Error codes
1XXX: General errors
Error code | Error code (legacy) | Error message |
InternalError | 1000 | An internal system error occurred. |
App.InvalidParameter.SchemaEmpty | 1001 | The application schema cannot be empty. |
InvalidParameter.ReservedWord | 1005 | The name contains a reserved word. |
InternalError | 1006 | The request to the backend service timed out. Try again. |
InvalidParameter | 1007 | The format of the request parameters is invalid. |
NotFound | 1010 | The requested resource does not exist. |
Duplicated | 1011 | The resource already exists. |
OutOfRange | 1012 | The number of resources is limited. |
InternalError | 1100 | An internal system error occurred. |
20XX: Application and application version errors
Error code | Error code (legacy) | Error message |
App.NotFound | 2001 | The specified application does not exist. |
App.Duplicated | 2002 | The application already exists. |
App.InvalidParameter.Name | 2004 | The application name is invalid. The application name must start with a letter and can contain digits, letters, and underscores (_). It can be up to 30 characters in length. |
App.InvalidParameter.NameEmpty | 2005 | The application name is empty. |
App.OutOfRange.DescriptionLength | 2007 | The description cannot exceed 300 characters. |
App.InvalidParameter.Summary | 2008 | The summary configuration parameters are invalid. |
UnknownCode.2009 | 2009 | Failed to update the status. |
App.AbnormalStatus.Pause | 2010 | The application is paused. |
App.AbnormalStatus.Forbid | 2011 | The application is frozen. |
App.NotFound | 2019 | The specified application version does not exist. |
App.Forbidden.OnlineVersion | 2021 | You are deleting a version that is in service. To ensure that your service is not affected, switch another version online first. |
App.Forbidden.VersionProcessing | 2022 | The previous version is not complete. You cannot create a new version. |
App.InvalidParameter.RealtimeShared | 2023 | The shared real-time stream parameter (realtime_shared) is not specified or is invalid. |
App.InvalidParameter.Version | 2024 | You cannot specify a version number when you create a new version. |
App.Forbidden.QueryProcessor | 2025 | Basic applications do not support query analysis. |
App.Forbidden.Suggest | 2026 | Basic applications do not support drop-down suggestions. |
App.Unavailable | 2027 | A full data import is in progress or has been completed for this application version. You cannot import data again. |
App.Unavailable.NotReady | 2028 | The application has not been completely created. Full data import is not allowed. |
App.InvalidParameter.Type | 2029 | The application type is invalid. |
App.InvalidParameter.Type | 2030 | The current application type does not support this URI. |
App.Unavailable.NotProcessing | 2031 | The application is not in the full data import process. |
App.CountExceeded | 2033 | The number of application versions exceeds the limit. If you select "Reimport Data and Rebuild Index", the offline application is changed. This error is reported if an offline application already exists in the current instance. In this case, delete the existing offline application and then trigger the operation again. Important After an offline application is deleted, its data cannot be recovered. Proceed with caution. |
App.Forbidden.Modify | 2035 | The application cannot be modified. |
App.Forbidden.Modify | 2036 | The application cannot be modified. |
AppGroup.Duplicated | 2038 | The application group already exists. |
AppGroup.NotFound | 2039 | The application group does not exist. |
App.Forbidden.StatusAbnormal | 2040 | The application status is abnormal. Try again later. |
App.Forbidden.Creation | 2041 | This region is invalid. You cannot create new applications. |
App.InvalidParameter.SortBy | 2050 | The sort_by parameter is invalid. |
AppGroup.Forbidden.Removing | 2060 | The application is being deleted. |
AppGroup.Forbidden.HasApps | 2061 | Delete all versions before you try to delete the application. |
AppGroup.Forbidden.OperationInProgress | 2098 | The application configuration is being updated. Try again later. |
App.NotFound | 8003 | The application does not exist. |
21XX: Fine sort errors
Error code | Error code (legacy) | Error message |
Formula.NotFound | 2101 | The expression does not exist. |
Formula.Duplicated | 2102 | The expression name is already in use. |
Formula.CountExceeded | 2103 | The number of expressions of the application exceeds the limit. |
