Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | The specified instance does not exist. | |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | The specified billing period is invalid. | |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | The specified billing type is unavailable. | |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | Failed to modify the route table attribute: the table name format is invalid. | |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | Failed to call the internal service. Please try again later. | |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | The input Name is invalid. | |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | Physical ports cannot be directly enabled on access devices. | |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | The specified access point does not exist or you do not have permission to view it. | |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | Insufficient account balance for purchasing VPN. | |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | Insufficient available account amount. | |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | Insufficient account balance. | |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | Physical ports cannot be directly enabled for AliUid. | |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | An error occurred while allocating a public IP address for the EIP bandwidth plan. | ||
| 400 | AnotherJobTesting | There is another job which is testing. | A user can run only one fault injection task concurrently in the same region. | |
| ARREARAGE | The specified account has overdue payments. | |||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | The IP version of the EIP instance does not match that of the shared bandwidth package. | |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | The DHCP options set instance ID does not match the VPC. Verify the mapping between the DHCP options set and the VPC. | |
| AUTH.RAM_AUTH_FAILED | An error occurred while verifying the RAM account identity. | |||
| 400 | AvailableZoneNotExist | Available zone not exist. | The specified zone does not exist. | |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | The specified bandwidth plan is locked due to overdue payments. | ||
| BandwidthPackage.QuotaExceeded | The number of EIP bandwidth plans exceeds the upper limit. | |||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | EIPs in hybrid cloud mode cannot be added to low-bandwidth packages. | |
| BandwidthPackageId.InvalidBizStatus | The EIP bandwidth plan is locked due to overdue payments. | |||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | The specified bandwidth package is financially locked and cannot accept new EIPs. | |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | The operation on the EIP bandwidth plan conflicts with another operation. | ||
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | The specified bound instance already has bandwidth. | |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | The ECS instance already has a DNAT rule. Delete the corresponding DNAT rule before proceeding. | |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | You are unauthorized to manage the specified EIP. | ||
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | Both tags and resource group cannot be empty. | |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | Parameters GatewayRouteTableId and Ipv4GatewayRouteTableId cannot both be empty. We recommend using GatewayRouteTableId. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | Ipv6InstanceId and Ipv6InternetBandwidthId cannot both be empty. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | Input parameters Ipv6AddressId and Ipv6InternetBandwidthId cannot both be empty. | |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | The account has no payment method configured or insufficient reserved amount. | |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | The network mask length of the client IP pool must be between 16 and 29, inclusive. | |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | The current client CIDR block is unavailable. | |
| COMMODITY.INVALID_COMPONENT | The specified instance component is invalid. Check the specified instance component. | |||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | Sales module parameters fail constraint validation. | |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | The specified VSwitchCidrReservationMask conflicts with VSwitchCidrReservationCidr. Modify according to API documentation and retry. | |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | The number of HAVIPs in the VPC has reached the upper limit. | ||
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | Exceeded the HaVip quota for the instance. | |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | The number of route entries pointing to this HaVip instance has reached the upper limit. | |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes pointing to HaVip in the same route table exceeds the limit. | |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | The number of GA instances associated with a backend server instance reaches the upper limit. | ||
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | Exceeded the HaVip instance quota. | |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | The number of destination routes created exceeds the quota limit. | |
| CreateOrderFailed | The system failed to create the order. | |||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | The number of policy-based routes exceeds the quota limit. | |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | The number of SSL certificates created exceeds the quota limit. | |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | The number of VPN connections exceeds the quota limit. | |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | The number of VPN customer gateways created exceeds the quota limit. | |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current CBN status does not support creating a VSwitch. | |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | Insufficient quota. Contact your channel partner to increase the quota. | |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | The current VPN connection instance is cross-account authorized to another account's CEN. Revoke the cross-account authorization before deletion. | |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | The cross-BID connection is invalid. | ||
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | Creating a VBR for users from other sites is prohibited. | |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | A conflict exists between the current customer gateway and routes. | |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | The customer gateway associated with the IPSec connection and the VPN gateway must not share the same gateway IP address. | |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current CBN status does not support deleting a VSwitch. | |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | Resource deletion protection is enabled. | |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | Resource deletion protection does not exist. | |
| 400 | DeletionProtection.OwnerError | The resource owner error. | You are not the owner of this resource and cannot perform the operation. | |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | Prepaid resources are not supported. | |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | The resource does not exist. | |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | This resource type is not supported. | |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | Resources still exist in this VSwitch; deletion is not allowed. | |
| DependencyViolation | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | Resource [%s] depends on [%s]. Delete the dependent resource first. | |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | The VPC has reverse access authorization relationships and cannot be deleted. | |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | Dependencies exist on the resource to be operated on. Remove the associations first. | |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT service plans are associated with the NAT gateway. Disassociate the NAT service plans from the NAT gateway and try again. | ||
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | The VBR is dependent on a BgpGroup and cannot be deleted. | |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | The VBR has BGP advertised CIDR configurations and cannot be deleted. | |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | Dependent BGP peers exist. | |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | The current VSwitch is being used by cloud services and cannot be deleted. Confirm the cloud service usage scenario. | |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | Cloud service resources exist in this VPC; deletion is not allowed. | |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | Dependency conflict: a custom route table exists. | |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | Unreleased DHCP options set instances exist in this VPC; deletion is not allowed. | |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended upon by other resources; the current operation is not allowed. | |
| DependencyViolation.EIPS | The specified NAT gateway is already associated with an EIP. | |||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | The specified NAT gateway is already bound to an EIP. Unbind it from the NAT gateway first. | |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | The VSwitch cannot be deleted while the NAT gateway exists. | |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | One or more specified public IP addresses are used by port forwarding rules. Delete the rules before you call this operation. | ||
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | The shared bandwidth package has undeleted SNAT or DNAT entries. Delete the SNAT or DNAT entries before proceeding. | |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | Fullnat configuration entries depend on this NAT IP, so this operation cannot be completed. | |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | The VPC contains endpoint services and cannot be deleted. Delete all endpoints in the VPC first. | |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources; the current operation is not allowed. | |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | GRE tunnels exist on the specified VPN gateway and must be deleted first. | |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | The VSwitch cannot be deleted because it has associated HaVips. | |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | The HAVIP is associated with an EIP and cannot be deleted. | ||
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | The HAVIP serves as the next hop of a route entry and cannot be deleted. You must delete the route entry before you can delete the HAVIP. | ||
| DependencyViolation.Instance | Specified object has dependent resources | The VPC is associated with a resource. | ||
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | The VPC deletion failed because cloud service instances remain undeleted in the VPC. | |
| DependencyViolation.ip | The specified NAT gateway is already associated with an EIP. | |||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | The resource has been assigned an IpPrefix. Delete the IpPrefix and retry. | |
| DependencyViolation.Ips | The specified EIP bandwidth plan is already associated. | |||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | The resource cannot be deleted because it has an IPsec server dependency. | |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | The VPC contains an IPv4 gateway and cannot be deleted. | |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources; the current operation is not allowed. | |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] depends on an IPv6 reserved CIDR block. Delete the dependent resources first. | |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | The VPC contains an IPv6 gateway and cannot be deleted. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources; the current operation is not allowed. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | IPv6 bandwidth is enabled for the specified IPv6 instance. Release the IPv6 bandwidth before proceeding. | |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | The VSwitch is joined to a multicast domain and cannot be deleted. | |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | The VPC contains a NAT gateway and cannot be deleted. Delete the NAT gateway first. | |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | Dependent NAT IPs prevent this operation. | |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | Dependent NAT IP CIDRs prevent this operation. | |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | The specified object has dependent Network ACL resources. | |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | The VSwitch cannot be deleted while Network ACLs exist. | |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | NQA configurations exist; the VBR cannot be deleted. | |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | The VPC contains an undeleted peer RouterInterface, causing VPC deletion to fail. | |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | The PrefixList cannot be deleted due to existing references. | |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | Dependent resources exist. | |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | Resource [%s] depends on [%s], so this operation cannot be completed. | |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | Dependent protective rate-limiting rules exist. | |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | The VPC deletion failed because custom route entries remain undeleted. | |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | The specified vSwitch is connected to a router interface and cannot be deleted. | ||
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | Dependent route entries prevent this NAT operation. | |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | The object is already associated with a router interface. | ||
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | A RouterInterface cannot be deleted when referenced by a route entry (as a next-hop target). Delete all such route entries first. | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | The VBR is already referenced. | |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | The VSwitch is bound to a route table and cannot be deleted. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | The VPC deletion failed because security groups remain undeleted. Delete all security groups in the VPC first. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | The VPC deletion failed because security groups remain undeleted. Delete all security groups in the VPC first. | |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | The VPC deletion failed because security group [%s] remains undeleted. Delete all security groups in the VPC first. | |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | Public bandwidth is enabled for IPv6 address [%s] under IPv6 gateway [%s], allocated from shared user [%s]. Delete it and retry. | |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | The PrefixList cannot be deleted due to sharing relationships. | |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | The VSwitch cannot be deleted while SNAT is in use. | |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | One or more specified public IP addresses are used by SNAT entries. Delete the SNAT entries before you call this operation. | ||
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | The shared bandwidth package has undeleted SNAT or DNAT entries. Delete the SNAT or DNAT entries before proceeding. | |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | SSL VPN servers exist on the specified VPN gateway and must be deleted first. | |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | Traffic mirroring sessions still depend on the current resource. | |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | The specified resource is dependent on other resources; the current operation is not allowed. | |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | The VPC is associated with a tunnel. | ||
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | The DHCP options set is bound to a VPC and cannot be deleted. | |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | Dependent endpoint services prevent this NAT operation. | |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | The customer gateway has a VPN connection. Delete the VPN connection before you delete the customer gateway. | ||
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | VPN connections exist on the specified customer gateway and must be deleted first. | |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | The VPC deletion failed because VSwitches remain undeleted. Delete all VSwitches in the VPC first. | |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The VSwitch has active VSwitchCidrReservation and cannot be deleted. | |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | The number of mappings for the destination IP port exceeds the quota. | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | DryRun validation passed. | |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | The specified ClientToken is duplicated. | |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | The specified IP address is duplicated. Modify according to API documentation parameter requirements and retry. | |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | The specified SecondaryCidrBlock is duplicated. | |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | The specified TagKey parameter is duplicated. | |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | Next duplicate route entry. | |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | Parameter duplication detected. | |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | Duplicate cidrBlock provided. | |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | Failed to add CIDR block to the address pool because both CIDR block and subnet mask cannot be specified simultaneously. | |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | DNAT public port %s is already occupied. | |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | InternalPort parameter is duplicated or already occupied. | |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | Local IP is duplicated. | |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | Interconnection IP is duplicated. Change it and retry. | |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | Parameter duplication detected. | |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | Local IP address parameter is duplicated. Change the local IP and retry. | |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | Local IP address parameter is duplicated. Change the local IP and retry. | |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | Local IP address is duplicated. | |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | Interconnection IP address is duplicated. Change it and retry. | |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | BGP neighbor IP address is duplicated. | |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | Peer IP address is duplicated. | |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | Duplicate parameter values exist. | |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | The peer IP address parameter is duplicated. Change the peer IP address and try again. | |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | The peer IP address is duplicated. | |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | The specified priority parameter conflicts with an existing priority. | |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | The traffic mirror source instance ID parameter contains duplicate values. | |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | Duplicate values exist in the input trafficPath parameter. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | A shared physical connection bound to a QoS policy does not support creating cross-account VBRs. Contact your business manager. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | A dedicated physical connection bound to a QoS policy does not support creating shared physical connections. Contact your business manager. | |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | The device hosting the physical connection does not support the QoS feature. | |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | The current fault drill task is in progress. Please try again later. | |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | A maximum of 16 resources can be added to a fault drill task. | |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | A fault drill task is already running for the current user. Complete it before retrying. | |
| 400 | EcFailToGetAp | Fail to get access point details. | The corresponding access point information cannot be retrieved. | |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | The Express Connect authorization relationship does not exist. | |
| 400 | EcNotEnoughResource | Insufficient access point resources. | Insufficient access point resources. | |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | High-reliability physical connections are temporarily unavailable for purchase in the local region. | |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | In a single-VBR multi-Pconn scenario, all Pconns must be bound to QoS policies. | |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | Dedicated physical connections containing cross-account VBRs do not support binding QoS policies. | |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | Dedicated physical connections containing shared physical connections do not support binding QoS policies. | |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | The current QoS configuration conflicts with other configurations. Please try again later. | |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | An IPv4 address configuration and an IPv6 address configuration cannot coexist within a single QoS rule. Additionally, if the existing network type is IPv4, it cannot be changed to IPv6 (and vice versa). Please verify and modify accordingly. | |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | The current QoS policy is associated with a physical connection and cannot be deleted directly. Disassociate it first and retry. | |
| EipOperation.TooFrequently | Associating EIPs with the EIP bandwidth plan too frequently. Try again later. | |||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | This EIP has been added to the bandwidth package too frequently. Please try again later. | |
| EIP_BIND_NATGATEWAY | The EIP is associated with a NAT gateway. | |||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | The instance is already assigned a public IP address. | ||
| EIP_NOT_SUPPORT_SNAT_POOL | The specified EIP cannot be added to the SNAT pool. | |||
| EIP_UNDERSTOCK | There are not enough eip in stock | The EIP inventory is insufficient. | ||
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | Identical tunnel CIDRs exist across different IPsec tunnels' BGP configurations. The tunnel CIDR is %s. | |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | A route prefix %s in the VPC route table is contained within the IPsec server client CIDR. | |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | A policy route with the same prefix exists. The prefix is %s. | |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | High availability is not supported in the current region. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | A route with the same prefix exists. The prefix is %s. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | A route with the same prefix exists. The prefix is %s. | |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | A route prefix %s in the VPC route table is contained within the SSL VPN client CIDR. | |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | The current VPN gateway type does not support enabling high availability. | |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | High availability is only supported for IPsec VPN or SSL VPN. | |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | When an ENI is bound to a direct-through EIP, the ENI must be unbound from the ECS instance. | |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | The number of associated VBRs has reached the upper limit. | ||
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | Parameters %s and %s are mutually exclusive. | |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | The specified instance does not exist. | |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | The specified billing period is invalid. | |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | The specified billing type is invalid. | |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | The new name of the route table is invalid. | |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | Failed to call the internal service. Try again later. | |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | ||
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | The access device is not allowed to use a physical port. | |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | The input access point does not exist or does not have permission to view it. | |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | The user's account balance for purchasing the VPN is insufficient. | |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | The account does not have sufficient balance. | |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | User attempted to create a new order.but user account balance is insufficient. | |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | You are not allowed to use a physical port when you use an Alibaba Cloud UID. | |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | An error occurred while allocating a public IP address for the EIP bandwidth plan. | ||
| 400 | AnotherJobTesting | There is another job which is testing. | The same user can only perform one fault drill task in the same region at the same time. | |
| ARREARAGE | The specified account has overdue payments. | |||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | ||
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | The ID of the DHCP options set does not match the VPC. Check whether the specified DHCP options set is associated with the VPC. | |
| AUTH.RAM_AUTH_FAILED | An error occurred while verifying the RAM account identity. | |||
| 400 | AvailableZoneNotExist | Available zone not exist. | The zone does not exist. | |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | The specified bandwidth plan is locked due to overdue payments. | ||
| BandwidthPackage.QuotaExceeded | The number of EIP bandwidth plans exceeds the upper limit. | |||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | You cannot associate an EIP in hybrid cloud mode with an EIP bandwidth plan that provides low bandwidth. | |
| BandwidthPackageId.InvalidBizStatus | The EIP bandwidth plan is locked due to overdue payments. | |||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | The operation on the EIP bandwidth plan conflicts with another operation. | ||
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | The specified bound instance already has bandwidth. | |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | The ECS instance already has a port forwarding rule (DNAT). Delete the corresponding port forwarding rule before performing the operation. | |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | You are unauthorized to manage the specified EIP. | ||
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | The tags and resource groups cannot be empty at the same time. | |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | You cannot leave both Ipv6InstanceId and Ipv6InternetBandwidthId empty. | |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | Input Ipv6AddressId and Ipv6InternetBandwidthId cannot be empty at the same time | |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | The error message returned because your account does not have a payment method configured or does not have sufficient balance. | |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | The subnet mask of the client IP pool must range from 16 to 29. | |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | The client CIDR block is unavailable. | |
| COMMODITY.INVALID_COMPONENT | The specified instance component is invalid. Check the specified instance component. | |||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | The instance component is invalid. | |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | The VSwitchCidrReservationMask value conflicts with the VSwitchCidrReservationCidr value. Adjust the values and try again. | |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | The number of HAVIPs in the VPC has reached the upper limit. | ||
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | The number of HAVIPs has reached the upper limit. | |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | The number of route entries that point to the HAVIP has reached the upper limit. | |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes that point to the HAVIP in a route table exceeds the upper limit. | |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | The number of GA instances associated with a backend server instance reaches the upper limit. | ||
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | The number of HAVIPs has reached the upper limit. | |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | The number of created destination routes exceeds the quota limit. | |
| CreateOrderFailed | The system failed to create the order. | |||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | The number of policy routes exceeds the quota limit. | |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | Create the number of SSL certificates that exceed the quota limit. | |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | The number of VPN connections exceeds the quota limit. | |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | The number of created VPN customer gateways exceeds the quota. | |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | You cannot create a vSwitch when the CEN instance is in the current state. | |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | The quota is insufficient. Contact your partner to increase the quota. | |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | the current vpn connection instance is cross-account authorized to the cen of another account. you need to cancel the cross-account authorization before deleting the instance. | |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | The cross-BID connection is invalid. | ||
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | You are not allowed to create a VBR for another Alibaba Cloud account. | |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | The customer gateway conflicts with the current routes. | |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | The user gateway IP conflicts with the VPN gateway IP. | |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | You cannot delete the vSwitch when the CEN instance is in the current state. | |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | Deletion protection is enabled. | |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | Deletion protection is disabled. | |
| 400 | DeletionProtection.OwnerError | The resource owner error. | The operation is not allowed because the resource does not belong to you. | |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | Subscription resources are not supported. | |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | The resource does not exist. | |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | This type of resource is not supported. | |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | Failed to delete the vSwitch because resources attached to the vSwitch are not released. | |
| DependencyViolation | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | The VPC has a reverse access and cannot be deleted. | |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource of the operation has dependencies. Please disassociate them first. | |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT service plans are associated with the NAT gateway. Disassociate the NAT service plans from the NAT gateway and try again. | ||
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | The VBR is associated with a BGP group and cannot be deleted. | |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | You cannot delete the VBR because the VBR has advertised BGP CIDR blocks. | |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | A dependent BGP peer exists. | |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | The error message returned because the vSwitch is being used by a cloud service and cannot be deleted. Check the use scenario of the cloud service. | |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | ||
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | ||
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | |
| DependencyViolation.EIPS | The specified NAT gateway is already associated with an EIP. | |||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | An EIP is associated with the NAT gateway. Disassociate the EIP from the NAT gateway first. | |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | You cannot delete the vSwitch because a NAT gateway exists in the vSwitch. | |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | One or more specified public IP addresses are used by port forwarding rules. Delete the rules before you call this operation. | ||
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | The NAT service plan is associated with SNAT or DNAT entries. Delete them and try again. | |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | The operation failed because the FULLNAT entry depends on the NAT IP. | |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | The VPC contains endpoints and cannot be deleted. Delete the endpoints in the VPC and then delete the VPC. | |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | The error message returned because GRE tunnels are not deleted on the VPN gateway. | |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | The vSwitch is associated with an HAVIP and the vSwitch cannot be deleted. | |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | The HAVIP is associated with an EIP and cannot be deleted. | ||
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | The HAVIP serves as the next hop of a route entry and cannot be deleted. You must delete the route entry before you can delete the HAVIP. | ||
| DependencyViolation.Instance | Specified object has dependent resources | The VPC is associated with a resource. | ||
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | Instances exist in the VPC and the VPC cannot be deleted. | |
| DependencyViolation.ip | The specified NAT gateway is already associated with an EIP. | |||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | The error message returned because a prefix list is assigned to the resource. Delete the prefix list and try again. | |
| DependencyViolation.Ips | The specified EIP bandwidth plan is already associated. | |||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | An IPsec VPN server remains on the specified VPN gateway and must be deleted first. | |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | The VPC cannot be deleted because an IPv4 gateway exists in the VPC. | |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | ||
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | The IPv6 bandwidth of the specified IPv6 instance has been enabled. Release the IPv6 bandwidth after the operation. | |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | The vSwitch is added to a multicast domain and cannot be deleted. | |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | NAT gateways exist in the VPC and the VPC cannot be deleted. Delete the NAT gateways and try again. | |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with a NAT IP address. | |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with a NAT CIDR block. | |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | The specified object is associated with a network ACL. | |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | You cannot delete the vSwitch because a network ACL exists in the vSwitch. | |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | You cannot delete the VBR because nqa exists. | |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | The VPC failed to be deleted because a peer router interface exists in the VPC. | |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | ||
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | Dependent resources exist. | |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | The %s resource depends on %s. | |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | The QoS feature cannot be disabled for the NAT gateway because QoS rules are associated with the NAT gateway. | |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | The current resource is still dependent on route entries. | |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | The specified vSwitch is connected to a router interface and cannot be deleted. | ||
