Public error codes
Updated at:
Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 404 | ResourceNotFound.VPC | The specified resource of %s is not found. | The specified VPC does not exist. | |
| 400 | IllegalParam.TagValue | The param of %s is illegal. | The TagValue parameter value is invalid. | |
| 400 | IllegalParam.TagKey | The param of %s is illegal. | The TagKey parameter value is invalid. | |
| 400 | MissingParam.TagValue | The parameter TagValue is mandatory. | The TagValue parameter is missing. | |
| 400 | MissingParam.TagKey | The parameter TagKey is mandatory. | The TagKey parameter is missing. | |
| 400 | IllegalParam.AliUid | The param of %s is illegal. | The AliUid parameter value is invalid. | |
| 400 | Conflict.VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr | The VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr [%s] is conflict. | The VSwitchCidrReservationMask does not match the VSwitchCidrReservationCidr. | |
| 400 | IllegalParam.Ipv6LeaseTime | Ipv6LeaseTime [%s] is illegal. | The specified Ipv6LeaseTime parameter is invalid. | |
| 400 | OperationDenied.UnsupportedUpdateCloudServiceRoute | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | The operation is not allowed because the current account does not have the permission to update VPC cloud service routes. | |
| 400 | OperationDenied.CidrConflictWithExistCidr | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry. | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry %s. | |
| 400 | OperationDenied.UnsupportedEssentialOnlyRouteMode | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | The operation is not allowed because the current account does not have the permission to use the EssentialOnly routing mode. | |
| 400 | OperationDenied.CloudBoxVSwitchNotExist | The specified cloud box VSwitch does not exist in the opposite VPC. Please ensure the opposite VPC has a cloud box VSwitch before creating the router interface. | The specified CloudBox vSwitch does not exist in the peer VPC. Make sure that the CloudBox vSwitch exists in the peer VPC before you create a router interface. | |
| 400 | OperationFailed.VbrNotEnableIpv6 | IPv6 is not enabled for the specified VirtualBorderRouter. Please enable IPv6 on the VBR before configuring IPv6 addresses. | The specified Virtual Border Router (VBR) does not have IPv6 enabled. Enable IPv6 on the VBR before you configure an IPv6 address. | |
| 400 | OperationFailed.VbrAttachCenOrEcrOnlyStableStatus | The VirtualBorderRouter is currently attaching to CEN or ECR and is in a transitional state. Please wait until the attachment reaches a stable status before retrying. | The Virtual Border Router is being associated with a CEN or ECR and is in a transitional state. Wait until the association operation reaches a stable state and try again. | |
| 400 | UnsupportedFeature.FlowEncryption | The flow log does not support subscription flow-encryption fields. | The flow log does not support subscribing to the flow-encryption field. | |
| 400 | UnsupportedFeature.LogFormatNisTrafficAnalyze | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | Flow logs with NIS Traffic Analyzer enabled do not support custom subscribe fields. | |
| 400 | UnsupportedFeature.LogFormat | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | The custom subscription field feature for flow logs is not yet available. | |
| 400 | OperationDenied.NisRequiredFieldMissing | Required fields required by NIS Traffic Analyzer are not subscribed. | The required fields for the NIS Traffic Analyzer are not subscribed. | |
| 400 | OperationDenied.UnsupportedField | LogFormat contains unsupported fields. | The LogFormat contains unsupported fields. | |
| 400 | IllegalParam.LogFormat | The specified parameter of LogFormat is invalid. | The specified LogFormat parameter is invalid. | |
| 400 | InvalidParam.RouterInstanceOrRouterId | The parameters routerInstanceId and routerId are mutually exclusive. Please use either routerInstanceId alone, or routerType with routerId. | The request contains conflicting parameters. Provide only routerInstanceId, or provide both routerType and routerId. Remove the conflicting parameter combination from the request. | |
| 400 | OperationDenied.PrefixList | The prefix list is created by ECS and cannot be modified via VPC API. | The prefix list was created by ECS and cannot be modified through VPC API operations. | |
| 400 | IncorrectStatus.RouteTableStatus | Route table [%s] status [%s] is not stable. Please try again later. | The route table [%s] is in the [%s] state, which is not a stable state. Try again later. | |
| 400 | DependencyViolation.NATGW | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | The vSwitch cannot be deleted because it still contains NAT gateways that have not been deleted. Delete the NAT gateways associated with the vSwitch before you delete the vSwitch. | |
| 500 | ParamExclusive.SourceVSwitchIdAndsourceCIDR | Parameters sourceVSwitchId and sourceCIDR are conflicted. | The sourceVSwitchId and sourceCIDR parameters conflict with each other. Specify only one of them. | |
| 400 | IllegalParam.OriginalCidr | The specified OriginalCidr is not a valid IPv4 CIDR block. | The specified OriginalCidr is not a valid IPv4 CIDR block. | |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | The operation is prohibited because the resource is a shared resource. | |
| 400 | OperationDenied.HasSecondaryZone | The operation is not allowed because the VSwitch has a secondary zone. | The operation is not allowed because the vSwitch has a secondary zone. | |
| 400 | OperationDenied.VpcIpv6CidrBlockNotExist | The specified VpcIpv6CidrBlock does not exist in the VPC. | The specified VpcIpv6CidrBlock does not exist in the VPC. | |
| 400 | OperationDenied.AvailableCidrInsufficient | Insufficient available CIDR blocks for allocation. This is either because the VPC has no remaining address space, or because the candidate CIDR contains destination networks of active non-system routes in the VPC. | Insufficient available CIDR blocks for allocation. The VPC address space may be exhausted, or the candidate CIDR block may contain destination CIDR blocks of non-system routes that are effective in the VPC. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The specified Ipv6CidrMask is invalid, only %s is allowed. | The specified Ipv6CidrMask is invalid. Only %s is allowed. | |
| 400 | ParamExclusive.CidrBlockAndCidrMask | CidrBlock and CidrMask are mutually exclusive. | The CidrBlock and CidrMask parameters are mutually exclusive. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Ipv6CidrBlock or Ipv6CidrMask must be specified. | You must specify either Ipv6CidrBlock or Ipv6CidrMask. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask must be specified. | You must specify either CidrBlock or CidrMask. | |
| 400 | CalculateNatCapacity.CpsNotPositive | Cps must be positive. | The Cps value must be a positive number. | |
| 400 | CalculateNatCapacity.PpsNotPositive | Pps must be positive. | The Pps value must be a positive number. | |
| 400 | CalculateNatCapacity.BandwidthNotPositive | Bandwidth must be positive. | The bandwidth value must be a positive number. | |
| 400 | CalculateNatCapacity.MetricRequired | PerformanceValues must have at least one field when CapacityUnits is not provided. | You must specify at least one metric. | |
| 400 | CalculateNatCapacity.InputRequired | Either NatGatewayCapacity.CapacityUnits or PerformanceValues must be provided. | You must specify either Cu or a metric value. | |
| 400 | InvalidCu.NotPositive | CapacityUnits must be positive. | The specified CU value must be a positive number. | |
| 400 | InvalidCu.ExceedMaximum | CU %s exceeds maximum %s. | The number of CUs exceeds the maximum limit. | |
| 400 | InvalidCu.BelowMinimum | CU %s is below minimum %s. | The number of CUs is less than the minimum limit. | |
| 400 | EquivalentCuExceeds.Maximum | Equivalent CU %s exceeds maximum %s. | The equivalent number of CUs exceeds the maximum limit. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | The IP address quota of the address pool is exceeded. To increase the quota, submit a ticket or contact your account manager. | |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | The EIP quota is exceeded. To increase the quota, submit a ticket or contact your account manager. | |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | Express Connect circuits of the Local ISP type can be released only 30 days after creation. Try again after 30 days. | |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | The current business status of the Express Connect circuit does not support this operation. | |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | The status switch delay command attribute is not in the enabling status in the current region. | |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | The access device does not support the LinkDelay feature. | |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | The state transition delay parameter value is invalid. | |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | Shared Express Connect circuits do not support the state transition delay command configuration. | |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | The state transition delay command is not supported. | |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | The specified original CIDR block is not a primary or secondary CIDR block of the VPC. | |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | IPv6 operations are not allowed when the vSwitch has a secondary zone configured. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | Specifying CidrBlock or CidrMask is not allowed in Ipv6Only mode. | |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | The VPC does not have available CIDR space for allocation. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | The specified IPv6 mask is invalid. Only %s is supported. | |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock and Ipv6CidrMask cannot be specified at the same time. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | At least one of Ipv6CidrBlock or Ipv6CidrMask must be specified. | |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | At least one of CidrBlock or CidrMask must be specified. | |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask cannot be specified at the same time. | |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | The specified IPv6 ISP %s does not match the IPv6 ISP %s of the IPAM pool. | |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | Failed to create the Express Connect circuit. No eligible access device is available after excluding redundant circuits. | |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | Failed to create the Express Connect circuit. No access device matches the specified optical module. | |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | Failed to create the Express Connect circuit. No access device matches the specified advanced device capabilities. | |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | The CidrBlock and SecondaryCidrBlock parameters are mutually exclusive and cannot be specified at the same time. | |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | The operation is rejected. The reduced target CIDR block does not cover the existing vSwitch CIDR block %s. | |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | The operation is rejected. The expanded target CIDR block overlaps with the existing CIDR block %s of the VPC. | |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | The operation is rejected. The target CIDR block does not overlap with the original CIDR block. CIDR block adjustment requires an overlap between the two. | |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | The operation is rejected. The target CIDR block is the same as the original CIDR block. No modification is required. | |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | The operation is rejected. The specified secondary CIDR block does not exist in the current VPC. | |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | The NewSecondaryCidrBlock parameter must be specified when modifying a secondary CIDR block. | |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | A required parameter is missing. At least one of CidrBlock or SecondaryCidrBlock must be specified. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | The zone of the secondary zone vSwitch does not support dual-tunnel VPN creation. Use a different vSwitch. | |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | The DisasterRecoveryVSwitchId parameter is missing. | |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | The specified vSwitch does not exist in this region. | |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber is supported only for the Prefix reservation type. | |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | The deep pagination page-skipping rate has been throttled. Reduce the frequency of deep pagination page-skipping, or use sequential pagination. | |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | When BGP is enabled for an IPsec-VPN connection, the ASN must be configured on the customer gateway. | |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | The specified policy-based route does not exist. | |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | The OwnerId parameter is invalid. Verify that the parameter is correct and try again. | |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | The EcrInstanceId parameter is missing. | |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | The IP address does not exist. | |
| 400 | OperationFailed.Ipv6OnlyVSwitch | The operation is failed because the specified VSwitch is Ipv6 only. | The operation failed because the specified vSwitch is of the IPv6 Only type. | |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | The specified NAT gateway resource was not found when you created or modified the route target group. | |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | The current operation does not support route target groups whose member type is NAT gateway. | |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | The vSwitch information associated with the specified NAT gateway was not found. | |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | This region does not support adding a NAT gateway as a route target group member. | |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | The NAT gateway in the route target group must have the ICMP echo reply feature enabled to ensure that ICMP probe packets can be properly responded to. | |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | The route target group supports only NAT gateways of the single-zone type. | |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | The next hop of the IPv6 route does not have an IPv6 address. | |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | The NAT gateway is referenced by a route target group. Delete the route target group first. | |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | The NAT gateway is referenced by a route target group. The ICMP echo reply feature cannot be disabled. | |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | The mask of the Cidr parameter or the CidrMask parameter is smaller than the minimum network mask length specified in the compliance rule of the IPAM pool. | |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | The mask of the Cidr parameter or the CidrMask parameter exceeds the maximum network mask length specified in the compliance rule of the IPAM pool. | |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | The specified VPN gateway has VPN connections that have not been deleted. | |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | The router type is invalid. | |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | The router interface is in an abnormal state. | |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | The router ID associated with the router interface cannot be empty. Verify the information and try again. | |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | The VPC IPv4 gateway corresponding to the IP address associated with the EIP is not associated with any gateway route table. | |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | The advanced port capability is not supported. Verify the information and try again. | |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | The VPC is associated with Express Connect Router (ECR) %s and cannot be deleted. | |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | The current user is not allowed to create a single-zone NAT gateway. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | Parameter conflict. After an IPv4 CIDR block is specified, creating an IPv6-only vSwitch is not supported. | |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | The resource is locked by the system and cannot be operated on at this time. | |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | The format of the authorization policy is invalid. | |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | Querying the traffic data of the current month is not supported in the 95th percentile billing mode. | |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | This operation does not support the region parameter. | |
| 400 | NatInstance.NotFound | Instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | The operation failed because an IP address in the SNAT rule IP address pool has not been added to an Internet Shared Bandwidth instance. | |
| 400 | Instance.NotFound | instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationUnsupported.User | The current user does not support this operation. | This operation is not supported for the current user. | |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | The operation failed because the region does not support the pay-as-you-go billing method. | |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | An order error occurred. The billing type parameter is unavailable. | |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | An order error occurred. The basic parameter information is incomplete. | |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | The current instance does not support configuring FullNat rules in domain name format. | |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | The current zone does not support configuring FullNat rules in domain name format. | |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | The current state of the route table does not support this operation. Try again later. | |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | Failed to create the NAT gateway. | |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | The current region is temporarily not supported. | |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | The operation failed because the IP addresses in the SNAT rule IP address pool are added to multiple NAT service plans. | |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | The operation failed because the EIP is not associated with this NAT gateway. | |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | The NAT IP address is in a transitional state. Try again later. | |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | The SNAT rule is in a transitional state or in an abnormal state. Try again later. | |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | The operation failed because the SNAT rule IP address pool is added to multiple NAT service plans. | |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | The operation failed because the EIP is not associated with this NAT gateway. | |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | The status of the traffic mirror source in the traffic mirror session is invalid. | |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | The status of the traffic mirror destination in the traffic mirror session is invalid. | |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | The current resource is still referenced by route entries. | |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | The operation is denied because the Express Connect circuit still has MACSec keys being associated. | |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | The current Express Connect circuit supports MACSec, but the selected encryption algorithm is not supported. | |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | The CKN to be disassociated does not exist. | |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | A maximum of three MACSec key groups can be associated with a single Express Connect circuit. | |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | The operation is not allowed because a MACSec key is in a transitional state. | |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | The current Express Connect circuit supports MACSec, but the selected encryption algorithm is not supported. | |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | The current Express Connect circuit does not support the MACSec feature. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | The status of the Express Connect circuit does not support this operation. | |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | IKEv1 does not support configuring only the gcm16 algorithm as the IKE encryption algorithm. | |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | The IP address of the customer gateway conflicts with the IP address of the VPN gateway. | |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | DES and 3DES do not support multi-algorithm compatibility in the IKE encryption algorithm and IPsec encryption algorithm. | |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | The TunnelBandwidth parameter is invalid. | |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | Creating a VPN attachment with high bandwidth is not supported. | |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | The current VPN instance does not support policy-based routing. | |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | The specified VPN gateway still has IPsec-VPN servers that have not been deleted. | |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | The AccessDomain request parameter is invalid. | |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | The specified AccessIp and AccessDomain parameters conflict with each other. | |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | The VLAN of the specified Virtual Border Router is 0, which does not support fault simulation. Use the Express Connect circuit for fault simulation. | |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | The specified EIP allocation token has expired. | |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | Dual-stack flow log instances do not support the custom trafficPath feature. | |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | The maximum number of route target groups that can be created in the VPC has been reached. Increase the quota before you proceed. | |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | A primary/secondary switchover is not allowed when a disabled member is in an abnormal health check state. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | Updating an enabled member in the route target group is not allowed. | |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | The current zone has been disabled. Creating a vSwitch in this zone is not allowed. | |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | The network ACL is being associated with or disassociated from a vSwitch. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | Updating an enabled member in the route target group is not allowed. | |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | Members of the route target group cannot belong to the same zone. | |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | Updating the instance type of a route target group member is not allowed. | |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | The current zone is being decommissioned. Creating a vSwitch in a decommissioned zone is not allowed. | |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | The RelationKey parameter is missing. | |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | The quota for NatIp and Ipv4Prefix has been exceeded. | |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | The gateway does not support Ipv4Prefix. | |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | The quota for Ipv4Prefix has been exceeded. | |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | The IP version of the prefix list specified in the request does not match the actual IP version of the prefix list. | |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | If the maximum number of entries in the prefix list is increased, the maximum number of entries allowed for the associated network ACL instance will be exceeded. | |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | The operation is not allowed because the current physical port does not support advanced capabilities such as MPBGP and MPBGP-v6. | |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | The deletion failed. The shared port or dedicated port owner must perform the deletion. | |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | The physical port cannot be deleted because a Virtual Border Router exists under it. | |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | The VPC route table entry does not exist. | |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | A managed network interface controller (NIC) cannot be used as a traffic mirroring source. | |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | A resource associated with the VPC, such as a Cloud Enterprise Network instance, is being modified. Try again later. | |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | The VPC to which the route target group belongs does not match the VPC to which the route target configuration instance belongs. | |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | The operation is not allowed in the current state of the route target group. | |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | Updating the instance type of a route target group member is not allowed. | |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | You cannot update a member that is in the enabled state in the route target group. | |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | The instance types configured in the route target group must be the same. | |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | The instances configured in the route target group cannot belong to the same zone. | |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | The Ipv4Prefix already exists. Do not create it again. | |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | The Ipv4Prefix resource was not found. Check whether the Ipv4Prefix exists. | |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The NatIp or Ipv4Prefix is associated with an SNAT entry. The deletion cannot proceed. Delete the dependent SNAT entry first, and then try again. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid. It must be a /28 CIDR block. | |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | The NatIp belongs to an Ipv4Prefix and cannot be deleted individually. Delete the Ipv4Prefix instead. | |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid. It must be a /28 CIDR block. | |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | The DetectMultiplier parameter is missing. When you configure BFD packets, you must specify the send alert interval, accept alert interval, and detect multiplier at the same time. | |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | The MinTxInterval parameter is missing. When you configure BFD packets, you must specify the send alert interval, accept alert interval, and detect multiplier at the same time. | |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | The MinRxInterval parameter is missing. When you configure BFD packets, you must specify the send alert interval, accept alert interval, and detect multiplier at the same time. | |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | The specified resource %s does not exist. | |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | The route target group feature is not supported in the current region. | |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | The DhcpOptionsSetId parameter is missing. | |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | The NatIp resource has already been allocated. | |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | The Ipv4Prefix has already been allocated. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | The Ipv4Prefix parameter is invalid. | |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | The NatIp parameter is invalid. | |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | The Ipv4Prefix does not match the reserved CIDR block for a vSwitch. | |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | The traffic mirroring service has already been activated. Do not repeat the operation. | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | Internet bandwidth cannot be enabled for an IPv6 address that is attached to a cloud service type instance. | |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Insufficient Ipv4Prefix resources. | |
| 400 | OperationDenied.InvalidIpReservedByVSwitch | The specified ip address is the reserved address of the switch. | The specified IP address is a reserved address of the vSwitch. | |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The Ipv4Prefix resource does not exist. | |
| 404 | ResourceNotFound.VPC | The specified resource of %s is not found. | The specified VPC is not found. | |
| 400 | IllegalParam.TagValue | The param of %s is illegal. | The specified TagValue is illegal. | |
| 400 | IllegalParam.TagKey | The param of %s is illegal. | The specified TagKey is illegal. | |
| 400 | MissingParam.TagValue | The parameter TagValue is mandatory. | The parameter TagValue is mandatory. | |
| 400 | MissingParam.TagKey | The parameter TagKey is mandatory. | The parameter TagKey is mandatory. | |
| 400 | IllegalParam.AliUid | The param of %s is illegal. | The specified AliUid is illegal. | |
| 400 | Conflict.VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr | The VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr [%s] is conflict. | The specified VSwitchCidrReservationMask does not match the VSwitchCidrReservationCidr. | |
| 400 | IllegalParam.Ipv6LeaseTime | Ipv6LeaseTime [%s] is illegal. | The specified Ipv6LeaseTime parameter is illegal | |
| 400 | OperationDenied.UnsupportedUpdateCloudServiceRoute | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | |
| 400 | OperationDenied.CidrConflictWithExistCidr | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry. | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry %s. | |
| 400 | OperationDenied.UnsupportedEssentialOnlyRouteMode | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | |
| 400 | OperationDenied.CloudBoxVSwitchNotExist | The specified cloud box VSwitch does not exist in the opposite VPC. Please ensure the opposite VPC has a cloud box VSwitch before creating the router interface. | The specified CloudBox VSwitch does not exist in the peer VPC. Before creating a router interface, ensure that a cloud box VSwitch exists in the peer VPC. | |
| 400 | OperationFailed.VbrNotEnableIpv6 | IPv6 is not enabled for the specified VirtualBorderRouter. Please enable IPv6 on the VBR before configuring IPv6 addresses. | The IPv6 function is not enabled on the specified border router. Enable IPv6 on the VBR before configuring an IPv6 address. | |
| 400 | OperationFailed.VbrAttachCenOrEcrOnlyStableStatus | The VirtualBorderRouter is currently attaching to CEN or ECR and is in a transitional state. Please wait until the attachment reaches a stable status before retrying. | The border router is currently associated with CEN or ECR and is in the intermediate state. Wait for the associated operation to reach a steady state before retrying. | |
| 400 | UnsupportedFeature.FlowEncryption | The flow log does not support subscription flow-encryption fields. | The flow log does not support subscription flow-encryption fields. | |
| 400 | UnsupportedFeature.LogFormatNisTrafficAnalyze | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | |
| 400 | UnsupportedFeature.LogFormat | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | |
| 400 | OperationDenied.NisRequiredFieldMissing | Required fields required by NIS Traffic Analyzer are not subscribed. | Required fields required by NIS Traffic Analyzer are not subscribed. | |
| 400 | OperationDenied.UnsupportedField | LogFormat contains unsupported fields. | LogFormat contains unsupported fields | |
| 400 | IllegalParam.LogFormat | The specified parameter of LogFormat is invalid. | The format of the specified LogFormat parameter is illegal. | |
| 400 | InvalidParam.RouterInstanceOrRouterId | The parameters routerInstanceId and routerId are mutually exclusive. Please use either routerInstanceId alone, or routerType with routerId. | The request contains conflicting parameters. You need to provide only routerInstanceId, or both routerType and routerId. Please remove conflicting parameter combinations from the request. | |
| 400 | OperationDenied.PrefixList | The prefix list is created by ECS and cannot be modified via VPC API. | The prefix list is created by ECS and cannot be modified by using the VPC API. | |
| 400 | IncorrectStatus.RouteTableStatus | Route table [%s] status [%s] is not stable. Please try again later. | The specified route table is not in a stable state. | |
| 400 | DependencyViolation.NATGW | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | |
| 500 | ParamExclusive.SourceVSwitchIdAndsourceCIDR | Parameters sourceVSwitchId and sourceCIDR are conflicted. | The sourceVSwitchId and sourceCIDR of the parameters conflict. Only one of the parameters can be entered. | |
| 400 | IllegalParam.OriginalCidr | The specified OriginalCidr is not a valid IPv4 CIDR block. | The specified OriginalCidr is not a valid IPv4 CIDR block. | |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | Operations on shared resources are not allowed. | |
| 400 | OperationDenied.HasSecondaryZone | The operation is not allowed because the VSwitch has a secondary zone. | The operation is not allowed because the VSwitch has a secondary zone. | |
| 400 | OperationDenied.VpcIpv6CidrBlockNotExist | The specified VpcIpv6CidrBlock does not exist in the VPC. | The specified VpcIpv6CidrBlock does not exist in the VPC. | |
| 400 | OperationDenied.AvailableCidrInsufficient | Insufficient available CIDR blocks for allocation. This is either because the VPC has no remaining address space, or because the candidate CIDR contains destination networks of active non-system routes in the VPC. | The operation was rejected because the available CIDR block resources are insufficient. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The specified Ipv6CidrMask is invalid, only %s is allowed. | The specified Ipv6CidrMask is invalid, only %s is allowed. | |
| 400 | ParamExclusive.CidrBlockAndCidrMask | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask are mutually exclusive. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Ipv6CidrBlock or Ipv6CidrMask must be specified. | Ipv6CidrBlock or Ipv6CidrMask must be specified. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask must be specified. | Failed to add a CIDR block to the address pool because the CIDR block or mask parameter is missing. | |
| 400 | CalculateNatCapacity.CpsNotPositive | Cps must be positive. | Cps must be positive. | |
| 400 | CalculateNatCapacity.PpsNotPositive | Pps must be positive. | Pps must be positive. | |
| 400 | CalculateNatCapacity.BandwidthNotPositive | Bandwidth must be positive. | Bandwidth must be positive. | |
| 400 | CalculateNatCapacity.MetricRequired | PerformanceValues must have at least one field when CapacityUnits is not provided. | Any metric must be entered. | |
| 400 | CalculateNatCapacity.InputRequired | Either NatGatewayCapacity.CapacityUnits or PerformanceValues must be provided. | Cu or indicator value is required. | |
| 400 | InvalidCu.NotPositive | CapacityUnits must be positive. | The CU entered must be a positive number. | |
| 400 | InvalidCu.ExceedMaximum | CU %s exceeds maximum %s. | The CU exceeds the maximum limit. | |
| 400 | InvalidCu.BelowMinimum | CU %s is below minimum %s. | CU is less than the minimum limit. | |
| 400 | EquivalentCuExceeds.Maximum | Equivalent CU %s exceeds maximum %s. | Number of equivalent CUs exceeds the maximum limit. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | The number of IP addresses in the IPAM pool exceeds the quota limit. | |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | The Eip quantity quota exceeds the limit. If you need to increase the quota, please raise a ticket or contact your account manager. | |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | Local ISP can only be released after 30 days of creation. If you want to delete it, please do so after 30 days. | |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | The current business status of the physical connection does not support operations. | |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | The current region is not open state switching delay command characteristic switch | |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | Access device does not support LinkDelay feature | |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | State switch delay parameter value illegal | |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | The shared line does not support the configuration state switch delay command. | |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | Status switch delay command is not supported | |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | VSwitch with a secondary zone does not support IPv6 operations. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | The CidrBlock and Ipv6Only parameters are mutually exclusive. You cannot specify an IPv4 CIDR block when creating an IPv6-only vSwitch. | |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | No available CIDR block can be allocated from the VPC for the requested mask. | |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | The operation is not allowed because the specified IPv6 CIDR mask is invalid, only %s is supported. | |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. You must specify only one of them. | |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | Either Ipv6CidrBlock or Ipv6CidrMask must be specified when IPv6 is enabled. | |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | Either CidrBlock or CidrMask must be specified for creating a non-IPv6-only VSwitch. | |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask are mutually exclusive. You must specify only one of them. | |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | The specified IPv6 ISP does not match the IPv6 ISP configured in the IPAM pool. | |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | Failed to create a physical connection. No eligible access device has been excluded from the redundant connection. | |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | Failed to create a physical connection. There is no access device matching the input optical module. | |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | Failed to create a physical connection because there is no access device that meets the advanced capabilities of the device. | |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | The CidrBlock and SecondaryCidrBlock parameters are mutually exclusive and cannot be specified at the same time. | |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | The target CIDR block does not cover the existing vSwitch CIDR block %s after the CIDR block is shrunk. | |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | The target CIDR block overlaps with the existing CIDR block %s in the VPC. | |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | The target CIDR block does not overlap with the original CIDR block. The CIDR block resize requires an overlap between them. | |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | The target CIDR block is the same as the original CIDR block. Please specify a different CIDR block. | |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | The specified secondary CIDR block does not exist in the current VPC. | |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | The NewSecondaryCidrBlock parameter is required when modifying a secondary CIDR block. | |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | At least one of the CidrBlock and SecondaryCidrBlock parameters must be specified. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | A second vSwitch ID is not allowed when you create a VPN gateway in this region. | |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | The parameter DisasterRecoveryVSwitchId is missing. | |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber is only supported with Prefix reserved type. | |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | The number of deep pagination skip operations has triggered rate limiting. Reduce the frequency of deep page jumps, or use sequential paging. | |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | When BGP is enabled for IPSec connection, ASN needs to be configured on the customer gateway. | |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | The specified PBR route does not exist. | |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | The parameter OwnerId is invalid. Check whether the parameter is correct and try again. | |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | The parameter EcrInstanceId is missing. | |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | IP does not exist | |
| 400 | OperationFailed.Ipv6OnlyVSwitch | The operation is failed because the specified VSwitch is Ipv6 only. | The operation is failed because the specified VSwitch is Ipv6 only. | |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | The selected NAT gateway resource is not discovered when creating or modifying the routing target group. | |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | The current operation does not support routing target groups with members of the NAT gateway type. | |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | VSwitch information associated with the selected NAT gateway was not found. | |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | The region does not support the NAT Gateway as a member of the route target group. | |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | The NAT gateway in the route target group must enable the ICMP return function to ensure that ICMP detection packets can be responded to normally. | |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | A route target group only supports NAT gateways of a single AZ type. | |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | The next hop of an ipv6 route entry does not have any ipv6 address | |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | The current NAT gateway has a routing target group reference. Delete the reference first. | |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | The NAT gateway is referenced by the route destination group. You are not allowed to disable the ICMP Pickup function. | |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | The error message returned because VPN connections to the specified vpn gateway are not deleted. | |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | Invalid router type. | |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | The router interface status is abnormal. | |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | The router ID associated with the router interface cannot be empty. Check and try again. | |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | The advanced port capability is temporarily not supported. Please confirm and try again. | |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | The operation is not allowed because the VPC is attached to ECR %s. | |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | current user is not allowed to create a single az nat | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | Parameter conflict. After an IPv4 CIDR block is specified, creating an IPv6 single-stack vSwitch is not supported. | |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | The operating resource is locked by the system and cannot be operated temporarily. | |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | The policy format is invalid. | |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | Querying the current month traffic data in the 95 billing mode is not supported. | |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | This operation does not support the region parameter | |