Formula.InvalidParameter.Name | 2104 | The expression name is invalid. The expression name must start with a letter and can contain digits, letters, and underscores (_). It can be up to 30 characters in length. |
Formula.InvalidParameter.NameEmpty | 2105 | The expression name is empty. |
Formula.InvalidParameter.Meta | 2109 | The expression format is invalid. |
Formula.OutOfRange.MetaLength | 2110 | The expression length exceeds the limit. |
Formula.InvalidParameter.Meta | 2112 | The expression format is invalid. |
Formula.InvalidParameter.MetaEmpty | 2113 | The expression format is empty. |
22XX: Rough sort errors
Error code | Error code (legacy) | Error message |
Formula.InvalidParameter.NameEmpty | 2201 | The rough sort configuration name is not specified. |
Formula.Duplicated | 2202 | The rough sort configuration name already exists. |
Formula.CountExceeded | 2203 | The number of rough sort configurations exceeds the limit. |
Formula.InvalidParameter.Name | 2204 | The rough sort configuration name is invalid. The rough sort configuration name must start with a letter and can contain digits, letters, and underscores (_). It can be up to 30 characters in length. |
Formula.OutOfRange.NameLength | 2205 | The length of the rough sort configuration name exceeds the limit. |
Formula.InvalidParameter.AttributeType | 2206 | Rough sort fields must be filterable fields of a numeric type. |
Formula.NotFound | 2207 | The rough sort configuration does not exist. |
Formula.InvalidParameter.AttributeTypeEmpty | 2208 | The rough sort configuration is invalid. It must contain fields. |
Formula.InvalidParameter.Weight | 2209 | The weight of the rough sort configuration is invalid. The weight must be a non-zero value from -100000 to 100000. Floating-point numbers support a precision of up to 6 digits. |
Formula.InvalidParameter.FieldType | 2211 | Function parameters must be filterable fields of the INT type. (The parameters of normalize can be of the INT, FLOAT, or DOUBLE type.) |
Formula.InvalidParameter.RedundantArguments | 2212 | The function must not contain parameters. |
23XX: Query analyzer errors
Error code | Error code (legacy) | Error message |
QueryProcessor.Duplicated | 2300 | The query analysis rule name already exists. |
QueryProcessor.Duplicated.IndexName | 2301 | The index fields of the query analysis rule conflict. |
QueryProcessor.OutOfRange.NameLength | 2303 | The query analysis rule name is too long. |
QueryProcessor.NotFound | 2307 | The specified query analysis rule is not found. |
QueryProcessor.InvalidParameter.Format | 2308 | The format of the feature item does not meet the specifications. |
QueryProcessor.CountExceeded | 2309 | Currently, only 3 query analysis rules can be brought online. |
QueryProcessor.InvalidParameter.Name | 2312 | The query analysis name is invalid. |
QueryProcessor.InvalidParameter.Index | 2313 | The query analysis field is invalid. |
QueryProcessor.NotFound.Domain | 2315 | The industry type of query analysis is not supported. |
QueryProcessor.NotFound.Domain | 2316 | The industry type does not match the analyzer in the index. |
QueryProcessor.InvalidParameter.DomainIndexesMismatch | 2317 | The industry type does not match the query analyzer. |
QueryProcessor.InvalidParameter.DomainProcessorsMismatch | 2318 | The training field is not in the index. |
QueryProcessor.InvalidParameter.DomainIndexesMismatch | 2319 | An analyzer must be configured for the index to which the named entity recognition (NER) query analyzer is applied. |
QueryProcessor.InvalidParameter.AnalyzerMismatch | 2320 | The analyzer configured in the intervention dictionary of the NER query analyzer must be the same as the analyzer in the index. |
24XX: Drop-down suggestion errors
Error code | Error code (legacy) | Error message |
Suggestion.CountExceeded | 2402 | The number of drop-down suggestions exceeds the maximum limit. |
Suggestion.InvalidParameter.IdEmpty | 2403 | The drop-down suggestion ID is not provided. |
Suggestion.InvalidParameter.Name | 2405 | The drop-down suggestion name is invalid. The name can contain only digits, letters, and underscores (_), must start with a lowercase letter, can be up to 16 characters in length, and must be unique. |
Suggestion.InvalidParameter.WhiteList | 2407 | The recommended entries of the drop-down suggestion are invalid. |
Suggestion.InvalidParameter.BlackList | 2408 | The blacklist of the drop-down suggestion is invalid. |
Suggestion.CountExceeded.Id | 2411 | The application ID is not provided in the drop-down suggestion. |
