Public error codes
Updated at:
Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 400 | AccessPointInvalid | The access point is invalid. | The access point is invalid. | |
| 400 | ACL.InvalidType | The specified ACL type is invalid. | The ACL type is invalid. | |
| 400 | ACL.NoSupportWanType | An SAG 1000 device does not support a WAN ACL. | SAG-1000 devices do not support Internet ACLs. | |
| 403 | AclAmountLimit | No more ACL can be created. You can open a ticket to increase the quota of ACLs. | You have reached the quota for ACL instances. Submit a ticket to request a quota increase. | |
| 403 | AclPerSmartagAmountLimit | No more ACL can be associated with this smart access gateway. | The number of ACL groups associated with the Smart Access Gateway instance has reached the quota. | |
| 403 | AcrPerAclAmountLimit | The maximum number of rules in an ACL is exceeded. You can open a ticket to increase the quota. | The number of ACL rules you created has exceeded the quota for a single ACL group. Submit a ticket to request a quota increase. | |
| 400 | ActionNotSupport | The specified instance does not support this action. | The current instance does not support this feature. | |
| 400 | AlreadyBound.CCN | The specified SAG instance is bound to another CCN instance. Unbind them first. | The current SAG instance is already associated with another CCN instance. Disassociate it first. | |
| 403 | AlreadyBound.CEN | This instance has been bound, please unbind first. | The instance is already associated with a CEN instance. Disassociate it first. | |
| 403 | AlreadyBound.SMARTAG | This instance has been bound, please unbind smart access gateway first. | The instance is already associated with a Smart Access Gateway instance. Disassociate it first. | |
| 400 | Bandwidth.InvalidId | The specified bandwidth instance ID is invalid. | The bandwidth instance ID is invalid. | |
| 400 | Box.ExistSN | The specified SN already exists. | The serial number already exists. | |
| 400 | Box.InvalidId | The specified SAG device ID is invalid. | The Smart Access Gateway device is invalid. | |
| 400 | Box.InvalidSN | The specified SN is invalid. | The serial number is invalid. | |
| 400 | CCN.CidrAmountLimit | The maximum number of CCN CIDR blocks is exceeded. | The number of CIDR blocks in the Cloud Connect Network (CCN) has exceeded the limit. | |
| 400 | CCN.CidrEmpty | You must specify the CCN CIDR block. | The CIDR block of the Cloud Connect Network (CCN) is empty. | |
| 400 | CCN.CidrInUse | The specified CCN CIDR block is being used. | The CIDR block of the Cloud Connect Network (CCN) is already in use. | |
| 400 | CCN.InvalidCidr | The specified CCN CIDR block is invalid. | The CIDR block of the Cloud Connect Network (CCN) is invalid. | |
| 400 | CCN.InvalidId | You must specify the CCN instance ID. | The Cloud Connect Network (CCN) instance ID does not exist. | |
| 400 | CCN.InvalidInterworkingStatus | The specified connection status is invalid. Specify the connection status to enable or disable. | The interconnection status is invalid. | |
| 400 | CCN.InvalidSnatCidr | The SNAT CIDR block of CCN is invalid. | The SNAT CIDR block of the Cloud Connect Network (CCN) is invalid. | |
| 400 | CCN.InvalidUid | The specified CCN user ID is invalid. | The Cloud Connect Network (CCN) user ID is invalid. | |
| 400 | CCN.NetworkOptOpened | Public network optimization is enabled for the specified CCN instance. You cannot unbind this CCN instance with the CEN instance. | The current CCN has Internet optimization enabled and cannot be disassociated from the CEN instance. | |
| 400 | CCN.SnatCidrConflict | The specified SNAT CIDR block is invalid. | The specified SNAT CIDR block conflicts with an existing one. | |
| 400 | CCN.SnatCidrInUse | The SNAT CIDR block of the CCN is being used and cannot be changed. | The SNAT CIDR block of the Cloud Connect Network (CCN) is in use and cannot be modified. | |
| 400 | CCN.SnatCidrNoConfig | You must configure the SNAT CIDR block of the CCN. | The SNAT CIDR block of the Cloud Connect Network (CCN) is not configured. | |
| 403 | CcnAmountLimit | The CCNs you created has reached the limit, you can raise the limit by application. | You have reached the quota for Cloud Connect Network (CCN) instances. Submit a ticket to request a quota increase. | |
| 400 | CCN_IS_BOUND | The specified CCN has been bound to a VPC. | The CCN instance is already associated with a VPC. | |
| 400 | CCN_NOT_EXIST | The specified CCN instance does not exist. | The CCN instance does not exist. | |
| 403 | CidrConflict | The subnet CIDR block %s is in conflict with instance %s. Please check your input. | The subnet %s conflicts with the CIDR block of the instance %s. Check your input. | |
| 400 | ClientUser.BandwidthInvalid | The specified Bandwidth is invalid. | The user bandwidth is invalid. | |
| 400 | ClientUser.ClientIpsEmpty | You must specify ClientIp. | The IP address is not specified. | |
| 400 | ClientUser.ClientIpsInvalid | The specified ClientIps is invalid. | The IP address is invalid. | |
| 400 | ClientUser.EmailEmpty | You must specify UserEmail. | The user email address cannot be empty. | |
| 400 | ClientUser.EmailInvalid | The format of the specified UserEmail is invalid. | The format of the user email address is invalid. | |
| 400 | ClientUser.InvalidClientIp | The specified ClientIp is invalid. | The user IP address is invalid. | |
| 400 | ClientUser.InvalidOriginUser | The origin user is invalid. | The source account is invalid. | |
| 400 | ClientUser.IpEmpty | You must specify ClientIp. | The static IP address is not specified. | |
| 400 | ClientUser.IpInvalid | The specified ClientIp is invalid. | The specified static IP address is invalid. | |
| 400 | ClientUser.NameEmpty | You must specify UserName. | The username cannot be empty. | |
| 400 | ClientUser.NameInvalid | The specified UserName is invalid. | The username format is invalid. | |
| 400 | ClientUser.NotSupportAction | You cannot create a user in the current SAG instance. | The current Smart Access Gateway instance does not support creating client users. | |
| 400 | ClientUser.PasswordInvalid | The specified password format is invalid. | The password format is invalid. | |
| 400 | ClientUser.UserExist | The specified user already exists. | The user already exists. | |
| 400 | ClientUser.UserInUsing | The specified SAG user account is already in use this month. You cannot delete it. | The specified user has been used in the current month and cannot be deleted. | |
| 400 | ClientUser.UserOverLimit | The maximum number of users is exceeded. | The number of users has exceeded the limit. | |
| 400 | ConfigSynchronizing | The network configuration is being synchronized. Try again later. | The configuration is being synchronized. Try again later. | |
| 400 | ConfigUnsynchronized | The network configuration is not synchronized. | The network configuration is not synchronized. | |
| 400 | CreateProjectFailed | Failed to create the SLS project. | Failed to create the SLS project. | |
| 400 | DedicatedLineBackupCreateFailed | An error occurred while creating dedicated line backup. | Failed to create the standby connection. | |
| 400 | DefaultEnterpriseCode.NotExist | The specified default enterprise code does not exist. | The default enterprise code does not exist. | |
| 400 | DependencyViolation.FlowLog | This FlowLog instance is bound to an SAG instance. | The flow log has resource dependencies. | |
| 400 | DnatPerSagLimit | The maximum number of DNAT entries in an SAG is exceeded. You can open a ticket to increase the quota. | The maximum number of DNAT entries in an SAG is exceeded. You can open a ticket to increase the quota. | |
| 400 | DnatPerSagLimit | The maximum number of DNAT entries in an SAG is exceeded. | The number of DNAT entries configured for the SAG instance has exceeded the maximum quota. | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The DryRun parameter is enabled, and the request validation passed. | |
| 400 | Duplicated.Cidr | The specified CIDR block already exists. | The specified CIDR block conflicts. | |
| 400 | Duplicated.DestPrefix | The specified DestPrefix already exists. | The destination prefix already exists. | |
| 400 | Duplicated.HcIp | The specified HcIp parameter already exists. | The specified health check IP address conflicts. | |
| 400 | DuplicatedDnatEntry | The specified ExternalIp, IpProtocol, ExternalPort, InternalIp, and InternalPort are duplicated. | The specified external IP address, IP protocol, external port, internal IP address, and internal port conflict. | |
| 400 | DuplicatedGrantRule | The specified privilege granting rule already exists. | The authorization rule already exists. | |
| 400 | DuplicatedParam.%s | The parameter %s is duplicated. | The parameter %s is duplicated. | |
| 400 | ECC.InvalidId | The specified ECC instance does not exist. | The high-speed cloud access instance does not exist. | |
| 400 | EnterpriseCode.AmountLimit | No more enterprise code can be created. You can open a ticket to increase the quota of enterprise codes. | You cannot create an enterprise code. Submit a ticket to increase the quota. | |
| 400 | EnterpriseCode.BeenOccupied | The specified enterprise code is occupied by other enterprises. | The enterprise code is already used by another enterprise. | |
| 400 | EnterpriseCode.BeingUsed | The specified enterprise code is being used. | The enterprise code is in use. | |
| 400 | EnterpriseCode.ConfigDifferent | The enterprise code and the IDaaS configuration of the target SAG must be the same as those of the current SAG. | The enterprise code or IDaaS configuration of the destination Smart Access Gateway instance is different. | |
| 400 | EnterpriseCode.ConfigDifferent | The target smart access gateway enterprise code or idaas configuration is not the same. | The enterprise codes bound to the two SAG instances are inconsistent. | |
| 400 | EnterpriseCode.DeleteLimit | The specified default enterprise code cannot be deleted. | The default enterprise code cannot be deleted. | |
| 400 | EnterpriseCode.NotExist | The specified enterprise code does not exist. | The enterprise code does not exist. | |
| 400 | EnterpriseCode.UserNameConflict | The specified username already exists. | The username conflicts. | |
| 400 | ErrorConfigExist | An error occurred while applying configurations to the device. Synchronize the device configurations to the cloud. | Some configurations failed to be delivered. Synchronize the device configurations to the cloud. | |
| 400 | ExclusiveParam.%sAnd%s | The parameter of %s and %s are mutually exclusive. | The parameters %s and %s are mutually exclusive. | |
| 400 | ExistSameParamTask | Exist task with same params. | A task with the same parameters already exists. | |
| 403 | FeatureNotSupport | The current edition of the smart access gateway does not support this feature. | The current version of the Smart Access Gateway instance does not support this attribute. | |
| 403 | FeatureNotSupportForActiveSmartAG | The current edition of the active smart access gateway does not support this feature. | The current version of the primary Smart Access Gateway instance does not support this attribute. | |
| 403 | FeatureNotSupportForStandBySmartAG | The current edition of the standby smart access gateway does not support this feature. | The current version of the standby Smart Access Gateway instance does not support this attribute. | |
| 400 | Forbbiden.SubUser | You are not authorized to operate on the specified resource. | You do not have the permission to operate on the specified resource. | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | The user does not have the permission to operate on this resource. | |
| 403 | FORBIDDEN.ACTION | You are not authorized to access the current API operation. | You are not authorized to access the current API. | |
| 400 | Forbidden.NotAllowedCategary | You are not authorized to manage the system tags. | You do not have the permission to manage system tags. | |
| 403 | Forbidden.SmartAGUser | Authentication failed. SmartAG user is not authorized to create a reseller instance. | The SmartAG user does not have the permission to create reseller instances. | |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | Duplicate values exist for the tag key. | |
| 400 | Forbidden.TagKeys | You are not authorized to modify or delete the tag key. | You are not authorized to perform operations on the key of the tag. | |
| 400 | Forbidden.TagValue | You are not authorized to modify or delete the tag value. | You are not authorized to perform operations on the value of the tag. | |
| 400 | GetLinkLevelBackupStateFailed | An error occurred while retrieving link-level backup state. | Failed to retrieve the link-level backup status. | |
| 403 | GetSmartAccessGatewayStateError | An error occurred while obtaining the smart access gateway status. | Failed to retrieve the Smart Access Gateway status. | |
| 403 | GetSmartAccessGatewayVersionError | An error occurred while obtaining the smart access gateway version. | Failed to retrieve the Smart Access Gateway version. | |