| 400 | NatInstance.NotFound | Instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | The operation fails because the IP address in the Snat rule IP address pool is not added to the shared bandwidth packet. | |
| 400 | Instance.NotFound | instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationUnsupported.User | The current user does not support this operation. | The current user does not support this operation. | |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | CU-based billing for enhanced NAT gateways is not supported in the current region. | |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | Order error. The payment type parameter is not available. | |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | Order error, basic parameter information incomplete. | |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | The current instance does not support the configuration of the FullNat rule domain name. | |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | The current zone does not support the configuration of the FullNat rule domain name. | |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | The routing table status does not support this operation. Please try again later. | |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | Failed to create the NAT gateway. | |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | Enhanced NAT gateways are not supported in the current region. | |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | The operation failed because the IP in the SNAT rule IP address pool was added to multiple NAT bandwidth packets. | |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | The operation failed because the EIP is not bound to this NAT gateway. | |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | The current status of the NAT IP address is invalid. | |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | The specified SNAT entries are not in a stable state and cannot be operated. | |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | The operation failed because the SNAT rule IP address pool was added to multiple bandwidth packages. | |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | The operation is not supported because the association between the EIP and the NAT gateway failed validation. | |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | Incorrect state for source of traffic mirroring session | |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | The status of the intent of the traffic mirroring session is incorrect. | |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | The VPC cannot be deleted because it still contains custom route entries that have not been deleted. | |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | The current operation is rejected because there is still a MACSec key binding on the physical connection. | |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | The current physical connection supports MACSec, but does not support the selected encryption algorithm. | |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | The Ckn to be disassociated does not exist. | |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | A physical connection supports binding up to three sets of MACSec keys. | |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | The operation is not allowed because the MACSec key is in an unstable state. | |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | The current physical connection supports MACSec, but the selected encryption algorithm is not supported. | |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | The current physical connection does not support the MACSec feature. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | The Express Connect circuit is in an abnormal state. | |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | Ikev1 does not support IkeEncAlg of gcm16. | |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | The customer gateway and VPN gateway associated with the IPsec-VPN connection must not have the same gateway IP address. | |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | TunnelBandwidth is illegal. | |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | Large tunnelBandwidth VpnAttachment is unsupported. | |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | Current version of the VPN does not support pbr route entry. | |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | The resource cannot be deleted because it has dependent IPsec server resources. | |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | The AccessDomain parameter in the request parameter is invalid. | |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | The specified input AccessIp conflicts with the AccessDomain. | |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | The entered VBR VLAN is 0. Fault drill is not supported. Please use the physical connection for fault drill. | |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | the specified eip allocation token has expired | |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | Dual-stack flow log instances do not support custom trafficPath. | |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | The quota of %s is exceeded, usage %s/%s. | |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | The network ACL is being bound to or unbound from the switch. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | The operation is not allowed because of all members being in the same availability zone. | |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | The operation is not allowed because of the inability to update memberType. | |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | Parameters | |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | NatIp and Ipv4Prefix quota use overflow. | |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | The gateway does not support Ipv4Prefix. | |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | Ipv4Prefix quota usage overflow. | |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | the ip version of the prefix list you passed in is inconsistent with the actual ip version of the prefix list. | |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | If the prefix list increases the maximum number of entries, the quota for the maximum number of entries for the associated network ACL instance is exceeded. | |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | The operation is not allowed because the current physical port does not support advanced capabilities such as MPBGP and MPBGP-v6. | |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | When a virtual border router exists under a physical port, it cannot be deleted. | |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | The specified route entry does not exist. | |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | Bond eni is not allowed to be the source of traffic mirror. | |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | The resources associated with the VPC are not stable, such as CEN. Try again later. | |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | The VPC to which the route target group belongs is different from the VPC to which the route target configuration instance belongs. | |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | The current state of the RouteTargetGroup prohibits the operation. | |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | The operation is not allowed because of can not update instance type. | |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | The instance types configured for the route target group must be the same. | |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | The operation is not allowed because of all config in the same availableZone. | |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | This Ipv4Prefix has already been created. Do not re-create it. | |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | Resource Ipv4Prefix not found, please check that the Ipv4Prefix exists. | |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The Internet Shared Bandwidth instance has SNAT or DNAT entries that have not been deleted. Delete the SNAT or DNAT entries first. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | The parameter Ipv4Prefix is invalid and must be/28 network segment. | |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp belongs to Ipv4Prefix and cannot be deleted separately. Please delete the Ipv4Prefix directly. | |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid and must be in the/28 network segment. | |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | Missing parameter DetectMultiplier. When configuring BFD packets, you need to configure three parameters: the sending interval, the receiving interval, and the detection time multiple. | |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | Missing parameter MinTxInterval. When configuring BFD packets, you need to configure three parameters: the sending interval, the receiving interval, and the detection time multiple. | |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | Missing parameter MinRxInterval. When configuring BFD packets, you need to configure three parameters: the sending interval, the receiving interval, and the detection time multiple. | |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | The specified resource% s does not exist. | |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | The feature of RouteTargetGroup is not supported. | |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | Missing parameter DhcpOptionsSetId | |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | NatIp resources have been allocated. | |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | Ipv4Prefix have been allocated. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | The parameter Ipv4Prefix is illegal. | |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | The parameter NatIp is illegal. | |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | The reserved network segments of the Ipv4Prefix and VSwitch do not match. | |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | The traffic mirroring service has been activated. Do not repeat the operation. | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | the ipv6 ip address associated with the cloud service instance cannot be used for internet bandwidth. | |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Insufficient Ipv4Prefix resources. | |
| 400 | OperationDenied.InvalidIpReservedByVSwitch | The specified ip address is the reserved address of the switch. | the specified ip address is the reserved address of the switch | |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The resource Ipv4Prefix does not exist. | |
| 400 | UnsupportedFeature.JumboFrame | The jumbo frame feature is not supported in the current region. | The jumbo frame feature is not supported in the current region. | |
| 400 | ResourceInConfiguring.NodeId | The express connect router subinstance is not in a steady state and cannot operate. | The Express Connect Router (ECR) child instance is not in a stable state and cannot be operated on. | |
| 400 | IncorrectStatus.Ecr | The express connect router is not in a steady state and cannot operate. | The Express Connect Router (ECR) is not in a stable state and cannot be operated on. | |
| 400 | Forbidden.VpconnCrossBid | Not allow to create across bid virtual physical connection. | Cross-site pushing of shared ports is not allowed. | |
| 400 | OperationDenied.NotInWhiteList | User does not have permission to turn on jumbo frames. | You do not have the permission to enable jumbo frames. | |
| 400 | Mismatch.Ipv4PrefixAndNatIpCidr | The %s and %s are mismatched. | The Ipv4Prefix and NatIpCidr are mismatched. | |
| 400 | MissingParam.BandwidthPackageId | The parameter bandwidthPackageId is mandatory. | The bandwidthPackageId parameter is required. | |
| 400 | DuplicatedParam.ResourceIds | The parameter of ResourceIds contains duplicate values. | The ResourceIds parameter contains duplicate values. | |
| 400 | OperationFailed.ModifyEcmpRoute | Operation is failed because ecmp route can not modify. | The operation failed because modifying attributes such as the next hop is not supported for equal-cost multi-path (ECMP) routes. | |
| 404 | InvalidEipId.NotFound | The specified EIP instance does not exist. | The specified EIP does not exist. | |
| 400 | OperationFailed.ConflictWithSecondaryCidr | The modified cidr is conflict with the secondary cidr. | The operation failed because the modified CidrBlock conflicts with a secondary CIDR block. | |
| 400 | QuotaExceeded.SessionNumPerTarget | The quota of the number of traffic mirror sessions per target is exceeded. | The quota for the number of sessions that can be created for each traffic mirror destination has been exceeded. | |
| 400 | IllegalParam.Protocol | The specified Protocol %s is invalid. | The protocol parameter is invalid. | |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock %s is illegal. | The SourceCidrBlock parameter is invalid. | |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock %s is illegal. | The DestinationCidrBlock parameter is invalid. | |
| 400 | MissingParam.RouteTableId | The parameter RouteTableId is missing. | The required parameter RouteTableId is missing. | |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | The PublicIpAddressPoolId parameter is missing. | |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | The specified CIDR block mask is invalid. | |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | Assigning unassociated private IPv6 addresses is not supported. | |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | The current operation does not support private GUA addresses. | |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | The specified Ipv6Isp parameter is invalid. | |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | The specified mask or the mask of the CIDR block is not within the allowed range. | |
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | The ENI type cannot be a slave ENI. | |
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | The number of IPv6 CIDR blocks in the VPC has exceeded the limit. | |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | The specified IPv6 CIDR block overlaps with an existing CIDR block. | |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | The specified IpVersion does not match the IpVersion of the specified address pool. | |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | The IpVersion parameter is missing. | |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | The quota for IPv6 egress-only rules has been exceeded. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | The specified IPv6 instance already has IPv6 bandwidth enabled. Release the IPv6 bandwidth before performing this operation. | |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | The DHCP options set feature does not take effect in the current region. | |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | The instance type that you specified requires a Cloud Data Transfer (CDT) billing upgrade. Upgrade CDT and try again. | |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | A flow log instance that collects traffic for all scenarios has already been created for the specified resource. You cannot create another flow log instance that collects traffic for only some scenarios. | |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | The operation failed due to the %s quota limit. The mask of the reserved CIDR block exceeds the default mask of the current IP prefix, %s/%s. | |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | The ProjectName and LogStoreName parameters are invalid. You must specify both parameters or leave both parameters empty. | |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | The operation is not supported because the specified next hop instance of the route is associated with multiple IPv6 addresses. | |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | The AssociatedInstanceId parameter is missing. | |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | The operation failed because the instance is associated with a Cloud Enterprise Network (CEN) instance. | |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | The operation failed because the VPC contains public IPv6 addresses. | |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | The Virtual Border Router is locked. Try again later. | |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | The current resource failed to be associated with a VPC or CEN instance of another account. Check whether you have the required permissions and try again. | |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | The active tunnel and standby tunnel must be created at the same time. | |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | A VPC supports only one dynamic route learning source. Remove the VPC from the Express Connect Router (ECR). | |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | The architecture does not support BGP capabilities (single-tunnel bonding architecture VPN gateway). | |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | The VPC system route table does not have automatic propagation enabled for received routes. | |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | Residual BGP routes exist. Routing automatic propagation cannot be shutdown. | |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | The DestinationCidrBlock parameter is invalid. | |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | The SourceCidrBlock parameter is invalid. | |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | A VPC supports only one dynamic route learning source. Disable route synchronization for this VPC in the transit router. | |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | The vpc_trafficmirror_public resource does not have the product tag for enterprise cloud adoption. Internal enterprise users are not allowed to purchase this resource. | |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | The address [%s] under IPv6 gateway [%s] has Internet bandwidth enabled and belongs to shared user [%s]. Delete it and retry. | |
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | Traffic mirroring does not support full packet mirroring. TrafficMirrorSourceTruncateMode can only be set to 0, which is the default mode. | |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | The destination type of the current traffic mirror session does not support the full packet mirroring feature. | |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | The route table propagation status has not reached a stable state. Try again later. | |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | The RouteEntries parameter is missing. | |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | The GatewayRouteTableId and Ipv4GatewayRouteTableId parameters cannot both be empty. Use GatewayRouteTableId. | |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | The vSwitch to which the Local route belongs is associated with the current route table. Modifying its next hop is not allowed. | |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | Modifying Local routes in the system route table is not allowed. | |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | The specified vSwitch was not found. | |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | A required parameter is missing. | |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | The operation failed because the specified IPv6 CIDR block is already in use. | |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | The DNS domain name resource is not in a stable state. Try again later. | |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | The request is missing a required parameter. You must provide RouteEntryId, or provide both RouteTableId and DestinationCidrBlock. | |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | Failed to delete a VPC because the VPC still contains security group [%s] that has not been deleted. Delete the security group in the VPC first, and then delete the VPC. | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] being operated on depends on [%s]. Delete the dependent resource first, and then perform the operation. | |
| 400 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | The specified RegionId does not exist. | |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | The specified IPv6EgressOnlyRule is not in a stable state. | |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | The BindInstanceId parameter is missing. | |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | The traffic mirror source does not support the specified managed elastic network interface (ENI) type. | |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | The traffic mirror destination does not support the specified managed elastic network interface (ENI) type. | |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | The VPC private domain resolution feature is not available in the current region. | |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | The operation failed because the specified elastic network interface (ENI) and the route table do not belong to the same VPC. | |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | Neither TrafficAnalyzerId nor the ProjectName and LogStoreName parameters were provided. | |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | The VSwitchId parameter is missing. | |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | The operation failed because the specified VPC contains an Anycast elastic IP address (EIP). | |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | The transit router attachment does not have IPv6 enabled. | |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | The number of EIPs that can be associated in multi-pass-through mode exceeds the limit. | |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | The specified NAT IP address already exists. | |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | The resource owner ID parameter is invalid. | |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | The length of the AssociatedInstanceId parameter is invalid. | |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | The sampling interval of the flow log is greater than the sampling interval of the NIS Traffic Analyzer. | |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | The specified NIS Traffic Analyzer does not exist. | |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | When modifying the delivery destination of a flow log instance or enabling/disabling NIS network traffic analysis, a delivery type that is not allowed was specified. | |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | The specified NIS Traffic Analyzer is not in the enabled status. | |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | You have not completed real-name verification and do not meet the purchase requirements. Log on to the Account Center to complete real-name verification. | |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | The AssociatedInstanceId parameter is invalid. | |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | The default DHCP options set cannot be modified. | |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | The Type parameter is invalid. | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | The SNAT entry cannot use this EIP because it is already used in a DNAT entry (any port mapping). | |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | The operation is not supported. The NAT instance architecture does not match. | |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | The ECS elastic network interfaces (ENIs) quota does not meet the requirements. Verify that the network interface controller (NIC) quota is sufficient. | |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | The operation is denied because only system route tables support publishing routing entries. | |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | The operation was rejected because the CIDR block is not available in the IPAM pool. | |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | The specified contiguous EIP group instance does not exist. | |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | The vSwitch is being created. | |
| 400 | MissingParam.Resource | Missing parameter Resource. | The Resource parameter is missing. | |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | The specified Virtual Border Router (VBR) is not associated with a BondRI. Verify the association and try again. | |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | An unknown error occurred. Retry the operation. If the error persists, submit a ticket. | |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | The InstanceId parameter cannot be empty. | |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | The tag key or value is invalid. Specify a valid tag key or value and try again. | |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | The BondRI is in a non-stable state. Verify the instance status and try again. | |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | The operation is not allowed because the next hop type of the route is being modified from the Local type. | |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | The operation failed because the current region does not support modifying the next hop of IPv6 routes. | |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | The current VPN connection instance is authorized to a Cloud Enterprise Network (CEN) instance under another account through cross-account authorization. Revoke the cross-account authorization before deleting the VPN connection. | |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | The two zones specified when creating a dual-tunnel VPN connection must be different. | |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | The zone for dual-tunnel disaster recovery is not supported. | |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | The first zone specified in the request is unavailable. | |
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | The zone in the specified region is unavailable. | |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | The NAT gateway instance does not exist. | |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | The operation failed. Bandwidth limit configuration is not allowed. | |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | The backend service failed to query the ENI information. | |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | The specified access point does not exist or you do not have the permission to view it. | |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] being operated on depends on a reserved IPv6 CIDR block. Delete the dependent resource before performing this operation. | |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | The private domain name status of the current VPC does not support this operation. | |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | You have not completed real-name verification and do not meet the purchase requirements. Log on to the Account Center to complete real-name verification. | |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | The NAT gateway is not available in the current zone, or the underlying resources are insufficient. | |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | The NatIpCidr CIDR block already exists or overlaps with an existing CIDR block. | |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | The NatIpCidr parameter is invalid. | |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | The specified AccessMode.ModeValue and AccessMode.TunnelType parameters conflict with each other. | |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | The specified PrivateLinkEnabled and AccessMode parameters conflict with each other. | |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | The specified PrivateLinkMode and AccessMode parameters conflict with each other. | |
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | The AccessMode.ModeValue property of the VPC NAT gateway does not support this operation. | |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | The AccessMode.TunnelType request parameter is invalid. | |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | The AccessMode.ModeValue request parameter is invalid. | |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | The VPC NAT gateway failed to generate a tunnel ID. Try again later. | |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | The DNAT entry does not allow the public IP address to be the same as the private IP address. | |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The specified resource has dependencies. Dissociate the resource first. | |
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | The specified OwnerAccount parameter is invalid. | |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | The TargetType parameter is invalid. | |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | Published route entries do not support the creation of active/standby routes or load balancing routes. | |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bond elastic network interfaces (ENIs) are not supported as traffic mirror destinations. | |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | Gateway Load Balancer endpoints (GWLBe) are not supported as traffic mirror destinations. | |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | The account balance is insufficient. | |
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | The sales module parameters do not meet the constraint check requirements. | |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | The specified resource instance does not exist. | |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | The account balance is insufficient. | |
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | The account balance is insufficient. | |
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | The commodity pricing plan was not found. | |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | This VPC does not support certain advanced features. Submit a ticket for assistance. | |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | The specified IPAM pool does not support IPv6. | |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | When you modify the next hop of a Local route in a custom route table, the destination CIDR block of the Local route is the same as the CIDR block of a vSwitch associated with the route table. | |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | The VPC contains route tables of an earlier version. Submit a ticket for assistance. | |
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | The IP version of the EIP does not match that of the Internet Shared Bandwidth instance. | |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | An unsupported next hop type was specified when you attempted to modify the next hop of a Local route. | |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | The next hop of a Local route has already been modified. | |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | The Gateway Load Balancer endpoint instance was not found. | |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | This operation is not supported because a VPC can have only one IPv6 gateway. | |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | Only ULA-type IPv6 addresses are supported. | |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | This route type is not supported. | |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | This operation does not support ULA addresses. | |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | Virtual Border Routers (VBRs) do not support IPv6 routes. | |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | This operation does not support IPv6. | |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | IPv6 does not support ECMP routes. | |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | The specified IPv6CidrBlock is not supported. | |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | The specified region does not support vSwitch-level IPv6 egress-only rules. | |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | The Free Edition IPv6 gateway does not support creating IPv6 egress-only rules. Upgrade the IPv6 gateway to Enterprise Edition or Enhanced Enterprise Edition. | |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | This operation is not supported because IPv6 is not enabled. | |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | This operation is not supported because the zone ID does not match. | |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | The operation failed because the specified IPv6 CIDR block is already in use. | |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | This operation is not supported because IPv6 is not enabled for the VPC. | |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | The operation failed because the quota for standby route entries has been exceeded. | |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | The operation failed because this type of active route is not supported. | |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | The operation failed because the quota for active route entries is exceeded. | |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | The operation is not supported because the IPv6 instance does not have Internet bandwidth. | |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | The operation failed. The bandwidth of the IPv6 instance exceeds the maximum bandwidth limit of the gateway specification to be modified. | |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | The operation failed because IPv6 is already enabled. | |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | The operation failed because the next hop type is invalid. | |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | The operation failed due to an overdue payment. | |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | The operation failed. Only custom route entries support filtering by route entry ID or route entry name. | |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | The operation failed. The peer type of the specified route instance is invalid for ECMP. | |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | The operation failed because the default VPC does not exist. | |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | The operation failed. The new CidrBlock causes a route conflict with an existing routing entry. | |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | Bindng an L2 EIP to an IP address is not supported in this region. | |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | When you add a secondary CIDR block to a VPC without using an IPAM pool, you must specify either the SecondaryCidrBlock parameter or the Ipv6CidrBlock parameter, but not both. | |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | The EnableIpv6 parameter is missing. | |
| 400 | MissingParam.context | The param of context is missing. | The context parameter is missing. | |
| 400 | MissingParam.bid | The param of bid is missing. | The bid parameter is missing. | |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | The aliUid parameter is missing. | |
| 400 | MissingParam | Miss mandatory parameter. | A required parameter is missing. | |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | The specified VPC-connected instance is not found. | |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | The specified VPC-connected instance is not found. | |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | The current status of the ENI does not support this operation. | |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | The specified secondary CIDR block is not found. | |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | The specified route table is not found. | |
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | The specified EniInstanceId is invalid. | |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | The format of the specified IPv6ULACidrBlock is invalid. | |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | The specified IPv6 instance is not found. | |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | The specified IPv6GatewayId is not found. | |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | The specified IPv6 gateway is not found. | |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | The specified IPv6CidrBlock is not found. | |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | The specified VPC is not in a stable state. | |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | The route table [%s] is in the [%s] state, which is not a stable state. Try again later. | |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | The specified NAT gateway is not in a stable state. | |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | The current status of the IPv6 Internet bandwidth does not support creating an IPv6 egress-only rule. | |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | The current status of the specified EgressOnlyRule does not support deletion. | |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | The ZoneId parameter is invalid. | |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | The VpcIPv6CidrBlock parameter is invalid. | |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | The UserCidr parameter is invalid. | |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | The Spec parameter is invalid. | |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | The ServiceProvider parameter is invalid. | |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | The SecondaryCidrBlock parameter is invalid. | |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | The RouteEntryType parameter is invalid. | |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | The NextTokenExpired parameter is invalid. | |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | The Mode parameter is invalid. | |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | The IpVersion parameter is invalid. | |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | The IPv6CidrType parameter is invalid. | |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | The Ipv6CidrBlock parameter is invalid. | |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | The InstanceType parameter is invalid. | |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | The EnableIpv6 parameter is invalid. | |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | The Description parameter is invalid. | |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | The VPC cannot be deleted because it contains EPS resources. | |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | The VPC cannot be deleted because it contains an IPv6 gateway. | |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | The specified ClientToken already exists. | |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | The specified SecondaryCidrBlock already exists. | |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | The ChargeType parameter is invalid. | |
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | Disabling route propagation for this route table is not allowed. | |
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | The quota for Express Connect circuits that the user can create has been exceeded. Contact the administrator to increase the quota and try again. | |
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | The quota for Express Connect circuits that can be purchased for a single access point has been exceeded. Contact the administrator to increase the quota. | |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | Failed to retrieve the status of the Express Connect resource. Verify the resource information and try again. | |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | The IpVersion parameter is invalid. Verify the parameter and try again. | |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | When adding a BGP group, the peer autonomous system number cannot be the same as the local autonomous system number. Verify the parameter and try again. | |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | The operation is prohibited because publishing routes from a custom route table is not allowed. | |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | The route publish status of the route is incorrect. | |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | The route has already been published to another component. The specified next hop type does not support route publishing. | |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | The target instance for route publishing is not associated with the VPC. | |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | The operation is rejected because the target type for route publishing is currently not supported. | |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | The specified route table is not in a valid state. | |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | Publishing system route entries is not supported. | |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | The next hop type of the route does not support publishing. | |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | The publish route entry operation for route prefix list routing is not supported. | |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | When creating an SNAT rule for a NAT gateway instance, the SnatIp parameter and the NetworkInterfaceId parameter cannot be specified at the same time. | |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | When creating an SNAT rule for a NAT gateway with PrivateLink enabled, the NetworkInterfaceId parameter must be specified. | |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | When creating an SNAT rule for an Internet NAT gateway or VPC NAT gateway, the SnatIp parameter must be specified. | |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | This region does not support creating IPv6 address instances that are not associated with resources. | |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | This region does not support creating IPv6 prefix CIDR blocks that are not associated with resources. | |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | IPv6 cannot be shut down because the VPC contains IPv6 routing entries. Shutdown IPv6 after removing the IPv6 routing entries. | |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | The current region does not support assigning unassociated IPv6 address instances. | |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | The operation failed because IPv6 addresses within the IPv6 prefix are in use. | |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | The specified Ipv6Prefix parameter is invalid. | |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | The specified AddressType parameter is invalid. | |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | The router interface does not support IPv6. | |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | The BGP group autonomous system numbers of Virtual Border Routers (VBRs) in the failover group must be consistent with each other. | |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | The specified resource is insufficient. | |
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | The specified ENI or VM to bindto does not exist. | |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | Multiple invalid input parameters exist. | |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | The inventory of continuous EIPs is insufficient. | |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId and BandwidthPackageId are mutually exclusive. | |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId and RouteTableIdOrDestCidrBlock are mutually exclusive. | |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | The ProductType parameter is invalid. | |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | Insufficient resources: no matching CIDR block was found. | |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | Failed to apply for continuous EIPs. This service has been discontinued. Use the IP address pool service instead. | |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | The VBR failover group instance ID or VBR instance ID is missing. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | The Ipv6AddressId and Ipv6InternetBandwidthId parameters cannot both be empty. | |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | The specified resource does not exist. | |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | The current fault simulation task is in progress. Try again later. | |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | Fault simulation is not supported for a VBR in a single-VBR multi-physical-connection scenario. | |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId and VpnConnectionId are mutually exclusive. | |