Suggestion.InvalidParameter.Field | 2418 | The drop-down suggestion field is invalid. |
Suggestion.Duplicated.Ownership | 2426 | A drop-down suggestion cannot belong to multiple applications. |
Suggestion.OperationFailed.Creation | 2427 | Failed to create the drop-down suggestion: the quota cannot be registered. |
Suggestion.OperationFailed.Deletion | 2428 | Failed to delete the drop-down suggestion: the quota cannot be deleted. |
Suggestion.InvalidParameter.Quota | 2429 | The drop-down suggestion quota is invalid. |
25XX: Summary errors
Error code | Error code (legacy) | Error message |
Summary.Empty.Field | 2501 | The summary configuration field does not exist. |
Summary.InvalidParameter.FieldType | 2502 | Summaries can be configured only for fields of the TEXT and SHORT_TEXT types. |
Summary.OutOfRange.Length | 2503 | The summary len setting must be an integer from 1 to 300. |
Summary.InvalidParameter.Snippet | 2504 | The summary snippet setting must be an integer from 1 to 5. |
Suggestion.NotFound | 2551 | The corresponding drop-down suggestion is not found. |
26XX: Display field errors
Error code | Error code (legacy) | Error message |
FetchField.Empty | 2601 | fetch fields is not set. |
FetchField.InvalidParameter | 2602 | The fetch fields parameter is invalid. |
27XX: Algorithm errors (legacy)
Error code | Error code (legacy) | Error message |
Algorithm.NotFound | 2701 | The algorithm does not exist. |
Algorithm.InvalidParameter.Type | 2702 | The algorithm type is invalid. |
Algorithm.InvalidParameter.DataSourceClickLog | 2704 | The click log parameters are invalid. |
Algorithm.InvalidParameter.DataSourceTrainingField | 2706 | The training field is invalid. |
Algorithm.Unavailable | 2707 | The algorithm is unavailable. |
Algorithm.Duplicated | 2708 | The algorithm already exists. |
Algorithm.NotFound.Model | 2709 | The algorithm model does not exist. |
Algorithm.TaskUnfinished | 2710 | The algorithm task has not ended. |
Algorithm.Unavailable.Model | 2711 | No models are available. |
Algorithm.Unavailable.App | 2712 | The application does not meet the algorithm requirements. |
30XX: Document push validation errors
Error code | Error code (legacy) | Error message |
Document.Empty | 3001 | The document cannot be empty. |
Document.OutOfRange.DocSize | 3002 | The document size exceeds the limit. |
Document.InvalidParameter.Cmd | 3006 | The document operation type (CMD) is invalid. |
Throttling.User | 3007 | Requests are too frequent. |
Document.OutOfRange.TotalLength | 3008 | The total size of documents exceeds the limit. |
Document.OutOfRange.DocCount | 3010 | The number of documents is invalid. |
DataCollection.Forbidden | 3011 | Pushing documents is not supported. |
Document.InvalidParameter | 8004 | Invalid parameter. |
4XXX: Signature and RAM user authentication errors
Error code | Error code (legacy) | Error message |
SignatureDoesNotMatch | 4001 | Authentication failed. |
IncompleteSignature | 4002 | The signature (sign) cannot be empty. |
SignatureDoesNotMatch | 4003 | Failed to verify the signature (sign). |
SignatureNonceEmpty | 4004 | The nonce is empty. |
SignatureNonceUsed | 4005 | The nonce cannot be reused. |
SignatureNonceInvalid | 4006 | Failed to verify the nonce. |
InvalidParameter.RequestBody | 4007 | Failed to parse the JSON content. The content is not in a valid JSON format. |
InvalidParameter.UserName.Empty | 4008 | The username cannot be empty. Check whether the domain name is correct. |
InvalidParameter.ClientId.Empty | 4009 | The user ID (client_id) is not specified. |
InvalidParameter.Timestamp.Expired | 4010 | The time has expired. |
Table.NotFound | 4012 | The data table does not exist. |
InvalidParameter.Timestamp.Format | 4013 | The timestamp format is invalid. |
InvalidParameter.Timestamp.Empty | 4014 | The Timestamp parameter is not set. |
InvalidParameter.AccessKeyId.Empty | 4015 | No ACCESS KEY is provided. |
Authorization.Empty | 4016 | AUTHORIZATION is not set in the header. |
OutOfRange.RequestBodySize | 4017 | The request body is too long. |
InvalidParameter.RequestBody | 4018 | The format of the request body is invalid. |
Ram.Forbidden.NoPermission | 4020 | RAM user authentication failed. |
Ram.Forbidden.SubAccount | 4021 | This request does not support RAM users. |
Ram.Forbidden.SubAccount | 4022 | The current region does not support operations by RAM users. |
Ram.InternalError.AssumeRole | 4503 | Failed to assume the RAM role. Create the following roles: AliyunOpenSearchDefaultRole and AliyunDTSDefaultRole. |