| 400 | HC.AmountLimit | The maximum number of health check instances is exceeded. | The number of health check instances that you have created exceeds the quota. Submit a quota increase request first. | |
| 400 | HC.AutoGenerated | The health check instance is automatically generated and cannot be modified. | Automatically orchestrated health check instances cannot be modified. | |
| 400 | HC.InstanceNoFound | The specified network health check instance does not exist. | The health check instance does not exist. | |
| 400 | HC.InvalidDescription | The specified description is invalid. | The health check description is invalid. | |
| 400 | HC.InvalidDstIpAddr | The specified destination IP address is invalid. | The health check destination address is invalid. | |
| 400 | HC.InvalidDstPort | The specified destination port is invalid. | The health check destination port is invalid. | |
| 400 | HC.InvalidFailCountThreshold | The maximum number of successive failed probes is exceeded. | The threshold for consecutive health check probe failures is invalid. | |
| 400 | HC.InvalidName | The specified name is invalid. | The health check name is invalid. | |
| 400 | HC.InvalidProbeCount | The specified number of probes is invalid. | The number of health check probes is invalid. | |
| 400 | HC.InvalidProbeInterval | The specified probe interval is invalid. | The health check probe interval is invalid. | |
| 400 | HC.InvalidProbeTimeout | The specified probe timeout period is invalid. | The health check probe timeout period is invalid. | |
| 400 | HC.InvalidRttFailThreshold | The RTT threshold has been triggered too many times. | The trigger count for the health check latency threshold is invalid. | |
| 400 | HC.InvalidRttThreshold | The specified RTT is invalid. | The bidirectional latency for the health check is invalid. | |
| 400 | HC.InvalidSrcIpAddr | The specified source IP address is invalid. | The health check source address is invalid. | |
| 400 | HC.InvalidSrcPort | The specified source port is invalid. | The health check source port is invalid. | |
| 400 | HC.InvalidType | The specified type is invalid. | The health check type is invalid. | |
| 400 | HC.RelatedRoute | The specified health check instance has associated routes and cannot be deleted. | The health check instance is associated with a route and cannot be deleted. | |
| 400 | IdempotenceProcessing | The previous request is being processed. | A previous request is still being processed. | |
| 400 | IdempotenceSignatureMismatch | There is an idempotence signature mismatch between this and the previous request. | The idempotency signature of the current request does not match that of the previous request. | |
| 400 | IllegalParam | The parameter is invalid. | The parameter is invalid. | |
| 400 | IllegalParam.%s | The specified parameter %s is invalid. | The parameter %s is invalid. | |
| 400 | IllegalParam.%s | The parameter %s is illegal. | The parameter %s is invalid. | |
| 400 | IllegalParam.ActiveAging | The specified ActiveAging is invalid. | The ActiveAging parameter is invalid. | |
| 400 | IllegalParam.AddressType | The specified AddressType is invalid. | The AddressType parameter is invalid. | |
| 400 | IllegalParam.AuthenticationType | The specified AuthenticationType is invalid. | The AuthenticationType parameter is invalid. | |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | The Bandwidth parameter is invalid. | |
| 400 | IllegalParam.BoxConfig | The specified BoxConfig is invalid. | The BoxConfig parameter is invalid. | |
| 400 | IllegalParam.Channel | The specified Channel is invalid. | The Channel parameter is invalid. | |
| 400 | IllegalParam.Cidr | The specified CIDR block is invalid. | The cidr parameter is invalid. | |
| 400 | IllegalParam.DestPrefix | The specified DestPrefix is invalid. | The DestPrefix parameter is invalid. | |
| 400 | IllegalParam.EncryptionAlgorithm | The specified EncryptionAlgorithm is invalid. | The EncryptionAlgorithm parameter is invalid. | |
| 400 | IllegalParam.ExpressConnectionInterface | The specified ExpressConnectionInterface parameter is invalid. | The ExpressConnectionInterface parameter is invalid. | |
| 400 | IllegalParam.ExpressConnectionNexthop | The specified ExpressConnectionNexthop parameter is invalid. | The ExpressConnectionNexthop parameter is invalid. | |
| 400 | IllegalParam.Gateway | The specified Gateway is invalid. | The Gateway parameter is invalid. | |
| 400 | IllegalParam.HcIp | The specified HcIp parameter is invalid. | The HcIp parameter is invalid. | |
| 400 | IllegalParam.InactiveAging | The specified InactiveAging is invalid. | The InactiveAging parameter is invalid. | |
| 400 | IllegalParam.IP | The specified Ip is invalid. | The Ip parameter is invalid. | |
| 400 | IllegalParam.LanIp | The specified LanIp is invalid. | The LanIp parameter is invalid. | |
| 400 | IllegalParam.Mask | The specified Mask is invalid. | The Mask parameter is invalid. | |
| 400 | IllegalParam.Mask | The specified mask (%s) is invalid. | The format of the %s mask is incorrect. | |
| 400 | IllegalParam.MasterDns | The specified MasterDns is invalid. | The MasterDns parameter is invalid. | |
| 400 | IllegalParam.NetflowServerIp | The specified NetflowServerIp is invalid. | The NetflowServerIp parameter is invalid. | |
| 400 | IllegalParam.NetflowServerPort | The specified NetflowServerPort is invalid. | The NetflowServerPort parameter is invalid. | |
| 400 | IllegalParam.NetflowVersion | The specified NetflowVersion is invalid. | The NetflowVersion parameter is invalid. | |
| 400 | IllegalParam.Nexthop | The specified Nexthop is invalid. | The Nexthop parameter is invalid. | |
| 400 | IllegalParam.OutputType | The specified OutputType is invalid. | The OutputType parameter is invalid. | |
| 400 | IllegalParam.Password | The specified Password is invalid. | The Password parameter is invalid. | |
| 400 | IllegalParam.RegionId | The specified RegionId is invalid. | The RegionId parameter is invalid. | |
| 400 | IllegalParam.SlaveDns | The specified SlaveDns is invalid. | The SlaveDns parameter is invalid. | |
| 400 | IllegalParam.SlsRegionId | The specified SlsRegionId is invalid. | The SlsRegionId parameter is invalid. | |
| 400 | IllegalParam.Ssid | The specified Ssid is invalid. | The Ssid parameter is invalid. | |
| 400 | IllegalParam.Status | The specified Status parameter is invalid. | The Status parameter is invalid. | |
| 400 | IllegalParam.UserName | The specified UserName is invalid. | The UserName parameter is invalid. | |
| 400 | IllegalParamFormat.%s | The parameter format of %s is invalid. | The format of the %s parameter is invalid. | |
| 400 | IllegalParamLength.%s | The length of parameter %s is invalid. | The length of the %s parameter is invalid. | |
| 400 | IllegalParamSize.%s | The number of the parameter %s is invalid. | The number of %s parameters is invalid. | |
| 403 | IllegalRemoteIp.Conflict | The specified IP address has been used. | The specified IP address is already in use. | |
| 403 | IllegalRemoteIp.RouteTableEntryConflict | The specified IP address conflicts with route table entries. | The specified IP address conflicts with a route table entry. | |
| 400 | IncorrectBusinessStatus.ApplicationBandwidthPackage | The business status of ApplicationBandwidthPackage is incorrect. | The current status of the bandwidth plan for application acceleration is invalid. | |
| 400 | IncorrectStatus | The instance status is invalid. | The instance status is invalid. | |
| 400 | IncorrectStatus.FlowLog | The current FlowLog instance status does not support this operation. | The flow log status is invalid. | |
| 400 | IncorrectStatus.ResellerInstance | The status of reseller instance is incorrect. | The reseller instance status is invalid. | |
| 400 | IncorrectStatus.SagECRouteBackup | The status of the route backup is invalid. | The route backup configuration status does not match. | |
| 400 | IncorrectStatus.SmartAG | The status of SmartAG is incorrect. | The Smart Access Gateway instance status is invalid. | |
| 400 | IncorrectStatus.SmartAGDpi | The DPI status of Smart Access Gateway is invalid. | The deep packet inspection status of the Smart Access Gateway is invalid. | |
| 400 | IncorrectStatus.SN | The current device status does not support this operation. | The specified device does not support this operation. | |
| 501 | InnerServiceFailed | Call inner service failed. | An internal service call failed. | |
| 400 | InstanceExists | The specified instance already exists. | The instance already exists. | |
| 400 | InstanceNotExit | The specified instance does not exist. | The specified instance does not exist. | |
| 403 | InternalError | An internal server error occurred. | An internal service error occurred. | |
| 500 | InternalError | An error occurred while processing your request. | The request failed due to an unknown error. | |
| 400 | Invalid.QosCar.Priority | The specified priority of QosCarId is invalid. | The priority parameter of the specified QoS CAR is invalid. | |
| 400 | InvalidBandwidthCompare | The specified maximum bandwidth is smaller than the minimum bandwidth. Please check your input. | The maximum bandwidth value is less than the minimum bandwidth value. Check your input. | |
| 403 | InvalidCidr | Cidr is illegal, please check your input. | The CIDR block is invalid. Check your input. | |
| 400 | InvalidCidr.NotFound | The specified CIDR block does not exist. | The specified CIDR block was not found. | |
| 403 | InvalidDescription | Description not valid. | The description exceeds the length limit. | |
| 400 | InvalidDescription | The specified description is invalid. | The specified description is invalid. | |
| 400 | InvalidDestPrefix.NotFound | The specified DestPrefix does not exist. | The DestPrefix parameter was not found. | |
| 400 | InvalidFlowLogId.NotFound | The specified FlowLogId does not exist. | No instance was found for the specified FlowLogId. | |
| 400 | InvalidHardwareType | The specified hardware type is invalid. | The specified hardware type is invalid. | |
| 403 | InvalidId.ACL | The specified ACL ID is invalid. | The specified ACL group ID is invalid. | |
| 403 | InvalidId.ACR | The specified ACL rule ID is invalid. | The specified ACL rule ID is invalid. | |
| 403 | InvalidId.CCN | Invalid cloud connect network id. | The specified Cloud Connect Network (CCN) ID is invalid. | |
| 400 | InvalidId.PercentSourceType | The specified PercentSourceType is invalid. | The specified source for percentage bandwidth calculation is invalid. | |
| 400 | InvalidId.Qos | The specified QosId is invalid. | The specified QosId parameter is invalid. | |
| 400 | InvalidId.QOSCAR | The specified QosCarId is invalid. | The specified QosCar instance ID is invalid. | |
| 400 | InvalidId.QOSPY | The specified QosPolicyId is invalid. | The specified QosPolicy instance ID is invalid. | |
| 403 | InvalidId.SMARTAG | The specified smart access gateway instance id is invalid. | The specified Smart Access Gateway instance ID is invalid. | |
| 400 | InvalidId.SMARTAG | The specified smart access gateway instance ID does not exist. | The specified Smart Access Gateway instance ID does not exist. | |
| 400 | InvalidId.SN | The specified smart access gateway serial number does not exist. | The specified SAG serial number does not exist. | |
| 400 | InvalidId.VBR | The specified VBR instance is invalid. You must specify a VBR instance that is associated with an ECC instance. | The specified VBR is invalid. The VBR instance does not belong to an ECC instance. | |
| 400 | InvalidInstanceIds.NotFound | The specified instance IDs do not exist. | The specified instance ID list does not exist. | |
| 400 | InvalidInstanceType.NotFound | The specified instance type does not exist. | The specified instance type does not exist. | |
| 400 | InvalidIpAddress.AlreadyExist | The specified IP address already exists. | The specified address already exists. | |
| 400 | InvalidIpAddress.WrongFormat | The specified IP address is invalid. | The specified IP address is invalid. | |
| 400 | InvalidLimitBandwidth | The specified maximum bandwidth is smaller than the minimum bandwidth. Please check your input. | The specified maximum bandwidth value is less than the minimum bandwidth value. Check your input. | |
| 403 | InvalidName | Name not valid. | The specified name is invalid. | |
| 400 | InvalidName | The specified name is invalid. | The specified name is invalid. | |
| 400 | InvalidName | The specified name is not valid. | The specified name is invalid. | |
| 400 | InvalidPacketNumber | The specified probe task packet number is invalid. | The number of packets sent for the probing task is invalid. | |
| 400 | InvalidParam.Ip | The specified IP address is invalid. | The specified IP address is invalid. | |
| 403 | InvalidParameter | The specified parameter is invalid. | The specified parameter is invalid. | |
| 400 | InvalidParameter.Description | You must specify Description. | The required parameter Description is missing. | |