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with a route entry. | |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | The object is already associated with a router interface. | ||
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | The router interface is referenced as a next hop by a route entry and cannot be deleted. Delete the route entry before you can delete the router interface. | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | The VBR is already used. | |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | You cannot delete the vSwitch because a route table is associated with the vSwitch. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | Security groups exist in the VPC and the VPC cannot be deleted. Delete the security groups and try again. | |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | Security groups exist in the VPC and the VPC cannot be deleted. Delete the security groups and try again. | |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | Security group [%s] exists in the VPC and the VPC cannot be deleted. Delete the security groups and try again. | |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | ||
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | You cannot delete a vSwitch when SNAT is used. | |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | One or more specified public IP addresses are used by SNAT entries. Delete the SNAT entries before you call this operation. | ||
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | The NatIp or Ipv4Prefix is associated with one or more SnatEntry resources; delete the dependent SnatEntry first before proceeding. | |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | The error message returned because SSL-VPN connections to the specified customer gateway are not deleted. | |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | The traffic mirror session depends on the current resource. | |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | The specified resource is dependent on other resources and the current operation is not allowed. | |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | The VPC is associated with a tunnel. | ||
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | The DHCP options set is associated with a VPC and cannot be deleted. | |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with an endpoint service. | |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | The customer gateway has a VPN connection. Delete the VPN connection before you delete the customer gateway. | ||
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | The error message returned because VPN connections to the specified customer gateway are not deleted. | |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | vSwitches exist in the VPC and the VPC cannot be deleted. Delete the vSwitches and try again. | |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The error message returned because a CIDR block is reserved for the vSwitch and the vSwitch cannot be deleted. | |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | ||
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The request passed the dry run. | |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | ||
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | The IP address is duplicate. See the API reference and specify a valid IP address. | |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | ||
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | The error message returned because the specified tag key already exists. | |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | Duplicate next hops are specified. | |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | The parameter is set to a duplicate value. | |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | The error message returned because a duplicate CIDR block is specified. | |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | The system failed to add the CIDR block to the address pool because you cannot specify the CIDR block and the subnet mask at the same time. | |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | The DNAT public network port has been used repeatedly. | |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | Duplicate or occupied InternalPort parameter | |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | The local IP address already exists. | |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | The error message returned because a duplicate IP address is used for communication. Change the IP address and try again. | |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | The parameter is duplicated. | |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | The error message returned because you specified a duplicate local IP address. Change the local IP address and try again. | |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | The error message returned because you specified a duplicate local IP address. Change the local IP address and try again. | |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | The local IP address already exists. | |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | The peer IP address already exists. | |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | Duplicate IP addresses of BGP peers exist. | |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | The peer IP address already exists. | |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | Duplicate parameter value | |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | The error message returned because you specified a duplicate peer IP address. Change the peer IP address and try again. | |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | The peer IP address already exists. | |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | The specified priority is the same as an existing one. | |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | Duplicate values are set for TrafficMirrorSourceIds.N. | |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | The value of TrafficPath.N is duplicate. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | Shared physical lines bound with QoS policies do not allow cross-account virtual border routers to be created. Contact the business manager. | |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | Exclusive physical lines bound with QoS policies are not allowed to create shared physical lines. Please contact the business manager. | |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | The device where the physical connection is located does not support the QoS feature. | |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | The current failover test job task is in operation, please try again later. | |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | The failover test job can add up to 16 resources. | |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | The current user already has a failover test job in progress. Please complete it and try again. | |
| 400 | EcFailToGetAp | Fail to get access point details. | Unable to query the corresponding access point information. | |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | The Express Connect circuit is not authorized. | |
| 400 | EcNotEnoughResource | Insufficient access point resources. | Insufficient Access Point Resources | |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | Highly reliable physical lines are temporarily not supported for sale in the local region. | |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | In a single VBR and multiple Pconn scenarios, all Pconn must be bound to a QoS policy. | |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | Exclusive physical connections that contain cross-account virtual border routers cannot bind QoS policies. | |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | Exclusive physical lines that contain shared physical lines cannot be bound to QoS policies. | |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | The current QoS configuration conflicts with other configurations. Please try again later. | |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | Both IPv4 address configuration and IPv6 address configuration are not allowed in a QoS rule. If the original configuration network type is IPv4 and cannot be modified to IPv6 (or vice versa), please check and modify it. | |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | Your current QoS policy has been associated with a physical connection and cannot be deleted directly. Please disassociate it and try again. | |
| EipOperation.TooFrequently | Associating EIPs with the EIP bandwidth plan too frequently. Try again later. | |||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | |
| EIP_BIND_NATGATEWAY | The EIP is associated with a NAT gateway. | |||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | The instance is already assigned a public IP address. | ||
| EIP_NOT_SUPPORT_SNAT_POOL | The specified EIP cannot be added to the SNAT pool. | |||
| EIP_UNDERSTOCK | There are not enough eip in stock | The EIP inventory is insufficient. | ||
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | The same tunnel CIDR block exists in different IPsec tunnels that use BGP. The tunnel CIDR block is %s. | |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | The prefix %s in the VPC route table falls within the CIDR block of the IPsec client. | |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | Policy-based routes with the same prefix exist. The prefix is %s. | |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | The region does not support high availability. | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | A route with the same prefix already exists: %s | |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | There are routes with the same prefix, the prefix is %s. | |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | The prefix %s in the VPC route table falls within the CIDR block of the SSL client. | |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | The VPN gateway type does not support high availability. | |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | Only IPsec-VPN or SSL-VPN supports high availability. | |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | If the ENI is associated with an EIP in cut-through mode, you must disassociate the ENI from the ECS instance. | |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | The number of associated VBRs has reached the upper limit. | ||
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | You cannot specify %s and %s at the same time. | |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | The input parameters AccessMode.ModeValue and AccessMode.TunnelType conflict. | |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | Parameters EnableIpv6 and CidrBlock are mutually exclusive. | |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | The next-hop type does not match the next-hop instance. | |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | The input parameters PrivateLinkEnabled and AccessMode conflict. | |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | The input parameters PrivateLinkMode and AccessMode conflict. | |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | The input parameters Zone and IpAddress or InstanceId conflict. | |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | Parameters Zone and PublicIpAddressPoolId cannot be specified simultaneously. | |
| Forbbiden | The eip instance owener error | The EIP does not belong to your account. Check whether you are authorized to perform the operation on the EIP. | ||
| Forbbiden | The Router instance owener error | The router does not belong to your account. | ||
| Forbbiden | Active custom route in vpc. | You must add a custom route entry to the VPC. | ||
| Forbbiden | Specified RouteEntry cannot allowed delete by openApi. | You cannot call this operation to delete the specified route. | ||
| 400 | Forbbiden | The router does not belong to your account. | This router does not belong to your account. | |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | The user lacks permission to operate the specified resource. | |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | This router does not belong to your account. | |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | Incorrect router owner information. | |
| Forbbiden.ModifyIdAndType | Opposite is VBR | The peer is a VBR. | ||
| Forbbiden.SubUser | The specified action is not available for you. | You are not authorized to perform the operation. | ||
| Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You are unauthorized to perform this operation on the specified resource. Acquire the required permissions and try again. | ||
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | The user lacks permission to operate this resource. | |
| Forbedden.NotSupportRAM | This action does not support accessed by RAM mode. | You cannot call this operation as a RAM user. | ||
| 403 | Forbidden | User not authorized to operate on the specified resource. | You lack permission to operate the specified resource. Request permissions and retry. | |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | You lack management permissions for this resource. Request permissions and retry. | |
| 400 | Forbidden | The eip instance owener error | The EIP does not belong to the current caller. Verify whether this EIP is accessible to you. | |
| 400 | Forbidden | The eip instance owner error | The EIP does not belong to the current caller. Verify whether this EIP is accessible to you. | |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | Prepaid billing is not supported. | |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | Continuous EIP allocation failed. This service has been discontinued. Use the IP address pool service instead. | |
| Forbidden.Already.Bounded | The specified instance already bounded | The specified instance is associated. | ||
| Forbidden.AssociateToVBR | The physical connection still associate to VBR. | The physical connection has configured a virtual border router. | ||
| Forbidden.BillsOutstanding | You cannot create more RouterInterface because you have bills outstanding. | You cannot create router interfaces. You have overdue payments. | ||
| Forbidden.BillsOutstanding | You cannot use this action because you have bills outstanding. | You have uncompleted payments and cannot call this operation. | ||
| Forbidden.ChargeTypeIsPrepaid | It's forbidden to release a prepaid EIP | You cannot release subscription EIPs. | ||
| Forbidden.ChargeTypeIsPrepaid | It’s forbidden to change prepaid EIP’s bandwidth by API. It can be changed on Aliyun web console. | You cannot call an API operation to modify the bandwidth of a subscription EIP. You can modify the bandwidth in the console. | ||
| Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | An error occurred when the system was checking the quota of route entries. | ||
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to modify. | You are not allowed to modify CircuitCode. | ||
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to specify the CircuitCode parameter. | You are not allowed to specify CircuitCode. | ||
| 400 | Forbidden.Convert | User does not have permission to operate. | The user lacks permission to perform this operation. | |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | You cannot currently create a PublicIpAddressPool. Verify whether your account has been granted authorization for this operation. | |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | The user lacks permission to create cross-border routerInterfaces. | |
| Forbidden.DescriptionNotAllowedByCaller | The caller is not allowed to specify the Description parameter. | You are not allowed to set Description. | ||
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The specified private IP address does not fall within the CIDR block of the VPC. Enter a private IP address that falls within the CIDR block of the VPC. | ||
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Destination Ip is Out of VPC CIDR. | The specified private IP address does not fall within the CIDR block of the VPC. Enter a private IP address that falls within the CIDR block of the VPC. | ||
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | Disabling route propagation for this route table is not allowed. | |
| Forbidden.DiskNotFound | The specified Disk is not found | The disk does not exist. | ||
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | Deleting a contiguous EIP group is not allowed when EIPs in the group are associated with a shared bandwidth. | |
| Forbidden.EnableClassicLink | ClassicLink can be enabled for a VPC whose CIDR block is 172.16.0.0/12, 192.168.0.0/16, or 10.0.0.0/8. For more information, see Features and limits of ClassicLink. | |||
| Forbidden.ExternalIp.UsedInSnatTable | The specified ExternalIp is already used in SnatTable | The specified EIP is already used by an SNAT entry. Select a different EIP or delete the SNAT entry. | ||
| 400 | Forbidden.FinancialLocked | The instance is locked due to outstanding payments. | The instance is locked due to overdue payment and cannot be operated on. | |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | The instance is locked due to overdue payment and cannot be operated on. | |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | The router interface is locked due to overdue payment and cannot be operated on. | |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | The router interface is locked due to unsettled bills. | |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | This operation is not allowed when the router interface has overdue payments. | |
| Forbidden.FinancileLocked | This RouterInterface is financiel locked because of bills outstanding. | The router interface is locked due to overdue payments. | ||
| Forbidden.GlobalAccelerationInstanceChargeTypeIsPrepaid | You cannot release a subscription GA instance. | |||
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | You do not have permissions to manage HaVip. Apply for permissions in Quota Center. | |
| Forbidden.ImageNotFound | The specified Image is not found | This image does not exist. | ||
| Forbidden.InstanceNotFound | The specified Instance is not found | The instance does not exist. Check the instance ID. | ||
| Forbidden.InternalIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The private IP address does not fall within the CIDR block of the VPC. | ||
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | This IP address is already used by DNAT and cannot be used for SNAT. | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | This EIP cannot be used for SNAT because it is already used in a DNAT entry (any port mapping). | |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | This source IP address cannot be used because it is already used for SNAT. | |
| Forbidden.IpUsedInForwardTable | The specified SnatIp already used in forward table | The specified EIP is already used by a DNAT entry. Select another EIP or delete the DNAT rule that uses the specified EIP. | ||
| Forbidden.LocalGatewayIpNotAllowedByCaller | The caller is not allowed to specify the LocalGatewayIp parameter. | You are not allowed to specify LocalGatewayIp. | ||
| 403 | Forbidden.ModifyEipBondType | Authentication is failed for modify EIP bond type. | Modifying the EIP association type is not allowed. | |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | You do not have permissions to bind multiple direct-through EIPs. | |
| Forbidden.MultiVlanRi | Multiple vlan router interfaces are found. | Multiple VLAN router interfaces exist. | ||
| Forbidden.NameNotAllowedByCaller | The caller is not allowed to specify the Name parameter. | You do not have the permissions to set the Name parameter. | ||
| 400 | Forbidden.NatPayBySpec | Pay-by-specification NAT is no longer supported. Newly purchased pay-as-you-go NAT gateways only support the pay-by-CU metering method. | NAT gateways billed by specification are no longer available. Select a NAT gateway billed by CU usage. | |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | You do not have permissions to perform this operation. | |
| Forbidden.NoRiFound | No vlan router interfaces are found. | No VLAN router interface is available. | ||
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | The system tag is invalid. | |
| Forbidden.NotAllowedInState | The request does not allow in this state. | The operation cannot be performed when the Express Connect circuit in the current state. | ||
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | Only physical connections in the Canceled, Rejected, Terminated, Allocated, or AllocationFailed state can be deleted. | |
| Forbidden.NotInRouterInterfaceCreateWhitelist | Not in router interface create whitelist. | You are not included in the whitelist to create router interfaces. | ||
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | The VBR and physical connection are not on the same access device. | |
| Forbidden.OnlyOneConnection | Cannot connect concurrently between same routers | You cannot initiate a connection on the same router. | ||
| Forbidden.OnlyOneConnection | The Specified routers have a connection already | The router is already connected to a router interface. | ||
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | Failed to enable the IP address pool service. Apply for permissions in Quota Center. | |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | The operation is prohibited because publishing routes from custom route tables is not allowed. | |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | Authorization failed for managing managed flow logs. | |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | Operations on shared resources are not allowed. | |
| 403 | Forbidden.OperationDeleteNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | You are not authorized to delete this VBR. | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | You are not allowed to delete the VBR. | ||
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | You are not allowed to disable the VBR. | ||
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | You are not allowed to restore the VBR. | ||
| 403 | Forbidden.OperationRecoverNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | You are not authorized to restore this VBR. | |
| 403 | Forbidden.OperationTerminateNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | You are not authorized to terminate this VBR. | |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | VbrOwnerId cannot be a RAM user or partner account. | |
| Forbidden.PeerGatewayIpNotAllowedByCaller | The caller is not allowed to specify the PeerGatewayIp parameter. | You do not have permissions to set the PeerGatewayIp parameter. | ||
| Forbidden.PeeringSubnetMaskNotAllowedByCaller | The caller is not allowed to specify the PeeringSubnetMask parameter. | You are not allowed to specify PeeringSubnetMask. | ||
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | You do not have permissions to operate on PhysicalConnectionId. | |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | Only the physical port account that owns the shared port can modify these parameters. | |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | Only the physical port that owns the shared port can modify these parameters. | |
| Forbidden.RAM | User not authorized to operate on the specified resource | The RAM user is unauthorized to perform the operation. | ||
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM authentication failed. | |
| Forbidden.RegionNotFound | Specified region is not found during access authentication. | The specified region does not exist. Check whether the specified region ID is valid. | ||
| 404 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | The current Region is not supported. | |
| Forbidden.RiskControl | This operation is forbidden by Aliyun RiskControl system. | The operation is forbidden by the risk control system. | ||
| Forbidden.SecurityGroupNotFound | The specified SecurityGroup is not found | The security group does not exist. | ||
| Forbidden.SnapshotNotFound | The specified Snapshot is not found | The snapshot does not exist. | ||
| Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach it?s limit. | The number of SNAT entries has reached the upper limit. | ||
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | The number of SNAT entries has reached the quota limit. | |
| Forbidden.SourceVSwitchId.Duplicated | The specified SourceCIDRis duplicated. | An SNAT entry is already created for the specified vSwitch. | ||
| 400 | Forbidden.SourceVSwitchId.IncludeHaVip | There is some HaVips under specified VSwitch | HaVip is associated with this vSwitch. | |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You do not have permissions to operate on this resource. Apply for required permissions and try again. | |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | Tag resource duplication. | |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | You do not have permissions to operate on TagKeys. | |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | This request is not allowed to operate on the specified tagkey. | |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | Deleting the VPC is not allowed because TR connections still exist. | |
| Forbidden.UnassociateMaster | Unassociating a master instance is not allowed unless the parameter Force is True. | You cannot disassociate the HAVIP from a primary instance when Force is set to False. | ||
| Forbidden.VbrAttached | cannot terminate physical connection when virtual border routers are still attached. | Failed to disable the Express Connect circuit because the Express Connect circuit is associated with a VBR. | ||
| Forbidden.VBRExists | physical connection owner's vbr still exists. | The VBR of the Express Connect circuit still exists. | ||
| Forbidden.VBRExists | vbr owner's vbr still exists. | The VBR still exists. | ||
| 400 | Forbidden.VBRExists | The vbr still exists. | The VBR still exists; the port cannot be deleted. | |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | Modifying cross-region connections for the VBR is not allowed. Apply for permissions. | |
| Forbidden.VlanIdNotAllowedByCaller | The caller is not allowed to specify the VlanId. | You are not allowed to specify the VLAN ID. | ||
| 400 | Forbidden.VpcNotFound | Specified VPC can not found. | The specified VPC does not exist. Verify that the VPC is correct. | |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | The shared port UID cannot be a RAM user or partner account. | |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | The specified vSwitch was not found during access authorization. | |
| ForbiddenAction | The user dose not supported this action. | You are not authorized to perform this operation. | ||
| 400 | ForbiddenAction | The user does not supported this action. | User permissions are not supported. | |
| 400 | ForbiddenAction | The user does not support this action. | You do not have the required permissions. | |
| ForbiddenRelease | Forbidden to release a prepaid instance within validity period | You cannot release a subscription VPN gateway within the subscription duration. | ||
| FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | The specified CIDR block must be a subset of the VPC CIDR block. | ||
| Forbindden | The specified Instance already bind eip | The ECS instance is associated with an EIP. Disassociate the EIP from the ECS instance before you create forwarding rules. | ||
| ForwardEntry.Duplicated | The specified ExternalIp | The IP address already exists. Enter a new IP address. | ||
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | Frequent EIP purchases and releases have been detected recently. New EIP purchases are temporarily unavailable. | |
| FUWU_BIZ_COMMODITY_VERIFY_FAIL | 你购买的模块非法 | The module that you purchased is invalid. | ||
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | Failed to query secondary ENI information. | |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | A connection has already been established between the two routers. | |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | The status parameter is invalid. | |
| 400 | Idempotence.Processing | Idempotence request is processing. | The idempotent request is being processed. | |
| IdempotentParameterMismatch | Request uses a client token in a previous request but is not identical to that request. | The client token used in the request is invalid. | ||
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | The specified OwnerAccount parameter is invalid. | |
| 400 | IllegalParam.%s | The param of %s is illegal. | The specified parameter is invalid. | |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | The AccessMode.ModeValue parameter in the request is invalid. | |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | The AccessMode.TunnelType parameter in the request is invalid. | |
| 400 | IllegalParam.Action | The specified Action is invalid. | The action parameter is invalid. | |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | The specified address pool type is invalid. | |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | The specified AddressType input parameter is invalid. | |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | The sampling interval parameter is invalid. | |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | Invalid parameter: when DNAT forwarding protocol is Any, source port and destination port must both be 0. | |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | The specified ASN is invalid. | |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | The AssociatedInstanceId parameter is invalid. | |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | The specified AssociatedPhysicalConnections parameter is invalid. | |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | The Attachment is invalid. | |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | At least one authentication method (Psk or IDaas) must be specified. | |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | The specified bandwidth is invalid. | |
| 400 | IllegalParam.Bandwidth | The param of Bandwidth [%s] is illegal. | The specified bandwidth is invalid. | |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | The Bandwidth parameter is invalid. | |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | The Bandwidth parameter is invalid. | |
| 400 | IllegalParam.Bandwidth | [%s] | The physical connection bandwidth value [%s] is invalid. | |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | The physical connection bandwidth value is invalid. | |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | The specified Bandwidth is invalid. Refer to the API documentation for parameter details and retry. | |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | The LocalAsn of the VBR must match the ASN of the ECR. | |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | The Alibaba Cloud-side BGP AS number of the BGP group must match the AS number of the ECR. | |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | The ChargeType you entered is invalid. Refer to the API documentation for parameter details and retry. | |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | The ChargeType parameter is invalid. | |
| 400 | IllegalParam.CidrBlock | The param of (%s) is illegal. | The CIDR block is invalid. | |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | The CidrBlock parameter is invalid. | |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | The cidrBlock parameter is invalid. | |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | The CidrBlock is invalid. | |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | The CidrBlock parameter is invalid. | |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | The CidrBlock mask is invalid. | |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | The specified CIDR block mask is invalid. | |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | The input cidrName is invalid. | |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | The client CIDR block (%s) is invalid. | |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | The ClientToken parameter is invalid. | |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | The company localized name [%s] is invalid. | |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | The company localized name is invalid. | |
| 400 | IllegalParam.CompanyName | [%s] | The company name [%s] is invalid. | |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | The company name is invalid. | |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | The cross-region bandwidth package is invalid. | |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | The specified Day input parameter is invalid. | |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | The Description parameter is invalid. Please re-enter according to the request parameter requirements. | |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | The Description parameter is invalid. | |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | The specified destination address is invalid. | |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | The DestinationCidrBlock parameter is invalid. | |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | Invalid parameter: destination CIDR. | |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | The DetectMultiplier parameter is out of the valid range. | |
| 400 | IllegalParam.DhcpOptionsSetDescription | The specified DhcpOptionsSetDescription is invalid. | The specified DhcpOptionsSetDescription parameter is invalid. Please verify this parameter. | |
| 400 | IllegalParam.DhcpOptionsSetName | The specified DhcpOptionsSetName is invalid. | The specified DhcpOptionsSetName parameter is invalid. Please verify this parameter. | |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName parameter is invalid. Please verify this parameter. | |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName is invalid. | |
| 400 | IllegalParam.DomainNameServers | The specified DomainNameServers is invalid. | The specified DomainNameServers parameter is invalid. Please verify this parameter. | |
| 400 | IllegalParam.EgressAclEntryId | The specified EgressAclEntryId is invalid. | The outbound ACL rule ID is invalid. | |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | When BGP is enabled on the VPN gateway, BGP must also be enabled on the VPN connection. | |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | When Ipv6CidrBlock is specified, EnableIpv6 cannot be False. | |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | The EnableIpv6 parameter is invalid. | |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | The filter key parameter is invalid. | |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | The filter value parameter is invalid. | |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | The filter parameters do not support specifying only ResourceId or ResourceName without ResourceType. | |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | The input GatewayType is invalid. | |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | The health check IP is invalid. | |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | The health check IP cannot be the same as the instance IP. | |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | The specified IDaaS application instance ID is invalid. The application instance must be created based on a dedicated SSL VPN template. | |
| 400 | IllegalParam.IngressAclEntryId | The specified IngressAclEntryId is invalid. | The inbound ACL rule ID is invalid. | |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | The VBR switchover group instance parameter is invalid. | |
| 400 | IllegalParam.InstanceType | The specified instance type is invalid. Only ECS instances and network interface are allowed. | The bound instance type is not allowed. | |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | The InstanceType parameter is invalid. | |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | The specified InternetChargeType is invalid. Refer to the API documentation for parameter descriptions and modify it before retrying. | |
| 400 | IllegalParam.IpAddress | The specified IP address (%s) is illegal. | The IP address is invalid. | |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | The IpAddress parameter is invalid. | |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | The specified IP address format is invalid. Modify it according to the parameter description in the API documentation and retry. | |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | The specified IpAddress is invalid. | |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | The IPAM pool cannot be empty. | |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | The specified Ipv4CidrMask is invalid. | |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | The IPv6 address is invalid. | |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | The specified IPv6 address is invalid. Check whether your input is correct. | |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | The IPv6 instance ID is invalid. | |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | The specified Ipv6CidrBlock is invalid. | |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | The IPv6 CIDR block is invalid. | |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | The Ipv6CidrBlock parameter is invalid. | |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | The IPv6CidrType parameter is invalid. | |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | The specified Ipv6Isp parameter is invalid. | |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | The specified Ipv6Prefix input parameter is invalid. | |
