefix: %s/%s. | |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | The ProjectName and LogStoreName parameters are invalid. They must be both specified or both omitted. | |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | The operation is not supported because the specified next hop instance of the route is associated with multiple IPv6 addresses. | |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | The AssociatedInstanceId parameter is missing. | |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | The operation failed because the instance is associated with a CEN instance. | |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | The operation failed because an IPv6 public IP address exists in the VPC. | |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | The Virtual Border Router has been locked. Try again later. | |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | The current resource failed to be associated with a VPC or CEN instance of another account. Verify that you have the required permissions and try again. | |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | The primary tunnel and the secondary tunnel must be created at the same time. | |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | A VPC supports only one dynamic route learning source. Remove the VPC from the ECR. | |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | The architecture does not support BGP capabilities (single-tunnel bonding VPN gateway). | |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | Route propagation is not enabled for the system route table of the VPC. | |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | Automatic route propagation cannot be shutdown because residual BGP routes exist. | |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | The DestinationCidrBlock parameter is invalid. | |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | The SourceCidrBlock parameter is invalid. | |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | A VPC supports only one dynamic route learning source. Disable route synchronization for this VPC in the transit router. | |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | The vpc_trafficmirror_public product does not have the group cloud migration tag and cannot be purchased by internal users. | |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | Public Internet bandwidth is enabled for the address [%s] under the IPv6 gateway [%s], and the address belongs to the shared user [%s]. Delete the address and try again. | |
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | Traffic mirroring does not support full packet mirroring. TrafficMirrorSourceTruncateMode can only be set to 0 (default mode). | |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | The destination type of the current traffic mirror session does not support the full packet mirroring feature. | |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | The route table propagation has not reached a steady state. Wait a moment and try again. | |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | The RouteEntries parameter is missing. | |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | The GatewayRouteTableId and Ipv4GatewayRouteTableId parameters cannot both be empty. We recommend that you use GatewayRouteTableId. | |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | The vSwitch to which the local route you are modifying belongs is associated with the current route table. Modifying its next hop is not allowed. | |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | Modifying local routes in the system route table is not allowed. | |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | The current vSwitch is not found. | |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | A required parameter is missing. | |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | The operation failed because the IPv6 CIDR block is already in use. | |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | The DNS domain name resource is not in a steady state. Try again later. | |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | The request is missing required parameters. You must provide RouteEntryId, or both RouteTableId and DestinationCidrBlock. | |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | The VPC cannot be deleted because the security group [%s] delete a VPC has not been deleted. Delete the security groups delete a VPC before you delete the VPC. | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] depends on [%s]. Delete the dependent resource before you proceed. | |
| 400 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | The specified region ID does not exist. | |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | The specified IPv6 egress-only rule is not in a steady state. | |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | The BindInstanceId parameter is missing. | |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | The traffic mirror source does not support the specified managed network interface controller (NIC) type. | |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | The traffic mirror destination does not support the specified managed network interface controller (NIC) type. | |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | The VPC private domain name feature is not available in the current region. | |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | The operation failed because the specified network interface controller (NIC) and route table do not belong to the same VPC. | |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | Neither TrafficAnalyzerId nor the ProjectName and LogStoreName parameters are specified. | |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | The VSwitchId parameter is missing. | |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | The operation failed because an Anycast elastic IP address (EIP) exists in the specified VPC. | |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | IPv6 is not enabled for the transit router (TR) attachment. | |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | The number of EIPs in multi-EIP mode that can be associated exceeds the limit. | |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | The configured NAT IP address already exists. | |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | The specified user ID of the resource owner is invalid. | |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | The length of the AssociatedInstanceId parameter is invalid. | |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | The sampling interval of the flow log is greater than that of the NIS Traffic Analyzer. | |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | The specified NIS Traffic Analyzer does not exist. | |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | An invalid delivery type was specified when modifying the delivery destination of a flow log instance or enabling or disabling NIS network traffic analysis. | |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | The specified NIS Traffic Analyzer is not enabled. | |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | You have not completed real-name verification and do not meet the purchase requirements. Log on to the User Center to complete real-name verification. | |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | The AssociatedInstanceId parameter is invalid. | |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | The default DHCP options set cannot be modified. | |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | The Type parameter is invalid. | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | This EIP cannot be used in an SNAT entry because it is already used in a DNAT entry for any port mapping. | |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | The operation is not supported due to a NAT instance architecture mismatch. | |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | The quota for ECS elastic network interface controllers (NICs) is insufficient. | |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | The system will deny the operation because only system route tables support publishing routing entries. | |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | The operation is denied because the CIDR block is unavailable in the IPAM pool. | |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | The specified contiguous EIP group instance does not exist. | |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | The vSwitch is being created. | |
| 400 | MissingParam.Resource | Missing parameter Resource. | The Resource parameter is missing. | |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | The specified virtual border router (VBR) is not associated with the BondRI. Verify the association and try again. | |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | An unknown error occurred. Try again later. If the error persists, submit a ticket. | |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | The InstanceId parameter cannot be empty. | |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | The tag key or value is invalid. Specify a valid tag key and value and try again. | |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | The BondRI is in a transitional state. Verify the instance status and try again. | |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | The operation is not allowed because the next hop type of the route is changed from Local. | |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | The operation failed because the current region does not support modifying the next hop of an IPv6 route. | |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | The VPN connection instance is authorized to a Cloud Enterprise Network (CEN) instance in another account. Revoke the cross-account authorization before you delete the instance. | |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | The two zones specified for creating a dual-tunnel VPN connection must be different. | |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | Zones for dual-tunnel disaster recovery are not supported. | |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | The first zone specified in the input parameters is unavailable. | |
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | The zone specified for the region is unavailable. | |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | The NAT gateway instance does not exist. | |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | The operation failed because bandwidth throttling is not allowed. | |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | The backend service failed to query the ENI information. | |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | The specified access point does not exist or you do not have permission to view it. | |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] depends on a reserved IPv6 CIDR block. Delete the dependent resources before you perform this operation. | |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | The operation is not supported because of the current private domain name status of the VPC. | |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | You have not completed real-name verification and do not meet the purchase requirements. Log on to the User Center to complete real-name verification. | |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | NAT gateways are not available in the current zone, or underlying resources are insufficient. | |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | The NatIpCidr CIDR block already exists or overlaps with an existing CIDR block. | |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | The NatIpCidr parameter is invalid. | |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | The specified AccessMode.ModeValue and AccessMode.TunnelType parameters conflict with each other. | |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | The specified PrivateLinkEnabled and AccessMode parameters conflict with each other. | |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | The specified PrivateLinkMode and AccessMode parameters conflict with each other. | |
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | The operation is not supported for the AccessMode.ModeValue property of the VPC NAT gateway. | |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | The AccessMode.TunnelType request parameter is invalid. | |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | The AccessMode.ModeValue request parameter is invalid. | |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | The VPC NAT gateway failed to generate a tunnel ID. Try again later. | |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | The public IP address and the private IP address in a DNAT entry cannot be the same. | |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The specified resource has dependencies. Dissociate the dependencies first. | |
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | The specified OwnerAccount parameter is invalid. | |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | The TargetType parameter is invalid. | |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | Creating active/standby routes or load balancing routes is not supported for published route entries. | |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bond network interface controllers (NICs) are not supported as traffic mirror destinations. | |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | Gateway Load Balancer endpoints (GWLBe) are not supported as traffic mirror destinations. | |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | Your account balance is insufficient. | |
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | The parameters of the sales module fail the constraint check. | |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | The specified resource instance does not exist. | |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | Your account balance is insufficient. | |
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | Your account balance is insufficient. | |
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | The specified commodity pricing plan is not found. | |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | This VPC does not support certain advanced features. Submit a ticket for assistance. | |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | The specified IPAM pool does not support IPv6. | |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | When you modify the next hop of a local route in a custom route table, the destination CIDR block of the local route is identical to the CIDR block of a vSwitch associated with the route table. | |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | The VPC contains route tables of an earlier version. Submit a ticket for assistance. | |
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | The IP version of the EIP instance does not match the IP version of the Internet Shared Bandwidth instance. | |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | An unsupported next hop type was specified when modifying the next hop of a local route. | |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | The next hop of a local route has been modified. | |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | The specified Gateway Load Balancer endpoint instance is not found. | |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | This operation is not supported because a VPC can have only one IPv6 gateway. | |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | Only unique local address (ULA) IPv6 addresses are supported. | |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | This route type is not supported. | |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | ULA addresses are not supported for the current operation. | |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | VBRs do not support IPv6 routes. | |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | IPv6 features are not supported for the current operation. | |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | IPv6 does not support ECMP routes. | |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | The specified IPv6 CIDR block is not supported. | |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | Egress-only rules at the vSwitch level are not yet supported in the specified region. | |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | The Free Edition IPv6 gateway does not support creating egress-only rules. Upgrade the IPv6 gateway to the Enterprise Edition or Enterprise Enhanced Edition. | |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | This operation is not supported because the IPv6 feature is not enabled. | |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | This operation is not supported because the zone IDs do not match. | |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | The operation failed because the IPv6 CIDR block is already in use. | |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | This operation is not supported because IPv6 is not enabled for the VPC. | |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | The operation failed because the quota for standby route entries has been exceeded. | |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | The operation failed because the type of this active route is not supported. | |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | The operation failed because the quota for active route entries has been exceeded. | |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | The operation is not supported because the IPv6 instance does not have Internet bandwidth. | |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | The operation failed because the bandwidth of the IPv6 instance exceeds the maximum bandwidth limit of the target gateway specification. | |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | The operation failed because IPv6 is already enabled. | |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | The operation failed because the next hop type is invalid. | |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | The operation failed due to an overdue payment. | |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | The operation failed because only custom routing entries support filtering by routing entry ID or routing entry name. | |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | The operation failed because the peer type of the router interface is invalid for ECMP. | |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | The operation failed because the default VPC does not exist. | |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | The operation failed because the new CIDR block causes a routing conflict. | |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | This region does not currently support binding IP addresses to L2 EIPs. | |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | When adding a secondary CIDR block to a VPC without using an IPAM pool, you must specify either the SecondaryCidrBlock or Ipv6CidrBlock parameter, but not both. | |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | The EnableIpv6 parameter is missing. | |
| 400 | MissingParam.context | The param of context is missing. | The context parameter is missing. | |
| 400 | MissingParam.bid | The param of bid is missing. | The bid parameter is missing. | |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | The aliUid parameter is missing. | |
| 400 | MissingParam | Miss mandatory parameter. | A required parameter is missing. | |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | The specified VPC-connected instance is not found. | |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | The specified VPC-connected instance is not found. | |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | This operation is not supported in the current state of the ENI. | |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | The specified secondary CIDR block is not found. | |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | The specified route table is not found. | |
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | The specified EniInstanceId is invalid. | |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | The format of the specified IPv6ULACidrBlock is invalid. | |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | The specified IPv6 instance is not found. | |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | The specified IPv6GatewayId is not found. | |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | The specified IPv6 gateway is not found. | |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | The specified IPv6CidrBlock is not found. | |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | The specified VPC is not in a stable state. | |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | The route table [%s] is in the [%s] state, which is not a stable state. Try again later. | |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | The specified NAT gateway is not in a stable state. | |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | Creating an IPv6 egress-only rule is not supported in the current state of the IPv6 Internet bandwidth. | |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | The specified egress-only rule cannot be deleted in its current state. | |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | The ZoneId parameter is invalid. | |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | The VpcIPv6CidrBlock parameter is invalid. | |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | The UserCidr parameter is invalid. | |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | The Spec parameter is invalid. | |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | The ServiceProvider parameter is invalid. | |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | The SecondaryCidrBlock parameter is invalid. | |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | The RouteEntryType parameter is invalid. | |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | The NextTokenExpired parameter is invalid. | |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | The Mode parameter is invalid. | |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | The IpVersion parameter is invalid. | |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | The IPv6CidrType parameter is invalid. | |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | The Ipv6CidrBlock parameter is invalid. | |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | The InstanceType parameter is invalid. | |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | The EnableIpv6 parameter is invalid. | |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | The Description parameter is invalid. | |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | The VPC cannot be deleted because it contains EPS resources. | |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | The VPC cannot be deleted because it contains an IPv6 gateway. | |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | The specified ClientToken is a duplicate. | |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | The specified SecondaryCidrBlock is a duplicate. | |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | The ChargeType parameter is invalid. | |
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | Disabling route propagation for this route table is not allowed. | |
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | The quota for Express Connect circuits that you can create has been exceeded. Contact the administrator to increase the quota and try again. | |
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | The quota for Express Connect circuits that can be purchased per access point has been exceeded. Contact the administrator to increase the quota. | |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | Failed to retrieve the status information of the Express Connect resource. Verify the resource information and try again. | |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | The IpVersion parameter is invalid. Verify the parameter and try again. | |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | When adding a BGP group, the peer autonomous system (AS) number cannot be the same as the local AS number. Verify the parameters and try again. | |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | The operation is not allowed because routes in custom route tables cannot be published. | |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | The route publish status of the routing entry is incorrect. | |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | The route has already been published to other components, and the specified next hop type does not support route publication. | |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | The target instance for route publication is not associated with a VPC. | |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | The operation is denied because the type of the route publication target is not currently supported. | |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | The specified route table is in an invalid state. | |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | Publishing system routes is not supported. | |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | The next hop type of the route does not support publication. | |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | The publish route entry operation for route prefix list routing is not supported. | |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | When creating an SNAT rule for a NAT gateway instance, you cannot specify both the SnatIp and NetworkInterfaceId parameters. | |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | When creating an SNAT rule for a NAT gateway that has PrivateLink enabled, you must specify the NetworkInterfaceId parameter. | |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | When creating an SNAT rule for an Internet NAT gateway or a VPC NAT gateway, you must specify the SnatIp parameter. | |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | Creating unassigned IPv6 addresses is not supported in this region. | |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | Creating unassigned IPv6 prefix CIDR blocks is not supported in this region. | |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | You cannot disable IPv6 for the VPC because it contains IPv6 routes. | |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | Allocating unassigned IPv6 addresses is not supported in the current region. | |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | The operation failed because some IPv6 addresses in the IPv6 prefix are already in use. | |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | The specified Ipv6Prefix parameter is invalid. | |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | The specified AddressType parameter is invalid. | |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | The router interface does not support IPv6. | |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | The AS numbers of the BGP groups for the VBRs in a failover group must be identical. | |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | The specified resources are insufficient. | |
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | The specified ENI or VM to be bound does not exist. | |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | Multiple invalid parameters are provided. | |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | The inventory of consecutive EIPs is insufficient. | |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId and BandwidthPackageId are mutually exclusive. | |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId and RouteTableIdOrDestCidrBlock are mutually exclusive. | |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | The ProductType parameter is invalid. | |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | Insufficient resources: no matching CIDR block was found. | |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | Failed to apply for consecutive EIPs because the service has been discontinued. Use the IP address pool service instead. | |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | The VBR failover group instance ID or VBR instance ID is missing. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | The Ipv6AddressId and Ipv6InternetBandwidthId parameters cannot be empty at the same time. | |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | The specified resource does not exist. | |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | A fault drill task is in progress. Try again later. | |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | Fault drills are not supported for VBRs in a single-VBR and multi-physical-connection scenario. | |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId and VpnConnectionId are mutually exclusive. | |
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | The O&M event does not exist. | |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | The specified execution time of the O&M event must be before the latest execution time. | |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | The VPN gateway IP address does not exist. | |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | The specified PrivateIpAddress is invalid. Check the parameter constraints, modify the parameter, and try again. | |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | The VBR instance is not authorized by the VPC instance. Grant the authorization and try again. | |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | Multiple physical connections are bound to the VBR. | |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | The Express Connect circuit does not exist. | |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | The Virtual Border Router does not exist. | |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | The operation cannot be executed because the border vRouter is in the process of loading or unloading the Express Connect Router (ECR). Wait a moment and try again. | |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | The existing BGP neighbor of the VBR conflicts with the ECR configuration. Delete the BGP configuration and try again. | |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | The CIDR block does not exist. | |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | The operation is locked by another request. | |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | The specified next hop does not exist in the VBR route table. | |
| 400 | Idempotence.Processing | Idempotence request is processing. | The request is being processed as an idempotent request. | |
| 400 | InvokeError | instance quota rule invoke error. | Failed to retrieve the rule data. Try again later. | |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | The IPv6 CIDR block parameter is invalid. | |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | The UserCidr is invalid. | |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | The EnableIpv6 parameter is missing. | |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | The IPv6 CIDR block is invalid. | |
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | The specified VPC instance does not exist. | |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | A required parameter is missing. | |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | The specified route name is invalid. | |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | The specified route does not exist. | |
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | The route has multiple next hops. | |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | The specified access point information does not exist. Verify the information and try again. | |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | The current resource does not support this operation. Contact technical support for assistance. | |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | The current resource is not associated with an Express Connect Router (ECR), so this operation cannot be performed. Check the configuration and try again. | |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | The specified BondRI instance does not exist. | |
| 500 | InternalError | Internal system error. | An internal system error occurred. | |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | The Virtual Border Router (VBR) is already associated with an Express Connect Router (ECR). Disassociate the VBR from the ECR and try again. | |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | The vSwitch to which the elastic network interface controller (NIC) belongs does not exist. | |
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | Failed to activate the IP address pool service. Apply for the required permissions in Quota Center. | |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | The specified Zone parameter conflicts with the IpAddress or InstanceId parameter. | |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | Failed to allocate the frontend port. | |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | NAT gateways of the specified instance type do not support enabling session logs. | |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | You cannot create an IP address pool instance in the current service state. | |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | You do not have the permissions to use the requested IP address pool service. Make sure that you have subscribed to the service. | |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | The IP Address Manager (IPAM) feature is not supported in this region. | |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | Failed to configure session logs due to an internal service error. | |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | You cannot disassociate the Express Connect Router (ECR) because the VPC still has static routes pointing to the ECR. | |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | The specified instance ID does not exist. | |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | The input for the session log delivery destination type parameter SessionLogDeliveryType does not meet the requirements. | |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | The operation failed because you have not granted authorization for NAT session log delivery. | |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | The configuration format of the session log delivery destination parameter (SessionLogDeliveryDestination) is invalid. | |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | Failed to configure the NAT session log delivery rule. | |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | The operation on the shared resource failed. | |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | Specify the IDaaSRegionId parameter when you enable two-factor authentication. | |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | The operation is not allowed because available CIDR is insufficient. | |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | The operation is denied because the specified CIDR block falls within an invalid CIDR range. | |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | The dependent IPAM pool does not exist. | |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | The operation is denied because the request is not made in the region where the IP address pool resides. | |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | The operation is denied because you cannot create a VPC or add a secondary CIDR block to a VPC from an IP address pool that does not have region attributes. | |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | Specify the Cidr or CidrMask parameter when you create a resource from an IPAM pool. | |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | The access point type does not support the creation of zone-redundant Express Connect circuits. | |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | The IPAM pool cannot be empty. | |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | The specified Ipv4CidrMask parameter is invalid. | |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | The SecondaryCidrMask parameter is required. | |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | The specified SecondaryCidrMask parameter is invalid. | |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | The Alibaba Cloud-side BGP AS number of the BGP group must be the same as the AS number of the Express Connect Router (ECR). | |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | The router interface does not support IPv6. | |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | The VPC is not in a stable state. | |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | The specified prefix CIDR block must be within the reserved CIDR block for a vSwitch. | |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | The specified IPv6 prefix mask exceeds the quota. | |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | The operation failed because the resource is currently bound. | |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | The current VPN gateway version does not support IDaaS 2.0. | |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | The specified IDaaS application instance ID is invalid. The application instance must be created based on the dedicated SSL VPN template. | |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | The specified IDaaS application instance ID does not exist. | |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | Specify the IDaaSApplicationId parameter when you enable two-factor authentication. | |
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | The outbound traffic service is already enabled. Go to the console to use it. | |
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | The outbound traffic service is already enabled. Go to the console to use it. | |