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | The O&M event does not exist. | |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | The specified execution time of the O&M event must be before the latest execution time. | |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | The VPN gateway IP address does not exist. | |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | The specified PrivateIpAddress is invalid. Check the parameter constraints and try again after modification. | |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | The VBR instance is not authorized by the VPC instance. Authorize the VBR instance and try again. | |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | The VBR is bindto multiple Express Connect circuits. | |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | The Express Connect circuit does not exist. | |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | The Virtual Border Router does not exist. | |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | The operation cannot be executed because the border routing device is in the process of loading or unloading an Express Connect Router (ECR). Try again later. | |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | The BGP peer already created on the current VBR conflicts with the ECR configuration. Delete the BGP configuration and try again. | |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | The CIDR block does not exist. | |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | The operation is locked by another request. | |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | The specified next hop does not exist in the VBR route table. | |
| 400 | Idempotence.Processing | Idempotence request is processing. | The request is being processed by an idempotent operation. | |
| 400 | InvokeError | instance quota rule invoke error. | Failed to retrieve rule data. Try again later. | |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | The IPv6 CIDR block parameter is invalid. | |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | The UserCidr parameter is invalid. | |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | The EnableIpv6 parameter is missing. | |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | The IPv6 CIDR block is invalid. | |
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | The specified VPC instance does not exist. | |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | A required parameter is missing. | |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | The specified route name is invalid. | |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | The specified route entry does not exist. | |
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | The route has multiple next hops. | |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | The current access point information does not exist. Verify the information and try again. | |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | The operation cannot be performed on the current resource. Contact on-duty personnel for assistance. | |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | The current resource is not associated with an Express Connect Router (ECR). The operation cannot be performed. Verify the resource and try again. | |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | The specified BondRI instance does not exist. | |
| 500 | InternalError | Internal system error. | An internal system error occurred. | |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | The Virtual Border Router is already associated with an Express Connect Router (ECR). Remove the Virtual Border Router from the ECR and try again. | |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | The vSwitch to which the elastic network interface (ENI) belongs does not exist. | |
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | Failed to activate the IPAM pool service. Apply for the required permissions in Quota Center. | |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | The specified Zone parameter conflicts with the IpAddress or InstanceId parameter. | |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | Failed to allocate the frontend port. | |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | The NAT gateway of the specified instance type does not support enabling session logs. | |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | The current service status does not support creating an IPAM pool instance. | |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested IPAM pool service. Make sure that you have subscribed to the service that you are trying to use. | |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | The IPAM feature is not supported in this region. | |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | Failed to configure session logs due to an internal service error. | |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | The VPC still has static routes pointing to the ECR. You cannot disassociate the ECR until the routes are removed. | |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | The specified instance ID does not exist. | |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | The SessionLogDeliveryType parameter for the session log delivery destination type does not meet the requirements. | |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | The operation failed because you have not granted the permission for NAT session log delivery. | |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | The SessionLogDeliveryDestination parameter for the session log delivery destination has an invalid format. | |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | Failed to configure the NAT session log delivery rule. | |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | The operation failed because it involves a shared resource. | |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | Specify the IDaaSRegionId parameter when you enable two-factor authentication. | |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | The operation is not allowed because available CIDR is insufficient. | |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | The operation was rejected because the specified CIDR block is within an invalid CIDR block range. | |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | The dependent IPAM pool does not exist. | |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | The operation was rejected because the request was not sent from the region where the IPAM pool resides. | |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | The operation was rejected because you cannot create a VPC or add a secondary CIDR block to a VPC from an IPAM pool that does not have a region attribute. | |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | Specify the Cidr or CidrMask parameter when you create a resource from an IPAM pool. | |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | The access point type does not support creating high-availability Express Connect circuits. | |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | The IPAM pool cannot be empty. | |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | The specified Ipv4CidrMask is invalid. | |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | The SecondaryCidrMask parameter is required. | |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | The specified SecondaryCidrMask is invalid. | |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | The Alibaba Cloud-side BGP autonomous system number (ASN) of the BGP group must be the same as the ASN of the Express Connect Router (ECR). | |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | The router interface does not support IPv6. | |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | The VPC is not in a stable state. | |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | The specified prefix CIDR block must be within the reserved CIDR block for a vSwitch. | |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | The specified IPv6 prefix mask exceeds the quota. | |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | The operation failed because the resource is currently in the bindng state. | |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | The current VPN instance version does not support IDaaS 2.0. | |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | The specified IDaaS application instance ID is invalid. The application instance must be created based on a dedicated SSL-VPN template. | |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | The specified IDaaS application instance ID does not exist. | |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | The IDaaSApplicationId parameter is required when two-factor authentication is enabled. | |
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | The outbound cloud traffic service is already activated. Use it in the console. | |
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | The outbound cloud traffic service is already activated. Use it in the console. | |
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | The VBR is associated with an ECR. Disassociate the VBR from the ECR first. | |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface does not support IPv6. | |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | The NextHopType parameter is invalid. | |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | The current NAT gateway does not support modifying PrivateLinkMode. | |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | Creating a NAT gateway in Geneve mode is not supported. | |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | Alibaba Cloud plans to optimize and adjust the current region. Cloud services in this region will cease operations. To ensure your business continuity and a smooth data migration, you cannot place new purchase orders or similar order types at this time. Thank you for your understanding and support. | |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | Purchasing subscription instances is no longer supported. | |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | Invalid parameter: destination CIDR block. | |
| 400 | IllegalParam.Policy | Param Policy illegal. | Invalid parameter: Policy. | |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | Invalid parameter: Protocol. | |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | Invalid parameter: IpVersion. | |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | Invalid parameter: source CIDR block. | |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | The VBR failover group instance parameter is invalid. | |
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | The router interface is referenced by a route entry. | |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | Creating an egress-only rule on an IPv6 instance that is not associated with a resource is not supported. | |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | The dependent resource vSwitchCidrReservation does not exist. | |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | The Ipv6Prefix feature is not supported in this region. | |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | The router interface is in an abnormal state. | |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | The service type of the ENI used as the next hop of the route is invalid. | |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | The specified instance does not exist in the current region. | |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | The specified Day parameter is invalid. | |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | The operation failed because the resource UID does not exist. | |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | Insufficient Internet Shared Bandwidth resources. | |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | The operation is rejected because route table 1.0 exists. | |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | The ServiceLocation parameter is invalid. | |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | The EnableIpv6 and CidrBlock parameters are mutually exclusive. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | You cannot create a shared Express Connect circuit on a dedicated Express Connect circuit that is associated with a QoS policy. Contact your account manager. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | You cannot create a cross-account Virtual Border Router on a shared Express Connect circuit that is associated with a QoS policy. Contact your account manager. | |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | A QoS rule cannot contain both IPv4 and IPv6 address configurations. If the existing configuration network type is IPv4, you cannot change it to IPv6, and vice versa. Check and modify the configuration. | |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | The number of QoS rules in the QoS queue exceeds the upper limit. To increase the quota, contact your account manager. | |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | The total bandwidth percentage of normal-priority queues in the QoS policy exceeds the specification limit. | |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | The number of high-priority queues in the QoS policy exceeds the specification limit. To increase the quota, contact your account manager. | |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | The number of normal-priority queues in the QoS policy exceeds the specification limit. To increase the quota, contact your account manager. | |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | The current QoS policy is associated with an Express Connect circuit and cannot be directly deleted. Dissociate the QoS policy first and then retry. | |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | The device on which the Express Connect circuit resides does not support the QoS feature. | |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | In a scenario where a single Virtual Border Router (VBR) has multiple physical connections (Pconns), all Pconns must be bindable to QoS policies. | |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | A dedicated Express Connect circuit that contains a cross-account Virtual Border Router cannot be bindable to a QoS policy. | |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | A dedicated Express Connect circuit that contains shared Express Connect circuits cannot be bindable to a QoS policy. | |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | The current Express Connect circuit has an overdue payment. This operation cannot be performed. | |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | The current QoS configuration conflicts with another configuration. Try again later. | |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | The Express Connect circuit is already bindable to another QoS policy. | |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | The current Express Connect circuit is in an abnormal state. This operation cannot be performed. | |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | The current QoS policy is in an abnormal state. The operation cannot be performed. Try again later. | |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | The current user does not support creating QoS policies. Contact your account manager. | |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | The number of QoS policies for the current user exceeds the limit. Contact your account manager. | |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | The two vSwitches specified for creating a dual-tunnel VPN must belong to different zones. | |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | The zone of the vSwitch does not support creating dual-tunnel VPNs. Use a different vSwitch. | |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | You cannot delete a VPC because a transit router connection still exists. | |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | The current reserved CIDR block status does not support this operation. Try again later. | |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | The current operation is not allowed because your account has a pending specification change order that has not taken effect. | |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | The elastic IP address (EIP) instance already exists in the Internet Shared Bandwidth instance. | |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | The vSwitch is in an abnormal state. | |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | The current state of the route entry is invalid. | |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | No cluster IP address was obtained for the specified AvailableZoneId. | |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | When the traffic mirror source contains a NAT gateway network interface controller (NIC), the traffic mirror destination must be of the SLB type. | |
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | The Virtual Border Router is bindable to an Express Connect Router (ECR). Modifying the local AS number is not allowed. Disassociate the ECR first. | |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | The LocalAsn of the Virtual Border Router must be the same as the ASN of the Express Connect Router (ECR). | |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | The operation failed due to a binding operation failure. | |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | The security protection type of the EIP does not match the security protection type of the address pool. | |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | The specified SecurityProtectionTypes parameter is invalid. | |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | The current ISP does not support creating address pools with enhanced security protection. | |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | The specified IPv6 address is already allocated. | |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | The DetectMultiplier parameter is not within the valid range. | |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | The specified address is already allocated. | |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | The specified AssociatedPhysicalConnections parameter is invalid. | |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | The specified IpAddress is invalid. | |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | The specified MinTxInterval is not within the valid range. | |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | The specified MinRxInterval is not within the valid range. | |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | The specified NAT gateway does not exist. | |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | The uid, bid, regionNo, remoteRegionNo, and routerId parameters cannot be empty. | |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | This operation cannot be performed when the router interface has an overdue payment. | |
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | The router interface cannot be deleted because routes pointing to it still exist. | |
| 400 | AvailableZoneNotExist | Available zone not exist. | The zone does not exist. | |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | Duplicate values exist in the parameters. | |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | The description must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | The specified bindable instance already has bandwidth. | |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | The parameter is duplicated. | |
| 400 | ForbiddenAction | The user does not support this action. | You do not have the required permissions. | |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | The bandwidth plan does not have sufficient bandwidth. | |
| 400 | RouteConflict | Route conflict exists in routing table. | A route conflict exists in the route table. | |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | The VirtualPhysicalConnection does not have the required permissions or has an overdue payment. The operation is not allowed. | |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | A route conflict exists in the route table. | |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | The traffic mirror destination does not support the type of the specified traffic mirror source. | |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | The value of the Description parameter is invalid. | |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | You do not have the permissions to create shared Express Connect circuits. Contact your account manager. | |
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | This operation is allowed only when the router interface is in the Active, Idle, or Inactive state. | |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | The specified bandwidth package does not exist. | |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | The specified route table type is not supported. | |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | The specified route table type is not supported. | |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | The number of destination routes exceeds the quota limit. | |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | Failed to modify the VPN connection parameters. Multiple remote networks are configured while the IKEv1 protocol is used. | |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | The VPN is being configured. Try again later. | |
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | The resource that you are operating on has reached the quota limit. Refer to the VPN documentation to increase the quota or use an alternative solution. | |
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | No connection logs are found for the specified VPN connection. | |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | The number of VPN customer gateways exceeds the quota limit. | |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | The number of SSL certificates exceeds the quota limit. | |
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | The number of policy-based routes exceeds the quota limit. | |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | The current state of the VPN connection does not support modification or deletion operations. | |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | Different VPN connections under the same VPN gateway that use the same customer gateway cannot have different IKE configurations. | |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | The next hop that the route points to is invalid. | |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | The parameter is invalid. The certificate of the corresponding SSL-VPN server is not found. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | The zone of the secondary vSwitch is not supported. | |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | Required parameters are missing when you create tunnels for a dual-tunnel VPN connection. | |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | The number of VPN connections exceeds the quota limit. | |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | The account balance is insufficient to purchase the VPN gateway. | |
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | the resource cannot be deleted because the resource has an ipsec server dependency. | |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | You do not have the permissions to bindmultiple pass-through EIPs. | |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | You cannot modify the cross-region connection of the border router. Apply for the required permissions. | |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | Creating a NAT service plan is not supported. | |
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | Only Express Connect circuits in the Canceled, Rejected, Terminated, Allocated, or AllocationFailed state can be deleted. | |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | The specified ISP is not supported. | |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | The specified EIP is no longer in the bandwidth package. | |
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | The specified Internet NAT gateway is associated with an elastic IP address (EIP). Disassociate the EIP from the Internet NAT gateway first. | |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | The NatIpPort parameter is invalid. | |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | The format of the OutIp parameter is invalid. | |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | The NetworkInterfaceId parameter is invalid. | |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | The previous token request is being processed. Try again later. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | The specified VSwitchCidrReservationMask must be at least 2 bits longer than the mask of the vSwitch. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | The specified VSwitchCidrReservationMask must be greater than the mask of the vSwitch plus 1. | |
| 400 | InnerError | Internal system error. | An internal system error occurred. | |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | An order-blocking tag exists. Contact your distributor to resolve this issue. | |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | Failed to query the order. An error occurred when calling the trade application. | |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | The IP address and the NAT service plan do not match. The IP address is not in the specified NAT service plan. | |
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | The policy-based route quota has been exceeded. | |
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | Failed to query the trusteeship relationship of the current user. | |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | The status of the EIP is invalid. | |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | The O&M contact information for the ISP line is invalid. | |
| 400 | InvalidParam | The routerEntry input param is illegal. | The input parameters for modifying the route are invalid. | |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | EnableIpv6 cannot be set to False when Ipv6CidrBlock is specified. | |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | The CloudBox public network is not supported in this region. | |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | The status of the NAT gateway is invalid. | |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | The region of the resource does not match the region of the called service. | |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | The next hop supports only common elastic network interfaces (ENIs). | |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | The filter parameter Key is invalid. | |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | The filter parameters do not support specifying only ResourceId or ResourceName without specifying ResourceType. | |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | The number of values for a single Key in the filter parameters cannot exceed 5. | |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | The number of keys in the filter parameters cannot exceed 5. | |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | The filter parameter Value is invalid. | |
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | The specified RouterInterface instance does not exist. | |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | Only fault simulation tasks in the Running state can be stopped. | |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | Only fault simulation tasks in the Pending or Completed state can be deleted. | |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | The specified fault simulation task ID is invalid. | |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | Only fault simulation tasks in the Pending state can be modified or started. | |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | The specified shared Express Connect circuit is not associated with a Virtual Border Router. | |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | Fault simulation is not supported for shared Express Connect circuits with VLAN 0. | |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | Fault simulation is not supported for Express Connect circuits that contain more than one shared Express Connect circuit. | |
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | Fault simulation is not supported for Express Connect circuits that contain more than one cross-account Virtual Border Router. | |
| 400 | AnotherJobTesting | There is another job which is testing. | Only one fault simulation task can be running at a time for the same user in the same region. | |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | The specified task type is invalid. | |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | The specified task duration is invalid. | |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | The specified resource has an overdue payment. | |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | The specified resource ID parameter is invalid. | |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | The status of the resource corresponding to the specified resource ID is invalid. | |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | A fault simulation task is already running for the current user. Complete the task and try again. | |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | A maximum of 16 resources can be added to a fault drill task. | |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | The specified address is already allocated. | |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | The quota for creating gateway route tables in a single VPC has been reached. | |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | The requested resources are insufficient. To request more resources, submit a ticket. | |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | The specified IPv6 egress-only rule instance does not exist. | |
| 400 | EcFailToGetAp | Fail to get access point details. | The information about the corresponding access point cannot be found. | |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | Zone-redundant Express Connect circuits are temporarily not available for purchase in this region. | |
| 400 | EcNotEnoughResource | Insufficient access point resources. | The resources of the access point are insufficient. | |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | The specified Ipv6Address and Ipv6Gateway are not in the same VPC. | |
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | The number of specified user CIDR block parameters has reached the quota limit. | |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | The router interface on the peer end has been deleted. | |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | The Internet NAT gateway instance is being deleted and cannot be deleted again. Wait until the deletion is complete. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | The route entries associated with the instance are in a transient state. Try again later. | |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | The specified IPv6 gateway instance does not exist. | |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | The prefix list association does not exist. | |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | The specified resource type is not supported as a next hop. | |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | The specified vSwitch is in a transient state. | |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | The specified next hop resource is in a transient state. | |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | You do not have the permission to perform operations on the specified resource. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | A route with the same prefix already exists. The prefix is %s. | |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | The route entry is in a transient state. | |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | The specified route entry does not exist. | |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | The specified LeaseTime parameter is invalid. | |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | The specified Priority is invalid or is the same as that of another traffic mirror session. | |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | The specified GatewayType is invalid. | |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | The specified vSwitch does not exist. Check whether your input is correct. | |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | IPv6 is not enabled for the specified vSwitch. Enable IPv6 before performing this operation. | |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | The specified IP address is not within the CIDR block of the vSwitch. Modify the parameter based on the metric description in the API reference and retry. | |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | The number of IP addresses to allocate exceeds the upper limit. Modify the parameter based on the metric description in the API reference and retry. | |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | The format of the specified IP address is invalid. Modify the parameter based on the metric description in the API reference and retry. | |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | Duplicate IP addresses exist among the specified IP addresses. Modify the parameter based on the metric description in the API reference and retry. | |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | The specified IPv6 instance ID does not exist. Check whether your input is correct. | |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | The specified Ipv4Gateway is in a transient state. Try again later. | |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | The specified gateway route table instance is in a transient state. Try again later. | |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | The specified gateway route table is already associated with a gateway instance of the same type. | |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | The specified gateway route table and gateway instance do not belong to the same VPC. Check whether your input is correct. | |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | The specified gateway route table does not support binding with this gateway instance. | |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | The specified gateway route table instance is not a border gateway route table. Check whether your input is correct. | |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | The specified IPv6 gateway is in a transient state. Try again later. | |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | The specified IPv6 address is invalid. Check whether your input is correct. | |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | The specified NetworkType is invalid. Check whether your input is correct. | |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | The specified IPv6 address does not exist. Check whether your input is correct. | |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | The specified IPv6 instance is in a transient state. Try again later. | |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | The current IPv6 instance is in a detached state and does not support the specified billing type. Refer to the metric description in the API reference, modify the parameter, and retry. | |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | The current IPv6 instance is a single-ISP instance and does not support the specified billing type. Refer to the metric description in the API reference, modify the parameter, and retry. | |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | The specified Bandwidth value is invalid. Refer to the metric description in the API reference, modify the parameter, and retry. | |
| 400 | OperationUnsupported.ULA | %s is unsupported. | The current operation does not support ULA addresses. | |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | The specified IPv6 address and IPv6 gateway are not in the same VPC. Check whether your input is correct. | |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | No IPv6 gateway instance exists in the VPC to which the current IPv6 address belongs. Create an IPv6 gateway before performing this operation. | |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | The current IPv6 instance already has Internet bandwidth enabled. Do not enable it again. | |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | The specified billing type requires Cloud Data Transfer (CDT) to be activated. Activate CDT and try again. | |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | IPv6 Internet bandwidth does not support subscription billing. Refer to the metric description in the API reference, modify the parameter, and retry. | |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | The specified InternetChargeType is invalid. Refer to the metric description in the API reference, modify the parameter, and retry. | |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | The specified ChargeType is invalid. Refer to the metric description in the API reference, modify the parameter, and retry. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | Ipv6InstanceId and Ipv6InternetBandwidthId cannot both be empty. | |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | This operation is not allowed on managed instances. | |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | The specified Ipv6InstanceId does not exist. Check whether your input is correct. | |
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | The number of SNAT entries has reached the quota. | |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | The current region does not support modifying the next hop of a route. | |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | An error occurred while querying CEN routes. | |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | The format of the destination CIDR block parameter is invalid. | |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The current ENI status does not support this operation. Try again later. | |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | The LOA status of the port does not allow completion reporting or circuit O&M. | |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | The next hop instance type of the route to be modified is missing. | |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | The next hop instance ID of the route to be modified is missing. | |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | The next hop type of the route is invalid. | |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | Routes that point to a regular NAT gateway do not support next hop modification. | |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | The current route does not support next hop modification. | |
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | The route table instance does not exist. | |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | The next hop instance ID of the specified ENI type does not exist. | |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | The target next hop of the route to be modified already exists. | |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | Your account balance is less than 0. Top up your account and try again. | |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | A connection already exists between the two vRouters. | |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | The operation failed because of a route conflict with an existing routing entry. | |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | Routes that point to a gateway endpoint cannot be manually deleted. | |
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | A VPN gateway does not support configuring an IPsec server and an IPsec-VPN connection at the same time. | |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | The TunnelId parameter is invalid. | |
| 400 | IllegalParam.Role | The specified Role is invalid. | The Role parameter is invalid. | |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | Your account balance is less than 0. Top up your account and try again. | |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | Failed to synchronize the transaction information of the resource. | |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | Failed to query the subscription information of the instance. | |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | The operation failed because the VPC is not associated with this CEN instance. | |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | The operation failed because the VPC has not reached a stable state in the CEN instance. | |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | Creating a route that points to this type of CEN instance in the route table is not supported. | |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | The operation failed because the specified CEN resource does not exist. | |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | The current operation does not support bonding NICs without a slave. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | The operation is allowed only when the HaVip instance is in the Available or InUse state. | |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | The customer gateway and VPN gateway of an IPsec-VPN connection cannot use the same IP address. | |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | Failed to delete the instance because an EIP is associated with the instance. | |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | The application failed because the IP address belongs to another user. | |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | The application failed because the IP address is locked. | |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | Multiple IPsec-VPN connections are associated with the same VPN gateway and customer gateway. The traffic flows of these IPsec-VPN connections must not overlap. | |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | Multiple IPsec-VPN connections are associated with the same VPN gateway and customer gateway. The pre-shared key and IKE phase configuration parameters of these IPsec-VPN connections must be the same. | |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | The VPN gateway does not support configuring policy-based routes that have the same source CIDR block, destination CIDR block, and weight. | |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | The VPN gateway does not support multiple policy-based routes with the same priority that have overlapping source and destination CIDR blocks. | |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | A dual-tunnel VPN gateway does not support configuring policy-based routes that have the same source CIDR block and destination CIDR block. | |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | A route with the prefix %s in the VPC route table is included in the IPsec server client CIDR block. | |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | The current VPN gateway type does not support enabling high availability. | |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | Enabling high availability supports only IPsec-VPN or SSL-VPN. | |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | The current region does not support enabling high availability. | |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | The zone of the primary vSwitch is not supported. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | The zone of the secondary vSwitch does not support the feature. | |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | The primary and secondary zones must be different. | |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | The number of active IP addresses in the primary vSwitch is insufficient. | |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | A policy-based route with the same prefix already exists. The prefix is %s. | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | The same tunnel CIDR block exists in the BGP configurations of different IPsec tunnels. The tunnel CIDR block is %s. | |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | A route with the prefix %s in the VPC route table is included in the SSL-VPN client CIDR block. | |
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | The secondary vSwitch does not have sufficient available IP addresses. | |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes that point to the HaVip in the same route table exceeds the limit. | |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | The bandwidth value of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | The localized company name is invalid. | |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | The company name is invalid. | |