| 400 | IllegalParam.ipVersion | The IP version does not match. | IP version mismatch. | |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | The IP version in the parameter is invalid. | |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | Invalid parameter: IpVersion. | |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | The IpVersion parameter is abnormal. Verify the parameter and retry. | |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | The IpVersion parameter is invalid. | |
| 400 | IllegalParam.Isp | The param of %s is illegal. | EIP allocation failed because the ISP parameter is invalid. | |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | The Isp parameter is invalid. Re-enter it according to the request parameter requirements. | |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | The specified fault injection task duration is invalid. | |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | The specified fault injection task ID is invalid. | |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | The specified task type is invalid. | |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | The specified LeaseTime parameter is invalid. | |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | The physical connection ISP maintenance contact information is invalid. | |
| 400 | IllegalParam.LineType | [%s] | The physical connection type [%s] is invalid. | |
| 400 | IllegalParam.LineType | Invalid LineType. | The physical connection type is invalid. | |
| 400 | IllegalParam.LocalAsn | The specified LocalAsn is invalid. | The local autonomous system number (ASN) is invalid. | |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | The LocalAsn parameter is invalid. | |
| 400 | IllegalParam.LocalBgpIp | The specified LocalBgpIp is invalid. | The local BGP address is invalid. | |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | The local gateway IP address and subnet mask are invalid. Correct them and retry. | |
| 400 | IllegalParam.LocalSubnet | The specified "LocalSubnet" (%s) is invalid. | The local CIDR block (%s) is invalid. | |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | The ProjectName and LogStoreName parameters are invalid. They must be provided together or omitted together. | |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | The MaxResults parameter is invalid. | |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | The specified MinRxInterval is out of the valid range. | |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | The specified MinTxInterval is out of the valid range. | |
| 400 | IllegalParam.Mode | The specified value of the parameter Mode is invalid. | The value of the Mode parameter is invalid. | |
| 400 | IllegalParam.Mode | The specified Mode is invalid. | The Mode input parameter is invalid. | |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | The Mode parameter is invalid. | |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | The Name parameter is invalid. Re-enter it according to the request parameter requirements. | |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | The NatIpPort parameter is invalid. | |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | The NetworkInterfaceId parameter is invalid. | |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | The network type is invalid. | |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | The NetworkType parameter is invalid. | |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | The specified NetworkType is invalid. Check whether your input is correct. | |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | IllegalParam.NextTokenExpired | The specified NextToken is invalid. | The NextToken parameter is invalid. | |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | The NextTokenExpired parameter is invalid. | |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | You have not completed real-name verification, which is required for purchase. Please log in to the User Center to complete real-name verification. | |
| 400 | IllegalParam.OrderKey | The specified OrderKey is invalid. | The OrderKey parameter is invalid. | |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | |
| 400 | IllegalParam.OrderType | The specified OrderType is invalid. | The OrderType parameter is invalid. | |
| 400 | IllegalParam.OwnerAliUid | The specified AliUid is invalid. | The user ID is an invalid parameter. | |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The VbrOwnerId parameter is invalid. | |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The Alibaba Cloud user ID of the resource owner is invalid. | |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | The PeerAsn parameter is invalid. | |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | The subnet mask is invalid. Correct it and retry. | |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | The peerIpAddress parameter is invalid. | |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | The peer IP address is invalid. | |
| 400 | IllegalParam.PeerLocation | [%s] | The geographical location [%s] of the physical connection is invalid. | |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | The geographical location of the physical connection is invalid. | |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | The PmCertificateNo parameter is invalid. | |
| 400 | IllegalParam.PmCertificateNo | [%s] | The construction engineer’s identification number [%s] is invalid. | |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | The construction engineer’s identification number is invalid. | |
| 400 | IllegalParam.PmCertificateType | [%s] | The construction engineer’s identification type [%s] is invalid. | |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | The construction engineer’s identification type is invalid. | |
| 400 | IllegalParam.PmContactInfo | [%s] | The construction engineer’s contact information [%s] is invalid. | |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | The construction engineer’s contact information is invalid. | |
| 400 | IllegalParam.PmGender | [%s] | The construction engineer’s gender [%s] is invalid. | |
| 400 | IllegalParam.PmGender | Invalid PmGender. | The construction engineer’s gender is invalid. | |
| 400 | IllegalParam.PmName | [%s] | The construction engineer’s name [%s] is invalid. | |
| 400 | IllegalParam.PmName | Invalid PmName. | The construction engineer’s name is invalid. | |
| 400 | IllegalParam.Policy | Param Policy illegal. | Invalid parameter: Policy. | |
| 400 | IllegalParam.PortRange | The specified port range is invalid. | The port range parameter is invalid. | |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | The priority parameter is invalid. | |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | The specified Priority is invalid or conflicts with another mirror session. | |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | The specified PrivateIpAddress is invalid. Check the parameter constraints and try again after modification. | |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | The ProductType parameter is invalid. | |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | The Protocol parameter is invalid. | |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | Invalid parameter: Protocol. | |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | The regionId is invalid. | |
| 400 | IllegalParam.RemoteSubnet | The specified "RemoteSubnet" (%s) is invalid. | The peer CIDR block (%s) is invalid. | |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | The ReservedCidrMask parameter is invalid. Enter a valid value according to the API specification. | |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | The specified resource group is invalid or does not exist. | |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | The input resource ID parameter is invalid. | |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | The resource owner UID parameter is invalid. | |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | The specified ResourceType is unsupported or invalid. | |
| 400 | IllegalParam.ResourceType | Invalid %s value. | The input ResourceType parameter is invalid. | |
| 400 | IllegalParam.Role | The specified Role is invalid. | The Role parameter is invalid. | |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | The destination address is invalid. | |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | Duplicate route CIDR blocks exist. | |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | The specified route name is invalid. | |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | The specified route entry type does not conform to specifications. | |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | The RouteEntryType parameter is invalid. | |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | The number of route entries accepted by each BGP neighbor in the BGP group exceeds the quota. | |
| 400 | IllegalParam.SecondaryCidrBlock | SecondaryCidrBlock is illegal. | The additional CIDR block parameter is invalid. | |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | The SecondaryCidrBlock parameter is invalid. | |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | The specified SecondaryCidrMask is invalid. | |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | The input SecurityProtectionTypes parameter is invalid. | |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | The ServiceLocation parameter is invalid. | |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | The ServiceProvider parameter is invalid. | |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | The session log delivery destination parameter (SessionLogDeliveryDestination) has an invalid format. | |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | The session log delivery destination type parameter (SessionLogDeliveryType) does not meet requirements. | |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | The ShareType parameter is invalid. | |
| 400 | IllegalParam.Si | [%s] | The physical connection construction unit [%s] is invalid. | |
| 400 | IllegalParam.Si | Invalid Si. | The physical connection construction unit is invalid. | |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | The SourceCidrBlock parameter is invalid. | |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | Invalid parameter: source CIDR. | |
| 400 | IllegalParam.Spec | The parameter Spec is illegal. | The Spec is invalid. | |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | The Spec is invalid. | |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | The ExpectSpec parameter is invalid. | |
| 400 | IllegalParam.Spec | The spec is illegal. | The spec is invalid. | |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | The Spec parameter is invalid. | |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | The TargetType parameter is invalid. | |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | The traffic mirror filter rule instance ID parameter is invalid. | |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | The input trafficPath parameter is invalid. | |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | The TunnelCidr parameter is invalid. | |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | The TunnelId parameter is invalid. | |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | The Type parameter is invalid. | |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | The access point type does not support creating highly reliable physical connections. | |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | The UserCidr is invalid. | |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | The UserCidr parameter is invalid. | |
| 400 | IllegalParam.VlanId | The parameter VlanId is illegal. | The VlanId parameter is invalid. | |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | The VlanId is invalid. | |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | The VlanId is already in use. | |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | The VpcIPv6CidrBlock parameter is invalid. | |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | The AliUid of the Vpconn is invalid. | |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | The AliUid parameter of the Vpconn is invalid. | |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | The VRouterType is invalid. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | The VSwitchCidrReservationMask parameter is invalid. Refer to the API documentation for parameter descriptions and retry. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 1. | |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | The specified VSwitchCidrReservationMask must be at least 2 bits larger than the VSwitch mask. | |
| 400 | IllegalParam.Zone | The specified zone is invalid. | The Zone parameter is invalid. | |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | The ZoneId parameter is invalid. | |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | The Zones parameter is invalid. | |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | The LocalGatewayIpAndMask parameter is invalid. | |
| 400 | IllegalParamFormat | IllegalParamFormat | The parameter format is incorrect. | |
| 400 | IllegalParamFormat | The param of %s is illegal. | The specified parameter is invalid. | |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | The mode parameter is invalid. | |
| 400 | IllegalParamFormat.Description | The specified description is invalid. | The Description parameter format is invalid. | |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | The destination CIDR format is incorrect. | |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | The destination CIDR parameter format is invalid. | |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | The destination port range parameter format is invalid. | |
| 400 | IllegalParamFormat.Name | The specified Name is invalid. | The Name parameter format is invalid. | |
| 400 | IllegalParamFormat.NatIp | The param format of %s[%s] is illegal. | The NatIp format is incorrect. | |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | The input NatIpCidr parameter is invalid. | |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | The OutIp parameter format is invalid. | |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | The CIDR format is invalid. | |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | The source CIDR parameter format is invalid. | |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | The source port range parameter format is invalid. | |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | The VSwitchCidrReservationCidr parameter format is invalid. | |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | The AssociatedInstanceId parameter length is invalid. | |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | The outbound filter rule count is invalid. | |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | The inbound filter rule count is invalid. | |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | The number of traffic mirror filter rule parameters is invalid. | |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | Invalid size of Zones array. | |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | Invalid next-hop type in the route entry. | |
| IncorrcetRouteEntryStatus | Some route entry status blocked this operation. | One or more routes in the route table are in the Pending or Modifying state. | ||
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | The current service status does not support creating a flow log instance. | |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | The physical connection is overdue; this operation is not allowed. | |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | The current service status does not support creating an IP address pool instance. | |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | The specified resource is overdue. | |
| 400 | IncorrectBusinessStatus.TrafficMirror | The business status of traffic mirror is incorrect. | The commercial status of the traffic mirror is invalid. | |
| 404 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | ClassicLink is already enabled for this VPC. | |
| IncorrectEipStatus | Current elastic IP status does not support this operation | The status of the EIP does not support the operation. | ||
| IncorrectEipStatus | Current elastic IP status does not support this operation. | You cannot perform the operation when the specified EIP is in the current state. | ||
| IncorrectGlobalAccelerationInstanceIdStatus | Current GlobalAccelerationInstance status does not support this operation. | The GA instance in this state does not support this operation. | ||
| IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is InUse. | The operation can be performed only when the HAVIP is in the InUse state. | ||
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | The operation cannot be performed because the HaVip status is Available or InUse. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it’s status is Available or InUse. | This operation is allowed only when the HaVip status is Available or InUse. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | This operation is allowed only when the HaVip status is Available or InUse. | |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | The HaVip instance must be in Available or InUse status to perform this operation. | |
| IncorrectInstanceStatus | The current status of instance does not support this operation. | This operation cannot be performed while the instance is in the current state. | ||
| IncorrectInstanceStatus | The current status of the resource does not support this operation. | The specified resource is in a state that does not support the operation. | ||
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it’s status is Running or Stopped. | The operation can be performed only when the ECS instance is in the Running or Stopped state. | ||
| IncorrectInstanceStatus | Current instance status does not support this operation. | This operation cannot be performed while the instance is in the current state. | ||
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it's status is Running or Stopped. | You can do this operation only when the ECS instance is running or stopped. | ||
| IncorrectOppositeInterfaceInfo | Cannot connect on the same router | You are not allowed to connect to the same router. | ||
| IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId is wrong. Maybe the RouterInterface or Router does not exist | Based on the configuration of OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId, the value of OppositeRouterInterface is invalid. The router or router interface may not exist. | ||
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | The opposite router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. The RouterInterface or Router may not exist, parameters may mismatch, or the RouterInterface may not be the acceptor. | |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The opposite router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The opposite router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | |
| IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId must be all set. | You must set the following parameters: OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId. | ||
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be set. | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | Parameters OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be set. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | This operation is allowed only when the router interface status is Active. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | This operation is allowed only when the router interface status is Idle. | |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | This operation is allowed only when the router interface status is Inactive. | |
| IncorrectRole.NotInitiatingSide | The specified RouterInterface is not InitiatingSide. | The specified router interface is not an initiator. Select an initiator router interface. | ||
| IncorrectRouteEntryStatus | Vpc NotStable route entry. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| IncorrectRouteEntryStatus | The vpc has NotStable routeEntry status. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| IncorrectRouteEntryStatus | VBR has NotStable route entry. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| IncorrectRouteEntryStatus | Specified routeEntry status error. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| IncorrectRouteEntryStatus | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | ||
| 404 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | The current route table status does not support deletion. | |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | The specified route table cannot be deleted because it still contains custom route entries. | |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | This operation is allowed only when the route table type is Custom. | |
| IncorrectStatus | RouterInterface can be operated by this action only when the status is Active | The operation can be performed only when the the router interface is in the Active state. | ||
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Inactive. | The operation can be performed only when the router interface is in the Inactive state. | ||
| IncorrectStatus | RouterInterface can be operated by this action only when it’s status is Idle. | The operation can be performed only when the router interface is in the Idle state. | ||
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Active. | The operation can be performed only when the the router interface is in the Active state. | ||
| 400 | IncorrectStatus | HaVip can be deleted only when it is status is Available. | HAVIP deletion failed; only HAVIPs in Available status can be deleted. | |
| IncorrectStatus | This openeration would be allowed only when status of this RouterInterface is Idle/Inactive. | You cannot perform the operation. You can perform the operation only when the router interface is in the Idle or Inactive state. | ||
| IncorrectStatus | Vswtich status not stable. | The VSwitch is in the status of Pending or Modifying. Please try again later. | ||
| 400 | IncorrectStatus | HaVip can be deleted only when status is Available or InUse. | HAVIP deletion failed; the HAVIP status is unsupported. | |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | This operation is allowed only when the router interface status is Active, Idle, or Inactive. | |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | The specified instance status is invalid. | |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | The BgpPeer status is invalid and cannot run. | |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | The BondRi status is unstable; confirm the instance status and retry. | |
| 400 | IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The CBN status is invalid. | |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | Operation failed: the VPC status in CEN has not reached a stable state. | |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | Check the CEN status. | |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | The current reserved CIDR block status does not support this operation; please retry later. | |
| 400 | IncorrectStatus.DhcpOptionsSet | The DhcpOptionsSet status does not support this operation. | The DHCP options set instance is in an intermediate state and cannot be operated; wait until it reaches a stable state. | |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | The specified EgressOnlyRule status does not support deletion. | |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | The specified IPv6EgressOnlyRule is not in a stable state. | |
| 400 | IncorrectStatus.Eip | An EIP status error occurred. | Invalid EIP status. | |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | The EIP status is invalid. | |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | Invalid flow log status; stopping is not allowed. | |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | The DNAT entry instance status is invalid for deletion. | |
| 400 | IncorrectStatus.FullNatEntry | The status of %s [%s] is incorrect. | The FullNatEntry status is invalid. | |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | The specified gateway route table instance is not in a stable state; please retry later. | |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | The instance status is invalid. | |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | The IP status is invalid. | |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | The IPv4Gateway status is unstable. | |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | The specified IPv4Gateway is unstable; please retry later. | |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | The specified IPv6 address of the next hop is currently being created or deleted. | |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | The specified IPv6Gateway is unstable; please retry later. | |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | The specified IPv6Instance is unstable; please retry later. | |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | The IPv6 public bandwidth status does not support creating IPv6 egress-only rules. | |
| 400 | IncorrectStatus.NatGateway | The status of NAT gateway is incorrect. | The NAT gateway status is invalid. | |
| 400 | IncorrectStatus.NatGateway | The status of natgateway is incorrect. | The NAT gateway status is invalid. | |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | The NAT gateway status is invalid. | |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | The NAT gateway instance is being deleted; duplicate deletion is not allowed. Wait for deletion to complete. | |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | The specified NatGateway is not in a stable state. | |
| 400 | IncorrectStatus.NATGW | The status of the specified NAT gateway is abnormal. | The NAT gateway status is abnormal. | |
| 400 | IncorrectStatus.NATGW | NATGW status is invalid. | The NAT gateway status is invalid. | |
| 400 | IncorrectStatus.NatIp | The status of %s [%s] is incorrect. | The current status of the NatIp is invalid. | |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The ENI status is invalid. | |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The current ENI status does not support this operation. Please try again later. | |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | The specified next-hop resource is in an unstable state. | |
| 400 | IncorrectStatus.null | RouterInterface status is null. | The RI status is empty. | |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | Only fault simulation tasks in the Pending state can be modified or started. | |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | Only fault simulation tasks in the Pending or Completed state can be deleted. | |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | Only fault simulation tasks in the In Progress state can be terminated. | |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | The current physical connection status is abnormal; this operation cannot be performed. | |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in the Allocated state. | The physical connection status is invalid. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of PhysicalConnection is incorrect. | The PhysicalConnection status is invalid. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s is incorrect. | The PhysicalConnection status is invalid. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of [%s] is incorrect. | The PhysicalConnection status is invalid. | |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | The specified PhysicalConnectionId is not in the Allocated state. | |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | The instance status is invalid. | |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | The physical connection [%] status is abnormal. | |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | The physical connection status is abnormal. | |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | The physical connection construction status [%s] is abnormal. | |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | The physical connection construction status is abnormal. | |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | The PrefixList is in an intermediate state and cannot be operated. | |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | EIP allocation failed because the IP address pool status is invalid. | |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | The address pool instance is not in a stable state; EIP allocation is not allowed. | |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | The current QoS policy status is abnormal; the operation cannot be performed. Please try again later. | |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | The status of the resource corresponding to the input resource ID is invalid. | |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | The route entry is in an unstable state. | |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | The route advertisement status of the route entry is invalid. | |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | The route table propagation status has not reached a stable state; please try again later. | |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | The current status of the RouterEntry is invalid. | |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because status of this RouterInterface is not correct. | The current instance status does not allow deletion; please wait for the status to change and try again. | |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because the status of this RouterInterface is not correct. | The current instance status does not allow deletion; please wait for the status to change and try again. | |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | The router interface status is abnormal. | |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | The specified route table status is invalid. | |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | The specified route table status is invalid. | |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | The specified route table is not in a stable state. | |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | The PrefixList cannot be operated. | |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | The traffic mirror filter condition status is invalid. | |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | The traffic mirror filter rule status is invalid. | |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | The traffic mirror session status is invalid. | |
| 400 | IncorrectStatus.VBR | The status of VBR is incorrect. | The VBR status is invalid. | |
| 400 | IncorrectStatus.VbrId | The status of %s is incorrect. | The VBR instance status is invalid. | |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | The shared physical connection [%s] status is invalid. | |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | The current instance status is not stable. | |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | The VPC is not in a stable state. | |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | The VPC is not in a stable state. | |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | The specified VPC is not in a stable state. | |
| 400 | IncorrectStatus.VpcDhcpOptionsSet | The dhcpOptionsSet status of VPC does not support this operation. | The DHCP options set bound to the current VPC is in an intermediate state and cannot be operated. | |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | The DHCP options set instance in the current VPC does not support VPC deletion. | |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | The private domain name status of the current VPC does not support this operation. | |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | The status of %s[%s] is invalid. | |
| 400 | IncorrectStatus.VpcRouteEntry | The status of the specified routeEntry is invalid. | The VPC route entry status is invalid. | |
| 400 | IncorrectStatus.VSWITCH | The status of the specified VSwitch is invalid. | The vSwitch status is abnormal. | |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | The specified vSwitch is in an unstable state. | |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | The vSwitch status is abnormal. | |
| IncorrectVpcStatus | Current VPC status does not support this operation. | This operation cannot be performed when the VPC is in the current state. | ||
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | The specified vSwitch instance was not found during permission verification. | |
| IncorrectVSwitchStatus | VSwitch Creation simultaneously is not supported. | The system failed to create the vSwitch and one or more vSwitches that belong to the VPC are in the Creating state. | ||
| 400 | IncorrectVSwitchStatus | Some virtual switch is modifying within the same VPC. | Multiple vSwitches are in the Modifying state within the same VPC; please try again later. | |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | The vSwitch is in the Pending state and cannot be deleted. | |
| IncorretForwardEntryStatus | Some Forward entry status blocked this operation.. | The operation is not supported because one or more DNAT entries in the DNAT table are in the Pending or Modifying state. | ||
| IncorretForwardEntryStatus | The Specified forwardEntry is not stable status | The status of the DNAT entry is unstable. | ||
| IncorretForwardEntryStatus | The Specified forwardEntry is not exist | The specified DNAT entry does not exist. | ||
| IncorretRouteEntryStatus | You cannot create a route because vSwitches in the VPC are in the Adding, Modifying, or Deleting state. | |||
| IncorretSnatEntryStatus | Some Snat entry status blocked this operation.. | One or more SNAT entries in the SNAT table are in the Pending or Modifying state. | ||
| IncorretSnatEntryStatus | The Specified SnatEntry is not stable status | The SNAT entry is in an unstable state. | ||
| IncorretVSwitchStatus | The system failed to create vSwitches because some vSwitches are in the Pending state. | |||
| 400 | InnerError | Internal system error. | Internal system error. | |
| 404 | Instance.NotExist | The instance not exist. | The instance does not exist. | |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | The instance status is not allowed. | |
| 400 | Instance.StatusError | The status of instance error. | The instance status is invalid. | |
| 400 | InstanceExist.NatgwScheduledMigration | The scheduled migration information of the NAT gateway already exists. | The NAT gateway scheduled migration information already exists. | |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | The NAT gateway instance does not exist. | |
| 400 | InstanceNotExist.NATGWSchedule | The scheduled migration information of the NAT gateway does not exist. | The NAT gateway scheduled migration information does not exist. | |
| 404 | InstanceNotExists | Instance not exists. | The instance to be deleted does not exist. | |
| INSTANCE_HAS_INACTIVE_CHANGE | The system is processing changes. | |||
| InsufficientBalance | Your account does not have enough balance. | Your account balance is insufficient. Top up your account and try again. | ||
| InsufficientBalance.Eip | Your account does not have enough balance. | Your account balance is insufficient. Top up your account and try again. | ||
| InsufficientEipCapacity | Insufficient EIP capacity to fulfill your request. | The EIP quota is insufficient. | ||
| INSUFFICIENT_BALANCE | The account balance is insufficient. | |||
| InternalError | The request processing has failed due to some unknown error | An unknown error occurred. | ||
| 400 | InternalError | The request processing has failed due to some unknown error. | The request failed due to an unknown error. | |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | Internal error. | |
| 500 | InternalError | Internal system error. | Internal system error. | |
| 400 | INVAID.VBR.STATUS | VBR status must be active | Invalid VBR status. | |
| 400 | Invalid.Grant | Can not grant to other owner cen. | The VBR cannot be authorized across accounts to another CEN. | |
| Invalid.natgwNotExist | The specified natgateway not exist. | The specified NAT gateway does not exist. | ||
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | Invalid parameter Status. | |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | The specified AccessKey was not found. | |
| InvalidAccessPoint.NotExist | The accessPoint not exit | The access point does not exist. | ||
| InvalidAccessPoint.NotMatch | The accessPoint id is not matched | The specified ID of the access point is invalid. | ||
| InvalidAccessPoint.ValueNotAllowed | The non-vbr router interface cannot have access point configured. | You cannot configure access points for the router interface of a vRouter. | ||
| InvalidAccessPoint.ValueNotAllowed | The non-vbr opposite router interface cannot have opposite access point configured. | You cannot configure access points for the router interface of a non-VBR router. | ||
| 400 | InvalidAccessPointId.NotEnabled | Invalid access point status. | Insufficient resources are available in the current access point. Contact your business manager. | |
| InvalidAccessPointId.NotFound | The AccessPointId provided does not exist in our records. | AccessPointId is set to an invalid value. | ||
| 400 | InvalidAccount.NotFound | The account is invalid. | Operation failed: an invalid calling account was used. | |
| 400 | InvalidAction.Denied | Action is denied due to unfinished Eip configuration modification. | Operation denied because EIP configuration modification is incomplete. | |
| 400 | InvalidAliuid | Invalid Aliuid. | Invalid Aliuid. | |