5XXX: User-related errors
Error code | Error code (legacy) | Error message |
User.NotFound | 5001 | The user does not exist. |
User.InvalidParameter.UserNameMismatch | 5002 | The username is incorrect. |
User.Unavailable | 5004 | The user has not paid. |
User.Unavailable | 5005 | The user has not activated the service. |
User.Unavailable | 5006 | The service is frozen due to overdue payments. |
User.NoAccessKey | 5008 | The user has not enabled an ACCESSKEY. |
User.NotFound | 5009 | The user has been deleted. |
User.AccessKeyDisabled | 5010 | The ACCESSKEY has been disabled. |
User.Duplicated | 5011 | Multiple users are obtained based on the email address. |
User.InvalidParameter.AliyunUserId | 5012 | The Alibaba Cloud ID is invalid. |
User.InvalidParameter.AliyunBid | 5013 | The Alibaba Cloud BID is invalid. |
User.InvalidParameter.ClientId | 5014 | The Alibaba Cloud ClientID is invalid. |
User.InvalidParameter.Id | 5015 | The ID is invalid. |
User.InternalError | 5016 | Failed to delete the ACCESSKEY. |
User.Unavailable.RegionMismatch | 5100 | The user does not have permissions to perform operations in this region. |
User.Unavailable.LabelMismatch | 5101 | The tag of the user account does not belong to the current region. |
9XXX: Application schema errors
Error code | Error code (legacy) | Error message |
Schema.InvalidParameter | 9008 | Invalid data. |
Schema.InvalidParameter | 9009 | Invalid data. |
Schema.InvalidParameter.ReservedWord | 9010 | Reserved words cannot be used. |
Schema.FieldName.Duplicated | 9011 | The field already exists. |
Schema.InvalidParameter.FieldType | 9012 | Invalid type. |
Schema.InvalidParameter.PkType | 9014 | Invalid type. |
Schema.Pk.NotFound | 9015 | No primary key is specified in the template. |
Schema.OutOfRange.PkCount | 9016 | Duplicate primary keys exist in the template. |
Schema.OutOfRange.PackIndexCount | 9019 | The composite index contains too many fields. |
Schema.OutOfRange.OneFieldIndexCount | 9020 | Too many single fields. |
Schema.InvalidParameter.Name | 9021 | The name format is invalid. |
Schema.JoinMap.Duplicated | 9022 | The table is already joined. |
Schema.InvalidParameter.FilterType | 9024 | The filter type is invalid. |
Schema.NotAllTablesBeingUsed | 9102 | Unused tables exist. |
Schema.InvalidParameter.ForeignKey | 9103 | Invalid foreign key. |
Schema.InvalidParameter.FieldTypeForJoin | 9104 | Invalid join. |
Schema.OutOfRange.SubTableCount | 9106 | The number of secondary tables exceeds the system limit. |
Schema.Forbidden.Modify | 9503 | The field cannot be modified. |
Schema.InvalidParameter.FieldTypeForRangeIndex | 9505 | Range indexes support only some field types. |
Schema.OutOfRange.RangeIndexCount | 9506 | Too many composite indexes. |
AppGroup.Quota.InternalError | 9601 | A system error occurred. |
Plugin.InvalidParameter | 9902 | The data source plug-in settings are invalid. |
Plugin.NotFound | 9903 | The plug-in is not found. |
101XX: Scheduled task errors
Error code | Error code (legacy) | Error message |
Task.Duplicated | 10100 | The task is running. Operations are not allowed. |
Task.InvalidParameter.Action | 10102 | Failed to create the task. The action does not exist or is not within the specified range. |
Task.NotFound.TableName | 10105 | Failed to create the task. No table name is specified. |
Task.NotFound | 10107 | The specified task ID is not found. |
Task.InvalidParameter.ModuleName | 10108 | The module name that is passed in when the task status is reported is not within the specified range. |
Task.InvalidParameter.Status | 10109 | The status that is passed in when the task status is reported is not within the specified range. |
Task.Forbidden.Execute | 10110 | The task is already in the completed state when its status is reported. |
Task.InvalidParameter | 10111 | Specify the parameter name and value for the query. |
Task.InvalidParameter.Field | 10113 | The data cleanup field is invalid or not specified. |
Task.InvalidParameter.Days | 10114 | The number of days is invalid. The value must be from 7 to 180 days. |
Task.InvalidParameter.DateType | 10115 | The date type is invalid. |
Task.AbnormalStatus | 10116 | The status value is invalid. |
Task.InvalidParameter.Status | 10117 | The data cleanup type is invalid. |
Task.InvalidParameter.Category | 10118 | The task category is invalid. |
Task.InvalidParameter.Cron | 10119 | The task parameters are invalid. |
Task.NotFound | 10600 | The task does not exist. |
Task.NotFound.AppGroup | 10601 | The app_group task parameter is incorrectly configured. |