| 400 | IllegalParam.LineType | Invalid LineType. | The type of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | The geographical location of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | The ID type of the construction engineer is invalid. | |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | The ID number of the construction engineer is invalid. | |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | The contact information of the construction engineer is invalid. | |
| 400 | IllegalParam.PmGender | Invalid PmGender. | The gender of the construction engineer is invalid. | |
| 400 | IllegalParam.PmName | Invalid PmName. | The name of the construction engineer is invalid. | |
| 400 | IllegalParam.Si | Invalid Si. | The construction unit of the Express Connect circuit is invalid. | |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | The Express Connect circuit instance ID does not exist. | |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | The Express Connect circuit [%] is in an abnormal state. | |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | The construction status of the Express Connect circuit is abnormal. | |
| 400 | ResourceType.Unknown | Unknown ResourceType. | The resource type does not exist. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | A route with the same prefix already exists. The prefix is %s. | |
| 400 | IllegalParam.Bandwidth | [%s] | The bandwidth value [%s] of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | The localized company name [%s] is invalid. | |
| 400 | IllegalParam.CompanyName | [%s] | The company name [%s] is invalid. | |
| 400 | IllegalParam.LineType | [%s] | The Express Connect circuit type [%s] is invalid. | |
| 400 | IllegalParam.PeerLocation | [%s] | The geographic location [%s] of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.PmCertificateType | [%s] | The ID document type [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmCertificateNo | [%s] | The ID document number [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmContactInfo | [%s] | The contact information [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmGender | [%s] | The gender [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.PmName | [%s] | The name [%s] of the construction engineer is invalid. | |
| 400 | IllegalParam.Si | [%s] | The construction unit [%s] of the Express Connect circuit is invalid. | |
| 400 | InvalidInstanceId.NotFound | [%s] | The Express Connect circuit instance [%s] does not exist. | |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | The instance status is incorrect. | |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | The construction status [%s] of the Express Connect circuit is abnormal. | |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | Construction is not allowed for shared Express Connect circuits. | |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | The status of the shared Express Connect circuit [%s] is incorrect. | |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The Alibaba Cloud user ID of the resource owner is invalid. | |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | The bandwidth of the Virtual Border Router exceeds the threshold of the Express Connect circuit. | |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | The operation failed because the instance has been locked for O&M. | |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | The Express Connect circuit instance ID is required. | |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | The planned construction time is required. | |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | The construction engineer information is required. | |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | The router interface is not a virtual network interface used for connections. | |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | The router interface has been locked due to an overdue payment. | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | The parameters OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be specified. | |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId is incorrect. | |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId is incorrect. | |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | The router owner information is incorrect. | |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | The VPC is not in a stable state. | |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | The zone of the CloudBox Internet Shared Bandwidth does not match the active zone of the EIP. | |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | The next hop type does not match the next hop instance. | |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | The specified IPv6 CIDR block is unavailable. | |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | You cannot create an IPv4 gateway because a VPN gateway already exists in the VPC. | |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | The operation is not allowed. Failed to retrieve the NFV service list. | |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | The current instance status is not stable. | |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | The AliUid is not allowed to directly enable the physical port. | |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | The access device is not allowed to directly enable the physical port. | |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | The specified zone does not support instance creation in the current region. | |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | An EIP is being added to the Internet Shared Bandwidth instance. You cannot delete the instance. | |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | The specified cloud service type is invalid. | |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | Failed to query the account information when placing the order. | |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | The specified private IP address does not match the vSwitch. | |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | The LocalGatewayIpAndMask parameter is invalid. | |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | Your current quota is insufficient. Contact your channel partner to increase the quota. | |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | The maximum number of flow log instances has been reached. | |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | The RouterInterface can be operated only when its status is Active, Idle, or Inactive. | |
| 400 | ResourceQueryError | The specified resource is queried error. | An error occurred while querying the specified resource. | |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | The network ACL has associated resources. | |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | The operation failed because the default NAT IP CIDR block cannot be deleted. | |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s and %s do not match. | |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | The specified %s resource does not exist. | |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | The BgpPeer is in an invalid state and cannot run. | |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | The operation failed because the default NAT IP address cannot be deleted. | |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. | |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | The InternalPort parameter is duplicate or already in use. | |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | The system route table cannot be disassociated. | |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | The vSwitch cannot be deleted because a network ACL is associated with it. | |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | The specified instance does not exist in the current VPC. | |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | The operation failed because the EIP instance status is invalid. | |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | The specified network ACL is being modified. | |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | A duplicate route entry already exists. | |
| 400 | IpConflict | Client IP pool conflict with local IP range. | The client IP pool conflicts with the local IP range. | |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | The client IP pool conflicts with another SSL VPN server in the same VPC. | |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | An SSL VPN server already exists for the specified VPN gateway. | |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | Only custom route tables can be deleted by this operation. | |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | The vSwitch cannot be deleted because a NAT gateway exists. | |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | The associated instance is in an intermediate state. | |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | The IP address is in an incorrect state. | |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | The vSwitch cannot be deleted because it is in use by an SNAT entry. | |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | The specified %s resource does not exist. | |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | The status of %s [%s] is incorrect. | |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | The specified IP address cannot be found. | |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | No resources are available in the region. | |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | The specified object has a dependent network ACL resource. | |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | The VPC route table quota has been exceeded. | |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | Failed to query the price when creating the order. | |
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | The Virtual Border Router (VBR) and the Express Connect circuit are not on the same access device. | |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | The DNAT public port %s is already in use. | |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | The NatIpCidr CIDR block is not within the user-defined CIDR block range. | |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | Failed to verify the sale conditions by using the sub-item. | |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | The operation failed. A conflict exists with other entries because any port or any protocol type is specified. | |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | Failed to call the internal service. Try again later. | |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | The IP version in the parameter is invalid. | |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | The peer IP address parameter is missing. | |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | The peer IP address is invalid. | |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | The ResourceType parameter is missing. | |
| 400 | Ip.Allocated | The reserve ip has been allocated. | The reserved IP address has already been assigned. | |
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | The operation conflicts. You cannot modify Ipv6Cidr and disable the IPv6 feature at the same time. | |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | The current EIP does not belong to the NAT service plan. | |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | The operation failed. The specified IPv6 CIDR block is not reserved. | |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | You cannot directly switch a bound route table to a system route table. | |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | The operation failed. The specified IPv4 gateway and route table do not belong to the same VPC. | |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | The operation failed. The CIDR block is in use. | |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | The DHCP options set in this region does not support custom LeaseTime. | |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | The number of traffic mirror sources associated with the traffic mirror destination has exceeded the quota. | |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | The specified resource is not in the specified resource group. | |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | The router interface is locked due to an overdue payment and cannot be operated. | |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | The router interface is a user-side interface and cannot be activated. | |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | An IPv6 egress-only rule already exists for this IPv6 instance. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | This operation can only be performed on a RouterInterface when its status is Inactive. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | This operation can only be performed when the router interface is in the Idle state. | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be specified. | |
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, or OppositeInterfaceOwnerId is incorrect. The RouterInterface or Router may not exist, the parameters may not match, or the RouterInterface is not the connection accepter. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | This operation can only be performed when the router interface is in the Active state. | |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | The router does not belong to your account. | |
| 400 | MissingParam.Zones | The Zones parameter is required. | The Zones parameter is required. | |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | The Zones parameter is invalid. | |
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | You cannot delete a contiguous EIP group because EIPs in the group have been added to an Internet Shared Bandwidth instance. | |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | The size of the Zones array is invalid. | |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | The Zone and PublicIpAddressPoolId parameters cannot be specified at the same time. | |
| 400 | IllegalParam.Zone | The specified zone is invalid. | The Zone parameter is invalid. | |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | The active zone of the Internet Shared Bandwidth and the EIP of the CloudBox do not match. | |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | The flow log delivery address is invalid. The flow log cannot be activated. | |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | The next hop instance of the route is in an O&M lock state and cannot be operated. | |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | The VPC has a peer RouterInterface that has not been deleted. Failed to delete a VPC. | |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | The number of port ranges has exceeded the quota. | |
| 400 | InvalidAccount.NotFound | The account is invalid. | The operation failed because an invalid calling account was used. | |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | The NAT CIDR block overlaps with the VPC CIDR block. The operation failed. | |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | The specified private IP address does not exist. | |
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | Failed to query the information of the secondary elastic network interfaces (ENIs). The network interface controller (NIC) information could not be retrieved. | |
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | The associated instance does not belong to your account. | |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | The attribute of using IPAM to create a VPC is not supported. | |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | The current state of the resource does not support this operation. | |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | The specified device does not exist. | |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | The specified PhysicalConnectionId is not in the Allocated state. | |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | The specified high-availability virtual IP address and the route table do not belong to the same VPC. | |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | The specified traffic mirroring target instance does not exist. | |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | The current region does not support the IPv6 feature. | |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | The specified Ipv6Isp feature is not supported. | |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | The specified IPAM pool type is invalid. | |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | The specified Ipv6CidrBlock is invalid. | |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | The specified IPv6 CIDR block resources are insufficient. | |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | A vSwitch cannot be associated with a gateway route table. | |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | The specified IPv4 gateway instance does not exist. | |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | The routing CIDR block has a route conflict with an existing prefix list route. | |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | The operation failed because this prefix list route already exists. | |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | The port number of the SSL VPN server must be in the range of [1-65535]. | |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | |
| 400 | IllegalParam.ResourceType | Invalid %s value. | The specified ResourceType parameter is invalid. | |
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | The vRouter description is invalid. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | The specified VSwitchCidrReservationMask must be greater than the mask of the vSwitch + 2. | |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | The specified reserved CIDR block cannot contain IP addresses that are already in use. | |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | Only the next hop attribute of a local route can be modified. | |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | The policy information format is invalid. | |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | Creating a route with this next hop type is not allowed. | |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | The requested resources are insufficient. To request more resources, submit a ticket. | |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | An EIP is associated with a private IP address for Internet access. This feature depends on the IPv4 gateway. The IPv4 gateway cannot be deleted. | |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | The Description request parameter is invalid. Enter a valid value based on the request parameter requirements. | |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | The specified service is locked due to overdue payment. | |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | You cannot create a PublicIpAddressPool. Check whether your account is authorized to perform this operation. | |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | The number of PublicIpAddressPools has reached the quota. Increase the quota and try again. | |
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | The error message returned because the specified route does not exist. | |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | The specified route entry is being configured. | |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | You are not authorized to perform operations on this resource. | |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | Modifying the bandwidth specification of a vRouter created on a shared port is not supported. | |
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | The current service status does not support creating a flow log instance. | |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested flowLog service. Make sure that you have subscribed to the service that you are trying to use. | |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | The specified ReservedCidrMask is invalid. Enter a valid value based on the request parameter requirements. | |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | The number of CidrReservation resources that you created has reached the upper limit. | |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | The specified VSwitchCidrReservation does not exist. Check whether the VSwitchCidrReservation is available. | |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | The feature of binding an EIP to an IpAddress is not supported. | |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | The current vSwitch is being used by a cloud service and cannot be deleted. Confirm the cloud service usage scenarios. | |
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | The fee is invalid. | |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | The current VPN connection is not associated with any certificate. | |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | The current region does not support enabling BGP. | |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | The Isp parameter is invalid. Enter a valid value based on the request parameter requirements. | |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | The Name parameter is invalid. Enter a valid value based on the request parameter requirements. | |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | The instance has a financial lock due to overdue payment. Operations cannot be performed. | |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | The EIP instance is locked. | |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | The specified vSwitch does not exist. Check whether the vSwitch is available. | |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | IPv6 is not enabled for the specified vSwitch. | |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | The specified reserved CIDR block does not meet the reservation conditions. | |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | Either ReservedCidr or ReservedCidrMask must be specified. | |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | The ReservedCidrMask parameter is invalid. Enter a valid value based on the request parameter requirements. | |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. Enter a valid value based on the request parameter requirements. | |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | The VPC to which the specified vSwitch belongs does not support advanced features. Use a different vSwitch and try again. | |
| 400 | UnsupportedRegion | UnsupportedRegion | The current region does not support this feature. | |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | The ENI instance does not exist. | |
| 400 | InvalidInstanceId | VPC does not exists. | The VPC-connected instance does not exist. | |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | The Simple Log Service source project or Logstore does not exist. | |
| 400 | OperationUnsupported.action | This action is not support. | This operation is not supported. | |
| 400 | InvalidInstanceId | Instance does not exist. | The instance does not exist. | |
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | The specified project or Logstore does not exist. | |
| 400 | ParameterInvalid | Invalid parameter. | The input parameter is invalid. | |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | The input parameter Description is invalid. | |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | The IPv6 address is invalid. | |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | The IPv6 instance ID is invalid. | |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | The NetworkType parameter is invalid. | |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName is invalid. | |
| 400 | MissingParam | MissingParameter %s | A required parameter is missing. | |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | This request is not allowed to operate on the specified tag key. | |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | The system tag is invalid. | |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | The system is busy. Try again later. | |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | The current region is not supported. | |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | The specified Internet Shared Bandwidth instance does not exist. | |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | Querying Internet Shared Bandwidth instances that are connected to Cloud Data Transfer is not supported. | |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | The commodity code is invalid. Modify the code and try again. | |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | The instance is not attached to a Cloud Enterprise Network (CEN) instance. This operation is not allowed. | |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | Outbound traffic billing is not enabled. This operation is not allowed. | |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | The number of prefixes exceeds the quota. | |
| 400 | ResourceInConfiguring | The resource is being configured. | The resource is being upgraded or downgraded. | |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | The specified VSwitchCidrReservation instance does not exist. | |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | The interconnection IP address is duplicated. Change the IP address and try again. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | The specified NetworkInterface %s does not exist. | |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | This operation does not support classic load balancing instances. | |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | The VPN gateway is not associated with any certificate. | |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | The peer ID is required when you create a ShangMi (SM) VPN connection. | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | The specified customer gateway has VPN connections that have not been deleted. | |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | The specified VPN gateway has SSL servers that have not been deleted. | |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | The specified VPN gateway has GRE tunnels that have not been deleted. | |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | The specified route entry does not exist. | |
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | The resource already has an IP prefix assigned. Delete the IP prefix and try again. | |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | The peer IP address is duplicated. | |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | The local IP address is duplicated. | |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | The local IP address is duplicated. | |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | The interconnection IP address is duplicated. Change the IP address and try again. | |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | The peer IP address is duplicated. | |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | Creating ECMP routes by using a prefix list is not supported. | |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | The current operation conflicts with the IP prefix of the elastic network interfaces (ENIs). Check the network interface controller (NIC) configuration and try again. | |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | This operation is not supported for the EIP bindng type of this NAT gateway. | |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | This operation is not allowed because the user is not in the whitelist. | |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | Bindng an EIP to a prefix IP address is not supported in the current region. | |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | The format of the VSwitchCidrReservationCidr parameter is invalid. | |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | The specified vSwitch instance does not exist. | |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | The specified ReservedType is not supported. | |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | IPv6 is not enabled for the specified vSwitch. | |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | The specified VSwitchCidrReservationCidr conflicts with an existing VSwitchCidrReservation CIDR block. | |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | VSwitchCidrReservationMask and VSwitchCidrReservationCidr cannot both be empty. Specify one of them and try again. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | The VSwitchCidrReservationMask parameter is invalid. Modify the value based on the parameter description in the API reference and retry. | |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | The VSwitchCidrReservationMask exceeds the quota. Modify the value based on the parameter description in the API reference and retry. | |
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | The number of VSwitchCidrReservation instances exceeds the quota. | |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | The specified VSwitchCidrReservationMask conflicts with VSwitchCidrReservationCidr. Modify the parameters based on the metric description in the API reference and retry. | |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | The specified vSwitch does not have sufficient CIDR blocks to allocate a CIDR reservation. | |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The network interface controller (NIC) status is incorrect. | |
| 400 | RuleExist | The rule already exists. | The rule already exists. | |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | The specified Ipv6AddressId and Ipv6InternetBandwidthId do not belong to the same instance. | |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | The specified Ipv6AddressId or Ipv6InternetBandwidthId does not exist. | |
| 400 | MissingParam.Tags | The Tags parameter is required. | The Tags parameter is required. | |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | The Ipv6InstanceId is not specified. | |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | The specified Ipv6Instance resource was not found. | |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | The operation is prohibited due to a financial lock. | |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | The operation is prohibited because the specified bandwidth instance does not exist. | |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | The operation is prohibited because the specified bandwidth exceeds the upper limit. | |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | The operation is prohibited because the bandwidth instance is in a transient state. | |
| 400 | OperationFailed.RiskControl | Risk control check failed. | A security risk was detected with your payment method. Continue verification through the link in the email or console message, and resubmit the order after verification. | |
| 400 | Price.SystemError | Price inquiry failed. | Price inquiry failed. Try again later. | |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | The account does not have a payment method configured or the prepayment balance is insufficient. | |
| 400 | OrderError | Failed to create the order. | Failed to create the order. Try again later. | |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | The specified gateway endpoint does not exist. | |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | The MaxResults parameter is invalid. | |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | The specified resource ID does not exist. | |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | Your personal information is incomplete. Complete sign-up and try again. | |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | A default vSwitch already exists in the current zone. | |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | The operation failed because a default VPC already exists. | |
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | Failed to create the order due to a concurrent operation. | |
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | Real-name verification has not been completed. Go to the Account Center to complete real-name verification. | |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | The shared port is in a terminated state. The VLAN cannot be modified. | |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | The shared port is in a financial lock state. The VLAN cannot be modified. | |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | The specified network ACL is not associated with the vSwitch. | |
| 400 | InvalidInstanceId | vswitch does not exist. | The vSwitch instance does not exist. | |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | Failed to associate the EIP with the ECS instance because the ECS instance does not exist or is not a VPC-connected instance. | |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | The available balance of the account is insufficient. | |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | The Tags parameter is missing. | |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | The specified ResourceType is not supported or is invalid. | |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | The specified resource group is invalid or does not exist. | |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | The gateway and the route table are not in the same VPC. Association is not allowed. | |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | The vpc_flowlog_public product does not have the required tag for internal users. Internal users are not allowed to purchase this product. | |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | The peer of this router interface is a VPC. Creating an IPv6 route with this next hop type is not supported in this region. | |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | The operation is rejected because IPv6 is not enabled for the VPC. | |
| 400 | Unauthorized | This api does not support sub user or role. | This API operation does not support RAM users or roles. | |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | The NAT gateway does not have private connectivity enabled. | |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | The local IP address parameter is duplicated. Change the local IP address and try again. | |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | The peer IP address parameter is duplicated. Change the peer IP address and try again. | |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | The local IP address parameter is duplicated. Change the local IP address and try again. | |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | The local gateway IP address and subnet mask are invalid. Correct them and try again. | |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | The subnet mask is invalid. Correct it and try again. | |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | The shared port still exists. The physical port cannot be terminated. | |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | The deletion failed. The user of the shared port must perform the deletion. | |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | The deletion failed. The user of the physical port must perform the deletion. | |
| 400 | Forbidden.VBRExists | The vbr still exists. | The Virtual Border Router (VBR) still exists. The port cannot be deleted. | |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | The gateway route table does not support creating route entries that point to this instance type. | |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | The number of route entries that each BGP peer in the BGP group can receive exceeds the quota. | |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | Your basic information is incomplete. Complete the information first. | |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | Your current quota is insufficient. Contact your channel partner to increase the quota. | |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | An EIP cannot be associated with an ENI in both NAT mode and multi-EIP to ENI mode at the same time. | |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | The bindng operation failed because the ECS instance is being migrated. | |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | Failed to associate the EIP with the IP address because the IPv4 gateway is not enabled for the VPC. | |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | The IPv4 gateway is in a transient state. | |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | The port type and bandwidth value cannot both be empty. | |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | The current instance status does not support this operation. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | The system failed to add the CIDR block to the address pool because the CIDR block or the subnet mask is not specified. | |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | Failed to add a CIDR block to the address pool because the CIDR block and address mask cannot be specified at the same time. | |
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | You do not have the permission to operate on the HaVip. Apply for the permission in Quota Center. | |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The vSwitch cannot be deleted because it has a VSwitchCidrReservation in use. | |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | The specified TagKey parameter is duplicated. | |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | The specified TagValue parameter is invalid. | |
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | The specified TagKey parameter is invalid. | |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | The specified ASN is invalid. | |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You do not have the permission to operate on this resource. Apply for the permission and try again. | |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | The NAT gateway does not have a full NAT table. | |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | The specified full NAT entry was not found. | |
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | When BGP is enabled on the VPN gateway, BGP must also be enabled on the VPN connection. | |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | |
| 400 | Invalid.Grant | Can not grant to other owner cen. | Cross-account authorization of the VBR to another CEN is not allowed. | |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | The specified route entry type is invalid. | |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | The specified region was not found during access authentication. | |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | The parameter is duplicated. | |
| 400 | MissingParam.%s | The param of %s is missing. | A required parameter is missing. | |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | The IPsec-VPN feature is not enabled on the VPN gateway. | |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | The specified VPN connection name is invalid. | |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | The Vpconn type is not supported. | |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | The specified route table type does not allow you to create route entries. | |
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | The quota has been exceeded. | |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | The VLAN ID is already in use. | |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | The Virtual Border Router (VBR) has BGP advertised CIDR block configurations and cannot be deleted. | |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | The operation is too frequent. Try again later. | |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | The current VPN version does not support setting the priority of policy-based route entries. | |
| 400 | InvalidParams.NotNull | params must not null. | The parameter cannot be empty. | |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | The specified BgpGroup LocalAsn is invalid. Only values from 64512 to 65534 or from 420000000 to 429496729 are supported. | |
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | The PeerIpAddress must be specified. | |
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | The peer IP address is already in use. The BGP peer cannot be created. | |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | The PeerAsn parameter is invalid. | |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | The LocalAsn parameter is invalid. | |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | The operation is not supported. | |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | The Price parameter is invalid. | |
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | The InstanceChargeType parameter is invalid. | |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | The instance status does not allow this operation. | |
| 400 | InvalidAliuid | Invalid Aliuid. | The Aliuid is invalid. | |
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | The bandwidth plan is insufficient. | |
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | The parameter cannot be null. | |
| 400 | INVAID.VBR.STATUS | VBR status must be active | The VBR status is invalid. | |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | Check the CEN status. | |
| 400 | ForbiddenAction | The user does not supported this action. | The user permission is not supported. | |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | The subscription billing type is not supported. | |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | The specified RouterInterface Spec is invalid. | |
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | The VPC subnet does not exist. | |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | The health check IP address cannot be the same as the instance IP address. | |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | The health check IP address is invalid. | |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | The operation failed. | |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | The cross-region bandwidth plan is invalid. | |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | The VRouterType is invalid. | |
| 400 | IllegalParam.Spec | The spec is illegal. | The spec is invalid. | |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | The user does not have the permission to create a cross-border router interface. | |
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | The RouterId parameter is invalid. | |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | The commodity does not exist. | |
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | The specified RouterInterface ChargeType is invalid. | |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | The regionId is invalid. | |
| 400 | QuotaExceeded | RiPerUser quota exceeded | The number of VPC peering connection router interfaces created by the current user has reached the upper limit. | |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | The parameter is invalid. | |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | The router interface cannot be attached to a Cloud Enterprise Network (CEN) instance. | |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | The specified CidrReservation does not exist. Check whether the CidrReservation is available. | |
| 400 | IllegalParamFormat | The param of %s is illegal. | The specified parameter is invalid. | |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The VbrOwnerId parameter is invalid. | |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | The VbrOwnerId is a Resource Access Management (RAM) users account or partner account, which is not allowed as the VBR owner account. | |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | Shared Express Connect circuits do not allow creating a Virtual Border Router (VBR) for another account. | |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | The VBR bandwidth value does not match the bandwidth value of the associated shared Express Connect circuits. | |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | The Bandwidth parameter is invalid. | |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | A VBR has already been created for the shared Express Connect circuits. No more VBRs can be created. | |