| InvalidAllocationId.NotFound | Specified allocation id is not found. | The error message returned because the specified EIP does not exist. Check whether the value of the parameter is valid. | ||
| InvalidAllocationId.NotFound | Specified allocation ID is not found.. | The specified EIP does not exist. Check whether the value of the parameter is valid. | ||
| 404 | InvalidAllocationId.NotFound | Specified allocation ID is not found | The specified public IP address does not exist. Verify the parameter you entered. | |
| InvalidAssociation.Duplicated | Specified instance already is associated. | An EIP or a GA instance is already associated with the specified instance. You must disassociate the EIP or GA instance from the specified instance before you can perform the operation. | ||
| 400 | InvalidAttachment.NotFound | The attachment is not found. | Attachment does not exist. | |
| 400 | InvalidAuthkey.Malformed | The specified BGP authentication key (%s) is malformed. | The specified BGP authentication key is invalid. | |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | No available resources in the current zone. | |
| InvalidBackendServerId.NotFound | The specified BackendServerId is not found. | The backend server instance does not exist. | ||
| InvalidBackendServerId.NotInVPC | The specified BackendServerId is not in VPC. | BackendServerId is not a VPC ID. | ||
| InvalidBackendServerRegionId.EqualRegionId | The specified BackendServerRegionId can not be the same as RegionId. | You cannot specify the same value for BackendServerRegionId and RegionId. | ||
| InvalidBackendServerRegionId.Mismatch | The specified BackendServerRegionId is not in the GlobalAccelerationInstance’s ServiceLocation. | The region specified by the BackendServerRegionId parameter does not belong to the service regions of the GA instance. | ||
| InvalidBackendServerRegionId.NotFound | The specified BackendServerRegionId is not found. | The specified backend server region ID does not exist. | ||
| InvalidBackendServerType.NotFound | The specified BackendServerType is not supported. | The specified backend server type is not supported. | ||
| InvalidBandwidth | invalid physical connection banwidth. | The specified maximum bandwidth of the Express Connect circuit is invalid. | ||
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | Insufficient bandwidth packages. | |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | Insufficient bandwidth in the bandwidth plan. | |
| InvalidBandwidth.ValueNotSupported | The specified value of Bandwidth not supported. | The specified maximum bandwidth value is invalid. | ||
| 400 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackageId does not exist in our records. | The specified bandwidth package ID does not exist. | |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | The specified shared bandwidth package does not exist. | |
| 400 | InvalidBandwidthPackageIdNumber.NotSupported | The number of BandwidthPackageIds exceeds the limit. | The number of shared bandwidth packages exceeds the quota limit. | |
| InvalidBgpAuthkey.Malformed | Specified Bgp Group authkey is not valid. | The authentication key of the BGP group is invalid. | ||
| InvalidBgpDescription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | ||
| InvalidBgpDiscription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | ||
| InvalidBgpGroup | bgp group not exists | The BGP group does not exist. | ||
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | The VBR is already associated with a dedicated gateway; modifying the local AS is not allowed. Disassociate the dedicated gateway first. | |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | The specified BgpGroup LocalAsn is invalid. Valid values are 64512–65534 or 420000000–4294967294. | |
| InvalidBgpName.Malformed | Specified Bgp Group name is not valid. | The name of the BGP group is invalid. | ||
| InvalidBindingStatus | The eip binding status invalid. | The EIP is in an invalid state. | ||
| InvalidChargeType.ValueNotSupported | The specified ChargeType is not supported. | The specified billing method is not supported. Specify a supported billing method. | ||
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | Possible causes: | |
| InvalidCidrBlock | Specified CIDR block is already exists. | The vSwitch CIDR block overlaps with another vSwitch CIDR block or with the destination CIDR block of a custom route entry. Try a different CIDR block that is not in use. | ||
| InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | This CIDR block already exists in the routing table. | ||
| InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | The format of the CIDR block is invalid. | ||
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other subnets. | The vSwitch CIDR block overlaps with another vSwitch CIDR block or with the destination CIDR block of a custom route entry. Try a different CIDR block that is not in use. | ||
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other entry. | The specified CIDR block overlaps the CIDR block of another VPC or a custom routing destination. Select a CIDR block that is not used. | ||
| InvalidCircuitCode.Malformed | The specified CircuitCode is not valid. | CircuitCode is set to an invalid value. | ||
| InvalidCircuitCode.Malformed | circuitCode is illegal. | The error message returned because CircuitCode is set to an invalid value. | ||
| 400 | InvalidCirdrBlock.MaskLength | Specified CIDR block is not valid . | The CIDR block format is invalid. | |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | The client CIDR block conflicts with other resources in the VPC. | |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | Commodity does not exist. | |
| 404 | InvalidCustomerGatewayInstanceId.NotFound | The specified customer gateway instance id does not exist. | The specified customer gateway instance does not exist. Verify the customer gateway instance ID. | |
| InvalidDescription | The description is not valid | The format of the description is invalid. | ||
| 400 | InvalidDescription.Malformed | The Description is illeagl. | The resource description format is invalid. It must be 2–256 characters long and cannot start with http:// or https://. | |
| InvalidDescription.Malformed | The specifid ‘Description’ is not valid. | The format of the description is invalid. | ||
| InvalidDescription.Malformed | The specifid "Description" is not valid. | The source description can be 2 to 256 characters in length. It cannot start with http:// and https://. | ||
| 400 | InvalidDescription.Malformed | The specifid ?Description? is not valid. | The resource description format is invalid. It must be 2–256 characters long and cannot start with http:// or https://. | |
| 400 | InvalidDescription.Malformed | The Description is illegal. | The resource description format is invalid. It must be 2–256 characters long and cannot start with http:// or https://. | |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | Invalid parameter Description value. | |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | Invalid input parameter Description. | |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | Invalid parameter Description value. | |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | The description must be 2–256 characters long and cannot start with http:// or https://. | |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | The specified device does not exist. | |
| 400 | InvalidDhcpOptionsSetId.NotFound | The specified dhcpOptionsSetId does not exist. | The DHCP options set instance does not exist. Verify the parameter. | |
| 400 | InvalidDomainNameServers.Malformed | The specified format of DomainNameServers is invalid. | The specified DomainNameServers parameter format is invalid. Verify the parameter. | |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | The EIP instance is locked. | |
| InvalidEndTime.Malformed | Specified end time is malformed. | EndTime is set to an invalid value. | ||
| InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | EndTime is set to an invalid value. | ||
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | The ENI type cannot be Slave. | |
| InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | The quota rules of route entries do not exist. | ||
| InvalidExternalIp.Malformed | The specified ExternalIp is not a valid IP address. | The specified EIP is invalid. | ||
| InvalidExternalIp.NotFound | Specified External Ip address does not found on the VRouter | The specified EIP does not exist. | ||
| InvalidExternalPort.Malformed | The specified ExternalPort is not a valid port. | The specified public port is invalid. | ||
| InvalidFilterKey.NotFound | The specified filter key is invalid. | |||
| 404 | InvalidFilterKey.ValueNotSupported | Specified filter key is not supported: Filter.X.key | The specified filter key is not supported: Filter.X.key. | |
| InvalidFilterValue | The specified filter value is invalid. | |||
| InvalidForwardEntryId.NotFound | Specified forward entry ID does not exist | The specified DNAT entry does not exist. | ||
| InvalidForwardTableId.NotFound | Specified forward table does not exist. | The specified DNAT table does not exist. Check the parameter and try again. | ||
| InvalidForwardTableId.NotFound | Specified forwardTableId does not exist | The specified DNAT table does not exist. Check the parameter and try again. | ||
| InvalidGlobalAccelerationInstanceDescription.Malformed | The specified Description is not valid. | The description format is invalid. | ||
| InvalidGlobalAccelerationInstanceId.NotFound | The specified GlobalAccelerationInstanceId is not found. | The GA instance does not exist. | ||
| InvalidGlobalAccelerationInstanceName.Malformed | The specified Name is not valid. | The name format is invalid. | ||
| InvalidHaVip.NotFound | The specified HaVip does not exist. | This HAVIP does not exist. | ||
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified region. | The specified HaVIP does not reside in the specified region. Verify that the selected region is correct. | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | The specified HaVIP does not exist in the VPC. | |
| 400 | InvalidIAssociatedInstanceType.ValueNotSupported | The specified value of AssociatedInstanceType is not supported. | The value of AssociatedInstanceType is invalid. Verify that this parameter is correct. | |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | The specified IDaaS application instance ID does not exist. | |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | The specified IDaaS instance ID does not exist. | |
| InvalidIdempotenceParameter.Mismatch | The specified parameters are different from before. | This client token is different from the previous one. | ||
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | The bound instance does not belong to your account. | |
| 400 | InvalidInstance.NotExist | The bound instance does not exist. | The bound instance does not exist. | |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | The specified instance does not exist in the current region. | |
| InvalidInstance.StatusError | The router instance owener error. | The instance is in an invalid state. | ||
| 400 | InvalidInstance.StatusError | The router instance status error. | The instance status is invalid. | |
| 400 | InvalidInstanceId | vswitch does not exist. | The vSwitch instance does not exist. | |
| 400 | InvalidInstanceId | Instance does not exist. | The instance does not exist. | |
| 400 | InvalidInstanceId | VPC does not exists. | The VPC instance does not exist. | |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | The ENI instance does not exist. | |
| InvalidInstanceId.NotFound | The specified Instance does not exist in the specified region. | The instance does not exist in the region. | ||
| InvalidInstanceId.NotFound | Specified instance does not exist. | The instance does not exist. Check the instance ID. | ||
| InvalidInstanceId.NotFound | The InstanceId provided does not exist in our records. | The ECS instance does not exist in the VPC. | ||
| 400 | InvalidInstanceId.NotFound | The InstanceId is not found. | The instance ID was not found. | |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | The instance does not exist. | |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | The InstanceId parameter is invalid. | |
| 400 | InvalidInstanceId.NotFound | [%s] | The physical connection instance [%s] does not exist. | |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | The physical connection instance ID does not exist. | |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | The specified instance ID does not exist. | |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | The instance ID was not found. | |
| InvalidInstanceOwner.Error | The router instance owener error. | The VRouter does belong to your account. | ||
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | The instance owner is incorrect. | |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | The instance type was not found. | |
| InvalidInstanceType.ValueNotSupported | The specified value of InstanceType is not supported. | InstanceType is set to an invalid value. | ||
| InvalidInstanId.NotFound | Specified instance does not exist. | The specified instance does not exist. | ||
| InvalidInternalIp.Malformed | The specified InternalIp is not a valid IP address. | The specified destination private IP address is invalid. | ||
| InvalidInternalPort.Malformed | The specified InternalPort is not a valid port. | The specified private port is invalid. | ||
| InvalidIp.Malformed | The specified ip address is not valid. | The specified private IP address is invalid. | ||
| InvalidIP.Malformed | Ip malformed. | The format of the IP address is invalid. | ||
| InvalidIp.NotInNatgw | The specified Ip not belong to natgateway. | The specified EIP is not associated with the NAT gateway. | ||
| 400 | InvalidIp.NotSameSubnet | Local gateway ip and peer gateway ip are not in the same subnet. | The local gateway IP address and the peer gateway IP address are not in the same subnet. | |
| 400 | InvalidIpAddress.AlreadyExist | Specified IpAddress is already exist. | The IP address already exists. An IP address cannot be duplicated for the same user within the same region. | |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | The specified IP address is already used by another resource. | |
| InvalidIPAddress.AlreadyUsed | The specified IPAddress is already used by other resource. | The specified IP address is in use. | ||
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | The input IP address is invalid. | |
| InvalidIPAddress.NotAvailable | The specified IPAddress is not available because it is a system reserved IPAddress. | The specified IP address is reserved by the system and cannot be used. | ||
| InvalidIPAddress.OutOfRange | The specified IPAddress is out of VSwitch CIDR. | The private IP address does not fall within the vSwitch CIDR block. | ||
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | The specified IP address exceeds the CIDR block of the vSwitch. | |
| InvalidIpAddress.WrongFormat | Specified IpAddress is invalid. | The specified IP address is invalid. | ||
| InvalidIpCount.ValueNotSupported | The specified value of IpCount not supported. | IpCount is set to an invalid value. | ||
| InvalidIpCount.ValueNotSupported | Can not remove all ips of the bandwidthPackage. | You cannot remove all IP addresses from the bandwidth plan. | ||
| InvalidIpInstanceId.NotFound | The specified EIP does not exist. | |||
| 400 | InvalidIpInstanceId.NotFound | The specified Eip InstanceId does not exist in our records. | The specified EIP instance does not exist. | |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | The specified Ipv6InstanceId does not exist. Verify that your input is correct. | |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | The IPv6 CIDR block is invalid. | |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | The specified IPv6CidrBlock was not found. | |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | The specified IPv6 gateway was not found. | |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | The specified IPv6GatewayId was not found. | |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | The specified Ipv6Instance resource was not found. | |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | The specified Ipv6AddressId or Ipv6InternetBandwidthId does not exist. | |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | The specified IPv6 instance was not found. | |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | The specified IPv6ULACidrBlock format is invalid. | |
| InvalidLineOperator.Malformd | The LineOperator provided was invalid. | The value of the LineOperator parameter is invalid. | ||
| 400 | InvalidLoadBalancerId.NotFound | The specified resource of load balancer is not found. | The specified SLB instance does not exist. | |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | The SLB ID does not exist. | |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | The local BGP IP address is invalid. | |
| InvalidLocalGatewayIp.Malformed | The specified LocalGatewayIp is not valid. | The IP address of the local gateway is invalid. | ||
| InvalidLockReason.NotFound | The specified LockReason is not found | The reason why the instance is locked is unknown. | ||
| InvalidName | The name is not valid | The name format is invalid. | ||
| InvalidName.Malformd | The attribute name is illeagl. | Invalid name format. | ||
| 400 | InvalidName.Malformd | The attribute name is illegal. | The attribute name is invalid. | |
| InvalidName.Malformed | The specified ‘Name’ is not valid. | The name format is invalid. | ||
| InvalidName.Malformed | The specified "Name" is not valid. | The name format is invalid. | ||
| InvalidName.Malformed | The specified ?Name? is not valid. | The error message returned because the name format is invalid. | ||
| 400 | InvalidName.Malformed | The attribute name is illegal. | The name format is invalid. | |
| 400 | InvalidName.Malformed | The specified Name is not valid. | The Name parameter value is invalid. | |
| InvalidNatGatewayDescription.MalFormed | NatGateway description is not valid. | The gateway description is invalid. | ||
| InvalidNatGatewayId.NotFound | The NatGatewayId not exist. | The value of the NatGatewayId parameter is invalid. | ||
| InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist in our records. | The value of the NatGatewayId parameter is invalid. | ||
| InvalidNatGatewayName.MalFormed | NatGateway name is not valid. | The gateway name is invalid. | ||
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | The specified Network ACL was not found. | |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | The ENI attached to the Attachment does not exist. | |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | The next-hop instance ID for the specified ENI type does not exist. | |
| 400 | InvalidNetworkInterfaceId.NotFound | The network interface is not found. | The ENI does not exist. | |
| InvalidNextHop | Specified nexthop and nexthop list cannot both null. | The next hop and next hop list cannot be empty at the same time. | ||
| InvalidNexthop | The Specified nexthop illage. | The next hop ID does not exist. | ||
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | A pass-through ENI cannot be used as a next hop. | |
| InvalidNextHop.NotFound | Specified next hop does not exist. | The specified next hop does not exist. | ||
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | The next hop specified in the route does not exist. | |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | The business type of the ENI used as a route next hop is invalid. | |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | The next hop pointed to by the route is invalid. | |
| InvalidNextHopId.NotFound | Specified next hop does not exist. | The next hop does not exist. | ||
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | The route has multiple next hops. | |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | You must specify 2–4 router interfaces as next hops. | |
| InvalidNextHopType | Specified parameter "NextHopType" is not valid | The specified next hop type is invalid. | ||
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | The NextHopType parameter is invalid. | |
| InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | You cannot leave both NextHopType and NextHopList empty. | ||
| InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | NextHopType and NextHopList are not specified. | ||
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | The specified ENI or VM to be bound does not exist. | |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | The specified resource instance does not exist. | |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state | The status of the VBR interface does not support this operation. | ||
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state. | The specified VBR is in an invalid state. Check the status of the VBR. | ||
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | Cloud egress traffic service is already enabled. Use it in the console. | |
| InvalidOperation.RouterInterfaceNotDeleted | The specified VirutalBorderRouter still has routerInterface. | The VBR is associated with a router interface. | ||
| 400 | InvalidOpposite.NotFound | The opposite does not exist. | The peer does not exist. | |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | The peer does not exist. | |
| InvalidOppositeRegionId.NotFound | The oppositeRegionId provided does not exist in our records. | The peer region does not exist. | ||
| InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | The specified next hop is invalid. The peer router of the router interface that you specify as the next hop must be a VBR. | ||
| 400 | InvalidOppositeRouterType.ValueNotSupported | The specified OppositeRouterType is not valid. | The OppositeRouterType parameter value is invalid. | |
| InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | The Ecmp routerEntry with router interfaces local vgw vip not match. | ||
| 400 | InvalidParam | The routerEntry input param is illegal. | The input parameters for modifying the route are invalid. | |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | The cluster IP address corresponding to the specified AvailableZoneId could not be retrieved. | |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | Invalid cloud service type. | |
| InvalidParam.ModifyRouterInterface | Modify routerinterface param invalide | A parameter that you set to modify the router interface is invalid. | ||
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | The parameters for editing the router interface are invalid. | |
| InvalidParam.NotFound | Parameter must not be null | A required parameter is not specified. | ||
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | The parameter cannot be null. | |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | Parameters such as uid, bid, regionNo, remoteRegionNo, and routerId cannot be empty. | |
| InvalidParam.NotNull | The parameter must not be null. | A required parameter is not specified. | ||
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId and natGatewayId cannot both be empty. | |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGateway cannot both be empty. | |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId and natGatewayId cannot both be empty. | |
| 400 | InvalidParameter | The parameter is invalid. | The parameter is invalid. | |
| InvalidParameter | Specified CIDR block is not valid | The specified CIDR block is invalid. | ||
| InvalidParameter | Specified CIDR block is not valid in VPC. | The CIDR block does not fall within the VPC CIDR block. | ||
| InvalidParameter | Specified value of "Bandwidth" is not supported. | The specified bandwidth value is invalid. | ||
| InvalidParameter | Specified UserCidr Subnet mask is not valid . | The subnet mask of the user CIDR block is invalid. | ||
| InvalidParameter | Specified UserCidr invalid format. | The format of the user CIDR block is invalid. | ||
| InvalidParameter | The specified parameter is not valid. | The parameter is set to an invalid value. | ||
| InvalidParameter | Specified value of "Period" is not valid | Period is set to an invalid value. | ||
| InvalidParameter | The specified parameter is not valid | The parameter is set to an invalid value. | ||
| 400 | InvalidParameter | Specified value of InternetChargeType is not valid. | The InternetChargeType parameter value is invalid. | |
| InvalidParameter | Specified value of "Bandwidth" is not valid. | The specified bandwidth value is invalid. | ||
| InvalidParameter.Bandwidth | The specified bandwidth value is invalid. | |||
| InvalidParameter.BandwidthPackage.n.ISP.ValueNotSupport | The specified ISP of BandwidthPackage is not valid. | The specified ISP of the EIP bandwidth plan is invalid. | ||
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is non-compliant. | |
| InvalidParameter.Description.Malformed | The specified Description is not valid. | The specified description is invalid. | ||
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | The specified EniInstanceId is invalid. | |
| InvalidParameter.Mismatch | Specified elastic IP address and ECS instance are not in the same region. | The EIP and ECS instance do not belong to the same region. | ||
| InvalidParameter.Name.Malformed | The specified Name is not valid. | The specified name format is invalid. Enter the name in the valid format. | ||
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | The EIP and the bound instance must be in the same region. | |
| InvalidParameter.Spec.ValueNotSupported | The specified Spec is not valid. | The specification is invalid. | ||
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | The specified TagKey parameter is non-compliant. | |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | The specified TagValue parameter is non-compliant. | |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | Multiple invalid input parameters exist. | |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | The specified VPN connection name is non-compliant. | |
| 400 | InvalidParams.AlreadyExists | bgp network already exists | The BGP network already exists. | |
| InvalidParams.NotFound | instance not found | The specified instance does not exist. | ||
| 400 | InvalidParams.NotFound | vpc instance not found | The specified VPC does not exist. Check whether the VPC is correct. | |
| InvalidParams.NotNull | parameter must not null. | A required parameter is not specified. | ||
| InvalidParams.NotNull | invalid peer asn cannot equals aliyun asn:45104 | The AS number cannot be the same as the AS number on the Alibaba Cloud side. | ||
| 400 | InvalidParams.NotNull | The parameter must not be null, name or description or icmpReplyEnabled | Name, Description, and ICMP reply enablement parameters cannot all be empty. | |
| 400 | InvalidParams.NotNull | params must not null. | The parameter cannot be empty. | |
| InvalidParams.PeerIpAddressInUse | peer ip address in use | The peer IP address is in use. | ||
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | The peer IP address is in use; BGP peering cannot be created. | |
| InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif | The VBR must have at least one subinterface to create a BGP. | ||
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | Specify PeerIpAddress. | |
| InvalidPeerAsn.Malformed | invalid peer asn cannot equals aliyun asn:45104 | The AS number cannot be the same as the AS number on the Alibaba Cloud side. | ||
| InvalidPeerGatewayIp.Malformed | The specified PeerGatewayIp is not valid. | PeerGatewayIp is set to an invalid value. | ||
| 400 | InvalidPeeringSubnetMask.Malformed | The specified PeeringSubnetMask is not valid. | The specified PeeringSubnetMask is invalid; verify this parameter. | |
| InvalidPeerIpAddress | multi pconn peer ip can not be null. | The IP addresses of multiple Express Connect circuits cannot be empty. | ||
| InvalidPeerLocation.Malformd | The PeerLocation provided was invalid. | PeerLocation is set to an invalid value. | ||
| InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | Period is set to an invalid value. | ||
| 400 | InvalidPhoneNum.Malformed | The parameter PhoneNum is invalid. | The PhoneNum parameter is invalid. | |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | The bandwidth value bound to the physical connection is invalid. | |
| InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | The Express Connect circuit is in an invalid state. | ||
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | The InstanceChargeType parameter is invalid. | |
| InvalidPhysicalConnectionId.NotEnabled | The specified PhysicalConnectionId is not in Enabled state. | The Express Connect circuit is in an invalid state. Check the Express Connect circuit and try again. | ||
| 400 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId is not found. | The specified physical connection ID does not exist. | |
| InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId does not belong to user. | The specified physical connection does not belong to your account. | ||
| InvalidPhysicalConnectionId.NotFound | The PhysicalConnectionId provided does not exist in our records. | The Express Connect circuit does not exist. | ||
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found. | No physical connection found for the specified physical connection ID. | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | Invalid PhysicalConnectionId parameter. | |
| InvalidPhysicalConnectionId.NotMatched | instance id not matched. | The instance ID does not match. | ||
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | The operation on the physical connection is invalid. | |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | The port type of the physical connection is invalid. | |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | Input policy information format is incorrect. | |
| InvalidPortType.Malformd | The PortType provided was invalid. | The specified port type is invalid. | ||
| 400 | InvalidPortType.NotFound | Specified port type is not found. | No inventory available for the specified port specification. | |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | The port type does not exist. | |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | The Price parameter is invalid. | |
| InvalidProtocal.ValueNotSupported | The specified IpProtocol does not support. | The specified protocol is not supported. | ||
| InvalidRedundantPhysicalConnection | redundant physical connection doesn't belong to current user. | The specified redundant Express Connect circuit does not belong to your Alibaba Cloud account. | ||
| InvalidRedundantPhysicalConnectionId.NotFound | The RedundantPhysicalConnectionId does not found. | The specified redundant Express Connect circuit does not exist. | ||
| InvalidRedundantPhysicalConnectionStatus | invalid redundant physical connection status. | The redundant Express Connect circuit is in an invalid state. | ||
| InvalidRegion.NotSupport | The specified region does not support. | The specified region does not support. | ||
| InvalidRegionId.NotFound | The specified region not found. | RegionId is set to an invalid value. Check whether the service is available in the specified region and try again. | ||
| InvalidRegionId.NotFound | Specified value of "regionId" is not supported. | RegionId is set to an invalid value. Check whether the service is available in the specified region and try again. | ||
| 404 | InvalidRegionId.NotFound | The specified RegionId is not found. | The specified RegionId does not exist; verify product availability in this region. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist in our records. | The specified RegionId does not exist. | |
| InvalidRegionId.NotFound | The parameter wrong | The parameter value is invalid. | ||
| InvalidRegionId.NotFound | The specified region ID is invalid. | |||
| 404 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | The specified RegionId does not exist; verify this parameter. | |
| 404 | InvalidRegionId.NotFound | The specified RegionId does not exist. | The specified region does not exist; verify this parameter. | |
| 400 | InvalidRegionId.NotFound | The specified region is not found. | The specified region does not exist. | |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in ec region list. | The provided regionId is invalid; verify it. | |
| 404 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | Parameter error. | |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | Specified region not found during access authentication. | |
| 404 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | The specified RegionId does not exist. | |
| InvalidRegionId.NotSupport | The RegionId provided does not support in our records. | The specified region ID is invalid. | ||
| InvalidRegionPair.NotReachable | The specified OppositeRegion is not reachable by ExpressConnect from that region specified by "RegionId" | The specified region ID is invalid. | ||
| invalidRemovedIpAddresses.NotFound | Some of the specified value of RemovedIpAddress not found in specified BandwidthPackage. | An EIP in the EIP list is not associated with the EIP bandwidth plan. Check the EIP list. | ||
| InvalidRemovedIpAddresses.NotFound | Some of remove ip is not natPublicIp. | One or more public IP addresses to be removed are not associated with the NAT gateway. | ||
| 400 | InvalidReservationTime.Malformed | The parameter ReservationTime is invalid. | The ReservationTime parameter is invalid. | |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | The instance to be bound is already in bound status. | |
| 400 | InvalidResourceGroupId | The specified ResourceGroupId does not exist. | The resource group ID does not exist. | |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | A FlowLog instance already exists for the specified resource. | |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | The specified resource ID does not exist. | |
| InvalidRole.ValueNotSupported | The specified Role is not valid. | The specified role is invalid. | ||
| InvalidRouteEntry | Specified routeEntry not exist. | The specified route entry does not exist. | ||
| InvalidRouteEntry.Duplicate | The route entry already exist. | The specified route entry already exists. | ||
| InvalidRouteEntry.NotFound | Route entry not exists. | The route entry does not exist. | ||
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | The specified route entry does not exist. | |
| 400 | InvalidRouteEntryId.NotFound | The specified routeEntry does not exist. | The specified route entry does not exist. | |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | The specified route entry was not found. | |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | The specified route entry does not exist. | |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | Modification failed because the specified route entry name is invalid. | |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | Equal-cost routes require selecting 2–4 router interfaces as next hops. | |
| 404 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | RI cannot be attached to CEN. | |
| InvalidRouterId.NotFound | The specified RouterId does not exist in our recored. | The specified router ID does not exist. | ||
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | The RouterId parameter is invalid. | |
| InvalidRouterInterface | invalid router interface. | The specified router interface does not exist. | ||
| InvalidRouterInterfaceChargeType.Malformed | The prepaid routerinterface can not delete. | You cannot delete a subscription router interface. | ||
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | The specified RouterInterface ChargeType is invalid. | |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our records. | The specified router interface does not exist. | ||
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our record. | The specified router interface does not exist. | ||
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | The specified RouterInterface instance does not exist. | |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | The specified RouterInterface Spec is invalid. | |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | The specified next hop does not exist in the VBR route table. | |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid. | The router type is invalid. | ||
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid | The router type is invalid. | ||
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | The route table instance does not exist. | |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | The specified route table was not found. | |
| InvalidRouteTableId.NotFound | Specified route table does not exist. | The specified route table does not exist. | ||
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | The specified additional CIDR block cannot be found. | |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | The specified additional CIDR block is not found. | |
| InvalidServiceLocation.Mismatch | The specified ServiceLocation does not match the region. | The specified service region does not match the current region. | ||
| InvalidServiceLocation.ValueNotSupported | The specified ServiceLocation is not supported. | The specified service region is not supported. | ||
| InvalidSnatEntryId.NotFound | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. Check whether the SNAT entry is valid. | ||
| InvalidSnatEntryId.NotFound | Specified Snat entry ID does not exist | The specified SNAT entry does not exist. Check whether the SNAT entry is valid. | ||
| InvalidSnatIp.Malformed | The specified SnatIp is not a valid IP address. | The specified EIP is invalid. | ||