102XX: Quota errors
Error code | Error code (legacy) | Error message |
Quota.OutOfRange.Qps | 10203 | The QPS must be an integer greater than 6. |
Quota.OutOfRange.DocSize | 10204 | The document size must be within a fixed range. Unit: GB. |
Quota.InvalidParameter.DocSizeLessThanUsed | 10207 | The requested quota cannot be less than the size of documents that are actually used. |
Quota.InvalidParameter.DowngradeToJunior | 10208 | Paid applications cannot be changed to free applications. |
Quota.WorkingInProgress | 10209 | You cannot specify quota information when you create a new application version. |
Quota.NotFound | 10210 | The quota information is not set. |
Quota.InvalidParameter.Type | 10211 | The quota type is invalid. |
Quota.OutOfRange.QuoaReviewTaskCount | 10212 | No more than 1 Quota approval task can be running. |
Quota.Forbidden | 10213 | You can perform operations only on Quota approval tasks that are being approved. |
Quota.InvalidParameter.Spec | 10214 | The current region does not support this specification. |
Quota.InvalidParameter | 10215 | The quota settings are invalid. |
Quota.OperationFailed.Produce | 10217 | Resources of this specification cannot be provisioned. |
Quota.OutOfRange.ComputeResource | 20216 | The computing resources must be within a fixed range. |
103XX - 105XX: Data source errors
Error code | Error code (legacy) | Error message |
DataSource.NotFound.TddlGroupKey | 10001 | The tddl group key is not specified or is incorrect. Failed to obtain the tddl information. |
DataSource.Unavailable | 10002 | The data source is unavailable. |
DataSource.NotFound.TddlAppName | 10003 | The db_app_name is not specified or is incorrect. |
DataSource.InvalidParameter | 10010 | The data source configuration is invalid. |
DataSource.InvalidParameter.Type | 10014 | The data source type is invalid. |
DataSource.InvalidParameter.Meta | 10015 | Invalid data. |
DataSource.Duplicated | 10016 | The data source already exists. |
App.InvalidParameter | 10301 | Invalid parameter: The parameter is not provided or is in an invalid format. |
Task.InvalidParameter.TimeValue | 10302 | The cycle, date, or time exceeds the size limit or does not meet the specifications. |
DataSource.InvalidParameter | 10303 | No data source is configured. Data cannot be imported. |
Task.Duplicated | 10309 | An unfinished task exists. Do not add the task again. |
App.Unavailable | 10310 | The application is unavailable. |
AppGroup.InvalidParameter.TimeRange | 10311 | The time range of error logs is invalid. |
DataSource.InvalidParameter.Type | 10316 | The data source type is not supported. |
DataSource.InvalidParameter | 10330 | Invalid parameter. |
DataSource.NoPermission.Odps | 10351 | You do not have permissions on the ODPS service. |
DataSource.InvalidParameter.OdpsPartitionFilter | 10352 | The syntax of the ODPS partition condition is invalid. |
DataSource.InvalidParameter.OdpsPartitionFieldNotFound | 10353 | The ODPS partition field does not exist. |
DataSource.InvalidParameter.OdpsTableNotFound | 10354 | The table does not exist in this project. |
DataSource.InvalidParameter.OdpsDonePrefix | 10355 | The format of the ODPS done file prefix is invalid. |
DataSource.InvalidParameter.OdpsTimestamp | 10356 | The timestamp field is not specified or is beyond the 7-day range. |
DataSource.NotFound.RdsInstance | 10364 | The current user does not have this instance (cluster) in the current region. |
DataSource.NotFound.RdsTable | 10366 | The table does not exist in the current database. |
DataSource.OperationFailed.RdsConnect | 10367 | Failed to connect to the database service. |
DataSource.OperationFailed.RdsConnect | 10368 | Failed to connect to the database. |
DataSource.Unsupported.RdsDbType | 10369 | The compatible database type is not supported. |
DataSource.OperationFailed.RdsSetIpWhiteList | 10370 | Failed to configure the IP address whitelist of RDS. |
DataSource.OperationFailed.RdsIpNotInWhiteList | 10371 | The IP address is not in the IP address whitelist of RDS. |
DataSource.Unsupported.RdsInstanceType | 10372 | Only primary instances can be configured. |
DataSource.Unsupported.RdsInstanceVersion | 10373 | The MySQL version of this instance is not supported. |
DataSource.Unsupported.RdsInstanceClassType | 10374 | Only dedicated instances can be configured. |
DataSource.OperationFailed.Vpc | 10375 | RDS failed to obtain the VPC configuration. |
DataSource.Forbidden.RdsSetIpWhiteList | 10377 | The RAM user is not authorized to access the IP address whitelist groups of RDS. |