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | The VBR and ECR are associated. Disassociate them first. | |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | The router interface does not support IPv6. | |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | The NextHopType parameter is invalid. | |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | The current NAT gateway does not support modifying the PrivateLinkMode parameter. | |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | Creating a NAT gateway in Geneve mode is not supported. | |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | Alibaba Cloud is optimizing the current region and cloud services in this region will be discontinued. To ensure business continuity and a smooth data migration, you cannot place new purchase orders at this time. Thank you for your understanding and support. | |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | Subscription instances are no longer available for purchase. | |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | Invalid parameter: Destination CIDR. | |
| 400 | IllegalParam.Policy | Param Policy illegal. | Invalid parameter: Policy. | |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | Invalid parameter: Protocol. | |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | Invalid parameter: IpVersion. | |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | Invalid parameter: Source CIDR. | |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | The VBR failover group instance parameter is invalid. | |
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | The router interface is referenced by a route entry. | |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | You cannot create an egress-only rule on an IPv6 instance that is not associated with any resource. | |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | The dependent resource vSwitchCidrReservation does not exist. | |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | The Ipv6Prefix feature is not supported in this region. | |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | The router interface status is abnormal. | |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | The service type of the ENI used as the next hop of the route is invalid. | |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | The specified instance does not exist in the current region. | |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | The specified Day parameter is invalid. | |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | The operation failed because the resource UID does not exist. | |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | Insufficient resources in the Internet Shared Bandwidth instance. | |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | The operation is denied because a version 1.0 route table exists. | |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | The ServiceLocation parameter is invalid. | |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | The EnableIpv6 and CidrBlock parameters are mutually exclusive. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | You cannot create a shared Express Connect circuit for a dedicated Express Connect circuit that is associated with a QoS policy. Contact your account manager. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | You cannot create a cross-account Virtual Border Router for a shared Express Connect circuit that is associated with a QoS policy. Contact your account manager. | |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | A single QoS rule cannot contain both IPv4 and IPv6 address configurations. Additionally, you cannot change the network type from IPv4 to IPv6 or vice versa. Check and modify the configurations. | |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | The number of QoS rules in the QoS queue exceeds the upper limit. To increase the quota, contact your account manager. | |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | The total bandwidth percentage of normal-priority queues in the QoS policy exceeds the specified limit. | |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | The number of high-priority queues in the QoS policy exceeds the limit. To increase the quota, contact your account manager. | |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | The number of normal-priority queues in the QoS policy exceeds the limit. To increase the quota, contact your account manager. | |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | The current QoS policy is associated with an Express Connect circuit and cannot be deleted. Dissociate the QoS policy first and retry. | |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | The device where the Express Connect circuit is deployed does not support the QoS feature. | |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | For a single VBR with multiple physical connections, all physical connections must be bound to a QoS policy. | |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | QoS policies cannot be bound to dedicated Express Connect circuits that involve cross-account Virtual Border Routers. | |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | QoS policies cannot be bound to dedicated Express Connect circuits that involve shared physical connections. | |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | This operation cannot be performed because the Express Connect circuit has an overdue payment. | |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | The current QoS configuration conflicts with other configurations. Try again later. | |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | The Express Connect circuit is already bound to another QoS policy. | |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | This operation cannot be performed because the Express Connect circuit is in an abnormal state. | |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | This operation cannot be performed because the QoS policy is in an abnormal state. Try again later. | |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | The current user is not authorized to create QoS policies. Contact your account manager. | |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | The number of QoS policies for the current user has exceeded the limit. Contact your account manager for assistance. | |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | When you create a dual-tunnel VPN, the two specified vSwitches must belong to different zones. | |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | The zone of the specified vSwitch does not support dual-tunnel VPNs. Select a different vSwitch. | |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | You cannot delete a VPC because transit router connections still exist. | |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | This operation is not supported in the current state of the reserved CIDR block. Try again later. | |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | This operation is not allowed because your account has a pending specification change order. | |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | This operation is not allowed because the specified resource is depended on by other resources. | |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | The specified EIP is already added to the Internet Shared Bandwidth instance. | |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | The vSwitch is in an abnormal state. | |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | The route entry is in an invalid state. | |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | No corresponding cluster IP address was found for the specified zone ID. | |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | If the traffic mirror source contains a NAT gateway ENI, the traffic mirror destination must be an SLB instance. | |
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | The vRouter is already associated with an Express Connect Router. Modifying the local AS number is not allowed. To modify it, disassociate the Express Connect Router first. | |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | The local AS number of the Virtual Border Router must be the same as the AS number of the Express Connect Router. | |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | The operation failed because one or more binding operations failed. | |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | The security protection type of the EIP does not match the security protection type of the address pool. | |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | The specified SecurityProtectionTypes parameter is invalid. | |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | The current ISP does not support the creation of enhanced security protection address pools. | |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | The specified IPv6 address is already allocated. | |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | The specified DetectMultiplier parameter is out of the valid range. | |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | The specified address is already allocated. | |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | The specified AssociatedPhysicalConnections parameter is invalid. | |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | The specified IpAddress parameter is invalid. | |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | The specified MinTxInterval parameter is out of the valid range. | |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | The specified MinRxInterval parameter is out of the valid range. | |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | The specified NAT gateway does not exist. | |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | The uid, bid, regionNo, remoteRegionNo, and routerId parameters cannot be empty. | |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | This operation cannot be performed because the router interface has an overdue payment. | |
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | The router interface cannot be deleted because routes pointing to it still exist. | |
| 400 | AvailableZoneNotExist | Available zone not exist. | The specified zone does not exist. | |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | Duplicate parameter values exist. | |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | The description must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | The specified associated instance already has bandwidth. | |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | The parameter is duplicated. | |
| 400 | ForbiddenAction | The user does not support this action. | You do not have the required permissions. | |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | The bandwidth plan has insufficient bandwidth. | |
| 400 | RouteConflict | Route conflict exists in routing table. | A route conflict exists in the route table. | |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | The operation is not allowed because the VirtualPhysicalConnection does not have the required permissions or has an overdue payment. | |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | A route conflict exists in the route table. | |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | The traffic mirror destination does not support the type of the traffic mirror source. | |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | The specified value of the Description parameter is invalid. | |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | You do not have the permissions to create shared Express Connect circuits. Contact your account manager. | |
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | The operation is allowed only when the router interface is in the Active, Idle, or Inactive state. | |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | The specified bandwidth plan does not exist. | |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | The specified route table type is not supported. | |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | The specified route table type is not supported. | |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | The number of destination routes to be created exceeds the quota limit. | |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | Failed to modify the VPN connection parameters because multiple network segments are configured while the IKEv1 protocol is used. | |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | The VPN is being configured. Try again later. | |
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | The resource you are operating has reached the quota limit. Refer to the VPN documentation to increase the quota or use an alternative solution. | |
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | No connection logs are found for the VPN connection. | |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | The number of VPN customer gateways to be created exceeds the quota limit. | |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | The number of SSL certificates to be created exceeds the quota limit. | |
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | The number of policy routes exceeds the quota limit. | |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | The current VCO state does not support modification or deletion operations. | |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | Different IKE configurations are not supported for different VPN connections under the same VPN gateway when they use the same customer gateway. | |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | The next hop of the route is invalid. | |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | The parameter is invalid. The certificate for the corresponding SSL VPN server is not found. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | The zone of the secondary vSwitch is not supported. | |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | Required parameters are missing when creating a tunnel for a dual-tunnel VPN. | |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | The number of VPN connections exceeds the quota limit. | |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | The account balance is insufficient to purchase a VPN. | |
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | the resource cannot be deleted because the resource has an ipsec server dependency. | |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | You do not have the permissions to associate multiple direct EIPs. | |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | You cannot modify the cross-region connection of the Virtual Border Router. Apply for the required permissions. | |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | Creating NAT service plans is not supported. | |
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | Only Express Connect circuits in the Canceled, Rejected, Terminated, Allocated, or Allocation Failed state can be deleted. | |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | The specified ISP is not supported. | |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | The EIP instance is no longer in the bandwidth plan. | |
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | The specified NAT gateway is already associated with an EIP. Disassociate the EIP from the NAT gateway first. | |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | The specified value of the NatIpPort parameter is invalid. | |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | The format of the OutIp parameter is invalid. | |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | The NetworkInterfaceId parameter is invalid. | |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | A previous token request is still being processed. Try again later. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | The specified VSwitchCidrReservationMask must be at least 2 greater than the vSwitch mask. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | The specified VSwitchCidrReservationMask must be greater than the vSwitch mask plus 1. | |
| 400 | InnerError | Internal system error. | An internal system error occurred. | |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | A tag that prohibits order placement is present. Contact your distributor for assistance. | |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | Failed to query the order because an error occurred while calling the trade application. | |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | The IP address does not match the bandwidth plan and is not in the specified bandwidth plan. | |
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | The policy-based routing quota has been exceeded. | |
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | Failed to query the trusteeship relationship of the current user. | |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | The status of the EIP is invalid. | |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | The O&M contact information for the ISP line is invalid. | |
| 400 | InvalidParam | The routerEntry input param is illegal. | The input parameters for modifying the route are invalid. | |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | When Ipv6CidrBlock is specified, EnableIpv6 cannot be set to false. | |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | CloudBox public networks are not supported in this region. | |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | The status of the NAT gateway is invalid. | |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | The region of the resource does not match the region where the service is called. | |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | The next hop can be bound only to standard elastic network interfaces (ENIs). | |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | The filter parameter key is invalid. | |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | You cannot specify only ResourceId or ResourceName without specifying ResourceType in the filter parameters. | |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | A single key in the filter parameters cannot have more than 5 values. | |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | The filter parameters cannot contain more than 5 keys. | |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | The filter parameter value is invalid. | |
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | The specified RouterInterface instance does not exist. | |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | Only fault drill tasks in the running state can be terminated. | |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | Only fault drill tasks in the pending or completed state can be deleted. | |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | The specified fault drill task ID is invalid. | |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | Only fault drill tasks in the pending state can be modified or started. | |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | The specified shared Express Connect circuit is not associated with a virtual border router. | |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | Fault drills are not supported for shared Express Connect circuits of VLAN 0. | |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | Fault drills are not supported for Express Connect circuits that contain more than one shared Express Connect circuit. | |
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | Fault drills are not supported for Express Connect circuits that contain more than one cross-account VBR. | |
| 400 | AnotherJobTesting | There is another job which is testing. | A user can run only one fault drill task at a time in a region. | |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | The specified task type is invalid. | |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | The specified task duration is invalid. | |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | The specified resource has overdue payments. | |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | The specified resource ID parameter is invalid. | |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | The status of the resource corresponding to the specified resource ID is invalid. | |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | The current user already has a running fault drill task. Complete the task and try again. | |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | You can add a maximum of 16 resources to a fault drill task. | |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | The specified address is already allocated. | |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | The quota for gateway route tables per VPC has been reached. | |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | The requested resources are insufficient. To request more resources, submit a ticket. | |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | The specified IPv6 egress-only rule does not exist. | |
| 400 | EcFailToGetAp | Fail to get access point details. | The specified access point information cannot be found. | |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | High-availability Express Connect circuits are currently not available in the local region. | |
| 400 | EcNotEnoughResource | Insufficient access point resources. | Access point resources are insufficient. | |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | The specified IPv6 address and IPv6 gateway are not in the same VPC. | |
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | The number of specified user CIDR blocks has reached the quota limit. | |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | The router interface of the peer has been deleted. | |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | The NAT gateway instance is being deleted. Wait until the deletion process is complete. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | The route entries associated with the instance are in an unstable state. Try again later. | |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | The specified IPv6 gateway instance does not exist. | |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | The prefix list association does not exist. | |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | The specified resource type is not supported as a next hop. | |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | The specified vSwitch is in an unstable state. | |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | The specified next hop resource is in an unstable state. | |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | You are not authorized to operate on the specified resource. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | A route with the same prefix %s already exists. | |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | The route entry is in an unstable state. | |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | The specified route entry does not exist. | |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | The specified LeaseTime parameter is invalid. | |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | The specified Priority parameter is invalid or is the same as that of another traffic mirror session. | |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | The specified GatewayType parameter is invalid. | |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | The specified vSwitch does not exist. Check whether the input is correct. | |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | IPv6 is not enabled for the specified vSwitch. Enable IPv6 and try again. | |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | The specified IP address is not within the CIDR block of the vSwitch. Modify the parameters based on the metric description in the API documentation and retry. | |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | The specified number of IP addresses to allocate exceeds the upper limit. Modify the parameters based on the metric description in the API documentation and retry. | |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | The format of the specified IP address is invalid. Modify the parameters based on the metric description in the API documentation and retry. | |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | The specified IP addresses contain duplicates. Modify the parameters based on the metric description in the API documentation and retry. | |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | The specified IPv6 instance ID does not exist. Check whether the input is correct. | |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | The specified IPv4 gateway is in an unstable state. Try again later. | |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | The specified gateway route table instance is in an unstable state. Try again later. | |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | The specified gateway route table is already associated with a gateway instance of the same type. | |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | The specified gateway route table and gateway instance do not belong to the same VPC. Check whether the input is correct. | |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | The specified gateway route table does not support associating with the gateway instance. | |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | The specified gateway route table is not a border gateway route table. Check your input. | |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | The specified IPv6 gateway is in an unstable state. Try again later. | |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | The specified IPv6 address is invalid. Check your input. | |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | The specified NetworkType is invalid. Check your input. | |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | The specified IPv6 address does not exist. Check your input. | |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | The specified IPv6 instance is in an unstable state. Try again later. | |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | The current IPv6 instance is in an unassociated state and does not support the specified billing method. Refer to the metric description in the API documentation to modify the parameter and retry. | |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | The specified IPv6 instance is a single-line ISP instance and does not support the specified billing method. Refer to the metric description in the API documentation to modify the parameter and retry. | |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | The specified bandwidth is invalid. Refer to the metric description in the API documentation to modify the parameter and retry. | |
| 400 | OperationUnsupported.ULA | %s is unsupported. | This operation does not support ULA addresses. | |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | The specified IPv6 address and IPv6 gateway are not in the same VPC. Check your input. | |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | The VPC to which the IPv6 address belongs does not have an IPv6 gateway. Create an IPv6 gateway and try again. | |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | Internet bandwidth is already enabled for the specified IPv6 instance. Do not enable it again. | |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | The specified billing method requires Cloud Data Transfer (CDT) to be enabled. Enable CDT and try again. | |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | IPv6 Internet bandwidth does not support subscription. Refer to the metric description in the API documentation to modify the parameter and retry. | |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | The specified InternetChargeType is invalid. Refer to the metric description in the API documentation to modify the parameter and retry. | |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | The specified ChargeType is invalid. Refer to the metric description in the API documentation to modify the parameter and retry. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | Ipv6InstanceId and Ipv6InternetBandwidthId cannot both be empty. | |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | This operation is not allowed on managed instances. | |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | The specified Ipv6InstanceId does not exist. Check your input. | |
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | The quota for SNAT entries has been reached. | |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | This region does not support modifying the next hop of a route. | |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | An error occurred while querying CEN routes. | |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | The format of the destination CIDR block parameter is invalid. | |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The current state of the ENI does not support this operation. Try again later. | |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | The LOA status of the port does not allow completion reporting or circuit O&M. | |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | The next hop instance type for the route to be modified is missing. | |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | The next hop instance ID for the route to be modified is missing. | |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | The next hop type of the route is invalid. | |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | The next hop of a route that points to a standard NAT gateway cannot be modified. | |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | The next hop of the current route cannot be modified. | |
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | The specified route table does not exist. | |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | The specified next hop instance ID for the ENI type does not exist. | |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | The next hop of the target route already exists. | |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | Your available account balance is less than zero. Top up your account and try again. | |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | A connection already exists between the two routers. | |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | The operation failed due to a route conflict with existing routing. | |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | Routes that point to a gateway endpoint cannot be manually deleted. | |
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | A single VPN gateway does not support configuring both an IPsec server and an IPsec-VPN connection simultaneously. | |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | The TunnelId parameter is invalid. | |
| 400 | IllegalParam.Role | The specified Role is invalid. | The Role parameter is invalid. | |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | Your available account balance is less than zero. Top up your account and try again. | |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | Failed to synchronize the transaction information for the resource. | |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | Failed to query the subscription information of the instance. | |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | The operation failed because the VPC is not associated with the CEN instance. | |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | The operation failed because the VPC has not reached a steady state in the CEN instance. | |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | The route table does not support creating routes that point to this type of CEN instance. | |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | The operation failed because the specified CEN instance does not exist. | |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | The operation does not support bonded ENIs without secondary ENIs. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | The operation is allowed only when the HaVip instance is in the Available or InUse state. | |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | The customer gateway and VPN gateway of an IPsec-VPN connection cannot use the same IP address. | |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | Failed to delete the instance because an EIP is associated with the instance. | |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | The application failed because the IP address belongs to another user. | |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | The application failed because the IP address is locked. | |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | Multiple IPsec-VPN connections are associated with the same VPN gateway and customer gateway. The CIDR blocks for the interesting traffic of these connections must not overlap. | |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | Multiple IPsec-VPN connections are associated with the same VPN gateway and customer gateway. The pre-shared keys and IKE phase configuration parameters of these connections must be identical. | |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | The VPN gateway does not support policy routes that have the same source CIDR block, destination CIDR block, and weight. | |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | The VPN gateway does not support multiple policy routes with the same priority that have overlapping source and destination CIDR blocks. | |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | A dual-tunnel VPN gateway does not support policy routes that have the same source and destination CIDR blocks. | |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | The route prefix %s in the VPC route table is included in the client CIDR block of the IPsec server. | |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | The current VPN gateway type does not support enabling high availability. | |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | Enabling high availability is supported only for IPsec-VPN or SSL-VPN. | |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | The current region does not support enabling high availability. | |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | The zone of the primary vSwitch is not supported. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | The zone of the secondary vSwitch does not support the feature. | |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | The primary and secondary zones cannot be the same. | |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | The number of active IP addresses in the primary vSwitch is insufficient. | |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | A policy route with the same prefix %s already exists. | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | The same tunnel CIDR block exists in the BGP configurations of different IPsec tunnels. The tunnel CIDR block is %s. | |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | The route prefix %s in the VPC route table is included in the SSL-VPN client CIDR block. | |
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | The number of available IP addresses in the secondary vSwitch is insufficient. | |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes pointing to the HaVip in the same route table exceeds the limit. | |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | The bandwidth value of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | The localized company name is invalid. | |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | The company name is invalid. | |
| 400 | IllegalParam.LineType | Invalid LineType. | The type of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | The geographic location of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | The ID type of the construction engineer is invalid. | |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | The ID number of the construction engineer is invalid. | |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | The contact information of the construction engineer is invalid. | |
| 400 | IllegalParam.PmGender | Invalid PmGender. | The gender of the construction engineer is invalid. | |
| 400 | IllegalParam.PmName | Invalid PmName. | The name of the construction engineer is invalid. | |
| 400 | IllegalParam.Si | Invalid Si. | The construction company of the Express Connect circuit is invalid. | |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | The Express Connect circuit instance ID does not exist. | |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | The status of the Express Connect circuit [%] is abnormal. | |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | The construction status of the Express Connect circuit is abnormal. | |
| 400 | ResourceType.Unknown | Unknown ResourceType. | The resource type does not exist. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | A route with the same prefix %s already exists. | |
| 400 | IllegalParam.Bandwidth | [%s] | The bandwidth value [%s] of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | The localized company name [%s] is invalid. | |
| 400 | IllegalParam.CompanyName | [%s] | The company name [%s] is invalid. | |
| 400 | IllegalParam.LineType | [%s] | The Express Connect circuit type [%s] is invalid. | |
| 400 | IllegalParam.PeerLocation | [%s] | The geographic location [%s] of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.PmCertificateType | [%s] | The ID type [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmCertificateNo | [%s] | The ID number [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmContactInfo | [%s] | The contact information [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmGender | [%s] | The gender [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmName | [%s] | The name [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.Si | [%s] | The construction company [%s] of the Express Connect circuit is invalid. | |