| InvalidSnatIp.NotFound | Specified SnatIp does not found on the NAT Gateway | The public IP address does not exist in the NAT gateway. | ||
| InvalidSnatTableId.NotFound | Specified SNAT table does not exist. | The specified SNAT table does not exist. | ||
| InvalidSpec.ValudNotSupported | The specified Spec is not supported. | The specification does not support this operation. Change the specification and try again. | ||
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | The router interface specification is invalid. | |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | The parameter is invalid. The SSL VPN server certificate cannot be found. | |
| InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | The start time is invalid. | ||
| InvalidStartTime.Malformed | Specified start time is malformed. | The start time is invalid. | ||
| InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | The start time is invalid. | ||
| InvalidStatus | invalid physical connection status. | The Express Connect circuit is in an invalid state. | ||
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | This operation is allowed only when the router interface status is Active, Idle, or Inactive. | |
| InvalidStatus.CannotOperate | invalid status cannot operate | You cannot perform the operation when the specified resource is in the current state. | ||
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | The instance is in a suspended state and does not support this operation. | |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | The ENI status does not support this operation. | |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | The NAT gateway status is invalid. | |
| 400 | InvalidStatus.NotAllow | Bind instance status invalid | The bound instance status is invalid. | |
| InvalidStatus.NotAllowed | The virtual border has been associated by physicalConnection. | The VBR is associated with an Express Connect circuit. | ||
| InvalidStatus.NotAllowed | Invalid virtual border router status. | The current VBR status does not support this operation. | ||
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | The EIP unbinding operation failed because SNAT or DNAT is in an unstable state. | |
| InvalidStatus.StatusNotEnabled | The physical connection status is invalid. | The status of the Express Connect circuit does not support this operation. Check the status of the Express Connect circuit. | ||
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | A binding relationship exists between the VBR and ECR. Unbind them first. | |
| 400 | InvalidTagKey | The tag keys are not valid. | Invalid tag index. | |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | Invalid tag key. Specify a valid tag key and try again. | |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | Invalid resource scope. | |
| 400 | InvalidTagValue | The tag values are not valid. | Invalid tag value. | |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | The current TransitRouter does not support this operation. Upgrade the TransitRouter and try again. | |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | The specified tunnel CIDR is invalid. | |
| InvalidType.Malformd | The Type provided was invalid. | Type is set to an invalid value. | ||
| InvalidUserCidr.Malformed | Specified UserCird status is wrong | UserCidr is set to an invalid value. | ||
| 400 | InvalidUserCidr.Malformed | Specified UserCidr overlapping in of 100.64.0.0/10. | The UserCidr overlaps with 100.64.0.0/10. | |
| InvalidUserCidr.Quota | Specified UserCidr number is greater than 3. | The number of user CIDR blocks that you specify has reached the upper limit. | ||
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | The number of user CIDR parameters exceeds the quota limit. | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter is not found. | The VBR does not exist. Check the VBR ID. | ||
| InvalidVbrId.NotFound | The specified VirutalBorderRouter or PhysicalConnection does not exist in our records. | The VBR or the Express Connect circuit does not exist. | ||
| InvalidVbrId.NotFound | The specified VirutalBorderRouter does not exist in our records. | The VBR does not exist. Check the VBR ID. | ||
| InvalidVbrNetwork | vbr netowrk not exists | The VBR does not exist. Check the VBR ID. | ||
| InvalidVbrOwnerId.NotFound | The specified VbrOwnerId is not valid. | VbrOwnerId is set to an invalid value. | ||
| InvalidVBRStatus | invalid virtual border router status. | The VBR is in an invalid state. | ||
| InvalidVlanId.Malformed | The specified VlanId is not valid. | VlanId is set to an invalid value. | ||
| InvalidVlanId.Used | The specified VlanId has been used. | The VLAN ID is in use. | ||
| InvalidVPC.NotFound | vpc not exists. | The VPC does not exist. Check whether the specified VPC is valid. | ||
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | The specified VPC does not exist. | |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | The specified VPC instance is not found. | |
| InvalidVpcDiscription.Malformed | Specified VPC description is not valid. | The format of the VPC description is invalid. | ||
| 404 | InvalidVpcId.NotFound | Specified value of VpcId is not found in our record. | The VPC does not exist. Verify that the VPC ID is correct. | |
| InvalidVpcId.NotFound | Specified VPC does not exist. | The specified VPC does not exist. | ||
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | The specified VpcId instance does not exist. | |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | The specified VPC instance is not found. | |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | The number of VpcIds exceeds the limit. | |
| InvalidVpcName.Malformed | Specified VPC name is not valid. | The format of the VPC name is invalid. Enter a valid VPC name and try again. | ||
| InvalidVPCStatus | vpc incorrect status. | The VPC is in an invalid state. | ||
| InvalidVpnConnection.AlreadyExists | Vpn connection already exists. | Vpn connection already exists. | ||
| 404 | InvalidVpnConnectionInstanceId.NotFound | The specified vpn connection instance id does not exist. | The specified VPN connection does not exist. Verify that the VPN connection ID is correct. | |
| 400 | InvalidVpnGatewayInstanceId.NotFound | The specified vpn gateway instance id does not exist. | The specified VPN gateway does not exist. Verify that the VPN gateway is correct. | |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | The specified VPN instance is not found. | |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | The VPN gateway IP does not exist. | |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | The specified route entry does not exist. | |
| InvalidVRouter.NotFound | vRouter not exists. | The specified vRouter does not exist. Check whether the specified vRouter is valid. | ||
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | Invalid router description input. | |
| InvalidVRouterDiscription.Malformed | Specified virtual router description is not valid. | The description format of the specified vRouter is invalid. | ||
| InvalidVRouterId.NotFound | Specified virtual router does not exist. | The specified vRouter does not exist. Check whether the specified vRouter is valid. | ||
| InvalidVRouterName.Malformed | Specified virtual router name is not valid. | The name format of the specified vRouter is invalid. | ||
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | The specified vSwitch does not exist. | |
| InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The vSwitch description is invalid. | ||
| 400 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The vSwitch description format is invalid. | |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | Insufficient available IP addresses in the primary vSwitch. | |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | The zone where the primary vSwitch resides is not supported. | |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | The zone where the vSwitch resides does not support dual-tunnel VPN creation. Use another vSwitch. | |
| InvalidVSwitchId.NotFound | The specified virtual switch does not exists. | The vSwitch does not exist. | ||
| InvalidVSwitchId.NotFound | The specified virtual switch not found. | The vSwitch does not exist. | ||
| InvalidVSwitchId.NotFound | VSwitch not exist. | The error message returned because the specified vSwitch does not exist. Check whether the specified vSwitch ID is valid. | ||
| InvalidVSwitchId.NotFound | The specified VSwitch does not exist in the specified region. | The vSwitch does not exist in the specified region. | ||
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | Insufficient available IP addresses in the secondary vSwitch. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | The secondary vSwitch's zone is not supported. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | When creating a VPN gateway in this region, passing a second vSwitch ID is not allowed. | |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | The primary and secondary zones cannot be the same. | |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | When creating a dual-tunnel VPN, the two specified vSwitches must belong to different zones. | |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | When creating a dual-tunnel VPN, the two specified zones in the input parameters must differ. | |
| 400 | InvalidVSwitchName.Malformed | Specified virtual switch name is not valid. | The vSwitch name format is invalid. Please verify the vSwitch name format. | |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | The zone for dual-tunnel disaster recovery is currently unsupported. | |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | The first zone in the input parameters is unavailable. | |
| InvalidZoneId.NotFound | Specified value of ZoneId is not exists. | The specified zone does not exist. | ||
| InvalidZoneId.NotFound | Specified zone does not exist. | The zone ID is invalid. | ||
| InvalidZoneId.NotFound | Can not find ZoneId for allocated ip. | The zone of the specified IP address is invalid. | ||
| INVALID_COMPONENT | This instance type is unavailable for this account. | |||
| INVALID_PARAMETER | The parameter invalid. | A parameter is set to an invalid value. | ||
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | The specified VPC does not exist. Please verify the input VPC. | |
| INVALID_WEIGHT_PARAM | Specified value of weight invalid | The specified weight is invalid. | ||
| 400 | InvokeError | instance quota rule invoke error. | Failed to retrieve rule data. Please try again later. | |
| 400 | Ip.Allocated | The reserve ip has been allocated. | A reserved IP has already been allocated. | |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | The client IP pool conflicts with another SSL VPN server in the same VPC. | |
| 400 | IpConflict | Client IP pool conflict with local IP range. | The client IP pool conflicts with the local IP range. | |
| IpInstanceId.AlreadyInBandwidthPackage | The EIP is already associated with the EIP bandwidth plan. | |||
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId is already added to the bandwidth package. | This EIP instance has already been added to the bandwidth package. | |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | This EIP instance already exists in the shared bandwidth package. | |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | This EIP instance is no longer in the bandwidth package. | |
| IpInstanceId.BizStatusInvalid | The specified EIP is disabled. | |||
| 400 | IpInstanceId.BizStatusInvalid | The specified EIP BizStatus is incorrect. | The commercial status of the specified EIP is invalid. | |
| IpInstanceId.ChargeType.NotSupport | The EIP uses the subscription billing method. | |||
| 400 | IpInstanceId.ChargeType.NotSupport | You cannot add subscription EIP instance to the bandwidth package. | Subscription-based EIP instances cannot be added to bandwidth packages. | |
| 400 | IpInstanceId.InvalidIpInternetChargeType | You cannot add the hybrid cloud EIP to a pay by traffic bandwidth package. | Hybrid cloud mode EIPs cannot be added to pay-by-traffic bandwidth packages. | |
| IpInstanceId.NotBandwidthPackage | The EIP is not associated with an EIP bandwidth plan. | |||
| IpInstanceId.QuotaExceeded | The number of EIPs associated with the EIP bandwidth plan exceeds the upper limit. | |||
| 400 | IpInstanceId.QuotaExceeded | The maximum number of EIP that you can add to the bandwidth package is exceeded. | The maximum number of EIPs that can be added to this bandwidth package has been reached. | |
| LastTokenProcessing | The last token request is processing. | A token request is being processed. Try again later. | ||
| LimitationExceed.InterfaceNumberOnRouter | Total number of RouterInterfaces on a Router exceeded. | The number of router interfaces reaches the quota. | ||
| LinkRole.NotSupport | This linkrole is not supported | This link is not supported. | ||
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | The O&M event does not exist. | |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | The specified O&M event execution time must be earlier than the latest execution time. | |
| MCMS_VBR_EMPTY | Specified region have no vbr. | No VBR exists in the region. Select another region and try again. | ||
| MCMS_VPC_EMPTY | Specified region have no vpc. | No VPC exists in the region. Specify another region and try again. | ||
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | Parameters do not match. Please check the parameters. | |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | The zone of the CloudBox shared bandwidth does not match that of the EIP. | |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | The zone of the CloudBox shared bandwidth does not match that of the EIP. | |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | The EIP security protection type does not match the address pool security protection type. | |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | Operation failed: the specified ENI and route table do not belong to the same VPC. | |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | The specified HA VIP and route table do not belong to the same VPC. | |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | The IP and bandwidth package do not match; the IP is not in the specified bandwidth package. | |
| 400 | Mismatch.IpAndIsp | The specified IP address does not match the ISP. | Failed to apply for the specified IP: ISP and IP parameters do not match. | |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | Operation failed: the specified IPv4 gateway and route table do not belong to the same VPC. | |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | The specified Ipv6Address and Ipv6Gateway are not in the same VPC. | |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | The input IpVersion does not match the IpVersion of the input address pool. | |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s and %s do not match. | |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | The specified network ACL is not associated with the vSwitch. | |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | The resource region differs from the service invocation region. | |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | The specified private IP does not match the vSwitch. | |
| 400 | MissingParam | MissingParameter %s | Parameter missing. | |
| 400 | MissingParam | Miss mandatory parameter. | Required parameter missing. | |
| 400 | MissingParam.%s | The param of %s is missing. | Parameter missing. | |
| 400 | MissingParam.Action | You must specify Action. | Action parameter not specified. | |
| 400 | MissingParam.AliUid | You must specify AliUid. | AliUid missing. | |
| 400 | MissingParam.AliUid | AliUid is missing. | AliUid parameter missing. | |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | Parameter aliUid missing. | |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | Parameter AssociatedInstanceId missing. | |
| 400 | MissingParam.Bandwidth | You must specify Bandwidth. | Bandwidth parameter missing. | |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | Bandwidth parameter missing. | |
| 400 | MissingParam.bid | The param of bid is missing. | Parameter bid missing. | |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | Parameter BindInstanceId missing. | |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | Failed to add CIDR block to address pool: CIDR block or mask parameter missing. | |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | When creating resources from an IPAM address pool, specify Cidr or CidrMask. | |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | VSwitchCidrReservationMask and VSwitchCidrReservationCidr cannot both be empty. Specify one and retry. | |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | Planned maintenance time must be specified. | |
| 400 | MissingParam.context | The param of context is missing. | Parameter context missing. | |
| 400 | MissingParam.CustomerGatewayAsn | Asn of customer gateway is mandatory when BGP is enabled. | When enabling BGP, the customer gateway's ASN cannot be empty. | |
| 400 | MissingParam.Description | You must specify Description. | Instance description is required. | |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | Destination CIDR not specified. | |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | EnableIpv6 parameter missing. | |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | Parameter EnableIpv6 missing. | |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | Filter condition instance ID parameter not specified. | |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGatewayId cannot both be empty. | |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | When enabling two-factor authentication, specify the IDaaSApplicationId parameter. | |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | When enabling two-factor authentication, IDaaS instance ID is a required parameter. | |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | When enabling two-factor authentication, specify the IDaaSRegionId parameter. | |
| 400 | MissingParam.InstanceId | You must specify InstanceId. | Missing param of InstanceId. | |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | InstanceId parameter is missing. | |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | The physical connection instance ID must be specified. | |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | InstanceId cannot be empty. | |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | Parameter missing: Ipv6CidrBlock is required. | |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | Ipv6InstanceId is not specified. | |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | IpVersion parameter is missing. | |
| 400 | MissingParam.Name | You must specify Name. | Instance name is missing. | |
| 400 | MissingParam.NatGatewayId | You must specify NatGatewayId. | NatGatewayId parameter is required. | |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | When creating an SNAT rule for a NAT gateway with PrivateLink enabled, NetworkInterfaceId must be specified. | |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | The next hop instance ID of the route entry to be modified is missing. | |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | The next hop instance type of the route entry to be modified is missing. | |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | Required parameter is missing. | |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | Peer IP address parameter is missing. | |
| 400 | MissingParam.PhysicalConnectionId | You must specify PhysicalConnectionId. | PhysicalConnectionId is missing. | |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | PhysicalConnectionId parameter is missing. | |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | Construction engineer information must be provided. | |
| 400 | MissingParam.Priority | You must specify Priority. | Priority parameter is not specified. | |
| 400 | MissingParam.Protocol | You must specify Protocol. | Protocol parameter is not specified. | |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | PublicIpAddressPoolId parameter is missing. | |
| 400 | MissingParam.RegionNo | You must specify RegionNo. | RegionNo is missing. | |
| 400 | MissingParam.RegionNo | RegionNo is missing. | RegionNo parameter is missing. | |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | When creating a GMSSL VPN connection, PeerId is required. | |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | Either ReservedCidr or ReservedCidrMask must be specified. | |
| 400 | MissingParam.Resource | Missing parameter Resource. | Resource parameter is missing. | |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | ResourceType parameter is missing. | |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | RouteEntries parameter is missing. | |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | Required parameter is missing. | |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | Request is missing required parameters. You must provide RouteEntryId, or both RouteTableId and DestinationCidrBlock. | |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | Traffic mirror filter rule instance ID parameter is not specified. | |
| 400 | MissingParam.Rules | You must specify rule instance ID. | Traffic mirror filter rule instance ID is not specified. | |
| 400 | MissingParam.ScheduledMigrationParam | You must specify the parameters that are required for the scheduled migration. | Required parameters for NAT gateway migration reservation are missing. | |
| 400 | MissingParam.SecondaryCidrBlockOrIpv6CidrBlock | Either SecondaryCidrBlock or Ipv6CidrBlock must be specified. | Required parameter missing: secondary CIDR block or IPv6 CIDR block. | |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | SecondaryCidrMask parameter is required. | |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | When adding a secondary CIDR block to a VPC without using an IPAM address pool, exactly one of SecondaryCidrBlock and Ipv6CidrBlock must be specified. | |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | When creating an SNAT rule for a public or private NAT gateway, SnatIp must be specified. | |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | Traffic mirror source instance ID parameter is not specified. | |
| 400 | MissingParam.Spec | The param of Spec is missing. | Spec parameter is missing. | |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | Source CIDR is not specified. | |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | Tags parameter is missing. | |
| 400 | MissingParam.Tags | The Tags parameter is required. | Tags parameter is required. | |
| 400 | MissingParam.TimePoint | You must specify TimePoint. | TimePoint parameter is required. | |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | Neither TrafficAnalyzerId nor ProjectName and LogStoreName parameters are provided. | |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | Traffic mirror filter rule is not specified. | |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | VBR failover group instance ID or VBR instance ID is missing. | |
| 400 | MissingParam.VbrId | You must specify VbrId. | vbrId is missing. | |
| 400 | MissingParam.VpcId | You must specify VpcId. | Required parameter VpcId is missing. | |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | Parameter missing: vpcId is required. | |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | VSwitchId parameter is missing. | |
| 400 | MissingParam.Zones | The Zones parameter is required. | Zones parameter is required. | |
| MissingParameter | Missing mandatory parameter | Required parameters are not specified. Check whether you have specified all required parameters before you call this operation. | ||
| MissingParameter | Either nexthopId or nextHopList should be specified | nexthopId or nextHopList is not specified. | ||
| MissingParameter | The input parameter is mandatory for processing this request is not supplied. | Some required parameters are not specified. Specify all required parameters and try again. | ||
| MissingParameter | The input parameter 'PhysicalConnectionId' that is mandatory for processing this request is not supplied. | PhysicalConnectionId is not specified. | ||
| MissingParameter | The input parameter 'VlanId' that is mandatory for processing this request is not supplied. | VlanId is not specified. | ||
| MissingParameter | The input parameter 'LocalGatewayIp' that is mandatory for processing this request is not supplied. | LocalGatewayIp is not specified. | ||
| MissingParameter | The input parameter 'PeerGatewayIp' that is mandatory for processing this request is not supplied. | PeerGatewayIp is not specified. | ||
| MissingParameter | The input parameter 'PeeringSubnetMask' that is mandatory for processing this request is not supplied. | PeeringSubnetMask is not specified. | ||
| MissingParameter | LocalGatewayIp | LocalGatewayIp is not specified. | ||
| MissingParameter | Miss mandatory parameter. | Some required parameters are not specified. Specify all required parameters and try again. | ||
| MissingParameter | Some required parameters are not specified. Specify all required parameters and try again. | |||
| MissingParameter | The input parameter OwnerId | Some required parameters are not specified. | ||
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | LocalGatewayIp, peerGatewayIp, and peeringSubnetMask parameters cannot be empty. | |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | Port type and bandwidth value cannot both be empty. | |
| MissingParameter.BandwidthPackage | only support one BandwidthPackage be created with NatGateway. | You must specify an EIP bandwidth plan. | ||
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | When enabling two-factor authentication, IDaaSInstanceId parameter must be provided. | |
| 400 | MissingParameter.TagKey | The input parameter TagKey that is mandatory for processing this request is not supplied. | TagKey parameter is missing. | |
| 400 | MissingParameter.TagValue | The input parameter TagValue that is mandatory for processing this request is not supplied. | TagValue parameter is missing. | |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | When enabling BGP, TunnelCidr is required. | |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | Required parameters are missing when creating tunnels for dual-tunnel VPN. | |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | Failed to modify VPN connection parameters: multiple local subnets configured while using IKEv1 protocol. | |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | Fault drill is not supported for VBRs in single-VBR multi-PConn scenarios. | |
| NATGATEWAY_FINANCIALLOCKED | The specified NAT gateway has expired. | |||
| NATGW_MODIFY_SPEC_SAME | The specified Spec is same with now. | The specified gateway size is the same as the current one. | ||
| 400 | NATGW_NOT_EXIST | The specified NAT gateway does not exist. | The specified NAT gateway does not exist. | |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | Network ACL is bound. | |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | Special Network ACL is being modified. | |
| NOCARD | No payment card is associated. | |||
| 400 | NoPermission.CreateServiceLinkedRole | You are not authorized to create service linked role. | You do not have permission to create an SLR. | |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | The specified bandwidth package does not exist. | |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | The router interface is a user-side interface and cannot be activated. | |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | The router interface is not a virtual network interface used for connection. | |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | The authentication algorithm specified in the IPsec connection is not supported. | |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | The Pfs parameter specified in the IPsec connection is not supported. | |
| NOT_ALLOW_USE_SOURCECIDR | The User not in nat_scope_unlimited white list. Cannot use SourceCidr param. | The private IP address does not fall within the VPC CIDR block. | ||
| NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | |||
| 400 | nsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not support to enable security protection. | VPC NAT Gateway does not support enabling security protection. | |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | |
| 409 | OperationConflict | Request was denied due to conflict with a previos request. | Request conflict; please try again later. | |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | Operations on this instance are too frequent; please try again later. | |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | Request conflict; please try again later. | |
| OperationDenied | Eip of default vpc not allow this operation | The operation is not supported by EIPs in a default VPC. | ||
| OperationDenied | The operation is not supported in this status. | The status of the VPC is invalid and the operation cannot be performed. | ||
| OperationDenied | The snapshot creation for the specified disk is not finished yet. | The snapshot of the specified disk is being created. | ||
| OperationDenied | Specified operation is denied as route entry type is system. | The specified route is a system route. | ||
| OperationDenied | Specified instance is not in VPC. | The specified instance does not exist in the VPC. | ||
| OperationDenied | The user cannot allow to create natgw | You are not allowed to delete system routes. | ||
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | Your account type does not support this transaction. | |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | A FlowLog instance that collects traffic for all scenarios has already been created for the specified resource; you cannot create another FlowLog instance that collects traffic for only selected scenarios. | |
| 400 | OperationDenied.AlreadyNewest | The operation is denied because the firmware version of the VPN gateway is already the latest. | The firmware version of the current VPN Gateway is already the latest; it cannot be upgraded again. | |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | VSwitches do not support binding to gateway route tables. | |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | Operation denied due to insufficient available CIDR resources. | |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | VPC interconnection between Financial Cloud accounts and standard accounts is not allowed. | |
| 400 | OperationDenied.CenAttached | The operation is not allowed because the VPC is attached to CEN. | The specified operation is prohibited because the VPC is associated with a CEN. | |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | Creating routes pointing to this type of CEN in a route table is not supported. | |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | Operation denied because the input CIDR falls within an invalid CIDR range. | |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | Operation denied because the CIDR is unavailable in the IPAM address pool. | |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | This operation does not support Classic Load Balancer instances. | |
| 400 | OperationDenied.CloudBoxResourceExist | The operation is not allowed because there are resources related to the cloud box in VPC. | The specified operation is prohibited because cloud box-related resources exist in the VPC. | |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | The specified operation is prohibited because only custom route tables support adding routes with next hops pointing to cloud box-type VBRs. | |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | The specified operation is not allowed because the route table contains routes with next hops pointing to cloud box VBRs. | |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | The specified operation is prohibited because the VSwitch is of cloud box type. | |
| 400 | OperationDenied.CloudBoxVSwitchExist | The operation is not allowed because a cloud box type vSwitch exists in VPC. | The specified operation is prohibited because cloud box-type VSwitches exist in the VPC. | |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | The specified operation is prohibited because the zone is of cloud box type. | |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | Published routes do not support creating primary/secondary or load-balancing routes. | |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | Insufficient permissions to create a shared physical专线; contact your business manager. | |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | Insufficient permissions to create a shared physical专线; contact your business manager. | |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | Routes pointing to GatewayEndpoint cannot be manually deleted. | |
| 400 | OperationDenied.DeleteManagedRouteEntry | The operation is not allowed because of route entry is managed. | Routes managed by cloud services cannot be deleted. | |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | Shared PrefixLists cannot be deleted. | |
| 400 | OperationDenied.DirectEipExist | The operation is not allowed because of existing directEip. | Operation not allowed because direct EIPs or enhanced NAT Gateways exist in this VPC. | |
| 400 | OperationDenied.DnatEntryStatusInvalid | The NAT gateway has DNAT entry in invalid status. | The DNAT status configured on the NAT Gateway is invalid. | |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | A network interface card (NIC) cannot serve simultaneously as both source and destination for a traffic mirror session. | |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | The ECS instance does not support the traffic mirroring feature. | |
| 400 | OperationDenied.EipBondTypeIsAlreadyNAT | The EIP bond type is already NAT type. | The EIP binding type is already NAT type. | |
| 400 | OperationDenied.EipStatusInvalid | The NAT gateway has EIP in invalid status. | The EIP bound to the NAT Gateway has an invalid status. | |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | Creating an IPv4 Gateway is not allowed because direct EIPs exist. | |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | Operation failed because IPv6 public IPs exist in the VPC. | |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | Low-version route tables exist in this VPC; submit a ticket for resolution. | |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | Operation denied because Route Table 1.0 exists. | |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | Invalid FlowLog delivery destination; cannot start this FlowLog. | |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | The specified NIC is not bound to any ECS instance. | |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | Operation not allowed because the specified IPv4 Gateway is in bound state. | |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | Gateways and route tables must reside in the same VPC to be associated. | |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | The specified gateway route table and gateway instance belong to different VPCs; verify your input. | |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | The specified route table cannot be deleted because it is bound to a gateway. | |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | Creating routes pointing to this instance type is not supported in gateway route tables. | |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | An unsupported new next-hop type was provided when modifying the next hop of a local route. | |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | Operation failed because Anycast EIPs exist in the specified VPC. | |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | Operation failed because the instance is associated with a CEN. | |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | An unsupported delivery type was specified when modifying the FlowLog delivery destination or enabling/disabling NIS traffic analysis. | |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | The specified managed ENI type is not supported as a traffic mirror source. | |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | The specified managed ENI type is not supported as a traffic mirror destination. | |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | Operation denied because VPCs cannot be created or additional CIDR blocks added from address pools lacking regional attributes. | |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | Application failed: the IP belongs to another user. | |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | EIP binding failed because an IPv4 Gateway exists in this VPC. | |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | Operation not allowed because the specified IPv4 Gateway is not activated. | |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | Creating IPv6 routes on custom route tables is not allowed. | |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | The current ISP does not support creating enhanced security protection address pools. | |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | L2 EIP binding to IP addresses is not supported in this region. | |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | Construction is not allowed on shared physical专线. | |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | The LOA status of the port does not permit completion reporting or line O&M. | |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | Only the next-hop attribute of local routes can be modified. | |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | The VSwitch to which the local route you are modifying belongs is currently bound to the route table; modifying its next hop is prohibited. | |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | Modifying local routes in system route tables is prohibited. | |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | The next hop of a local route has been modified. | |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | When modifying the next hop of a local route in a custom route table, the destination CIDR of the local route matches exactly the CIDR of a VSwitch bound to that route table. | |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | The input mask or CIDR mask is outside the allowed range. | |