| 400 | InvalidParameter.Description | The specified Description is invalid. | The specified Description parameter is invalid. | |
| 400 | InvalidParameter.DestCidr | You must specify DestCidr. | The required parameter DestCidr is missing. | |
| 400 | InvalidParameter.DestCidr | The specified DestCidr is invalid. | The specified DestCidr parameter is invalid. | |
| 400 | InvalidParameter.DestPortRange | You must specify DestPortRange. | The required parameter DestPortRange is missing. | |
| 400 | InvalidParameter.DestPortRange | The specified DestPortRange is invalid. | The specified DestPortRange parameter is invalid. | |
| 400 | InvalidParameter.EndTime | You must specify EndTime. | The required parameter EndTime is missing. | |
| 400 | InvalidParameter.EndTime | The specified EndTime is invalid. | The specified EndTime parameter is invalid. | |
| 400 | InvalidParameter.LimitType | You must specify LimitType. | The required parameter LimitType is missing. | |
| 400 | InvalidParameter.LimitType | The specified LimitType is invalid. | The specified LimitType parameter is invalid. | |
| 400 | InvalidParameter.Name | You must specify Name. | The required parameter Name is missing. | |
| 400 | AccessPointInvalid | The access point is invalid. | The access point is invalid. | |
| 400 | ACL.InvalidType | The specified ACL type is invalid. | The specified ACL type is invalid. | |
| 400 | ACL.NoSupportWanType | An SAG 1000 device does not support a WAN ACL. | An SAG 1000 device does not support a WAN ACL. | |
| 403 | AclAmountLimit | No more ACL can be created. You can open a ticket to increase the quota of ACLs. | The number of ACL groups has reached the upper limit. You can submit a ticket to request a quota increase. | |
| 403 | AclPerSmartagAmountLimit | No more ACL can be associated with this smart access gateway. | The number of ACL groups that are associated with the SAG instance has reached the upper limit. | |
| 403 | AcrPerAclAmountLimit | The maximum number of rules in an ACL is exceeded. You can open a ticket to increase the quota. | The number of ACL rules has reached the upper limit of ACL rules that you can create under each ACL group. You can submit a ticket to request a quota increase. | |
| 400 | ActionNotSupport | The specified instance does not support this action. | The specified instance does not support this action. | |
| 400 | AlreadyBound.CCN | The specified SAG instance is bound to another CCN instance. Unbind them first. | The specified SAG instance is associated with another CCN instance. Disassociate them first. | |
| 403 | AlreadyBound.CEN | This instance has been bound, please unbind first. | The instance has been associated with a CEN instance. You must disassociate the instance from the CEN instance first. | |
| 403 | AlreadyBound.SMARTAG | This instance has been bound, please unbind smart access gateway first. | The instance has been associated with an SAG instance. You must disassociate the instance from the SAG instance first. | |
| 400 | Bandwidth.InvalidId | The specified bandwidth instance ID is invalid. | The specified bandwidth instance ID is invalid. | |
| 400 | Box.ExistSN | The specified SN already exists. | The specified SN already exists. | |
| 400 | Box.InvalidId | The specified SAG device ID is invalid. | The specified SAG device ID is invalid. | |
| 400 | Box.InvalidSN | The specified SN is invalid. | The specified SN is invalid. | |
| 400 | CCN.CidrAmountLimit | The maximum number of CCN CIDR blocks is exceeded. | The maximum number of CCN CIDR blocks is exceeded. | |
| 400 | CCN.CidrEmpty | You must specify the CCN CIDR block. | You must specify the CCN CIDR block. | |
| 400 | CCN.CidrInUse | The specified CCN CIDR block is being used. | The specified CCN CIDR block is being used. | |
| 400 | CCN.InvalidCidr | The specified CCN CIDR block is invalid. | The specified CCN CIDR block is invalid. | |
| 400 | CCN.InvalidId | You must specify the CCN instance ID. | You must specify the CCN instance ID. | |
| 400 | CCN.InvalidInterworkingStatus | The specified connection status is invalid. Specify the connection status to enable or disable. | The specified connection status is invalid. Specify the connection status to enable or disable. | |
| 400 | CCN.InvalidSnatCidr | The SNAT CIDR block of CCN is invalid. | The SNAT CIDR block of CCN is invalid. | |
| 400 | CCN.InvalidUid | The specified CCN user ID is invalid. | The specified CCN user ID is invalid. | |
| 400 | CCN.NetworkOptOpened | Public network optimization is enabled for the specified CCN instance. You cannot unbind this CCN instance with the CEN instance. | Public network optimization is enabled for the specified CCN instance. You cannot unbind this CCN instance from the CEN instance. | |
| 400 | CCN.SnatCidrConflict | The specified SNAT CIDR block is invalid. | The specified SNAT CIDR block is invalid. | |
| 400 | CCN.SnatCidrInUse | The SNAT CIDR block of the CCN is being used and cannot be changed. | The SNAT CIDR block of the CCN is being used and cannot be changed. | |
| 400 | CCN.SnatCidrNoConfig | You must configure the SNAT CIDR block of the CCN. | You must configure the SNAT CIDR block of the CCN. | |
| 403 | CcnAmountLimit | The CCNs you created has reached the limit, you can raise the limit by application. | The number of CCN instances that you have created has reached the upper limit. You can submit a ticket to request a quota increase. | |
| 400 | CCN_IS_BOUND | The specified CCN has been bound to a VPC. | The specified CCN has been bound to a VPC. | |
| 400 | CCN_NOT_EXIST | The specified CCN instance does not exist. | The specified CCN instance does not exist. | |
| 403 | CidrConflict | The subnet CIDR block %s is in conflict with instance %s. Please check your input. | The CIDR block of the subnet % overlaps with that of the instance %s. Check the CIDR blocks. | |
| 400 | ClientUser.BandwidthInvalid | The specified Bandwidth is invalid. | The specified bandwidth is invalid. | |
| 400 | ClientUser.ClientIpsEmpty | You must specify ClientIp. | The IP address is not specified. | |
| 400 | ClientUser.ClientIpsInvalid | The specified ClientIps is invalid. | Invalid IP address. | |
| 400 | ClientUser.EmailEmpty | You must specify UserEmail. | You must specify the email address. | |
| 400 | ClientUser.EmailInvalid | The format of the specified UserEmail is invalid. | The format of the email address is invalid. | |
| 400 | ClientUser.InvalidClientIp | The specified ClientIp is invalid. | The specified ClientIp is invalid. | |
| 400 | ClientUser.InvalidOriginUser | The origin user is invalid. | The origin user is invalid. | |
| 400 | ClientUser.IpEmpty | You must specify ClientIp. | You must specify the static IP address. | |
| 400 | ClientUser.IpInvalid | The specified ClientIp is invalid. | The specified static IP address is invalid. | |
| 400 | ClientUser.NameEmpty | You must specify UserName. | You must enter a username. | |
| 400 | ClientUser.NameInvalid | The specified UserName is invalid. | The format of the username is invalid. | |
| 400 | ClientUser.NotSupportAction | You cannot create a user in the current SAG instance. | You cannot create a user in the current SAG instance. | |
| 400 | ClientUser.PasswordInvalid | The specified password format is invalid. | The specified password format is invalid. | |
| 400 | ClientUser.UserExist | The specified user already exists. | The specified user already exists. | |
| 400 | ClientUser.UserInUsing | The specified SAG user account is already in use this month. You cannot delete it. | The specified SAG user account is already in use this month. You cannot delete it. | |
| 400 | ClientUser.UserOverLimit | The maximum number of users is exceeded. | The maximum number of users is exceeded. | |
| 400 | ConfigSynchronizing | The network configuration is being synchronized. Try again later. | The configuration is being synchronized. Try again later. | |
| 400 | ConfigUnsynchronized | The network configuration is not synchronized. | Network settings are not synchronized. | |
| 400 | CreateProjectFailed | Failed to create the SLS project. | Failed to create the Log Service project. | |
| 400 | DedicatedLineBackupCreateFailed | An error occurred while creating dedicated line backup. | An error occurred while creating a standby leased line. | |
| 400 | DefaultEnterpriseCode.NotExist | The specified default enterprise code does not exist. | The specified default enterprise code does not exist. | |
| 400 | DependencyViolation.FlowLog | This FlowLog instance is bound to an SAG instance. | This flow log associated with a resource. | |
| 400 | DnatPerSagLimit | The maximum number of DNAT entries in an SAG is exceeded. You can open a ticket to increase the quota. | The number of DNAT entries configured for the Smart Access Gateway has exceeded the maximum quota. | |
| 400 | DnatPerSagLimit | The maximum number of DNAT entries in an SAG is exceeded. | The maximum number of DNAT entries in an SAG is exceeded. | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The DryRun parameter is enabled. Request verification is enabled. | |
| 400 | Duplicated.Cidr | The specified CIDR block already exists. | The specified CIDR block already exists. | |
| 400 | Duplicated.DestPrefix | The specified DestPrefix already exists. | The specified DestPrefix already exists. | |
| 400 | Duplicated.HcIp | The specified HcIp parameter already exists. | The specified HcIp parameter already exists. | |
| 400 | DuplicatedDnatEntry | The specified ExternalIp, IpProtocol, ExternalPort, InternalIp, and InternalPort are duplicated. | The specified public IP address, port, public port, private IP address, and private port overlap. | |
| 400 | DuplicatedGrantRule | The specified privilege granting rule already exists. | The permission rule already exists. | |
| 400 | DuplicatedParam.%s | The parameter %s is duplicated. | The %s parameter is duplicate. | |
| 400 | ECC.InvalidId | The specified ECC instance does not exist. | The specified ECC instance does not exist. | |
| 400 | EnterpriseCode.AmountLimit | No more enterprise code can be created. You can open a ticket to increase the quota of enterprise codes. | No more enterprise code can be created. You can open a ticket to increase the quota of enterprise codes. | |
| 400 | EnterpriseCode.BeenOccupied | The specified enterprise code is occupied by other enterprises. | The enterprise code belongs to another enterprise. | |
| 400 | EnterpriseCode.BeingUsed | The specified enterprise code is being used. | The enterprise code is in use. | |
| 400 | EnterpriseCode.ConfigDifferent | The enterprise code and the IDaaS configuration of the target SAG must be the same as those of the current SAG. | The enterprise code and the IDaaS configuration of the target SAG must be the same as those of the current SAG. | |
| 400 | EnterpriseCode.ConfigDifferent | The target smart access gateway enterprise code or idaas configuration is not the same. | The two SAG instances are associated with different enterprise codes. | |
| 400 | EnterpriseCode.DeleteLimit | The specified default enterprise code cannot be deleted. | You cannot delete the default enterprise code. | |
| 400 | EnterpriseCode.NotExist | The specified enterprise code does not exist. | The enterprise code does not exist. | |
| 400 | EnterpriseCode.UserNameConflict | The specified username already exists. | The username already exists. | |
| 400 | ErrorConfigExist | An error occurred while applying configurations to the device. Synchronize the device configurations to the cloud. | An error occurred while applying configurations to the device. Synchronize the device configurations to the cloud. | |
| 400 | ExclusiveParam.%sAnd%s | The parameter of %s and %s are mutually exclusive. | The %s and %s parameters conflict with each other. | |
| 400 | ExistSameParamTask | Exist task with same params. | The parameters of the probing task are the same as another probing task. | |
| 403 | FeatureNotSupport | The current edition of the smart access gateway does not support this feature. | The current version of Smart Access Gateway does not support this feature. | |
| 403 | FeatureNotSupportForActiveSmartAG | The current edition of the active smart access gateway does not support this feature. | The current edition of the active SAG instance does not support this feature. | |
| 403 | FeatureNotSupportForStandBySmartAG | The current edition of the standby smart access gateway does not support this feature. | The current version of Smart Access Gateway does not support this feature. | |
| 400 | Forbbiden.SubUser | You are not authorized to operate on the specified resource. | You do not have permissions to manage the specified resource. | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | You do not have permissions to manage the specified resource. | |
| 403 | FORBIDDEN.ACTION | You are not authorized to access the current API operation. | You do not have the permissions to access the API. | |