| 400 | IllegalParamFormat | IllegalParamFormat | The parameter format is invalid. | |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | The CIDR block format is invalid. | |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | You do not have the permission to create shared Express Connect circuits. Contact your account manager. | |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | The UID of the shared port cannot be a Resource Access Management (RAM) users account or partner account. | |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | The quota for shared ports created on a single physical port has been exceeded. | |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | The ExpectSpec parameter is invalid. | |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | Only the physical port to which the shared port belongs can be modified. | |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | Only the account of the physical port to which the shared port belongs can modify these parameters. | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | The VBR is already referenced. | |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | The VBR cannot be deleted because a Network Quality Analyzer (NQA) configuration exists. | |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | The IpAddress parameter is invalid. | |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | The CidrBlock parameter is invalid. | |
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | The parameters LocalGatewayIp, peerGatewayIp, and peeringSubnetMask are required and cannot be empty. | |
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | The VLAN ID is already in use. | |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | The VBR quota has been exceeded. | |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | The device quota has been exceeded. | |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | The region does not support IPv6. | |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | The bandwidth has exceeded the limit. | |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | The access device is disabled. The VBR cannot be created. | |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. | |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | The address pool instance is not in a stable state. EIP allocation is not allowed. | |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | The BGP neighbor IP address is duplicated. | |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | The EIP cannot be allocated because the IP address pool is not in a valid state. | |
| 400 | IllegalParam.Isp | The param of %s is illegal. | The EIP cannot be allocated because the ISP parameter is invalid. | |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | The EIP bindng operation failed because an IPv4 gateway exists in this VPC. | |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | A private VPN gateway does not support enabling the SSL feature. | |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | The network type is invalid. | |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | The quota for many-to-one DNAT sessions has been exceeded. | |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | A conflict exists between the current customer gateway and the route. | |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | A VPN operation conflict exists. Try again later. | |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | The FullnatTableId and natGatewayId parameters cannot both be empty. | |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | The specified public IP address pool instance does not exist. | |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | The public IP address pool has been shared with other users and cannot be deleted. | |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | The public IP address pool instance is a shared resource and cannot be modified. | |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | The peer does not exist. | |
| 400 | InvalidInstance.StatusError | The router instance status error. | The instance status is in fault. | |
| 400 | Forbidden | The eip instance owner error | The EIP does not belong to the current caller. Check whether you have permission to call this EIP. | |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | Failed to create the order because the token is invalid. | |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | Authorization failed when operating on the managed flow log. | |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | The peerIpAddress parameter is invalid. | |
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | You do not have permission to operate on the specified PhysicalConnectionId. | |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | The modified bandwidth parameter cannot be saved. | |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | Multiple physical connection bandwidth is not supported. | |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | The Virtual Border Router bandwidth quota has been exceeded. | |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | The Bandwidth parameter is missing. | |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | The Bandwidth parameter is invalid. | |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | The InstanceId parameter is missing. | |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | The InstanceId parameter is invalid. | |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | The Vpconn cannot be operated on. | |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | You cannot skip a construction step to proceed to the next step. | |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | The PhysicalConnection is in an invalid state. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | The PhysicalConnectionId parameter is invalid. | |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | The PhysicalConnectionId parameter is missing. | |
| 400 | MissingParam.AliUid | AliUid is missing. | The AliUid parameter is missing. | |
| 400 | MissingParam.RegionNo | RegionNo is missing. | The RegionNo parameter is missing. | |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | A Fullnat configuration entry depends on this NAT IP address. The operation cannot be completed. | |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | An EIP that is being associated cannot be used to create an SNAT entry. | |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | The NAT gateway is in an invalid state. | |
| 400 | Forbidden | The eip instance owener error | The EIP does not belong to the current caller. Check whether you have permission to call this EIP. | |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | A request conflict occurred. Try again later. | |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | The specified IPsec PFS is not supported. | |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | At least one authentication method (PSK or IDaaS) must be specified. | |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | The IDaaS instance ID is required when two-factor authentication is enabled. | |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | The VPN service does not have permission to operate on your IDaaS instance. | |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | The network mask length of the client IP pool must be greater than or equal to 16 and less than or equal to 29. | |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | The specified client IP pool conflicts with a VPN connection or SSL server. | |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | Failed to add a VPC route after this operation. | |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | The specified IDaaS instance ID does not exist. | |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | Operations on this instance are too frequent. Try again later. | |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | The specified VPN instance was not found. | |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | The route weight value is invalid. | |
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | The next hop specified for the route does not exist. | |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | The specified local BGP IP address is invalid. | |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | The specified tunnel CIDR block is invalid. | |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | The tunnel CIDR block parameter is required when BGP is enabled. | |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | The number of policy-based routes has reached the upper limit. | |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | The specified Pfs parameter in the IPsec-VPN connection is not supported. | |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | The specified authentication algorithm in the IPsec-VPN connection is not supported. | |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | The current VPN version does not support enabling BGP. | |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | The parameter is invalid. When the DNAT forwarding protocol is set to Any, the source port and destination port must be 0. | |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | The specified virtual switch was not found during access authentication. | |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | The operation is too frequent. Try again later. | |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | The specified route entry was not found. | |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | |
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | The purchase quantity exceeds the maximum limit. | |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | The PmCertificateNo parameter is invalid. | |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | The instance status is invalid. | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | The Virtual Border Router (VBR) cannot be deleted because it is associated with a BgpGroup. | |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | The quota has been exceeded. | |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | The status parameter is invalid. | |
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | The specified IP address is invalid. | |
| 400 | IncorrectStatus.null | RouterInterface status is null. | The RI status is empty. | |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | The user does not have the required permissions. | |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | Failed to create the IPv4 gateway because the IPv4 gateway feature is not supported. | |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | Failed to create the route entry because the number of VPN route entries has exceeded the limit. | |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | Failed to create the route entry because equal-cost multi-path (ECMP) routing supports only one non-RI type as the next hop. | |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | Failed to modify the gateway route entry. The next hop must first be changed to a local route before you can customize the next hop. | |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | No resources are available in the current zone. | |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | The operation failed. Only custom route entries support filtering by route entry ID or route entry name. | |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | The operation is not supported. Resource group IDs are not supported in Alibaba Finance Cloud. | |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | The number of VPC IDs has exceeded the limit. | |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | The specified signature nonce has already been used. | |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | The specified access key was not found. | |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | Failed to disassociate the route table from the gateway because no association exists. | |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | The specified gateway route table was not found. | |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | The modification failed because the specified route entry name is invalid. | |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | Failed to modify the route table attributes because the table name format is invalid. | |
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | The specified network ACL was not found. | |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | The operation failed because the IPv6 gateway is still in use. | |
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | The secondary CIDR block to be deleted cannot be found. | |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | The name length of the rule entry is invalid. | |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | The number of network ACL rules entries exceeds the limit. | |
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | The name of the rule entry is invalid. | |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | The number of port range mappings for a single DNAT IP address exceeds the limit. | |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | The TunnelCidr parameter is invalid. | |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | The current transit router does not support this operation. Upgrade the transit router and try again. | |
| 400 | IllegalParam.%s | The param of %s is illegal. | The specified parameter is invalid. | |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | You do not have the permission to manage the current resource. Apply for the required permission and try again. | |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | A required parameter is missing. Ipv6CidrBlock is a required parameter. | |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current status of the Cloud Enterprise Network (CEN) instance does not support the operation to create a vSwitch. | |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | A required parameter is missing. vpcId is a required parameter. | |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | The flow log status is invalid and the flow log cannot be stopped. | |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | The status of the specified instance is invalid. | |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | A flow log instance already exists for the specified resource. | |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | The specified IP address is already used by another resource. | |
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | The specified IP address is not within the CIDR block of the vSwitch. | |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | IPv4 gateways are not supported in this region. | |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | An IPv4 gateway cannot be created because a pass-through EIP exists. | |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | The mode parameter is invalid. | |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | The operation failed because the VPC cannot be found. | |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | The specified VPC peering connection cannot be found. | |
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | A pass-through ENI cannot be used as the next hop. | |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | The mask of the CIDR block is invalid. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | The number of IP addresses in the pool has reached the upper limit. | |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | The CIDR block is invalid. | |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | The instance to be associated is already in the associated state. | |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | The specified route table is not in a valid state. | |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | The operation is not allowed because the route table type is incorrect. | |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | The operation is not allowed because the specified IPv4 gateway is not activated. | |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | The specified IPv4 gateway is already associated. | |
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | Specify the IDaaSInstanceId parameter when you enable two-factor authentication. | |
| 404 | InstanceNotExists | Instance not exists. | The instance to be deleted does not exist. | |
| 400 | Throttling.User | Request was denied due to user flow control. | The request was rejected due to client-side throttling. | |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | The instance status of the DNAT entry instance to be deleted is invalid. | |
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | The parameters do not match. Check the parameters. | |
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | The EIP disassociation failed because the SNAT or DNAT entry is in an unstable state. | |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | The CIDR block you added does not exist. | |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | The number of port range mappings for a single DNAT IP address must be less than 64. | |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | The operation is not allowed because the next hop has not changed. | |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | A dependent rate-limiting rule with protection exists. | |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | The VPC cannot be deleted because an IPv4 gateway exists in the VPC. | |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | The Internet Shared Bandwidth instance cannot be deleted because it still contains EIPs. | |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | The resource deletion protection does not exist. | |
| 400 | DeletionProtection.OwnerError | The resource owner error. | You are not the owner of this resource and cannot perform this operation. | |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | The resource deletion protection is already enabled. | |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | This resource type is not supported. | |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | Subscription resources are not supported. | |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | The resource does not exist. | |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | The operation is too frequent. A task conflict occurred. | |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | The route configuration conflicts with the IPsec server. | |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | The route entry conflicts with the SSL client. | |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | The IPv4 gateway cannot be deleted because routes to the IPv4 gateway exist. | |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | The specified IPv4 gateway was not found and cannot be deleted. | |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | The operation is not allowed because the specified IPv4 gateway is in the bindable state. | |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | The specified route table cannot be deleted because it still contains custom route entries. | |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | The specified route table cannot be deleted because it is associated with a gateway. | |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | The current status of the route table does not support the delete operation. | |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | The DHCP options set instance status in the current VPC does not support the operation to delete a VPC. | |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current Cloud Enterprise Network (CEN) status does not support the operation to delete the virtual switch (vSwitch). | |
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | The specified virtual switch (vSwitch) instance was not found during the permission verification procedure. | |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | The current virtual switch (vSwitch) cannot be deleted because other subnets are being operated on. | |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | An IPv4 gateway cannot be created because the VPC already has an IPv4 gateway. | |
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | The operation is not supported because the instance is in the suspended state. | |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | The quota is insufficient. Contact your channel partner to increase the quota. | |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | The specified load balancing ID does not exist. | |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | The specified key is not empty and cannot be cleared. | |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | The VLAN ID is already in use. | |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | The specified port type does not exist. | |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | The bandwidth value associated with the Express Connect circuit is invalid. | |
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | The operation on the Express Connect circuit is invalid. | |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | The port type of the Express Connect circuit is invalid. | |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | The ClientToken parameter is invalid. | |
| 400 | InvalidPortType.NotFound | Specified port type is not found. | The port of the specified specification is out of stock. | |
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | The Status parameter is invalid. | |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | The AliUid parameter of Vpconn is invalid. | |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | The value of the Description parameter is invalid. | |
| 400 | InvalidName.Malformed | The specified Name is not valid. | The Name parameter value is invalid. | |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | The VLAN ID is invalid. | |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | The Spec parameter is invalid. | |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | Failed to create the VPconn. | |
| 400 | MissingParam.Spec | The param of Spec is missing. | The Spec parameter is missing. | |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | The operation does not support accessing the AccessDevice. | |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | The specified Virtual Border Router (VBR) is already bindded. | |
| 400 | MissingParam.VbrId | You must specify VbrId. | The vbrId parameter is missing. | |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | Dependent BGP peers exist. | |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | The health check IP address is invalid. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | You can perform this operation on a high-availability virtual IP address (HaVip) only when the HaVip is in the Available or InUse state. | |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | Failed to add a route to the client CIDR block. Check the VPC route entries and related quotas. | |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | The current client CIDR block is unavailable. | |
| 400 | OperationFailed.AssociationExist | The association already exists. | The operation failed because the current resource is being bindded. | |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | The current VPN instance is already bindded with a certificate of the same type. | |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | The client CIDR block conflicts with other resources in the VPC. | |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | The client CIDR block (%s) is invalid. | |
| 400 | VpnConnection.Configuring | The specified service is configuring. | The service is being configured. Try again later. | |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | The destination address is invalid. | |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | The security group is managed and cannot be used. | |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | The security group does not exist in this VPC. | |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId and natGatewayId cannot both be empty. | |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGateway cannot both be empty. | |
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId and natGatewayId cannot both be empty. | |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | The VBR is already bindded to a PCONN. | |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | The specified trafficPath parameter is invalid. | |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | The specified trafficPath parameter contains duplicate values. | |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | Insufficient IPv6 address resources. | |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | The natGatewayId parameter is invalid. | |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because the NAT gateway has dependent endpoint services. | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because the NAT gateway has dependent route entries. | |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because dependent NAT IP addresses exist. | |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because the NAT gateway has dependent NAT CIDR blocks. | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | This IP address is already used by a DNAT rule and cannot be used for SNAT. | |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | This source IP address cannot be used because it is already used for SNAT. | |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | This FULLNAT rule already exists. | |
| 400 | Instance.StatusError | The status of instance error. | The instance status is invalid. | |
| 404 | VRouterId.NotFound | The VRouter not found. | The vRouter instance was not found. | |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | The custom flow log trafficPath feature is not supported for this user. | |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | Operations on system prefix lists are not allowed. | |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | The specification of a pay-as-you-go NAT gateway cannot be modified. | |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | The maximum number of entries in the prefix list exceeds the maximum number of route entries allowed in the associated route table. | |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | The destination IPv6 address specified in the route is within the vSwitch CIDR block. | |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | The specified zone does not support NAT gateways with DDoS protection. | |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | The quota for creating enhanced NAT gateways in the current VPC has been exceeded. | |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | The destination IPv6 CIDR block specified in the route entry overlaps with the vSwitch CIDR block. | |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | The number of available private IP addresses in the current vSwitch is insufficient. | |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | The EIP with Anti-DDoS (Enhanced) enabled cannot be created because the Anti-DDoS Origin service has not been purchased. | |
| 404 | Instance.NotExist | The instance not exist. | The instance does not exist. | |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | The prefix list is in a transitional state and cannot be operated on. | |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | The prefix list cannot be deleted because it is still referenced by other resources. | |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | The prefix list cannot be deleted because it is shared with other accounts. | |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | You cannot operate on a shared prefix list. | |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | The number of CIDR blocks to delete exceeds the number of CIDR blocks in the prefix list. | |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | The specified region does not support prefix list-based routes. | |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | You cannot operate on an operating system prefix list. | |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | The operation failed. The specified reference relationship does not exist in the prefix list. | |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | The FullNat table does not exist. | |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | The maximum number of route entries allowed for the prefix list exceeds the limit. | |
| 400 | InvalidDescription.Malformed | The Description is illegal. | The specified resource description is in an invalid format. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 400 | InvalidName.Malformed | The attribute name is illegal. | The specified name is in an invalid format. | |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | The specified ipVersion value is not supported. | |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | The specified maximum entryCount exceeds the threshold. | |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | The number of CIDR blocks specified exceeds the cidrMaxCount limit. | |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | The cidrBlock parameter is invalid. | |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | The specified cidrName is invalid. | |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | The number of prefix lists that can be created has exceeded the threshold. | |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | You cannot operate on an operating system prefix list. | |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | A shared prefix list cannot be deleted. | |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | The sampling interval parameter is invalid. | |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | The associated resource does not exist. | |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | The gateway route table does not exist. | |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | The number of mappings for the destination IP port has exceeded the quota. | |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | The AliUid of the Vpconn is invalid. | |
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | The router interface specification is invalid. | |
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | The instance owner is incorrect. | |
| 400 | Forbbiden | The router does not belong to your account. | The router does not belong to your account. | |
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | The parameters for editing the router interface are invalid. | |
| 400 | InvalidName.Malformd | The attribute name is illegal. | The property name is invalid. | |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | The specified region does not belong to the service registration endpoint management scope. | |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | The BondRi Connection does not exist. | |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | The specified Virtual Border Router is still in use. | |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | The operation is not allowed. The instance belongs to a managed resource. | |
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | Insufficient bandwidth resources. | |
| 400 | OrderError.EIP | The Account failed to create order. | The order failed to be placed. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | The next hop elastic network interface (ENI) does not exist. | |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | The next hop instance does not exist. | |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | The specified destination address is invalid. | |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | The specified instance does not exist. | |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | The NAT IP resource was not found. | |
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | Frequent purchase and release of EIPs has been detected on your account. New purchases are temporarily unavailable. | |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | A duplicate route CIDR block exists. | |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | The operation failed because the outbound cloud traffic service is not activated. | |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | The next hop instance does not exist. | |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | A dependency conflict exists because custom route tables exist. | |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | The default vSwitch already exists. | |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | Creating a VPC peering connection between a Finance Cloud account and a regular account is not allowed. | |
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM verification failed. | |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | Creating IPv6 routes on a custom route table is not allowed. | |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | You have reached the maximum purchase limit. | |
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | Your account type does not support this transaction. | |
| 400 | Forbidden.Convert | User does not have permission to operate. | The user does not have the permission to perform this operation. | |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | The specified route table is already associated. | |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | The operation failed because the Virtual Border Router (VBR) is already associated with a Cloud Enterprise Network (CEN) instance. | |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | No valid payment method exists in the account. | |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | The specified operation is prohibited because the router interfaces are from different zones. | |
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | The specified VPC does not exist. | |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | The specified traffic mirror source is already attached to the traffic mirror session. | |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | The specified traffic mirror source is not attached to the traffic mirror session. | |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | The specified operation is prohibited because the zone is a CloudBox type. | |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | The specified operation is not allowed because the route table contains route entries whose next hop points to a CloudBox VBR. | |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | The specified operation is not allowed because the route table contains route entries whose next hop points to a non-local CloudBox VBR. | |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | The specified operation is prohibited because the vSwitch is a CloudBox type. | |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | The specified operation is prohibited because only custom route tables can add route entries whose next hop points to a CloudBox VBR. | |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | CloudBox does not support creating high-availability virtual IP addresses. | |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | The specified ENI is not associated with any ECS instance. | |
| 400 | UnsupportedRegion | The feature is not supported in current region. | The current region does not support this feature. | |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | The specified ECS instance does not exist. | |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | The specified SLB instance does not exist. | |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | The specified SLB instance does not belong to any VPC. | |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | The ECS instance does not support the traffic mirroring feature. | |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | The number of traffic mirror sessions has exceeded the quota. | |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | The number of traffic mirror sessions associated with the traffic mirror filter has exceeded the quota. | |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | The quota for the number of traffic mirror sources that can be associated with each traffic mirror session is exceeded. | |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | The quota for the number of traffic mirror sessions that can be associated with a single network interface controller (NIC) is exceeded. | |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | The quota for the number of traffic mirror sessions that can be associated with a single SLB instance is exceeded. | |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | The specified traffic mirror session does not exist. | |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | The traffic mirroring filter rule instance ID parameter is not specified. | |
| 400 | MissingParam.Rules | You must specify rule instance ID. | The traffic mirroring filter rule instance ID is not specified. | |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | The number of traffic mirroring filter rule parameters is invalid. | |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | The traffic mirroring filter rule instance ID parameter is invalid. | |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | The traffic mirror source instance ID parameter is not specified. | |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | The traffic mirror session is not in a valid state. | |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | The quota for the number of filter rules that can be associated with a single traffic mirror filter is exceeded. | |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | The specified traffic mirroring filter rule does not exist. | |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | A network interface controller (NIC) cannot serve as both the traffic mirror source and the traffic mirroring destination of a traffic mirror session. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | The specified ENI does not exist. | |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | The destination CIDR block format is invalid. | |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | The source CIDR block parameter format is invalid. | |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | The source port range parameter format is invalid. | |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | The destination port range parameter format is invalid. | |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | The filter instance ID parameter is not specified. | |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | The specified traffic mirror filter does not exist. | |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | The traffic mirror filter is not in a valid state. | |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | The traffic mirroring filter rule is not in a valid state. | |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | A traffic mirror session still depends on the current resource. | |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | The traffic mirroring filter rule is not specified. | |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | The number of inbound filter rules is invalid. | |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | The number of outbound filter rules is invalid. | |
| 400 | MissingParam.Priority | You must specify Priority. | The priority parameter is not specified. | |
| 400 | MissingParam.Protocol | You must specify Protocol. | The protocol parameter is not specified. | |
| 400 | MissingParam.Action | You must specify Action. | The action parameter is not specified. | |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | The destination CIDR block is not specified. | |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | The source CIDR block is not specified. | |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | The priority parameter is invalid. | |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | The protocol parameter is invalid. | |
| 400 | IllegalParam.Action | The specified Action is invalid. | The action parameter is invalid. | |
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | The EIP and the associated instance must be in the same region. | |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | A next hop that is bindable to multiple IPv6 addresses cannot be specified. | |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | The ShareType parameter is invalid. | |
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | The specified vSwitch does not exist. | |
| 400 | IncorrectBusinessStatus.TrafficMirror | The business status of traffic mirror is incorrect. | The commercial status of the traffic mirroring service is invalid. | |
| 400 | OptInRequired.TrafficMirror | You need to subscribe to the traffic mirror service first. | The traffic mirroring service is not activated. | |
| 400 | QuotaExceeded.TrafficMirrorFilter | The maximum number of traffic image filters is exceeded. | The quota for the number of traffic mirror filters has been exceeded. | |
| 400 | IllegalParam.PortRange | The specified port range is invalid. | The port range parameter is invalid. | |
| 400 | IllegalParamFormat.Name | The specified Name is invalid. | The name parameter format is invalid. | |
| 400 | IllegalParamFormat.Description | The specified description is invalid. | The description parameter format is invalid. | |
| 400 | IpInstanceId.BizStatusInvalid | The specified EIP BizStatus is incorrect. | The business status of the specified EIP is incorrect. | |
| 400 | OperationUnsupported.BindMultipleType | You cannot bind HaVip to multiple instance types. | You cannot associate with an ECS instance and a network interface controller (NIC) at the same time. | |
| 400 | InvalidNetworkInterfaceId.NotFound | The network interface is not found. | The elastic network interface (ENI) does not exist. | |
| 400 | OperationUnsupported.BindOnFreeNetworkInterface | The network interface must be attached to an ECS instance. | The ENI must be attached to an ECS instance. | |
| 400 | OperationFailed.QueryNetworkInterfaceInfo | Failed to query network interface information. | Failed to query the ENI information. | |
| 400 | IllegalParam.InstanceType | The specified instance type is invalid. Only ECS instances and network interface are allowed. | The type of the associated instance is not allowed. | |
| 400 | OperationUnsupported.BindOnSameEcs | You cannot bind two network interfaces on the same ECS instance. | You cannot associate two ENIs on the same ECS instance. | |
| 400 | OperationUnsupported.HavipBindType | You cannot bind HAVIP to network interface in the specified region. | ENI association is not supported in your region. | |
| 400 | IllegalParam.OwnerAliUid | The specified AliUid is invalid. | The user ID is an invalid parameter. | |
| 400 | InvalidInstance.NotExist | The bound instance does not exist. | The associated instance does not exist. | |
| 400 | InvalidIpInstanceId.NotFound | The specified Eip InstanceId does not exist in our records. | The specified EIP instance does not exist. | |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId is already added to the bandwidth package. | The EIP instance has already been added to a NAT service plan. | |
| 400 | IllegalParam.LocalAsn | The specified LocalAsn is invalid. | The local autonomous system number is invalid. | |
| 400 | IllegalParam.LocalBgpIp | The specified LocalBgpIp is invalid. | The local BGP address is invalid. | |
| 400 | OperationUnsupported.SetNatTraversal | Current version of the VPN does not support setting NAT traversal. | The current VPN gateway version does not support the NAT traversal feature. | |
| 400 | OperationUnsupported.SetDPD | Current version of the VPN does not support setting DPD. | The current VPN gateway version does not support the DPD feature. | |
| 400 | MissingParam.CustomerGatewayAsn | Asn of customer gateway is mandatory when BGP is enabled. | When BGP is enabled, the autonomous system number of the customer gateway cannot be empty. | |
| 400 | OperationFailed.InvalidStatus | Route entry is not allowed to operate in current status. | Operations on this route are prohibited in the current state. | |
| 400 | VpnRouteEntry.BackupRoute | Validate backup route entry failed. | The active/standby routes routing entry validation failed. | |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to a non-RI and non-VPN next hop on the same network block. | A route that points to a resource other than a router interface or VPN gateway already exists for the same CIDR block in the VPC route table. | |
| 404 | ResourceNotFound.NatGateway | The NatGateway instance not exist. | The NAT gateway does not exist. | |
| 400 | OperationUnsupported.IpNotInCbwp | The specified eip not exist in the commonBandwidthPackage. | The EIP does not exist in the NAT service plan. | |