| 400 | OperationDenied.MissingAsn | The autonomous system number of the customer gateway is mandatory when BGP authentication key is specified. | When specifying a BGP authentication key for a customer gateway, an Autonomous System Number (ASN) must also be specified. | |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | The default DHCP options set cannot be modified. | |
| 400 | OperationDenied.ModifyManagedRouteEntry | The operation is not allowed because of route entry is managed. | Cannot modify a managed route. | |
| 400 | OperationDenied.NatGatewayStatusInvalid | The NAT gateway status is invalid. | The NAT gateway status is invalid. | |
| 400 | OperationDenied.NatgwExist | The operation is not allowed because the NAT gateway exists in VPC. | The specified operation is prohibited because a NAT gateway exists in the VPC. | |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | Deletion failed; the user with the physical port must delete it. | |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | Deletion failed; the user with the shared port must delete it. | |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | This route entry has been published to other components; the specified next hop type does not support route publishing. | |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | The target route entry’s next hop already exists. | |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | The specified operation is prohibited because the next hop has not changed. | |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | The specified resource type is not supported as a next hop. | |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | Creating a route with this next hop type is not allowed. | |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | The FlowLog sampling interval exceeds the NIS traffic analyzer’s sampling interval. | |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | The specified NIS traffic analyzer is disabled. | |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | The specified NIS traffic analyzer does not exist. | |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | Insufficient available private IP addresses under the current vSwitch. | |
| 400 | OperationDenied.NoEnoughAvailablePrivateIps | The available private Ip number is not enough in your subnet. | Insufficient available private IP addresses in the subnet. | |
| 400 | OperationDenied.NormalNatExist | The operation is not allowed because of existing normalNat. | Operation not allowed; a standard NAT gateway exists in this VPC. | |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | The instance is not attached to CEN; this operation is prohibited. | |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | Cannot create a DDoS Protection (Enhanced) EIP because DDoS Native Protection service is not purchased. | |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | The EIP address pool instance is a shared resource and cannot be modified. | |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | Operation on a shared resource failed. | |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | The specified operation is prohibited because the route table contains route entries whose next hops point to non-cloud-box VBRs. | |
| 400 | OperationDenied.OtherSubnetCreating | The operation is not allowed because a subnet is being created. | The specified operation is prohibited because other vSwitches are being created. | |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | Cannot delete the current vSwitch because other subnets are undergoing operations. | |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | This operation is not supported for the current resource. Contact on-duty staff for assistance. | |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | Outbound cloud traffic billing is disabled; this operation is prohibited. | |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | Subscription instances are no longer supported for purchase. | |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | The NAT gateway has not enabled PrivateLink. | |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | Querying shared bandwidth instances connected to Cloud Data Transfer is not supported. | |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | Number of CIDRs to delete exceeds the number owned by the prefix list. | |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | Operation denied because the request was not called from the region where the address pool resides. | |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | Cannot delete the IPv4 gateway because routes to it exist. | |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | The specified operation is prohibited because router interfaces are in different zones. | |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface does not support IPv6. | |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | routerinterface does not support ipv6 | |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | The specified operation is prohibited because router interfaces point to different VPCs. | |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | The specified operation is prohibited because the route table is bound to a non-cloud-box vSwitch and cannot add routes pointing to cloud-box VBRs. | |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | Operation not allowed due to incorrect route table type. | |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | The specified gateway route table instance is not a border gateway route table. Please verify your input. | |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | Route entries cannot be created for the specified route table type. | |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | The specified SLB does not belong to any VPC. | |
| 400 | OperationDenied.SnatEntryStatusInvalid | The NAT gateway has SNAT entry in invalid status. | The SNAT entry status configured on the NAT gateway is invalid. | |
| 400 | OperationDenied.SubnetRouteV1Exist | The operation is not allowed because of existing subnetRouteV1. | Operation not allowed; subnet routing in this VPC does not meet specifications. | |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | Cannot directly switch a bound route table to a system route table. | |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | Cannot operate on PrefixList. | |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | Operating on PrefixList is not allowed. | |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bonded ENIs do not support being used as traffic mirror destinations. | |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | Gateway-type SLB endpoints do not support being used as traffic mirror destinations. | |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | The traffic mirror destination does not support the type of this traffic mirror source. | |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | The current traffic mirror session’s destination type does not support full-packet mirroring. | |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | VirtualPhysicalConnection lacks permissions or is overdue; this operation is not allowed. | |
| OperationDenied.TooManyDataQueried | Specified operation is denied as too many data to return. | The number of data entries to be returned has reached the upper limit. | ||
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | Full-packet mirroring is currently unsupported for traffic mirroring; TrafficMirrorSourceTruncateMode can only be set to 0 (default mode). | |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | The TR Attachment has not enabled IPv6 capability. | |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | This operation is not allowed; the user is not on the whitelist. | |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | The current operation is not allowed because your account has pending configuration change orders. | |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | Operation denied because only system route tables support route publishing. | |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | The EIP binding type of this NAT gateway does not support this operation. | |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | When a NAT gateway ENI exists in the traffic mirror source, the traffic mirror destination must be of SLB type. | |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | Operation denied because the route publishing target type is currently unsupported. | |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | Failed to modify the gateway route entry; the next hop must first be changed to a local route before customizing the next hop. | |
| 400 | OperationDenied.UseGatewayRouteEntryQueryInterface | Use listGatewayRouteTableEntries to describe gateway route entries. | To query gateway route table entries, use the listGatewayRouteTableEntries API. | |
| 400 | OperationDenied.VBRAssociateVPconn | The operation is not allowed because of VBRAssociateVPconn. | VBR does not allow binding to Vpconn. | |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | The VBR is currently loading or unloading a dedicated gateway; please retry later. | |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | The specified operation is prohibited because the added route entry’s next hop is a RI with a VBR peer, which cannot be in idle state. | |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | The specified operation is prohibited because the route table is bound to a cloud-box vSwitch and cannot add routes pointing to other cloud-box VBRs. | |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | Creating an IPv4 gateway is not allowed because an IPv4 gateway already exists in the VPC. | |
| 404 | OperationDenied.VpcIpv4GatewayEnabled | The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway. | Operation not allowed because the VPC hosting the NAT gateway has already enabled an IPv4 gateway. | |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | Operation denied because IPv6 capability is not enabled for this VPC. | |
| 400 | OperationDenied.VPconn | The operation is not allowed because of VPconn. | This operation is not supported for Vpconn type. | |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | Shared leased lines do not allow creating VBRs for other accounts. | |
| 400 | OperationDenied.VpconnVBRAssociatePconn | The operation is not allowed because of VpconnVBRAssociatePconn. | Operation failed because binding a Vpconn’s VBR to a Pconn is not allowed. | |
| 400 | OperationDenied.VpcPeerExist | The operation is not allowed because the VPC peer exists. | The specified operation is prohibited because the VPC contains a peering connection. | |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because the VpcPeer exists. | The specified operation is prohibited because the VPC contains a VPC peering connection. | |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because of VpcPeerExists. | The specified operation is prohibited because the VPC contains a VPC peering connection instance. | |
| 400 | OperationDenied.VpnConfiguring | The associated VPN gateway is being configured. You cannot update the attributes of the customer gateway. | The associated VPN gateway is being configured; user gateway configurations cannot be modified. | |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | Creating an IPv4 gateway is not allowed because a VPN gateway already exists in the VPC. | |
| 400 | OperationDenied.VpnFinancialLocked | The associated VPN gateway is financially locked. You cannot update the attributes of the customer gateway. | The associated VPN gateway is overdue and locked; user gateway configurations cannot be modified. | |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | The access device is disabled; VBR creation is not possible. | |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | Failed to generate tunnel ID for VPC NAT; please retry later. | |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | No available ENI exists on the attachment. | |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | An EIP is being added to a shared bandwidth, and deletion is not allowed. | |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | The specified address has already been allocated. | |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | The specified IP address is not within the vSwitch CIDR block. Modify it according to the API documentation parameter description and retry. | |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | VPC route addition failed after this operation. | |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_flowlog_public lacks the group cloud migration product tag; internal group users are not allowed to purchase it. | |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_trafficmirror_public lacks the group cloud migration product tag; internal group users are not allowed to purchase it. | |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | Insufficient consecutive EIP inventory. | |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | Front-end port allocation failed. | |
| 400 | OperationFailed.AllocateUnfamiliarIp | The operation failed because only IP addresses used within the last seven days can be allocated. | Specified EIP application is only allowed for IPs used within the last 7 days. | |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | The specified reserved CIDR block must not contain any already-used IP addresses. | |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | The current VPN instance is already bound to a certificate of the same type. | |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | Operation failed due to conflict with another entry—any port or any protocol type is involved. | |
| 400 | OperationFailed.AssociationExist | The association already exists. | Operation failed because the current resource is in a binding state. | |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | Operation failed due to existing binding operations. | |
| 400 | OperationFailed.AttachmentExist | The current VPC is already attached to a DHCP options set. | The current VPC is already bound to a DHCP options set instance and cannot be bound to another. | |
| 400 | OperationFailed.AttachmentNotExist | The current VPC is not attahced to a DHCP options set. | The current VPC is not bound to any DHCP options set instance; replacement is not allowed. | |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | This operation is prohibited because the specified Bandwidth exceeds the upper limit. | |
| 400 | OperationFailed.BandwidthOrVlanIdEmpty | The specified VBR bandwidth or VlanId is empty. | The selected VBR’s bandwidth or VLAN ID is empty. | |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | EIPs still exist in the shared bandwidth package; deletion is not allowed. | |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | Your basic information is incomplete. Please complete it first. | |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | You have not completed your personal basic information. Please complete it and retry. | |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | The BGP group AS numbers of VBRs in the switchover group must be identical. | |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | BGP peers already created for the current VBR conflict with ECR configuration. Delete the BGP configuration and retry. | |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | The architecture does not support BGP capability (single-tunnel bonding architecture VPN gateway). | |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | Binding the current resource to another account’s VPC or CEN failed. Verify permissions and retry. | |
| 400 | OperationFailed.CanNotUseEipInDnat | Operation failed because the EIP cannot be used to create a forward entry. | Operation failed: EIP cannot be used to create DNAT entries. | |
| 400 | OperationFailed.CenLevelNotSupport | When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP. | When the VPN gateway’s VPC is attached to a CEN with route synchronization enabled, BGP cannot be enabled on the VPN gateway. | |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | The route CIDR conflicts with an existing prefix list route. | |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | The number of CIDRs provided by the user exceeds cidrMaxCount. | |
| 400 | OperationFailed.CidrInUse | Operation failed because cidr is in use. | The CIDR block is currently in use. | |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | Operation failed: the CIDR block is in use. | |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | The specified vSwitch has insufficient available CIDR space to allocate a CidrReservation. | |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | The specified key is not empty; it cannot be cleared. | |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | Invalid product code. Please modify and retry. | |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | NAT session log delivery rule configuration failed. | |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | Session log configuration failed due to an internal service error. | |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | Operation failed: the new CidrBlock conflicts with existing routes. | |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | A disallowed ordering tag exists. Contact your distributor for resolution. | |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | Operation failed because NatIpCidr was created within the VPC CIDR. | |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | Operation failed because NatIpCidr was created outside the UserCidr. | |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | Your account balance is less than zero. Please recharge before purchasing. | |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | Operation failed because the default NatIP cannot be deleted. | |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | Operation failed because the default NatIPCidr cannot be deleted. | |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | Operation failed: a default VPC already exists. | |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | Operation failed: the default VPC does not exist. | |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | A default vSwitch already exists in the current zone. | |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | CEN route query failed. | |
| 400 | OperationFailed.DistibuteLock | The resource is locked and cannot be operated. | The resource is locked and cannot be operated on. | |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | The operation is locked by another request. | |
| 400 | OperationFailed.DnatInMiddleStatus | Operation failed because the status of the DNAT entry associated with the NAT gateway is abnormal. | Operation failed because the DNAT rule status on the NAT gateway is abnormal. | |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | The number of port range mappings per DNAT public IP must be less than 64. | |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | The number of port range mappings per DNAT public IP exceeds the limit. | |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | The number of port ranges exceeds the limit. | |
| 400 | OperationFailed.DnatQuotaExceed | Operation failed because the maximum number of forward entry is exceeded. | Operation failed because too many DNAT entries exist. | |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | Operation failed: the peer type of this RI is invalid for ECMP. | |
| 400 | OperationFailed.EcsMetricNotEnabled | The feature is not enabled for enhanced NAT gateway. | Enhanced NAT Gateway does not have this feature enabled. | |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | Binding failed because the ECS instance is migrating. | |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | ECS ENI quota does not meet requirements. | |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | An EIP cannot be bound to an ENI simultaneously in NAT mode and multi-EIP NIC-visible mode. | |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | Instance deletion failed because an EIP is bound to it. | |
| 400 | OperationFailed.EipInMiddleStatus | Operation failed because the status of EIP associated with the specified NAT gateway is abnormal. | Operation failed because the EIP bound to this NAT gateway has an abnormal status. | |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | Operation failed because the EIP instance status is invalid. | |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | This region is not managed under the service access domain name. | |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | NAT Gateway is not available in the current zone, or underlying resource inventory is insufficient. | |
| 400 | OperationFailed.EnhancedInventoryNotEnough | The enhanced NAT gateway inventory is insufficient in the specified zone. | Enhanced NAT Gateway inventory is insufficient in the current zone. | |
| 400 | OperationFailed.EnhancedQuotaExceed | Operation failed because the maximum number of enhanced NAT gateways in the same VPC is exceeded. | Operation failed because the number of enhanced NAT gateways in the current VPC exceeds the limit. | |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | Enhanced NAT gateway creation quota exceeded in the current VPC. | |
| 400 | OperationFailed.EnhancedRegion | Operation failed because enhanced NAT gateways are not available for sale in the specified region. | Operation failed because enhanced NAT Gateway is not available for sale in the current region. | |
| 400 | OperationFailed.EnhancedUserIsUnAuthorized | Operation failed because the user is not authorized to create an enhanced NAT gateway. | Operation failed because the user is not authorized to create enhanced NAT gateways. | |
| 400 | OperationFailed.EniTypeNotSupport | Operation failed because the ENI type is not supported. | The elastic secondary ENI type does not support the current operation. | |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | You have reached the maximum purchase limit. | |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | Operation failed because an IPv6 address in the IPv6 prefix is already in use. | |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | Failed to retrieve Express Connect resource status. Verify resource information and query again. | |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | Operation failed: only custom route entries support filtering by route entry ID or name. | |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | Operation failed: only custom route entries support filtering by route entry ID or name. | |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | Operation failed: account is overdue. | |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | DNAT entries do not allow the public IP address to equal the private IP address. | |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | Backend service failed to query ENI information. | |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | Operation not allowed: failed to retrieve NFV service list. | |
| 400 | OperationFailed.HavipBoundPortmap | Operation failed because Havip instance already bound portmap. | Operation failed because the HaVip instance is already bound to a port mapping. | |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | Invalid health check IP. | |
| 400 | OperationFailed.InformationIncomplete | Your information is incomplete. | Input information is incomplete. | |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | The specified instance does not exist in the current VPC. | |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | Failed to bind EIP to ECS because the ECS instance does not exist or is not a VPC-based instance. | |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | The current resource state does not support this operation. | |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | Unknown error. Please retry the operation; if the error persists, submit a ticket for assistance. | |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | The IPv6 instance you are operating on already has public bandwidth enabled; do not enable it repeatedly. | |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | This operation is prohibited because the specified bandwidth instance does not exist. | |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | This operation is prohibited because the bandwidth instance is in an unstable state. | |
| 400 | OperationFailed.InvalidCidrBlock | Operation failed because the specified network block is invalid. | The CIDR block is invalid. | |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | The VBR instance has not been authorized by the VPC instance; please authorize and retry. | |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | Failed to create the route entry because ECMP (Equal-Cost Multipath Routing) routes support only one non-RI (non-route-table-instance) type as the next hop. | |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | Operation failed: invalid next hop type. | |
| 400 | OperationFailed.InvalidStatus | Route entry is not allowed to operate in current status. | This route entry cannot be operated on in its current state. | |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | Application failed: the IP address is already locked. | |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | The current operation conflicts with the ENI's IP Prefix. | |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | The specified prefix CIDR must reside within the vSwitch reserved CIDR block. | |
| 400 | OperationFailed.IPsecServerExist | An IPsec server already exists in the VPN gateway. | An IPsec server already exists in the VPN gateway. | |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | Failed to bind EIP to IP because IPv4 Gateway is not enabled for this VPC. | |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | There exists a scenario where EIP-bound private IP addresses access the Internet; this functionality depends on the IPv4 Gateway, so the IPv4 Gateway cannot be deleted. | |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | The specified IP address is already allocated. | |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | The specified IPv6 address is already allocated. | |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | Operation failed: IPv6 is already enabled. | |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | Operation failed: the bandwidth of the IPv6 instance exceeds the maximum bandwidth limit of the target gateway specification. | |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | Operation failed: the specified IPv6 CIDR block is already in use. | |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | The input IPv6 CIDR block overlaps with an existing CIDR block. | |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | Operation failed: the specified IPv6 CIDR block is already in use. | |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | Operation failed: the specified IPv6 CIDR block is not reserved. | |
| 400 | OperationFailed.IPv6Disabled | Operation failed because IPv6 is not enabled for the vSwitch. | Specified operation failed because IPv6 is not enabled. | |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | The IPv6 instance already has an "Egress-Only Rule" configured. | |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | Operation failed because the IPv6 gateway is still in use. | |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | The specified Ipv6Address and Ipv6Gateway are not in the same VPC; please verify your input. | |
| 400 | OperationFailed.Ipv6GatewayInUse | The IPv6 gateway is in use. | Cannot modify VPC attributes because the IPv6 gateway is still in use. | |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | The VPC containing the IPv6 address you are operating on does not have an Ipv6Gateway instance; please create an Ipv6Gateway first. | |
| 400 | OperationFailed.Ipv6InstanceExist | Operation failed because vswitch has ipv6 instance. | IPv6 instances exist in the vSwitch. | |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | IPv6 routes exist in the VPC; disabling IPv6 is prohibited. | |
| 400 | OperationFailed.IpV6VSwitchInuse | Operation failed because some vswitch ipv6 is in use. | The IPv6 vSwitch is still in use. | |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | The previous token request is being processed; please try again later. | |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | Operation failed because NAT session log delivery permission is not granted. | |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | The VPN gateway is not bound to any certificate. | |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | The current VPN connection is not associated with any certificate. | |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | The DNS domain resource is in an unstable state; please retry later. | |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | Operation not supported: NAT instance architecture mismatch. | |
| 400 | OperationFailed.NatGatewayNotExist | The specified NatGateway does not exist. | Operation failed: NAT gateway does not exist. | |
| 400 | OperationFailed.NatGwBandwidthQuotaExceed | The total bandwidth of the EIP bound to the NAT gateway exceeds the quota. | Operation failed because the total bandwidth of EIPs bound to the NAT gateway exceeds the limit. | |
| 400 | OperationFailed.NatGwBindWithBandwidthPackage | Operation failed because the NAT gateway is bound to bandwidth packages. | Operation failed because the NAT gateway instance is bound to a NAT bandwidth package. | |
| 400 | OperationFailed.NatGwRouteInMiddleStatus | Operation failed because the status of the route entry associated with the NAT gateway is abnormal. | Operation failed because the route entries associated with the NAT gateway are in an abnormal state. | |
| 400 | OperationFailed.NatTypeInvalid | Only enhanced NAT gateway supports the operation. | Only enhanced NAT gateways support this operation. | |
| 400 | OperationFailed.NatTypeNotEnhanced | Operation failed because the specified NAT gateway type is not enhanced. | Operation failed because the specified NAT gateway type is not enhanced. | |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | Your account balance is less than zero; please recharge before purchasing. | |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | No available resources in the region. | |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | This operation is unsupported because the IPv6 instance has no public bandwidth. | |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | You have not completed real-name verification, which is required for purchase. Please log in to the User Center to complete real-name verification. | |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | No valid payment method exists in your account. | |
| 400 | OperationFailed.NoPermission | You are not authorized to perform the operation. | You do not have permission to perform this operation. | |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | The VPN service lacks permission to operate your IDaaS instance. | |
| 400 | OperationFailed.NormalInventoryNotEnough | Operation failed because the inventory of standard NAT gateway is insufficient. | Operation failed due to insufficient inventory of standard NAT gateways. | |
| 500 | OperationFailed.NormalInventoryNotEnough | Standard NAT gateways are no longer offered. You can create enhanced NAT gateways and set the correct natType. | Standard NAT gateways are no longer supported for creation; please create an enhanced NAT gateway and ensure the NatType parameter is correctly configured. | |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | The VBR bandwidth value does not match the bandwidth value of its associated shared physical connection. | |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | Modifying the bandwidth specification of a virtual router created on a shared port is not supported. | |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | Operation failed: the PrefixList does not contain the specified reference relationship. | |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | Route table and gateway unbinding failed because no binding relationship exists. | |
| 400 | OperationFailed.NotSupportBizType | The specified instance type does not support the operation. | Operation failed because the specified instance type does not support this operation. | |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | The specified next hop does not support IPv6. | |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | The route interface does not support IPv6. | |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | The billing method you specified requires CDT billing; please enable CDT and retry. | |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | Shared PrefixList cannot be modified. | |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | The route next hop instance is under maintenance lock and cannot be operated on. | |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | Operation failed because the instance is under maintenance lock. | |
| 400 | OperationFailed.PconnAllocateVlan0 | Vlan 0 Vbr cannot share the physical connection with another Vbr. | VLAN 0 on a physical dedicated line cannot coexist with other VBRs. | |
| 400 | OperationFailed.PconnExistVlan0Vbr | The physical connection has VLAN 0 VBR. You cannot create another VBR. | A VLAN 0 VBR already exists on the dedicated line; creating additional VBRs is not allowed. | |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | Operation failed because egress traffic is not enabled. | |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | Operation failed because outbound cloud traffic service is not enabled. | |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | When adding a BGPGroup, the peer autonomous system number cannot be the same as the local autonomous system number; please verify parameters and retry. | |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | The shared port is in an overdue-lock state; VLAN modification is not allowed. | |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | The shared port is in a terminated state; VLAN modification is not allowed. | |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | The private IP address you provided does not exist. | |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | The current NAT gateway does not support modifying PrivateLinkMode. | |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | Failed to query account information during order placement. | |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | Failed to query Attachment information. | |
| 400 | OperationFailed.QueryCenEntry | Operation is denied because getting CEN route entry has failed. | Query failed because the CEN route could not be retrieved temporarily. | |
| 400 | OperationFailed.QueryCenIpv6Status | Failed to query the IPv6 status of the specified VPC in CEN. | Failed to query the IPv6 status of this VPC in CEN. | |
| 400 | OperationFailed.QueryNetworkInterfaceInfo | Failed to query network interface information. | Failed to query ENI information. | |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | Failed to query order; error occurred while calling the trade application. | |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | Failed to query price during order creation. | |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | Failed to query instance subscription information. | |
| 400 | OperationFailed.QuotaExceedPerTimeWindow | The maximum number of scheduled migration within the specified time window is exceeded. | Operation failed because the reservation limit for this time window has been reached. | |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | Your current quota is insufficient. Please contact your channel partner to increase your quota. | |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | Your current quota is insufficient. Please contact your channel partner to increase your quota. | |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | Dear customer, Alibaba Cloud plans to optimize and adjust services in this region, and cloud services here will be discontinued. To ensure business continuity and smooth data migration, you cannot place new purchase orders at this time. Thank you for your understanding and support. | |
| 400 | OperationFailed.RegionNotSupport | The specified region does not support the feature. | This feature is not supported in the current region. | |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | The specified reserved CIDR does not meet reservation requirements. | |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | Operation failed because the resource is in a bound state. | |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | The EIP address pool has been shared with other users and cannot be deleted. | |