| 400 | Forbidden.NotAllowedCategary | You are not authorized to manage the system tags. | You do not have permissions to manage system tags. | |
| 403 | Forbidden.SmartAGUser | Authentication failed. SmartAG user is not authorized to create a reseller instance. | You are not allowed to create reseller instances. | |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | The specified tag key already exists. | |
| 400 | Forbidden.TagKeys | You are not authorized to modify or delete the tag key. | You do not have permissions to manage the tag key. | |
| 400 | Forbidden.TagValue | You are not authorized to modify or delete the tag value. | You do not have permissions to manage the tag key. | |
| 400 | GetLinkLevelBackupStateFailed | An error occurred while retrieving link-level backup state. | An error occurred while obtaining the status of the link-level backup. | |
| 403 | GetSmartAccessGatewayStateError | An error occurred while obtaining the smart access gateway status. | An error occurred while obtaining the status of the SAG instance. | |
| 403 | GetSmartAccessGatewayVersionError | An error occurred while obtaining the smart access gateway version. | An error occurred while obtaining the version of Smart Access Gateway. | |
| 400 | HC.AmountLimit | The maximum number of health check instances is exceeded. | The maximum number of health check instances is exceeded. | |
| 400 | HC.AutoGenerated | The health check instance is automatically generated and cannot be modified. | The health check instance is automatically generated and cannot be modified. | |
| 400 | HC.InstanceNoFound | The specified network health check instance does not exist. | The specified network health check instance does not exist. | |
| 400 | HC.InvalidDescription | The specified description is invalid. | The specified description is invalid. | |
| 400 | HC.InvalidDstIpAddr | The specified destination IP address is invalid. | The specified destination IP address is invalid. | |
| 400 | HC.InvalidDstPort | The specified destination port is invalid. | The specified destination port is invalid. | |
| 400 | HC.InvalidFailCountThreshold | The maximum number of successive failed probes is exceeded. | The maximum number of successive failed probes is exceeded. | |
| 400 | HC.InvalidName | The specified name is invalid. | The specified name is invalid. | |
| 400 | HC.InvalidProbeCount | The specified number of probes is invalid. | The specified number of probes is invalid. | |
| 400 | HC.InvalidProbeInterval | The specified probe interval is invalid. | The specified probe interval is invalid. | |
| 400 | HC.InvalidProbeTimeout | The specified probe timeout period is invalid. | The specified probe timeout period is invalid. | |
| 400 | HC.InvalidRttFailThreshold | The RTT threshold has been triggered too many times. | The RTT threshold has been triggered too many times. | |
| 400 | HC.InvalidRttThreshold | The specified RTT is invalid. | The specified RTT is invalid. | |
| 400 | HC.InvalidSrcIpAddr | The specified source IP address is invalid. | The specified source IP address is invalid. | |
| 400 | HC.InvalidSrcPort | The specified source port is invalid. | The specified source port is invalid. | |
| 400 | HC.InvalidType | The specified type is invalid. | The specified type is invalid. | |
| 400 | HC.RelatedRoute | The specified health check instance has associated routes and cannot be deleted. | The specified health check instance has associated routes and cannot be deleted. | |
| 400 | IdempotenceProcessing | The previous request is being processed. | The system is processing the previous request. | |
| 400 | IdempotenceSignatureMismatch | There is an idempotence signature mismatch between this and the previous request. | The request does not match the idempotent signature of the previous request. | |
| 400 | IllegalParam | The parameter is invalid. | A parameter is set to an invalid value. | |
| 400 | IllegalParam.%s | The specified parameter %s is invalid. | The specified parameter %s is invalid. | |
| 400 | IllegalParam.%s | The parameter %s is illegal. | The %s parameter is set to an invalid value. | |
| 400 | IllegalParam.ActiveAging | The specified ActiveAging is invalid. | The ActiveAging parameter is set to an invalid value. | |
| 400 | IllegalParam.AddressType | The specified AddressType is invalid. | The specified AddressType is invalid. | |
| 400 | IllegalParam.AuthenticationType | The specified AuthenticationType is invalid. | The specified AuthenticationType is invalid. | |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | The specified Bandwidth is invalid. | |
| 400 | IllegalParam.BoxConfig | The specified BoxConfig is invalid. | The BoxConfig parameter is set to an invalid value. | |
| 400 | IllegalParam.Channel | The specified Channel is invalid. | The specified Channel is invalid. | |
| 400 | IllegalParam.Cidr | The specified CIDR block is invalid. | The specified CIDR block is invalid. | |
| 400 | IllegalParam.DestPrefix | The specified DestPrefix is invalid. | The specified DestPrefix is invalid. | |
| 400 | IllegalParam.EncryptionAlgorithm | The specified EncryptionAlgorithm is invalid. | The specified EncryptionAlgorithm is invalid. | |
| 400 | IllegalParam.ExpressConnectionInterface | The specified ExpressConnectionInterface parameter is invalid. | The specified ExpressConnectionInterface parameter is invalid. | |
| 400 | IllegalParam.ExpressConnectionNexthop | The specified ExpressConnectionNexthop parameter is invalid. | The specified ExpressConnectionNexthop parameter is invalid. | |
| 400 | IllegalParam.Gateway | The specified Gateway is invalid. | The specified Gateway is invalid. | |
| 400 | IllegalParam.HcIp | The specified HcIp parameter is invalid. | The specified HcIp parameter is invalid. | |
| 400 | IllegalParam.InactiveAging | The specified InactiveAging is invalid. | The InactiveAging parameter is set to an invalid value. | |
| 400 | IllegalParam.IP | The specified Ip is invalid. | The specified Ip is invalid. | |
| 400 | IllegalParam.LanIp | The specified LanIp is invalid. | The specified LanIp is invalid. | |
| 400 | IllegalParam.Mask | The specified Mask is invalid. | The specified Mask is invalid. | |
| 400 | IllegalParam.Mask | The specified mask (%s) is invalid. | The specified mask (%s) is invalid. | |
| 400 | IllegalParam.MasterDns | The specified MasterDns is invalid. | The specified MasterDns is invalid. | |
| 400 | IllegalParam.NetflowServerIp | The specified NetflowServerIp is invalid. | The NetflowServerIp parameter is set to an invalid value. | |
| 400 | IllegalParam.NetflowServerPort | The specified NetflowServerPort is invalid. | The NetflowServerPort parameter is set to an invalid value. | |
| 400 | IllegalParam.NetflowVersion | The specified NetflowVersion is invalid. | The NetflowVersion parameter is set to an invalid value. | |
| 400 | IllegalParam.Nexthop | The specified Nexthop is invalid. | The specified Nexthop is invalid. | |
| 400 | IllegalParam.OutputType | The specified OutputType is invalid. | The OutputType parameter is set to an invalid value. | |
| 400 | IllegalParam.Password | The specified Password is invalid. | The Password parameter is set to an invalid value. | |
| 400 | IllegalParam.RegionId | The specified RegionId is invalid. | The RegionId parameter is set to an invalid value. | |
| 400 | IllegalParam.SlaveDns | The specified SlaveDns is invalid. | The specified SlaveDns is invalid. | |
| 400 | IllegalParam.SlsRegionId | The specified SlsRegionId is invalid. | The SlsRegionId parameter is set to an invalid value. | |
| 400 | IllegalParam.Ssid | The specified Ssid is invalid. | The specified Ssid is invalid. | |
| 400 | IllegalParam.Status | The specified Status parameter is invalid. | The Status parameter is set to an invalid value. | |
| 400 | IllegalParam.UserName | The specified UserName is invalid. | The specified UserName is invalid. | |
| 400 | IllegalParamFormat.%s | The parameter format of %s is invalid. | The format of the %s parameter is invalid. | |
| 400 | IllegalParamLength.%s | The length of parameter %s is invalid. | The length of the %s parameter is invalid. | |
| 400 | IllegalParamSize.%s | The number of the parameter %s is invalid. | The size of the %s parameter is invalid. | |
| 403 | IllegalRemoteIp.Conflict | The specified IP address has been used. | The specified IP address has been used. | |
| 403 | IllegalRemoteIp.RouteTableEntryConflict | The specified IP address conflicts with route table entries. | The specified IP address conflicts with route table entries. | |
| 400 | IncorrectBusinessStatus.ApplicationBandwidthPackage | The business status of ApplicationBandwidthPackage is incorrect. | The status of the application acceleration bandwidth plan is invalid. | |
| 400 | IncorrectStatus | The instance status is invalid. | The instance state is invalid. | |
| 400 | IncorrectStatus.FlowLog | The current FlowLog instance status does not support this operation. | The status of the flow log is invalid. | |
| 400 | IncorrectStatus.ResellerInstance | The status of reseller instance is incorrect. | The status of the reseller instance is invalid. | |
| 400 | IncorrectStatus.SagECRouteBackup | The status of the route backup is invalid. | The status of the route backup is invalid. | |
| 400 | IncorrectStatus.SmartAG | The status of SmartAG is incorrect. | The status of the SAG instance is invalid. | |
| 400 | IncorrectStatus.SmartAGDpi | The DPI status of Smart Access Gateway is invalid. | The DPI status of the SAG instance is invalid. | |
| 400 | IncorrectStatus.SN | The current device status does not support this operation. | The current device status does not support this operation. | |
| 501 | InnerServiceFailed | Call inner service failed. | An error occurred while invoking internal services. | |
| 400 | InstanceExists | The specified instance already exists. | The specified instance already exists. | |
| 400 | InstanceNotExit | The specified instance does not exist. | The specified instance does not exist. | |
| 403 | InternalError | An internal server error occurred. | An internal server error occurred. | |
| 500 | InternalError | An error occurred while processing your request. | An error occurred while processing your request. | |
| 400 | Invalid.QosCar.Priority | The specified priority of QosCarId is invalid. | The specified priority of QosCarId is invalid. | |
| 400 | InvalidBandwidthCompare | The specified maximum bandwidth is smaller than the minimum bandwidth. Please check your input. | The specified maximum bandwidth is smaller than the minimum bandwidth. Please check your input. | |
| 403 | InvalidCidr | Cidr is illegal, please check your input. | The specified CIDR block is invalid. Enter a correct CIDR block. | |
| 400 | InvalidCidr.NotFound | The specified CIDR block does not exist. | The specified CIDR block does not exist. | |
| 403 | InvalidDescription | Description not valid. | The length of the description has exceeded the upper limit. | |
| 400 | InvalidDescription | The specified description is invalid. | The specified description is invalid. | |
| 400 | InvalidDestPrefix.NotFound | The specified DestPrefix does not exist. | The specified DestPrefix does not exist. | |
| 400 | InvalidFlowLogId.NotFound | The specified FlowLogId does not exist. | The specified FlowLogId does not exist. | |
| 400 | InvalidHardwareType | The specified hardware type is invalid. | The specified hardware type is invalid. | |
| 403 | InvalidId.ACL | The specified ACL ID is invalid. | The specified ACL group ID is invalid. | |
| 403 | InvalidId.ACR | The specified ACL rule ID is invalid. | The specified ACL rule ID is invalid. | |
| 403 | InvalidId.CCN | Invalid cloud connect network id. | The ID of the CCN instance is invalid. | |
| 400 | InvalidId.PercentSourceType | The specified PercentSourceType is invalid. | The specified PercentSourceType is invalid. | |
| 400 | InvalidId.Qos | The specified QosId is invalid. | The QosId parameter is set to an invalid value. | |
| 400 | InvalidId.QOSCAR | The specified QosCarId is invalid. | The specified QosCarId is invalid. | |
| 400 | InvalidId.QOSPY | The specified QosPolicyId is invalid. | The specified QosPolicyId is invalid. | |
| 403 | InvalidId.SMARTAG | The specified smart access gateway instance id is invalid. | The SAG instance ID is invalid. | |
| 400 | InvalidId.SMARTAG | The specified smart access gateway instance ID does not exist. | The specified SAG instance ID is invalid. | |
| 400 | InvalidId.SN | The specified smart access gateway serial number does not exist. | The specified smart access gateway serial number does not exist. | |
| 400 | InvalidId.VBR | The specified VBR instance is invalid. You must specify a VBR instance that is associated with an ECC instance. | The specified VBR instance is invalid. You must specify a VBR instance that is associated with an ECC instance. | |
| 400 | InvalidInstanceIds.NotFound | The specified instance IDs do not exist. | The instance ID list does not exist. | |
| 400 | InvalidInstanceType.NotFound | The specified instance type does not exist. | The specified instance type does not exist. | |