| 400 | VpnRouteEntry.AlreadyExists | The specified route entry is already exist. | The route already exists. | |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting pbr route entry priority. | The current VPN gateway version does not support the policy-based route priority feature. | |
| 400 | OperationFailed.HavipBoundPortmap | Operation failed because Havip instance already bound portmap. | The operation failed because the HaVip instance is already associated with a port mapping. | |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | When an ENI is associated with an EIP in cut-through mode, the ENI must be disassociated from the ECS instance. | |
| 400 | InvalidStatus.NotAllow | Bind instance status invalid | The instance status of the attached instance is invalid. | |
| 404 | OperationDenied.VpcIpv4GatewayEnabled | The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway. | The operation is not allowed because the IPv4 gateway has been enabled for the VPC of the NAT gateway. | |
| 400 | QuotaExceeded.NumberOfEip | Binded eip Quota exceed on this NatGw. | The number of EIPs associated with this NAT gateway has exceeded the quota limit. | |
| 400 | InvalidAction.Denied | Action is denied due to unfinished Eip configuration modification. | The operation was rejected because the EIP configuration modification has not been completed. | |
| 400 | UnsupportedFeature.NatQosEntry | The specified natGateway can not support the qos entry feature. | This NAT instance does not support the protective rate limiting feature. | |
| 400 | ResourceAlreadyExist.NatQosEntry | The specified natGateway qosEntry already exists | This rate limiting rule already exists. | |
| 400 | ResourceQuotaExceeded.NatQosEntry | The specified natGateway qosEntry quota exceed. | The number of protective rate limiting entries for this NAT gateway has reached the quota. | |
| 400 | ResourceNotFound.QosTableIdOrNatGatewayId | natGatewayId and qosTableId can not both be null | The natGatewayId and qosTableId parameters cannot both be empty. | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | The parameters %s and %s are mutually exclusive. | |
| 400 | IncorrectStatus.NatGateway | The status of natgateway is incorrect. | The status of the NAT gateway is incorrect. | |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | The %s resource depends on %s. The operation cannot be completed. | |
| 400 | InvalidParams.NotNull | The parameter must not be null, name or description or icmpReplyEnabled | The name, description, and ICMP echo reply enable parameter cannot all be empty. | |
| 400 | IncorrectStatus.NATGW | NATGW status is invalid. | The status of the NAT gateway is incorrect. | |
| 400 | UnsupportedFeature.IcmpReplyEnabled | The feature of IcmpReplyEnabled is not supported. | Modifying the ICMP echo reply feature is not supported. | |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | The VPC has a reverse access authorization relationship and cannot be deleted. | |
| 400 | OperationDenied.DeleteManagedRouteEntry | The operation is not allowed because of route entry is managed. | A route managed by a cloud service cannot be deleted. | |
| 400 | OperationDenied.ModifyManagedRouteEntry | The operation is not allowed because of route entry is managed. | A managed route cannot be modified. | |
| 400 | UnsupportedFeature.IndirectConvertForVpcNat | The VPC NAT gateway is not support to change EIP bond type. | VPC NAT gateways do not support modifying the EIP bindng type. | |
| 400 | OperationDenied.EipBondTypeIsAlreadyNAT | The EIP bond type is already NAT type. | The EIP binding type is already NAT. | |
| 400 | UnsupportedFeature.NormalNatModifyEipBindMode | The normal NAT gateway is not support to change EIP bond type. | Standard NAT gateways do not support modifying the EIP binding type. | |
| 400 | UnsupportedFeature.IndirectConvertForFwNat | The security protection enabled NAT gateway is not support change EIP bond type. | Internet NAT gateways with the protection feature enabled do not support modifying the EIP binding type. | |
| 400 | UnsupportedFeature.FwNatInMutilBindedEipBindType | The FW NAT in MUTIL_BINDED eip bind type is can not be created. | Creating a protection-enabled NAT gateway with the EIP binding type set to MULTI_BINDED is not supported. | |
| 403 | Forbidden.ModifyEipBondType | Authentication is failed for modify EIP bond type. | Modifying the EIP binding type is not allowed. | |
| 400 | OperationDenied.NoEnoughAvailablePrivateIps | The available private Ip number is not enough in your subnet. | The subnet does not have enough available private IP addresses. | |
| 400 | OperationDenied.NatGatewayStatusInvalid | The NAT gateway status is invalid. | The status of the NAT gateway is invalid. | |
| 400 | OperationDenied.EipStatusInvalid | The NAT gateway has EIP in invalid status. | The status of the EIP associated with the NAT gateway is invalid. | |
| 400 | OperationDenied.SnatEntryStatusInvalid | The NAT gateway has SNAT entry in invalid status. | The status of the SNAT entry configured on the NAT gateway is invalid. | |
| 400 | OperationDenied.DnatEntryStatusInvalid | The NAT gateway has DNAT entry in invalid status. | The status of the DNAT entry configured on the NAT gateway is invalid. | |
| 400 | nsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not support to enable security protection. | VPC NAT gateways do not support enabling security protection. | |
| 400 | QuotaExceeded.EipNumForModifyEipBondType | The quota of %s is exceeded, binded: %s, quota: %s. | The number of EIPs allowed when modifying the EIP binding type has been exceeded. | |
| 400 | UnsupportedFeature.MutilBindedTypeNatEnableFw | The NAT with Mutil-Binded Eip bind type is not support enable firewall. | A NAT gateway with EIPs associated in Multi-Binded mode does not allow enabling the firewall. | |
| 400 | UnsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not supported to enable security protection. | VPC NAT gateways do not support enabling security protection. | |
| 400 | ResourceNotEnough.SwitchAvailableIps | The available private Ip number is not enough in your subnet. | The subnet does not have enough available private IP addresses. | |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | The vSwitch has joined a multicast domain and cannot be deleted. | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The DryRun check passed. | |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | The Express Connect authorization relationship does not exist. | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | Tags and resource groups cannot both be empty. | |
| 400 | MissingParameter.TagKey | The input parameter TagKey that is mandatory for processing this request is not supplied. | The TagKey parameter is missing. | |
| 400 | MissingParameter.TagValue | The input parameter TagValue that is mandatory for processing this request is not supplied. | The TagValue parameter is missing. | |
| 400 | InvalidTagKey | The tag keys are not valid. | The tag index is invalid. | |
| 400 | InvalidTagValue | The tag values are not valid. | The tag value is invalid. | |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | The instance type was not found. | |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | The instance ID was not found. | |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | You do not have the permission to operate on TagKeys. | |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | The quota has been exceeded. | |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | The number of resource group IDs has been exceeded. | |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | The resource scope is invalid. | |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | The number of tags has been exceeded. | |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | The tag resource is duplicated. | |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because the status of this RouterInterface is not correct. | The current instance status does not allow deletion. Wait until the status changes and try again. | |
| 400 | OperationDenied.UseGatewayRouteEntryQueryInterface | Use listGatewayRouteTableEntries to describe gateway route entries. | To query route entries in a gateway route table, use the listGatewayRouteTableEntries operation. | |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in ec region list. | The specified regionId is invalid. Check the value. | |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because status of this RouterInterface is not correct. | The current instance status does not allow deletion. Wait until the status changes and try again. | |
| 400 | UnsupportedRegion | The feature of prefixList entry is not supported in this region. | Prefix list routes are not supported in this region. | |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | Duplicate cidrBlock values were specified. | |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | The specified prefixList does not exist. | |
| 400 | OperationDenied.NormalNatExist | The operation is not allowed because of existing normalNat. | The operation is not allowed because a standard NAT gateway exists in the VPC. | |
| 400 | OperationDenied.DirectEipExist | The operation is not allowed because of existing directEip. | The operation is not allowed because an EIP or enhanced NAT gateway exists in the VPC. | |
| 400 | OperationDenied.SubnetRouteV1Exist | The operation is not allowed because of existing subnetRouteV1. | The operation is not allowed because the subnet routes in the VPC do not meet the specifications. | |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because of VpcPeerExists. | The operation is not allowed because a VPC peering connection instance exists in the VPC. | |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because the VpcPeer exists. | The operation is not allowed because a VPC peering connection exists in the VPC. | |
| 400 | ResourceNotFound | The specified resource %s is not found. | The specified resource does not exist. | |
| 400 | IllegalParam.ipVersion | The IP version does not match. | The IP version does not match. | |
| 400 | OperationUnsupported.VirtualBorderRouterEnableIPv6 | The operation failed. The device or region does not support IPv6 functions. | The operation failed because the device or region does not support IPv6. | |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | The router interface does not support IPv6. | |
| 400 | IllegalParam.VlanId | The parameter VlanId is illegal. | The VlanId parameter is invalid. | |
| 400 | IllegalParam.Spec | The parameter Spec is illegal. | The Spec parameter is invalid. | |
| 400 | OperationFailed.VPconnCreated | The operation failed because VPconn is already created. | The Vpconn already exists. Do not create it again. | |
| 400 | OperationDenied.VpconnVBRAssociatePconn | The operation is not allowed because of VpconnVBRAssociatePconn. | The operation failed because the VBR of the Vpconn is not allowed to bindto a Pconn. | |
| 400 | OperationFailed.VbrBindedPconn | The operation failed because of VbrBindedPconn. | The operation failed because the VBR is bindto a Pconn. | |
| 400 | OperationDenied.VBRAssociateVPconn | The operation is not allowed because of VBRAssociateVPconn. | The VBR is not allowed to bindto a Vpconn. | |
| 400 | OperationDenied.VPconn | The operation is not allowed because of VPconn. | The Vpconn type does not support this operation. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of [%s] is incorrect. | The PhysicalConnection is in an invalid state. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s is incorrect. | The PhysicalConnection is in an invalid state. | |
| 400 | IncorrectStatus.VBR | The status of VBR is incorrect. | The VBR is in an invalid state. | |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The operation failed because of VirtualPhysicalConnectionExistVBR. | A VBR already exists for the VirtualPhysicalConnection. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of PhysicalConnection is incorrect. | The Express Connect circuit is in an invalid state. | |
| 400 | OperationFailed.BandwidthOrVlanIdEmpty | The specified VBR bandwidth or VlanId is empty. | The bandwidth or VlanId of the selected VBR is empty. | |
| 400 | IllegalParam.SecondaryCidrBlock | SecondaryCidrBlock is illegal. | The secondary CIDR block parameter is invalid. | |
| 400 | OperationFailed.IpV6VSwitchInuse | Operation failed because some vswitch ipv6 is in use. | The IPv6 vSwitch is still in use. | |
| 400 | QuotaExceeded.GUAIpv6CidrBlock | GUAIpv6CidrBlock quota exceeded. | The GUAIpv6CidrBlock has reached the quota limit. | |
| 400 | VpnRouteEntry.Conflict | The specified route entry has conflict. | A route entry conflict exists. | |
| 400 | IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current state of the CBN is incorrect. | |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | The vSwitch is associated with a route table and cannot be deleted. | |
| 400 | OperationUnsupported.ForwardEntry | Duplicated destination ip port is unsupported. | Duplicate destination IP ports are not supported. | |
| 400 | OperationFailed.UnpaidBillsExist | The account has unpaid bills. Please pay your overdue bill first. | This account has unpaid orders. | |
| 400 | OperationFailed.Ipv6InstanceExist | Operation failed because vswitch has ipv6 instance. | IPv6 instances exist in the vSwitch. | |
| 400 | OperationFailed.CidrInUse | Operation failed because cidr is in use. | The CIDR block is in use. | |
| 400 | OperationFailed.InvalidCidrBlock | Operation failed because the specified network block is invalid. | The CIDR block is invalid. | |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | A route conflict exists in the route table. | |
| 400 | OperationUnsupported.AdvancedFeature | Advanced features of the vpc is unsupported. | The advanced feature is not supported. | |
| 400 | OperationUnsupported.BindOnMultipleVswitch | The bound instance and HaVip must be on the same vSwitch. | The associated instance and the HaVip must be in the same vSwitch. | |
| 400 | OperationFailed.InformationIncomplete | Your information is incomplete. | The input information is incomplete. | |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | The specified priority parameter conflicts with an existing priority. | |
| 400 | OperationFailed.PconnAllocateVlan0 | Vlan 0 Vbr cannot share the physical connection with another Vbr. | VLAN 0 on the Express Connect circuit cannot coexist with other Virtual Border Routers (VBRs). | |
| 400 | OperationFailed.PconnExistVlan0Vbr | The physical connection has VLAN 0 VBR. You cannot create another VBR. | A VLAN 0 VBR already exists on the Express Connect circuit. You cannot create other VBRs. | |
| 400 | OperationFailed.Vlan0VbrUnSharePconn | VLAN 0 VBR cannot share the physical connection with another VBR. | Another VLAN 0 VBR already exists on the Express Connect circuit. You cannot create a VLAN 0 VBR on this circuit. | |
| 400 | Forbidden.NatPayBySpec | Pay-by-specification NAT is no longer supported. Newly purchased pay-as-you-go NAT gateways only support the pay-by-CU metering method. | Specification-based billing for NAT gateways is no longer available. Select a NAT gateway that uses the pay-by-CU billing method. | |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | The operation is prohibited because the router interface points to a different VPC. | |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | The operation is prohibited because the next hop of the route entry is a router interface whose peer is a VBR, and the router interface cannot be in the Idle state. | |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | The operation is prohibited because the route table is associated with a CloudBox vSwitch and cannot add a route entry that points to a VBR in another CloudBox. | |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | The CidrBlock parameter is invalid. | |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | The operation is prohibited because the route table is associated with a non-CloudBox vSwitch and cannot add a route entry that points to a CloudBox VBR. | |
| 400 | UnsupportedFeature.CloudBoxIpv6 | The IPv6 feature is not supported by cloud box. | CloudBox does not support IPv6. | |
| 400 | OperationDenied.NatgwExist | The operation is not allowed because the NAT gateway exists in VPC. | The operation is prohibited because a NAT gateway exists in the VPC. | |
| 400 | OperationDenied.CenAttached | The operation is not allowed because the VPC is attached to CEN. | The operation is prohibited because the VPC is associated with a Cloud Enterprise Network (CEN) instance. | |
| 400 | OperationDenied.CloudBoxVSwitchExist | The operation is not allowed because a cloud box type vSwitch exists in VPC. | The operation is prohibited because CloudBox vSwitches exist in the VPC. | |
| 400 | OperationDenied.CloudBoxResourceExist | The operation is not allowed because there are resources related to the cloud box in VPC. | The operation is prohibited because CloudBox-related resources exist in the VPC. | |
| 400 | OperationDenied.VpcPeerExist | The operation is not allowed because the VPC peer exists. | The operation is prohibited because a VPC peering connection exists in the VPC. | |
| 400 | OperationFailed.QueryCenIpv6Status | Failed to query the IPv6 status of the specified VPC in CEN. | Failed to query the IPv6 status of the VPC in the CEN instance. | |
| 400 | OperationUnsupported.CenIpv6Enabled | The IPv6 feature is enabled in CEN. | The IPv6 feature is already enabled in the CEN instance. | |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | The operation failed because outbound traffic is not enabled. | |
| 400 | OperationFailed.TargetUserPconnTrafficNotEnable | The operation failed because of TargetUserPconnTrafficNotEnable. | The operation failed because the destination account has not enabled outbound cloud traffic. | |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | The traffic mirror source instance ID parameter contains duplicate values. | |
| 400 | ResourceNotFound.NetworkInterfaceId | The specified resource is not found. | The resource was not found. | |
| 400 | IncorrectStatus.NatIp | The status of %s [%s] is incorrect. | The status of NatIp is incorrect. | |
| 400 | UnsupportedFeature.PrivateLinkMode | The feature of %s is not supported. | The reverse access feature is not supported. | |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | Dependent resources exist. | |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of %s is not found. | The FullNatEntry was not found. | |
| 400 | IllegalParamFormat.NatIp | The param format of %s[%s] is illegal. | The format of the NAT IP address is invalid. | |
| 400 | IncorrectStatus.FullNatEntry | The status of %s [%s] is incorrect. | The current status of the FullNatEntry is invalid. | |
| 400 | QuotaExceeded.FullNatEntry | The quota of %s is exceeded, usage %s/%s. | The number of FullNatEntry entries has exceeded the quota. | |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified resource of [%s] is not found. | The PhysicalConnection does not exist. | |
| 400 | IncorrectStatus.VbrId | The status of %s is incorrect. | The instance status of the VBR is invalid. | |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified PhysicalConnectionId [%s] is not found. | The PhysicalConnectionId was not found. | |
| 400 | IllegalParam.Bandwidth | The param of Bandwidth [%s] is illegal. | The specified bandwidth value is invalid. | |
| 400 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the route to create conflicts with the client IP pool of the IPsec server. | The destination CIDR block of the route conflicts with the client CIDR block of the IPsec server. | |
| 400 | ResourceNotFound.PhysicalConnectionId | PhysicalConnection is not found. | The PhysicalConnectionId was not found. | |
| 400 | OperationDenied.VpnConfiguring | The associated VPN gateway is being configured. You cannot update the attributes of the customer gateway. | The associated VPN gateway is being configured. You cannot modify the customer gateway configuration. | |
| 400 | OperationDenied.VpnFinancialLocked | The associated VPN gateway is financially locked. You cannot update the attributes of the customer gateway. | The associated VPN gateway is locked due to overdue payment. You cannot modify the customer gateway configuration. | |
| 400 | OperationDenied.MissingAsn | The autonomous system number of the customer gateway is mandatory when BGP authentication key is specified. | The autonomous system number must be specified when a BGP authentication key is specified for the customer gateway. | |
| 400 | OperationDenied.AlreadyNewest | The operation is denied because the firmware version of the VPN gateway is already the latest. | The firmware version of the VPN gateway is already the latest and cannot be upgraded again. | |
| 400 | InvalidAuthkey.Malformed | The specified BGP authentication key (%s) is malformed. | The BGP authentication key is invalid. | |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | The VPC cannot be deleted because it still contains endpoints. Delete the endpoints in the VPC first, and then delete a VPC. | |
| 400 | Parameter.Illegal | The parameter is illegal. | The parameter is invalid. | |
| 400 | IllegalParam.IpAddress | The specified IP address (%s) is illegal. | The IP address is invalid. | |
| 400 | IllegalParam.CidrBlock | The param of (%s) is illegal. | The CIDR block is invalid. | |
| 400 | InvalidLoadBalancerId.NotFound | The specified resource of load balancer is not found. | The specified SLB instance does not exist. | |
| 400 | OperationFailed.AllocateUnfamiliarIp | The operation failed because only IP addresses used within the last seven days can be allocated. | The specified EIP application only allows you to apply for IP addresses that were used within the last 7 days. | |
| 400 | OperationFailed.Ipv6GatewayInUse | The IPv6 gateway is in use. | The VPC attributes cannot be modified because the IPv6 gateway is still in use. | |
| 400 | InvalidRegionId.NotFound | The specified region is not found. | The specified region does not exist. | |
| 500 | SystemBusy | The system is busy. Please try again later. | The system is busy. Try again later. | |
| 400 | IncorrectStatus.VpcRouteEntry | The status of the specified routeEntry is invalid. | The status of the VPC route entry is invalid. | |
| 400 | OperationFailed.IPv6Disabled | Operation failed because IPv6 is not enabled for the vSwitch. | The specified operation failed because the IPv6 feature is not enabled. | |
| 400 | OperationFailed.CenLevelNotSupport | When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP. | BGP cannot be enabled on the VPN gateway when the VPC to which the VPN gateway belongs has joined a Cloud Enterprise Network (CEN) instance with route synchronization enabled. | |
| 400 | OperationDenied.OtherSubnetCreating | The operation is not allowed because a subnet is being created. | The specified operation is prohibited because another virtual subnet is being created. | |
| 500 | OperationFailed.NormalInventoryNotEnough | Standard NAT gateways are no longer offered. You can create enhanced NAT gateways and set the correct natType. | Standard NAT gateways are no longer supported. Create an enhanced NAT gateway and make sure that the NatType parameter is correctly configured. | |
| 400 | QuotaExceeded.VpnRouteEntry | The number of route entries to the VPN gateway in the VPC routing table has reached the quota limit. | The number of route entries that point to the VPN gateway in the VPC route table has reached the quota limit. | |
| 400 | IllegalParam.EgressAclEntryId | The specified EgressAclEntryId is invalid. | The outbound ACL rule ID is invalid. | |
| 400 | IllegalParam.IngressAclEntryId | The specified IngressAclEntryId is invalid. | The inbound ACL rule ID is invalid. | |
| 400 | InstanceNotExist.NATGWSchedule | The scheduled migration information of the NAT gateway does not exist. | The scheduled migration information for the NAT gateway does not exist. | |
| 400 | OperationFailed.QuotaExceedPerTimeWindow | The maximum number of scheduled migration within the specified time window is exceeded. | The operation failed because the number of scheduled tasks within the specified time window has reached the upper limit. | |
| 400 | InstanceExist.NatgwScheduledMigration | The scheduled migration information of the NAT gateway already exists. | The scheduled migration information for the NAT gateway already exists. | |
| 400 | InvalidPhoneNum.Malformed | The parameter PhoneNum is invalid. | The PhoneNum parameter is invalid. | |
| 400 | InvalidReservationTime.Malformed | The parameter ReservationTime is invalid. | The ReservationTime parameter is invalid. | |
| 400 | MissingParam.ScheduledMigrationParam | You must specify the parameters that are required for the scheduled migration. | Required parameters for the scheduled migration of the NAT gateway are missing. | |
| 400 | OperationUnsupported.NATGWBONDINGENI | Operation is unsupported because the specified network interface is created with enhanced NAT gateway. | The operation failed because the bound ENI instance was created by an enhanced NAT gateway. | |
| 400 | OperationFailed.NotSupportBizType | The specified instance type does not support the operation. | The operation failed because the specified instance type does not support this operation. | |
| 400 | OperationFailed.NatGwBandwidthQuotaExceed | The total bandwidth of the EIP bound to the NAT gateway exceeds the quota. | The operation failed because the total bandwidth of EIPs associated with the NAT gateway exceeds the limit. | |
| 400 | IpInstanceId.ChargeType.NotSupport | You cannot add subscription EIP instance to the bandwidth package. | A subscription EIP cannot be added to an Internet Shared Bandwidth instance. | |
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | The specified Internet Shared Bandwidth instance has been financially locked. IP addresses cannot be added. | |
| 400 | IpInstanceId.QuotaExceeded | The maximum number of EIP that you can add to the bandwidth package is exceeded. | The number of EIPs that can be added to the Internet Shared Bandwidth instance has reached the upper limit. | |
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | The EIP is being added to the Internet Shared Bandwidth instance too frequently. Try again later. | |
| 400 | IpInstanceId.InvalidIpInternetChargeType | You cannot add the hybrid cloud EIP to a pay by traffic bandwidth package. | An EIP in hybrid cloud mode cannot be added to a pay-by-data-transfer Internet Shared Bandwidth instance. | |
| 400 | TaskConflict | The operation is too frequent. Please try again later. | The operation is too frequent. Try again later. | |
| 400 | IncorrectStatus.Eip | An EIP status error occurred. | The EIP status is invalid. | |
| 400 | OperationUnsupported.IpType | The EIP type does not support the operation. | This type of EIP cannot be added. | |
| 400 | OperationFailed.DistibuteLock | The resource is locked and cannot be operated. | The resource is locked. Operations are not allowed. | |
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | An EIP in hybrid cloud mode cannot be added to a low-bandwidth Internet Shared Bandwidth instance. | |
| 400 | OperationFailed.IPsecServerExist | An IPsec server already exists in the VPN gateway. | An IPsec server already exists in the VPN gateway. | |
| 400 | VpnGateway.SslVpnDisabled | The VPN gateway has not enabled SSL VPN. | The SSL-VPN feature is not enabled on the VPN gateway. | |
| 400 | OperationUnsupported.IPsecServer | The current version of the VPN gateway does not support IPsec server. | The current VPN gateway version does not support the IPsec server. | |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | The specified next hop does not support IPv6. | |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | The IPv6 address of the specified next hop is being created or deleted. | |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | Creating an IPv6 route with the primary ENI as the next hop is not allowed. | |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | The private IP parameter cannot be specified when creating an IPv6 route. | |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | The elastic network interface (ENI) on the attachment does not exist. | |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | No available elastic network interface (ENI) exists on the attachment. | |
| 400 | InvalidAttachment.NotFound | The attachment is not found. | The attachment does not exist. | |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | Failed to query the attachment information. | |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | The attachment is invalid. | |
| 400 | OperationFailed.NormalInventoryNotEnough | Operation failed because the inventory of standard NAT gateway is insufficient. | The operation failed because the inventory of standard NAT gateways is insufficient. | |
| 400 | OperationUnsupported.PrePaidPyByLcu | The operation failed because the subscription NAT gateway does not support the pay-by-LCU billing method. | Subscription NAT gateway instances do not support the PayByLcu billing method. | |
| 400 | OperationFailed.VswBindedRouteTable | The operation failed because a custom route table that contains subnet routes is associated with the specified VSwitch. | The operation failed because the vSwitch is associated with a subnet route table. | |
| 400 | OperationFailed.VswBindedAcl | The operation failed because a network ACL is associated with the specified VSwitch. | The operation failed because the specified vSwitch is associated with a network ACL. | |
| 400 | OperationUnsupported.SkipConstruction | You are not authorized to skip the construction. | You do not have the permission to skip construction to payment. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found. | No Express Connect circuit was found for the specified circuit ID. | |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in the Allocated state. | The specified PhysicalConnectionId is not in the Allocated state. | |
| 400 | MissingParam.AliUid | You must specify AliUid. | The AliUid parameter is missing. | |
| 400 | MissingParam.RegionNo | You must specify RegionNo. | The RegionNo parameter is missing. | |
| 400 | MissingParam.PhysicalConnectionId | You must specify PhysicalConnectionId. | The PhysicalConnectionId parameter is missing. | |
| 400 | MissingParam.Name | You must specify Name. | The instance name is missing. | |
| 400 | MissingParam.Description | You must specify Description. | The instance description is required. | |
| 400 | IncorrectStatus.NATGW | The status of the specified NAT gateway is abnormal. | The NAT gateway is in an abnormal state. | |
| 400 | OperationUnsupported.NotPConnOwner | Only the owner of the leased line can update the bandwidth. | Only the Express Connect circuit owner can update the bandwidth. | |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | The specified billing type is unavailable. | |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | The specified instance does not exist. | |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | The specified billing cycle is invalid. | |
| 400 | OperationUnsupported.NormalInventoryNotEnough | Operation is unsupported because the inventory of standard NAT gateway is insufficient. | The operation failed because the inventory of standard NAT gateways is insufficient. | |
| 400 | OperationFailed.VswHasRouteTable | Operation failed because the specified VSwitch is associated with a route table. | The operation failed because the specified vSwitch is associated with a subnet route table. | |
| 400 | OperationFailed.VswHasAcl | Operation failed because the specified VSwitch is associated with a network ACL. | The operation failed because the specified vSwitch is associated with a network ACL. | |
| 400 | QuotaExceeded.VBRBandwidth | The VBR bandwidth must not exceed the physical connection bandwidth. | The Virtual Border Router bandwidth exceeds the limit of the Express Connect circuit bandwidth. | |
| 400 | MissingParam.Bandwidth | You must specify Bandwidth. | The bandwidth parameter is missing. | |
| 400 | MissingParam.InstanceId | You must specify InstanceId. | Missing param of InstanceId. | |
| 400 | InvalidInstanceId.NotFound | The InstanceId is not found. | The instance specified by InstanceId was not found. | |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | The specified bandwidth value is invalid. | |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | The quota for virtual border router bandwidth is exceeded. | The VirtualBorderRouterBandwidth quota has been exceeded. | |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | You cannot set the bandwidth of VBR with multiple physical connections. | Setting bandwidth is not supported for a VBR with multiple physical connections. | |
| 400 | OperationUnsupported.ModifyBandwidth | You cannot modify the bandwidth of the VBR in sale. | Modifying the bandwidth of a commercial VBR to a different value is not allowed. | |
| 400 | OperationUnsupported.RegionAndServiceLocationNotMatch | Operation is not supported because the region and service location do not match. | The operation is not supported because the region and service area are not supported. | |
| 400 | OperationFailed.EniTypeNotSupport | Operation failed because the ENI type is not supported. | The type of the secondary ENI does not support this operation. | |
| 400 | OperationFailed.CanNotUseEipInDnat | Operation failed because the EIP cannot be used to create a forward entry. | The operation failed because the EIP cannot be used to create a DNAT entry. | |
| 400 | OperationUnsupported.EipNatGWCheck | Operation is not supported because the relation check of EIP and NAT gateway has failed. | Operation is not supported because the relation check of EIP and NAT gateway has failed. | |
| 400 | OperationUnsupported.VpcAttachedCen | Operation failed because the VPC is attached to CEN. | The operation failed because the VPC is attached to a Cloud Enterprise Network (CEN) instance. | |
| 400 | OperationUnsupported.RouterInterfaceExist | Operation failed because the VPC has a router interface. | The operation failed because the VPC has existing router interfaces. | |
| 400 | OperationFailed.VRouterNotExist | Operation failed because the VRouter does not exist. | The operation failed because the vRouter does not exist. | |
| 400 | OperationFailed.SnatQuotaExceed | Operation failed because the maximum number of SNAT entry is exceeded. | The operation failed because the number of SNAT entries is excessive. | |
| 400 | OperationFailed.DnatQuotaExceed | Operation failed because the maximum number of forward entry is exceeded. | The operation failed because the number of DNAT entries is excessive. | |
| 400 | OperationFailed.EnhancedUserIsUnAuthorized | Operation failed because the user is not authorized to create an enhanced NAT gateway. | The operation failed because the user is not authorized to create an enhanced NAT gateway. | |
| 400 | OperationFailed.EnhancedRegion | Operation failed because enhanced NAT gateways are not available for sale in the specified region. | The operation failed because enhanced NAT gateways are not available for purchase in the current region. | |
| 400 | OperationFailed.EnhancedQuotaExceed | Operation failed because the maximum number of enhanced NAT gateways in the same VPC is exceeded. | The operation failed because the number of enhanced NAT gateways in the current VPC exceeds the limit. | |
| 400 | InvalidBandwidthPackageIdNumber.NotSupported | The number of BandwidthPackageIds exceeds the limit. | The number of Internet Shared Bandwidth instances exceeds the quota limit. | |
| 400 | InvalidResourceGroupId | The specified ResourceGroupId does not exist. | The resource group ID does not exist. | |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroup is not supported in this region. | The resource group feature is not enabled. | |
| 400 | OrderError.EIP | The account failed to create an order. | The order failed to be placed. | |
| 400 | OperationFailed.SnatIpsTooMany | The maximum number of IP addresses is exceeded in the SNAT pool. | The number of IP addresses in the SNAT pool is excessive. | |
| 400 | IncorrectStatus.VSWITCH | The status of the specified VSwitch is invalid. | The vSwitch is in an abnormal state. | |
| 400 | OperationFailed.VswNotBelongToVpc | Operation failed because the specified VSwitch is not bound to the same VPC with NAT gateway. | The operation failed because the vSwitch and the NAT gateway do not belong to the same VPC. | |
| 400 | OperationFailed.VSwitchNoAvailableIp | Operation failed because the number of available IP addresses of the specified VSwitch is insufficient. | The operation failed because the vSwitch does not have sufficient active IP addresses. | |
| 400 | OperationFailed.VpnConnectionExist | Auto propagate cannot be closed when VPN connections with BGP enabled exist. | Automatic propagation of routing cannot be shutdown when a VPN connection with BGP enabled exists. | |
| 400 | OperationUnsupported.EnhancedCURegion | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | |
| 400 | NoPermission.CreateServiceLinkedRole | You are not authorized to create service linked role. | You do not have the permission to create a service-linked role. | |
| 400 | OperationUnsupported.EnhancedRegion | Enhanced NAT Gateway is not supported in this region. | Enhanced NAT Gateway is not supported in this region. | |
| 400 | MissingParam.NatGatewayId | You must specify NatGatewayId. | The NatGatewayId parameter is required. | |
| 400 | OperationFailed.RegionNotSupport | The specified region does not support the feature. | This feature is not supported in the current region. | |
| 400 | OperationFailed.NoPermission | You are not authorized to perform the operation. | You do not have the permission to perform this operation. | |
| 400 | OperationFailed.NatGatewayNotExist | The specified NatGateway does not exist. | The operation failed because the NAT gateway does not exist. | |
| 400 | OperationFailed.NatTypeInvalid | Only enhanced NAT gateway supports the operation. | Only enhanced NAT gateways support this operation. | |
| 400 | OperationFailed.EcsMetricNotEnabled | The feature is not enabled for enhanced NAT gateway. | This feature is not enabled on the enhanced NAT gateway. | |
| 400 | MissingParam.TimePoint | You must specify TimePoint. | The TimePoint parameter is required. | |
| 400 | IllegalParam.OrderKey | The specified OrderKey is invalid. | The OrderKey parameter is invalid. | |
| 400 | IllegalParam.OrderType | The specified OrderType is invalid. | The OrderType parameter is invalid. | |
| 400 | IllegalParam.NextTokenExpired | The specified NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | IllegalParam.Mode | The specified Mode is invalid. | The Mode parameter is invalid. | |
| 400 | OrderError.EIP | Failed to place an order. | The order failed to be placed. | |
| 400 | OperationFailed.VswNotExist | The specified VSwitch does not exist. | The specified vSwitch does not exist. | |
| 400 | OperationFailed.VpcNotExist | The specified VPC does not exist. | The specified VPC does not exist. | |
| 400 | OperationUnsupported.NatConvert | The NAT gateway conversion function is not supported. | The NAT gateway type conversion feature is not supported. | |
| 400 | OperationFailed.NatTypeNotEnhanced | Operation failed because the specified NAT gateway type is not enhanced. | The operation failed because the specified NAT gateway is not an enhanced NAT gateway. | |
| 400 | OperationFailed.NatGwBindWithBandwidthPackage | Operation failed because the NAT gateway is bound to bandwidth packages. | The operation failed because the NAT gateway instance is associated with a NAT service plan. | |
| 400 | IncorrectStatus.NatGateway | The status of NAT gateway is incorrect. | The NAT gateway is in an invalid state. | |
| 400 | OperationFailed.EipInMiddleStatus | Operation failed because the status of EIP associated with the specified NAT gateway is abnormal. | The operation failed because the EIP associated with this NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.SnatInMiddleStatus | Operation failed because the status of the SNAT entry of the specified NAT gateway is abnormal. | The operation failed because the SNAT entry of the specified NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.DnatInMiddleStatus | Operation failed because the status of the DNAT entry associated with the NAT gateway is abnormal. | The operation failed because the DNAT rule of the NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.NatGwRouteInMiddleStatus | Operation failed because the status of the route entry associated with the NAT gateway is abnormal. | The operation failed because the route entry associated with the NAT gateway is in an abnormal state. | |
| 400 | OperationFailed.VSwitchNotInVpc | The specified VSwitch and NAT gateway must be in the same VPC. | The vSwitch and the NAT gateway must belong to the same VPC. | |
| 400 | OperationFailed.EnhancedInventoryNotEnough | The enhanced NAT gateway inventory is insufficient in the specified zone. | The enhanced NAT gateway inventory in the current zone is insufficient. | |
| 400 | InvalidRouteEntryId.NotFound | The specified routeEntry does not exist. | The specified route entry does not exist. | |
| 400 | OperationFailed.QueryCenEntry | Operation is denied because getting CEN route entry has failed. | The query failed because Cloud Enterprise Network routes are temporarily unavailable. | |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to another VPN on the same network block. | A route that points to another VPN gateway already exists for the same CIDR block in the VPC route table. | |
| 400 | IllegalParam.LocalSubnet | The specified "LocalSubnet" (%s) is invalid. | The local CIDR block (%s) is invalid. | |
| 400 | IllegalParam.RemoteSubnet | The specified "RemoteSubnet" (%s) is invalid. | The peer CIDR block (%s) is invalid. | |
| 400 | MissingParam.SecondaryCidrBlockOrIpv6CidrBlock | Either SecondaryCidrBlock or Ipv6CidrBlock must be specified. | The required parameter secondary CIDR block or IPv6 CIDR block is missing. | |
| 400 | MissingParam.VpcId | You must specify VpcId. | The required parameter VpcId is missing. | |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | The VPC cannot be deleted because it still has DHCP options set instances that have not been deleted. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist. | The specified region does not exist. Check whether the parameter is correct. | |
| 400 | OperationFailed.AttachmentNotExist | The current VPC is not attahced to a DHCP options set. | The VPC is not associated with a DHCP options set instance. The replacement operation is not allowed. | |
| 400 | IncorrectStatus.VpcDhcpOptionsSet | The dhcpOptionsSet status of VPC does not support this operation. | The DHCP options set associated with the VPC is in a transitional state. The operation is not allowed. | |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | The DHCP options set instance ID does not match the VPC. Check whether the mapping between the DHCP options set and the VPC is correct. | |
| 400 | TaskConflict | The operation is too frequent. Please wait a moment and try again. | The operation is too frequent. Try again later. | |
| 400 | InvalidDhcpOptionsSetId.NotFound | The specified dhcpOptionsSetId does not exist. | The DHCP options set instance does not exist. Check whether the parameter is correct. | |
| 400 | IncorrectStatus.DhcpOptionsSet | The DhcpOptionsSet status does not support this operation. | The DHCP options set instance is in a transitional state. Wait until the instance status reaches a stable state before performing the operation. | |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | Shared resources do not support this operation. | |
| 400 | OperationFailed.AttachmentExist | The current VPC is already attached to a DHCP options set. | The VPC is already associated with a DHCP options set instance. You cannot associate another instance. | |
| 400 | QuotaExceeded.AttachVpcNumber | The maximum number of VPCs that can be attached to a DHCP options set is exceeded. | The number of VPCs that can be associated with a single DHCP options set instance has exceeded the quota. | |
| 400 | IllegalParam.DomainNameServers | The specified DomainNameServers is invalid. | The specified DomainNameServers parameter is invalid. Check whether the parameter is correct. | |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName parameter is invalid. Check whether the parameter is correct. | |
| 400 | IllegalParam.DhcpOptionsSetName | The specified DhcpOptionsSetName is invalid. | The specified DhcpOptionsSetName parameter is invalid. Check whether the parameter is correct. | |
| 400 | IllegalParam.DhcpOptionsSetDescription | The specified DhcpOptionsSetDescription is invalid. | The specified DhcpOptionsSetDescription parameter is invalid. Check whether the parameter is correct. | |