| 500 | OperationFailed.ResourceNotEnough | Insufficient resources. | Requested resources are insufficient. If you still need them, please submit a ticket. | |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | Requested resources are insufficient. If you still need them, please submit a ticket. | |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | Operation failed because the resource UID does not exist. | |
| 400 | OperationFailed.RiskControl | Risk control check failed. | We detected a security risk with your payment method. Please continue verification via the link in the email or console message, then resubmit your order after verification. | |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to another VPN on the same network block. | A route pointing to another VPN gateway already exists for the same CIDR in the VPC route table. | |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to a non-RI and non-VPN next hop on the same network block. | A route pointing to resources other than RI or VPN gateway already exists for the same CIDR in the VPC route table. | |
| 404 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | Operation conflicts with an existing route and fails. | |
| 400 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the route to create conflicts with the client IP pool of the IPsec server. | The route destination CIDR conflicts with the IPsec server client CIDR. | |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | Route configuration conflicts with the IPsec server. | |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | The route entry associated with the instance is in a non-stable state; please retry later. | |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | Failed to validate sales conditions using the sub-project. | |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | Operation failed because the active route entry quota has been exceeded. | |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | Operation failed because this type of active route entry is not supported. | |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | Operation failed because the standby route entry quota has been exceeded. | |
| 404 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | This operation is not allowed on managed instances. | |
| 400 | OperationFailed.SnatInMiddleStatus | Operation failed because the status of the SNAT entry of the specified NAT gateway is abnormal. | Operation failed because the SNAT entry status of the specified NAT gateway is abnormal. | |
| 400 | OperationFailed.SnatIpsTooMany | The maximum number of IP addresses is exceeded in the SNAT pool. | Too many IPs in the SNAT pool. | |
| 400 | OperationFailed.SnatQuotaExceed | Operation failed because the maximum number of SNAT entry is exceeded. | Operation failed because the number of SNAT entries exceeds the limit. | |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | SSL functionality is not supported for private network-type VPN gateways. | |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | Residual BGP routes prevent disabling automatic route propagation. | |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | Operation failed. | |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | Resource transaction information synchronization failed. | |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | System is busy; please retry later. | |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | The specified VSwitchCidrReservationCidr must not include system-reserved IP addresses. | |
| 400 | OperationFailed.TargetUserPconnTrafficNotEnable | The operation failed because of TargetUserPconnTrafficNotEnable. | The target user has not enabled outbound traffic, so the operation failed. | |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | Order creation failed due to invalid token. | |
| 400 | OperationFailed.UnpaidBillsExist | The account has unpaid bills. Please pay your overdue bill first. | This account has unpaid orders. | |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | The instance type you selected requires upgrading to CDT billing. Please upgrade CDT and retry. | |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | VPC still has static routes pointing to ECR; disassociation with ECR is not allowed. | |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | Operation failed; rate limiting is not allowed. | |
| 400 | OperationFailed.VbrBindedPconn | The operation failed because of VbrBindedPconn. | Operation failed because the VBR is bound to a PCONN. | |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | VBR is already bound to a PCONN. | |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | The VBR is locked; please retry later. | |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The operation failed because of VirtualPhysicalConnectionExistVBR. | A VBR already exists for the VirtualPhysicalConnection. | |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | A VBR has already been created for the shared leased line; further VBR creation is not allowed. | |
| 400 | OperationFailed.Vlan0VbrUnSharePconn | VLAN 0 VBR cannot share the physical connection with another VBR. | Another VLAN 0 VBR already exists on this leased line; creating a VLAN 0 VBR is not allowed. | |
| OperationFailed.VlanIdAlreadyInUse | The specifed vlanId has been used. | The VLAN ID is in use. | ||
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | vlanId is already in use. | |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | Current operation is not supported because IPv6 is not enabled for the VPC. | |
| 400 | OperationFailed.VpcNotExist | The specified VPC does not exist. | The specified VPC does not exist. | |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | Operation failed; VPC not found. | |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | VPconn cannot be operated. | |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | Shared port still exists; this physical port cannot be terminated. | |
| 400 | OperationFailed.VPconnCreated | The operation failed because VPconn is already created. | VPconn has already been created; duplicate creation is not required. | |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | VPconn cannot be created. | |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | VPC system route table has not enabled accepting propagated routes. | |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | A VPC supports only one dynamic route learning source; remove the VPC from ECR. | |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | A VPC supports only one dynamic route learning source; disable route synchronization for this VPC in the Transit Router. | |
| 400 | OperationFailed.VpnConnectionExist | Auto propagate cannot be closed when VPN connections with BGP enabled exist. | Automatic route propagation cannot be disabled when a BGP-enabled VPN connection exists. | |
| 400 | OperationFailed.VRouterNotExist | Operation failed because the VRouter does not exist. | Operation failed because the virtual router does not exist. | |
| 400 | OperationFailed.VswBindedAcl | The operation failed because a network ACL is associated with the specified VSwitch. | Operation failed because the specified vSwitch is bound to a Network ACL. | |
| 400 | OperationFailed.VswBindedRouteTable | The operation failed because a custom route table that contains subnet routes is associated with the specified VSwitch. | Operation failed because the vSwitch is bound to a subnet route table. | |
| 400 | OperationFailed.VswHasAcl | Operation failed because the specified VSwitch is associated with a network ACL. | Operation failed because the specified vSwitch is associated with a Network ACL. | |
| 400 | OperationFailed.VswHasRouteTable | Operation failed because the specified VSwitch is associated with a route table. | Operation failed because the specified vSwitch is associated with a subnet route table. | |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | The specified VSwitchCidrReservationCidr conflicts with an existing VSwitchCidrReservation CIDR. | |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | The specified VSwitch has not enabled IPv6; enable IPv6 before performing this operation. | |
| 400 | OperationFailed.VSwitchNoAvailableIp | Operation failed because the number of available IP addresses of the specified VSwitch is insufficient. | Operation failed because the vSwitch has insufficient available IP addresses. | |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | The specified vSwitch was not found. | |
| 400 | OperationFailed.VSwitchNotInVpc | The specified VSwitch and NAT gateway must be in the same VPC. | The vSwitch and NAT gateway must belong to the same VPC. | |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | The vSwitch is being created. | |
| 400 | OperationFailed.VswNotBelongToVpc | Operation failed because the specified VSwitch is not bound to the same VPC with NAT gateway. | Operation failed because the vSwitch and NAT gateway do not belong to the same VPC. | |
| 400 | OperationFailed.VswNotExist | The specified VSwitch does not exist. | The specified vSwitch does not exist. | |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | Current operation is not supported because the Zone ID does not match. | |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | Operation not supported. | |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | Operation not supported for accessing AccessDevice. | |
| 400 | OperationUnsupported.action | This action is not support. | This operation is not supported. | |
| 400 | OperationUnsupported.AdvancedFeature | Advanced features of the vpc is unsupported. | This advanced feature is not supported. | |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | The specified number of IP addresses to allocate exceeds the upper limit. Modify the parameter according to the API documentation and retry. | |
| 400 | OperationUnsupported.BindMultipleType | You cannot bind HaVip to multiple instance types. | Binding both an ECS instance and an ENI simultaneously is not allowed. | |
| 400 | OperationUnsupported.BindOnFreeNetworkInterface | The network interface must be attached to an ECS instance. | The ENI must be bound to an ECS instance. | |
| 400 | OperationUnsupported.BindOnMultipleVswitch | The bound instance and HaVip must be on the same vSwitch. | The bound instance and the HaVip must reside in the same vSwitch. | |
| 400 | OperationUnsupported.BindOnSameEcs | You cannot bind two network interfaces on the same ECS instance. | Binding two ENIs from the same ECS instance is not allowed. | |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | Bonding ENIs without a slave are not supported for the current operation. | |
| 400 | OperationUnsupported.CenIpv6Enabled | The IPv6 feature is enabled in CEN. | IPv6 functionality is already enabled in CEN. | |
| 400 | OperationUnsupported.CidrConflict | The specified CIDR block conflicts with an existing SNAT entry. | The CIDR block you specified conflicts with an existing SNAT entry. | |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | The destination IPv6 CIDR block specified in the route entry overlaps with the vSwitch CIDR block. | |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | The destination IPv6 address you specified in the route entry falls within the vSwitch CIDR block. | |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | The DhcpOptionsSet in this region does not support custom LeaseTime. | |
| 400 | OperationUnsupported.DhcpOptionsSet | The DHCP options set feature in this region is not supported. | DHCP options set functionality is temporarily unavailable in this region. | |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | The current operation is not supported because IPv6 functionality is not yet enabled. | |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | Creating an outbound-only rule on an unbound IPv6 instance is not supported. | |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | Outbound-only rules are not supported on Free-tier IPv6 Gateways. Upgrade your IPv6 Gateway to Enterprise or Enterprise Enhanced edition. | |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | Outbound-only rules at the vSwitch granularity are not supported in the specified region. | |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | An EIP in binding status cannot be used to create SNAT entries. | |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | The current EIP does not belong to an NAT bandwidth package. | |
| 400 | OperationUnsupported.EipNatGWCheck | Operation is not supported because the relation check of EIP and NAT gateway has failed. | The operation is not supported due to EIP and NAT Gateway association validation failure. | |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | BGP is not supported in the current VPN version. | |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | BGP is not supported in the current region. | |
| 400 | OperationUnsupported.EnhancedCURegion | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | Enhanced NAT Gateways with CU billing are not supported in the current region. | |
| 400 | OperationUnsupported.EnhancedRegion | Enhanced NAT Gateway is not supported in this region. | Enhanced NAT Gateways are not supported in the current region. | |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | This operation is prohibited due to financialLocked. | |
| 400 | OperationUnsupported.ForwardEntry | Duplicated destination ip port is unsupported. | Duplicate destination IP and port combinations are not supported. | |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | Allocating detached IPv6 address instances is not supported in the current region. | |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | The Ipv6Prefix feature is not supported in this region. | |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | Allocating detached private IPv6 addresses is not supported. | |
| 400 | OperationUnsupported.HavipBindType | You cannot bind HAVIP to network interface in the specified region. | Binding ENIs is not supported in your region. | |
| 400 | OperationUnsupported.IpNotInCbwp | The specified eip not exist in the commonBandwidthPackage. | This EIP does not exist in the bandwidth package. | |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | The specified IPsec PFS is not supported. | |
| 400 | OperationUnsupported.IPsecServer | The current version of the VPN gateway does not support IPsec server. | IPsec server functionality is not supported in the current VPN Gateway version. | |
| 400 | OperationUnsupported.IpType | The EIP type does not support the operation. | Adding this EIP type is not allowed. | |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | This IPv6CidrBlock is not supported. | |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | ECMP routing is not supported for IPv6. | |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | Creating IPv6 routes with the primary ENI as the next hop is not allowed. | |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | IPv6 functionality is not supported in the current region. | |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | IPv6 functionality is not supported for the current operation. | |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | IPv6 is not supported in this region. | |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | VBR does not support IPv6 routing. | |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | ULA addresses are not supported for the current operation. | |
| 400 | OperationUnsupported.ModifyBandwidth | You cannot modify the bandwidth of the VBR in sale. | Bandwidth modification is not allowed for a sold VBR. | |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | The modified bandwidth parameter is not supported for saving. | |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | The operation is not supported because the specified route next-hop instance is bound to multiple IPv6 addresses. | |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | Specifying a next hop bound to multiple IPv6 addresses is not allowed. | |
| 400 | OperationUnsupported.NatConvert | The NAT gateway conversion function is not supported. | NAT Gateway type conversion is not supported. | |
| 400 | OperationUnsupported.NATGWBONDINGENI | Operation is unsupported because the specified network interface is created with enhanced NAT gateway. | Operation failed because the bound ENI was created by an enhanced NAT Gateway. | |
| 400 | OperationUnsupported.NormalInventoryNotEnough | Operation is unsupported because the inventory of standard NAT gateway is insufficient. | Operation failed due to insufficient inventory of standard NAT Gateways. | |
| 400 | OperationUnsupported.NotPConnOwner | Only the owner of the leased line can update the bandwidth. | Non-dedicated line owners are not allowed to update bandwidth. | |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | This operation is not supported because a VPC can have only one IPv6 Gateway. | |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | Only standard ENIs are supported as next hops. | |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | Only ULA-type IPv6 addresses are supported. | |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | Specification modification is not supported for pay-as-you-go NAT Gateways. | |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | IPv6 public bandwidth does not support subscription billing. Refer to the API documentation and retry. | |
| 400 | OperationUnsupported.PrePaidPyByLcu | The operation failed because the subscription NAT gateway does not support the pay-by-LCU billing method. | Subscription-based NAT Gateway instances do not support PayByLCU billing. | |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | Private GUA IPv6 addresses are not supported for the current operation. | |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | Publishing prefix list routes is not supported. | |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | Publishing system routes is not supported. | |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | QoS creation is not supported for the current user. Contact your business manager. | |
| 400 | OperationUnsupported.RegionAndServiceLocationNotMatch | Operation is not supported because the region and service location do not match. | The operation is not supported because the region and service area are unsupported. | |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroup is not supported in this region. | Resource group functionality is not enabled. | |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | The operation is not supported; resource group ID is not supported in Financial Cloud. | |
| 400 | OperationUnsupported.RouterInterfaceExist | Operation failed because the VPC has a router interface. | Operation failed because the VPC has router interfaces. | |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | This route type is not supported. | |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | Operation is not allowed because the instance belongs to a managed resource. | |
| 400 | OperationUnsupported.SetDPD | Current version of the VPN does not support setting DPD. | DPD functionality is not supported in the current VPN Gateway version. | |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | You cannot set the bandwidth of VBR with multiple physical connections. | Setting bandwidth is not supported for VBR multi-PCONN. | |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | Multi-physical connection bandwidth is not supported. | |
| 400 | OperationUnsupported.SetNatTraversal | Current version of the VPN does not support setting NAT traversal. | NAT traversal functionality is not supported in the current VPN Gateway version. | |
| 400 | OperationUnsupported.SkipConstruction | You are not authorized to skip the construction. | You do not have permission to skip construction and proceed to payment. | |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | Skipping the construction step to proceed is not allowed. | |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | Specifying the private IP parameter is not allowed when creating IPv6 routes. | |
| 404 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | Disassociating the system route table is not allowed. | |
| 400 | OperationUnsupported.ULA | %s is unsupported. | ULA addresses are not supported for the current operation. | |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | Creating unbound IPv6 address instances is not supported in this region. | |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | Creating unbound IPv6 prefix CIDR blocks is not supported in this region. | |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | The next-hop type of the route entry is not supported for publishing. | |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | Operation failed because the VBR is already associated with a CEN. | |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | The VBR is already bound to a physical connection gateway. Remove the VBR from the physical connection gateway and retry. | |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | The VBR is bound to multiple pconns. | |
| 400 | OperationUnsupported.VirtualBorderRouterEnableIPv6 | The operation failed. The device or region does not support IPv6 functions. | Operation failed because the device or region does not support IPv6. | |
| 400 | OperationUnsupported.VpcAttachedCen | Operation failed because the VPC is attached to CEN. | Operation failed because the VPC is attached to a CEN. | |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | The peer router interface has been deleted. | |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested flowLog service. Ensure you have subscribed to the service you are trying to use. | |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested IP address pool service. Ensure you have subscribed to the service you are trying to use. | |
| 400 | OptInRequired.TrafficMirror | You need to subscribe to the traffic mirror service first. | Traffic mirroring service is not enabled. | |
| ORDER.ACCOUNT_STATUS_ILLEGAL | The account status is invalid. | |||
| ORDER.ARREARAGE | The account balance is insufficient. | |||
| ORDER.BID_USER_ ORDER_FORBIDDEN | You cannot purchase preemptible instances with this account. | |||
| ORDER.INSTANCE_HAS_INACTIVE_CHANGE | Processing changes. | |||
| ORDER.INST_HAS_UNPAID_ORDER | The account has unpaid orders. | |||
| ORDER.INST_HAS_UNSETTLED_BILLS | The account has unpaid orders. | |||
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | You have not completed real-name verification. Please go to the Account Center to complete it. | |
| ORDER.NOT_ENOUGH_ACTIVITY_STOCK | The activity inventory is insufficient. | |||
| ORDER.NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | |||
| ORDER.OPEND | The instance is enabled. | |||
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | Outbound traffic service is already enabled; use it in the console. | |
| ORDER.ORDER_AMOUNT_ILLEGAL | The order amount is invalid. | |||
| ORDER.PERIOD_INVALID | The purchase cycle is invalid. | |||
| 400 | ORDER.QUANTITY_INVALID | User quota has exceeded the limit. | You have reached the maximum number of EIPs allowed for your account. You can increase your EIP quota in Quota Management. | |
| ORDER.QUOTA_EXCEEDED | The number of instances that you purchased exceeds the upper limit. | |||
| ORDER.SYS_CONSTRAINT_INVALID | The order system has not passed constraint validation. | |||
| 400 | OrderError | Failed to create the order. | Failed to create order. Please try again later. | |
| 400 | OrderError.EIP | Failed to place an order. | Failed to place order. | |
| 400 | OrderError.EIP | The account failed to create an order. | Failed to place order. | |
| 400 | OrderError.EIP | The Account failed to create order. | Failed to place order. | |
| OrderFailed | The system failed to create the order. | |||
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | Failed to create order due to concurrent operations. | |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | Invalid parameter natGatewayId. | |
| 400 | Parameter.Illegal | The parameter is illegal. | Invalid parameter. | |
| ParameterIllegal | ipCount | IpCount is set to an invalid value. | ||
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | Invalid rule entry name. | |
| 400 | ParameterInvalid | Invalid parameter. | Invalid input parameter. | |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | Invalid rule entry name length. | |
| ParameterMismatch.Role-Spec | The specified Spec and Role mismatch. | The router interface specification and role do not match. | ||
| PARAMETER_MUST_NOT_NULL | The specified physical connection id or vbrId must not be null. | VbrId and PhysicalConnectionId are not specified. | ||
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | Operation conflict: modifying Ipv6Cidr and DisableIpv6 simultaneously is not allowed. | |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId and BandwidthPackageId are mutually exclusive. | |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | The provided Ipv6AddressId and Ipv6InternetBandwidthId do not belong to the same instance. | |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId and RouteTableIdOrDestCidrBlock are mutually exclusive. | |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | When creating an SNAT entry for a NAT gateway instance, SnatIp and NetworkInterfaceId cannot be specified simultaneously. | |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId and VpnConnectionId are mutually exclusive. | |
| ParamsInvalid | Invalid request parameters. | |||
| PAY.ACCOUNT_BOOK_NOT_EXIST | The specified account book does not exist. | |||
| PAY.AMOUNT_LIMIT_EXCEEDED | The amount exceeds the upper limit. | |||
| PAY.COUPON_NOT_EXIST | The coupon does not exist. | |||
| PAY.COUPON_NOT_MEET_CONSUMPTION_RULE | The specified coupon is invalid and cannot be used. | |||
| PAY.CURRENCY_INCONSISTENCY | The currency does not match. | |||
| PAY.CURRENCY_NOT_SUPPORTED | This account does not support the currency. | |||
| PAY.GET_PAY_URL_ERROR | An exception occurred while getting the top-up URL. | |||
| PAY.INSUFFICIENT_BALANCE | The account balance is insufficient. | |||
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | Insufficient account balance. | |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | Insufficient account balance. | |
| PAY.INVALID_AMOUNT | The payment amount is invalid. | |||
| PAY.INVALID_CREDIT_CARD | The specified credit card is invalid. | |||
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | Invalid charge. | |
| PAY.NO_CREDIT_CARD | This account does not have a credit card added. | |||
| PAY.PAYMENT_PARAMETER_INVALID | The payment parameters are invalid. | |||
| PAY.PAY_ORDER_FAILED | The system failed to complete the payment. Try again later. | |||
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | Lingxiao failed to query the current user's托管 relationship. | |
| PAY.QUERY_QUOTA_BOOK_FAILED | The system failed to query the user quota. | |||
| PAY.REFUND_FAILED | An error occurred while refunding. | |||
| PAY.STORED_CARD_NOT_EXIST | The specified stored-value card does not exist. | |||
| PAY.TAX_CALC_FAILED | The system failed to calculate tax. | |||
| PAY.USER_DECLINED | The user refuses to pay. | |||
| PAY.WITHHOLDING_AGREEMENT_ILLEGAL | The tax withholding agreement is invalid. | |||
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | Physical connections containing more than one cross-account VBR do not support fault drills. | |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | Physical connections containing more than one shared physical connection do not support fault drills. | |
| PHYSICAL_NOT_ALLOW_ASSOCIATE_VBR | The specified operation not allow. | The Express Connect circuit is associated with a VBR and the operation cannot be performed. | ||
| 400 | PHYSICAL_NOT_ASSOCIATE_TO_VBR | The specified PhysicalConnection have not associate to the vbr. | No VBR has been created for this physical connection. | |
| PRICE.INQUIRY_FAILED | Pricing query failed. | |||
| PRICE.INVALID_INQUIRY_PARAMETER | The specified pricing query parameters are invalid. | |||
| PRICE.PRICING_PLAN_NOT_FOUND | The specified pricing scheme does not exist. | |||
| PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan is not matched. Submit a ticket. | |||
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | Product pricing plan not found. | |
| 400 | Price.SystemError | Price inquiry failed. | Quotation failed. Please try again later. | |
| PRICE.TAXING_ERROR | The system failed to calculate tax. | |||
| PRODUCT.INSTANCE_RELEASED | The instance is released. | |||
| PRODUCT.INSTANCE_TYPE_NOT_EXIST | The specified instance type does not exist. | |||
| PRODUCT.INSTANCE_TYPE_NOT_SUPPORTED | This instance type is unavailable for this account. | |||
| PRODUCT.INSUFFICIENT_STOCK | The operation failed because resources are insufficient. | |||
| PRODUCT.NOT_AVAILABLE_IZ | The specified zone is not supported. | |||
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | The specified project or Logstore does not exist. | |
| PURCHASE.NO_VAILD_PURCHASE | The purchase is invalid. | |||
| PURCHASE.PURCHASE_QUERY_FAILED | The specified purchase record cannot be found. | |||
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | The purchase quantity exceeds the maximum limit. | |
| QUANTITY_INVALID | The number of instances exceeds the upper limit. | |||
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | No connection logs found for this VPN connection. | |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | The number of EIPs that can be bound in multi-direct mode exceeds the limit. | |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | The number of Network ACL rule entries exceeds the limit. | |
| QuotaExceed.RouterInterface | Living RouterInterface quota exceeded. | The number of active router interfaces has reached the upper limit. | ||
| QuotaExceeded | Route entry quota exceeded in this route table. | The number of route entries in the route table has reached the upper limit. | ||
| 400 | QuotaExceeded | Forward entry quota exceeded in this route table. | A custom route table cannot contain more than 200 custom route entries; you can apply for an increase on the Quota Management page. | |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | The maximum number of route entries for the prefix list exceeds the maximum allowed by the associated route table. | |
| 400 | QuotaExceeded | RiPerUser quota exceeded | The number of peering connection router interfaces created by the current user has reached the upper limit. | |
| 400 | QuotaExceeded.AttachVpcNumber | The maximum number of VPCs that can be attached to a DHCP options set is exceeded. | The number of VPCs that can be associated with a single DHCP options set instance has exceeded the quota. | |
| QuotaExceeded.BandwidthPackageCountOnNatGateway | BandwidthPackage count limit on one NatGateway exceeded. | The number of NAT service plans has reached the upper limit. You can associate up to four NAT service plans with a NAT gateway. | ||
| 400 | QuotaExceeded.BandwidthPackageIps | The specified ipCount exceeded quota. | The number of IP addresses exceeds the limit; you can apply for an increased quota on the Quota Management page. | |
| 400 | QuotaExceeded.Bgp | bgp peer count per vbr quota exceed. | The number of BGP peers on the physical router has reached the quota. | |
| QuotaExceeded.Bgp | bgp group count per vbr quota exceed. | The number of BGP groups in the VBR has reached the upper limit. | ||
| QuotaExceeded.BgpNetwork | bgp network count per vbr quota exceed. | The number of BGP networks in the VBR has reached the upper limit. | ||
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | The number of VSwitchCidrReservations exceeds the quota. | |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | The number of CidrReservations you created has exceeded the limit. | |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | Quota exceeded. | |
| 400 | QuotaExceeded.DomainNameServers | The maximum number of domain name servers cannot exceed 4. | The number of configured DomainNameServers exceeds four. | |
| 400 | QuotaExceeded.Eip | Elastic IP address quota exceeded. | The number of EIPs exceeds the quota limit; if you require more quota, you may apply to increase your EIP quota or consider using a NAT gateway. | |
| 400 | QuotaExceeded.EipNumForModifyEipBondType | The quota of %s is exceeded, binded: %s, quota: %s. | The number of EIPs allowed when modifying the EIP binding type exceeds the limit. | |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | The quota for mirror sessions associated with the traffic mirror filter condition has been exceeded. | |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | The maximum number of flow log instances has been reached. | |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | The DNAT session many-to-one quota has been exceeded. | |
| QuotaExceeded.freePconnPerAP | free physical connections count excceeded. | The quota on Express Connect circuits is exhausted. | ||
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | The quota for physical connections that a user can create has been exceeded; contact your administrator to increase the quota and retry. | |
| QuotaExceeded.freevbr | Free virtual boarder router quota exceed. | The number of VBRs exceeds the upper limit. | ||
| 400 | QuotaExceeded.FullNatEntry | The quota of %s is exceeded, usage %s/%s. | The number of FullNatEntry instances has exceeded the quota. | |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | The quota for gateway route tables per VPC has been reached. | |
| QuotaExceeded.GlobalAccelerationInstance | The number of GA instances reaches the upper limit. | |||
| 400 | QuotaExceeded.GUAIpv6CidrBlock | GUAIpv6CidrBlock quota exceeded. | The GUAIpv6CidrBlock quota limit has been reached. | |
| QuotaExceeded.HaVip | Living HaVip quota exceeded. | The number of active HAVIPs exceeds the upper limit. | ||
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | The Ipv6EgressRules quota has been exceeded. | |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | The specified IPv6 prefix mask exceeds the quota. | |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | The quota for mirror sessions that can be associated with a single ENI has been exceeded. | |
| QuotaExceeded.Nqa | nqa count per vbr quota exceed. | The number of Network Quality Analyzers (NQAs) has reached the upper limit that is supported by the VBR. | ||
| 400 | QuotaExceeded.NumberOfEip | Binded eip Quota exceed on this NatGw. | The number of EIPs bound to this NAT gateway has exceeded the quota limit. | |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | The maximum number of policy-based routing entries has been reached. | |
| QuotaExceeded.pConnPerAP | Physical connection count per ap quota exceed. | The number of Express Connect circuits that are connected to the specified access point has reached the upper limit. | ||
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | The quota for physical connections per access point has been exceeded; contact your administrator to increase the quota. | |
| 400 | QuotaExceeded.PolicyBasedRoute | The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s. | The policy-based routing entry quota has been reached; there are currently %s entries, and %s will be created in this operation, with a maximum of %s entries. | |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | The IP address quota in the address pool has been exceeded. | |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | The number of prefixes exceeds the quota. | |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | The provided maximum entryCount exceeds the threshold. | |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | The maximum number of route entries allowed for the prefix list exceeds the limit. | |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | The number of prefix lists a user can create exceeds the threshold. | |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | Your PublicIpAddressPool count has reached the quota; please increase the quota before proceeding. | |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | The number of QoS policies for the current user exceeds the limit; contact your business manager for resolution. | |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | The number of high-priority queues in the QoS policy exceeds the specification; contact your business manager to increase the quota if needed. | |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | The sum of bandwidth percentages for normal-priority queues in the QoS policy exceeds the specification. | |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | The number of normal-priority queues in the QoS policy exceeds the specification; contact your business manager to increase the quota if needed. | |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | The number of QoS rules in the QoS queue exceeds the limit; contact your business manager to increase the quota if needed. | |
| 400 | QuotaExceeded.RegionDhcpOptionsSet | The quota of dhcpOptionsSet in the region is exceeded. | The number of DHCP options set instances a single user can create exceeds the quota. | |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | The specified ReservedCidrMask is invalid; please re-enter it according to the request parameter requirements. | |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | The VPC route table quota has been exceeded. | |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | The VBR quota has been exceeded. | |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | The number of traffic mirror sessions has exceeded the limit. | |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | The quota for traffic mirror sessions that can be associated with a single SLB instance has been exceeded. | |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | The quota for sources that can be associated with each traffic mirror session has been exceeded. | |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | The number of mirror sources associated with this mirror destination exceeds the limit. | |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | Quota exceeded. | |