| 400 | InvalidIpAddress.AlreadyExist | The specified IP address already exists. | The specified IP address already exists. | |
| 400 | InvalidIpAddress.WrongFormat | The specified IP address is invalid. | The specified IP address is invalid. | |
| 400 | InvalidLimitBandwidth | The specified maximum bandwidth is smaller than the minimum bandwidth. Please check your input. | The specified maximum bandwidth is smaller than the minimum bandwidth. Please check your input. | |
| 403 | InvalidName | Name not valid. | The specified name is invalid. | |
| 400 | InvalidName | The specified name is invalid. | The specified name is invalid. | |
| 400 | InvalidName | The specified name is not valid. | The specified name is invalid. | |
| 400 | InvalidPacketNumber | The specified probe task packet number is invalid. | The number of probe packets specified for the probing task is invalid. | |
| 400 | InvalidParam.Ip | The specified IP address is invalid. | The specified IP address is invalid. | |
| 403 | InvalidParameter | The specified parameter is invalid. | Invalid parameters. | |
| 400 | InvalidParameter.Description | You must specify Description. | You must set the Description parameter. | |
| 400 | InvalidParameter.Description | The specified Description is invalid. | The Description parameter is set to an invalid value. | |
| 400 | InvalidParameter.DestCidr | You must specify DestCidr. | You must set the DestCidr parameter. | |
| 400 | InvalidParameter.DestCidr | The specified DestCidr is invalid. | The DestCidr parameter is set to an invalid value. | |
| 400 | InvalidParameter.DestPortRange | You must specify DestPortRange. | You must set the DestPortRange parameter. | |
| 400 | InvalidParameter.DestPortRange | The specified DestPortRange is invalid. | The DestPortRange parameter is set to an invalid value. | |
| 400 | InvalidParameter.EndTime | You must specify EndTime. | You must set the EndTime parameter. | |
| 400 | InvalidParameter.EndTime | The specified EndTime is invalid. | The EndTime parameter is set to an invalid value. | |
| 400 | InvalidParameter.LimitType | You must specify LimitType. | The specified LimitType parameter is invalid. | |
| 400 | InvalidParameter.LimitType | The specified LimitType is invalid. | The specified LimitType is invalid. | |
| 400 | InvalidParameter.Name | You must specify Name. | The specified Name parameter is invalid. | |
| 400 | InvalidParameter.Name | The specified Name is invalid. | The Name parameter is set to an invalid value. | |
| 400 | InvalidParameter.PercentSourceType | You must specify PercentSourceType. | The required parameter PercentSourceType is missing. | |
| 400 | InvalidParameter.PercentSourceType | The specified PercentSourceType is invalid. | The specified parameter PercentSourceType is invalid. | |
| 400 | InvalidParameter.Priority | You must specify Priority. | The required parameter Priority is missing. | |
| 400 | InvalidParameter.Priority | The specified Priority is invalid. | The specified parameter Priority is invalid. | |
| 400 | InvalidParameter.SourceCidr | You must specify SourceCidr. | The required parameter SourceCidr is missing. | |
| 400 | InvalidParameter.SourceCidr | The specified SourceCidr is invalid. | The specified parameter SourceCidr is invalid. | |
| 400 | InvalidParameter.SourcePortRange | You must specify SourcePortRange. | The required parameter SourcePortRange is missing. | |
| 400 | InvalidParameter.SourcePortRange | The specified SourcePortRange is invalid. | The specified parameter SourcePortRange is invalid. | |
| 400 | InvalidParameter.StartTime | You must specify StartTime. | The required parameter StartTime is missing. | |
| 400 | InvalidParameter.StartTime | The specified StartTime is invalid. | The specified parameter StartTime is invalid. | |
| 403 | InvalidPortRange | The specified port range is invalid. | The specified port range is invalid. | |
| 400 | InvalidProbeDomain | The specified probe task domain is invalid. | The domain name of the probing task is invalid. | |
| 400 | InvalidProbePort | The specified probe task port is invalid. | The port of the probing task is invalid. | |
| 400 | InvalidProbeProtocol | The specified probe task protocol is invalid. | The protocol of the probing task is invalid. | |
| 400 | InvalidProbeSourceIP | The specified probe task source ip is invalid. | The source IP address of the probing task is invalid. | |
| 400 | InvalidProbeType | The specified probe task type is invalid. | The type of the probing task is invalid. | |
| 400 | InvalidRegionID | The specified regionId does not exist. | The specified RegionId does not exist. | |
| 400 | InvalidSagECRouteBackup.NotFound | The specified route backup does not exist. | The route backup configuration is not found. | |
| 400 | InvalidServiceAddressType | The specified service address type is invalid. | The service address type is invalid. | |
| 400 | InvalidSmartAGId.NotFound | The specified SmartAGId does not exist. | No instance was found for the specified SmartAGId. | |
| 400 | InvalidTagKey | The specified tag key is invalid. | The key of the tag is invalid. | |
| 400 | InvalidTagScope.NotFound | The specified tag scope does not exist | The scope type of the tag does not exist. | |
| 400 | InvalidTagValue | The specified tag value is invalid. | The value of the tag is invalid. | |
| 400 | InvalidTimeRangeCompare | The specified end time is earlier than the start time. Please check your input. | The specified end time is earlier than the start time. Check your input. | |
| 400 | INVALID_VPC | The specified VPC does not exist or it has not been associated with a private zone. | The specified VPC does not exist or is not associated with a private zone. | |
| 403 | InventoryNotEnough | The inventory of Smart Access Gateway is insufficient. | The Smart Access Gateway inventory is insufficient. | |
| 400 | LastRequestIsProcessing | The last request is processing. | The previous request is still in progress. Try again later. | |
| 400 | LinkLevelBackupCreateFailed | An error occurred while creating link-level backup. | Failed to create the link-level backup. | |
| 400 | LinkLevelBackupDeleteFailed | An error occurred while deleting link-level backup. | Failed to delete the link-level backup. | |
| 400 | LinkLevelBackupExists | The specified SAG instance is already used as a leased line backup. | A standby connection already exists for the current instance. | |
| 400 | LinkLevelBackupSwitchFailed | An error occurred while switching link-level backup. | Failed to switch the link-level backup. | |
| 400 | LinkStateError | The specified link is in an incorrect state | The link state is invalid. | |
| 400 | MissingParam | You must specify the parameter. | A required parameter is missing. | |
| 400 | MissingParam.%s | You must specify the %s parameter. | The parameter %s is missing. | |
| 400 | MissingParam.%s | You must specify the parameter %s. | The parameter %s is missing. | |
| 400 | MissingParam.AuthenticationType | You must specify AuthenticationType. | The parameter AuthenticationType is missing. | |
| 400 | MissingParam.DestPrefix | You must specify the parameter. | A parameter is missing. | |
| 400 | MissingParam.EnableBackup | Specify the EnableBackup parameter. | The parameter EnableBackup is missing. | |
| 400 | MissingParam.EncryptionAlgorithm | You must specify EncryptionAlgorithm. | The parameter EncryptionAlgorithm is missing. | |
| 400 | MissingParam.ExpressConnectionInterface | Specify the ExpressConnectionInterface parameter. | The parameter ExpressConnectionInterface is missing. | |
| 400 | MissingParam.ExpressConnectionNexthop | Specify the ExpressConnectionNexthop parameter. | The ExpressConnectionNexthop parameter is missing. | |
| 400 | MissingParam.FlowLogId | Specify the FlowLogId parameter. | The FlowLogId parameter is missing. | |
| 400 | MissingParam.HcIp | Specify the HcIp parameter. | The HcIp parameter is missing. | |
| 400 | MissingParam.LogstoreName | Specify the LogstoreName parameter. | The LogstoreName parameter is missing. | |
| 400 | MissingParam.NetflowServerIp | Specify the NetflowServerIp parameter. | The NetflowServerIp parameter is missing. | |
| 400 | MissingParam.NetflowServerPort | Specify the NetflowServerPort parameter. | The NetflowServerPort parameter is missing. | |
| 400 | MissingParam.NetflowVersion | Specify the NetflowVersion parameter. | The NetflowVersion parameter is missing. | |
| 400 | MissingParam.Password | You must specify Password. | The Password parameter is missing. | |
| 400 | MissingParam.ProjectName | Specify the ProjectName parameter. | The ProjectName parameter is missing. | |
| 400 | MissingParam.RouteBackup | Specify the RouteBackup parameter. | The RouteBackup parameter is missing. | |
| 400 | MissingParam.SlsRegionId | Specify the SlsRegionId parameter. | The SlsRegionId parameter is missing. | |
| 400 | MissingParam.StockKeepingUnit | You must specify the parameter StockKeepingUnit. | The StockKeepingUnit parameter is missing. | |
| 400 | MissingParam.UserName | You must specify UserName. | The UserName parameter is missing. | |
| 403 | MissingParameter | The input parameter is missing, please check your input. | Required input parameters are missing. Check your input. | |
| 400 | MissParameter.DestCidr | You must specify DestCidr. | The required parameter DestCidr is missing. | |
| 400 | MissParameter.DestPortRange | You must specify DestPortRange. | The required parameter DestPortRange is missing. | |
| 400 | MissParameter.IpProtocol | You must specify IpProtocol. | The required parameter IpProtocol is missing. | |
| 400 | MissParameter.LimitType | You must specify LimitType. | The required parameter LimitType is missing. | |
| 400 | MissParameter.MaxBandwidthAbs | You must specify MaxBandwidthAbs. | The required parameter MaxBandwidthAbs is missing. | |
| 400 | MissParameter.MaxBandwidthPercent | You must specify MaxBandwidthPercent. | The required parameter MaxBandwidthPercent is missing. | |
| 400 | MissParameter.MinBandwidthAbs | You must specify MinBandwidthAbs. | The required parameter MinBandwidthAbs is missing. | |
| 400 | MissParameter.MinBandwidthPercent | You must specify MinBandwidthPercent. | The required parameter MinBandwidthPercent is missing. | |
| 400 | MissParameter.Name | You must specify Name. | The required parameter Name is missing. | |
| 400 | MissParameter.PercentSourceType | You must specify PercentSourceType. | The required parameter PercentSourceType is missing. | |
| 400 | MissParameter.Priority | You must specify Priority. | The required parameter Priority is missing. | |
| 400 | MissParameter.QosCarId | You must specify QosCarId. | The required parameter QosCarId is missing. | |
| 400 | MissParameter.QosId | You must specify QosId. | The required parameter QosId is missing. | |
| 400 | MissParameter.QosPolicyId | You must specify QosPolicyId. | The required parameter QosPolicyId is missing. | |
| 400 | MissParameter.RegionId | You must specify RegionId. | The required parameter RegionId is missing. | |
| 400 | MissParameter.SmartAGId | You must specify SmartAGId. | The required parameter SmartAGId is missing. | |
| 400 | MissParameter.SourceCidr | You must specify SourceCidr. | The required parameter SourceCidr is missing. | |
| 400 | MissParameter.SourcePortRange | You must specify SourcePortRange. | The required parameter SourcePortRange is missing. | |
| 400 | NetworkOpt.Exist | A network optimization instance has already been activated for the specified CCN instance. | An Internet optimization instance is already enabled for the current CCN instance. | |
| 400 | NetworkOpt.InstanceIdEmpty | You must specify the NetworkOptId parameter. | The Internet optimization instance ID cannot be empty. | |
| 400 | NetworkOpt.InvalidInstanceId | The specified instance ID is invalid. | The Internet optimization instance is invalid. | |
| 400 | NetworkOpt.InvalidSetting | The specified domain is invalid. | The domain name setting is invalid. | |
| 400 | NetworkOpt.InvalidSettingType | The specified configuration type is invalid. | The configuration type is invalid. | |
| 400 | NetworkOpt.InvalidState | The specified instance is not available. | The instance status of the Internet instance is not active. | |
| 400 | NetworkOpt.SagBound | The specified SAG instance has already been bound to this network optimization instance. | The SAG instance is already bound to the current Internet optimization instance. | |
| 400 | NetworkOpt.SagSoftwareCanNotAttached | The software SAG instance does not support optimization through the public network. | The software client does not support Internet optimization. | |
| 400 | NetworkOpt.SettingExist | The specified domain already exists. | The domain name configuration already exists. | |
| 400 | NetworkOpt.UnbindCEN | The specified CCN instance is not bound to any CEN instance. | The current CCN is not associated with a CEN. | |
| 403 | NotBoundCCN | The specified smart access gateway has not bound CCN; please bind CCN first. | The Smart Access Gateway instance is not associated with a CCN. Associate a CCN first. | |