| 400 | InvalidInstanceId.NotFound | [%s] | The Express Connect circuit instance [%s] does not exist. | |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | The instance status is incorrect. | |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | The construction status [%s] of the Express Connect circuit is abnormal. | |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | Construction is not allowed on shared Express Connect circuits. | |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | The status of the shared Express Connect circuit [%s] is incorrect. | |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The Alibaba Cloud user ID of the resource owner is invalid. | |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | The bandwidth of the Virtual Border Router exceeds the threshold of the Express Connect circuit. | |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | The operation failed because the instance is locked for O&M. | |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | The Express Connect circuit instance ID must be specified. | |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | The planned construction time must be specified. | |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | The construction engineer information must be specified. | |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | The router interface is not a virtual network interface used for connections. | |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | The router interface has been locked due to unpaid bills. | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | The OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId parameters must all be specified. | |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, or OppositeInterfaceOwnerId is incorrect. | |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, or OppositeInterfaceOwnerId is incorrect. | |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | The router owner information is incorrect. | |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | The VPC is not in a steady state. | |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | The active zone of the CloudBox Internet Shared Bandwidth does not match that of the EIP. | |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | The next hop type does not match the next hop instance. | |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | The specified IPv6 CIDR block is unavailable. | |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | An IPv4 gateway cannot be created because a VPN gateway already exists in the VPC. | |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | The operation is not allowed because the NFV service list cannot be retrieved. | |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | The current instance status is not stable. | |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | The Alibaba Cloud account is not allowed to directly enable the physical port. | |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | The access device is not allowed to directly enable the physical port. | |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | The current region does not support creating instances in the specified zone. | |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | The resource cannot be deleted because an EIP is being added to an Internet Shared Bandwidth instance. | |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | The cloud service type is invalid. | |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | Failed to query account information while placing the order. | |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | The specified private IP address does not match the vSwitch. | |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | The LocalGatewayIpAndMask parameter is invalid. | |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | Your current quota is insufficient. Contact your channel partner to increase the quota. | |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | The maximum number of flow log instances has been reached. | |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | You can perform this operation on the router interface only when its status is Active, Idle, or Inactive. | |
| 400 | ResourceQueryError | The specified resource is queried error. | An error occurred while querying the specified resource. | |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | The network ACL is associated with other resources. | |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | The operation failed because the default NAT CIDR block cannot be deleted. | |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s and %s do not match. | |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | The specified %s resource is not found. | |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | The operation cannot be performed because the BGP peer is in an invalid state. | |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | The operation failed because the default NAT IP address cannot be deleted. | |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. | |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | The InternalPort parameter is duplicated or already in use. | |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | The system route table cannot be disassociated. | |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | The vSwitch cannot be deleted because it is associated with a network ACL. | |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | The specified instance does not exist in the current VPC. | |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | The operation failed because the EIP instance status is invalid. | |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | The network ACL is being modified. | |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | The next hop of the route entry is duplicated. | |
| 400 | IpConflict | Client IP pool conflict with local IP range. | The client IP pool conflicts with the local IP address range. | |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | The client IP pool conflicts with other SSL-VPN servers in the same VPC. | |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | An SSL-VPN server already exists for the specified VPN gateway. | |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | You can delete a route table by using this operation only when the route table type is Custom. | |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | The vSwitch cannot be deleted because it is associated with a NAT gateway. | |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | The associated instance is in a transitional state. | |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | The IP address is in an incorrect state. | |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | The vSwitch cannot be deleted because it is used by an SNAT entry. | |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | The specified %s resource is not found. | |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | The status of %s[%s] is incorrect. | |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | The specified IP address was not found. | |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | No resources are available in the region. | |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | The specified object has dependent network ACL resources. | |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | The VPC route table quota has been exceeded. | |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | Failed to query the price when creating the order. | |
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | The VBR and the Express Connect circuit are not on the same access device. | |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | The DNAT public port %s is already in use. | |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | The NatIpCidr CIDR block is not within the user-defined CIDR block range. | |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | Failed to verify the sales conditions by using the subproject. | |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | The operation failed because it conflicts with other entries that specify any port or any protocol type. | |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | Failed to call the internal service. Try again later. | |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | The IP version specified in the parameter is invalid. | |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | The peer IP address parameter is missing. | |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | The peer IP address is invalid. | |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | The ResourceType parameter is missing. | |
| 400 | Ip.Allocated | The reserve ip has been allocated. | The reserved IP address has already been allocated. | |
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | The operation failed due to a conflict. Modifying Ipv6Cidr and DisableIpv6 at the same time is not allowed. | |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | The current EIP does not belong to a NAT service plan. | |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | The operation failed because the specified IPv6 CIDR block is not reserved. | |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | You cannot directly switch a bound route table to a system route table. | |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | The operation failed because the specified IPv4 gateway and route table do not belong to the same VPC. | |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | The operation failed because the specified CIDR block is in use. | |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | The DHCP options set in this region does not support a custom lease time. | |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | The number of traffic mirror sources associated with the traffic mirror destination exceeds the limit. | |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | The specified resource is not in the specified resource group. | |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | The router interface is locked due to overdue payments and cannot be operated. | |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | The router interface is a user-side interface and cannot be activated. | |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | An IPv6 egress-only rule already exists for the specified IPv6 instance. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | You can perform this operation on the router interface only when its status is Inactive. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | You can perform this operation only when the router interface is in the Idle state. | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be specified. | |
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, or OppositeInterfaceOwnerId is incorrect. The router interface or router may not exist, the parameters may not match, or the router interface is not the accepter of the connection. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | You can perform this operation only when the router interface is in the Active state. | |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | The specified router does not belong to your account. | |
| 400 | MissingParam.Zones | The Zones parameter is required. | The Zones parameter is required. | |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | The Zones parameter is invalid. | |
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | EIPs in the contiguous EIP group have been added to an Internet Shared Bandwidth instance. You cannot delete the contiguous EIP group. | |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | The size of the Zones array is invalid. | |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | You cannot specify the Zone and PublicIpAddressPoolId parameters at the same time. | |
| 400 | IllegalParam.Zone | The specified zone is invalid. | The Zone parameter is invalid. | |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | The CloudBox Internet Shared Bandwidth and the EIP are not in the same zone. | |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | The flow log cannot be started because the log delivery destination is invalid. | |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | The next hop instance of the route is locked for O&M and cannot be modified. | |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | The attempt to delete a VPC failed because the peer router interface is not deleted. | |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | The number of port ranges exceeds the limit. | |
| 400 | InvalidAccount.NotFound | The account is invalid. | The operation failed because the calling account is invalid. | |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | The operation failed because the NAT CIDR block overlaps with the VPC CIDR block. | |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | The specified private IP address does not exist. | |
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | Failed to query the information about the secondary elastic network interface (ENI). | |
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | The associated instance does not belong to your account. | |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | The feature to create a VPC by using IPAM is not supported. | |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | The operation is not supported in the current state of the resource. | |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | The specified device does not exist. | |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | The specified PhysicalConnectionId is not in the Allocated state. | |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | The specified high-availability virtual IP address and the route table do not belong to the same VPC. | |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | The specified traffic mirroring target instance does not exist. | |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | IPv6 is not supported in the current region. | |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | The specified IPv6 ISP is not supported. | |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | The specified address pool type is invalid. | |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | The specified IPv6 CIDR block is invalid. | |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | IPv6 CIDR block resources are insufficient. | |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | A vSwitch cannot be associated with a gateway route table. | |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | The specified IPv4 gateway instance does not exist. | |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | A route conflict occurs because the routing CIDR block conflicts with an existing prefix list. | |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | The operation failed because the prefix list route already exists. | |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | The SSL-VPN server port number must be in the range of 1 to 65535. | |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | The specified vSwitch CIDR reservation CIDR block cannot contain system-reserved IP addresses. | |
| 400 | IllegalParam.ResourceType | Invalid %s value. | The specified ResourceType parameter is invalid. | |
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | The specified router description is invalid. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | The specified vSwitch CIDR reservation mask must be greater than the vSwitch mask plus 2. | |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | The specified reserved CIDR block cannot contain IP addresses that are already in use. | |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | For a local route, only the next hop attribute can be modified. | |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | The format of the specified policy information is invalid. | |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | Routes with this type of next hop cannot be created. | |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | The requested resources are insufficient. To request more resources, submit a ticket. | |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | The IPv4 gateway cannot be deleted because it is required for scenarios where EIPs are bound to private IP addresses for Internet access. | |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | The Description parameter is invalid. Specify a valid value based on the request parameter requirements. | |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | The specified service is locked due to overdue payment. | |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | You cannot create a public IP address pool at the moment. Check whether your account is authorized to perform this operation. | |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | You have reached the quota for public IP address pools. Increase the quota before you proceed. | |
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | The error message returned because the specified route does not exist. | |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | The specified route entry is being configured. | |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | The user does not have permission to operate on this resource. | |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | The bandwidth specifications of a vRouter created on a shared port cannot be modified. | |
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | Flow log instances cannot be created in the current service state. | |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested FlowLog service. Make sure that you have subscribed to the service you are trying to use. | |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | The specified ReservedCidrMask is invalid. Specify a valid value based on the request parameter requirements. | |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | The number of CIDR reservations you have created has exceeded the limit. | |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | The specified VSwitchCidrReservation does not exist. Check whether the VSwitchCidrReservation is in an available state. | |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | Binding an EIP to an IP address is not supported. | |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | The current vSwitch is being used by a cloud service and cannot be deleted. Check the usage scenarios of the cloud service. | |
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | The fee is invalid. | |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | The current VPN connection is not associated with any certificate. | |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | BGP cannot be enabled in the current region. | |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | The Isp parameter is invalid. Specify a valid value based on the request parameter requirements. | |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | The Name parameter is invalid. Specify a valid value based on the request parameter requirements. | |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | The instance is locked due to overdue payment and cannot be operated on. | |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | The EIP instance is locked. | |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | The specified vSwitch does not exist. Check whether the vSwitch is in an available state. | |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | IPv6 is not enabled for the specified vSwitch. | |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | The specified reserved CIDR block does not meet the reservation requirements. | |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | You must specify either ReservedCidr or ReservedCidrMask. | |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | The ReservedCidrMask parameter is invalid. Specify a valid value based on the request parameter requirements. | |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. Specify a valid value based on the request parameter requirements. | |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | The VPC to which the specified vSwitch belongs does not support advanced features. Change to another vSwitch and try again. | |
| 400 | UnsupportedRegion | UnsupportedRegion | This feature is not supported in the current region. | |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | The elastic network interface does not exist. | |
| 400 | InvalidInstanceId | VPC does not exists. | The VPC instance does not exist. | |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | The source Simple Log Service project or Logstore does not exist. | |
| 400 | OperationUnsupported.action | This action is not support. | This operation is not supported. | |
| 400 | InvalidInstanceId | Instance does not exist. | The instance does not exist. | |
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | The specified project or Logstore does not exist. | |
| 400 | ParameterInvalid | Invalid parameter. | The request parameter is invalid. | |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | The Description parameter is invalid. | |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | The IPv6 address is invalid. | |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | The IPv6 instance ID is invalid. | |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | The NetworkType is invalid. | |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName is invalid. | |
| 400 | MissingParam | MissingParameter %s | A required parameter is missing. | |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | You are not allowed to operate on this tag key in this request. | |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | The system tag is invalid. | |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | The system is busy. Try again later. | |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | The current region is not supported. | |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | The specified Internet Shared Bandwidth instance does not exist. | |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | Querying Internet Shared Bandwidth instances that are connected to Cloud Data Transfer is not supported. | |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | The commodity code is invalid. Modify it and try again. | |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | The instance is not attached to the CEN. This operation is not allowed. | |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | Outbound data transfer billing is not enabled. This operation is not allowed. | |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | The number of prefixes exceeds the quota. | |
| 400 | ResourceInConfiguring | The resource is being configured. | The resource is undergoing a specification change. | |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | The specified vSwitch CIDR reservation does not exist. | |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | The interconnection IP address is duplicated. Change it and try again. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | The specified network interface %s does not exist. | |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | The current operation does not support classic load balancing instances. | |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | No certificate is associated with the VPN gateway. | |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | The peer ID is required when you create a ShangMi VPN connection. | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | One or more VPN connections on the specified customer gateway have not been deleted. | |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | One or more SSL servers on the specified VPN gateway have not been deleted. | |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | One or more GRE tunnels on the specified VPN gateway have not been deleted. | |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | The specified route entry does not exist. | |
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | An IP prefix is already assigned to the resource. Delete the IP prefix and try again. | |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | The peer IP address is duplicated. | |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | The local IP address is duplicated. | |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | The local IP address is duplicated. | |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | The interconnection IP address is duplicated. Change it and try again. | |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | The peer IP address is duplicated. | |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | Creating ECMP routes by using prefix lists is not supported. | |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | The current operation conflicts with the IP prefix of elastic network interface controllers (NICs). | |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | The EIP association type of this NAT gateway does not support this operation. | |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | This operation is not allowed because the user is not in the whitelist. | |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | The current region does not support associating an EIP with an IP prefix. | |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | The format of the VSwitchCidrReservationCidr parameter is invalid. | |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | The specified vSwitch does not exist. | |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | The specified ReservedType is not supported. | |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | IPv6 is not enabled for the specified vSwitch. | |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | The specified VSwitchCidrReservationCidr conflicts with an existing vSwitch CIDR reservation. | |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | The VSwitchCidrReservationMask and VSwitchCidrReservationCidr parameters cannot be empty at the same time. Specify one of them and try again. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | The VSwitchCidrReservationMask parameter is invalid. Modify it based on the metric description in the API documentation and retry. | |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | The VSwitchCidrReservationMask parameter exceeds the quota. Modify it based on the metric description in the API documentation and retry. | |
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | The number of vSwitch CIDR reservations exceeds the quota. | |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr conflict. Modify the parameters based on the parameter description in the API documentation and retry. | |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | The specified vSwitch does not have sufficient CIDR blocks to allocate a CidrReservation. | |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The status of the elastic network interface controller (NIC) is invalid. | |
| 400 | RuleExist | The rule already exists. | The rule already exists. | |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | The specified Ipv6AddressId and Ipv6InternetBandwidthId do not belong to the same instance. | |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | The specified Ipv6AddressId or Ipv6InternetBandwidthId does not exist. | |
| 400 | MissingParam.Tags | The Tags parameter is required. | The Tags parameter is required. | |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | The Ipv6InstanceId parameter is not specified. | |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | The specified Ipv6Instance resource does not exist. | |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | The operation is not allowed because the resource is financially locked. | |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | The operation is not allowed because the specified bandwidth instance does not exist. | |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | The operation is not allowed because the specified bandwidth exceeds the upper limit. | |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | The operation is not allowed because the bandwidth instance is in an unstable state. | |
| 400 | OperationFailed.RiskControl | Risk control check failed. | A security risk was detected with your payment method. Verify your payment method by using the link provided in the email or console message, and then resubmit the order. | |
| 400 | Price.SystemError | Price inquiry failed. | Price inquiry failed. Try again later. | |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | The account does not have a payment method configured, or the reserved balance is insufficient. | |
| 400 | OrderError | Failed to create the order. | Failed to create the order. Try again later. | |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | The specified GatewayEndpoint does not exist. | |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | The MaxResults parameter is invalid. | |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | The specified resource ID does not exist. | |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | You have not completed your basic personal information. Complete the information and try again. | |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | A default vSwitch already exists in the current zone. | |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | The operation failed because a default VPC already exists. | |
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | Failed to create the order due to concurrent operations. | |
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | You have not completed real-name verification. Go to the Account Center to complete the verification. | |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | The shared port is in the Terminated state. You cannot modify the VLAN. | |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | The shared port is locked due to overdue payment. You cannot modify the VLAN. | |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | The specified network ACL is not associated with the vSwitch. | |
| 400 | InvalidInstanceId | vswitch does not exist. | The vSwitch instance does not exist. | |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | Failed to associate the EIP with the ECS instance because the ECS instance does not exist or is not a VPC instance. | |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | The account balance is insufficient. | |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | The Tags parameter is missing. | |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | The specified ResourceType is not supported or is invalid. | |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | The specified resource group is invalid or does not exist. | |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | You cannot associate the gateway with the route table because they are not in the same VPC. | |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | The vpc_flowlog_public product does not have the enterprise cloud adoption tag. Internal users are not allowed to purchase it. | |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | The peer of the router interface is a VPC. This region does not support creating IPv6 routes with this type of next hop. | |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | The operation is denied because IPv6 is not enabled for the VPC. | |
| 400 | Unauthorized | This api does not support sub user or role. | This API does not support RAM users or roles. | |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | PrivateLink is not enabled for the NAT gateway. | |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | The local IP address parameter contains duplicates. Change the local IP address and try again. | |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | The peer IP address parameter contains duplicates. Change the peer IP address and try again. | |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | The local IP address parameter contains duplicates. Change the local IP address and try again. | |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | The local gateway IP address and subnet mask are invalid. Correct them and try again. | |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | The subnet mask is invalid. Correct it and try again. | |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | The physical port cannot be terminated because shared ports still exist. | |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | The deletion failed. The shared port must be deleted by the user who owns it. | |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | The deletion failed. The physical port must be deleted by the user who owns it. | |
| 400 | Forbidden.VBRExists | The vbr still exists. | The port cannot be deleted because virtual border routers (VBRs) still exist. | |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | Route entries pointing to this instance type are not supported in the gateway route table. | |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | The number of route entries that each BGP neighbor in the BGP group can receive exceeds the quota. | |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | Your basic information is incomplete. Complete the information first. | |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | Your current quota is insufficient. Contact your channel partner to increase the quota. | |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | An EIP cannot be associated with an ENI in both NAT mode and multi-EIP-to-ENI mode at the same time. | |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | The association failed because the ECS instance is being migrated. | |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | The EIP association failed because the IPv4 gateway is not enabled for the VPC. | |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | The IPv4 gateway is in an unstable state. | |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | The port type and bandwidth cannot be empty at the same time. | |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | This operation is not supported in the current instance status. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | The system failed to add the CIDR block to the address pool because the CIDR block or the subnet mask is not specified. | |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | Adding a CIDR block to the address pool failed because the CIDR block and subnet mask cannot be specified at the same time. | |
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | You do not have the permissions to manage the high-availability virtual IP address (HaVip). Apply for the required permissions in Quota Center. | |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The vSwitch cannot be deleted because a vSwitch CIDR reservation is in use. | |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | The specified TagKey parameter is duplicated. | |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | The specified TagValue parameter is invalid. | |
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | The specified TagKey parameter is invalid. | |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | The specified ASN is invalid. | |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You do not have the permissions to manage this resource. Apply for the required permissions and try again. | |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | The NAT gateway does not have a FULLNAT table. | |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | The specified FULLNAT entry is not found. | |
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | When BGP is enabled for the VPN gateway, BGP must also be enabled for the VPN connection. | |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | |
| 400 | Invalid.Grant | Can not grant to other owner cen. | Cross-account authorization of the VBR to another CEN is not supported. | |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | The specified route entry type is invalid. | |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | The specified region was not found during access authentication. | |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | The parameter is duplicated. | |
| 400 | MissingParam.%s | The param of %s is missing. | A required parameter is missing. | |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | The IPsec-VPN feature is not enabled for the VPN gateway. | |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | The specified VPN connection name is invalid. | |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | The Vpconn type is not supported. | |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | The specified route table type does not support creating route entries. | |
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | The quota limit is exceeded. | |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | The VLAN ID is already in use. | |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | The VBR cannot be deleted because it has BGP announced CIDR block configurations. | |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | The operation is too frequent. Wait a moment and try again. | |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | The current VPN version does not support setting the priority of policy route entries. | |
| 400 | InvalidParams.NotNull | params must not null. | The parameter cannot be empty. | |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | The specified LocalAsn of the BGP group is invalid. Only values from 64512 to 65534 or from 420000000 to 4294967294 are supported. | |
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | Specify the PeerIpAddress parameter. | |
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | The BGP peer cannot be created because the peer IP address is already in use. | |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | The PeerAsn parameter is invalid. | |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | The LocalAsn parameter is invalid. | |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | The operation is not supported. | |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | The Price parameter is invalid. | |
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | The InstanceChargeType parameter is invalid. | |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | The current instance status does not support this operation. | |