| 400 | OperationUnsupported.DhcpOptionsSet | The DHCP options set feature in this region is not supported. | The DHCP options set feature is not supported in the current region. | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | The DHCP options set is associated with a VPC and cannot be deleted. | |
| 400 | InvalidDomainNameServers.Malformed | The specified format of DomainNameServers is invalid. | The format of the specified DomainNameServers parameter is incorrect. Check whether the parameter is correct. | |
| 400 | QuotaExceeded.RegionDhcpOptionsSet | The quota of dhcpOptionsSet in the region is exceeded. | The number of DHCP options set instances that a single user can create has exceeded the quota. | |
| 400 | QuotaExceeded.DomainNameServers | The maximum number of domain name servers cannot exceed 4. | The number of configured DomainNameServers exceeds 4. | |
| 400 | IllegalParam.Mode | The specified value of the parameter Mode is invalid. | The value of the Mode parameter is invalid. | |
| 400 | QuotaExceeded.PolicyBasedRoute | The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s. | The number of policy-based routes has reached the upper limit. Currently there are %s routes, this operation will create %s routes, and the upper limit is %s routes. | |
| 400 | OperationUnsupported.CidrConflict | The specified CIDR block conflicts with an existing SNAT entry. | The CIDR block you specified conflicts with an existing SNAT entry. | |
| 403 | Forbidden.OperationRecoverNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | This user is not allowed to recover this Virtual Border Router. | |
| 403 | Forbidden.OperationDeleteNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | This user is not allowed to delete this Virtual Border Router. | |
| 403 | Forbidden.OperationTerminateNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | This user is not allowed to terminate this Virtual Border Router. | |
| 500 | VpnGateway.Configuring | The specified VPN gateway is being configured. | The VPN gateway is being configured. | |
| 0 | FUWU_BIZ_COMMODITY_VERIFY_FAIL | Your account status check has failed | The purchase failed. The failure may have occurred because you have not completed identity verification, your account balance is insufficient, or the number of instances exceeds the purchase limit. | |
| 0 | FUWU_BIZ_COMMODITY_VERIFY_FAIL | The module you purchased is invalid. | ||
| 0 | OrderFailed | Failed to create the order. | ||
| 0 | PAY.TAX_CALC_FAILED | Failed to calculate the tax amount. | ||
| 0 | PAY.CURRENCY_NOT_SUPPORTED | This account does not support the specified currency. | ||
| 0 | INVALID_COMPONENT | This instance type is not available for the account. | ||
| 0 | ARREARAGE | The specified account has an overdue payment. | ||
| 0 | PAY.INVALID_CREDIT_CARD | The specified credit card is invalid. | ||
| 0 | PAY.PAYMENT_PARAMETER_INVALID | The payment parameters are invalid. | ||
| 0 | IpInstanceId.BizStatusInvalid | The specified EIP is in a disabled state. | ||
| 0 | IpInstanceId.AlreadyInBandwidthPackage | The elastic IP address (EIP) instance already exists in the Internet Shared Bandwidth instance. | ||
| 0 | PAY.PAY_ORDER_FAILED | The order payment failed. Try again later. | ||
| 0 | DependencyViolation.Ips | The specified Internet Shared Bandwidth instance is already associated. | ||
| 0 | InvalidIpInstanceId.NotFound | The specified elastic IP address does not exist. | ||
| 0 | ORDER.PERIOD_INVALID | The specified purchase period is invalid. | ||
| 0 | QUANTITY_INVALID | The number of instances exceeds the limit. | ||
| 0 | NATGATEWAY_FINANCIALLOCKED | The specified NAT gateway has expired. | ||
| 0 | PRODUCT.INSTANCE_TYPE_NOT_SUPPORTED | This instance type is not available for the account. | ||
| 0 | PAY.COUPON_NOT_MEET_CONSUMPTION_RULE | The specified coupon is non-compliant and cannot be used. | ||
| 0 | PAY.INVALID_AMOUNT | The payment amount is invalid. | ||
| 0 | PRODUCT.NOT_AVAILABLE_IZ | The specified zone is not supported. | ||
| 0 | PAY.INSUFFICIENT_BALANCE | The account balance is insufficient. | ||
| 0 | DependencyViolation.EIPS | The specified NAT gateway is already associated with an elastic IP address. | ||
| 0 | PRICE.INQUIRY_FAILED | Failed to query the pricing information. | ||
| 0 | PAY.STORED_CARD_NOT_EXIST | The specified stored-value card does not exist. | ||
| 0 | BandwidthPackageId.InvalidBizStatus | The specified Internet Shared Bandwidth instance is in a financial lock state due to an overdue payment. | ||
| 0 | ORDER.QUOTA_EXCEEDED | The purchase limit has been exceeded. | ||
| 0 | RISK.RISK_CONTROL_REJECTION | The account has been disabled by the risk control system. | ||
| 0 | PRODUCT.INSUFFICIENT_STOCK | The request failed due to insufficient resources. | ||
| 0 | INSTANCE_HAS_INACTIVE_CHANGE | The specification change is being processed. | ||
| 0 | PAY.QUERY_QUOTA_BOOK_FAILED | Failed to query the quota ledger for the user. | ||
| 0 | ORDER.OPEND | The instance is already activated. | ||
| 0 | ORDER.NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | ||
| 0 | PRODUCT.INSTANCE_RELEASED | The specified instance has been released. | ||
| 0 | PAY.USER_DECLINED | The user refused to pay. | ||
| 0 | NOCARD | The user has not bindeda payment card. | ||
| 0 | PURCHASE.NO_VAILD_PURCHASE | The purchase is invalid. | ||
| 0 | InvalidParameter.Bandwidth | The specified bandwidth is invalid. | ||
| 0 | Forbidden.GlobalAccelerationInstanceChargeTypeIsPrepaid | A subscription Alibaba Cloud Global Accelerator (GA) instance cannot be released. | ||
| 0 | ORDER.ARREARAGE | The account balance is insufficient. | ||
| 0 | DependencyViolation.ip | The specified NAT gateway is already associated with an elastic IP address (EIP). | ||
| 0 | ORDER.NOT_ENOUGH_ACTIVITY_STOCK | The campaign inventory is insufficient. | ||
| 0 | PAY.CURRENCY_INCONSISTENCY | The currency does not match. | ||
| 0 | PURCHASE.PURCHASE_QUERY_FAILED | The specified purchase record does not exist. | ||
| 0 | EIP_BIND_NATGATEWAY | The specified EIP is already associated with a NAT gateway. | ||
| 0 | QuotaExceeded.GlobalAccelerationInstance | The number of Alibaba Cloud Global Accelerator (GA) instances exceeds the limit. | ||
| 0 | PRICE.PRICING_PLAN_NOT_FOUND | The specified pricing plan does not exist. | ||
| 0 | NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | ||
| 0 | COMMODITY.INVALID_COMPONENT | The specified instance component is invalid. Check whether the instance component is correct. | ||
| 0 | PAY.WITHHOLDING_AGREEMENT_ILLEGAL | The withholding tax agreement is invalid. | ||
| 0 | AUTH.RAM_AUTH_FAILED | Identity verification failed for the Resource Access Management (RAM) users. Failed to authenticate the RAM user. | ||
| 0 | EipOperation.TooFrequently | EIPs are being added to the Internet Shared Bandwidth instance too frequently. Try again later. | ||
| 0 | IpInstanceId.ChargeType.NotSupport | The specified EIP is a subscription instance. | ||
| 0 | PRICE.TAXING_ERROR | Tax calculation failed. | ||
| 0 | ORDER.ORDER_AMOUNT_ILLEGAL | The order amount is invalid. | ||
| 0 | ORDER.INSTANCE_HAS_INACTIVE_CHANGE | The specification change is being processed. | ||
| 0 | PAY.GET_PAY_URL_ERROR | An error occurred while obtaining the top-up URL. | ||
| 0 | PAY.COUPON_NOT_EXIST | The coupon does not exist. | ||
| 0 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | No matching instance pricing plan was found. Submit a ticket for consultation. | ||
| 0 | BandwidthPackage.QuotaExceeded | The number of bandwidth plans exceeds the limit. | ||
| 0 | IpInstanceId.NotBandwidthPackage | The specified EIP does not exist in the Internet Shared Bandwidth instance. | ||
| 0 | PRODUCT.INSTANCE_TYPE_NOT_EXIST | The specified instance type does not exist. | ||
| 0 | PRICE.INVALID_INQUIRY_PARAMETER | The specified pricing query parameter is invalid. | ||
| 0 | ORDER.BID_USER_ ORDER_FORBIDDEN | This account is not allowed to purchase spot instances. | ||
| 0 | ORDER.ACCOUNT_STATUS_ILLEGAL | The account status is invalid. | ||
| 0 | INSUFFICIENT_BALANCE | The account balance is insufficient. | ||
| 0 | ORDER.INST_HAS_UNPAID_ORDER | This account has unpaid orders. | ||
| 0 | IpInstanceId.QuotaExceeded | The number of IP addresses in this Internet Shared Bandwidth instance exceeds the limit. | ||
| 0 | PAY.ACCOUNT_BOOK_NOT_EXIST | The specified ledger does not exist. | ||
| 0 | PAY.AMOUNT_LIMIT_EXCEEDED | The amount exceeds the limit. | ||
| 0 | PAY.NO_CREDIT_CARD | No credit card has been added to this account. | ||
| 0 | EIP_NOT_SUPPORT_SNAT_POOL | The specified EIP cannot be added to the SNAT pool. | ||
| 0 | CreateOrderFailed | The order failed to be created. | ||
| 0 | PAY.REFUND_FAILED | The refund failed. | ||
| 0 | ORDER.INST_HAS_UNSETTLED_BILLS | This account has unpaid orders. | ||
| 400 | ORDER.QUANTITY_INVALID | User quota has exceeded the limit. | The number of EIPs that you own has reached the upper limit. Go to Quota Center to increase the EIP quota. | |
| 0 | ORDER.SYS_CONSTRAINT_INVALID | The order failed to pass the system constraint check. | ||
| 0 | QuotaExceeded.Bgp | bgp group count per vbr quota exceed. | The number of BGP groups for the Virtual Border Router has reached the quota. | |
| 0 | InvalidBackendServerId.NotInVPC | The specified BackendServerId is not in VPC. | The specified BackendServerId is not of the VPC type. | |
| 0 | MissingParameter.BandwidthPackage | only support one BandwidthPackage be created with NatGateway. | You must specify an Internet Shared Bandwidth instance. | |
| 0 | InvalidParameter | Specified value of "Bandwidth" is not valid. | The specified bandwidth is invalid. | |
| 400 | InvalidParameter | Specified value of InternetChargeType is not valid. | The value of the InternetChargeType parameter is invalid. | |
| 0 | InvalidFilterValue | The Value of the specified filter is invalid. | ||
| 0 | InvalidBindingStatus | The eip binding status invalid. | The bindng status of the EIP is incorrect. | |
| 0 | InvalidVlanId.Malformed | The specified VlanId is not valid. | The value of the VlanId parameter is invalid. | |
| 400 | InvalidDescription.Malformed | The specifid ?Description? is not valid. | The specified resource description format is invalid. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 400 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | The VPC cannot be deleted because it still contains cloud service instances that have not been deleted. | |
| 0 | InvalidRegion.NotSupport | The specified region does not support. | The specified RegionId does not support this operation. | |
| 0 | InvalidBackendServerRegionId.NotFound | The specified BackendServerRegionId is not found. | The specified BackendServerRegionId does not exist. | |
| 0 | InvalidName.Malformd | The attribute name is illeagl. | The specified name is in an invalid format. | |
| 400 | IncorrectStatus | HaVip can be deleted only when status is Available or InUse. | Failed to delete the high-availability virtual IP address (HaVip) because the HaVip status does not support this operation. | |
| 0 | QuotaExceeded.BgpNetwork | bgp network count per vbr quota exceed. | The number of Border Gateway Protocol (BGP) network entries for the vRouter has reached the quota. | |
| 0 | InvalidCircuitCode.Malformed | circuitCode is illegal. | The specified CircuitCode is invalid. | |
| 0 | InvalidSnatTableId.NotFound | Specified SNAT table does not exist. | The specified SNAT table does not exist. Check whether the input parameters are correct. | |
| 0 | IncorrectStatus | Vswtich status not stable. | The current status of the vSwitch is pending or modifying. Try again later. | |
| 0 | IncorrectStatus | This openeration would be allowed only when status of this RouterInterface is Idle/Inactive. | The operation cannot be performed. The operation is allowed only when the router interface is in the Idle or Inactive state. | |
| 400 | IncorrectStatus | HaVip can be deleted only when it is status is Available. | The HaVip cannot be deleted. The HaVip can be deleted only when it is in the Available state. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when it's status is Active. | The operation is allowed only when the router interface is in the Active state. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when it’s status is Idle. | The operation is allowed only when the router interface is in the Idle state. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when it's status is Inactive. | The operation is allowed only when the router interface is in the Inactive state. | |
| 400 | Forbidden.FinancialLocked | The instance is locked due to outstanding payments. | The instance has a financial lock due to overdue payment. Operations cannot be performed. | |
| 400 | QuotaExceeded.Bgp | bgp peer count per vbr quota exceed. | The number of BGP peers for the Virtual Border Router has reached the quota. | |
| 0 | Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You do not have the permission to operate on this resource. Apply for the permission and try again. | |
| 0 | Forbidden.OnlyOneConnection | The Specified routers have a connection already | The router already has a router interface connection. | |
| 0 | QuotaExceeded.freePconnPerAP | free physical connections count excceeded. | The Express Connect circuit quota has been exceeded. | |
| 0 | InvalidRouterType.ValueNotSupported | The specified RouterType is not valid | The specified router type is invalid. | |
| 404 | InvalidCustomerGatewayInstanceId.NotFound | The specified customer gateway instance id does not exist. | The specified customer gateway instance does not exist. Check whether the customer gateway instance ID is correct. | |
| 0 | InvalidIPAddress.AlreadyUsed | The specified IPAddress is already used by other resource. | The specified IP address is already in use. | |
| 0 | IncorrectGlobalAccelerationInstanceIdStatus | Current GlobalAccelerationInstance status does not support this operation. | The instance status of the specified Alibaba Cloud Global Accelerator (GA) does not support this operation. | |
| 0 | EIP_UNDERSTOCK | There are not enough eip in stock | The number of available EIPs in the inventory is insufficient. | |
| 0 | InvalidExternalIp.NotFound | Specified External Ip address does not found on the VRouter | The specified public IP address does not exist. | |
| 0 | Forbidden.VbrAttached | cannot terminate physical connection when virtual border routers are still attached. | The Express Connect circuit cannot be terminated because it still has associated Virtual Border Routers. | |
| 400 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackageId does not exist in our records. | The specified bandwidth package ID does not exist. | |
| 0 | InvalidVbrId.NotFound | The specified VirutalBorderRouter does not exist in our records. | The specified Virtual Border Router does not exist. Check whether the specified Virtual Border Router is correct. | |
| 0 | DependencyViolation.RouteInterface | Specified object has dependent route interface . | The specified vSwitch cannot be deleted because it is connected to a routing interface. | |
| 0 | InvalidVRouterName.Malformed | Specified virtual router name is not valid. | The specified router name format is invalid. | |
| 0 | RI_CREATE_ONE_LIMIT_BY_SYNC | Create ri only one limit by sync. | Concurrent creation of router interfaces is restricted. | |
| 0 | InvalidParams.NotNull | invalid peer asn cannot equals aliyun asn:45104 | The ASN number cannot be the same as the Alibaba Cloud ASN number. | |
| 0 | Forbidden.SnapshotNotFound | The specified Snapshot is not found | The specified snapshot does not exist. | |
| 0 | InvalidRouterInterfaceChargeType.Malformed | The prepaid routerinterface can not delete. | The subscription router interface cannot be deleted. | |
| 0 | LimitationExceed.InterfaceNumberOnRouter | Total number of RouterInterfaces on a Router exceeded. | The number of router interfaces has reached the quota limit. | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | The Internet Shared Bandwidth instance has SNAT or DNAT entries that have not been deleted. Delete the SNAT or DNAT entries before you proceed. | |
| 0 | TaskConflict.AssociateGlobalAccelerationInstance | Operate too frequent. | The operation is too frequent. | |
| 0 | Forbidden.BillsOutstanding | You cannot use this action because you have bills outstanding. | The operation cannot be performed because you have unsettled bills. | |
| 0 | MissingParameter | The input parameter OwnerId | A required parameter is not specified. | |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | Failed to delete a VPC because the VPC still contains vSwitches that have not been deleted. Delete the vSwitches in the VPC before you try to delete the VPC again. | |
| 0 | InvalidPhysicalConnectionId.NotFound | The PhysicalConnectionId provided does not exist in our records. | The Express Connect circuit does not exist. | |
| 0 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId does not belong to user. | The Express Connect circuit does not belong to your account. | |
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | The VPC does not exist. Check whether the specified VPC is correct. | |
| 400 | InvalidOppositeRouterType.ValueNotSupported | The specified OppositeRouterType is not valid. | The value of the OppositeRouterType parameter is invalid. | |
| 400 | QuotaExceeded | Forward entry quota exceeded in this route table. | The number of custom route entries in a single route table cannot exceed 200. You can request a quota increase on the Quota Management page. | |
| 0 | IncorrectInstanceStatus | ECS instance can be operated by this action only when it's status is Running or Stopped. | This operation can be performed only when the ECS instance is in the Running or Stopped state. | |
| 400 | InvalidCirdrBlock.MaskLength | Specified CIDR block is not valid . | The format of the specified CIDR block is invalid. | |
| 0 | ResourceNotAssociated | The HaVip and ECS instance are not associated. | The HaVip is not associated with the ECS instance. | |
| 0 | Forbidden.BillsOutstanding | You cannot create more RouterInterface because you have bills outstanding. | The router interface cannot be created because you have unsettled bills. | |
| 404 | InvalidVpnConnectionInstanceId.NotFound | The specified vpn connection instance id does not exist. | The specified VPN connection does not exist. Check whether the VPN connection ID is correct. | |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | The specified RegionId does not exist. Check whether this parameter is correct. | |
| 0 | InvalidRegionId.NotFound | The specified region ID is invalid. | ||
| 0 | InvalidRegionId.NotFound | The parameter wrong | The parameter value is invalid. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist in our records. | The specified RegionId does not exist. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId is not found. | The specified RegionId does not exist. Check whether this product is available in the specified region. | |
| 0 | InvalidRegionId.NotFound | Specified value of "regionId" is not supported. | The specified RegionId does not exist. Check whether this product is available in the specified region. | |
| 0 | InvalidRegionId.NotFound | The specified region not found. | The specified RegionId does not exist. Check whether this product is available in the specified region. | |
| 0 | InvalidName | The name is not valid | The specified name is in an invalid format. | |
| 0 | InvalidVpcId.NotFound | Specified VPC does not exist. | The VPC does not exist. | |
| 0 | ForbiddenAction | The user dose not supported this action. | You are not authorized to perform this operation. | |
| 0 | EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | The number of associated Virtual Border Routers has reached the quota limit. | |
| 0 | InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | The specified end time is invalid. | |
| 0 | DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | The HaVip cannot be deleted because it is associated with an EIP. | |
| 0 | InvalidAccessPoint.NotExist | The accessPoint not exit | The specified access point does not exist. | |
| 0 | InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our record. | The specified router interface does not exist. Check whether the specified router interface is correct. | |
| 0 | Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to specify the CircuitCode parameter. | The CircuitCode parameter is not allowed. | |
| 0 | InvalidStartTime.Malformed | Specified start time is malformed. | The specified start time is invalid. | |
| 0 | Forbedden.NotSupportRAM | This action does not support accessed by RAM mode. | This operation is not supported for Resource Access Management (RAM) users. | |
| 0 | InsufficientEipCapacity | Insufficient EIP capacity to fulfill your request. | The EIP quota is insufficient. | |
| 400 | InternalError | The request processing has failed due to some unknown error. | The request processing failed due to an unknown error. | |
| 404 | InvalidFilterKey.ValueNotSupported | Specified filter key is not supported: Filter.X.key | The specified filter key is not supported: Filter.X.key. | |
| 0 | InvalidParameter.Description.Malformed | The specified Description is not valid. | The specified description is invalid. | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | The HaVip instance quota has been exceeded. | |
| 0 | InvalidType.Malformd | The Type provided was invalid. | The value of the Type parameter is invalid. | |
| 400 | InvalidParams.NotFound | vpc instance not found | The VPC does not exist. Check whether the specified VPC is correct. | |
| 0 | InvalidRemovedIpAddresses.NotFound | Some of remove ip is not natPublicIp. | The IP addresses to be removed contain IP addresses that are not public IP addresses of the NAT gateway. | |
| 0 | Forbindden | The specified Instance already bind eip | The instance is already attached to an EIP. Disassociate the ECS instance from the EIP before adding the port forwarding rules. | |
| 400 | InvalidParams.AlreadyExists | bgp network already exists | The Border Gateway Protocol (BGP) networks already exist. | |
| 0 | InvalidInternalPort.Malformed | The specified InternalPort is not a valid port. | The private port is invalid. | |
| 0 | InvalidParams.NotNull | parameter must not null. | The parameter cannot be empty. | |
| 0 | Forbidden.LocalGatewayIpNotAllowedByCaller | The caller is not allowed to specify the LocalGatewayIp parameter. | The LocalGatewayIp parameter is not allowed. | |
| 0 | InvalidCidrBlock | Specified CIDR block is already exists. | VSwitch CIDR block of the vSwitch overlaps with vSwitch CIDR block of another vSwitch or with the destination CIDR block of an existing custom route. Use a CIDR block that is not in use. | |
| 0 | Forbidden.InternalIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The private IP address is not within the CIDR block of the VPC. | |
| 0 | InvalidCircuitCode.Malformed | The specified CircuitCode is not valid. | The specified CircuitCode is invalid. | |
| 0 | NATGW_MODIFY_SPEC_SAME | The specified Spec is same with now. | The specified specification is the same as the current specification. | |
| 0 | InvalidParams.PeerIpAddressInUse | peer ip address in use | The peer IP address is already in use. | |
| 0 | InvalidVlanId.Used | The specified VlanId has been used. | The VLAN is already in use. | |
| 0 | INVALID_WEIGHT_PARAM | Specified value of weight invalid | The weight is invalid. | |
| 0 | InternalError | The request processing has failed due to some unknown error | The request processing failed due to an unknown error. | |
| 0 | UnknownError | The request processing has failed due to some unknown error. | An unknown error occurred. Retry the operation. If the error persists, submit a ticket. | |
| 0 | IncorrectInstanceStatus | Current instance status does not support this operation. | The current status of the instance does not support this operation. | |
| 0 | IncorrectInstanceStatus | ECS instance can be operated by this action only when it’s status is Running or Stopped. | This operation can be performed only when the ECS instance is in the Running or Stopped state. | |
| 0 | IncorrectInstanceStatus | The current status of the resource does not support this operation. | The current status of the resource does not support this operation. | |
| 0 | InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | The next hop type and the next hop list cannot both be empty. | |
| 0 | IncorrectInstanceStatus | The current status of instance does not support this operation. | The current status of the instance does not support this operation. | |
| 0 | ForbiddenRelease | Forbidden to release a prepaid instance within validity period | A subscription instance cannot be released during the contract period. | |
| 0 | OperationFailed.VlanIdAlreadyInUse | The specifed vlanId has been used. | The VLAN is already in use. | |
| 400 | QuotaExceeded.VSwitch | Virtual switch quota exceeded. | The number of vSwitches has reached the quota limit. Reduce the number of vSwitches and try again. | |
| 0 | CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | The number of high-availability virtual IP addresses (HAVIPs) has exceeded the quota for the specified VPC. | |
| 0 | OperationDenied | The user cannot allow to create natgw | System-generated route entries cannot be deleted. | |
| 0 | InvalidPhysicalConnectionId.NotEnabled | The specified PhysicalConnectionId is not in Enabled state. | The Express Connect circuit is not in a normal state. Check the Express Connect circuit before creating a new one. | |
| 0 | InvalidRedundantPhysicalConnectionStatus | invalid redundant physical connection status. | The status of the redundant Express Connect circuit is invalid. | |
| 0 | InvalidVpcName.Malformed | Specified VPC name is not valid. | The name format of the virtual private cloud (VPC) is invalid. Correct the VPC name format and try again. | |
| 0 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif | The Virtual Border Router (VBR) must have at least one sub-interface before you can create a BGP configuration. | |
| 0 | InvalidStatus.CannotOperate | invalid status cannot operate | The status is invalid. The operation cannot be performed. | |
| 0 | InvalidBandwidth.ValueNotSupported | The specified value of Bandwidth not supported. | The specified peak bandwidth is not supported. | |
| 0 | InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | The value of the Period parameter is invalid. | |
| 0 | ParameterMismatch.Role-Spec | The specified Spec and Role mismatch. | The router interface specification does not match the role. | |
| 0 | DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | The NAT gateway still has NAT service plans that have not been deleted. Delete all NAT service plans under the NAT gateway and try again. | |
| 400 | InvalidIpAddress.AlreadyExist | Specified IpAddress is already exist. | The IP address already exists. The same user cannot have duplicate IP addresses in the same region. | |
| 0 | InsufficientBalance | Your account does not have enough balance. | The account balance is insufficient. Top up your account before performing this operation. | |
| 0 | InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | Both the next hop type and the next hop list are empty. | |
| 0 | InvalidVbrId.NotFound | The specified VirutalBorderRouter or PhysicalConnection does not exist in our records. | The Virtual Border Router or Express Connect circuit does not exist. | |
| 0 | InvalidVbrId.NotFound | The specified VirutalBorderRouter is not found. | The specified Virtual Border Router does not exist. Check whether the specified Virtual Border Router is correct. | |
| 0 | InvalidAccessPointId.NotFound | The AccessPointId provided does not exist in our records. | The specified AccessPointId does not exist. | |
| 0 | PHYSICAL_NOT_ALLOW_ASSOCIATE_VBR | The specified operation not allow. | The operation cannot be performed because the Express Connect circuit has associated Virtual Border Routers. | |
| 0 | IncorretSnatEntryStatus | The Specified SnatEntry is not stable status | The SNAT entry is in an unstable state. | |
| 0 | DependencyViolation | Some route entry status blocked this operation. | The operation cannot be performed because routes in the current route table are in the pending or modifying state. | |
| 0 | InvalidForwardTableId.NotFound | Specified forwardTableId does not exist | The specified DNAT table does not exist. Check whether the input parameters are correct. | |
| 0 | RouterEntryConflict.Duplicated | A route entry already exists | The route already exists. | |
| 0 | Forbidden.UnassociateMaster | Unassociating a master instance is not allowed unless the parameter Force is True. | You cannot disassociate the master instance when force unbinding is not enabled. | |
| 0 | InvalidBackendServerId.NotFound | The specified BackendServerId is not found. | The backend server instance does not exist. Check whether the backend server instance is correct. | |
| 0 | InvalidAccessPoint.NotMatch | The accessPoint id is not matched | The access point ID is invalid. | |
| 0 | InvalidVbrOwnerId.NotFound | The specified VbrOwnerId is not valid. | The value of the VbrOwnerId parameter is invalid. | |
| 0 | MissingParameter | Required parameters are missing. Check whether all required parameters are specified before you perform the operation. | ||
| 0 | MissingParameter | Miss mandatory parameter. | Required parameters are missing. Check whether all required parameters are specified before you perform the operation. | |
| 0 | MissingParameter | LocalGatewayIp | The LocalGatewayIp parameter must be specified. | |
| 0 | MissingParameter | The input parameter 'PeeringSubnetMask' that is mandatory for processing this request is not supplied. | The PeeringSubnetMask parameter must be specified. | |
| 0 | MissingParameter | The input parameter 'PeerGatewayIp' that is mandatory for processing this request is not supplied. | The PeerGatewayIp parameter must be specified. | |
| 0 | MissingParameter | The input parameter 'LocalGatewayIp' that is mandatory for processing this request is not supplied. | The LocalGatewayIp parameter must be specified. | |
| 0 | MissingParameter | The input parameter 'VlanId' that is mandatory for processing this request is not supplied. | The VlanId parameter must be specified. | |
| 0 | MissingParameter | The input parameter 'PhysicalConnectionId' that is mandatory for processing this request is not supplied. | The PhysicalConnectionId parameter must be specified. | |
| 0 | MissingParameter | The input parameter is mandatory for processing this request is not supplied. | Required parameters are missing. Check whether all required parameters are specified before you perform the operation. | |
| 0 | InvalidStatus | invalid physical connection status. | The Express Connect circuit is in an invalid state. | |
| 0 | InvalidZoneId.NotFound | Can not find ZoneId for allocated ip. | The zone of the specified IP address is invalid. | |
| 0 | OperationDenied.TooManyDataQueried | Specified operation is denied as too many data to return. | A single query returned too much data. | |
| 0 | InvalidZoneId.NotFound | Specified zone does not exist. | The zone ID is invalid. | |
| 0 | ROUTER_INTERFACE_REFERED_BY_ROUTEENTRY | The specified VlanInterface has been used by routeEntry. | The VLAN interface is already used in a route. | |
| 0 | PARAMETER_MUST_NOT_NULL | The specified physical connection id or vbrId must not be null. | The vbrId and physicalconnectionId parameters must be specified. | |
| 0 | Forbidden.RiskControl | This operation is forbidden by Aliyun RiskControl system. | The operation is prohibited by the risk governance system. | |
| 0 | DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | The IP address is referenced by port forwarding rules. Delete the corresponding rules before you perform this operation. | |
| 0 | InvalidForwardTableId.NotFound | Specified forward table does not exist. | The specified DNAT table does not exist. Check whether the input parameters are correct. | |
| 0 | InvalidUserCidr.Quota | Specified UserCidr number is greater than 3. | The user CIDR block has reached the quota limit. | |
| 0 | Forbidden.DestnationIpOutOfVpcCIDR | The specified Destination Ip is Out of VPC CIDR. | The specified private IP address is not within the CIDR block of the VPC. Specify a private IP address within the CIDR block of the VPC. | |
| 0 | InvalidRouteEntry.Duplicate | The route entry already exist. | The specified route already exists. | |
| 0 | InvalidRouteEntry.NotFound | Route entry not exists. | The route does not exist. Check whether the route is correct. | |
| 0 | ParamsInvalid | The request parameters are invalid. | ||
| 0 | Forbidden.NotAllowedInState | The request does not allow in this state. | The request cannot be processed in the current state. | |
| 0 | InvalidPeerIpAddress | multi pconn peer ip can not be null. | The IP addresses for multiple Express Connect circuits cannot be empty. | |
| 400 | QuotaExceeded.BandwidthPackageIps | The specified ipCount exceeded quota. | The number of IP addresses has reached the upper limit. You can request a quota increase on the Quota Center page. | |
| 400 | QuotaExceeded.Vpc | VPC quota exceeded. | The number of VPCs under your account has reached the quota limit. | |
| 0 | InvalidInstanceOwner.Error | The router instance owener error. | The vRouter does not belong to your account. | |
| 0 | InvalidStatus.NotAllowed | Invalid virtual border router status. | The current state of the Virtual Border Router does not support this operation. | |
| 0 | InvalidVpnConnection.AlreadyExists | Vpn connection already exists. | The VPN connection already exists. You do not need to add it again. | |
| 0 | Forbidden.AssociateToVBR | The physical connection still associate to VBR. | The Express Connect circuit is already associated with a Virtual Border Router. | |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | The vSwitch is in the pending state and cannot be deleted. | |
| 0 | InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | The route entry does not match the local video gateway VIP of the router interface. | |
| 0 | InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other entry. | VSwitch CIDR block of the vSwitch overlaps with vSwitch CIDR block of another vSwitch or with the destination CIDR block of an existing custom route. Use a CIDR block that is not in use. | |
| 0 | QuotaExceeded.Nqa | nqa count per vbr quota exceed. | The number of NQA instances exceeds the VBR quota. | |
| 0 | InvalidDescription.Malformed | The specifid "Description" is not valid. | The specified resource description format is invalid. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | The specified Name parameter is invalid. | |
| 0 | InvalidDescription.Malformed | The specifid ‘Description’ is not valid. | The description format is invalid. | |
| 400 | InvalidDescription.Malformed | The Description is illeagl. | The specified resource description format is invalid. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | |
| 0 | InvalidParameter | The specified parameter is not valid | The specified parameter value is invalid. | |
| 0 | InvalidParameter | Specified value of "Period" is not valid | The value of the Period parameter is invalid. | |
| 0 | InvalidParameter | The specified parameter is not valid. | The specified parameter value is invalid. | |
| 0 | InvalidParameter | Specified UserCidr invalid format. | The format of the user-side CIDR block is invalid. | |
| 0 | InvalidParameter | Specified UserCidr Subnet mask is not valid . | The subnet mask of the user-side CIDR block is invalid. | |
| 0 | InvalidParameter | Specified value of "Bandwidth" is not supported. | The specified bandwidth is invalid. | |
| 0 | InvalidParameter | Specified CIDR block is not valid in VPC. | The CIDR block is not within the VPC CIDR block. | |
| 0 | InvalidParameter | Specified CIDR block is not valid | The CIDR block is invalid. | |
| 0 | QuotaExceeded.vbrPerpConn | Virtual boarder router per PhysicalConnection quota exceed. | The number of Virtual Border Routers on the Express Connect circuit exceeds the quota. Reduce the number of Virtual Border Routers on the Express Connect circuit and try again. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId is not found. | The specified Express Connect circuit ID does not exist. | |
| 400 | NATGW_NOT_EXIST | The specified NAT gateway does not exist. | The NAT gateway does not exist. | |
| 0 | InvalidGlobalAccelerationInstanceId.NotFound | The specified GlobalAccelerationInstanceId is not found. | The Alibaba Cloud Global Accelerator (GA) instance does not exist. | |
| 409 | OperationConflict | Request was denied due to conflict with a previos request. | A request conflict occurred. Try again later. | |
| 0 | InvalidLockReason.NotFound | The specified LockReason is not found | The lock reason was not found. | |
| 0 | BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | The bandwidth plan is locked due to overdue payment. | |
| 0 | Forbidden.MultiVlanRi | Multiple vlan router interfaces are found. | Multiple VLAN router interfaces exist. | |
| 0 | InvalidForwardEntryId.NotFound | Specified forward entry ID does not exist | The DNAT entry does not exist. | |
| 0 | InvalidName.Malformed | The specified ?Name? is not valid. | The specified name is in an invalid format. | |
| 0 | InvalidSnatEntryId.NotFound | Specified Snat entry ID does not exist | The specified SNAT entry does not exist. Check whether the SNAT entry is correct. | |
| 0 | Forbidden.VlanIdNotAllowedByCaller | The caller is not allowed to specify the VlanId. | Specifying a VLAN ID is not allowed. | |
| 0 | Forbidden.SourceVSwitchId.Duplicated | The specified SourceCIDRis duplicated. | The vSwitch already has an SNAT rule configured. Do not configure it again. | |
| 0 | InvalidVPCStatus | vpc incorrect status. | The VPC is in an invalid state. Check whether the VPC state is correct. | |
| 0 | InvalidRouteEntry | Specified routeEntry not exist. | The route entry does not exist. | |
| 0 | InvalidSnatIp.Malformed | The specified SnatIp is not a valid IP address. | The public IP address is invalid. | |
| 0 | InvalidStatus.StatusNotEnabled | The physical connection status is invalid. | The Express Connect circuit is in a state that does not support this operation. Check the state of the Express Connect circuit. | |
| 0 | Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | An error occurred while checking the route entry quota. | |
| 0 | UnsupportedParameter | The parameter is invalid. | ||
| 0 | IncorrectVpcStatus | Current VPC status does not support this operation. | The current state of the VPC does not support this operation. | |
| 0 | LinkRole.NotSupport | This linkrole is not supported | This link is not supported. | |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | The VPC cannot be deleted because custom routes exist in the VPC. | |
| 0 | Throttling | Request was denied due to request throttling. | Your traffic has exceeded the limit for this time period. If this does not meet your business requirements, submit a ticket to request an increase. | |
| 0 | InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | The Express Connect circuit is in an invalid state. | |
| 404 | InvalidAllocationId.NotFound | Specified allocation ID is not found | The specified public IP address does not exist. Check whether the parameters you entered are correct. | |
| 0 | InvalidAllocationId.NotFound | Specified allocation ID is not found.. | The specified public IP address does not exist. Check whether the public IP address you entered is correct. | |
| 0 | InvalidRedundantPhysicalConnection | redundant physical connection doesn't belong to current user. | The redundant Express Connect circuit does not belong to your account. | |
| 0 | Forbidden.OnlyOneConnection | Cannot connect concurrently between same routers | You cannot initiate a connection on the same vRouter. | |
| 0 | InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | The route quota rule does not exist. | |
| 0 | DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | The high-availability virtual IP address (HaVip) that is used as the next hop of a route cannot be deleted. Delete the route that points to this HaVip first. | |
| 400 | PHYSICAL_NOT_ASSOCIATE_TO_VBR | The specified PhysicalConnection have not associate to the vbr. | No Virtual Border Router has been created for this Express Connect circuit. | |
| 400 | InvalidUserCidr.Malformed | Specified UserCidr overlapping in of 100.64.0.0/10. | The specified UserCidr overlaps with 100.64.0.0/10. | |
| 0 | InvalidOperation.RouterInterfaceNotDeleted | The specified VirutalBorderRouter still has routerInterface. | The Virtual Border Router still has associated router interfaces. | |
| 0 | IncorretRouteEntryStatus | A route or vSwitch in a route table of the same VPC is in a transitional state (being added, modified, or deleted). You cannot create a route at this time. | ||
| 0 | InvalidPhysicalConnectionId.NotMatched | instance id not matched. | The instance ID does not match. | |
| 400 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | ClassicLink is already enabled for this VPC. You do not need to enable ClassicLink again. | |
| 0 | ReserveIpFail | Reserve eip failed. | Failed to reserve the EIP. | |
| 0 | VpnGateway.Configuring | The specified service is configuring. | The service is being configured. Try again later. | |
| 0 | InvalidAccessPoint.ValueNotAllowed | The non-vbr opposite router interface cannot have opposite access point configured. | You cannot configure an access point for a router interface that does not belong to a Virtual Border Router. | |
| 0 | InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist in our records. | The specified NatGatewayId does not exist. Check whether the NatGatewayId you entered is correct. | |
| 0 | FUWU_BIZ_COMMODITY_VERIFY_FAIL | 你购买的模块非法 | The module you purchased is invalid. | |
| 0 | InvalidPeerGatewayIp.Malformed | The specified PeerGatewayIp is not valid. | The value of the PeerGatewayIp parameter is invalid. | |
| 0 | InvalidAllocationId.NotFound | Specified allocation id is not found. | The specified public IP address does not exist. Check whether the public IP address you entered is correct. | |
| 0 | BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | An operation conflict occurred on the Internet Shared Bandwidth instance. | |
| 0 | MCMS_VBR_EMPTY | Specified region have no vbr. | No Virtual Border Router exists in this region. Check whether the region is correct and try again with a different region. | |
| 0 | InvalidPeerAsn.Malformed | invalid peer asn cannot equals aliyun asn:45104 | The ASN number cannot be the same as the Alibaba Cloud ASN number. | |
| 0 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalide | The parameters for editing the router interface are invalid. | |
| 0 | Forbidden.VBRExists | vbr owner's vbr still exists. | The Virtual Border Router still exists. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | Failed to delete a VPC because it still contains security groups that have not been deleted. Delete the security groups in this VPC first, and then delete the VPC. | |
| 0 | Forbidden.Already.Bounded | The specified instance already bounded | The instance is already associated. Do not associate it again. | |
| 0 | CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | The number of Alibaba Cloud Global Accelerator (GA) instances that can be attached to a backend server instance has reached the upper limit. | |
| 0 | Forbidden.ImageNotFound | The specified Image is not found | The specified image does not exist. | |
| 0 | InvalidZoneId.NotFound | Specified value of ZoneId is not exists. | The specified zone does not exist. | |
| 0 | QuotaExceeded.BandwidthPackageCountOnNatGateway | BandwidthPackage count limit on one NatGateway exceeded. | The maximum number of Internet Shared Bandwidth instances has been reached. A maximum of four Internet Shared Bandwidth instances can be created for each Internet NAT gateway. | |
| 0 | InvalidExternalPort.Malformed | The specified ExternalPort is not a valid port. | The specified public port is invalid. | |
| 0 | IncorretForwardEntryStatus | The Specified forwardEntry is not exist | The DNAT entry does not exist. | |
| 0 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId is wrong. Maybe the RouterInterface or Router does not exist | The value of OppositeRouterInterface is incorrect based on the settings of OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId. The router or router interface may not exist. | |
| 0 | IncorretForwardEntryStatus | The Specified forwardEntry is not stable status | The DNAT entry is in an unstable state. | |
| 0 | InvalidParameter.Name.Malformed | The specified Name is not valid. | The specified name is invalid. Enter a name in the correct format. | |