DataSource.Unsupported.RdsNetworkType | 10379 | Unsupported RDS network type |
DataSource.OperationFailed.VpcAccessConfigPending | 10380 | The VPC authorization configuration is taking effect. Try again later. |
DataSource.OperationFailed.VpcServerConfigPending | 10381 | The VPC server configuration is taking effect. Try again later. |
NotFound.Field | 10450 | The field does not exist |
DataSource.Unsupported.DrdsDbType | 10451 | Unsupported instance type. Only RDS databases are supported. |
UserCluster.NotFound | 10502 | Unavailable cluster name |
UserCluster.Unsupported.Type | 10503 | Invalid cluster type |
RouteField.Unsupported.FieldType | 10504 | Invalid partition field type |
UserCluster.Unsupported.AppType | 10506 | The Advanced Edition does not support cluster settings |
RouteField.Unsupported | 10507 | This cluster does not support field routing |
Quota.Forbidden.UpdateTps | 10508 | You do not have permissions to update the TPS |
Quota.Forbidden.UpdateTps | 10509 | The Advanced Edition does not support TPS |
UserCluster.InvalidParameter.NameEmpty | 10510 | The cluster name cannot be empty |
UserCluster.Duplicated | 10512 | A cluster with the same name already exists for this user |
UserCluster.InvalidParameter.Name | 10513 | Invalid logical cluster name. The name must start with a letter, can contain digits, letters, and underscores (_), and can be up to 50 characters in length. |
UserCluster.InvalidParameter.AliasEmpty | 10514 | The physical cluster name cannot be empty |
UserCluster.InvalidParameter.Alias | 10515 | Invalid physical cluster name. The name must start with a letter, can contain digits, letters, and underscores (_), and can be up to 50 characters in length. |
UserCluster.InvalidParameter.RouteFieldEmpty | 10516 | A routing field must be specified when a grouping cluster is specified |
RouteField.InvalidParameter.GroupEmpty | 10517 | A grouping cluster must be specified when a routing field is specified |
RouteField.Unsupported.AppType | 10518 | The Advanced Edition does not support route field settings |
DataSource.Unsupported.PolarDbInstanceVersion | 10519 | Only MySQL 5.6 databases are supported |
DataSource.PolarDbBinlogDisabled | 10520 | Binlog is unavailable |
107XX: Custom analyzer errors
Error code | (Legacy) error code | Error message |
UserAnalyzer.NotFound | 10700 | The custom analyzer does not exist |
UserAnalyzer.Forbidden.ModifyDictionary | 10701 | The dictionary cannot be modified |
UserAnalyzer.OperationFailed.Remove | 10702 | The custom analyzer is referenced by an application and cannot be deleted |
UserAnalyzer.OutOfRange.Count | 10703 | The number of custom analyzers exceeds the system limit |
UserAnalyzer.InvalidParameter.NoEntries | 10704 | The custom analyzer must contain entries |
UserAnalyzer.OutOfRange.EntryCount | 10705 | The number of custom analyzer entries cannot exceed the system limit |
UserAnalyzer.InvalidParameter.Entry | 10706 | Custom analyzer entries cannot contain uppercase letters, full-width symbols, or Chinese punctuation marks |
UserAnalyzer.InvalidParameter.EntryKey | 10707 | The key of a custom analyzer entry cannot be empty, cannot contain spaces, and must be less than 10 characters in length |
UserAnalyzer.Duplicated.EntryKey | 10708 | The keys of custom analyzer entries must be unique |
UserAnalyzer.InvalidParameter.EntryKeyReserved | 10709 | The key of a custom analyzer entry cannot be the same as a system default value |
UserAnalyzer.InvalidParameter.EntryKeyInValue | 10710 | The key of a custom analyzer entry cannot appear in the value of the entry |
UserAnalyzer.InvalidParameter.EntryValue | 10711 | The value of a custom analyzer entry cannot be empty and must be less than 32 characters in length |
UserAnalyzer.InvalidParameter.EntryValueReserved | 10712 | The value of a custom analyzer entry cannot be the same as a system default value |
UserAnalyzer.InvalidParameter.Name | 10713 | The custom analyzer name must start with a letter, can contain letters, digits, and underscores (_), and must be less than 30 characters in length |
UserAnalyzer.InvalidParameter.NameReserved | 10714 | The custom analyzer name cannot be the same as the name of a system analyzer |
UserAnalyzer.InvalidParameter.Business | 10715 | Invalid base analyzer type for the custom analyzer |
UserAnalyzer.InvalidParameter.KeyValueMismatch | 10716 | The key and value of an entry in the custom analyzer tokenization dictionary must be identical after spaces are removed |