| 400 | InvalidAliuid | Invalid Aliuid. | The Aliuid parameter is invalid. | |
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | The bandwidth plan is insufficient. | |
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | The parameter cannot be null. | |
| 400 | INVAID.VBR.STATUS | VBR status must be active | The VBR state is invalid. | |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | Check the CEN status. | |
| 400 | ForbiddenAction | The user does not supported this action. | You do not have the required permissions. | |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | The subscription billing method is not supported. | |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | The specified router interface specification is invalid. | |
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | The VPC subnet does not exist. | |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | The health check IP address cannot be the same as the instance IP address. | |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | The health check IP address is invalid. | |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | The operation failed. | |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | The cross-region bandwidth plan is invalid. | |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | The VRouterType parameter is invalid. | |
| 400 | IllegalParam.Spec | The spec is illegal. | The specification is invalid. | |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | You do not have the permissions to create a cross-border router interface. | |
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | The RouterId parameter is invalid. | |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | The commodity does not exist. | |
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | The specified billing method for the router interface is invalid. | |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | The region ID is invalid. | |
| 400 | QuotaExceeded | RiPerUser quota exceeded | The number of VPC peering router interfaces created by the current user has reached the limit. | |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | The parameter is invalid. | |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | The router interface cannot be attached to the CEN. | |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | The specified CIDR reservation does not exist. Check whether the CIDR reservation is available. | |
| 400 | IllegalParamFormat | The param of %s is illegal. | The specified parameter is invalid. | |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The VbrOwnerId parameter is invalid. | |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | The VbrOwnerId specifies Resource Access Management (RAM) users or partner accounts, which cannot be used as the owner account of the VBR. | |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | You cannot create a VBR for another account on shared Express Connect circuits. | |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | The bandwidth of the VBR is inconsistent with the bandwidth of the associated shared Express Connect circuits. | |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | The Bandwidth parameter is invalid. | |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | A VBR has already been created for the shared Express Connect circuits. You cannot create another VBR. | |
| 400 | IllegalParamFormat | IllegalParamFormat | The parameter format is invalid. | |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | The CIDR format is invalid. | |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | You do not have the permission to create shared Express Connect circuits. Contact your account manager. | |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | The shared port UID cannot belong to Resource Access Management (RAM) users or partner accounts. | |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | The number of shared ports created on a single physical port has reached the limit. | |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | The ExpectSpec parameter is invalid. | |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | Only the physical port that owns the shared port can be modified. | |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | Only the account of the physical port to which the shared port belongs can modify these parameters. | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | The VBR is already referenced. | |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | The VBR cannot be deleted because an NQA exists. | |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | The IpAddress parameter is invalid. | |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | The CidrBlock parameter is invalid. | |
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | The LocalGatewayIp, PeerGatewayIp, and PeeringSubnetMask parameters are required and cannot be empty. | |
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | The VLAN ID is already in use. | |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | The VBR quota has been exceeded. | |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | The device quota has been exceeded. | |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | The region does not support IPv6. | |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | The bandwidth limit has been exceeded. | |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | The access device is disabled. You cannot create a VBR. | |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. | |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | The IP address pool instance is not in a stable state. You cannot allocate an EIP. | |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | The BGP peer IP address is duplicated. | |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | An EIP cannot be allocated because the IP address pool is in an incorrect state. | |
| 400 | IllegalParam.Isp | The param of %s is illegal. | An EIP cannot be allocated because the ISP parameter is invalid. | |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | The EIP association failed because an IPv4 gateway exists in the VPC. | |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | Internal-facing VPN gateways do not support the SSL feature. | |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | The network type is invalid. | |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | The quota for many-to-one DNAT sessions has been exceeded. | |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | A conflict exists between the gateway and routes of the current user. | |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | A conflict occurred during the VPN operation. Try again later. | |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGatewayId cannot both be empty. | |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | The specified public IP address pool instance does not exist. | |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | The public IP address pool has been shared with other users and cannot be deleted. | |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | The public IP address pool instance is a shared resource and cannot be modified. | |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | The peer does not exist. | |
| 400 | InvalidInstance.StatusError | The router instance status error. | An instance status fault occurred. | |
| 400 | Forbidden | The eip instance owner error | The EIP does not belong to the current caller. Check whether you have permissions to manage the EIP. | |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | Failed to create the order because the token is invalid. | |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | Authentication failed for the managed flow log operation. | |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | The peerIpAddress parameter is invalid. | |
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | You do not have permissions to manage the physical connection. | |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | The modified bandwidth parameter cannot be saved. | |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | Bandwidth for multiple physical connections is not supported. | |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | The VBR bandwidth quota is exceeded. | |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | The Bandwidth parameter is missing. | |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | The Bandwidth parameter is invalid. | |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | The InstanceId parameter is missing. | |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | The InstanceId parameter is invalid. | |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | You cannot perform operations on the Vpconn. | |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | You cannot skip the construction step to proceed to the next step. | |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | The state of the physical connection is invalid. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | The PhysicalConnectionId parameter is invalid. | |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | The PhysicalConnectionId parameter is missing. | |
| 400 | MissingParam.AliUid | AliUid is missing. | The AliUid parameter is missing. | |
| 400 | MissingParam.RegionNo | RegionNo is missing. | The RegionNo parameter is missing. | |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | The operation cannot be completed because FULLNAT entries depend on this NAT IP address. | |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | You cannot use an EIP that is being associated to create an SNAT entry. | |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | The NAT gateway is in an invalid state. | |
| 400 | Forbidden | The eip instance owener error | The EIP does not belong to the current caller. Check whether you have permissions to manage the EIP. | |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | A request conflict occurred. Try again later. | |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | The specified IPsec PFS is not supported. | |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | At least one authentication method (PSK or IDaaS) must be specified. | |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | When two-factor authentication is enabled, the IDaaS instance ID is a required parameter. | |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | The VPN service does not have permissions to manage your IDaaS instance. | |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | The network mask length of the client IP pool must be greater than or equal to 16 and less than or equal to 29. | |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | The specified client IP pool conflicts with a VPN connection or an SSL server. | |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | Failed to add the VPC route after the operation. | |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | The specified IDaaS instance ID does not exist. | |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | Operations on this instance are too frequent. Try again later. | |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | The specified VPN instance is not found. | |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | The route weight value is invalid. | |
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | The next hop specified for the route does not exist. | |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | The specified local BGP IP address is invalid. | |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | The specified tunnel CIDR block is invalid. | |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | When BGP is enabled, the tunnel CIDR block parameter is required. | |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | The maximum number of policy routes has been reached. | |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | The specified Pfs parameter in the IPsec-VPN connection is not supported. | |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | The specified authentication algorithm in the IPsec-VPN connection is not supported. | |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | The current VPN version does not support enabling BGP. | |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | Invalid parameter. When the DNAT forwarding protocol is set to Any, the source port and destination port must be set to 0. | |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | The specified vSwitch is not found during access authentication. | |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | The operation is too frequent. Try again later. | |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | The specified route is not found. | |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | |
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | The purchase quantity exceeds the maximum limit. | |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | The PmCertificateNo parameter is invalid. | |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | The instance status is invalid. | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | The VBR is dependent on a BGP group and cannot be deleted. | |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | The quota limit is exceeded. | |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | The status parameter is invalid. | |
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | The specified IP address is invalid. | |
| 400 | IncorrectStatus.null | RouterInterface status is null. | The RI status is empty. | |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | You do not have the permissions to perform this operation. | |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | Failed to create the IPv4 gateway because the IPv4 gateway feature is not supported. | |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | Failed to create the route because the number of VPN routes exceeds the limit. | |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | Failed to create the route because ECMP routes support only one non-RI type as the next hop. | |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | Failed to modify the gateway route. The next hop must first be changed to a local route before you can customize the next hop. | |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | No resources are available in the current zone. | |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | The operation failed. Only custom route entries support filtering by route ID or route name. | |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | The operation is not supported. Resource group IDs are not supported in Alibaba Finance Cloud. | |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | The number of VPC IDs exceeds the limit. | |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | The specified signature nonce has already been used. | |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | The specified AccessKey is not found. | |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | Failed to disassociate the route table from the gateway because no association exists. | |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | The specified gateway route table is not found. | |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | The modification failed because the specified route name is invalid. | |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | Failed to modify the route table attributes because the table name format is invalid. | |
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | The specified network ACL is not found. | |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | The operation failed because the IPv6 gateway is still in use. | |
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | The secondary CIDR block to be deleted cannot be found. | |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | The length of the rule entry name is invalid. | |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | The number of network ACL rules exceeds the limit. | |
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | The name of the rule entry is invalid. | |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | The number of port range mappings for a single IP address in the DNAT entry exceeds the limit. | |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | The TunnelCidr parameter is invalid. | |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | The current transit router does not support this operation. Upgrade the transit router and try again. | |
| 400 | IllegalParam.%s | The param of %s is illegal. | The specified parameter is invalid. | |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | You do not have permissions to manage the current resource. Apply for the required permissions and try again. | |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | The required parameter Ipv6CidrBlock is missing. | |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current status of the CBN does not support creating a vSwitch. | |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | The required parameter VpcId is missing. | |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | The flow log is in an invalid state and cannot be stopped. | |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | The specified instance is in an invalid state. | |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | A flow log instance already exists for the specified resource. | |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | The specified IP address is already in use by another resource. | |
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | The specified IP address falls outside the CIDR block of the vSwitch. | |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | IPv4 gateways are not supported in this region. | |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | An IPv4 gateway cannot be created because pass-through EIPs exist. | |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | The parameter pattern is invalid. | |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | The operation failed because the specified VPC cannot be found. | |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | The specified VPC peering connection cannot be found. | |
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | A pass-through ENI cannot be used as a next hop. | |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | The CIDR block mask is invalid. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | The number of IP addresses in the pool has reached the upper limit. | |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | The CIDR block is invalid. | |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | The instance to be associated is already associated. | |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | The specified route table is in an invalid state. | |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | The operation is not allowed because the route table type is invalid. | |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | The operation is not allowed because the specified IPv4 gateway is not activated. | |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | The specified IPv4 gateway is already associated. | |
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | The IDaaSInstanceId parameter is required when you enable two-factor authentication. | |
| 404 | InstanceNotExists | Instance not exists. | The instance to be deleted does not exist. | |
| 400 | Throttling.User | Request was denied due to user flow control. | The request was rejected due to client-side throttling. | |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | The instance status of the DNAT entry to be deleted is invalid. | |
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | The parameters do not match. Check the parameters. | |
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | The operation to disassociate the EIP failed because the SNAT or DNAT entry is in an unstable state. | |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | The CIDR block you added does not exist. | |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | The number of port range mappings for a single IP address in a DNAT entry must be less than 64. | |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | The operation is not allowed because the next hop remains unchanged. | |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | The protective rate-limiting rule has dependencies. | |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | The VPC cannot be deleted because an IPv4 gateway exists in the VPC. | |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | The Internet Shared Bandwidth cannot be deleted because it still contains EIPs. | |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | The resource deletion protection does not exist. | |
| 400 | DeletionProtection.OwnerError | The resource owner error. | You cannot perform this operation because you are not the owner of the resource. | |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | Deletion protection is enabled for the resource. | |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | The resource type is not supported. | |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | Subscription resources are not supported. | |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | The resource does not exist. | |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | The operation is performed too frequently, which causes task conflicts. | |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | The route configuration conflicts with the IPsec server. | |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | The route entry conflicts with the SSL client. | |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | The IPv4 gateway cannot be deleted because routes to the IPv4 gateway exist. | |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | The specified IPv4 gateway cannot be deleted because it is not found. | |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | The operation is not allowed because the specified IPv4 gateway is associated. | |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | The specified route table cannot be deleted because it still contains custom route entries. | |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | The specified route table cannot be deleted because it is associated with a gateway. | |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | The route table cannot be deleted in its current state. | |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | The status of the DHCP options set in the current VPC does not support VPC deletion. | |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current CBN state does not support the operation to delete a vSwitch. | |
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | The specified vSwitch instance was not found during the permission verification process. | |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | The current vSwitch cannot be deleted because operations are being performed on other subnets. | |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | A new IPv4 gateway cannot be created because an IPv4 gateway already exists in the VPC. | |
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | The operation is not supported because the instance is in a suspended state. | |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | Your quota is insufficient. Contact your channel partner to increase the quota. | |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | The load balancing ID does not exist. | |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | The specified key cannot be cleared because it is not empty. | |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | The specified VLAN ID is already in use. | |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | The specified port type does not exist. | |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | The bandwidth value associated with the Express Connect circuit is invalid. | |
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | The operation on the Express Connect circuit is invalid. | |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | The port type of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | The ClientToken parameter is invalid. | |
| 400 | InvalidPortType.NotFound | Specified port type is not found. | Ports of the specified specification are out of stock. | |
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | The Status parameter is invalid. | |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | The AliUid parameter of the Vpconn is invalid. | |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | The specified value of the Description parameter is invalid. | |
| 400 | InvalidName.Malformed | The specified Name is not valid. | The value of the Name parameter is invalid. | |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | The VLAN ID is invalid. | |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | The Spec parameter is invalid. | |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | The VPC connection cannot be created. | |
| 400 | MissingParam.Spec | The param of Spec is missing. | The Spec parameter is missing. | |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | The operation does not support access to the access device. | |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | The specified VBR is already associated. | |
| 400 | MissingParam.VbrId | You must specify VbrId. | The VBR ID is missing. | |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | Dependent BGP peers exist. | |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | The health check IP address is invalid. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | You can perform this operation on the HaVip only when its status is Available or InUse. | |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | Failed to add a route to the client CIDR block. Check the VPC route entries and related quotas. | |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | The current client CIDR block is unavailable. | |
| 400 | OperationFailed.AssociationExist | The association already exists. | The operation failed because the current resource is being associated. | |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | The current VPN instance is already associated with a certificate of the same type. | |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | The client CIDR block conflicts with other resources in the VPC. | |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | The client CIDR block (%s) is invalid. | |
| 400 | VpnConnection.Configuring | The specified service is configuring. | The service is being configured. Please try again later. | |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | The destination address is invalid. | |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | The security group is managed and cannot be used. | |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | The security group does not exist in this VPC. | |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId and natGatewayId cannot both be empty. | |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGateway cannot both be empty. | |
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId and natGatewayId cannot both be empty. | |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | The VBR is already associated with a physical connection. | |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | The specified trafficPath parameter is invalid. | |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | The specified trafficPath parameter contains duplicate values. | |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | IPv6 address resources are insufficient. | |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | The natGatewayId parameter is invalid. | |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | This operation cannot be performed because the NAT gateway has dependent endpoint services. | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | This operation cannot be performed because the NAT gateway has dependent route entries. | |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | This operation cannot be performed because there are dependent NAT IP addresses. | |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | This operation cannot be performed because the NAT gateway has dependent NAT IP CIDR blocks. | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | This IP address is already used by DNAT and cannot be used for SNAT. | |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | This source IP address cannot be used because it is already used for SNAT. | |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | This FULLNAT rule already exists. | |
| 400 | Instance.StatusError | The status of instance error. | The instance status is invalid. | |
| 404 | VRouterId.NotFound | The VRouter not found. | The vRouter instance is not found. | |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | The custom flow log trafficPath feature is not supported for the current user. | |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | You are not allowed to perform operations on system prefix lists. | |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | The specifications of NAT gateways that use the pay-as-you-go billing method cannot be modified. | |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | The maximum number of route entries in the prefix list exceeds the maximum number of route entries allowed by the associated route table. | |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | The destination IPv6 address specified in the route is within the vSwitch CIDR block. | |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | The specified zone does not support protected NAT gateways. | |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | You have reached the quota limit for creating enhanced NAT gateways in the current VPC. | |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | The specified destination IPv6 CIDR block in the route entry overlaps with the vSwitch CIDR block. | |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | The current vSwitch does not have enough available private IP addresses. | |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | You cannot create an Anti-DDoS (Enhanced) EIP because you have not purchased the Anti-DDoS Origin service. | |
| 404 | Instance.NotExist | The instance not exist. | The instance does not exist. | |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | The prefix list is in a transitional state and does not support this operation. | |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | You cannot delete the prefix list because it is still referenced by other resources. | |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | You cannot delete the prefix list because it is currently shared. | |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | You cannot perform this operation on a shared prefix list. | |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | The number of CIDR blocks to be deleted exceeds the total number of CIDR blocks in the prefix list. | |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | The specified region does not support prefix list-based routes. | |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | You cannot perform this operation on a system prefix list. | |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | The operation failed because the prefix list does not have the specified reference relationship. | |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | The FULLNAT table does not exist. | |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | The number of route entries exceeds the maximum limit allowed for the prefix list. | |
| 400 | InvalidDescription.Malformed | The Description is illegal. | The specified resource description is invalid. It must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 400 | InvalidName.Malformed | The attribute name is illegal. | The specified name format is invalid. | |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | The specified IP version is not supported. | |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | The specified maximum number of entries exceeds the limit. | |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | The number of specified CIDR blocks exceeds the maximum allowed count. | |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | The specified CIDR block parameter is invalid. | |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | The specified CIDR name is invalid. | |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | You have reached the maximum number of prefix lists that you can create. | |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | You cannot perform this operation on a system prefix list. | |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | You cannot delete a shared prefix list. | |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | The specified sampling interval parameter is invalid. | |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | The associated resource does not exist. | |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | The gateway route table does not exist. | |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | The number of destination IP port mappings exceeds the quota. | |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | The specified Alibaba Cloud account ID for the Vpconn is invalid. | |
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | The specified router interface specification is invalid. | |
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | The owner of the instance is invalid. | |
| 400 | Forbbiden | The router does not belong to your account. | The specified router does not belong to your account. | |
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | The specified parameters for modifying the router interface are invalid. | |
| 400 | InvalidName.Malformd | The attribute name is illegal. | The specified attribute name is invalid. | |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | The specified region is not managed by the service endpoint domain name. | |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | The BondRi connection does not exist. | |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | The specified VBR is still in use. | |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | This operation is not allowed because the instance is a managed resource. | |
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | Insufficient bandwidth resources. | |
| 400 | OrderError.EIP | The Account failed to create order. | Failed to place the order. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | The next hop elastic network interface (ENI) does not exist. | |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | The next hop instance does not exist. | |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | The specified destination address is invalid. | |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | The instance does not exist. | |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | The NAT IP resource cannot be found. | |
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | Frequent purchases and releases of EIPs have been detected in your account. You are temporarily restricted from making new purchases. | |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | Duplicate route CIDR blocks exist. | |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | The operation failed because the outbound traffic service is not enabled. | |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | The next hop instance does not exist. | |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | A dependency conflict occurred because a custom route table exists. | |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | The default vSwitch already exists. | |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | Creating VPC peering connections between Alibaba Finance Cloud accounts and regular accounts is not allowed. | |
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM authentication failed. | |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | You cannot create IPv6 routes on a custom route table. | |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | You have reached the maximum purchase limit. | |
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | Your account type does not support this transaction. | |
| 400 | Forbidden.Convert | User does not have permission to operate. | The user does not have permission to perform this operation. | |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | The specified route table is already associated. | |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | The operation failed because the VBR is already associated with a CEN. | |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | The account does not have a valid payment method. | |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | The operation is not allowed because the router interfaces are in different zones. | |
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | The specified VPC does not exist. | |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | The specified traffic mirror source and traffic mirror session are already associated. | |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | The specified traffic mirror source and traffic mirror session are not associated. | |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | The operation is not allowed because the zone is a CloudBox zone. | |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | The operation is not allowed because the route table contains a route entry whose next hop points to a CloudBox VBR. | |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | The operation is not allowed because the route table contains a route entry whose next hop points to a VBR that is not in this CloudBox. | |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | The operation is not allowed because the vSwitch is a CloudBox vSwitch. | |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | The operation is not allowed because only custom route tables can contain route entries whose next hops point to CloudBox VBRs. | |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | CloudBox does not support creating high-availability virtual IP addresses. | |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | The specified ENI is not associated with any ECS instance. | |