| 400 | NotBoundCEN | Bind the specified CCN instance to a CEN instance first. | The current CCN instance is not associated with a CEN. Associate a CEN first. | |
| 403 | NotSupportedProtocol | The specified protocol of the ACL rule is not supported. | The protocol type specified for the ACL rule is not supported. | |
| 400 | NotSupportedProtocol | The specified protocol of the QoS policy is not supported. | The QoS policy rule does not support this protocol. | |
| 400 | OperationDenied.Arrearage | The operation is denied due to overdue payment. | The operation is denied due to an overdue payment. | |
| 400 | OperationDenied.BandwidthExceeded | The total bandwidth exceeds the limit. The operation is denied. | The operation is denied because the total bandwidth exceeds the limit. | |
| 400 | OperationDenied.BondApplicationBandwidthPackage | The application acceleration bandwidth package is bound to the current instance. You cannot unbind the cloud connection network. Please unbind the application acceleration bandwidth package first. | The Cloud Connect Network (CCN) cannot be disassociated because the current instance is associated with a bandwidth plan for application acceleration. Disassociate the bandwidth plan for application acceleration first. | |
| 400 | OperationDenied.NoBindCcn | The CCN is not associated. The operation is denied. | The current operation is denied because no Cloud Connect Network (CCN) is associated. | |
| 400 | OperationFailed.AssociateFlowLog | The operation failed. The specified SAG instance has already been associated with another FlowLog instance. | The operation failed because the Smart Access Gateway instance is already associated with another flow log instance. | |
| 400 | OperationUnsupported.AssociateFlowLog | You cannot bind the SAG device of the current version or model to a FlowLog instance. | The device version or model does not support flow log association. | |
| 400 | Param.CheckError | The specified parameter is invalid. | Parameter validation failed. | |
| 400 | Param.InvalidVersionComparator | The specified version comparison operator is invalid. | The version comparison operation value is invalid. | |
| 400 | ParamCheckError | The specified parameter is invalid. | Parameter validation failed. | |
| 400 | ParamExclusive.AddressTypeAndIpOrGatewayOrMask | When AddressType is not set to manual, you cannot specify Ip, Gateway, or Mask. | When the AddressType parameter is not set to manual, the Ip, Gateway, and Mask parameters cannot be specified. | |
| 400 | ParamExclusive.IPAndIPType | When IpType is set to automatic, you cannot specify an IP address. | When the IpType parameter is set to automatic, the IP address cannot be specified. | |
| 400 | ParamExclusive.IpTypeAndStaticRoute | When IpType is set to automatic, you cannot create a static route. | When the IpType parameter is set to automatic, static routes cannot be created. | |
| 400 | ParamExclusive.MaskAndIPType | When IpType is set to automatic, you cannot specify an IP address. | When the IpType parameter is set to automatic, the IP address cannot be specified. | |
| 400 | ParamExclusive.WirelessSecurityAndAuthenticationType | When the wireless security mode is turned off, you cannot specify AuthenticationType. | When wireless security is not enabled, the AuthenticationType parameter cannot be specified. | |
| 400 | ParamExclusive.WirelessSecurityAndEncryptionAlgorithm | When the wireless security mode is turned off, you cannot specify EncryptionAlgorithm. | When wireless security is not enabled, the EncryptionAlgorithm parameter cannot be specified. | |
| 400 | PayAccountBookNotExist | There is no account book and the account balance is insufficient. Please recharge and try again. | The ledger does not exist. The account balance is insufficient. Top up your account and try again. | |
| 400 | PayInsufficientBalance | Your current account balance is insufficient. | Your current account balance is insufficient. | |
| 500 | PermissionError | No permission to operate the instance. | You do not have the required permissions to manage this instance. | |
| 400 | PLAN.InvalidCode | The specified plan code is invalid. | The bundled sale is invalid. | |
| 400 | ProbeFrequencyTooHigh | The probe frequency is too high. Please try again later. | The probing frequency is too high. Try again later. | |
| 400 | PVTZ_IS_EMPTY | The specified VPC has not been associated to a private zone. | The VPC is not associated with a private zone. | |
| 400 | PVTZ_NOT_EXIST | The specified private zone does not exist. | The private zone does not exist. | |
| 400 | QosAmountLimit | No more QoS can be created. You can submit a ticket to increase the quota of QoSes. | The number of QoS policies under your account has reached the upper limit. Submit a ticket to apply for a quota increase. | |
| 400 | QosCarPerQosAmountLimit | The maximum number of QosCar in a QoS is exceeded. You can submit a ticket to increase the quota. | The number of throttling rules in a single QoS policy has reached the upper limit. | |
| 400 | QosPerSmartagAmountLimit | No more QoS can be associated with this smart access gateway. | The Smart Access Gateway instance cannot be associated with more QoS policies. | |
| 400 | QosPolicyPerQosAmountLimit | The maximum number of policies in a QoS is exceeded. You can submit a ticket to increase the quota. | The number of QoS policy entries in a single QoS policy has reached the upper limit. Submit a ticket to apply for a quota increase. | |
| 400 | QosPyPerQosPyPerQosAmountLimitQosAmountLimit | The maximum number of policies in a QoS is exceeded. You can submit a ticket to increase the quota. | The number of QoS policy entries in a single QoS policy has reached the upper limit. Submit a ticket to apply for a quota increase. | |
| 400 | QueryResultsNumberTooLarge | The query result is inaccuracy. Please modify the query parameter to reduce the query scope. | The query results are not accurate. Adjust the query parameters to narrow down the query scope. | |
| 400 | QuotaExceeded.DnatPerSag | The maximum number of dnat rules in an SAG is exceeded. You can open a ticket to increase the quota. | The number of DNAT entries exceeds the quota. | |
| 400 | QuotaExceeded.Flowlog | The maximum number of FlowLog instances is exceeded. | The number of flow logs exceeds the quota. | |
| 400 | QuotaExceeded.TagNum | The maximum number of tags is exceeded. | The number of user tags has reached the limit. | |
| 400 | RD.InvalidDestCidrBlock | The specified destination CIDR block is invalid. | The destination CIDR block is invalid. | |
| 400 | RD.InvalidHcInstanceId | The specified network health check instance ID is invalid. | The health check instance is invalid. | |
| 400 | RD.InvalidRouteDistribution | The specified route distribution policy is invalid. | The route advertisement policy is invalid. | |
| 400 | RD.InvalidRouteSource | The specified route source is invalid. | The route source is invalid. | |
| 400 | RD.InvalidSourceType | The specified route source type is invalid. | The route source type is invalid. | |
| 500 | RequestTimeout | The request has timed out. | The request timed out. Try again later. | |
| 400 | Resource.QuotaFull | The maximum number of resources is exceeded. | The resource quota has been exhausted. | |
| 400 | ResourceAlreadyAssociated.SmartAccessGateway | The specified resource of SmartAccessGateway is already associated. | The specified Smart Access Gateway instance is already associated. | |
| 400 | ResourceConfiguring | The specified resource is being configured. Try again later. | A configuration is being delivered to the resource. Try again after the configuration is complete. | |
| 400 | ResourceInOperating | The specified resource is being used. Please try later. | The resource is currently being processed. Try again later. | |
| 400 | ResourceNotAssociated.SmartAccessGateway | The specified smart access gateway is not associated. | The specified Smart Access Gateway instance is not associated. | |
| 404 | ResourceNotFound.ApplicationAccelerateRule | The specified resource of %s is not found. | The specified application acceleration rule instance does not exist. | |
| 404 | ResourceNotFound.ApplicationBandwidthPackage | The specified resource of %s is not found. | The specified application bandwidth plan instance does not exist. | |
| 404 | ResourceNotFound.ResellerInstance | The specified resource of reseller instance is not found. | The specified reseller instance resource does not exist. | |
| 404 | ResourceNotFound.SmartAccessGateway | The specified resource of %s is not found. | The specified Smart Access Gateway instance does not exist. | |
| 404 | ResourceNotFound.SmartAG | The specified resource of SmartAG is not found. | The specified SmartAG resource does not exist. | |
| 400 | ResourceNotFound.User | The specified user is not found. | The specified user does not exist. | |
| 400 | SAG.Arrearage | The specified SAG instance has overdue payments. Renew the instance first. | The Smart Access Gateway instance has an overdue payment. Renew the instance first. | |
| 400 | SAG.BusinessStateNotSupport | The specified SAG instance is in use and cannot be deleted. | The SAG instance is in use and cannot be deleted. | |
| 400 | SAG.CcnCidrNoConfig | You must configure the CIDR block of CCN. | The CIDR block of the associated Cloud Connect Network (CCN) is not configured. | |
| 400 | SAG.CidrAmountLimit | The maximum number of static routes for the SAG instance is exceeded. | The number of static routes configured for the Smart Access Gateway instance has reached the upper limit. | |
| 400 | SAG.CidrEmpty | You must specify the CIDR blocks of SAG. | The Smart Access Gateway CIDR block is empty. | |
| 400 | SAG.CidrOverlap | The specified CIDR overlaps with an existing CIDR. | The private network has overlapping private endpoint CIDR blocks. | |
| 400 | SAG.CidrUsedByRoutableAddress | A routable internal IP address belongs to the specified internal CIDR block. You cannot modify this CIDR block. | The private endpoint CIDR block you are modifying is already used by a private network routing address and cannot be modified. | |
| 400 | SAG.ConflictCidr.CcnSnatCidr | The SAG CIDR block is in conflict with the CCN CIDR block. | The Smart Access Gateway CIDR block conflicts with the Cloud Connect Network (CCN) CIDR block. | |
| 400 | SAG.ConflictSnatIp | The specified SNAT IP address is invalid. | The specified SNAT IP address has a conflict. | |
| 400 | SAG.DedicatedLineExist | This SAG instance is used as a backup for a leased line. Unbind the SAG instance from the leased line first. | The current SAG instance is configured with a standby connection. Disassociate the standby connection first. | |
| 400 | Sag.DeviceNotExist | The specified device does not exist. | The device does not exist. | |
| 400 | Sag.EccRouteTypeError | An ECC port supports the BGP protocol only. | Only the BGP protocol can be configured for the Express Connect circuit VLAN. | |
| 400 | Sag.EccVlanDefault | When Vlan 0 exists, other Vlans cannot be created. | When the device is connected to the Express Connect circuit through a physical port (VLAN=0), you cannot create a VLAN. | |
| 400 | Sag.EccVlanExist | The specified VLAN already exists. | The Express Connect circuit VLAN for the current device already exists. | |
| 400 | Sag.EccVlanNotExist | The specified dedicated Vlan does not exist. | The Express Connect circuit VLAN for the current device does not exist. | |
| 400 | Sag.EccVlanOverLimit | The maximum number of VLANs that can be created for the device is exceeded. | The number of Express Connect circuit VLANs for the current device has exceeded the upper limit. | |
| 400 | SAG.ExistBandwidth | You have already purchased bandwidth for this SAG instance. | Bandwidth has already been purchased for the current Smart Access Gateway instance. | |
| 400 | SAG.ExistSerialNumber | The specified SAG instance has been bound to a serial number. | The SAG instance is already associated with a serial number. | |
| 400 | SAG.GrantDuplicated | You have authorized another CCN instance to bind to the specified SAG instance. Revoke the authorization first. | The current SAG instance has been authorized for another CCN instance. Revoke the authorization first. | |
| 400 | Sag.HaPortExist | The specified port is used by the HA configuration. | The current port is occupied by HA. | |
| 400 | Sag.HaPortRoleError | The specified port does not support HA configuration. | The current port role does not support HA configuration. | |
| 400 | Sag.HaTypeNotAllow | The specified device does not support the configuration of the specified type. | The current device does not support this type of configuration. | |
| 400 | SAG.InstanceIdEmpty | You must specify the SAG instance ID. | The Smart Access Gateway instance ID is empty. | |
| 400 | SAG.InstanceNoFound | The specified SAG instance does not exist. | The Smart Access Gateway instance does not exist. | |