UserAnalyzer.InvalidParameter.Type | 10717 | Invalid custom analyzer dictionary type |
UserAnalyzer.OperationFailed.Remove | 10718 | The custom analyzer is referenced by an intervention dictionary and cannot be deleted |
AppGroup.InvalidParameter.MetricType | 10719 | Invalid application report metric type |
11XXX: A/B testing errors
Error code | (Legacy) error code | Error message |
ABTest.NotFound | 11001 | The scenario does not exist |
ABTest.NotFound.Group | 11002 | The test group does not exist |
ABTest.NotFound.Experiment | 11003 | The test does not exist |
ABTest.InvalidParameter | 11004 | Invalid test parameter |
ABTest.OutOfRange.SceneCount | 11007 | The number of scenarios exceeds the upper limit |
ABTest.OutOfRange.GroupCount | 11008 | The number of test groups exceeds the upper limit |
ABTest.OutOfRange.ExperimentCount | 11009 | The number of tests exceeds the upper limit |
UserAnalyzer.OutOfRange.AliasLength | 11010 | The test name exceeds 30 characters in length |
ABTest.OutOfRange.Traffic | 11011 | The test traffic exceeds 100% |
ABTest.Duplicated.Condition | 11012 | Duplicate test scenario tags are not allowed |
ABTest.InvalidParameter.ConditionEmpty | 11013 | The test scenario tag cannot be empty |
ABTest.OutOfRange.ConditionCount | 11014 | The number of test scenario tags exceeds the limit |
ABTest.InvalidParameter.ConditionValue | 11015 | Invalid test scenario tag name |
ABTest.InvalidParameter.ConditionDefault | 11016 | The default scenario tag cannot coexist with other tags |
ABTest.InvalidParameter.Traffic | 11017 | The online test traffic must be between 1 and 100 |
12XXX: Data collection errors
Error code | (Legacy) error code | Error message |
DataCollection.NotFound | 12001 | The data collection does not exist |
DataCollection.InvalidParameter.FieldEmpty | 12002 | Required fields are missing from the data collection push |
DataCollection.InvalidParameter.FieldType | 12003 | Invalid field type in the data collection push |
DataCollection.InvalidParameter.FieldValue | 12004 | Invalid field value in the data collection push |
DataCollection.Unavailable | 12005 | Server-side data collection is not enabled |
13XXX: Intervention dictionary errors
Error code | (Legacy) error code | Error message |
Intervention.Unsupported | 13001 | The intervention service is not yet available in this region |
Intervention.NotFound.Dictionary | 13002 | The intervention dictionary does not exist |
Intervention.InvalidParameter.Type | 13004 | This dictionary type is not yet supported |
Intervention.InvalidParameter.TypeMismatch | 13006 | The dictionary type does not match |
Intervention.OperationFailed.Remove | 13007 | The dictionary is in use |
Intervention.Duplicated.Dictionary | 13008 | A dictionary with the same name already exists |
Intervention.OutOfRange.DictionaryCount | 13009 | The maximum number of dictionaries has been reached |
Intervention.InvalidParameter.Empty | 13010 | The parameter is empty |
Intervention.Duplicated.FieldValue | 13111 | A synonym and a blocked word cannot be the same |
Intervention.Duplicated.ConfigItem | 13112 | The total number of added synonyms and blocked synonyms cannot exceed 5 |
Intervention.Unsupported.AppType | 13113 | Only new Advanced Edition applications can be configured with intervention dictionaries |
Intervention.Unsupported.NerTag | 13120 | Unrecognized entity recognition type |
14XXX: Optimization Master errors
Error code | (Legacy) error code | Error message |
Optimizer.Unsupported | 14101 | Optimization Master - Slow query analysis is not yet available in this region |
Optimizer.InvalidParameter.SameDay | 14102 | Only analysis results within one day can be queried |
Optimizer.OperationFailed.PvLogNotReady | 14104 | Query logs are not yet ready |
15XXX: Billing and purchase errors
Error code | (Legacy) error code | Error message |
Sale.NotFound.CommodityCode | 15004 | Unrecognized commodity code |
Sale.NotFound.ChargeType | 15005 | Unrecognized billing method |
Sale.NotFound.OrderType | 15006 | Unrecognized order type |
Sale.OperationFailed.Remove | 15007 | Subscription applications cannot be deleted |
Sale.Duplicated.InstanceId | 15008 | The instance ID already exists |
Sale.WorkingInProgress.Order | 15009 | The instance has unprocessed orders |
Sale.NotFound.PricingCycle | 15010 | Unrecognized subscription period unit |
Sale.OperationFailed.Upgrade | 15011 | Failed to change the specifications |
Sale.OperationFailed.ChargingWayMismatch | 15012 | Switch to the new billing model first |