| 400 | UnsupportedRegion | The feature is not supported in current region. | This feature is not supported in the current region. | |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | The specified ECS instance does not exist. | |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | The specified SLB instance does not exist. | |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | The specified SLB instance does not belong to any VPC. | |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | The ECS instance does not support traffic mirroring. | |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | The number of traffic mirror sessions has exceeded the limit. | |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | The quota for the number of traffic mirror sessions associated with the traffic mirror filter has been exceeded. | |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | The number of traffic mirror sources associated with a single traffic mirror session exceeds the quota. | |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | The number of traffic mirror sessions associated with a single elastic network interface (ENI) exceeds the quota. | |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | The number of traffic mirror sessions associated with a single SLB instance exceeds the quota. | |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | The specified traffic mirror session does not exist. | |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | The instance ID parameter for the traffic mirror filter rule is not specified. | |
| 400 | MissingParam.Rules | You must specify rule instance ID. | The instance ID of the traffic mirror filter rule is not specified. | |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | The number of parameters for the traffic mirror filter rule is invalid. | |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | The instance ID parameter for the traffic mirror filter rule is invalid. | |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | The instance ID parameter for the traffic mirror source is not specified. | |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | The status of the traffic mirror session is invalid. | |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | The number of filter rules associated with a single traffic mirror filter exceeds the quota. | |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | The specified traffic mirror filter rule does not exist. | |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | An elastic network interface (ENI) cannot serve as both the source and the destination of a traffic mirror session. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | The specified elastic network interface (ENI) does not exist. | |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | The format of the destination CIDR block is invalid. | |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | The format of the source CIDR block parameter is invalid. | |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | The format of the source port range parameter is invalid. | |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | The format of the destination port range parameter is invalid. | |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | The instance ID parameter for the filter is not specified. | |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | The specified traffic mirror filter does not exist. | |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | The status of the traffic mirror filter is invalid. | |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | The status of the traffic mirror filter rule is invalid. | |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | One or more traffic mirror sessions still depend on the current resource. | |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | The traffic mirror filter rule is not specified. | |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | The number of inbound filter rules is invalid. | |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | The number of outbound filter rules is invalid. | |
| 400 | MissingParam.Priority | You must specify Priority. | The priority parameter is not specified. | |
| 400 | MissingParam.Protocol | You must specify Protocol. | The protocol parameter is not specified. | |
| 400 | MissingParam.Action | You must specify Action. | The action parameter is not specified. | |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | The destination CIDR block is not specified. | |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | The source CIDR block is not specified. | |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | The priority parameter is invalid. | |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | The protocol parameter is invalid. | |
| 400 | IllegalParam.Action | The specified Action is invalid. | The action parameter is invalid. | |
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | The region of the elastic IP address (EIP) must be the same as that of the associated instance. | |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | You cannot specify a next hop that is associated with multiple IPv6 addresses. | |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | The ShareType parameter is invalid. | |
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | The specified vSwitch does not exist. | |
| 400 | IncorrectBusinessStatus.TrafficMirror | The business status of traffic mirror is incorrect. | The commercial status of traffic mirroring is invalid. | |
| 400 | OptInRequired.TrafficMirror | You need to subscribe to the traffic mirror service first. | The traffic mirroring service is not activated. | |
| 400 | QuotaExceeded.TrafficMirrorFilter | The maximum number of traffic image filters is exceeded. | The number of traffic mirror filters has exceeded the quota. | |
| 400 | IllegalParam.PortRange | The specified port range is invalid. | The port range parameter is invalid. | |
| 400 | IllegalParamFormat.Name | The specified Name is invalid. | The format of the name parameter is invalid. | |
| 400 | IllegalParamFormat.Description | The specified description is invalid. | The format of the description parameter is invalid. | |
| 400 | IpInstanceId.BizStatusInvalid | The specified EIP BizStatus is incorrect. | The business status of the specified EIP is invalid. | |
| 400 | OperationUnsupported.BindMultipleType | You cannot bind HaVip to multiple instance types. | You cannot associate with an ECS instance and attach a network interface controller (NIC) at the same time. | |
| 400 | InvalidNetworkInterfaceId.NotFound | The network interface is not found. | The ENI does not exist. | |
| 400 | OperationUnsupported.BindOnFreeNetworkInterface | The network interface must be attached to an ECS instance. | The ENI must be associated with an ECS instance. | |
| 400 | OperationFailed.QueryNetworkInterfaceInfo | Failed to query network interface information. | The system failed to query the ENI information. | |
| 400 | IllegalParam.InstanceType | The specified instance type is invalid. Only ECS instances and network interface are allowed. | The associated instance type is not supported. | |
| 400 | OperationUnsupported.BindOnSameEcs | You cannot bind two network interfaces on the same ECS instance. | You cannot associate two ENIs that are attached to the same ECS instance. | |
| 400 | OperationUnsupported.HavipBindType | You cannot bind HAVIP to network interface in the specified region. | ENI association is not supported in the current region. | |
| 400 | IllegalParam.OwnerAliUid | The specified AliUid is invalid. | The user ID parameter is invalid. | |
| 400 | InvalidInstance.NotExist | The bound instance does not exist. | The associated instance does not exist. | |
| 400 | InvalidIpInstanceId.NotFound | The specified Eip InstanceId does not exist in our records. | The specified EIP does not exist. | |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId is already added to the bandwidth package. | The EIP has already been added to a bandwidth plan. | |
| 400 | IllegalParam.LocalAsn | The specified LocalAsn is invalid. | The local autonomous system number is invalid. | |
| 400 | IllegalParam.LocalBgpIp | The specified LocalBgpIp is invalid. | The local BGP IP address is invalid. | |
| 400 | OperationUnsupported.SetNatTraversal | Current version of the VPN does not support setting NAT traversal. | The current VPN gateway version does not support NAT traversal. | |
| 400 | OperationUnsupported.SetDPD | Current version of the VPN does not support setting DPD. | The current VPN gateway version does not support Dead Peer Detection (DPD). | |
| 400 | MissingParam.CustomerGatewayAsn | Asn of customer gateway is mandatory when BGP is enabled. | When BGP is enabled, the autonomous system number of the customer gateway cannot be empty. | |
| 400 | OperationFailed.InvalidStatus | Route entry is not allowed to operate in current status. | You cannot perform operations on the route entry in the current state. | |
| 400 | VpnRouteEntry.BackupRoute | Validate backup route entry failed. | The validation of the active/standby routes failed. | |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to a non-RI and non-VPN next hop on the same network block. | A route to a resource other than a router interface or a VPN gateway already exists for the same CIDR block in the VPC route table. | |
| 404 | ResourceNotFound.NatGateway | The NatGateway instance not exist. | The NAT gateway does not exist. | |
| 400 | OperationUnsupported.IpNotInCbwp | The specified eip not exist in the commonBandwidthPackage. | The EIP does not exist in the bandwidth plan. | |
| 400 | VpnRouteEntry.AlreadyExists | The specified route entry is already exist. | The route already exists. | |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting pbr route entry priority. | The current VPN gateway version does not support the policy-based route priority feature. | |
| 400 | OperationFailed.HavipBoundPortmap | Operation failed because Havip instance already bound portmap. | The operation failed because the HaVip is already associated with a port mapping. | |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | When an ENI is associated with a passthrough EIP, the ENI must be disassociated from the ECS instance. | |
| 400 | InvalidStatus.NotAllow | Bind instance status invalid | The instance status of the attached instance is invalid. | |
| 404 | OperationDenied.VpcIpv4GatewayEnabled | The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway. | The operation is not allowed because the IPv4 gateway is already enabled for the VPC of the NAT gateway. | |
| 400 | QuotaExceeded.NumberOfEip | Binded eip Quota exceed on this NatGw. | The number of EIPs associated with the NAT gateway has exceeded the quota limit. | |
| 400 | InvalidAction.Denied | Action is denied due to unfinished Eip configuration modification. | The operation was rejected because the EIP configuration modification is incomplete. | |
| 400 | UnsupportedFeature.NatQosEntry | The specified natGateway can not support the qos entry feature. | The NAT instance does not support the protective throttling feature. | |
| 400 | ResourceAlreadyExist.NatQosEntry | The specified natGateway qosEntry already exists | The throttling rule already exists. | |
| 400 | ResourceQuotaExceeded.NatQosEntry | The specified natGateway qosEntry quota exceed. | The number of protective throttling entries for the NAT gateway has reached the quota limit. | |
| 400 | ResourceNotFound.QosTableIdOrNatGatewayId | natGatewayId and qosTableId can not both be null | The natGatewayId and qosTableId parameters cannot both be empty. | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | The %s and %s parameters are mutually exclusive. | |
| 400 | IncorrectStatus.NatGateway | The status of natgateway is incorrect. | The status of the NAT gateway is invalid. | |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | The %s resource depends on %s. Therefore, this operation cannot be completed. | |
| 400 | InvalidParams.NotNull | The parameter must not be null, name or description or icmpReplyEnabled | The name, description, and ICMP retrieval enable parameter cannot all be empty. | |
| 400 | IncorrectStatus.NATGW | NATGW status is invalid. | The status of the NAT gateway is invalid. | |
| 400 | UnsupportedFeature.IcmpReplyEnabled | The feature of IcmpReplyEnabled is not supported. | Modifying the ICMP retrieval enable feature is not supported. | |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | The VPC cannot be deleted because it has reverse access authorization relationships. | |
| 400 | OperationDenied.DeleteManagedRouteEntry | The operation is not allowed because of route entry is managed. | Routes managed by cloud services cannot be deleted. | |
| 400 | OperationDenied.ModifyManagedRouteEntry | The operation is not allowed because of route entry is managed. | Routes managed by cloud services cannot be modified. | |
| 400 | UnsupportedFeature.IndirectConvertForVpcNat | The VPC NAT gateway is not support to change EIP bond type. | VPC NAT gateways do not support modifying the EIP binding type. | |
| 400 | OperationDenied.EipBondTypeIsAlreadyNAT | The EIP bond type is already NAT type. | The EIP binding type is already NAT. | |
| 400 | UnsupportedFeature.NormalNatModifyEipBindMode | The normal NAT gateway is not support to change EIP bond type. | Standard NAT gateways do not support modifying the EIP binding type. | |
| 400 | UnsupportedFeature.IndirectConvertForFwNat | The security protection enabled NAT gateway is not support change EIP bond type. | Internet NAT gateways with protection enabled do not support modifying the EIP binding type. | |
| 400 | UnsupportedFeature.FwNatInMutilBindedEipBindType | The FW NAT in MUTIL_BINDED eip bind type is can not be created. | You cannot create a protection instance with the EIP binding type set to MUTIL_BINDED. | |
| 403 | Forbidden.ModifyEipBondType | Authentication is failed for modify EIP bond type. | Modifying the EIP binding type is not allowed. | |
| 400 | OperationDenied.NoEnoughAvailablePrivateIps | The available private Ip number is not enough in your subnet. | The subnet does not have enough available private IP addresses. | |
| 400 | OperationDenied.NatGatewayStatusInvalid | The NAT gateway status is invalid. | The NAT gateway status is invalid. | |
| 400 | OperationDenied.EipStatusInvalid | The NAT gateway has EIP in invalid status. | The status of the EIP associated with the NAT gateway is invalid. | |
| 400 | OperationDenied.SnatEntryStatusInvalid | The NAT gateway has SNAT entry in invalid status. | The status of the SNAT entry configured for the NAT gateway is invalid. | |
| 400 | OperationDenied.DnatEntryStatusInvalid | The NAT gateway has DNAT entry in invalid status. | The status of the DNAT entry configured for the NAT gateway is invalid. | |
| 400 | nsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not support to enable security protection. | VPC NAT gateways do not support enabling security protection. | |
| 400 | QuotaExceeded.EipNumForModifyEipBondType | The quota of %s is exceeded, binded: %s, quota: %s. | The number of EIPs exceeds the limit for modifying the EIP binding type. | |
| 400 | UnsupportedFeature.MutilBindedTypeNatEnableFw | The NAT with Mutil-Binded Eip bind type is not support enable firewall. | You cannot enable the firewall for a NAT gateway with EIPs associated in Mutil-Binded mode. | |
| 400 | UnsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not supported to enable security protection. | VPC NAT gateways do not support enabling security protection. | |
| 400 | ResourceNotEnough.SwitchAvailableIps | The available private Ip number is not enough in your subnet. | The subnet does not have enough available private IP addresses. | |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | The vSwitch cannot be deleted because it has joined a multicast domain. | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The DryRun check passed. | |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | The Express Connect authorization relationship does not exist. | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | The tag and resource group cannot both be empty. | |
| 400 | MissingParameter.TagKey | The input parameter TagKey that is mandatory for processing this request is not supplied. | The TagKey parameter is missing. | |
| 400 | MissingParameter.TagValue | The input parameter TagValue that is mandatory for processing this request is not supplied. | The TagValue parameter is missing. | |
| 400 | InvalidTagKey | The tag keys are not valid. | The tag index is invalid. | |
| 400 | InvalidTagValue | The tag values are not valid. | The tag value is invalid. | |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | The instance type was not found. | |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | The instance ID was not found. | |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | You do not have permission to operate on TagKeys. | |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | The quota limit is exceeded. | |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | The number of resource group IDs exceeds the limit. | |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | The resource scope is invalid. | |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | The number of tags exceeds the limit. | |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | Duplicate tag resources exist. | |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because the status of this RouterInterface is not correct. | The instance cannot be deleted in its current state. Wait for the state to change and try again. | |
| 400 | OperationDenied.UseGatewayRouteEntryQueryInterface | Use listGatewayRouteTableEntries to describe gateway route entries. | To query routes in a gateway route table, call the listGatewayRouteTableEntries operation. | |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in ec region list. | The specified region ID is invalid. | |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because status of this RouterInterface is not correct. | The instance cannot be deleted in its current state. Wait for the state to change and try again. | |
| 400 | UnsupportedRegion | The feature of prefixList entry is not supported in this region. | Prefix list routes are not supported in the current region. | |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | Duplicate CIDR blocks are specified. | |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | The specified prefix list does not exist. | |
| 400 | OperationDenied.NormalNatExist | The operation is not allowed because of existing normalNat. | The operation is not allowed because a standard NAT gateway exists in the VPC. | |
| 400 | OperationDenied.DirectEipExist | The operation is not allowed because of existing directEip. | The operation is not allowed because a pass-through EIP or an enhanced NAT gateway exists in the VPC. | |
| 400 | OperationDenied.SubnetRouteV1Exist | The operation is not allowed because of existing subnetRouteV1. | The operation is not allowed because the subnet routes in the VPC do not meet the specification requirements. | |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because of VpcPeerExists. | The operation is not allowed because VPC peering connection instances exist in the VPC. | |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because the VpcPeer exists. | The operation is not allowed because VPC peering connections exist in the VPC. | |
| 400 | ResourceNotFound | The specified resource %s is not found. | The specified resource does not exist. | |
| 400 | IllegalParam.ipVersion | The IP version does not match. | The IP version does not match. | |
| 400 | OperationUnsupported.VirtualBorderRouterEnableIPv6 | The operation failed. The device or region does not support IPv6 functions. | The operation failed because the device or region does not support IPv6. | |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | The router interface does not support IPv6. | |
| 400 | IllegalParam.VlanId | The parameter VlanId is illegal. | The VLAN ID parameter is invalid. | |
| 400 | IllegalParam.Spec | The parameter Spec is illegal. | The Spec parameter is invalid. | |
| 400 | OperationFailed.VPconnCreated | The operation failed because VPconn is already created. | The virtual physical connection already exists. Do not create it again. | |
| 400 | OperationDenied.VpconnVBRAssociatePconn | The operation is not allowed because of VpconnVBRAssociatePconn. | The operation failed because binding a physical connection to the virtual border router of a virtual physical connection is not allowed. | |
| 400 | OperationFailed.VbrBindedPconn | The operation failed because of VbrBindedPconn. | The operation failed because the virtual border router is already bound to a physical connection. | |
| 400 | OperationDenied.VBRAssociateVPconn | The operation is not allowed because of VBRAssociateVPconn. | Binding a virtual physical connection to a virtual border router is not allowed. | |
| 400 | OperationDenied.VPconn | The operation is not allowed because of VPconn. | This operation is not supported for virtual physical connections. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of [%s] is incorrect. | The state of the physical connection is invalid. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s is incorrect. | The state of the physical connection is invalid. | |
| 400 | IncorrectStatus.VBR | The status of VBR is incorrect. | The state of the virtual border router is invalid. | |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The operation failed because of VirtualPhysicalConnectionExistVBR. | A virtual border router already exists for the virtual physical connection. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of PhysicalConnection is incorrect. | The Express Connect circuit is in an invalid state. | |
| 400 | OperationFailed.BandwidthOrVlanIdEmpty | The specified VBR bandwidth or VlanId is empty. | The bandwidth or VLAN ID of the selected virtual border router is empty. | |
| 400 | IllegalParam.SecondaryCidrBlock | SecondaryCidrBlock is illegal. | The secondary CIDR block parameter is invalid. | |
| 400 | OperationFailed.IpV6VSwitchInuse | Operation failed because some vswitch ipv6 is in use. | The IPv6 vSwitch is still in use. | |
| 400 | QuotaExceeded.GUAIpv6CidrBlock | GUAIpv6CidrBlock quota exceeded. | The GUA IPv6 CIDR block has reached the quota limit. | |
| 400 | VpnRouteEntry.Conflict | The specified route entry has conflict. | A route conflict exists. | |
| 400 | IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current state of the CBN is invalid. | |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | The vSwitch is associated with a route table and cannot be deleted. | |
| 400 | OperationUnsupported.ForwardEntry | Duplicated destination ip port is unsupported. | Duplicate destination IP ports are not supported. | |
| 400 | OperationFailed.UnpaidBillsExist | The account has unpaid bills. Please pay your overdue bill first. | The account has unpaid orders. | |
| 400 | OperationFailed.Ipv6InstanceExist | Operation failed because vswitch has ipv6 instance. | An IPv6 instance exists in the vSwitch. | |
| 400 | OperationFailed.CidrInUse | Operation failed because cidr is in use. | The CIDR block is already in use. | |
| 400 | OperationFailed.InvalidCidrBlock | Operation failed because the specified network block is invalid. | The CIDR block is invalid. | |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | A route conflict exists in the route table. | |
| 400 | OperationUnsupported.AdvancedFeature | Advanced features of the vpc is unsupported. | The advanced feature is not supported. | |
| 400 | OperationUnsupported.BindOnMultipleVswitch | The bound instance and HaVip must be on the same vSwitch. | The associated instance and the HaVip must reside on the same vSwitch. | |
| 400 | OperationFailed.InformationIncomplete | Your information is incomplete. | The input information is incomplete. | |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | The specified priority parameter duplicates an existing priority. | |
| 400 | OperationFailed.PconnAllocateVlan0 | Vlan 0 Vbr cannot share the physical connection with another Vbr. | VLAN 0 cannot coexist with other VBRs on the Express Connect circuit. | |
| 400 | OperationFailed.PconnExistVlan0Vbr | The physical connection has VLAN 0 VBR. You cannot create another VBR. | A VLAN 0 VBR already exists on the Express Connect circuit. No other VBRs can be created. | |
| 400 | OperationFailed.Vlan0VbrUnSharePconn | VLAN 0 VBR cannot share the physical connection with another VBR. | Other VLAN 0 VBRs already exist on the Express Connect circuit. A VLAN 0 VBR cannot be created on this circuit. | |
| 400 | Forbidden.NatPayBySpec | Pay-by-specification NAT is no longer supported. Newly purchased pay-as-you-go NAT gateways only support the pay-by-CU metering method. | NAT gateways billed by specification are no longer available. Select a NAT gateway billed by capacity unit (CU) usage. | |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | The specified operation is not allowed because the router interfaces point to different VPCs. | |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | The specified operation is not allowed because the next hop of the route entry to be added is a router interface whose peer is a VBR, and it cannot be in the idle state. | |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | The specified operation is not allowed because the route table is associated with a CloudBox vSwitch, and route entries pointing to other CloudBox VBRs cannot be added. | |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | The CidrBlock parameter is invalid. | |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | The specified operation is not allowed because the route table is associated with a non-CloudBox vSwitch, and route entries pointing to CloudBox VBRs cannot be added. | |
| 400 | UnsupportedFeature.CloudBoxIpv6 | The IPv6 feature is not supported by cloud box. | CloudBox does not support the creation of IPv6 addresses. | |
| 400 | OperationDenied.NatgwExist | The operation is not allowed because the NAT gateway exists in VPC. | The specified operation is not allowed because a NAT gateway is created in the VPC. | |
| 400 | OperationDenied.CenAttached | The operation is not allowed because the VPC is attached to CEN. | The specified operation is not allowed because the VPC is associated with a CEN instance. | |
| 400 | OperationDenied.CloudBoxVSwitchExist | The operation is not allowed because a cloud box type vSwitch exists in VPC. | The specified operation is not allowed because CloudBox vSwitches exist in the VPC. | |
| 400 | OperationDenied.CloudBoxResourceExist | The operation is not allowed because there are resources related to the cloud box in VPC. | The specified operation is not allowed because CloudBox-related resources exist in the VPC. | |
| 400 | OperationDenied.VpcPeerExist | The operation is not allowed because the VPC peer exists. | The specified operation is not allowed because VPC peering connections exist in the VPC. | |
| 400 | OperationFailed.QueryCenIpv6Status | Failed to query the IPv6 status of the specified VPC in CEN. | Failed to query the IPv6 status of the VPC in the CEN instance. | |
| 400 | OperationUnsupported.CenIpv6Enabled | The IPv6 feature is enabled in CEN. | The IPv6 feature is already enabled in the CEN instance. | |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | The operation failed because outbound traffic is not enabled. | |
| 400 | OperationFailed.TargetUserPconnTrafficNotEnable | The operation failed because of TargetUserPconnTrafficNotEnable. | The operation failed because the target user has not enabled outbound traffic. | |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | The traffic mirror source instance ID parameter contains duplicate values. | |
| 400 | ResourceNotFound.NetworkInterfaceId | The specified resource is not found. | The specified resource is not found. | |
| 400 | IncorrectStatus.NatIp | The status of %s [%s] is incorrect. | The status of NatIp is incorrect. | |
| 400 | UnsupportedFeature.PrivateLinkMode | The feature of %s is not supported. | The reverse access feature is not currently supported. | |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | Dependent resources exist. | |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of %s is not found. | The specified FullNatEntry is not found. | |
| 400 | IllegalParamFormat.NatIp | The param format of %s[%s] is illegal. | The format of the NAT IP address is invalid. | |
| 400 | IncorrectStatus.FullNatEntry | The status of %s [%s] is incorrect. | The current state of the FullNatEntry is invalid. | |
| 400 | QuotaExceeded.FullNatEntry | The quota of %s is exceeded, usage %s/%s. | The quota for FullNatEntry usage has been exceeded. | |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified resource of [%s] is not found. | The specified PhysicalConnection does not exist. | |
| 400 | IncorrectStatus.VbrId | The status of %s is incorrect. | The instance status of the VBR is invalid. | |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified PhysicalConnectionId [%s] is not found. | The specified PhysicalConnectionId is not found. | |
| 400 | IllegalParam.Bandwidth | The param of Bandwidth [%s] is illegal. | The specified bandwidth is invalid. | |
| 400 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the route to create conflicts with the client IP pool of the IPsec server. | The destination CIDR block of the route conflicts with the client CIDR block of the IPsec server. | |
| 400 | ResourceNotFound.PhysicalConnectionId | PhysicalConnection is not found. | The specified PhysicalConnectionId is not found. | |
| 400 | OperationDenied.VpnConfiguring | The associated VPN gateway is being configured. You cannot update the attributes of the customer gateway. | The configurations of the customer gateway cannot be modified because the associated VPN gateway is being configured. | |
| 400 | OperationDenied.VpnFinancialLocked | The associated VPN gateway is financially locked. You cannot update the attributes of the customer gateway. | The configurations of the customer gateway cannot be modified because the associated VPN gateway is locked due to an overdue payment. | |
| 400 | OperationDenied.MissingAsn | The autonomous system number of the customer gateway is mandatory when BGP authentication key is specified. | When a BGP authentication key is specified for a customer gateway, the autonomous system number must be specified. | |
| 400 | OperationDenied.AlreadyNewest | The operation is denied because the firmware version of the VPN gateway is already the latest. | The firmware version of the VPN gateway is already up to date and cannot be upgraded. | |
| 400 | InvalidAuthkey.Malformed | The specified BGP authentication key (%s) is malformed. | The BGP authentication key is invalid. | |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | The VPC cannot be deleted because it contains endpoints. Delete the endpoints in the VPC before you delete a VPC. | |
| 400 | Parameter.Illegal | The parameter is illegal. | The parameter is invalid. | |
| 400 | IllegalParam.IpAddress | The specified IP address (%s) is illegal. | The IP address is invalid. | |
| 400 | IllegalParam.CidrBlock | The param of (%s) is illegal. | The CIDR block is invalid. | |
| 400 | InvalidLoadBalancerId.NotFound | The specified resource of load balancer is not found. | The specified SLB instance does not exist. | |
| 400 | OperationFailed.AllocateUnfamiliarIp | The operation failed because only IP addresses used within the last seven days can be allocated. | The specified EIP application only allows you to apply for IP addresses that have been used within the last 7 days. | |
| 400 | OperationFailed.Ipv6GatewayInUse | The IPv6 gateway is in use. | The VPC attributes cannot be modified because the IPv6 gateway is still in use. | |
| 400 | InvalidRegionId.NotFound | The specified region is not found. | The specified region does not exist. | |
| 500 | SystemBusy | The system is busy. Please try again later. | The system is busy. Try again later. | |
| 400 | IncorrectStatus.VpcRouteEntry | The status of the specified routeEntry is invalid. | The VPC route entry is in an incorrect state. | |
| 400 | OperationFailed.IPv6Disabled | Operation failed because IPv6 is not enabled for the vSwitch. | The operation failed because the IPv6 feature is not enabled. | |
| 400 | OperationFailed.CenLevelNotSupport | When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP. | You cannot enable BGP for the VPN gateway if the VPC to which it belongs is attached to a Cloud Enterprise Network (CEN) instance and route synchronization is enabled. | |
| 400 | OperationDenied.OtherSubnetCreating | The operation is not allowed because a subnet is being created. | The specified operation is not allowed because other vSwitches are being created. | |
| 500 | OperationFailed.NormalInventoryNotEnough | Standard NAT gateways are no longer offered. You can create enhanced NAT gateways and set the correct natType. | The creation of standard NAT gateways is no longer supported. Create an enhanced NAT gateway and ensure that the NatType parameter is correctly configured. | |
| 400 | QuotaExceeded.VpnRouteEntry | The number of route entries to the VPN gateway in the VPC routing table has reached the quota limit. | The number of route entries that point to the VPN gateway in the VPC route table has reached the quota limit. | |
| 400 | IllegalParam.EgressAclEntryId | The specified EgressAclEntryId is invalid. | The outbound ACL rule ID is invalid. | |
| 400 | IllegalParam.IngressAclEntryId | The specified IngressAclEntryId is invalid. | The inbound ACL rule ID is invalid. | |
| 400 | InstanceNotExist.NATGWSchedule | The scheduled migration information of the NAT gateway does not exist. | The scheduled migration information for the NAT gateway does not exist. | |
| 400 | OperationFailed.QuotaExceedPerTimeWindow | The maximum number of scheduled migration within the specified time window is exceeded. | The operation failed because the number of scheduled migrations in the time window has reached the upper limit. | |
| 400 | InstanceExist.NatgwScheduledMigration | The scheduled migration information of the NAT gateway already exists. | The scheduled migration information for the NAT gateway already exists. | |
| 400 | InvalidPhoneNum.Malformed | The parameter PhoneNum is invalid. | The PhoneNum parameter is invalid. | |
| 400 | InvalidReservationTime.Malformed | The parameter ReservationTime is invalid. | The ReservationTime parameter is invalid. | |
| 400 | MissingParam.ScheduledMigrationParam | You must specify the parameters that are required for the scheduled migration. | Required parameters for the scheduled migration of the NAT gateway are missing. | |
| 400 | OperationUnsupported.NATGWBONDINGENI | Operation is unsupported because the specified network interface is created with enhanced NAT gateway. | The operation failed because the associated ENI was created by an enhanced NAT gateway. | |
| 400 | OperationFailed.NotSupportBizType | The specified instance type does not support the operation. | The operation failed because the specified instance type does not support this operation. | |
| 400 | OperationFailed.NatGwBandwidthQuotaExceed | The total bandwidth of the EIP bound to the NAT gateway exceeds the quota. | The operation failed because the total bandwidth of the EIPs associated with the NAT gateway exceeds the limit. | |
| 400 | IpInstanceId.ChargeType.NotSupport | You cannot add subscription EIP instance to the bandwidth package. | Subscription EIPs cannot be added to an Internet Shared Bandwidth instance. | |
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | The specified Internet Shared Bandwidth instance is locked due to overdue payments. You cannot add IP addresses to it. | |
| 400 | IpInstanceId.QuotaExceeded | The maximum number of EIP that you can add to the bandwidth package is exceeded. | The number of EIPs that can be added to the Internet Shared Bandwidth instance has reached the upper limit. | |
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | The EIP has been added to the Internet Shared Bandwidth instance too frequently. Try again later. | |
| 400 | IpInstanceId.InvalidIpInternetChargeType | You cannot add the hybrid cloud EIP to a pay by traffic bandwidth package. | EIPs in hybrid cloud mode cannot be added to a pay-by-data-transfer Internet Shared Bandwidth instance. | |
| 400 | TaskConflict | The operation is too frequent. Please try again later. | Operations are too frequent. Try again later. | |
| 400 | IncorrectStatus.Eip | An EIP status error occurred. | The EIP is in an incorrect state. | |
| 400 | OperationUnsupported.IpType | The EIP type does not support the operation. | The specified EIP type cannot be added. | |
| 400 | OperationFailed.DistibuteLock | The resource is locked and cannot be operated. | The resource is locked. The operation is not allowed. | |
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | EIPs in hybrid cloud mode cannot be added to an Internet Shared Bandwidth instance with low bandwidth. | |
| 400 | OperationFailed.IPsecServerExist | An IPsec server already exists in the VPN gateway. | An IPsec server already exists in the VPN gateway. | |
| 400 | VpnGateway.SslVpnDisabled | The VPN gateway has not enabled SSL VPN. | The SSL-VPN feature is not enabled for the VPN gateway. | |