| 0 | Forbbiden | Specified RouteEntry cannot allowed delete by openApi. | You are not allowed to delete this route by calling an API operation. | |
| 0 | Forbbiden | Active custom route in vpc. | You need to add a custom route entry in the VPC. | |
| 0 | Forbbiden | The Router instance owener error | The router does not belong to your account. | |
| 0 | Forbbiden | The eip instance owener error | The EIP does not belong to the current caller. Check whether you have permission to call this EIP. | |
| 0 | InvalidEndTime.Malformed | Specified end time is malformed. | The specified end time is invalid. | |
| 0 | InvalidParameter.BandwidthPackage.n.ISP.ValueNotSupport | The specified ISP of BandwidthPackage is not valid. | The ISP of the Internet Shared Bandwidth instance is invalid. | |
| 0 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach it?s limit. | The number of SNAT entries has reached the quota. | |
| 0 | InvalidAssociation.Duplicated | Specified instance already is associated. | The instance is already attached to an EIP or an Alibaba Cloud Global Accelerator (GA) instance and cannot be attached to another one. To replace the attached EIP or Alibaba Cloud Global Accelerator (GA) instance, detach the current one first. | |
| 0 | InvalidIpCount.ValueNotSupported | Can not remove all ips of the bandwidthPackage. | You cannot remove all IP addresses from the bandwidth package. | |
| 0 | InvalidRegionPair.NotReachable | The specified OppositeRegion is not reachable by ExpressConnect from that region specified by "RegionId" | The specified region ID is invalid. | |
| 0 | Forbidden.RegionNotFound | Specified region is not found during access authentication. | The specified region does not exist. Check whether the region is correct. | |
| 400 | InvalidVSwitchName.Malformed | Specified virtual switch name is not valid. | The vSwitch name format is invalid. Check the vSwitch name format. | |
| 0 | AllocateIpFailed | Alloc bandwidthPackage ips failed | Failed to assign a public IP address to the Internet Shared Bandwidth instance. | |
| 0 | IncorretSnatEntryStatus | Some Snat entry status blocked this operation.. | The operation cannot be performed. SNAT entries in the SNAT table are in the Pending or Modifying state. | |
| 0 | InvalidPortType.Malformd | The PortType provided was invalid. | The port type is invalid. | |
| 0 | InvalidVRouterId.NotFound | Specified virtual router does not exist. | The specified vRouter does not exist. Check whether the vRouter is correct. | |
| 0 | InvalidGlobalAccelerationInstanceDescription.Malformed | The specified Description is not valid. | The description format is invalid. | |
| 0 | InvalidRouterInterface | invalid router interface. | The specified router interface does not exist. | |
| 0 | InvalidNextHop.NotFound | Specified next hop does not exist. | The specified next hop address does not exist. | |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | Failed to delete a vSwitch because it has associated high-availability virtual IP addresses (HaVips). | |
| 0 | Forbidden.OperationNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | Recovering the Virtual Border Router is not allowed. | |
| 0 | Forbidden.OperationNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | Terminating the Virtual Border Router is not allowed. | |
| 0 | InvalidIpCount.ValueNotSupported | The specified value of IpCount not supported. | The value of the IpCount parameter is invalid. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it’s status is Available or InUse. | This operation can be performed only when the HaVip is in the Available or InUse state. | |
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | The operation cannot be performed because the HaVip is in the Available or InUse state. | |
| 0 | RealNameAuthenticationError | Your account has not passed the real-name authentication yet. | Your account has not completed real-name verification. Complete real-name verification for your account before performing this operation. | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | Creating a VBR for users from other sites is not allowed. | |
| 0 | InvalidHaVip.NotFound | The specified HaVip does not exist. | The specified HaVip does not exist. | |
| 0 | Forbidden.NotInRouterInterfaceCreateWhitelist | Not in router interface create whitelist. | The request is not in the whitelist of the router interface. | |
| 0 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is InUse. | This operation can be performed only when the HaVip is in the InUse state. | |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | You must specify 2 to 4 router interfaces as next hops. | |
| 0 | IncorrectRouteEntryStatus | Some route entry status blocked this operation. | The operation cannot be performed because routes in the current route table are in the pending or modifying state. | |
| 0 | Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to modify. | Modifying the CircuitCode parameter is not allowed. | |
| 400 | InvalidPeeringSubnetMask.Malformed | The specified PeeringSubnetMask is not valid. | The specified PeeringSubnetMask is invalid. Check whether this parameter is correct. | |
| 400 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The vSwitch description format is invalid. | |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | Equal-cost multi-path (ECMP) routing requires 2 to 4 router interfaces as next hops. | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | The NAT gateway has dependent IPv6 SNAT entries. Delete these entries before disabling IPv6. | |
| 0 | Forbidden.DestnationIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The specified private IP address is not within the CIDR block of the VPC. Specify a private IP address within the CIDR block of the VPC. | |
| 0 | InvalidBgpDescription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | The router interface cannot be deleted because it is referenced by a route entry as a next hop. Delete the route entry that points to this router interface first. | |
| 0 | LastTokenProcessing | The last token request is processing. | The previous token request is being processed. Try again later. | |
| 400 | InvalidAccessPointId.NotEnabled | Invalid access point status. | The current access point does not have sufficient resources to support the connection. Contact your account manager. | |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | The ECS instance already has port forwarding rules (DNAT). Delete the corresponding port forwarding rules before performing this operation. | |
| 0 | Forbbiden.ModifyIdAndType | Opposite is VBR | The peer end is a Virtual Border Router. | |
| 0 | Forbbiden.SubUser | The specified action is not available for you. | You do not have the permission to perform this operation. | |
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | Possible causes: 1. You are not in the whitelist for the 10.0.0.0/8 CIDR block and cannot use this CIDR block. 2. The destination CIDR block of the custom route cannot be a subset of the CIDR block of any vSwitch in the same VPC. 3. Because 100.64.0.0/10 is reserved for cloud services, you cannot add this CIDR block to point to an on-premises data center. 4. In addition to 100.64.0.0/10, specific CIDR blocks such as 100.64.0.0/11 and 100.96.0.0/11 cannot be used for on-premises data centers. | |
| 0 | InvalidRedundantPhysicalConnectionId.NotFound | The RedundantPhysicalConnectionId does not found. | The redundant Express Connect circuit does not exist. | |
| 0 | InvalidIp.NotInNatgw | The specified Ip not belong to natgateway. | The IP address does not belong to the specified Internet NAT gateway. | |
| 0 | IdempotentParameterMismatch | Request uses a client token in a previous request but is not identical to that request. | The client token used in the request is inconsistent. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | Failed to delete a VPC because it still contains security groups that have not been deleted. Delete the security groups in the VPC first, and then delete the VPC. | |
| 0 | BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | You cannot perform operations on this EIP. | |
| 0 | InvalidParam.NotFound | Parameter must not be null | The parameter cannot be empty. | |
| 0 | InvalidServiceLocation.ValueNotSupported | The specified ServiceLocation is not supported. | The specified service area is not supported. | |
| 0 | ResourceNotAvailable.Vpc | Resource you requested is not available in this region or zone. | The requested resource is not available in the specified region or zone. | |
| 0 | DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | The IP address is referenced by an SNAT rule. Delete the corresponding rule before you perform this operation. | |
| 0 | IncorrectEipStatus | Current elastic IP status does not support this operation. | The current status of the specified EIP does not support this operation. | |
| 400 | InvalidVpnGatewayInstanceId.NotFound | The specified vpn gateway instance id does not exist. | The specified VPN gateway does not exist. Check whether the VPN gateway is correct. | |
| 0 | Forbidden.IpUsedInForwardTable | The specified SnatIp already used in forward table | The public IP address is already used by a DNAT rule. Use a different public IP address or delete the DNAT rule associated with the current public IP address. | |
| 0 | InvalidVRouterDiscription.Malformed | Specified virtual router description is not valid. | The description format of the vRouter is invalid. | |
| 0 | Forbidden.ExternalIp.UsedInSnatTable | The specified ExternalIp is already used in SnatTable | The public IP address is already used by an SNAT rule. Use a different public IP address or delete the SNAT rule associated with the current public IP address. | |
| 0 | InvalidBandwidth | invalid physical connection banwidth. | The bandwidth of the Express Connect circuit is invalid. | |
| 0 | QuotaExceeded | Route entry quota exceeded in this route table. | The route quota has been exceeded. | |
| 0 | InvalidNextHopType | Specified parameter "NextHopType" is not valid | The next hop type is invalid. | |
| 0 | InvalidNatGatewayId.NotFound | The NatGatewayId not exist. | The specified NatGatewayId does not exist. Check whether the NatGatewayId you entered is correct. | |
| 400 | InvalidIp.NotSameSubnet | Local gateway ip and peer gateway ip are not in the same subnet. | The local gateway IP address and the peer gateway IP address are not in the same subnet. | |
| 0 | InvalidIpAddress.WrongFormat | Specified IpAddress is invalid. | The IP address is invalid. | |
| 0 | ForwardEntry.Duplicated | The specified ExternalIp | The specified IP address already exists. Specify a different IP address. | |
| 400 | Forbidden.VpcNotFound | Specified VPC can not found. | The specified VPC does not exist. Check whether the VPC is correct. | |
| 400 | Forbidden.SourceVSwitchId.IncludeHaVip | There is some HaVips under specified VSwitch | The vSwitch has associated high-availability virtual IP addresses (HaVips). | |
| 0 | Forbidden.InstanceNotFound | The specified Instance is not found | The specified instance does not exist. Check whether the instance is correct. | |
| 0 | InvalidBgpGroup | bgp group not exists | The specified BGP group does not exist. | |
| 0 | InvalidSnatEntryId.NotFound | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. Check whether the SNAT entry is correct. | |
| 0 | Invalid.natgwNotExist | The specified natgateway not exist. | The specified NAT gateway does not exist. | |
| 0 | Forbidden.SecurityGroupNotFound | The specified SecurityGroup is not found | The specified security group does not exist. | |
| 0 | InvalidChargeType.ValueNotSupported | The specified ChargeType is not supported. | The Billable methods is not supported. Select a different billing method. | |
| 0 | ResourceNotAvailable | Resource you requested is not available in this region or zone. | The current region or zone does not support creating vSwitches. | |
| 0 | InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | The peer router type of the next-hop router interface must be a Virtual Border Router. | |
| 0 | ZONE_NO_AVAILABLE_IP | The Zone have no available ip. | No IP addresses are available in the specified zone. | |
| 0 | Forbidden.ChargeTypeIsPrepaid | It’s forbidden to change prepaid EIP’s bandwidth by API. It can be changed on Aliyun web console. | You cannot use API operations to change the bandwidth of a subscription EIP. Change the specification in the console instead. | |
| 0 | InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other subnets. | VSwitch CIDR block of the vSwitch overlaps with vSwitch CIDR block of another vSwitch or with the destination CIDR block of an existing custom route. Use a CIDR block that is not in use. | |
| 400 | IncorrectVSwitchStatus | Some virtual switch is modifying within the same VPC. | Multiple vSwitches in the same VPC are in the Modifying state. Retry later. | |
| 0 | IncorrectVSwitchStatus | VSwitch Creation simultaneously is not supported. | Failed to create the vSwitch because a vSwitch in the VPC is in the Creating state. | |
| 0 | InvalidBackendServerRegionId.EqualRegionId | The specified BackendServerRegionId can not be the same as RegionId. | The specified BackendServerRegionId cannot be the same as the RegionId. | |
| 0 | ParameterIllegal | ipCount | The value of the IpCount parameter is invalid. | |
| 0 | IncorrcetRouteEntryStatus | Some route entry status blocked this operation. | The operation cannot be performed because some routes are in the pending or modifying state. | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | The HaVip quota for the instance has been exceeded. | |
| 0 | DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | The customer gateway has associated VPN connections that have not been deleted. Delete the associated VPN connections before deleting the customer gateway. | |
| 0 | InvalidIP.Malformed | Ip malformed. | The IP address format is invalid. | |
| 0 | InvalidPeerLocation.Malformd | The PeerLocation provided was invalid. | The value of the PeerLocation parameter is invalid. | |
| 0 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active | The operation is allowed only when the router interface is in the Active state. | |
| 0 | InvalidSpec.ValudNotSupported | The specified Spec is not supported. | The current specification does not support this operation. Change the specification and try again. | |
| 0 | DependencyViolation.Instance | Specified object has dependent resources | The object has associated resources. | |
| 0 | IncorrectEipStatus | Current elastic IP status does not support this operation | The current state of the EIP does not support this operation. | |
| 0 | Forbidden.DescriptionNotAllowedByCaller | The caller is not allowed to specify the Description parameter. | The Description parameter is not allowed. | |
| 0 | IncorrectRole.NotInitiatingSide | The specified RouterInterface is not InitiatingSide. | The router interface is not the requester. Select the requester router interface to initiate the connection. | |
| 0 | DependencyViolation.Tunnel | Specified object has dependent tunnel. | The object has associated tunnels. | |
| 0 | IncorretForwardEntryStatus | Some Forward entry status blocked this operation.. | The operation cannot be performed because some DNAT entries in the DNAT table are in the Pending or Modifying state. | |
| 0 | InvalidNexthop | The Specified nexthop illage. | The specified NextHopId does not exist. | |
| 0 | VswitchStatusError | The VSwitch is creating . | The vSwitch is being created. | |
| 0 | InvalidGlobalAccelerationInstanceName.Malformed | The specified Name is not valid. | The name format is invalid. | |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | The number of routes pointing to the HaVip instance has reached the upper limit. | |
| 0 | InvalidExternalIp.Malformed | The specified ExternalIp is not a valid IP address. | The public IP address is invalid. | |
| 0 | InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our records. | The specified router interface does not exist. Check whether the specified router interface is correct. | |
| 0 | Forbidden.PeeringSubnetMaskNotAllowedByCaller | The caller is not allowed to specify the PeeringSubnetMask parameter. | The PeeringSubnetMask parameter is not allowed. | |
| 0 | InvalidProtocal.ValueNotSupported | The specified IpProtocol does not support. | The specified protocol type is not supported. | |
| 0 | InvalidBackendServerRegionId.Mismatch | The specified BackendServerRegionId is not in the GlobalAccelerationInstance’s ServiceLocation. | The specified BackendServerRegionId is not in the service area of the Alibaba Cloud Global Accelerator (GA) instance. | |
| 0 | Forbidden.RAM | User not authorized to operate on the specified resource | The Resource Access Management (RAM) user does not have the permission to execute this operation. | |
| 0 | INVALID_PARAMETER | The parameter invalid. | The parameter is invalid. | |
| 0 | invalidRemovedIpAddresses.NotFound | Some of the specified value of RemovedIpAddress not found in specified BandwidthPackage. | An IP address in the IP list is not in the Internet Shared Bandwidth instance. Check the IP addresses in the list. | |
| 0 | InvalidRole.ValueNotSupported | The specified Role is not valid. | The specified Role is invalid. Check whether the parameter is correct. | |
| 0 | InvalidInstanceId.NotFound | The InstanceId provided does not exist in our records. | The ECS instance does not exist. The instance is not in the specified VPC. | |
| 0 | InvalidVSwitchId.NotFound | The specified VSwitch does not exist in the specified region. | The specified vSwitch does not exist in this region. | |
| 0 | InvalidVSwitchId.NotFound | VSwitch not exist. | The vSwitch does not exist. Check whether the specified vSwitch is correct. | |
| 0 | InvalidVSwitchId.NotFound | The specified virtual switch not found. | The specified vSwitch does not exist. | |
| 0 | InvalidVSwitchId.NotFound | The specified virtual switch does not exists. | The vSwitch does not exist. Check whether the specified vSwitch is correct. | |
| 0 | VpnGateway.FinancialLocked | The specified service is financial locked. | The service has an overdue payment. Top up your account before performing this operation. | |
| 0 | IncorretVSwitchStatus | Failed to create the vSwitch because some vSwitches are in the pending state. | ||
| 0 | Forbidden.ChargeTypeIsPrepaid | It's forbidden to release a prepaid EIP | A subscription EIP cannot be released. | |
| 0 | InvalidInstanceType.ValueNotSupported | The specified value of InstanceType is not supported. | The value of the InstanceType parameter is invalid. | |
| 0 | InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state. | The state of the Virtual Border Router is invalid. Check the state of the Virtual Border Router. | |
| 0 | InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | The CIDR block already exists in the route table. | |
| 0 | OperationDenied | Specified instance is not in VPC. | The instance does not exist in the VPC. | |
| 0 | OperationDenied | Specified operation is denied as route entry type is system. | The operation cannot be performed because the route is a system route entry. | |
| 0 | OperationDenied | The snapshot creation for the specified disk is not finished yet. | The snapshot creation for the specified disk has not been completed. | |
| 0 | OperationDenied | The operation is not supported in this status. | The operation cannot be performed in the current state. | |
| 0 | OperationDenied | Eip of default vpc not allow this operation | This operation is not supported for EIPs of the default VPC. | |
| 0 | InvalidIp.Malformed | The specified ip address is not valid. | The specified private IP address is invalid. Check whether the private IP address is correct. | |
| 0 | FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | The CIDR block must be a subset of the VPC CIDR block. | |
| 0 | Forbidden.DiskNotFound | The specified Disk is not found | The disk does not exist. | |
| 0 | InvalidInstanId.NotFound | Specified instance does not exist. | The specified instance does not exist. Check whether the instance is correct. | |
| 0 | VpcStatusError | The Vpc is creating . | A VPC is being created. Wait until the operation is complete and try again. | |
| 0 | InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state | The operation is not supported in the current state of the Virtual Border Router interface. | |
| 0 | InvalidInternalIp.Malformed | The specified InternalIp is not a valid IP address. | The destination private IP address is invalid. | |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | The VPC cannot be deleted because it still contains a NAT gateway. Delete the NAT gateway in the VPC before you delete a VPC. | |
| 0 | InvalidRouteTableId.NotFound | Specified route table does not exist. | The route table does not exist. | |
| 0 | InvalidBgpAuthkey.Malformed | Specified Bgp Group authkey is not valid. | The authentication key of the BGP group is invalid. | |
| 0 | InvalidBgpName.Malformed | Specified Bgp Group name is not valid. | The name of the BGP group is invalid. | |
| 0 | InvalidIPAddress.NotAvailable | The specified IPAddress is not available because it is a system reserved IPAddress. | The IP address is unavailable because it is a system reserved IP address. | |
| 0 | QuotaExceeded.pConnPerAP | Physical connection count per ap quota exceed. | The Express Connect circuit quota for the access point has been exceeded. | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | You do not have the permission to operate on the specified resource. Apply for the required permission and try again. | |
| 0 | InvalidBackendServerType.NotFound | The specified BackendServerType is not supported. | The specified backend server type is not supported. | |
| 0 | InvalidVRouter.NotFound | vRouter not exists. | The vRouter does not exist. Check whether the specified vRouter is correct. | |
| 0 | MissingParameter | Either nexthopId or nextHopList should be specified | Either nexthopId or nextHopList must be specified. | |
| 0 | MissingParameter | Missing mandatory parameter | Required parameters are missing. Check whether all required parameters are specified before you perform the operation. | |
| 0 | InvalidParam.NotNull | The parameter must not be null. | The parameter cannot be empty. | |
| 0 | InvalidAccessPoint.ValueNotAllowed | The non-vbr router interface cannot have access point configured. | You cannot configure an access point for a router interface that does not belong to a Virtual Border Router. | |
| 0 | InvalidUserCidr.Malformed | Specified UserCird status is wrong | The status of the UserCidr is incorrect. | |
| 0 | InvalidRouterId.NotFound | The specified RouterId does not exist in our recored. | The specified RouterId does not exist. | |
| 0 | MCMS_VPC_EMPTY | Specified region have no vpc. | No VPC exists in the specified region. Check whether the region is correct and try again with a different region. | |
| 0 | InvalidDescription | The description is not valid | The description format is invalid. | |
| 0 | InvalidVBRStatus | invalid virtual border router status. | The status of the Virtual Border Router is invalid. | |
| 400 | QuotaExceeded.Eip | Elastic IP address quota exceeded. | The number of elastic IP addresses (EIPs) has exceeded the quota limit. You can request a quota increase for EIPs or consider using a NAT gateway. | |
| 0 | Resource.QuotaFull | The quota of resource is full | The resource quota has reached the upper limit. | |
| 0 | InvalidInstance.StatusError | The router instance owener error. | The instance status is a fault. | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | The specified HaVip does not exist in the VPC. | |
| 0 | EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | The instance already has a public IP address. | |
| 0 | InvalidServiceLocation.Mismatch | The specified ServiceLocation does not match the region. | The specified service area does not match the current region. | |
| 0 | InvalidLocalGatewayIp.Malformed | The specified LocalGatewayIp is not valid. | The IP address of the local gateway is invalid. | |
| 0 | InvalidFilterKey.NotFound | The Key value of the filter is invalid. | ||
| 0 | InvalidRegionId.NotSupport | The RegionId provided does not support in our records. | The specified region ID is invalid. | |
| 0 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId must be all set. | The four parameters OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId must all be specified. | |
| 0 | IncorrectRouteEntryStatus | Specified routeEntry status error. | The operation cannot be performed because routes in the current route table are in the pending or modifying state. | |
| 0 | InsufficientBalance.Eip | Your account does not have enough balance. | The account balance is insufficient. Top up your account before performing this operation. | |
| 0 | IncorrectRouteEntryStatus | VBR has NotStable route entry. | The operation cannot be performed because route entries in the border route table are in the pending or modifying state. | |
| 0 | IncorrectRouteEntryStatus | The vpc has NotStable routeEntry status. | The operation cannot be performed because routes in the current route table are in the pending or modifying state. | |
| 0 | IncorrectRouteEntryStatus | Vpc NotStable route entry. | The operation cannot be performed because routes in the current route table are in the pending or modifying state. | |
| 0 | InvalidParameter.Spec.ValueNotSupported | The specified Spec is not valid. | The specification is invalid. | |
| 0 | DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | The object has associated router interfaces. | |
| 0 | InvalidStatus.NotAllowed | The virtual border has been associated by physicalConnection. | The Virtual Border Router is already associated with an Express Connect circuit. | |
| 0 | InvalidBgpDiscription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | |
| 0 | VpnUnderStock | There are not enough vpn gateways in stock | The VPN gateway is out of stock. | |
| 0 | InvalidParameter.Mismatch | Specified elastic IP address and ECS instance are not in the same region. | The EIP and the ECS instance are not in the same region. | |
| 0 | Forbidden.FinancileLocked | This RouterInterface is financiel locked because of bills outstanding. | The routing interface is locked due to overdue payment because you have unsettled bills. | |
| 0 | InvalidVbrNetwork | vbr netowrk not exists | The specified Virtual Border Router does not exist. Check whether the specified Virtual Border Router is correct. | |
| 0 | Forbidden.EnableClassicLink | Only VPCs with CIDR blocks 172.16.0.0/12, 192.168.0.0/16, or 10.0.0.0/8 can enable ClassicLink. For more information, see ClassicLink overview and limits. | ||
| 0 | TaskConflict | The eip operate too frequent | EIP operations are too frequent. | |
| 0 | InvalidInstanceId.NotFound | Specified instance does not exist. | The specified instance does not exist. Check whether the instance is correct. | |
| 0 | InvalidInstanceId.NotFound | The specified Instance does not exist in the specified region. | The instance does not exist in the specified region. | |
| 400 | InvalidIAssociatedInstanceType.ValueNotSupported | The specified value of AssociatedInstanceType is not supported. | The value of AssociatedInstanceType is invalid. Check whether this parameter is correct. | |
| 0 | InvalidNextHopId.NotFound | Specified next hop does not exist. | The specified next hop does not exist. | |
| 0 | InvalidRouterType.ValueNotSupported | The specified RouterType is not valid. | The specified router type is invalid. | |
| 0 | SNAT_IP_POOL_COUNT_TOO_MANY | The Snat pool ip too many. | The number of IP addresses in the SNAT IP pool has reached the quota. | |
| 0 | Forbidden.OperationNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | Deleting the Virtual Border Router is not allowed. | |
| 0 | InvalidName.Malformed | The specified "Name" is not valid. | The specified name is in an invalid format. | |
| 0 | InvalidName.Malformed | The specified ‘Name’ is not valid. | The specified name is in an invalid format. | |
| 0 | InvalidVpcDiscription.Malformed | Specified VPC description is not valid. | The format of the VPC description does not meet the requirements. | |
| 0 | Forbidden.PeerGatewayIpNotAllowedByCaller | The caller is not allowed to specify the PeerGatewayIp parameter. | Specifying the PeerGatewayIp parameter is not allowed. | |
| 0 | IncorrectOppositeInterfaceInfo | Cannot connect on the same router | Connecting the same vRouter is not allowed. | |
| 0 | InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | The CIDR block format is invalid. | |
| 0 | InvalidNextHop | Specified nexthop and nexthop list cannot both null. | The next hop and the next hop list cannot both be empty. | |
| 0 | InvalidVPC.NotFound | vpc not exists. | The virtual private cloud (VPC) does not exist. Check whether the specified VPC is correct. | |
| 0 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The vSwitch description is invalid. | |
| 0 | Forbidden.NoRiFound | No vlan router interfaces are found. | No available VLAN router interfaces exist. | |
| 0 | Forbidden.NameNotAllowedByCaller | The caller is not allowed to specify the Name parameter. | Specifying the Name parameter is not allowed. | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified region. | The specified HaVip is not in the specified region. Check whether the selected region is correct. | |
| 0 | InvalidParams.NotFound | instance not found | The instance does not exist. | |
| 0 | InvalidIdempotenceParameter.Mismatch | The specified parameters are different from before. | The client token is different from the previous one. | |
| 0 | NOT_ALLOW_USE_SOURCECIDR | The User not in nat_scope_unlimited white list. Cannot use SourceCidr param. | The private IP address is outside the VPC CIDR block range. | |
| 0 | InvalidIPAddress.OutOfRange | The specified IPAddress is out of VSwitch CIDR. | The private IP address is not within the vSwitch CIDR block. | |
| 0 | QuotaExceeded.freevbr | Free virtual boarder router quota exceed. | The Virtual Border Router quota has been exceeded. | |
| 0 | QuotaExceed.RouterInterface | Living RouterInterface quota exceeded. | The number of active router interfaces has reached the quota. | |
| 0 | InvalidSnatIp.NotFound | Specified SnatIp does not found on the NAT Gateway | The public IP address is not in the NAT gateway. | |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | The vSwitch cannot be deleted because it still contains unreleased resources. | |
| 0 | QuotaExceeded.HaVip | Living HaVip quota exceeded. | The quota for active high-availability virtual IP addresses (HaVips) has been exceeded. | |
| 0 | InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | The specified start time is invalid. | |
| 400 | InvalidParameter | The parameter is invalid. | The parameter is invalid. | |
| 0 | CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | Cross-BID connections are not allowed. | |
| 0 | InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | The specified start time is invalid. | |
| 0 | InvalidLineOperator.Malformd | The LineOperator provided was invalid. | The value of the LineOperator parameter is invalid. | |
| 0 | InvalidOppositeRegionId.NotFound | The oppositeRegionId provided does not exist in our records. | The specified peer region does not exist. | |
| 0 | InvalidNatGatewayName.MalFormed | NatGateway name is not valid. | The gateway name is invalid. | |
| 400 | InvalidOpposite.NotFound | The opposite does not exist. | The peer does not exist. | |
| 0 | InvalidNatGatewayDescription.MalFormed | NatGateway description is not valid. | The gateway description is invalid. | |
| 0 | Forbidden.VBRExists | physical connection owner's vbr still exists. | The Virtual Border Router (VBR) of the Express Connect circuit still exists. | |
| 404 | InvalidVpcId.NotFound | Specified value of VpcId is not found in our record. | The VPC does not exist. Check whether the specified VPC is correct. | |
| 400 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | The request failed due to a temporary server error. | |
| 400 | QuotaExceeded.LocalISPEip | The quota for Local ISP EIPs has been exceeded. | The LocalISP quota has been exceeded. | |
| 400 | QuotaExceeded.LocalISPBasicEip | The quota for Local ISP Provider EIP has been exceeded. | The LocalISPBasic EIP quota has been exceeded. | |
| 400 | OperationDenied.ExceedMaxCount | The number of IPs exceeds the maximum limit of 50 per batch operation. | The number of IP addresses in a single batch operation exceeds the upper limit of 50. Perform the operation in batches. | |
| 400 | OperationDenied.Ipv6InCommonBandwidthPackage | The specified IPv6 instance has joined a common bandwidth package. Please remove it from the package before releasing its public bandwidth. | The specified IPv6 instance has been added to an Internet Shared Bandwidth instance. Remove it from the Internet Shared Bandwidth instance before releasing the IPv6 Internet bandwidth. | |
| 400 | OperationUnsupported.BandwidthPackageType | Only common bandwidth packages of the Common type support this operation. | Only Internet Shared Bandwidth instances of the Common type support this operation. | |
| 400 | OperationUnsupported.Ipv6QosNotReady | IPv6 QoS bandwidth limiting is not supported yet. | Setting or canceling secondary bandwidth throttling (QoS) is not supported for IPv6 IP addresses. This feature will be available after the management capability is ready. | |
| 400 | OperationFailed.Ipv6AlreadyBinded | The specified IPv6 instance has already joined another common bandwidth package. | The specified IPv6 instance has been added to another Internet Shared Bandwidth instance. Remove it first before performing this operation. | |
| 400 | OperationDenied.Ipv6NoBandwidth | IPv6 instances without public bandwidth enabled cannot join a common bandwidth package. | IPv6 instances without Internet bandwidth enabled cannot be added to an Internet Shared Bandwidth instance. | |
| 400 | OperationDenied.InstanceNotSupportIpv6 | The specified common bandwidth package does not support IPv6 because its availability zone is not in the Lingze cluster. | The specified Internet Shared Bandwidth instance does not support IPv6 because its zone does not belong to a Lingze cluster and cannot be upgraded to dual-stack. | |
| 400 | OperationDenied.BandwidthPackageNotDualStack | The IP version of the specified common bandwidth package does not match the operation. A dual-stack bandwidth package is required. | The IP version of the specified Internet Shared Bandwidth instance does not match the operation. Removing an IPv6 IP address requires the Internet Shared Bandwidth instance to be of the dual-stack type. | |
| 400 | OperationDenied.BandwidthLessThanMemberMax | The new bandwidth value is less than the maximum QoS bandwidth of member IPs in the common bandwidth package. | The modified bandwidth value is less than the maximum secondary bandwidth throttling value configured for member IP addresses in the Internet Shared Bandwidth instance. The new bandwidth must be greater than or equal to the maximum throttling value of all member IP addresses. | |
| 400 | OperationUnsupported.PrepaidIpv6 | Prepaid IPv6 instances cannot join a common bandwidth package. Only pay-as-you-go IPv6 instances are supported. | Subscription IPv6 instances cannot be added to an Internet Shared Bandwidth instance. Only pay-as-you-go IPv6 instances are supported. | |
| 400 | OperationDenied.RegionNotSupportDualStack | The current region does not support dual-stack common bandwidth package. Please confirm that the dual-stack feature is enabled for this region. | Dual-stack Internet Shared Bandwidth instances are not supported in the current region. Make sure that the dual-stack feature is enabled in this region. | |
| 400 | OperationDenied.IPv6RouteEntryExist | The operation is not allowed because IPv6 custom route entries still exist in the VPC. Delete the IPv6 custom route entries, and then unassociate the IPv6 CIDR block again. | The operation is not allowed because IPv6 custom route entries still exist in the VPC. Delete these IPv6 custom route entries and then disassociate the IPv6 CIDR block again. | |
| 400 | OperationDenied.EniBizTypeNotSupportRouteEntry | The operation is not allowed because of EniBizTypeNotSupportRouteEntry. | The service type of the ENI does not support being used as the next hop of a route entry. Only ENIs of the normal or bonding service type can be used as the next hop. | |
| 400 | UnsupportedFeature.Ipv6OnlyVsw | IPv6-only VSwitches are not supported in this region. | The IPv6 Only vSwitch feature is not enabled for the current account in the specified region. Creating an IPv6-only vSwitch is not supported. | |
| 400 | OperationDenied.BatchCreateRouteEntryToCen | Failed to batch create route entries to CEN. The CEN side rejected this route distribution operation. | Failed to create route entries in CEN in batches. CEN rejected the route advertisement operation. | |
| 400 | IncorrectStatus.PrefixListRelation | The related prefix list relation is in an intermediate state and cannot perform the current operation. | The associated prefix list association is in a transitional state. The current operation cannot be performed. | |
| 500 | OperationFailed.SYSTEM_BLOCK | The request is temporarily blocked due to system overload in the region. Please try again later. | The system load in the current region is too high. The request is temporarily blocked. Try again later. | |
| 500 | OperationFailed.SOCKET_TIMEOUT_ERROR | The request timed out while calling the backend service. Please try again later. | The call to the backend service timed out. Try again later. | |
| 400 | Forbidden.RateLimitRule | You are not authorized to operate the rate limit rule feature. | You do not have the permission to manage bandwidth throttling rules. | |
| 400 | IncorrectStatus.RateLimitRule | The specified rate limit rule is in a status that does not support modification. | The current status of the specified bandwidth throttling rule does not support this operation. | |
| 400 | InvalidParameter.CidrTunnelExclusive | SourceCIDRs and TunnelIndex are mutually exclusive. | SourceCIDRs and TunnelIndex are mutually exclusive and cannot be specified at the same time. | |
| 403 | Forbidden.RAM | Request was denied due to user RAM permission check denied. | RAM authentication failed. You do not have the permission to perform this operation. | |
| 400 | IncorrectStatus.RateLimitRule | The specified rate limit rule is in a status that does not support deletion. | The current status of the bandwidth throttling rule does not support the delete operation. | |
| 400 | ResourceAlreadyExists.RateLimitRule | The specified rate limit rule already exists. | An identical bandwidth throttling rule already exists for the specified NAT gateway. | |
| 400 | InvalidParameter.SourceCidrDuplicated | The specified source CIDRs contain duplicate entries. | The specified source CIDR list contains duplicate entries. | |
| 400 | OperationFailed.SnatEntryNotReady | The SNAT entry associated with the specified TunnelIndex is not ready. Please try again later. | The SNAT entry corresponding to the specified TunnelIndex is not ready. Try again later. | |
| 400 | InvalidRateLimitRuleId.NotFound | The specified rate limit rule does not exist. | The specified rate limiting rule does not exist. | |
| 400 | QuotaExceeded.RateLimitRule | The quota of rate limit rules per NAT gateway is exceeded. | The number of rate limiting rules for a single NAT gateway exceeds the quota. | |
| 400 | InvalidParameter.TunnelIndex | The specified TunnelIndex does not belong to a valid SNAT entry of the NAT gateway. | The specified TunnelIndex does not belong to a valid SNAT entry of the NAT gateway. | |
| 400 | InvalidParameter.SourceCidrConflict | The specified source CIDR conflicts with an existing rate limit rule. | The specified source CIDR block conflicts with an existing rate limiting rule. | |
| 400 | ResourceAlreadyExists.TunnelRateLimitRule | A rate limit rule already exists for the specified tunnel index. | A rate limiting rule already exists for the specified TunnelIndex. | |
| 400 | InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist. | The specified NAT gateway instance does not exist. | |
| 400 | IllegalParam.NextToken | The param of NextToken is illegal. | The NextToken parameter is invalid. | |
| 400 | OperationDenied.RateLimitRule | The operation is not allowed because the specified parameters are invalid or the NAT gateway does not support the IP rate limit feature. | The operation is not allowed because the specified parameters are invalid or the NAT gateway does not support the IP-based rate limiting feature. | |
| 400 | QuotaExceeded.RateLimitRuleSourceCidr | The quota of source CIDRs per rate limit rule is exceeded. | The number of source CIDR blocks in a single rate limiting rule exceeds the quota. | |
| 400 | OperationDenied.Dns64AlreadyEnabled | The operation is not allowed because DNS64 is already enabled on the VSwitch. | DNS64 is already in the enabling status on the vSwitch. You do not need to enable it again. | |
| 400 | OperationDenied.Dns64RequiresIpv6 | The operation is not allowed because DNS64 can only be enabled when the VSwitch has an IPv6 CIDR block. | DNS64 can be enabled only when the vSwitch has an IPv6 CIDR block configured. | |
| 400 | UnsupportedFeature.Dns64 | The feature of DNS64 is not supported. | The DNS64 feature is not supported in the current region or zone. | |
| 400 | OperationDenied.Dns64Disabled | The operation is not allowed because DNS64 is already disabled on the VSwitch. | DNS64 is already disabled on the vSwitch. You do not need to disable it again. | |
| 400 | OperationDenied.EnableIpv6AndDns64AtTheSameTime | The operation is not allowed because enabling IPv6 and DNS64 at the same time is not supported. | IPv6 and DNS64 cannot be enabled at the same time. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The param of cidrBlock and Ipv6Only are mutually exclusive. | The param of cidrBlock and Ipv6Only are mutually exclusive. | |
| 400 | InvalidTunnel.AdminStatus | The specified tunnel admin status does not support this operation. | The specified tunnel administrator status does not support this operation. | |
| 400 | OperationDenied.NatGatewayIpv6NotEnabled | The IPv6 feature is not enabled for the NAT gateway. | IPv6 is not enabled on the NAT gateway. | |
| 409 | OperationFailed.RouteConflict | The CIDR blocks of the specified prefix list conflict with existing routes: %s. | The CIDR blocks in the specified prefix list conflict with existing routes on the IPsec-VPN connection. Resolve the conflicts and try again. | |
| 400 | InvalidParameter.RateLimitRule | The specified parameter %s is not valid. %s. | The request parameters for the NAT gateway rate limiting rule are invalid. The error message provides the parameter name and value requirements. | |
| 400 | OperationUnsupported.Ipv6SnatNotSupported | The operation is not supported because IPv6 source CIDR SNAT entries are not supported for this NAT gateway. | The NAT gateway does not support creating SNAT entries with IPv6 source CIDR blocks. The request to create an SNAT entry with an IPv6 CIDR block as the source CIDR block is rejected. | |
| 400 | OperationFailed.VSwitchIpv6NotEnabled | The operation failed because IPv6 is not enabled on the specified VSwitch. | The operation failed because IPv6 is not enabled on the specified vSwitch. | |
| 400 | OperationUnsupported.Ipv6NotEnabled | The operation is not allowed because IPv6 is not enabled on the NAT gateway. | This operation is not allowed on a NAT gateway that does not have IPv6 enabled. | |
| 400 | OperationFailed.EniIsUnsuccessful | The operation failed because the elastic network interface is in an unsuccessful state. | The operation failed because the elastic network interfaces (ENIs) or network interface controller (NIC) is in an abnormal state. | |
| 400 | UnsupportedFeature.Ipv6Enabled | The feature of Ipv6Enabled is not supported. | The current NAT gateway does not support the Ipv6Enabled feature. | |
| 400 | IncorrectStatus.VSWITCH | The status of VSWITCH is incorrect. | The vSwitch is in an abnormal state. | |
| 400 | OperationUnsupported.Ipv6NotSupported | The operation is not supported because the IPv6 feature is not enabled for the current account or region. | The IPv6 feature is not enabled for the current account or region. This operation is not supported. | |
| 400 | DependencyViolation.SnatEntry | The NAT gateway has dependent IPv6 SNAT entries. Delete them before disabling IPv6. | The NAT gateway has dependent IPv6 SNAT entries. Before disabling IPv6, please remove these entries first. | |
| 400 | UnsupportedOperation.TraditionalVpnGateway | The traditional VPN gateway does not support tunnel admin operations. | Traditional VPN gateways do not support tunnel administrator operations. |
Is this page helpful?