Sale.OperationFailed.ServiceTypedOnly | 15013 | Only service-based applications can be converted to instance-based applications |
Sale.OperationFailed.HasQuotaReview | 15014 | The instance has a quota approval ticket |
Sale.NotFound.PricingPlanResult | 15103 | The specified specifications cannot be priced |
16XXX: Algorithm platform errors
Error code | (Legacy) error code | Error message |
Algorithm.Forbidden.AlreadyConfigured | 16001 | Duplicate configuration is not allowed |
Algorithm.Throttling | 16002 | Calls are too frequent |
Algorithm.InvalidParameter.Scene | 16004 | Unrecognized scenario |
Algorithm.NotFound.Deployment | 16104 | The algorithm deployment does not exist |
Algorithm.Forbidden.PredictionNotReady | 16105 | Model prediction is not yet complete |
Algorithm.Forbidden.PredictionInService | 16106 | A model cannot be deployed repeatedly |
Algorithm.Forbidden.PredictionOffline | 16107 | A model prediction cannot be deleted repeatedly |
Algorithm.InvalidParameter.EmptyModels | 16108 | An algorithm deployment must contain at least one model |
Algorithm.WorkingInProgress.PrevDeployment | 16109 | The previous algorithm deployment has not been processed yet |
Algorithm.OperationFailed.DeploymentInService | 16110 | The algorithm deployment is in use |
Algorithm.Forbidden.PredictionFailed | 16111 | Model prediction failed |
Algorithm.OperationFailed.DeploymentExpired | 16112 | The algorithm deployment has expired |
Algorithm.Unsupported.AppSpec | 16113 | The algorithm deployment is restricted by the application specifications |
Algorithm.Duplicated.Project | 16201 | A project with the same name already exists |
Algorithm.NotFound.Project | 16204 | The algorithm project does not exist |
Algorithm.InvalidParameter.EmptyDataSources | 16206 | No data source information has been specified for the algorithm project |
Algorithm.OperationFailed.ModelInService | 16207 | A model in the algorithm project has been deployed. Invalidate the deployment before you delete the project. |
Algorithm.CountExceeded.Project | 16208 | The maximum number of algorithm projects has been reached |
Algorithm.InvalidParameter.Type | 16209 | Invalid algorithm project type |
Algorithm.Duplicated.Model | 16301 | A model with the same name already exists |
Algorithm.NotFound.Model | 16304 | The algorithm model does not exist |
Algorithm.InvalidParameter.Preprocessors | 16305 | Preprocessing rules cannot be configured for the primary key |
Algorithm.NotFound.FieldPk | 16306 | Specify the primary key field |
Algorithm.WorkingInProgress.Training | 16307 | The algorithm model has not finished training |
Algorithm.WorkingInProgress.Preprocessing | 16308 | The algorithm model has not finished preprocessing |
Algorithm.Forbidden.Update | 16309 | The algorithm model cannot be modified at the moment |
Algorithm.CountExceeded.Model | 16310 | The maximum number of algorithm models has been reached |
Algorithm.OperationFailed.DeployedOnDifferentScene | 16311 | The algorithm model has been deployed in different scenarios |
Algorithm.OperationFailed.AlreadyUsed | 16312 | The algorithm model is configured in a sort expression and cannot be deleted by any means |
Algorithm.OperationFailed.Preprocessing | 16313 | The preprocessing stage of the algorithm model failed |
Algorithm.InvalidParameter.FieldType | 16314 | Invalid field type |
Algorithm.InvalidParameter.AppFieldType | 16315 | Invalid field role |
Algorithm.InvalidParameter.CateIdEmpty | 16316 | Specify the category ID field |
Algorithm.InvalidParameter.ItemTitleEmpty | 16317 | Specify the item title field |
Algorithm.InvalidParameter.SameWithPk | 16318 | A model field duplicates the primary key |
Algorithm.Forbidden.Model | 16319 | The model operation is not allowed |
Algorithm.InvalidParameter.AppFieldValueType | 16320 | Model fields cannot be multi-value fields |
Algorithm.InvalidParameter.Behavior | 16404 | Unrecognized behavior data source |
Algorithm.OperationFailed.DataSourceValidation | 16405 | Data source verification failed |
Algorithm.OperationFailed.Deploy | 16501 | Prediction deployment failed |
Algorithm.InvalidParameter.EmptyDataProcessorConfig | 16601 | An unsupported rule configuration is used |
Algorithm.InvalidParameter.DataProcessorEmpty | 16602 | The feature transformation cannot be empty |
Algorithm.InvalidParameter.DataProcessor | 16604 | An unsupported preprocessing rule or feature transformation is used |
Others
Error code | (Legacy) error code | Error message |
Unsupported | 99999 | This operation is not allowed |