| 400 | OperationUnsupported.IPsecServer | The current version of the VPN gateway does not support IPsec server. | The current VPN gateway version does not support the IPsec server. | |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | The specified next hop does not support IPv6. | |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | The IPv6 address of the specified next hop is being created or deleted. | |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | You are not allowed to create an IPv6 route that uses the primary ENI as the next hop. | |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | You cannot specify the private IP parameter when creating an IPv6 route. | |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | The elastic network interface controllers (NICs) on the attachment do not exist. | |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | No available elastic network interface controllers (NICs) exist on the attachment. | |
| 400 | InvalidAttachment.NotFound | The attachment is not found. | The attachment does not exist. | |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | Failed to query the attachment information. | |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | The attachment is invalid. | |
| 400 | OperationFailed.NormalInventoryNotEnough | Operation failed because the inventory of standard NAT gateway is insufficient. | The operation failed due to insufficient inventory of standard NAT gateways. | |
| 400 | OperationUnsupported.PrePaidPyByLcu | The operation failed because the subscription NAT gateway does not support the pay-by-LCU billing method. | Subscription NAT gateway instances do not support the pay-by-LCU billing method. | |
| 400 | OperationFailed.VswBindedRouteTable | The operation failed because a custom route table that contains subnet routes is associated with the specified VSwitch. | The operation failed because the vSwitch is associated with a subnet route table. | |
| 400 | OperationFailed.VswBindedAcl | The operation failed because a network ACL is associated with the specified VSwitch. | The operation failed because the specified vSwitch is associated with a network ACL. | |
| 400 | OperationUnsupported.SkipConstruction | You are not authorized to skip the construction. | You do not have permission to skip the construction phase and proceed to payment. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found. | No Express Connect circuit was found for the specified circuit ID. | |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in the Allocated state. | The specified PhysicalConnectionId is not in the Allocated state. | |
| 400 | MissingParam.AliUid | You must specify AliUid. | The AliUid parameter is missing. | |
| 400 | MissingParam.RegionNo | You must specify RegionNo. | The RegionNo parameter is missing. | |
| 400 | MissingParam.PhysicalConnectionId | You must specify PhysicalConnectionId. | The PhysicalConnectionId parameter is missing. | |
| 400 | MissingParam.Name | You must specify Name. | The instance name is missing. | |
| 400 | MissingParam.Description | You must specify Description. | The instance description is required. | |
| 400 | IncorrectStatus.NATGW | The status of the specified NAT gateway is abnormal. | The NAT gateway is in an abnormal state. | |
| 400 | OperationUnsupported.NotPConnOwner | Only the owner of the leased line can update the bandwidth. | You are not allowed to update the bandwidth if you are not the owner of the Express Connect circuit. | |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | The specified billing method is unavailable. | |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | The specified instance does not exist. | |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | The specified billing cycle is invalid. | |
| 400 | OperationUnsupported.NormalInventoryNotEnough | Operation is unsupported because the inventory of standard NAT gateway is insufficient. | The operation failed due to insufficient inventory of standard NAT gateways. | |
| 400 | OperationFailed.VswHasRouteTable | Operation failed because the specified VSwitch is associated with a route table. | The operation failed because the specified vSwitch is associated with a subnet route table. | |
| 400 | OperationFailed.VswHasAcl | Operation failed because the specified VSwitch is associated with a network ACL. | The operation failed because the specified vSwitch is associated with a network ACL. | |
| 400 | QuotaExceeded.VBRBandwidth | The VBR bandwidth must not exceed the physical connection bandwidth. | The bandwidth of the virtual border router (VBR) exceeds the limit of the Express Connect circuit bandwidth. | |
| 400 | MissingParam.Bandwidth | You must specify Bandwidth. | The bandwidth parameter is missing. | |
| 400 | MissingParam.InstanceId | You must specify InstanceId. | Missing param of InstanceId. | |
| 400 | InvalidInstanceId.NotFound | The InstanceId is not found. | The specified instance ID cannot be found. | |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | The specified bandwidth is invalid. | |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | The quota for virtual border router bandwidth is exceeded. | The VirtualBorderRouterBandwidth quota is exceeded. | |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | You cannot set the bandwidth of VBR with multiple physical connections. | Setting the bandwidth is not supported for VBRs with multiple physical connections. | |
| 400 | OperationUnsupported.ModifyBandwidth | You cannot modify the bandwidth of the VBR in sale. | You are not allowed to modify the bandwidth of a billed VBR. | |
| 400 | OperationUnsupported.RegionAndServiceLocationNotMatch | Operation is not supported because the region and service location do not match. | The operation is not supported in the specified region and service area. | |
| 400 | OperationFailed.EniTypeNotSupport | Operation failed because the ENI type is not supported. | The type of the secondary elastic network interface (ENI) does not support the current operation. | |
| 400 | OperationFailed.CanNotUseEipInDnat | Operation failed because the EIP cannot be used to create a forward entry. | The operation failed because the EIP cannot be used to create a DNAT entry. | |
| 400 | OperationUnsupported.EipNatGWCheck | Operation is not supported because the relation check of EIP and NAT gateway has failed. | Operation is not supported because the relation check of EIP and NAT gateway has failed. | |
| 400 | OperationUnsupported.VpcAttachedCen | Operation failed because the VPC is attached to CEN. | The operation failed because the VPC is attached to a CEN instance. | |
| 400 | OperationUnsupported.RouterInterfaceExist | Operation failed because the VPC has a router interface. | The operation failed because a router interface exists in the VPC. | |
| 400 | OperationFailed.VRouterNotExist | Operation failed because the VRouter does not exist. | The operation failed because the vRouter does not exist. | |
| 400 | OperationFailed.SnatQuotaExceed | Operation failed because the maximum number of SNAT entry is exceeded. | The operation failed because the number of SNAT entries exceeds the limit. | |
| 400 | OperationFailed.DnatQuotaExceed | Operation failed because the maximum number of forward entry is exceeded. | The operation failed because the number of DNAT entries exceeds the limit. | |
| 400 | OperationFailed.EnhancedUserIsUnAuthorized | Operation failed because the user is not authorized to create an enhanced NAT gateway. | The operation failed because the user is not authorized to create an enhanced NAT gateway. | |
| 400 | OperationFailed.EnhancedRegion | Operation failed because enhanced NAT gateways are not available for sale in the specified region. | The operation failed because enhanced NAT gateways are not available for purchase in the current region. | |
| 400 | OperationFailed.EnhancedQuotaExceed | Operation failed because the maximum number of enhanced NAT gateways in the same VPC is exceeded. | The operation failed because the number of enhanced NAT gateways in the current VPC exceeds the limit. | |
| 400 | InvalidBandwidthPackageIdNumber.NotSupported | The number of BandwidthPackageIds exceeds the limit. | The number of Internet Shared Bandwidth instances exceeds the quota limit. | |
| 400 | InvalidResourceGroupId | The specified ResourceGroupId does not exist. | The resource group ID does not exist. | |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroup is not supported in this region. | The resource group feature is not enabled. | |
| 400 | OrderError.EIP | The account failed to create an order. | Failed to place the order. | |
| 400 | OperationFailed.SnatIpsTooMany | The maximum number of IP addresses is exceeded in the SNAT pool. | The number of IP addresses in the SNAT pool exceeds the limit. | |
| 400 | IncorrectStatus.VSWITCH | The status of the specified VSwitch is invalid. | The status of the vSwitch is abnormal. | |
| 400 | OperationFailed.VswNotBelongToVpc | Operation failed because the specified VSwitch is not bound to the same VPC with NAT gateway. | The operation failed because the vSwitch and the NAT gateway do not belong to the same VPC. | |
| 400 | OperationFailed.VSwitchNoAvailableIp | Operation failed because the number of available IP addresses of the specified VSwitch is insufficient. | The operation failed because the number of active IP addresses in the vSwitch is insufficient. | |
| 400 | OperationFailed.VpnConnectionExist | Auto propagate cannot be closed when VPN connections with BGP enabled exist. | Automatic route propagation cannot be disabled when a VPN connection with BGP enabled exists. | |
| 400 | OperationUnsupported.EnhancedCURegion | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | |
| 400 | NoPermission.CreateServiceLinkedRole | You are not authorized to create service linked role. | You do not have the permissions to create a service-linked role. | |
| 400 | OperationUnsupported.EnhancedRegion | Enhanced NAT Gateway is not supported in this region. | Enhanced NAT Gateway is not supported in this region. | |
| 400 | MissingParam.NatGatewayId | You must specify NatGatewayId. | The NatGatewayId parameter is required. | |
| 400 | OperationFailed.RegionNotSupport | The specified region does not support the feature. | This feature is not supported in the current region. | |
| 400 | OperationFailed.NoPermission | You are not authorized to perform the operation. | You do not have the permissions to perform this operation. | |
| 400 | OperationFailed.NatGatewayNotExist | The specified NatGateway does not exist. | The operation failed because the NAT gateway does not exist. | |
| 400 | OperationFailed.NatTypeInvalid | Only enhanced NAT gateway supports the operation. | Only enhanced NAT gateways support this operation. | |
| 400 | OperationFailed.EcsMetricNotEnabled | The feature is not enabled for enhanced NAT gateway. | This feature is not enabled for the enhanced NAT gateway. | |
| 400 | MissingParam.TimePoint | You must specify TimePoint. | The TimePoint parameter is required. | |
| 400 | IllegalParam.OrderKey | The specified OrderKey is invalid. | The OrderKey parameter is invalid. | |
| 400 | IllegalParam.OrderType | The specified OrderType is invalid. | The OrderType parameter is invalid. | |
| 400 | IllegalParam.NextTokenExpired | The specified NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | IllegalParam.Mode | The specified Mode is invalid. | The Mode parameter is invalid. | |
| 400 | OrderError.EIP | Failed to place an order. | Failed to place the order. | |
| 400 | OperationFailed.VswNotExist | The specified VSwitch does not exist. | The specified vSwitch does not exist. | |
| 400 | OperationFailed.VpcNotExist | The specified VPC does not exist. | The specified VPC does not exist. | |
| 400 | OperationUnsupported.NatConvert | The NAT gateway conversion function is not supported. | The NAT gateway type conversion feature is not supported. | |
| 400 | OperationFailed.NatTypeNotEnhanced | Operation failed because the specified NAT gateway type is not enhanced. | The operation failed because the specified NAT gateway is not an enhanced NAT gateway. | |
| 400 | OperationFailed.NatGwBindWithBandwidthPackage | Operation failed because the NAT gateway is bound to bandwidth packages. | The operation failed because a NAT service plan is associated with the NAT gateway. | |
| 400 | IncorrectStatus.NatGateway | The status of NAT gateway is incorrect. | The NAT gateway is in an invalid state. | |
| 400 | OperationFailed.EipInMiddleStatus | Operation failed because the status of EIP associated with the specified NAT gateway is abnormal. | The operation failed because the EIP associated with the NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.SnatInMiddleStatus | Operation failed because the status of the SNAT entry of the specified NAT gateway is abnormal. | The operation failed because the SNAT entry of the specified NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.DnatInMiddleStatus | Operation failed because the status of the DNAT entry associated with the NAT gateway is abnormal. | The operation failed because the DNAT rule of the NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.NatGwRouteInMiddleStatus | Operation failed because the status of the route entry associated with the NAT gateway is abnormal. | The operation failed because the route entry associated with the NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.VSwitchNotInVpc | The specified VSwitch and NAT gateway must be in the same VPC. | The vSwitch and the NAT gateway must belong to the same VPC. | |
| 400 | OperationFailed.EnhancedInventoryNotEnough | The enhanced NAT gateway inventory is insufficient in the specified zone. | The inventory of enhanced NAT gateways in the current zone is insufficient. | |
| 400 | InvalidRouteEntryId.NotFound | The specified routeEntry does not exist. | The specified route entry does not exist. | |
| 400 | OperationFailed.QueryCenEntry | Operation is denied because getting CEN route entry has failed. | The query failed because Cloud Enterprise Network routes are temporarily unavailable. | |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to another VPN on the same network block. | A route pointing to another VPN gateway already exists for the same CIDR block in the VPC route table. | |
| 400 | IllegalParam.LocalSubnet | The specified "LocalSubnet" (%s) is invalid. | The local CIDR block (%s) is invalid. | |
| 400 | IllegalParam.RemoteSubnet | The specified "RemoteSubnet" (%s) is invalid. | The peer CIDR block (%s) is invalid. | |
| 400 | MissingParam.SecondaryCidrBlockOrIpv6CidrBlock | Either SecondaryCidrBlock or Ipv6CidrBlock must be specified. | The required parameter for the secondary CIDR block or the IPv6 CIDR block is missing. | |
| 400 | MissingParam.VpcId | You must specify VpcId. | The required parameter VpcId is missing. | |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | The VPC cannot be deleted because it contains DHCP options sets that have not been deleted. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist. | The specified region does not exist. Check whether the parameter is correct. | |
| 400 | OperationFailed.AttachmentNotExist | The current VPC is not attahced to a DHCP options set. | The DHCP options set cannot be replaced because no DHCP options set is associated with the VPC. | |
| 400 | IncorrectStatus.VpcDhcpOptionsSet | The dhcpOptionsSet status of VPC does not support this operation. | The operation is not allowed because the DHCP options set associated with the VPC is in a transitional state. | |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | The DHCP options set instance ID does not match the VPC. Check whether the mapping between the DHCP options set instance and the VPC is correct. | |
| 400 | TaskConflict | The operation is too frequent. Please wait a moment and try again. | The operation is too frequent. Try again later. | |
| 400 | InvalidDhcpOptionsSetId.NotFound | The specified dhcpOptionsSetId does not exist. | The DHCP options set does not exist. Check whether the parameter is correct. | |
| 400 | IncorrectStatus.DhcpOptionsSet | The DhcpOptionsSet status does not support this operation. | The operation is not allowed because the DHCP options set instance is in a transitional state. Wait until the instance status reaches a stable state and try again. | |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | Shared resources do not support this operation. | |
| 400 | OperationFailed.AttachmentExist | The current VPC is already attached to a DHCP options set. | The operation is not allowed because the VPC is already associated with a DHCP options set. | |
| 400 | QuotaExceeded.AttachVpcNumber | The maximum number of VPCs that can be attached to a DHCP options set is exceeded. | The number of VPCs that can be associated with a single DHCP options set has exceeded the quota. | |
| 400 | IllegalParam.DomainNameServers | The specified DomainNameServers is invalid. | The specified DomainNameServers parameter is invalid. Check whether the parameter is correct. | |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName parameter is invalid. Check whether the parameter is correct. | |
| 400 | IllegalParam.DhcpOptionsSetName | The specified DhcpOptionsSetName is invalid. | The specified DhcpOptionsSetName parameter is invalid. Check whether the parameter is correct. | |
| 400 | IllegalParam.DhcpOptionsSetDescription | The specified DhcpOptionsSetDescription is invalid. | The specified DhcpOptionsSetDescription parameter is invalid. Check whether the parameter is correct. | |
| 400 | OperationUnsupported.DhcpOptionsSet | The DHCP options set feature in this region is not supported. | The DHCP options set feature is not supported in the current region. | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | The DHCP options set cannot be deleted because it is associated with a VPC. | |
| 400 | InvalidDomainNameServers.Malformed | The specified format of DomainNameServers is invalid. | The format of the specified DomainNameServers parameter is invalid. Check whether the parameter is correct. | |
| 400 | QuotaExceeded.RegionDhcpOptionsSet | The quota of dhcpOptionsSet in the region is exceeded. | The number of DHCP options sets that you can create has exceeded the quota. | |
| 400 | QuotaExceeded.DomainNameServers | The maximum number of domain name servers cannot exceed 4. | The number of configured DomainNameServers exceeds 4. | |
| 400 | IllegalParam.Mode | The specified value of the parameter Mode is invalid. | The value of the Mode parameter is invalid. | |
| 400 | QuotaExceeded.PolicyBasedRoute | The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s. | The number of policy-based routes has reached the upper limit. The current count is %s, the requested count is %s, and the upper limit is %s. | |
| 400 | OperationUnsupported.CidrConflict | The specified CIDR block conflicts with an existing SNAT entry. | The specified CIDR block conflicts with an existing SNAT entry. | |
| 403 | Forbidden.OperationRecoverNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | The current account is not authorized to recover this Virtual Border Router. | |
| 403 | Forbidden.OperationDeleteNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | The current account is not authorized to delete this Virtual Border Router. | |
| 403 | Forbidden.OperationTerminateNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | The current account is not authorized to terminate this Virtual Border Router. | |
| 500 | VpnGateway.Configuring | The specified VPN gateway is being configured. | The VPN gateway is being configured. | |
| 0 | FUWU_BIZ_COMMODITY_VERIFY_FAIL | Your account status check has failed | The purchase failed because you have not completed identity verification, your account balance is insufficient, or you have exceeded the instance purchase limit. | |
| 0 | FUWU_BIZ_COMMODITY_VERIFY_FAIL | The purchased module is invalid. | ||
| 0 | OrderFailed | The order creation failed. | ||
| 0 | PAY.TAX_CALC_FAILED | The tax calculation failed. | ||
| 0 | PAY.CURRENCY_NOT_SUPPORTED | The account does not support this currency. | ||
| 0 | INVALID_COMPONENT | This instance type is not available for the account. | ||
| 0 | ARREARAGE | The specified account has an overdue payment. | ||
| 0 | PAY.INVALID_CREDIT_CARD | The specified credit card is invalid. | ||
| 0 | PAY.PAYMENT_PARAMETER_INVALID | The payment parameters are invalid. | ||
| 0 | IpInstanceId.BizStatusInvalid | The specified EIP is disabled. | ||
| 0 | IpInstanceId.AlreadyInBandwidthPackage | The specified EIP is already added to the Internet Shared Bandwidth instance. | ||
| 0 | PAY.PAY_ORDER_FAILED | The order payment failed. Please try again later. | ||
| 0 | DependencyViolation.Ips | The specified Internet Shared Bandwidth instance is already associated. | ||
| 0 | InvalidIpInstanceId.NotFound | The specified elastic IP address does not exist. | ||
| 0 | ORDER.PERIOD_INVALID | The purchase period is invalid. | ||
| 0 | QUANTITY_INVALID | The number of instances has exceeded the limit. | ||
| 0 | NATGATEWAY_FINANCIALLOCKED | The specified NAT gateway has expired. | ||
| 0 | PRODUCT.INSTANCE_TYPE_NOT_SUPPORTED | This instance type is not available for the account. | ||
| 0 | PAY.COUPON_NOT_MEET_CONSUMPTION_RULE | The specified coupon is invalid and cannot be used. | ||
| 0 | PAY.INVALID_AMOUNT | The payment amount is invalid. | ||
| 0 | PRODUCT.NOT_AVAILABLE_IZ | The specified zone is not supported. | ||
| 0 | PAY.INSUFFICIENT_BALANCE | The account balance is insufficient. | ||
| 0 | DependencyViolation.EIPS | The specified NAT gateway is already associated with an elastic IP address. | ||
| 0 | PRICE.INQUIRY_FAILED | The pricing query failed. | ||
| 0 | PAY.STORED_CARD_NOT_EXIST | The specified prepaid card does not exist. | ||
| 0 | BandwidthPackageId.InvalidBizStatus | The specified Internet Shared Bandwidth instance is locked due to an overdue payment. | ||
| 0 | ORDER.QUOTA_EXCEEDED | The purchase limit has been exceeded. | ||
| 0 | RISK.RISK_CONTROL_REJECTION | The account has been disabled by the risk control system. | ||
| 0 | PRODUCT.INSUFFICIENT_STOCK | The request failed due to insufficient resources. | ||
| 0 | INSTANCE_HAS_INACTIVE_CHANGE | The modification is being processed. | ||
| 0 | PAY.QUERY_QUOTA_BOOK_FAILED | The query for the user quota ledger failed. | ||
| 0 | ORDER.OPEND | The instance is already activated. | ||
| 0 | ORDER.NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | ||
| 0 | PRODUCT.INSTANCE_RELEASED | The specified instance has been released. | ||
| 0 | PAY.USER_DECLINED | The user disputed the payment. | ||
| 0 | NOCARD | The user has not linked a bank card. | ||
| 0 | PURCHASE.NO_VAILD_PURCHASE | The purchase is invalid. | ||
| 0 | InvalidParameter.Bandwidth | The specified bandwidth is invalid. | ||
| 0 | Forbidden.GlobalAccelerationInstanceChargeTypeIsPrepaid | The subscription Alibaba Cloud Global Accelerator (GA) instance cannot be released. | ||
| 0 | ORDER.ARREARAGE | The account balance is insufficient. | ||
| 0 | DependencyViolation.ip | The specified NAT gateway is already associated with an elastic IP address. | ||
| 0 | ORDER.NOT_ENOUGH_ACTIVITY_STOCK | Insufficient inventory for the activity. | ||
| 0 | PAY.CURRENCY_INCONSISTENCY | The currencies do not match. | ||
| 0 | PURCHASE.PURCHASE_QUERY_FAILED | The specified purchase record was not found. | ||
| 0 | EIP_BIND_NATGATEWAY | The specified elastic IP address is already associated with a NAT gateway. | ||
| 0 | QuotaExceeded.GlobalAccelerationInstance | The number of Global Accelerator (GA) instances exceeds the limit. | ||
| 0 | PRICE.PRICING_PLAN_NOT_FOUND | The specified pricing plan does not exist. | ||
| 0 | NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | ||
| 0 | COMMODITY.INVALID_COMPONENT | The specified instance component is invalid. Check whether the instance component is correct. | ||
| 0 | PAY.WITHHOLDING_AGREEMENT_ILLEGAL | The withholding tax agreement is invalid. | ||
| 0 | AUTH.RAM_AUTH_FAILED | Authentication failed for the RAM user. | ||
| 0 | EipOperation.TooFrequently | You are adding elastic IP addresses to the Internet Shared Bandwidth instance too frequently. Try again later. | ||
| 0 | IpInstanceId.ChargeType.NotSupport | The specified elastic IP address is a subscription instance. | ||
| 0 | PRICE.TAXING_ERROR | Tax calculation failed. | ||
| 0 | ORDER.ORDER_AMOUNT_ILLEGAL | The order amount is invalid. | ||
| 0 | ORDER.INSTANCE_HAS_INACTIVE_CHANGE | The modification is being processed. | ||
| 0 | PAY.GET_PAY_URL_ERROR | An error occurred while retrieving the top-up URL. | ||
| 0 | PAY.COUPON_NOT_EXIST | The voucher does not exist. | ||
| 0 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | No matching pricing plan was found for the instance. Submit a ticket for assistance. | ||
| 0 | BandwidthPackage.QuotaExceeded | The number of bandwidth plans has exceeded the limit. | ||
| 0 | IpInstanceId.NotBandwidthPackage | The specified elastic IP address is not in the Internet Shared Bandwidth instance. | ||
| 0 | PRODUCT.INSTANCE_TYPE_NOT_EXIST | The specified instance type does not exist. | ||
| 0 | PRICE.INVALID_INQUIRY_PARAMETER | The specified pricing query parameter is invalid. | ||
| 0 | ORDER.BID_USER_ ORDER_FORBIDDEN | This account cannot purchase spot instances. | ||
| 0 | ORDER.ACCOUNT_STATUS_ILLEGAL | The account status is invalid. | ||
| 0 | INSUFFICIENT_BALANCE | The account balance is insufficient. | ||
| 0 | ORDER.INST_HAS_UNPAID_ORDER | The account has unpaid orders. | ||
| 0 | IpInstanceId.QuotaExceeded | The number of IP addresses in the Internet Shared Bandwidth instance has exceeded the limit. | ||
| 0 | PAY.ACCOUNT_BOOK_NOT_EXIST | The specified ledger does not exist. | ||
| 0 | PAY.AMOUNT_LIMIT_EXCEEDED | The amount exceeds the limit. | ||
| 0 | PAY.NO_CREDIT_CARD | No credit card has been added to this account. | ||
| 0 | EIP_NOT_SUPPORT_SNAT_POOL | The specified elastic IP address cannot be added to the SNAT pool. | ||
| 0 | CreateOrderFailed | Failed to create the order. | ||
| 0 | PAY.REFUND_FAILED | The refund failed. | ||
| 0 | ORDER.INST_HAS_UNSETTLED_BILLS | The account has unpaid orders. | ||
| 400 | ORDER.QUANTITY_INVALID | User quota has exceeded the limit. | You have reached the maximum number of elastic IP addresses. Go to Quota Center to increase the quota. | |
| 0 | ORDER.SYS_CONSTRAINT_INVALID | The order failed system constraint validation. | ||
| 0 | QuotaExceeded.Bgp | bgp group count per vbr quota exceed. | The number of BGP groups for the Virtual Border Router has reached the quota limit. | |
| 0 | InvalidBackendServerId.NotInVPC | The specified BackendServerId is not in VPC. | The specified BackendServerId is not of the VPC type. | |
| 0 | MissingParameter.BandwidthPackage | only support one BandwidthPackage be created with NatGateway. | You must specify an Internet Shared Bandwidth plan. | |
| 0 | InvalidParameter | Specified value of "Bandwidth" is not valid. | The specified bandwidth is invalid. | |
| 400 | InvalidParameter | Specified value of InternetChargeType is not valid. | The value of the InternetChargeType parameter is invalid. | |
| 0 | InvalidFilterValue | The value of the filter is invalid. | ||
| 0 | InvalidBindingStatus | The eip binding status invalid. | The binding status of the EIP is incorrect. | |
| 0 | InvalidVlanId.Malformed | The specified VlanId is not valid. | The value of the VlanId parameter is invalid. | |
| 400 | InvalidDescription.Malformed | The specifid ?Description? is not valid. | The specified resource description format is invalid. The length must be 2 to 256 characters, and it cannot start with http:// or https://. | |
| 400 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | The VPC cannot be deleted because it contains undeleted cloud service instances. | |
| 0 | InvalidRegion.NotSupport | The specified region does not support. | The specified RegionId does not support this operation. | |
| 0 | InvalidBackendServerRegionId.NotFound | The specified BackendServerRegionId is not found. | The specified BackendServerRegionId does not exist. | |
| 0 | InvalidName.Malformd | The attribute name is illeagl. | The specified name format is invalid. | |
| 400 | IncorrectStatus | HaVip can be deleted only when status is Available or InUse. | The HAVIP cannot be deleted because its current status does not support this operation. | |
| 0 | QuotaExceeded.BgpNetwork | bgp network count per vbr quota exceed. | The number of Border Gateway Protocol (BGP) routing networks for the Virtual Border Router has reached the quota limit. | |
| 0 | InvalidCircuitCode.Malformed | circuitCode is illegal. | The specified CircuitCode is invalid. | |
| 0 | InvalidSnatTableId.NotFound | Specified SNAT table does not exist. | The specified SNAT table does not exist. Check whether the input parameters are correct. | |
| 0 | IncorrectStatus | Vswtich status not stable. | The current status of the vSwitch is Pending or Modifying. Try again later. | |
| 0 | IncorrectStatus | This openeration would be allowed only when status of this RouterInterface is Idle/Inactive. | The operation cannot be performed. You can perform this operation only when the router interface is in the Idle or Inactive state. | |
| 400 | IncorrectStatus | HaVip can be deleted only when it is status is Available. | The HAVIP cannot be deleted. You can delete a HAVIP only when it is in the Available state. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when it's status is Active. | You can perform this operation only when the router interface is in the Active state. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when it’s status is Idle. | You can perform this operation only when the router interface is in the Idle state. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when it's status is Inactive. | You can perform this operation only when the router interface is in the Inactive state. | |
| 400 | Forbidden.FinancialLocked | The instance is locked due to outstanding payments. | The instance is locked due to an overdue payment and cannot be operated. | |
| 400 | QuotaExceeded.Bgp | bgp peer count per vbr quota exceed. | The number of BGP peers for the Virtual Border Router has reached the quota limit. | |
| 0 | Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You do not have the permissions to manage this resource. Apply for the required permissions and try again. | |
| 0 | Forbidden.OnlyOneConnection | The Specified routers have a connection already | A router interface is already connected to the router. | |
| 0 | QuotaExceeded.freePconnPerAP | free physical connections count excceeded. | The quota for Express Connect circuits has been exceeded. | |
| 0 | InvalidRouterType.ValueNotSupported | The specified RouterType is not valid | The specified router type is invalid. | |
| 404 | InvalidCustomerGatewayInstanceId.NotFound | The specified customer gateway instance id does not exist. | The specified customer gateway instance does not exist. Check whether the customer gateway instance ID is correct. | |
| 0 | InvalidIPAddress.AlreadyUsed | The specified IPAddress is already used by other resource. | The IP address is already in use. | |
| 0 | IncorrectGlobalAccelerationInstanceIdStatus | Current GlobalAccelerationInstance status does not support this operation. | The instance status of the specified Alibaba Cloud Global Accelerator (GA) does not support this operation. | |
| 0 | EIP_UNDERSTOCK | There are not enough eip in stock | The inventory of EIPs is insufficient. | |
| 0 | InvalidExternalIp.NotFound | Specified External Ip address does not found on the VRouter | The specified public IP address does not exist. | |
| 0 | Forbidden.VbrAttached | cannot terminate physical connection when virtual border routers are still attached. | The Express Connect circuit connection cannot be terminated because it has associated Virtual Border Routers. | |
| 400 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackageId does not exist in our records. | The specified bandwidth plan ID does not exist. | |
| 0 | InvalidVbrId.NotFound | The specified VirutalBorderRouter does not exist in our records. | The Virtual Border Router does not exist. Check whether the specified Virtual Border Router is correct. | |
| 0 | DependencyViolation.RouteInterface | Specified object has dependent route interface . | The specified vSwitch is connected to a routing interface and cannot be deleted. | |
| 0 | InvalidVRouterName.Malformed | Specified virtual router name is not valid. | The format of the router name is invalid. | |
| 0 | RI_CREATE_ONE_LIMIT_BY_SYNC | Create ri only one limit by sync. | Synchronous creation of router interfaces is restricted. | |
| 0 | InvalidParams.NotNull | invalid peer asn cannot equals aliyun asn:45104 | The ASN cannot be the same as the Alibaba Cloud ASN. | |
| 0 | Forbidden.SnapshotNotFound | The specified Snapshot is not found | The specified snapshot does not exist. | |
| 0 | InvalidRouterInterfaceChargeType.Malformed | The prepaid routerinterface can not delete. | You cannot delete a subscription router interface. | |
| 0 | LimitationExceed.InterfaceNumberOnRouter | Total number of RouterInterfaces on a Router exceeded. | The number of router interfaces has reached the quota limit. | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | The Internet Shared Bandwidth plan contains undeleted SNAT or DNAT entries. Delete the SNAT or DNAT entries before you perform this operation. | |
| 0 | TaskConflict.AssociateGlobalAccelerationInstance | Operate too frequent. | The operation is too frequent. | |
| 0 | Forbidden.BillsOutstanding | You cannot use this action because you have bills outstanding. | You cannot perform this operation because you have unsettled bills. | |
| 0 | MissingParameter | The input parameter OwnerId | A required parameter is not specified. | |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | The VPC contains undeleted vSwitches and the deletion of the VPC failed. Delete the vSwitches in the VPC before you try to delete the VPC. | |
| 0 | InvalidPhysicalConnectionId.NotFound | The PhysicalConnectionId provided does not exist in our records. | The Express Connect circuit does not exist. | |
| 0 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId does not belong to user. | The Express Connect circuit does not belong to your account. | |
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | The VPC does not exist. Check whether the specified VPC is correct. | |
| 400 | InvalidOppositeRouterType.ValueNotSupported | The specified OppositeRouterType is not valid. | The value of the OppositeRouterType parameter is invalid. | |
| 400 | QuotaExceeded | Forward entry quota exceeded in this route table. | The number of custom route entries in a single route table cannot exceed 200. You can apply for a quota increase on the Quota Management page. | |
| 0 | IncorrectInstanceStatus | ECS instance can be operated by this action only when it's status is Running or Stopped. | You can perform this operation only when the ECS instance is in the Running or Stopped state. | |
| 400 | InvalidCirdrBlock.MaskLength | Specified CIDR block is not valid . | The format of the CIDR block is invalid. | |
| 0 | ResourceNotAssociated | The HaVip and ECS instance are not associated. | The HaVip is not associated with an ECS instance. | |
| 0 | Forbidden.BillsOutstanding | You cannot create more RouterInterface because you have bills outstanding. | You cannot create a router interface because you have unsettled bills. | |
| 404 | InvalidVpnConnectionInstanceId.NotFound | The specified vpn connection instance id does not exist. | The specified VPN connection does not exist. Check whether the VPN connection ID is correct. | |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | The specified RegionId does not exist. Check whether the parameter is correct. | |
| 0 | InvalidRegionId.NotFound | The specified region ID is incorrect. | ||
| 0 | InvalidRegionId.NotFound | The parameter wrong | The parameter value is invalid. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist in our records. | The specified RegionId does not exist. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId is not found. | The specified RegionId does not exist. Check whether the service is available in this region. | |
| 0 | InvalidRegionId.NotFound | Specified value of "regionId" is not supported. | The specified RegionId does not exist. Check whether the service is available in this region. | |
| 0 | InvalidRegionId.NotFound | The specified region not found. | The specified RegionId does not exist. Check whether the service is available in this region. | |
| 0 | InvalidName | The name is not valid | The specified name format is invalid. | |
| 0 | InvalidVpcId.NotFound | Specified VPC does not exist. | The VPC does not exist. | |
| 0 | ForbiddenAction | The user dose not supported this action. | You do not have permission to perform this operation. | |
| 0 | EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | The number of associated Virtual Border Routers has reached the quota limit. | |
| 0 | InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | The end time is invalid. | |
| 0 | DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | You cannot delete the HaVip because it is associated with an EIP. | |
| 0 | InvalidAccessPoint.NotExist | The accessPoint not exit | The access point does not exist. | |
| 0 | InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our record. | The specified router interface does not exist. Check whether the router interface is correct. | |
| 0 | Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to specify the CircuitCode parameter. | You cannot specify the CircuitCode parameter. | |
| 0 | InvalidStartTime.Malformed | Specified start time is malformed. | The start time is invalid. | |
| 0 | Forbedden.NotSupportRAM | This action does not support accessed by RAM mode. | This operation is not supported for a Resource Access Management (RAM) user. | |
| 0 | InsufficientEipCapacity | Insufficient EIP capacity to fulfill your request. | The EIP quota is insufficient. | |
| 400 | InternalError | The request processing has failed due to some unknown error. | The request processing failed due to an unknown error. | |
| 404 | InvalidFilterKey.ValueNotSupported | Specified filter key is not supported: Filter.X.key | The filter key is not supported: Filter.X.key. | |