| 400 | SAG.InvalidCidr | The specified CIDR block is invalid. | The Smart Access Gateway CIDR block is invalid. | |
| 400 | SAG.InvalidCidr.NoBelongCcnCidr | The specified SAG CIDR block does not belong to the CCN CIDR block. | The Smart Access Gateway CIDR block does not belong to the Cloud Connect Network (CCN) CIDR block. | |
| 400 | SAG.InvalidCidrFormat | The specified CIDR format is invalid. | The format of the private network CIDR block is invalid. | |
| 400 | SAG.InvalidDataPlan | The specified DataPlan is invalid. | The data transfer plan is invalid. | |
| 400 | SAG.InvalidRouteAddress | The specified IP address is invalid. Make sure the specified IP address is within the internal CIDR of the SAG. | The private network address is invalid. Confirm whether it is within the private network CIDR block of the Smart Access Gateway. | |
| 400 | SAG.InvalidRoutingStrategy | The specified routing strategy is invalid. | The routing mode is invalid. | |
| 400 | SAG.InvalidSerialNumber | The specified SerialNumber is invalid. | The serial number is invalid. | |
| 400 | SAG.InvalidSnatCidr | The specified SNAT CIDR block is invalid. | The SNAT CIDR block of the Smart Access Gateway is invalid. | |
| 400 | SAG.InvalidSnatIp | The specified SNAT IP address is invalid. | The SNAT IP address of the Smart Access Gateway is invalid. | |
| 400 | SAG.InvalidUserCount | The specified UserCount is invalid. | The number of users is invalid. | |
| 400 | SAG.IpCountTooLittle | The number of available IP addresses of the CIDR block is fewer than the number of SslConnectionSpec. | The number of active IP addresses in the CIDR block is less than the number of connections. | |
| 400 | SAG.NoActive | The specified SAG instance has not been activated. | The Smart Access Gateway instance is not activated. Activate the instance first. | |
| 400 | SAG.NoBandwidth | Buy bandwidth for the specified SAG instance before binding it to a CCN instance. | No bandwidth is purchased for the current SAG instance. Purchase bandwidth before you associate a CCN instance. | |
| 400 | SAG.NoBindSN | The specified SAG is not bound with a serial number. Please perform binding first. | No serial number is associated with the current Smart Access Gateway instance. Associate a serial number before you perform this operation. | |
| 400 | SAG.NoSupportSwitchHA | The specified SAG instance does not support switching to HA. | The current SAG instance does not support switching the backup type. | |
| 400 | SAG.NoSupportSwitchWarm | You cannot enable the hot standby mode for the specified SAG instance, because the SAG device version is too low or the devices have never been online. | The current SAG instance does not support switching to hot standby mode because the version is too low or the instance has never been brought online. | |
| 400 | SAG.NotAllowConfigCidr | You cannot specify a static CIDR block when the dynamic routing strategy is used. | Static CIDR blocks cannot be configured in dynamic routing mode. | |
| 400 | SAG.NotConfigRoutingStrategy | You must configure the routing strategy. | The routing mode is not configured. | |
| 400 | Sag.PortMgtError | The role of a management port cannot be changed. | The role of the management port cannot be modified. | |
| 400 | Sag.PortNotExist | The specified port does not exist. | The current port does not exist. | |
| 400 | Sag.PortRoleInvalid | The port role is invalid. | The device port role is incorrect. | |
| 400 | Sag.PortRoleLimit | The maximum number of ports with the specified role is exceeded. | The current port role exceeds the limit. | |
| 400 | Sag.RouteProtocolPortNotExist | The port specified for the dynamic routing protocol does not exist. | The port specified for the dynamic routing protocol is incorrect. | |
| 400 | Sag.RouteTypeNotMatch | The routing protocol type must be the same as the global routing protocol type. | The routable protocol type must be consistent with the global routable protocol type. | |
| 400 | SAG.SnConflict | The specified SerialNumber has been bound to another SAG instance. | The serial number is already associated with another SAG instance. | |
| 400 | SAG.SnOverLimit | The maximum number of serial numbers bound to the SAG instance is exceeded. | The number of serial numbers associated with the current SAG instance exceeds the quota. | |
| 400 | SAG.SoftwareNoSupportVbr | You cannot bind an SAG software instance with a VBR instance. | The Smart Access Gateway app is not allowed to attach a VBR. | |
| 400 | SAG.SoftwareNotSupport | The specified SAG software edition instance does not support ACL. | Smart Access Gateway app instances do not support ACLs. | |
| 400 | SAG.SoftwareNotSupportFeature | The specified SAG Software instance does not support this feature. | Smart Access Gateway app instances do not support the current attribute. | |
| 400 | SAG.SslConnectionSpecInvalid | The number of SslConnectionSpec is invalid. | The number of connections is invalid. | |
| 400 | Sag.StaticRouteExist | The specified static route already exists. | The current static route already exists. | |
| 400 | Sag.StaticRouteNotExist | The specified static route does not exist. | The current static route does not exist. | |
| 400 | SAG.VbrBound | The specified SAG instance is bound to another VBR instance. Unbind them first. | A VBR is already associated. Disassociate the VBR first. | |
| 400 | SAG.VbrBoundToSAG | The specified VBR instance is bound to another SAG instance. Unbind them first. | The current VBR is already associated with another SAG instance. Disassociate the VBR first. | |
| 400 | SAG.VbrNotBondCen | Bind the specified VBR instance to a CEN instance first. | The current VBR is not associated with a CEN instance. Associate the VBR with a CEN instance first. | |
| 400 | SagConfiguring | Sag is configuring. | The SAG instance is being configured. | |
| 400 | ServiceAddressInUse | Service address is in use. | The IP address is in use. | |
| 400 | ServiceAddressOperationDenied | Service address operation is denied. | The operation on the IP address is denied. | |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | The number of ResourceIds exceeds the maximum limit. | |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | The number of tags exceeds the maximum limit. | |
| 500 | SmartAccessGatewayActivateFailed | An error has occurred while activating the specified Smart Access Gateway. | Failed to activate the Smart Access Gateway instance. Try again later. | |
| 403 | SmartAccessGatewayAlreadyBound | The smart access gateway already bound. | The Smart Access Gateway instance is already associated. | |
| 400 | SmartAccessGatewayConnectionBroken | The connection is lost while your request is being processed. | The connection to the Smart Access Gateway device is interrupted. | |
| 400 | SmartAccessGatewayInArrears | The specified Smart Access Gateway has expired. | The Smart Access Gateway instance has expired and is suspended. Renew the instance. | |
| 400 | SmartAccessGatewayNoEnoughQuota | The number of SAG instances you ordered exceeded the quota. | The quota for purchasing the resource is insufficient. | |
| 400 | SmartAccessGatewayNotActivated | The specified Smart Access Gateway has not been activated. | The Smart Access Gateway instance is not activated. Activate the instance first. | |
| 403 | SmartAccessGatewayNotBind | The instance has not yet been bound. | The instance is not associated. | |
| 403 | SmartAccessGatewayNotOnline | The specified smart access gateway is not online. | The operation cannot be completed because the Smart Access Gateway instance is offline. | |
| 400 | SmartAccessGatewayOffline | The request cannot be completed. The Smart Access Gateway is offline. | The request cannot be completed because the Smart Access Gateway instance is offline. | |
| 400 | SmartAccessGatewayUpgrading | The specified smart access gateway instance is being upgraded. Please try again later. | The specified Smart Access Gateway instance is being upgraded. Try again later. | |
| 403 | SmartAGAlreadyAssociateAcl | The specified smart access gateway has already been associated with the specified ACL. | The selected Smart Access Gateway instance is already associated with an ACL. | |
| 400 | SmartAGAlreadyAssociateQos | The specified smart access gateway has already been associated with the specified QoS. | The Smart Access Gateway instance is already associated with a QoS policy. | |
| 403 | SmartAGNotAssociateAcl | The specified smart access gateway is not associated with the specified ACL. | The selected Smart Access Gateway instance is not associated with the selected ACL group. | |
| 400 | SmartAGNotAssociateQos | The specified smart access gateway is not associated with the specified QoS. | The QoS policy is not associated with the Smart Access Gateway instance. | |
| 400 | SmartAGNotAssociateQos | The specified smart access gateway does not associate with the specified QoS. | The Smart Access Gateway instance is not associated with a QoS policy. | |
| 400 | SmartAGUnderStock | The device resources are insufficient. | Insufficient resources. | |
| 400 | SNAT.AmountLimit | The maximum number of SNAT entries is exceeded. | The number of SNAT entries has reached the upper limit. | |
| 400 | SNAT.CidrConfigExist | The specified SNAT CIDR block already exists. | The SNAT CIDR block already exists. | |
| 400 | SNAT.InstanceIdEmpty | The specified SNAT instance ID is invalid. | The SNAT instance ID is invalid. | |
| 400 | SNAT.InvalidCidr | The specified SNAT CIDR block is invalid. | The SNAT CIDR block is invalid. | |
| 400 | SNAT.InvalidIp | The specified SNAT destination IP is invalid. | The SNAT destination IP address is invalid. | |
| 400 | SNAT.SnatDnatIpConflict | The SNAT destination IP address is the same as the DNAT IP address. | The SNAT destination IP address conflicts with the DNAT IP address. | |
| 400 | SNAT.SnatEntryConflict | The specified SNAT CIDR block already exists. | The SNAT CIDR block conflicts. | |
| 400 | SystemBusy | The system is busy. Please try again later. | The system is busy. Try again later. | |
| 429 | Throttling | The request was denied due to API flow control. | The request is rejected due to throttling. | |
| 500 | TunnelIdDistributeError | Tunnel id distribute error. | An error occurred while allocating the tunnel ID. | |
| 403 | TunnelIdNotEnough | Tunnel id is not enough. | Insufficient tunnel IDs. | |
| 403 | UnauthorizedRegion | You are not authorized in the specified region of %s. | You do not have permissions in the %s region. | |
| 403 | UnauthorizedZone | You are not authorized in the specified zone of %s. | You do not have permissions in the %s zone. | |
| 403 | UnsupportedFeature | This feature is not supported in the current Smart Access Gateway software version. | The current software version of the Smart Access Gateway instance does not support this feature. Upgrade the version and try again. | |
| 400 | UnsupportedFeature.ApplicationAccelerate | The feature of ApplicationAccelerate is not supported. | The application acceleration feature is not supported. | |
| 400 | UnsupportedRegion | The feature of %s is not supported in the region of %s. | The %s feature is not supported in the %s region. | |
| 400 | UnsupportedZone | The feature of %s is not supported in the zone of %s. | The %s feature is not supported in the %s zone. | |
| 403 | UpdateError.CCN | Update cloud connect network error. | Failed to update the Cloud Connect Network (CCN). | |
| 400 | UpdateError.Qos | An error occurred while updating the QoS. | An error occurred while updating the QoS policy. | |
| 500 | UpdateError.SMARTAG | Update smart access gateway error. | An error occurred while updating the Smart Access Gateway instance. | |
| 400 | Upgrading | The specified Smart Access Gateway is being upgraded. | The Smart Access Gateway instance is being upgraded. Try again later. | |
| 403 | VbrConflict.ChangeSubnet | The subnet of the gateway conflicts with the VBR. Modify the subnet first. | The subnet CIDR block of the Smart Access Gateway instance conflicts with the VBR. Modify the subnet CIDR block. | |
| 403 | VbrConflict.CreateBackup | The subnet of the gateway conflicts with the VBR. Create a backup relationship first. | The subnet CIDR block of the Smart Access Gateway instance conflicts with the VBR. Create a standby connection first. | |
| 400 | Version.InvalidCronExpression | The specified upgrade time is invalid. | The upgrade time is invalid. | |
| 400 | Version.InvalidDuration | The specified upgrade duration is invalid. | The upgrade duration is invalid. | |
| 400 | Version.InvalidTimeZone | The specified time zone is invalid. | The time zone is invalid. | |
| 400 | Version.InvalidUpgradeType | The specified upgrade type is invalid. | The specified upgrade type is invalid. | |
| 400 | VersionNotExist | The specified version does not exist. | The specified version does not exist. | |
| 403 | VersionTooOld | The specified version is outdated; please select a newer version. | The specified version is outdated. Select a later version. | |