| 0 | InvalidParameter.Description.Malformed | The specified Description is not valid. | The description is invalid. | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | The HaVip instance quota has been exceeded. | |
| 0 | InvalidType.Malformd | The Type provided was invalid. | The value of the Type parameter is invalid. | |
| 400 | InvalidParams.NotFound | vpc instance not found | The VPC does not exist. Check whether the specified VPC is correct. | |
| 0 | InvalidRemovedIpAddresses.NotFound | Some of remove ip is not natPublicIp. | One or more of the IP addresses to be removed are not public IP addresses of the NAT gateway. | |
| 0 | Forbindden | The specified Instance already bind eip | The instance is already attached to an EIP. Detach the EIP from the ECS instance before you add the port forwarding rule. | |
| 400 | InvalidParams.AlreadyExists | bgp network already exists | Border Gateway Protocol (BGP) networks already exist. | |
| 0 | InvalidInternalPort.Malformed | The specified InternalPort is not a valid port. | The private port is invalid. | |
| 0 | InvalidParams.NotNull | parameter must not null. | The parameter cannot be empty. | |
| 0 | Forbidden.LocalGatewayIpNotAllowedByCaller | The caller is not allowed to specify the LocalGatewayIp parameter. | The LocalGatewayIp parameter cannot be specified. | |
| 0 | InvalidCidrBlock | Specified CIDR block is already exists. | The vSwitch CIDR block overlaps with the CIDR block of another vSwitch or the destination CIDR block of an existing custom route. Use an available CIDR block. | |
| 0 | Forbidden.InternalIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The private IP address is not within the CIDR block of the VPC. | |
| 0 | InvalidCircuitCode.Malformed | The specified CircuitCode is not valid. | The specified CircuitCode is invalid. | |
| 0 | NATGW_MODIFY_SPEC_SAME | The specified Spec is same with now. | The specified specification is the same as the current specification. | |
| 0 | InvalidParams.PeerIpAddressInUse | peer ip address in use | The peer IP address is already in use. | |
| 0 | InvalidVlanId.Used | The specified VlanId has been used. | The VLAN is already in use. | |
| 0 | INVALID_WEIGHT_PARAM | Specified value of weight invalid | The weight is invalid. | |
| 0 | InternalError | The request processing has failed due to some unknown error | The request processing failed due to an unknown error. | |
| 0 | UnknownError | The request processing has failed due to some unknown error. | An unknown error occurred. Try again later. If the error persists, submit a ticket. | |
| 0 | IncorrectInstanceStatus | Current instance status does not support this operation. | The current state of the instance does not support this operation. | |
| 0 | IncorrectInstanceStatus | ECS instance can be operated by this action only when it’s status is Running or Stopped. | You can perform this operation only when the ECS instance is in the Running or Stopped state. | |
| 0 | IncorrectInstanceStatus | The current status of the resource does not support this operation. | The current state of the resource does not support this operation. | |
| 0 | InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | The next hop type and the next hop list cannot both be empty. | |
| 0 | IncorrectInstanceStatus | The current status of instance does not support this operation. | The current state of the instance does not support this operation. | |
| 0 | ForbiddenRelease | Forbidden to release a prepaid instance within validity period | You cannot release a subscription instance during the contract period. | |
| 0 | OperationFailed.VlanIdAlreadyInUse | The specifed vlanId has been used. | The VLAN is already in use. | |
| 400 | QuotaExceeded.VSwitch | Virtual switch quota exceeded. | The number of vSwitches has reached the quota limit. Reduce the number of vSwitches and try again. | |
| 0 | CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | The HAVIP quota for the specified VPC is exceeded. | |
| 0 | OperationDenied | The user cannot allow to create natgw | System-generated routes cannot be deleted. | |
| 0 | InvalidPhysicalConnectionId.NotEnabled | The specified PhysicalConnectionId is not in Enabled state. | The Express Connect circuit is not in a normal state. Check the Express Connect circuit and try again. | |
| 0 | InvalidRedundantPhysicalConnectionStatus | invalid redundant physical connection status. | The state of the redundant Express Connect circuit is invalid. | |
| 0 | InvalidVpcName.Malformed | Specified VPC name is not valid. | The format of the virtual private cloud (VPC) name is invalid. Correct the VPC format and try again. | |
| 0 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif | The VBR must have at least one sub-interface to create a BGP peer. | |
| 0 | InvalidStatus.CannotOperate | invalid status cannot operate | The operation cannot be performed because the current state is invalid. | |
| 0 | InvalidBandwidth.ValueNotSupported | The specified value of Bandwidth not supported. | The specified peak bandwidth is not supported. | |
| 0 | InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | The value of the Period parameter is invalid. | |
| 0 | ParameterMismatch.Role-Spec | The specified Spec and Role mismatch. | The specification and role of the router interface do not match. | |
| 0 | DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | Undeleted NAT service plans exist on the NAT gateway. Delete all NAT service plans associated with the NAT gateway and try again. | |
| 400 | InvalidIpAddress.AlreadyExist | Specified IpAddress is already exist. | The IP address already exists. IP addresses must be unique for each user within the same region. | |
| 0 | InsufficientBalance | Your account does not have enough balance. | Your account balance is insufficient. Top up your account and try again. | |
| 0 | InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | Both the next hop type and the next hop list are empty. | |
| 0 | InvalidVbrId.NotFound | The specified VirutalBorderRouter or PhysicalConnection does not exist in our records. | The specified Virtual Border Router or Express Connect circuit does not exist. | |
| 0 | InvalidVbrId.NotFound | The specified VirutalBorderRouter is not found. | The Virtual Border Router does not exist. Check whether the specified Virtual Border Router is correct. | |
| 0 | InvalidAccessPointId.NotFound | The AccessPointId provided does not exist in our records. | The specified access point ID does not exist. | |
| 0 | PHYSICAL_NOT_ALLOW_ASSOCIATE_VBR | The specified operation not allow. | The operation cannot be performed because the Express Connect circuit has associated virtual border routers. | |
| 0 | IncorretSnatEntryStatus | The Specified SnatEntry is not stable status | The status of the SNAT entry is unstable. | |
| 0 | DependencyViolation | Some route entry status blocked this operation. | The operation cannot be performed because the current route table contains routes in the pending or modifying state. | |
| 0 | InvalidForwardTableId.NotFound | Specified forwardTableId does not exist | The specified DNAT table does not exist. Check whether the input parameters are correct. | |
| 0 | RouterEntryConflict.Duplicated | A route entry already exists | The specified route already exists. | |
| 0 | Forbidden.UnassociateMaster | Unassociating a master instance is not allowed unless the parameter Force is True. | The master instance cannot be disassociated unless the operation is forced. | |
| 0 | InvalidBackendServerId.NotFound | The specified BackendServerId is not found. | The backend server instance does not exist. Check whether the backend server instance is correct. | |
| 0 | InvalidAccessPoint.NotMatch | The accessPoint id is not matched | The access point ID is invalid. | |
| 0 | InvalidVbrOwnerId.NotFound | The specified VbrOwnerId is not valid. | The value of the VbrOwnerId parameter is invalid. | |
| 0 | MissingParameter | Required parameters are missing. Check whether all required parameters are specified and try again. | ||
| 0 | MissingParameter | Miss mandatory parameter. | Required parameters are missing. Check whether all required parameters are specified and try again. | |
| 0 | MissingParameter | LocalGatewayIp | The LocalGatewayIp parameter is required. | |
| 0 | MissingParameter | The input parameter 'PeeringSubnetMask' that is mandatory for processing this request is not supplied. | The PeeringSubnetMask parameter is required. | |
| 0 | MissingParameter | The input parameter 'PeerGatewayIp' that is mandatory for processing this request is not supplied. | The PeerGatewayIp parameter is required. | |
| 0 | MissingParameter | The input parameter 'LocalGatewayIp' that is mandatory for processing this request is not supplied. | The LocalGatewayIp parameter is required. | |
| 0 | MissingParameter | The input parameter 'VlanId' that is mandatory for processing this request is not supplied. | The VlanId parameter is required. | |
| 0 | MissingParameter | The input parameter 'PhysicalConnectionId' that is mandatory for processing this request is not supplied. | The PhysicalConnectionId parameter is required. | |
| 0 | MissingParameter | The input parameter is mandatory for processing this request is not supplied. | Required parameters are missing. Check whether all required parameters are specified and try again. | |
| 0 | InvalidStatus | invalid physical connection status. | The status of the Express Connect circuit is invalid. | |
| 0 | InvalidZoneId.NotFound | Can not find ZoneId for allocated ip. | The zone of the IP address is invalid. | |
| 0 | OperationDenied.TooManyDataQueried | Specified operation is denied as too many data to return. | The query returns too much data at a time. | |
| 0 | InvalidZoneId.NotFound | Specified zone does not exist. | The zone ID is invalid. | |
| 0 | ROUTER_INTERFACE_REFERED_BY_ROUTEENTRY | The specified VlanInterface has been used by routeEntry. | The VLAN interface is already used in a route. | |
| 0 | PARAMETER_MUST_NOT_NULL | The specified physical connection id or vbrId must not be null. | The vbrId and physicalconnectionId parameters are required. | |
| 0 | Forbidden.RiskControl | This operation is forbidden by Aliyun RiskControl system. | The operation is blocked by the risk governance system. | |
| 0 | DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | The IP address is referenced by port forwarding rules. Delete the corresponding rules and try again. | |
| 0 | InvalidForwardTableId.NotFound | Specified forward table does not exist. | The specified DNAT table does not exist. Check whether the input parameters are correct. | |
| 0 | InvalidUserCidr.Quota | Specified UserCidr number is greater than 3. | The UserCidr quota limit has been reached. | |
| 0 | Forbidden.DestnationIpOutOfVpcCIDR | The specified Destination Ip is Out of VPC CIDR. | The private IP address is not within the CIDR block of the VPC. Specify a private IP address within the VPC CIDR block. | |
| 0 | InvalidRouteEntry.Duplicate | The route entry already exist. | The specified route already exists. | |
| 0 | InvalidRouteEntry.NotFound | Route entry not exists. | The route does not exist. Check whether the route is correct. | |
| 0 | ParamsInvalid | The request parameters are invalid. | ||
| 0 | Forbidden.NotAllowedInState | The request does not allow in this state. | The request cannot be executed in the current state. | |
| 0 | InvalidPeerIpAddress | multi pconn peer ip can not be null. | The IP addresses of multiple Express Connect circuits cannot be empty. | |
| 400 | QuotaExceeded.BandwidthPackageIps | The specified ipCount exceeded quota. | The number of IP addresses has exceeded the upper limit. You can apply for a quota increase on the Quota Management page. | |
| 400 | QuotaExceeded.Vpc | VPC quota exceeded. | The number of VPCs under the user account has reached the quota limit. | |
| 0 | InvalidInstanceOwner.Error | The router instance owener error. | The vRouter does not belong to your account. | |
| 0 | InvalidStatus.NotAllowed | Invalid virtual border router status. | The current status of the virtual border router does not support this operation. | |
| 0 | InvalidVpnConnection.AlreadyExists | Vpn connection already exists. | The VPN connection already exists. Do not add it again. | |
| 0 | Forbidden.AssociateToVBR | The physical connection still associate to VBR. | The Express Connect circuit is already associated with a Virtual Border Router. | |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | The vSwitch is in the Pending state and cannot be deleted. | |
| 0 | InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | The route entry does not match the local video gateway VIP of the router interface. | |
| 0 | InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other entry. | The vSwitch CIDR block overlaps with the CIDR block of another vSwitch or the destination CIDR block of an existing custom route. Use an available CIDR block. | |
| 0 | QuotaExceeded.Nqa | nqa count per vbr quota exceed. | The number of NQA tasks exceeds the VBR quota. | |
| 0 | InvalidDescription.Malformed | The specifid "Description" is not valid. | The specified resource description format is invalid. The length must be 2 to 256 characters, and it cannot start with http:// or https://. | |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | The specified name is invalid. | |
| 0 | InvalidDescription.Malformed | The specifid ‘Description’ is not valid. | The description format is invalid. | |
| 400 | InvalidDescription.Malformed | The Description is illeagl. | The specified resource description format is invalid. The length must be 2 to 256 characters, and it cannot start with http:// or https://. | |
| 0 | InvalidParameter | The specified parameter is not valid | The parameter value is invalid. | |
| 0 | InvalidParameter | Specified value of "Period" is not valid | The value of the Period parameter is invalid. | |
| 0 | InvalidParameter | The specified parameter is not valid. | The parameter value is invalid. | |
| 0 | InvalidParameter | Specified UserCidr invalid format. | The format of the customer-side CIDR block is incorrect. | |
| 0 | InvalidParameter | Specified UserCidr Subnet mask is not valid . | The subnet mask of the customer-side CIDR block is invalid. | |
| 0 | InvalidParameter | Specified value of "Bandwidth" is not supported. | The specified bandwidth is invalid. | |
| 0 | InvalidParameter | Specified CIDR block is not valid in VPC. | The CIDR block is not within the VPC CIDR block. | |
| 0 | InvalidParameter | Specified CIDR block is not valid | The CIDR block is invalid. | |
| 0 | QuotaExceeded.vbrPerpConn | Virtual boarder router per PhysicalConnection quota exceed. | The maximum quota of Virtual Border Routers per Express Connect circuit has been exceeded. Reduce the number of Virtual Border Routers on the Express Connect circuit and try again. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId is not found. | The specified Express Connect circuit ID does not exist. | |
| 400 | NATGW_NOT_EXIST | The specified NAT gateway does not exist. | The specified NAT gateway does not exist. | |
| 0 | InvalidGlobalAccelerationInstanceId.NotFound | The specified GlobalAccelerationInstanceId is not found. | The specified Alibaba Cloud Global Accelerator (GA) instance does not exist. | |
| 409 | OperationConflict | Request was denied due to conflict with a previos request. | A request conflict occurred. Try again later. | |
| 0 | InvalidLockReason.NotFound | The specified LockReason is not found | The lock reason is not found. | |
| 0 | BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | The bandwidth plan is locked due to an overdue payment. | |
| 0 | Forbidden.MultiVlanRi | Multiple vlan router interfaces are found. | Multiple VLAN router interfaces exist. | |
| 0 | InvalidForwardEntryId.NotFound | Specified forward entry ID does not exist | The specified DNAT entry does not exist. | |
| 0 | InvalidName.Malformed | The specified ?Name? is not valid. | The specified name format is invalid. | |
| 0 | InvalidSnatEntryId.NotFound | Specified Snat entry ID does not exist | The specified SNAT entry does not exist. Check whether the SNAT entry is correct. | |
| 0 | Forbidden.VlanIdNotAllowedByCaller | The caller is not allowed to specify the VlanId. | You are not allowed to specify a VLAN ID. | |
| 0 | Forbidden.SourceVSwitchId.Duplicated | The specified SourceCIDRis duplicated. | SNAT rules are already configured for the vSwitch. Do not configure them again. | |
| 0 | InvalidVPCStatus | vpc incorrect status. | The VPC status is invalid. Check whether the specified VPC status is correct. | |
| 0 | InvalidRouteEntry | Specified routeEntry not exist. | The specified route does not exist. | |
| 0 | InvalidSnatIp.Malformed | The specified SnatIp is not a valid IP address. | The public IP address is invalid. | |
| 0 | InvalidStatus.StatusNotEnabled | The physical connection status is invalid. | The current status of the Express Connect circuit does not support this operation. Check the status of the Express Connect circuit. | |
| 0 | Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | An error occurred while checking the route entry quota. | |
| 0 | UnsupportedParameter | The parameter is invalid. | ||
| 0 | IncorrectVpcStatus | Current VPC status does not support this operation. | The current status of the VPC does not support this operation. | |
| 0 | LinkRole.NotSupport | This linkrole is not supported | This link is not supported. | |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | The VPC cannot be deleted because custom routes exist in the VPC. | |
| 0 | Throttling | Request was denied due to request throttling. | The traffic for this period has exceeded the limit. If the current limit cannot meet your business requirements, submit a ticket to apply for an increase. | |
| 0 | InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | The status of the Express Connect circuit is invalid. | |
| 404 | InvalidAllocationId.NotFound | Specified allocation ID is not found | The specified public IP address does not exist. Check whether the parameter is correct. | |
| 0 | InvalidAllocationId.NotFound | Specified allocation ID is not found.. | The specified public IP address does not exist. Check whether the public IP address is correct. | |
| 0 | InvalidRedundantPhysicalConnection | redundant physical connection doesn't belong to current user. | The redundant Express Connect circuit does not belong to your account. | |
| 0 | Forbidden.OnlyOneConnection | Cannot connect concurrently between same routers | A connection cannot be initiated on the same vRouter. | |
| 0 | InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | The quota rule for route entries does not exist. | |
| 0 | DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | The high-availability virtual IP address (HaVip) used as the next hop of a route entry cannot be deleted. Delete the route entry that points to the HaVip before you delete the HaVip. | |
| 400 | PHYSICAL_NOT_ASSOCIATE_TO_VBR | The specified PhysicalConnection have not associate to the vbr. | No Virtual Border Router is created for the Express Connect circuit. | |
| 400 | InvalidUserCidr.Malformed | Specified UserCidr overlapping in of 100.64.0.0/10. | The specified UserCidr overlaps with 100.64.0.0/10. | |
| 0 | InvalidOperation.RouterInterfaceNotDeleted | The specified VirutalBorderRouter still has routerInterface. | The Virtual Border Router has associated router interfaces. | |
| 0 | IncorretRouteEntryStatus | You cannot create a route entry when any route entry or vSwitch in the route table of the same VPC is in an intermediate state, such as Adding, Modifying, or Deleting. | ||
| 0 | InvalidPhysicalConnectionId.NotMatched | instance id not matched. | The instance IDs do not match. | |
| 400 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | You cannot enable ClassicLink for the VPC because it is already enabled. | |
| 0 | ReserveIpFail | Reserve eip failed. | Failed to reserve the EIP. | |
| 0 | VpnGateway.Configuring | The specified service is configuring. | The service is being configured. Please try again later. | |
| 0 | InvalidAccessPoint.ValueNotAllowed | The non-vbr opposite router interface cannot have opposite access point configured. | Access points cannot be configured for router interfaces that are not Virtual Border Routers. | |
| 0 | InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist in our records. | The specified NatGatewayId does not exist. Check whether the NatGatewayId is correct. | |
| 0 | FUWU_BIZ_COMMODITY_VERIFY_FAIL | 你购买的模块非法 | The purchased module is invalid. | |
| 0 | InvalidPeerGatewayIp.Malformed | The specified PeerGatewayIp is not valid. | The value of the PeerGatewayIp parameter is invalid. | |
| 0 | InvalidAllocationId.NotFound | Specified allocation id is not found. | The specified public IP address does not exist. Check whether the public IP address is correct. | |
| 0 | BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | An operation conflict occurred on the Internet Shared Bandwidth instance. | |
| 0 | MCMS_VBR_EMPTY | Specified region have no vbr. | No Virtual Border Router exists in the specified region. Check whether the region is correct and try another region. | |
| 0 | InvalidPeerAsn.Malformed | invalid peer asn cannot equals aliyun asn:45104 | The ASN cannot be the same as the Alibaba Cloud ASN. | |
| 0 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalide | The specified parameters for modifying the router interface are invalid. | |
| 0 | Forbidden.VBRExists | vbr owner's vbr still exists. | The Virtual Border Router still exists. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | The operation to delete a VPC failed because it contains security groups that are not deleted. Delete the security groups in the VPC before you delete a VPC. | |
| 0 | Forbidden.Already.Bounded | The specified instance already bounded | The instance is already associated. Do not associate it again. | |
| 0 | CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | The maximum number of Alibaba Cloud Global Accelerator (GA) instances that you can attach to a single backend service instance has been reached. | |
| 0 | Forbidden.ImageNotFound | The specified Image is not found | The image does not exist. | |
| 0 | InvalidZoneId.NotFound | Specified value of ZoneId is not exists. | The zone does not exist. | |
| 0 | QuotaExceeded.BandwidthPackageCountOnNatGateway | BandwidthPackage count limit on one NatGateway exceeded. | The maximum number of Internet Shared Bandwidth instances has been exceeded. A NAT gateway supports up to four Internet Shared Bandwidth instances. | |
| 0 | InvalidExternalPort.Malformed | The specified ExternalPort is not a valid port. | The public port is invalid. | |
| 0 | IncorretForwardEntryStatus | The Specified forwardEntry is not exist | The specified DNAT entry does not exist. | |
| 0 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId is wrong. Maybe the RouterInterface or Router does not exist | The value of OppositeRouterInterface is incorrect based on the settings of OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId. The vRouter or router interface may not exist. | |
| 0 | IncorretForwardEntryStatus | The Specified forwardEntry is not stable status | The DNAT entry is in an unstable state. | |
| 0 | InvalidParameter.Name.Malformed | The specified Name is not valid. | The name is invalid. Specify a name in the correct format. | |
| 0 | Forbbiden | Specified RouteEntry cannot allowed delete by openApi. | You are not allowed to delete the route entry by calling API operations. | |
| 0 | Forbbiden | Active custom route in vpc. | You must add a custom route entry to the VPC. | |
| 0 | Forbbiden | The Router instance owener error | The specified router does not belong to your account. | |
| 0 | Forbbiden | The eip instance owener error | The EIP does not belong to the current caller. Check whether you have permissions to manage the EIP. | |
| 0 | InvalidEndTime.Malformed | Specified end time is malformed. | The end time is invalid. | |
| 0 | InvalidParameter.BandwidthPackage.n.ISP.ValueNotSupport | The specified ISP of BandwidthPackage is not valid. | The ISP of the Internet Shared Bandwidth instance is invalid. | |
| 0 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach it?s limit. | The quota for SNAT entries has been reached. | |
| 0 | InvalidAssociation.Duplicated | Specified instance already is associated. | The instance is already attached to an EIP or an Alibaba Cloud Global Accelerator (GA) and cannot be attached to another one. To change the EIP or Alibaba Cloud Global Accelerator (GA) attached to the instance, detach the current one first. | |
| 0 | InvalidIpCount.ValueNotSupported | Can not remove all ips of the bandwidthPackage. | You cannot remove all IP addresses from the Internet Shared Bandwidth instance. | |
| 0 | InvalidRegionPair.NotReachable | The specified OppositeRegion is not reachable by ExpressConnect from that region specified by "RegionId" | The specified region ID is incorrect. | |
| 0 | Forbidden.RegionNotFound | Specified region is not found during access authentication. | The specified region does not exist. Check whether the region ID is correct. | |
| 400 | InvalidVSwitchName.Malformed | Specified virtual switch name is not valid. | The format of the vSwitch name is invalid. Check whether the vSwitch name format is correct. | |
| 0 | AllocateIpFailed | Alloc bandwidthPackage ips failed | Failed to allocate a public IP address to the Internet Shared Bandwidth instance. | |
| 0 | IncorretSnatEntryStatus | Some Snat entry status blocked this operation.. | The operation cannot be performed because one or more SNAT entries in the SNAT table are in the Pending or Modifying state. | |
| 0 | InvalidPortType.Malformd | The PortType provided was invalid. | The port type is invalid. | |
| 0 | InvalidVRouterId.NotFound | Specified virtual router does not exist. | The specified vRouter does not exist. Check whether the vRouter ID is correct. | |
| 0 | InvalidGlobalAccelerationInstanceDescription.Malformed | The specified Description is not valid. | The format of the description is invalid. | |
| 0 | InvalidRouterInterface | invalid router interface. | The specified router interface does not exist. | |
| 0 | InvalidNextHop.NotFound | Specified next hop does not exist. | The specified next hop address does not exist. | |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | You cannot delete a vSwitch because it is associated with a high-availability virtual IP address (HaVip). | |
| 0 | Forbidden.OperationNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | The Virtual Border Router (VBR) cannot be recovered. | |
| 0 | Forbidden.OperationNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | The Virtual Border Router (VBR) cannot be terminated. | |
| 0 | InvalidIpCount.ValueNotSupported | The specified value of IpCount not supported. | The value of the IpCount parameter is invalid. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it’s status is Available or InUse. | This operation can be performed only when the HaVip is in the Available or InUse state. | |
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | The operation cannot be performed because the HaVip is in the Available or InUse state. | |
| 0 | RealNameAuthenticationError | Your account has not passed the real-name authentication yet. | Your account has not completed real-name verification. Complete the real-name verification before you proceed. | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | You cannot create a Virtual Border Router (VBR) for users from other sites. | |
| 0 | InvalidHaVip.NotFound | The specified HaVip does not exist. | The specified HaVip does not exist. | |
| 0 | Forbidden.NotInRouterInterfaceCreateWhitelist | Not in router interface create whitelist. | The specified account is not in the whitelist of the router interface. | |
| 0 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is InUse. | This operation can be performed only when the HaVip is in the InUse state. | |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | You must specify two to four router interfaces as next hops. | |
| 0 | IncorrectRouteEntryStatus | Some route entry status blocked this operation. | The operation cannot be performed because the current route table contains routes in the pending or modifying state. | |
| 0 | Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to modify. | The CircuitCode parameter cannot be modified. | |
| 400 | InvalidPeeringSubnetMask.Malformed | The specified PeeringSubnetMask is not valid. | The specified PeeringSubnetMask is invalid. Check whether the parameter is correct. | |
| 400 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The format of the vSwitch description is invalid. | |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | For equal-cost multi-path (ECMP) routing, you must select two to four router interfaces as next hops. | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | The NAT gateway has dependent IPv6 SNAT entries. Delete these entries before disabling IPv6. | |
| 0 | Forbidden.DestnationIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The private IP address is not within the CIDR block of the VPC. Specify a private IP address within the VPC CIDR block. | |
| 0 | InvalidBgpDescription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | The router interface cannot be deleted because it is referenced by a route entry as a next hop. Delete the route entry that points to the router interface before you delete the router interface. | |
| 0 | LastTokenProcessing | The last token request is processing. | A previous token request is still being processed. Try again later. | |
| 400 | InvalidAccessPointId.NotEnabled | Invalid access point status. | The current access point does not have sufficient resources to support the connection. Contact your account manager. | |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | The ECS instance already has port forwarding rules (DNAT). Delete the corresponding port forwarding rules before you perform this operation. | |
| 0 | Forbbiden.ModifyIdAndType | Opposite is VBR | The peer is a Virtual Border Router. | |
| 0 | Forbbiden.SubUser | The specified action is not available for you. | You are not authorized to perform this operation. | |
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | Possible causes: 1. You are not added to the whitelist for the 10.0.0.0/8 CIDR block and cannot use this CIDR block. 2. The destination CIDR block of the custom route that you want to add cannot be a subset of the CIDR blocks of all vSwitches in the same VPC. 3. The 100.64.0.0/10 CIDR block is reserved for cloud services. You cannot add a route that points to an on-premises data center with this CIDR block. 4. Except for 100.64.0.0/10, more specific route CIDR blocks such as 100.64.0.0/11 and 100.96.0.0/11 cannot be used for on-premises data centers. | |
| 0 | InvalidRedundantPhysicalConnectionId.NotFound | The RedundantPhysicalConnectionId does not found. | The redundant Express Connect circuit does not exist. | |
| 0 | InvalidIp.NotInNatgw | The specified Ip not belong to natgateway. | The IP address does not belong to the NAT gateway. | |
| 0 | IdempotentParameterMismatch | Request uses a client token in a previous request but is not identical to that request. | The client token used in the request is inconsistent. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | The current VPC still contains undeleted security groups, and the attempt to delete the VPC failed. Delete the security groups in the VPC before you delete the VPC. | |
| 0 | BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | You cannot perform operations on this EIP. | |
| 0 | InvalidParam.NotFound | Parameter must not be null | The parameter cannot be empty. | |
| 0 | InvalidServiceLocation.ValueNotSupported | The specified ServiceLocation is not supported. | The specified service region is not supported. | |
| 0 | ResourceNotAvailable.Vpc | Resource you requested is not available in this region or zone. | The requested resource is unavailable in the specified region or zone. | |
| 0 | DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | The IP address is referenced by an SNAT rule. Delete the SNAT rule before you perform this operation. | |
| 0 | IncorrectEipStatus | Current elastic IP status does not support this operation. | This operation is not supported for the specified EIP status. | |
| 400 | InvalidVpnGatewayInstanceId.NotFound | The specified vpn gateway instance id does not exist. | The specified VPN gateway does not exist. Check whether the VPN gateway is correct. | |
| 0 | Forbidden.IpUsedInForwardTable | The specified SnatIp already used in forward table | The public IP address is already used by a DNAT rule. Use another public IP address or delete the DNAT rule for the current public IP address. | |
| 0 | InvalidVRouterDiscription.Malformed | Specified virtual router description is not valid. | The format of the router description is invalid. | |
| 0 | Forbidden.ExternalIp.UsedInSnatTable | The specified ExternalIp is already used in SnatTable | The public IP address is already used by an SNAT rule. Use another public IP address or delete the SNAT rule for the current public IP address. | |
| 0 | InvalidBandwidth | invalid physical connection banwidth. | The bandwidth of the Express Connect circuit is invalid. | |
| 0 | QuotaExceeded | Route entry quota exceeded in this route table. | The route entry quota is exceeded. | |
| 0 | InvalidNextHopType | Specified parameter "NextHopType" is not valid | The next hop type is invalid. | |
| 0 | InvalidNatGatewayId.NotFound | The NatGatewayId not exist. | The specified NatGatewayId does not exist. Check whether the NatGatewayId is correct. | |
| 400 | InvalidIp.NotSameSubnet | Local gateway ip and peer gateway ip are not in the same subnet. | The local gateway IP address and the peer gateway IP address are not in the same subnet. | |
| 0 | InvalidIpAddress.WrongFormat | Specified IpAddress is invalid. | The IP address is invalid. | |
| 0 | ForwardEntry.Duplicated | The specified ExternalIp | The specified IP address already exists. Specify another IP address. | |
| 400 | Forbidden.VpcNotFound | Specified VPC can not found. | The specified VPC does not exist. Check whether the VPC is correct. | |
| 400 | Forbidden.SourceVSwitchId.IncludeHaVip | There is some HaVips under specified VSwitch | The vSwitch has an associated high-availability virtual IP address. | |
| 0 | Forbidden.InstanceNotFound | The specified Instance is not found | The instance does not exist. Check whether the instance is correct. | |
| 0 | InvalidBgpGroup | bgp group not exists | The BGP group does not exist. | |
| 0 | InvalidSnatEntryId.NotFound | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. Check whether the SNAT entry is correct. | |
| 0 | Invalid.natgwNotExist | The specified natgateway not exist. | The NAT gateway does not exist. | |
| 0 | Forbidden.SecurityGroupNotFound | The specified SecurityGroup is not found | The security group does not exist. | |
| 0 | InvalidChargeType.ValueNotSupported | The specified ChargeType is not supported. | The specified billing method is not supported. Select another billing method. | |
| 0 | ResourceNotAvailable | Resource you requested is not available in this region or zone. | Creating vSwitches is not supported in the current region or zone. | |
| 0 | InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | The peer router type of the next-hop router interface must be a Virtual Border Router. | |
| 0 | ZONE_NO_AVAILABLE_IP | The Zone have no available ip. | No IP addresses are available in the zone. | |
| 0 | Forbidden.ChargeTypeIsPrepaid | It’s forbidden to change prepaid EIP’s bandwidth by API. It can be changed on Aliyun web console. | You cannot use API operations to change the bandwidth of a subscription EIP. Change the specifications in the console instead. | |
| 0 | InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other subnets. | The vSwitch CIDR block overlaps with the CIDR block of another vSwitch or the destination CIDR block of an existing custom route. Use an available CIDR block. | |
| 400 | IncorrectVSwitchStatus | Some virtual switch is modifying within the same VPC. | Multiple vSwitches in the same VPC are in the Modifying state. Try again later. | |
| 0 | IncorrectVSwitchStatus | VSwitch Creation simultaneously is not supported. | Failed to create the vSwitch because another vSwitch in the VPC is in the Creating state. | |
| 0 | InvalidBackendServerRegionId.EqualRegionId | The specified BackendServerRegionId can not be the same as RegionId. | The specified BackendServerRegionId cannot be the same as the RegionId. | |
| 0 | ParameterIllegal | ipCount | The value of the IpCount parameter is invalid. | |
| 0 | IncorrcetRouteEntryStatus | Some route entry status blocked this operation. | The operation cannot be performed because some route entries are in the Pending or Modifying state. | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | The HaVip quota for the instance has been exceeded. | |
| 0 | DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | The customer gateway has associated VPN connections. Delete the associated VPN connections before deleting the customer gateway. | |
| 0 | InvalidIP.Malformed | Ip malformed. | The IP address format is invalid. | |
| 0 | InvalidPeerLocation.Malformd | The PeerLocation provided was invalid. | The value of the PeerLocation parameter is invalid. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active | You can perform this operation only when the router interface is in the Active state. | |
| 0 | InvalidSpec.ValudNotSupported | The specified Spec is not supported. | The operation is not supported for the current instance type. Change the instance type and try again. | |
| 0 | DependencyViolation.Instance | Specified object has dependent resources | The object has associated resources. | |
| 0 | IncorrectEipStatus | Current elastic IP status does not support this operation | The operation is not supported in the current state of the EIP. | |
| 0 | Forbidden.DescriptionNotAllowedByCaller | The caller is not allowed to specify the Description parameter. | The Description parameter is not allowed. | |