| 400 | CcnExistCen | CCN already exists in CEN. | The record of associating the CCN with the CEN already exists. | |
| 400 | CcnNotInCen | CCN is not attached to CEN. | The record of associating the CCN with the CEN is not found. | |
| 400 | CcnDeleting | CCN is being deleted, please do not operate repeatedly. | The CCN is being deleted. Try again later. | |
| 400 | CcnCenCallFailed | CCN bind CEN call failed. | Failed to associate the CCN with the CEN. | |
| 400 | CenNotExist | CEN does not exist. | The specified CEN does not exist. | |
| 400 | CcnNotSupportNewAgw | The specified cloud connect network does not support this operation. | The CCN does not support this operation. Refresh the page and try again. | |
| 400 | DetachCenFailed | Failed to detach Cen. | Failed to disassociate the CEN. | |
| 400 | CenUnbindingInProgress | CEN unbinding is in progress, please try again later. | The CEN disassociation is in progress. Try again later. | |
| 400 | CenBindingInProgress | CEN binding is in progress, please try again later. | The CEN association is in progress. Try again later. | |
| 400 | UnBinding | The specified instance id unbinding. | The Smart Access Gateway instance is being disassociated. Try again later. | |
| 400 | SubnetConflict.SagRoute | The Internet segment of the cloud connection network conflicts with the static route of the smart access gateway. Please modify the conflicting network segment. | The Internet CIDR block of the Cloud Connect Network (CCN) has a route conflict with the static routing of the Smart Access Gateway. Modify the conflicting CIDR block. | |
| 400 | InsufficientCidrBlock.Subnet | The subnet %s can only hold %d /28 cidr blocks, which is not enough for %d regions. | The unified CIDR block %s can be divided into at most %d /28 relay CIDR blocks, which is insufficient for %d regions. | |
| 400 | ModifyNotAllowed.CidrBlock | The cidr block of region %s can not be changed from %s. | Region %s already has the relay CIDR block %s and cannot be modified. | |
| 400 | ModifyNotAllowed.Subnet | The subnet can not be changed from %s. | The unified CIDR block cannot be modified after association. The current CIDR block is %s. | |
| 400 | InvalidParameter.RegionBinding | The region binding parameter is invalid, %s. | The network association parameter is invalid: %s. | |
| 400 | CidrAllocationModeMismatch | The cidr allocation mode must be the same as %s used by the %s binding. | The CIDR block allocation mode must be %s to be consistent with the existing %s association. | |
| 400 | CidrBlockConflict.ExistingCidrBlock | The cidr block %s of region %s overlaps with the existing cidr block %s of region %s. | The CIDR block %s in region %s conflicts with the existing relay CIDR block %s in region %s. Change the CIDR block. | |
| 400 | ModifyNotAllowed.CidrAllocationMode | The cidr allocation mode can not be changed from %s. | The CIDR block allocation mode cannot be modified after association. The current mode is %s. | |
| 400 | SubnetConflict.SagRoute | The subnet "%s" of cloud connect network is conflict with the static route "%s" of smart access gateway "%s". Please change the conflicting cidr. | The Internet CIDR block "%s" of the Cloud Connect Network conflicts with the static route "%s" of the Smart Access Gateway "%s". Modify the conflicting CIDR block. | |
| 400 | ModifyNotAllowed.SubnetNotCoverUsedCidr | The subnet %s does not contain the cidr block %s used by region %s. | The new unified CIDR block %s does not contain the relay CIDR block %s in region %s that is already in use. | |
| 400 | OperationUnsupported.CcnBindingAccount | The account used for the current binding does not support adding regions. Unbind all regions, wait for unbinding to complete, and then bind again. | The account used for the current association does not support adding regions. Disassociate all regions first, and then re-associate them after the disassociation is complete. | |
| 400 | Ccn.UnifiedSubnetNotCoverUsedCidr | In UNIFIED mode, the unified subnet can be changed only when the new subnet contains all the /28 relay cidr blocks that are in use, and the specified subnet does not contain all of them. | In unified CIDR block mode, the unified address pool CIDR block can be changed only when the new CIDR block contains all /28 relay CIDR blocks in use. The specified CIDR block does not contain all of them. | |
| 400 | Ccn.VpcBindLimitExceeded | The total number of the bound vpcs and the newly added vpcs exceeds the upper limit of the cloud connect network. | The total number of attached VPCs and newly added VPCs exceeds the upper limit of the Cloud Connect Network (CCN) instance. | |
| 400 | Ccn.RegionBindingListInvalid | The region binding list is invalid. It must not be empty, each item must specify the region id and the binding instance id that matches the binding type, and the region id and the instance id must not be duplicated. | The region association list is invalid. The list cannot be empty. Each item must contain a region ID and an instance ID that matches the association type. Region IDs and instance IDs cannot be duplicated. | |
| 400 | Ccn.UnifiedSubnetInvalid | In UNIFIED mode, the unified subnet is required, and its prefix length must not be greater than 28. | In unified CIDR block mode, the unified address pool CIDR block must be specified, and its mask length cannot be greater than 28. | |
| 400 | Ccn.SubnetFormatInvalid | The specified cidr block is not a valid ipv4 cidr block whose prefix length is between 8 and 28, or it overlaps with 100.64.0.0/10, 224.0.0.0/4, 127.0.0.0/8 or 169.254.0.0/16 that are reserved by vpc. | The specified CIDR block is not a valid IPv4 CIDR block with a mask length between 8 and 28, or it overlaps with the VPC reserved CIDR blocks 100.64.0.0/10, 224.0.0.0/4, 127.0.0.0/8, and 169.254.0.0/16. | |
| 400 | Ccn.CidrAllocationModeUnmodifiable | The cidr allocation mode is determined when the first binding of this type is created, and it can not be changed while the binding of this type exists. | The CIDR block allocation mode is determined during the first association of this type and cannot be changed while the association of this type exists. | |
| 400 | Ccn.RegionNotBound | The region to be detached has no transit router or vpc that is bound to the cloud connect network. | No transit router or VPC attached to the Cloud Connect Network (CCN) instance is available for routing in the region to be detached. | |
| 400 | Ccn.CidrAllocationModeMismatch | The transit router binding and the vpc binding of one cloud connect network must use the same cidr allocation mode, and the specified mode is different from the mode that is in use. | The transit router and VPC attachments of the same Cloud Connect Network (CCN) instance must use the same CIDR block allocation mode for routing. The specified mode is different from the current effective mode. | |
| 400 | Ccn.UnifiedSubnetCapacityInsufficient | In UNIFIED mode, the number of the /28 relay cidr blocks that the specified unified subnet can be divided into is less than the number of the regions that need a relay cidr block in this request. | In unified CIDR block mode, the number of /28 relay CIDR blocks that can be divided from the specified unified address pool CIDR block is less than the number of regions that require relay CIDR block allocation in this request. | |
| 400 | Ccn.RegionCidrBlockOverlap | The /28 cidr blocks that are specified for the regions in this request overlap with each other. | The /28 CIDR blocks specified for different regions in this request overlap. | |
| 400 | Ccn.BindingRegionUnmodifiable | The region of a transit router or a vpc is determined when it is bound, and this operation can not change the region of a bound instance. | The region of the transit router or VPC is determined during association. This operation cannot change the region of the associated instance. | |
| 400 | Ccn.SubnetConflictWithSagRoute | The cidr block of the cloud connect network overlaps with the static route of a smart access gateway that is bound to the cloud connect network. | The CIDR block of the Cloud Connect Network (CCN) instance overlaps with the static routing of the Smart Access Gateway attached to the instance. | |
| 400 | Ccn.BindingAccountUnsupported | The account that is used by the current binding of the cloud connect network does not support adding a new region. | The account used for the current Cloud Connect Network (CCN) instance attachment does not support adding regions. Detach all regions before adding new ones. | |
| 400 | Ccn.CenIdNotAllowed | The cen id is not supported when a vpc is attached to or detached from the cloud connect network. | Specifying a CEN instance ID is not supported when attaching or detaching a VPC to a Cloud Connect Network (CCN) instance. | |
| 400 | Ccn.RegionCidrBlockUnmodifiable | In the per region cidr block mode, the /28 relay cidr block that has been allocated to a region can not be changed, because the transit router and the vpc of the same region share one relay cidr block. | In region-specific CIDR block mode, the /28 relay CIDR block allocated to a region cannot be changed because the transit router and VPC in the same region share the same relay CIDR block. | |
| 400 | Ccn.RegionCidrBlockInvalid | In the per region cidr block mode, each region to be bound requires one ipv4 /28 cidr block, and the items of the same region must specify the same cidr block. | In region-specific CIDR block mode, an IPv4 /28 CIDR block must be specified for each region to be associated, and all association items in the same region must use the same CIDR block. | |
| 400 | Ccn.CidrAllocationModeInvalid | The cidr allocation mode is invalid. It must be either the unified subnet mode or the per region cidr block mode. | The CIDR block allocation mode is invalid. It must be set to the unified CIDR block mode or the region-specific CIDR block mode. | |
| 400 | Ccn.RegionCidrBlockConflict | In the per region cidr block mode, the specified /28 cidr block overlaps with the relay cidr block of another region of the cloud connect network. | In the region-specific CIDR block mode, the specified /28 CIDR block overlaps with the relay CIDR blocks of other regions in the Cloud Connect Network (CCN) instance. | |
| 400 | Ccn.VpcBindingParamInvalid | The parameters for attaching a vpc to the cloud connect network or detaching a vpc from it are invalid. | The request parameters for attaching or detaching a VPC to or from the Cloud Connect Network (CCN) instance are invalid. | |
| 400 | Ccn.VpcNotBound | The vpc to be detached is not attached to the cloud connect network, or it has been detached. | The VPC to be detached is not attached to the Cloud Connect Network (CCN) instance, or it has already been detached. | |
| 409 | Ccn.VpcBindingOperationConflict | The vpc binding operation of the cloud connect network can not be accepted now, because a related binding or unbinding task is in progress, or a dependent service is temporarily unavailable. | The VPC attach or detach operation for the Cloud Connect Network (CCN) instance cannot be processed. A related attach or detach node is in progress, or a dependent service is temporarily not active. | |
| 400 | Ccn.VpcAlreadyBound | The vpc has already been attached to the cloud connect network. | The VPC is already attached to the Cloud Connect Network (CCN) instance. | |
| 400 | Ccn.InstanceUnavailable | The cloud connect network does not exist or is not in a state that allows the network binding operation. | The Cloud Connect Network (CCN) instance does not exist, or its current state does not allow you to execute network attach operations. | |
| 400 | Ccn.CenBindingParamInvalid | The parameters for attaching the cloud connect network to a cen or detaching it from a cen are invalid. | The request parameters for attaching or detaching a CEN instance to or from the Cloud Connect Network (CCN) instance are invalid. | |
| 400 | Ccn.BindingTypeConflict | The cloud connect network can not be attached to a cen and a vpc at the same time. | A Cloud Connect Network (CCN) instance cannot be attached to both a CEN instance and a VPC at the same time. | |
| 400 | Ccn.VpcBindingExists | The cloud connect network can not be deleted, because it still has a vpc attached. | The Cloud Connect Network (CCN) instance still has attached VPCs and cannot be deleted. | |
| 400 | Ccn.SubnetConflictWithNetwork | The specified cidr block of the cloud connect network, which is the unified subnet in the unified subnet mode or the /28 cidr block of a region in the per region cidr block mode, overlaps with the cidr block of a network that is attached or to be attached to the cloud connect network, such as a vpc. | The specified Cloud Connect Network (CCN) CIDR block overlaps with the CIDR block of an attached or to-be-attached network, such as a VPC CIDR block. In the unified CIDR block pattern, this refers to the unified IPAM pool CIDR block. In the region-specific CIDR block pattern, this refers to the /28 CIDR block of each region. |
Is this page helpful?