| 0 | IncorrectRole.NotInitiatingSide | The specified RouterInterface is not InitiatingSide. | The router interface is not the requester. Select a requester router interface to initiate the connection. | |
| 0 | DependencyViolation.Tunnel | Specified object has dependent tunnel. | The object has associated tunnels. | |
| 0 | IncorretForwardEntryStatus | Some Forward entry status blocked this operation.. | The operation cannot be performed because some DNAT entries in the DNAT table are in the Pending or Modifying state. | |
| 0 | InvalidNexthop | The Specified nexthop illage. | The specified NextHopId does not exist. | |
| 0 | VswitchStatusError | The VSwitch is creating . | The vSwitch is being created. | |
| 0 | InvalidGlobalAccelerationInstanceName.Malformed | The specified Name is not valid. | The name format is invalid. | |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | The number of route entries that point to the HaVip instance has reached the upper limit. | |
| 0 | InvalidExternalIp.Malformed | The specified ExternalIp is not a valid IP address. | The public IP address is invalid. | |
| 0 | InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our records. | The specified router interface does not exist. Check whether the router interface is correct. | |
| 0 | Forbidden.PeeringSubnetMaskNotAllowedByCaller | The caller is not allowed to specify the PeeringSubnetMask parameter. | The PeeringSubnetMask parameter is not allowed. | |
| 0 | InvalidProtocal.ValueNotSupported | The specified IpProtocol does not support. | The protocol type is not supported. | |
| 0 | InvalidBackendServerRegionId.Mismatch | The specified BackendServerRegionId is not in the GlobalAccelerationInstance’s ServiceLocation. | The specified BackendServerRegionId is not in the service area of the Global Accelerator instance. | |
| 0 | Forbidden.RAM | User not authorized to operate on the specified resource | The Resource Access Management (RAM) user does not have the permission to execute this operation. | |
| 0 | INVALID_PARAMETER | The parameter invalid. | The parameter is invalid. | |
| 0 | invalidRemovedIpAddresses.NotFound | Some of the specified value of RemovedIpAddress not found in specified BandwidthPackage. | An IP address in the IP list is not included in the Internet Shared Bandwidth. Check the IP addresses in the list. | |
| 0 | InvalidRole.ValueNotSupported | The specified Role is not valid. | The specified Role parameter is invalid. Check whether the parameter is correct. | |
| 0 | InvalidInstanceId.NotFound | The InstanceId provided does not exist in our records. | The ECS instance does not exist in the specified VPC. | |
| 0 | InvalidVSwitchId.NotFound | The specified VSwitch does not exist in the specified region. | The vSwitch does not exist in the specified region. | |
| 0 | InvalidVSwitchId.NotFound | VSwitch not exist. | The vSwitch does not exist. Check whether the specified vSwitch is correct. | |
| 0 | InvalidVSwitchId.NotFound | The specified virtual switch not found. | The vSwitch does not exist. | |
| 0 | InvalidVSwitchId.NotFound | The specified virtual switch does not exists. | The vSwitch does not exist. Check whether the specified vSwitch is correct. | |
| 0 | VpnGateway.FinancialLocked | The specified service is financial locked. | The service has an overdue payment. Top up your account before performing this operation. | |
| 0 | IncorretVSwitchStatus | Failed to create the vSwitch because some vSwitches are in the Pending state. | ||
| 0 | Forbidden.ChargeTypeIsPrepaid | It's forbidden to release a prepaid EIP | Subscription EIP instances cannot be released. | |
| 0 | InvalidInstanceType.ValueNotSupported | The specified value of InstanceType is not supported. | The value of the InstanceType parameter is invalid. | |
| 0 | InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state. | The state of the Virtual Border Router is invalid. Check the state of the Virtual Border Router. | |
| 0 | InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | The CIDR block already exists in the route table. | |
| 0 | OperationDenied | Specified instance is not in VPC. | The instance does not exist in the VPC. | |
| 0 | OperationDenied | Specified operation is denied as route entry type is system. | The operation cannot be performed because the route entry is a system route entry. | |
| 0 | OperationDenied | The snapshot creation for the specified disk is not finished yet. | The snapshot creation for the specified disk is not yet complete. | |
| 0 | OperationDenied | The operation is not supported in this status. | This operation cannot be performed in the current state. | |
| 0 | OperationDenied | Eip of default vpc not allow this operation | This operation is not supported for elastic IP addresses in the default VPC. | |
| 0 | InvalidIp.Malformed | The specified ip address is not valid. | The specified private IP address is invalid. Check whether the private IP address is correct. | |
| 0 | FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | The CIDR block must be a subset of the VPC CIDR block. | |
| 0 | Forbidden.DiskNotFound | The specified Disk is not found | The disk does not exist. | |
| 0 | InvalidInstanId.NotFound | Specified instance does not exist. | The specified instance does not exist. Check whether the instance is correct. | |
| 0 | VpcStatusError | The Vpc is creating . | The system is attempting to create a VPC. | |
| 0 | InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state | This operation is not supported in the current state of the Virtual Border Router interface. | |
| 0 | InvalidInternalIp.Malformed | The specified InternalIp is not a valid IP address. | The destination private IP address is invalid. | |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | The VPC contains NAT gateways and cannot be deleted. To delete a VPC, you must first delete the NAT gateways in the VPC. | |
| 0 | InvalidRouteTableId.NotFound | Specified route table does not exist. | The route table does not exist. | |
| 0 | InvalidBgpAuthkey.Malformed | Specified Bgp Group authkey is not valid. | The authentication key of the BGP group is invalid. | |
| 0 | InvalidBgpName.Malformed | Specified Bgp Group name is not valid. | The name of the BGP group is invalid. | |
| 0 | InvalidIPAddress.NotAvailable | The specified IPAddress is not available because it is a system reserved IPAddress. | The IP address is unavailable because it is reserved by the system. | |
| 0 | QuotaExceeded.pConnPerAP | Physical connection count per ap quota exceed. | The Express Connect circuit quota for the access point is exceeded. | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | You do not have the permissions to operate on the specified resource. Apply for the required permissions and try again. | |
| 0 | InvalidBackendServerType.NotFound | The specified BackendServerType is not supported. | The specified backend server type is not supported. | |
| 0 | InvalidVRouter.NotFound | vRouter not exists. | The router does not exist. Check whether the specified router is correct. | |
| 0 | MissingParameter | Either nexthopId or nextHopList should be specified | You must specify either nexthopId or nextHopList. | |
| 0 | MissingParameter | Missing mandatory parameter | Required parameters are missing. Check whether all required parameters are specified and try again. | |
| 0 | InvalidParam.NotNull | The parameter must not be null. | The parameter cannot be empty. | |
| 0 | InvalidAccessPoint.ValueNotAllowed | The non-vbr router interface cannot have access point configured. | Access points cannot be configured for router interfaces that are not Virtual Border Routers. | |
| 0 | InvalidUserCidr.Malformed | Specified UserCird status is wrong | The state of the UserCidr is invalid. | |
| 0 | InvalidRouterId.NotFound | The specified RouterId does not exist in our recored. | The specified RouterId does not exist. | |
| 0 | MCMS_VPC_EMPTY | Specified region have no vpc. | No VPC exists in the specified region. Check whether the region is correct or try another region. | |
| 0 | InvalidDescription | The description is not valid | The description format is invalid. | |
| 0 | InvalidVBRStatus | invalid virtual border router status. | The state of the Virtual Border Router is invalid. | |
| 400 | QuotaExceeded.Eip | Elastic IP address quota exceeded. | The number of elastic IP addresses exceeds the quota limit. If you need a higher quota, apply to increase the elastic IP address quota or consider using a NAT gateway. | |
| 0 | Resource.QuotaFull | The quota of resource is full | The resource quota limit has been reached. | |
| 0 | InvalidInstance.StatusError | The router instance owener error. | An instance status fault occurred. | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | The high-availability virtual IP address does not exist in the VPC. | |
| 0 | EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | The instance is already assigned a public IP address. | |
| 0 | InvalidServiceLocation.Mismatch | The specified ServiceLocation does not match the region. | The specified service area does not match the current region. | |
| 0 | InvalidLocalGatewayIp.Malformed | The specified LocalGatewayIp is not valid. | The IP address of the local gateway is invalid. | |
| 0 | InvalidFilterKey.NotFound | The key value of the filter is invalid. | ||
| 0 | InvalidRegionId.NotSupport | The RegionId provided does not support in our records. | The specified region ID is incorrect. | |
| 0 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId must be all set. | You must specify all four parameters: OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId. | |
| 0 | IncorrectRouteEntryStatus | Specified routeEntry status error. | The operation cannot be performed because the current route table contains routes in the pending or modifying state. | |
| 0 | InsufficientBalance.Eip | Your account does not have enough balance. | Your account balance is insufficient. Top up your account and try again. | |
| 0 | IncorrectRouteEntryStatus | VBR has NotStable route entry. | The operation cannot be performed because one or more routes in the border route table are in the pending or modifying state. | |
| 0 | IncorrectRouteEntryStatus | The vpc has NotStable routeEntry status. | The operation cannot be performed because the current route table contains routes in the pending or modifying state. | |
| 0 | IncorrectRouteEntryStatus | Vpc NotStable route entry. | The operation cannot be performed because the current route table contains routes in the pending or modifying state. | |
| 0 | InvalidParameter.Spec.ValueNotSupported | The specified Spec is not valid. | The specified specification is invalid. | |
| 0 | DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | The specified object has associated router interfaces. | |
| 0 | InvalidStatus.NotAllowed | The virtual border has been associated by physicalConnection. | The Virtual Border Router is already associated with an Express Connect circuit. | |
| 0 | InvalidBgpDiscription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | |
| 0 | VpnUnderStock | There are not enough vpn gateways in stock | The VPN gateway inventory is insufficient. | |
| 0 | InvalidParameter.Mismatch | Specified elastic IP address and ECS instance are not in the same region. | The EIP and the ECS instance are not in the same region. | |
| 0 | Forbidden.FinancileLocked | This RouterInterface is financiel locked because of bills outstanding. | The routing interface is locked due to an overdue payment. | |
| 0 | InvalidVbrNetwork | vbr netowrk not exists | The Virtual Border Router does not exist. Check whether the specified Virtual Border Router is correct. | |
| 0 | Forbidden.EnableClassicLink | Only VPCs with the CIDR blocks 172.16.0.0/12, 192.168.0.0/16, or 10.0.0.0/8 can enable ClassicLink. For more information, see ClassicLink features and limits. | ||
| 0 | TaskConflict | The eip operate too frequent | EIP operations are too frequent. | |
| 0 | InvalidInstanceId.NotFound | Specified instance does not exist. | The instance does not exist. Check whether the instance is correct. | |
| 0 | InvalidInstanceId.NotFound | The specified Instance does not exist in the specified region. | The instance does not exist in the specified region. | |
| 400 | InvalidIAssociatedInstanceType.ValueNotSupported | The specified value of AssociatedInstanceType is not supported. | The value of AssociatedInstanceType is invalid. Check whether the parameter is correct. | |
| 0 | InvalidNextHopId.NotFound | Specified next hop does not exist. | The specified next hop does not exist. | |
| 0 | InvalidRouterType.ValueNotSupported | The specified RouterType is not valid. | The specified router type is invalid. | |
| 0 | SNAT_IP_POOL_COUNT_TOO_MANY | The Snat pool ip too many. | The number of IP addresses in the SNAT IP pool has reached the quota. | |
| 0 | Forbidden.OperationNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | You are not allowed to delete the Virtual Border Router. | |
| 0 | InvalidName.Malformed | The specified "Name" is not valid. | The specified name format is invalid. | |
| 0 | InvalidName.Malformed | The specified ‘Name’ is not valid. | The specified name format is invalid. | |
| 0 | InvalidVpcDiscription.Malformed | Specified VPC description is not valid. | The format of the VPC description does not meet the requirements. | |
| 0 | Forbidden.PeerGatewayIpNotAllowedByCaller | The caller is not allowed to specify the PeerGatewayIp parameter. | You are not allowed to specify the PeerGatewayIp parameter. | |
| 0 | IncorrectOppositeInterfaceInfo | Cannot connect on the same router | Connecting to the same router is not allowed. | |
| 0 | InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | The format of the CIDR block is invalid. | |
| 0 | InvalidNextHop | Specified nexthop and nexthop list cannot both null. | The next hop and the next hop list cannot be empty at the same time. | |
| 0 | InvalidVPC.NotFound | vpc not exists. | The virtual private cloud (VPC) does not exist. Check whether the specified VPC is correct. | |
| 0 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The vSwitch description is invalid. | |
| 0 | Forbidden.NoRiFound | No vlan router interfaces are found. | There are no available VLAN router interfaces. | |
| 0 | Forbidden.NameNotAllowedByCaller | The caller is not allowed to specify the Name parameter. | You are not allowed to specify the Name parameter. | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified region. | The specified HaVip is not in the specified region. Check whether the region is correct. | |
| 0 | InvalidParams.NotFound | instance not found | The instance does not exist. | |
| 0 | InvalidIdempotenceParameter.Mismatch | The specified parameters are different from before. | The client token is different from the previous one. | |
| 0 | NOT_ALLOW_USE_SOURCECIDR | The User not in nat_scope_unlimited white list. Cannot use SourceCidr param. | The internal IP address is outside the CIDR block of the VPC. | |
| 0 | InvalidIPAddress.OutOfRange | The specified IPAddress is out of VSwitch CIDR. | The private IP address is not within the vSwitch CIDR block. | |
| 0 | QuotaExceeded.freevbr | Free virtual boarder router quota exceed. | The Virtual Border Router quota is exceeded. | |
| 0 | QuotaExceed.RouterInterface | Living RouterInterface quota exceeded. | The number of active router interfaces has reached the quota. | |
| 0 | InvalidSnatIp.NotFound | Specified SnatIp does not found on the NAT Gateway | The public IP address is not associated with the NAT gateway. | |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | The vSwitch cannot be deleted because it has unreleased resources. | |
| 0 | QuotaExceeded.HaVip | Living HaVip quota exceeded. | The quota for active HaVips has been exceeded. | |
| 0 | InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | The start time is invalid. | |
| 400 | InvalidParameter | The parameter is invalid. | The parameter is invalid. | |
| 0 | CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | Cross-BID connections are not allowed. | |
| 0 | InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | The start time is invalid. | |
| 0 | InvalidLineOperator.Malformd | The LineOperator provided was invalid. | The value of the LineOperator parameter is invalid. | |
| 0 | InvalidOppositeRegionId.NotFound | The oppositeRegionId provided does not exist in our records. | The specified peer region does not exist. | |
| 0 | InvalidNatGatewayName.MalFormed | NatGateway name is not valid. | The specified gateway name is invalid. | |
| 400 | InvalidOpposite.NotFound | The opposite does not exist. | The peer does not exist. | |
| 0 | InvalidNatGatewayDescription.MalFormed | NatGateway description is not valid. | The specified gateway description is invalid. | |
| 0 | Forbidden.VBRExists | physical connection owner's vbr still exists. | The Virtual Border Router (VBR) associated with the Express Connect circuit still exists. | |
| 404 | InvalidVpcId.NotFound | Specified value of VpcId is not found in our record. | The VPC does not exist. Check whether the specified VPC is correct. | |
| 400 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | The request failed due to a temporary server error. | |
| 400 | QuotaExceeded.LocalISPEip | The quota for Local ISP EIPs has been exceeded. | The LocalISP quota has been exceeded. | |
| 400 | QuotaExceeded.LocalISPBasicEip | The quota for Local ISP Provider EIP has been exceeded. | The LocalISPBasic EIP quota has been exceeded. | |
| 400 | OperationDenied.ExceedMaxCount | The number of IPs exceeds the maximum limit of 50 per batch operation. | The number of IP addresses in a single batch operation exceeds the upper limit of 50. Perform the operation in multiple batches. | |
| 400 | OperationDenied.Ipv6InCommonBandwidthPackage | The specified IPv6 instance has joined a common bandwidth package. Please remove it from the package before releasing its public bandwidth. | The specified IPv6 instance is already added to an Internet Shared Bandwidth instance. Remove it from the Internet Shared Bandwidth instance before you release its Internet bandwidth. | |
| 400 | OperationUnsupported.BandwidthPackageType | Only common bandwidth packages of the Common type support this operation. | This operation is supported only by Internet Shared Bandwidth instances of the Common type. | |
| 400 | OperationUnsupported.Ipv6QosNotReady | IPv6 QoS bandwidth limiting is not supported yet. | Setting or canceling secondary bandwidth throttling (QoS) for IPv6 addresses is not supported. | |
| 400 | OperationFailed.Ipv6AlreadyBinded | The specified IPv6 instance has already joined another common bandwidth package. | The specified IPv6 address is already added to another Internet Shared Bandwidth instance. Remove it from the current instance before you proceed. | |
| 400 | OperationDenied.Ipv6NoBandwidth | IPv6 instances without public bandwidth enabled cannot join a common bandwidth package. | IPv6 instances that are not assigned Internet bandwidth cannot be added to an Internet Shared Bandwidth instance. | |
| 400 | OperationDenied.InstanceNotSupportIpv6 | The specified common bandwidth package does not support IPv6 because its availability zone is not in the Lingze cluster. | The specified Internet Shared Bandwidth instance does not support adding IPv6 addresses. Contact customer service or submit a ticket for assistance. | |
| 400 | OperationDenied.BandwidthPackageNotDualStack | The IP version of the specified common bandwidth package does not match the operation. A dual-stack bandwidth package is required. | The IP version of the specified Internet Shared Bandwidth instance does not match the operation. To remove an IPv6 address, the Internet Shared Bandwidth instance must be of the dual-stack type. | |
| 400 | OperationDenied.BandwidthLessThanMemberMax | The new bandwidth value is less than the maximum QoS bandwidth of member IPs in the common bandwidth package. | The modified bandwidth value is less than the maximum secondary bandwidth limit configured for the member IP addresses in the Internet Shared Bandwidth instance. The new bandwidth value must be greater than or equal to the maximum bandwidth limit of all member IP addresses. | |
| 400 | OperationUnsupported.PrepaidIpv6 | Prepaid IPv6 instances cannot join a common bandwidth package. Only pay-as-you-go IPv6 instances are supported. | Subscription IPv6 addresses cannot be added to an Internet Shared Bandwidth instance. Only pay-as-you-go IPv6 addresses are supported. | |
| 400 | OperationDenied.RegionNotSupportDualStack | The current region does not support dual-stack common bandwidth package. Please confirm that the dual-stack feature is enabled for this region. | Dual-stack Internet Shared Bandwidth instances are not supported in the current region. Make sure that the dual-stack feature is enabled in this region. | |
| 400 | OperationDenied.IPv6RouteEntryExist | The operation is not allowed because IPv6 custom route entries still exist in the VPC. Delete the IPv6 custom route entries, and then unassociate the IPv6 CIDR block again. | The operation is not allowed because custom Custom routes still exist in the VPC. Delete these custom Custom routes before you disassociate the IPv6 CIDR block. | |
| 400 | OperationDenied.EniBizTypeNotSupportRouteEntry | The operation is not allowed because of EniBizTypeNotSupportRouteEntry. | The service type of the ENI does not support being used as the next hop of a route. Only ENIs of the normal or bonding service type can be used as the next hop. | |
| 400 | UnsupportedFeature.Ipv6OnlyVsw | IPv6-only VSwitches are not supported in this region. | The IPv6-only vSwitch feature is not enabled for the current account in the specified region. You cannot create an IPv6-only vSwitch. | |
| 400 | OperationDenied.BatchCreateRouteEntryToCen | Failed to batch create route entries to CEN. The CEN side rejected this route distribution operation. | Failed to batch create routes in the CEN instance. The CEN instance rejected the route delivery operation. | |
| 400 | IncorrectStatus.PrefixListRelation | The related prefix list relation is in an intermediate state and cannot perform the current operation. | The association of the related prefix list is in an intermediate state. The current operation cannot be performed. | |
| 500 | OperationFailed.SYSTEM_BLOCK | The request is temporarily blocked due to system overload in the region. Please try again later. | The system load in the current region is excessively high, and the request is temporarily blocked. Try again later. | |
| 500 | OperationFailed.SOCKET_TIMEOUT_ERROR | The request timed out while calling the backend service. Please try again later. | The call to the backend service timed out. Try again later. | |
| 400 | Forbidden.RateLimitRule | You are not authorized to operate the rate limit rule feature. | You do not have the permissions to manage bandwidth throttling rules. | |
| 400 | IncorrectStatus.RateLimitRule | The specified rate limit rule is in a status that does not support modification. | The operation is not supported because of the current state of the specified bandwidth throttling rule. | |
| 400 | InvalidParameter.CidrTunnelExclusive | SourceCIDRs and TunnelIndex are mutually exclusive. | SourceCIDRs and TunnelIndex are mutually exclusive and cannot be specified at the same time. | |
| 403 | Forbidden.RAM | Request was denied due to user RAM permission check denied. | RAM authentication failed. You do not have the permissions to perform this operation. | |
| 400 | IncorrectStatus.RateLimitRule | The specified rate limit rule is in a status that does not support deletion. | The deletion operation is not supported because of the current state of the bandwidth throttling rule. | |
| 400 | ResourceAlreadyExists.RateLimitRule | The specified rate limit rule already exists. | An identical bandwidth throttling rule already exists under the specified NAT gateway. | |
| 400 | InvalidParameter.SourceCidrDuplicated | The specified source CIDRs contain duplicate entries. | Duplicate entries exist in the specified source CIDR block list. | |
| 400 | OperationFailed.SnatEntryNotReady | The SNAT entry associated with the specified TunnelIndex is not ready. Please try again later. | The SNAT entry corresponding to the specified TunnelIndex is not ready. Try again later. | |
| 400 | InvalidRateLimitRuleId.NotFound | The specified rate limit rule does not exist. | The specified rate limit rule does not exist. | |
| 400 | QuotaExceeded.RateLimitRule | The quota of rate limit rules per NAT gateway is exceeded. | The number of rate limit rules for a single NAT gateway exceeds the quota. | |
| 400 | InvalidParameter.TunnelIndex | The specified TunnelIndex does not belong to a valid SNAT entry of the NAT gateway. | The specified TunnelIndex does not belong to a valid SNAT entry of the NAT gateway. | |
| 400 | InvalidParameter.SourceCidrConflict | The specified source CIDR conflicts with an existing rate limit rule. | The specified source CIDR block conflicts with an existing rate limit rule. | |
| 400 | ResourceAlreadyExists.TunnelRateLimitRule | A rate limit rule already exists for the specified tunnel index. | A rate limit rule already exists for the specified TunnelIndex. | |
| 400 | InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist. | The specified NAT gateway instance does not exist. | |
| 400 | IllegalParam.NextToken | The param of NextToken is illegal. | The NextToken parameter is invalid. | |
| 400 | OperationDenied.RateLimitRule | The operation is not allowed because the specified parameters are invalid or the NAT gateway does not support the IP rate limit feature. | The operation is not allowed because the specified parameters are invalid or the NAT gateway does not support the IP rate limiting feature. | |
| 400 | QuotaExceeded.RateLimitRuleSourceCidr | The quota of source CIDRs per rate limit rule is exceeded. | The number of source CIDR blocks in a single rate limit rule exceeds the quota. | |
| 400 | OperationDenied.Dns64AlreadyEnabled | The operation is not allowed because DNS64 is already enabled on the VSwitch. | DNS64 for the vSwitch is already in the enabling status. You do not need to enable it again. | |
| 400 | OperationDenied.Dns64RequiresIpv6 | The operation is not allowed because DNS64 can only be enabled when the VSwitch has an IPv6 CIDR block. | DNS64 can be enabled only when the vSwitch is configured with an IPv6 CIDR block. | |
| 400 | UnsupportedFeature.Dns64 | The feature of DNS64 is not supported. | The DNS64 feature is not supported in the current region or zone. | |
| 400 | OperationDenied.Dns64Disabled | The operation is not allowed because DNS64 is already disabled on the VSwitch. | DNS64 is already disabled for the vSwitch. You do not need to disable it again. | |
| 400 | OperationDenied.EnableIpv6AndDns64AtTheSameTime | The operation is not allowed because enabling IPv6 and DNS64 at the same time is not supported. | Enabling both IPv6 and DNS64 at the same time is not supported. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The param of cidrBlock and Ipv6Only are mutually exclusive. | The param of cidrBlock and Ipv6Only are mutually exclusive. | |
| 400 | InvalidTunnel.AdminStatus | The specified tunnel admin status does not support this operation. | This operation is not supported in the specified tunnel admin state. | |
| 400 | OperationDenied.NatGatewayIpv6NotEnabled | The IPv6 feature is not enabled for the NAT gateway. | The IPv6 feature is not enabled for the NAT gateway. | |
| 409 | OperationFailed.RouteConflict | The CIDR blocks of the specified prefix list conflict with existing routes: %s. | The CIDR blocks in the specified prefix list conflict with existing route entries on the IPsec-VPN connection. Resolve the conflicts and try again. | |
| 400 | InvalidParameter.RateLimitRule | The specified parameter %s is not valid. %s. | The request parameters for the NAT gateway rate limit rule are invalid. The error message provides the parameter names and value requirements. | |
| 400 | OperationUnsupported.Ipv6SnatNotSupported | The operation is not supported because IPv6 source CIDR SNAT entries are not supported for this NAT gateway. | The NAT gateway does not support creating SNAT entries with IPv6 source CIDR blocks. The creation request using an IPv6 CIDR block as the source CIDR block is rejected. | |
| 400 | OperationFailed.VSwitchIpv6NotEnabled | The operation failed because IPv6 is not enabled on the specified VSwitch. | The operation failed because IPv6 is not enabled on the specified vSwitch. | |
| 400 | OperationUnsupported.Ipv6NotEnabled | The operation is not allowed because IPv6 is not enabled on the NAT gateway. | This operation is not allowed on a NAT gateway for which IPv6 is not enabled. | |
| 400 | OperationFailed.EniIsUnsuccessful | The operation failed because the elastic network interface is in an unsuccessful state. | The operation failed because the network interface controller (NIC) is in an abnormal state. | |
| 400 | UnsupportedFeature.Ipv6Enabled | The feature of Ipv6Enabled is not supported. | The current NAT gateway does not support the Ipv6Enabled feature. | |
| 400 | IncorrectStatus.VSWITCH | The status of VSWITCH is incorrect. | The vSwitch is in an abnormal state. | |
| 400 | OperationUnsupported.Ipv6NotSupported | The operation is not supported because the IPv6 feature is not enabled for the current account or region. | The IPv6 feature is not enabled for the current account or region. This operation is not supported. | |
| 400 | DependencyViolation.SnatEntry | The NAT gateway has dependent IPv6 SNAT entries. Delete them before disabling IPv6. | The NAT gateway has dependent IPv6 SNAT entries. Before disabling IPv6, please remove these entries first. | |
| 400 | UnsupportedOperation.TraditionalVpnGateway | The traditional VPN gateway does not support tunnel admin operations. | Traditional VPN gateways do not support tunnel admin operations. | |
| 500 | InternalError.PrefixListAssociatingFailed | Failed to notify VPC that the prefix list is being associated. | Failed to initiate the prefix list association. Try again later. If the failure persists, submit a ticket. | |
| 404 | ResourceNotFound.VcoPrefixListAssociation | The specified prefix list association does not exist. | The specified prefix list association does not exist. Check whether the association ID is correct or whether the association has been deleted. | |
| 400 | InvalidParameter.PublishVpcNotSupported | PublishVpc is not supported by the VpnAttachment, whose routes are published to the transit router. | The routes of the VpnAttachment to which the IPsec-VPN connection belongs have already been published to the transit router. Publishing routes to the VPC is not supported. Remove the PublishVpc parameter and try again. | |
| 409 | OperationFailed.AssociationAlreadyExists | The specified prefix list is already associated with the IPsec connection. | The specified prefix list is already associated with the IPsec-VPN connection. You do not need to associate it again. | |
| 400 | OperationFailed.PrefixListSyncing | A previous change of the specified prefix list is still being synchronized. | The previous change to the specified prefix list is still being synchronized. Wait for the synchronization to complete and try again. | |
| 400 | InvalidParameter.PrefixListContainsInvalidCidr | The specified prefix list contains CIDR blocks that are not allowed: %s. | The specified prefix list contains disallowed CIDR blocks: %s. Modify the prefix list and try again. | |
| 400 | OperationUnsupported.PrefixListAssociation | Associating VPC prefix lists is not supported in the current region or for the current account. | The capability to associate VPC prefix lists is not available in the current region or for the current account. Change the region or submit a ticket to request access. | |
| 400 | QuotaExceeded.PrefixListCidr | The number of route entries exceeds the quota of the VPN gateway by %s. | The number of route entries after expanding the prefix list exceeds the VPN gateway route quota of %s. Reduce the number of CIDR blocks in the prefix list. | |
| 400 | InvalidParameter.IpVersionMismatch | The IP version of the CIDR blocks does not match the IPsec connection: %s. | The address family of the CIDR blocks in the prefix list does not match that of the IPsec-VPN connection: %s. Use CIDR blocks with the same address family as the endpoint. | |
| 400 | OperationUnsupported.SingleTunnelVpnGateway | Single-tunnel VPN gateways do not support associating prefix lists. We recommend upgrading to the dual-tunnel model. | Single-tunnel VPN gateways do not support associated prefix lists. Use a dual-tunnel VPN gateway instead. | |
| 500 | InternalError.PrefixListDissociatingFailed | Failed to notify VPC that the prefix list is being dissociated. | Failed to disassociate the prefix list. Try again later. If the failure persists, submit a ticket. | |
| 400 | QuotaExceeded.PrefixListAssociation | The number of prefix lists associated with the IPsec connection exceeds the quota. | The number of prefix lists associated with the IPsec-VPN connection has exceeded the quota limit. Disassociate some prefix lists and try again. | |
| 400 | InvalidParameter.EmptyPrefixList | The specified prefix list contains no CIDR block. | The specified prefix list does not contain any CIDR blocks. Add CIDR blocks to the prefix list and try again. | |
| 400 | OperationUnsupported.FullNatIpv6NotSupported | The operation is not supported because IPv6 is not supported for this type of NAT gateway. | This type of VPC NAT gateway does not support IPv6. The request to enable IPv6 during creation or modification is rejected. | |
| 400 | QuotaExceeded.IpamVpcCidrPerConflictDetectionScope | The number of IPv4 VPC CIDRs per conflict detection scope has exceeded the quota limit. | The number of IPv4 VPC CIDR blocks under a single conflict detection scope has exceeded the quota limit. | |
| 400 | IllegalParam.ParentCidrBlock | The specified ParentCidrBlock is not valid. | The specified parent CIDR block (ParentCidrBlock) is invalid. | |
| 400 | IncorrectStatus.IpamScope | The status of the specified IPAM scope is incorrect. | The current state of the IPAM scope does not allow this operation. | |
| 400 | OperationDenied.VSwitchCidrConflictInScope | The operation is not allowed because the specified VSwitch CIDR block conflicts with an existing CIDR block in the IPAM scope. | The specified vSwitch CIDR block conflicts with an existing CIDR block in the IPAM scope. The vSwitch cannot be created. | |
| 400 | QuotaExceeded.IpamVSwitchCidrPerConflictDetectionScope | The number of IPv4 VSwitch CIDRs per conflict detection scope has exceeded the quota limit. | The number of IPv4 vSwitch CIDR blocks under a single conflict detection scope has exceeded the quota limit. | |
| 400 | OperationDenied.VpcIpv4CidrNotFound | The operation is not allowed because the VPC does not have an IPv4 CIDR block. | The operation is rejected because the VPC does not have an IPv4 CIDR block. | |
| 400 | OperationDenied.CidrMaskAllocationUnavailable | The operation is not allowed because the CIDR mask allocation mode is unavailable. | The operation is rejected because the mask allocation mode is unavailable. | |
| 400 | IllegalParam.CidrMask | The specified CidrMask is not valid. | The specified netmask (CidrMask) is invalid. | |
| 400 | OperationDenied.IpamScopeInMiddleStatus | The operation is not allowed because the IPAM scope is in an intermediate state. Please try again later. | The IPAM scope is in a transitional state and does not allow this operation. Try again later. | |
| 400 | IllegalParam.IpType | The parameter of IpType is illegal. | The IpType parameter is invalid. Valid values: EIP, VpcIpv6, EcsPublicIp, ClbPublicIp, and ClbPublicIpv6. | |
| 400 | IllegalParam.IpInstanceIdAndEipInstanceIdConflict | IpInstanceId and EipInstanceId must be the same when both are provided. | The specified IpInstanceId and EipInstanceId parameters are inconsistent. Specify the same value for both parameters or specify only one of them. | |
| 400 | OperationDenied.TargetTypeNotSupportBondAsSourceType | The target of traffic mirroring must be a Bond ENI when the source of traffic mirroring has a non-NAT type of Bond ENI. | If a traffic mirroring source contains a bonded ENI that is not of the NAT type, the traffic mirroring destination must be a bonded ENI. | |
| 400 | OperationDenied.MemberAddressFamilyMismatch | The operation is not allowed because of %s. | The protocol stack of the route target group member does not match that of the route target group. | |
| 400 | UnsupportedFeature.IPv6OnlyRouteTargetGroup | The IPv6 Only RouteTargetGroup is not supported in this region. | Route target groups in the current region do not support IPv6 single-stack. | |
| 400 | UnsupportedFeature.DualStackRouteTargetGroup | The DualStack RouteTargetGroup is not supported in this region. | Route target groups in the current region do not support dual-stack mode. | |
| 400 | OperationDenied.RouteTargetGroupNotSupportIpv6 | The route target group does not support IPv6. | The route target group does not support IPv6. | |
| 400 | OperationFailed.BindEipForIpv6OnlyEni | The operation failed because binding an EIP to an IPv6-only ENI is not supported. | The operation failed because you cannot attach an IPv6-only network interface controller (NIC) to associate with an EIP. | |
| 400 | UnsupportedFeature.CreateHaVipInIPv6OnlySubnet | Creating a HaVip in an IPv6-only subnet is not supported. | You cannot create a high-availability virtual IP address (HAVIP) in an IPv6-only subnet. | |
| 400 | Forbidden.ParameterSecurityViolation | The request parameter is rejected due to security policy. | The request contains invalid parameters that violate the security policy. | |
| 400 | UnsupportedFeature.CreateHaVipInIPv6OnlyVSwitch | Creating a HaVip in an IPv6-only vSwitch is not supported. | You cannot create a high-availability virtual IP address (HAVIP) in an IPv6-only vSwitch. | |
| 400 | OperationUnsupported.Ipv6OnlyVSwitch | The operation failed because creating a Flowlog for IPv6-only VSwitch is not supported. | You cannot create a flow log for an IPv6 single-stack vSwitch. |
Is this page helpful?