| 400 | QuotaExceeded.TrafficMirrorFilter | The maximum number of traffic image filters is exceeded. | The quota for traffic mirror filter conditions has been exceeded. | |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | The quota for filter rules that can be associated with a single traffic mirror filter condition has been exceeded. | |
| 400 | QuotaExceeded.VBRBandwidth | The VBR bandwidth must not exceed the physical connection bandwidth. | The physical router bandwidth exceeds the limit (physical connection bandwidth). | |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | The device quota has been exceeded. | |
| QuotaExceeded.vbrPerpConn | Virtual boarder router per PhysicalConnection quota exceed. | The number of VBRs of each Express Connect circuit has reached the upper limit. Reduce the number of VBRs and try again. | ||
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | Quota exceeded. | |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | The quota for virtual border router bandwidth is exceeded. | The VirtualBorderRouterBandwidth quota has been exceeded. | |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | The VBR bandwidth quota has been exceeded. | |
| 400 | QuotaExceeded.Vpc | VPC quota exceeded. | The number of VPCs under the user's account has reached the quota limit. | |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | The quota for shared ports created on a single physical port has been exceeded. | |
| 400 | QuotaExceeded.VpnRouteEntry | The number of route entries to the VPN gateway in the VPC routing table has reached the quota limit. | The number of routes pointing to the VPN gateway in the VPC route table has reached the quota limit. | |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | Failed to create the route entry because the number of VPN route entries exceeds the limit. | |
| 400 | QuotaExceeded.VSwitch | Virtual switch quota exceeded. | The number of vSwitches has reached the quota limit. Reduce the number of vSwitches and try again. | |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | The VSwitchCidrReservationMask exceeds the quota. Refer to the API documentation for parameter descriptions and modify it before retrying. | |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | Operation failed due to %s quota restrictions. The reserved CIDR block mask exceeds the default mask of the current IP Prefix: %s/%s. | |
| RealNameAuthenticationError | Your account has not passed the real-name authentication yet. | Your account has not completed real-name verification. Complete real-name verification and try again. | ||
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | The router interface is referenced by a route entry. | |
| ReserveIpFail | Reserve eip failed. | The system failed to reserve the specified EIP. | ||
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | Policy-based routing quota exceeded. | |
| Resource.QuotaFull | The quota of resource is full | The resource quota is exhausted. | ||
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | The resource you are operating on has reached its quota limit. Refer to the VPN operation documentation to request a quota increase or use alternative solutions. | |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | The specified gateway route table is already bound to a gateway instance of the same type. | |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | The specified IPv4 Gateway is already bound. | |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | The physical connection is already bound to another QoS policy. | |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | Operation failed: the prefix list route already exists. | |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | The specified route table is already bound. | |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | The specified traffic mirror source and session are already bound. | |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | The specified VBR is already bound. | |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | The default vSwitch already exists. | |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | This FULLNAT rule already exists. | |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | The configured NatIp already exists. | |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | The configured NatIpCidr already exists, or there is IP address overlap. | |
| 400 | ResourceAlreadyExist.NatQosEntry | The specified natGateway qosEntry already exists | This rate-limiting rule already exists. | |
| 400 | ResourceInConfiguring | The resource is being configured. | The resource is undergoing configuration changes. | |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | The specified VBR is still in use. | |
| ResourceNotAssociated | The HaVip and ECS instance are not associated. | The HAVIP is not bound to the ECS instance. | ||
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | Operation failed: this VPC is not associated with the specified CEN. | |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | The current resource is not associated with a dedicated gateway; this operation cannot be performed. Verify and retry. | |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | The target instance for route propagation is not associated with the VPC. | |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | No binding exists between the specified traffic mirror source and session. | |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | The specified VBR is not associated with BondRI. Confirm and retry. | |
| ResourceNotAvailable | Resource you requested is not available in this region or zone. | You cannot create a vSwitch in the current region or zone. | ||
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | The specified zone in the input region is unavailable. | |
| ResourceNotAvailable.Vpc | Resource you requested is not available in this region or zone. | The resource you requested is not available in this region or zone. | ||
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | Insufficient bandwidth resources. | |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | Insufficient resources: no matching CIDR block found. | |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | Specified resource insufficient. | |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | Insufficient shared bandwidth package resources. | |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | Insufficient IPv6 address resources. | |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | Insufficient IPv6 CIDR block resources. | |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | |
| 400 | ResourceNotEnough.SwitchAvailableIps | The available private Ip number is not enough in your subnet. | Insufficient available private IPs in the subnet. | |
| 400 | ResourceNotFound | The specified resource %s is not found. | The specified resource does not exist. | |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | The specified resource does not exist. | |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | The current access point information does not exist. Verify and retry. | |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | BondRi Connection does not exist. | |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | The specified BondRI instance does not exist. | |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | Operation failed: the input CEN resource does not exist. | |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | The CIDR block you added does not exist. | |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | The specified CidrReservation does not exist. Verify whether the CidrReservation status is available. | |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | The specified VSwitchCidrReservation instance does not exist. | |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | The specified VSwitchCidrReservation does not exist. Verify whether the VSwitchCidrReservation status is available. | |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | The CIDR block does not exist. | |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | The specified ECS instance does not exist. | |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | The input contiguous EIP group instance does not exist. | |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | The specified %s resource was not found. | |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of %s is not found. | The FullNatEntry was not found. | |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | The full nat entry was not found. | |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | The NAT Gateway does not have a full nat table. | |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | The full nat table does not exist. | |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | The specified GatewayEndpoint does not exist. | |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | The GatewayLoadBalancerEndpoint instance was not found. | |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | The specified gateway route table was not found. | |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | The next-hop instance does not exist. | |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | The bound resource does not exist. | |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | The specified IP was not found. | |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | The dependent resource IPAM Pool does not exist. | |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | The specified IPv4 Gateway was not found; deletion is not possible. | |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | The input IPv4 Gateway instance does not exist. | |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | The specified Ipv6Address does not exist. Please verify your input. | |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | The specified IPv6 only-egress rule instance does not exist. | |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | The input IPv6 Gateway instance does not exist. | |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | The specified IPv6 instance ID does not exist. Please verify your input. | |
| 404 | ResourceNotFound.NatGateway | The NatGateway instance not exist. | This NAT Gateway does not exist. | |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | The specified NAT Gateway does not exist. | |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | The NatIp resource was not found. | |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | The specified %s resource was not found. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | The specified ENI does not exist. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | The next-hop ENI does not exist. | |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | The specified NetworkInterface %s does not exist. | |
| 400 | ResourceNotFound.NetworkInterfaceId | The specified resource is not found. | The resource was not found. | |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | The next-hop instance does not exist. | |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | The physical connection does not exist. | |
| 400 | ResourceNotFound.PhysicalConnectionId | PhysicalConnection is not found. | The PhysicalConnectionId was not found. | |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified PhysicalConnectionId [%s] is not found. | The PhysicalConnectionId was not found. | |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified resource of [%s] is not found. | The PhysicalConnection does not exist. | |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | The specified prefix list does not exist. | |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | The association with the prefix list does not exist. | |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | The specified EIP address pool instance does not exist. | |
| 400 | ResourceNotFound.QosTableIdOrNatGatewayId | natGatewayId and qosTableId can not both be null | Both natGatewayId and qosTableId cannot be empty. | |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | The specified route entry does not exist. | |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | The gateway route table does not exist. | |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | The specified SLB does not exist. | |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. | |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | The specified traffic mirror target instance does not exist. | |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | The specified traffic mirror filter condition does not exist. | |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | The specified traffic mirror filter rule does not exist. | |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | The specified traffic mirror session does not exist. | |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | The virtual border router does not exist. | |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | The specified VpcPeer cannot be found. | |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | The specified VSwitch instance does not exist. | |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | The specified VSwitch does not exist. Verify that the VSwitch is in the Available state. | |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | The specified VSwitch does not exist. Check whether your input is correct. | |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | The VSwitch where the ENI resides does not exist. | |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | The dependent resource vSwitchCidrReservation does not exist. | |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | The specified resource is not within the specified resource group. | |
| 400 | ResourceQueryError | The specified resource is queried error. | An error occurred while querying the specified resource. | |
| 400 | ResourceQuotaExceeded.NatQosEntry | The specified natGateway qosEntry quota exceed. | The number of protective rate-limiting entries for this NAT Gateway has reached the quota. | |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | The bound instance is in an intermediate state. | |
| 400 | ResourceType.Unknown | Unknown ResourceType. | The resource type does not exist. | |
| RISK.RISK_CONTROL_REJECTION | The account is disabled by the risk control system. | |||
| RI_CREATE_ONE_LIMIT_BY_SYNC | Create ri only one limit by sync. | You can create only one router interface at a time. | ||
| 400 | RouteConflict | Route conflict exists in routing table. | A routing conflict exists in the route table. | |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | A routing conflict exists in the route table. | |
| RouterEntryConflict.Duplicated | A route entry already exists | The route already exists. | ||
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | Deletion is not allowed because a route pointing to the router interface exists. | |
| ROUTER_INTERFACE_REFERED_BY_ROUTEENTRY | The specified VlanInterface has been used by routeEntry. | The VLAN interface is being used by a route entry. | ||
| 400 | RuleExist | The rule already exists. | The rule already exists. | |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | The security group does not exist in this VPC. | |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | The security group is managed and cannot be used. | |
| 400 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | The request failed due to a temporary server failure. | |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | The specified signature nonce has already been used. | |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | The number of resource group IDs exceeds the limit. | |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | The number of tags exceeds the limit. | |
| SNAT_IP_POOL_COUNT_TOO_MANY | The Snat pool ip too many. | The number of IP addresses has reached the upper limit supported by the SNAT IP address pool. | ||
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | The SLS source project or Logstore does not exist. | |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | The current VPN instance version does not support IDaaS 2.0. | |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | Failed to add a route pointing to the client CIDR block. Check the VPC route entries and related quotas. | |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | An SSL VPN server already exists for the specified VPN Gateway. | |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | The SSL VPN server port must be within the range [1-65535]. | |
| 500 | SystemBusy | The system is busy. Please try again later. | The system is busy. Please try again later. | |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | The number of Keys in the filter parameters cannot exceed 5. | |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | The number of Values for a single Key in the filter parameters cannot exceed 5. | |
| TaskConflict | The eip operate too frequent | EIP operations are too frequent. | ||
| 400 | TaskConflict | The operation is too frequent. Please wait a moment and try again. | The current operation is too frequent. Please try again later. | |
| 400 | TaskConflict | The operation is too frequent. Please try again later. | The operation is too frequent. Please try again later. | |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | The operation is too frequent, causing task conflicts. | |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | The operation is too frequent. Please try again later. | |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | The operation is too frequent. Please wait a moment before retrying. | |
| TaskConflict.AssociateGlobalAccelerationInstance | Operate too frequent. | The number of requests that you send exceeds the upper limit. | ||
| Throttling | Request was denied due to request throttling. | The traffic volume exceeds the quota. To increase the quota, submit a ticket. | ||
| 400 | Throttling.User | Request was denied due to user flow control. | The request was rejected due to client-side rate limiting. | |
| 400 | Unauthorized | This api does not support sub user or role. | This API does not support sub-users or roles. | |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | The specified IPv6 CIDR block is unavailable. | |
| UnknownError | The request processing has failed due to some unknown error. | An unknown error occurred. Try again later. If the error persists, submit a ticket. | ||
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | The AccessMode.ModeValue property of the VPC NAT is not supported for this operation. | |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | The specified zone is not supported for instance creation in the current region. | |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | Creating highly available VIPs is not supported in CloudBox. | |
| 400 | UnsupportedFeature.CloudBoxIpv6 | The IPv6 feature is not supported by cloud box. | Creating IPv6 resources is not supported in CloudBox. | |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | Creating ECMP routes using prefix lists is currently unsupported. | |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | DHCP options set-related features are not effective in the current region. | |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | The EIP binding to IpAddress feature is not supported. | |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | Binding EIPs to PrefixIp is not supported in the current region. | |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | Enabling NAT Gateway session logging is not supported for the current instance. | |
| 400 | UnsupportedFeature.FwNatInMutilBindedEipBindType | The FW NAT in MUTIL_BINDED eip bind type is can not be created. | Creating protective EIPs with binding type MUTIL_BINDED is not supported. | |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | Creating NAT Gateways in Geneve mode is not supported. | |
| 400 | UnsupportedFeature.IcmpReplyEnabled | The feature of IcmpReplyEnabled is not supported. | Modifying the ICMP proxy reply enablement is not supported. | |
| 400 | UnsupportedFeature.IndirectConvertForFwNat | The security protection enabled NAT gateway is not support change EIP bond type. | Modifying the EIP binding type is not supported for public NAT Gateways with protection enabled. | |
| 400 | UnsupportedFeature.IndirectConvertForVpcNat | The VPC NAT gateway is not support to change EIP bond type. | Modifying the EIP binding type is not supported for VPC NAT Gateways. | |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | The current IPv6 instance is in detached state and does not support the specified billing method. Refer to the API documentation parameter description and retry after modification. | |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | The current specified IPv6 instance is a single-line ISP instance and does not support the specified billing method. Refer to the API documentation parameter description and retry after modification. | |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | The VPC creation feature using IPAM is not supported. | |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | IPAM is not supported in this region. | |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | Failed to create the IPv4 gateway because the IPv4 gateway feature is not supported. | |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | The specified gateway route table does not currently support binding to this gateway instance. | |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | The specified IPv6 ISP feature is not supported. | |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | The input ipVersion is not supported. | |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | The ISP you specified is not yet supported. | |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | Operation failed because modifying the IPv6 route next hop is not supported in the current region. | |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | Modifying the route next hop is not supported in the current region. | |
| 400 | UnsupportedFeature.MutilBindedTypeNatEnableFw | The NAT with Mutil-Binded Eip bind type is not support enable firewall. | NAT gateways bound to EIPs in Multi-Bind mode do not support enabling firewalls. | |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | Creating NAT bandwidth packages is not supported. | |
| 400 | UnsupportedFeature.NatQosEntry | The specified natGateway can not support the qos entry feature. | This NAT instance does not support protective rate limiting. | |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | The current route entry does not support modifying the next hop information. | |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | Operation is not allowed because the route’s next hop type is being modified from Local. | |
| 400 | UnsupportedFeature.NormalNatModifyEipBindMode | The normal NAT gateway is not support to change EIP bond type. | Standard NAT gateways do not support modifying the EIP binding type. | |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | Route entries pointing to standard NAT gateways do not support modifying the next hop. | |
| 400 | UnsupportedFeature.PrivateLinkMode | The feature of %s is not supported. | Reverse access is not currently supported. | |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | The specified ReservedType is not supported. | |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | The ReservedType you specified is not supported; please re-enter according to the request parameter requirements. | |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | This router interface does not support IPv6. | |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | The route table type you specified is not supported. | |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | The route table type you specified is not supported. | |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | Custom flow log trafficPath functionality is not currently supported for this user. | |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | The VSwitch you specified resides in a VPC that does not support advanced features; please select another VSwitch and retry. | |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | This VPC does not support certain advanced features; please submit a ticket for assistance. | |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | VPC private domain name functionality is not effective in the current region. | |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | The specified IPAM address pool does not support IPv6. | |
| 400 | UnsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not supported to enable security protection. | VPC NAT gateways do not support enabling security protection. | |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | Vpconn type is not supported. | |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | The peer end of this router interface is a VPC; IPv6 routes with this next hop type cannot be created in this region. | |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | The specified VSwitch has not enabled IPv6. | |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | The VSwitch you specified has not enabled IPv6. | |
| UnsupportedParameter | A parameter is set to an invalid value. | |||
| 400 | UnsupportedRegion | The feature of prefixList entry is not supported in this region. | PrefixList routes are not supported in the local region. | |
| 400 | UnsupportedRegion | The feature is not supported in current region. | This feature is not supported in the current region. | |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | IPv4 gateways are not supported in this region. | |
| 400 | UnsupportedRegion | UnsupportedRegion | This feature is not supported in the current region. | |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | CloudBox public network is not supported in this region. | |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | PrefixList-type routes are not supported in this region. | |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | Protective NAT gateways are not supported in this zone. | |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | Bandwidth exceeded. | |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | Virtual Border Router bandwidth exceeds the physical connection threshold. | |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | The current instance state does not support this operation. | |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | The current VCO status does not support modification or deletion operations. | |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | The VLAN ID is already in use. | |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | The shared physical connection you entered is not associated with a Virtual Border Router. | |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | Fault simulation is not supported for shared physical connections with VLAN 0. | |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | Route conflicts exist in the route table. | |
| VpcStatusError | The Vpc is creating . | The VPC is being created. | ||
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | VPC subnet does not exist. | |
| 400 | VpnConnection.Configuring | The specified service is configuring. | The service is being configured; please try again later. | |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | The specified service is locked due to overdue payment. | |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | Primary and secondary tunnels must be created simultaneously. | |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | Different VPN connections under the same VPN cannot configure different IKE settings when using the same customer gateway. | |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | Multiple IPsec connections are detected sharing the same VPN gateway and customer gateway; pre-shared keys and IKE phase configuration parameters must be identical across these IPsec connections. | |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | Multiple IPsec connections are detected sharing the same VPN gateway and customer gateway; their interesting traffic CIDR blocks must not overlap. | |
| VpnGateway.Configuring | The specified service is configuring. | The service is being configured. Try again later. | ||
| 500 | VpnGateway.Configuring | The specified VPN gateway is being configured. | The VPN gateway is being configured. | |
| VpnGateway.FinancialLocked | The specified service is financial locked. | The service is suspended due to overdue payments. Top up your account first. | ||
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | A single VPN gateway does not support configuring both IPSec server and IPSec connections simultaneously. | |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | The VPN gateway has not enabled the IPsec VPN feature. | |
| 400 | VpnGateway.SslVpnDisabled | The VPN gateway has not enabled SSL VPN. | The VPN gateway has not enabled the SSL VPN feature. | |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | This VPN is being configured; please wait and retry the operation later. | |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting pbr route entry priority. | Policy-based routing priority is not supported in the current version of the VPN gateway. | |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | Setting policy-based routing entry priorities is not supported in the current VPN version. | |
| 400 | VpnRouteEntry.AlreadyExists | The specified route entry is already exist. | The specified route already exists. | |
| 400 | VpnRouteEntry.BackupRoute | Validate backup route entry failed. | Primary/secondary route entry validation failed. | |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | The specified route entry is being configured. | |
| 400 | VpnRouteEntry.Conflict | The specified route entry has conflict. | Route entry conflict exists. | |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | The specified client IP pool conflicts with an existing VPN connection or SSL server. | |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | The route entry conflicts with an SSL client. | |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | Invalid route weight value. | |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | The VPN gateway does not support multiple policy routes with identical source and destination CIDR blocks at the same priority level. | |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | Dual-tunnel VPN gateways do not support policy routes where the source and destination CIDR blocks are identical. | |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | The VPN gateway does not support policy routes with identical source CIDR, destination CIDR, and weight. | |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | A conflict occurred during the VPN operation; please retry later. | |
| VpnUnderStock | There are not enough vpn gateways in stock | The VPN gateway inventory is insufficient. | ||
| 404 | VRouterId.NotFound | The VRouter not found. | The specified VRouter instance was not found. | |
| VswitchStatusError | The VSwitch is creating . | The operation is not supported when the vSwitch is being created. | ||
| ZONE_NO_AVAILABLE_IP | The Zone have no available ip. | No IP address is available in the zone. | ||
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | The IPv6 IP bound to the cloud service instance cannot enable public bandwidth. | |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | The traffic mirroring service has already been enabled; do not repeat the operation. | |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Insufficient Ipv4Prefix resources. | |
| 400 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The Ipv4Prefix resource does not exist. | |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | The Ipv4Prefix does not match the reserved CIDR block of the vSwitch. | |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | The NatIp parameter is invalid. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | The Ipv4Prefix parameter is invalid. | |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | The Ipv4Prefix has already been allocated. | |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | The NatIp resource has already been allocated. | |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | The DhcpOptionsSetId parameter is missing. | |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | The current region does not support the route target group feature. | |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | The specified resource %s does not exist. | |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | The MinRxInterval parameter is missing. When configuring BFD packets, MinTxInterval, MinRxInterval, and DetectMultiplier must all be specified. | |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | The MinTxInterval parameter is missing. When configuring BFD packets, MinTxInterval, MinRxInterval, and DetectMultiplier must all be specified. | |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | The DetectMultiplier parameter is missing. When configuring BFD packets, MinTxInterval, MinRxInterval, and DetectMultiplier must all be specified. | |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | Insufficient resources requested; submit a ticket if further allocation is required. | |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The Ipv4Prefix resource does not exist. | |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid; it must be a /28 CIDR block. | |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | The NatIp belongs to an Ipv4Prefix and cannot be deleted independently; delete the Ipv4Prefix directly. | |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid; it must be a /28 CIDR block. | |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The SnatEntry associated with NatIp or Ipv4Prefix cannot be deleted. Delete the dependent Snat and delete it again. | |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | The Ipv4Prefix resource was not found; verify its existence. | |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | This Ipv4Prefix has already been created; do not recreate it. | |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | Instances configured in a route target group must not reside in the same zone. | |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | All instances configured in a route target group must be of the same instance type. | |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | The VPC of the route target group differs from the VPC of the configured instances. | |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | Updating enabled members in a route target group is prohibited. | |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | The current status of the route target group does not permit this operation. | |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | Updating the instance type of members in a route target group is prohibited. | |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | Resources associated with the VPC (e.g., CEN) are undergoing configuration changes; retry later. | |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | Managed ENIs are not allowed as traffic mirroring sources. | |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | The VPC route table entry does not exist. | |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | Deletion is not allowed when a VBR exists on the physical port. | |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | Deletion failed; users with shared or dedicated ports must perform the deletion. | |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | This operation is not allowed because the current physical port does not support advanced capabilities such as MPBGP and MPBGP-v6. | |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | Increasing the maximum entries in the prefix list would exceed the quota for associated Network ACL instances. | |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | The IP version of the prefix list specified in the input parameter does not match its actual IP version. | |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | The gateway does not support Ipv4Prefix. | |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | Ipv4Prefix quota exceeded. | |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | NatIp and Ipv4Prefix quotas exceeded. | |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | The RelationKey parameter is missing. | |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | The specified zone is being decommissioned; creating vSwitches in decommissioning zones is prohibited. | |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | Instances in a route target group must not reside in the same zone. | |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | Updating the instance type of members in a route target group is prohibited. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | Updating enabled members in a route target group is prohibited. | |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | The Network ACL is currently binding to or unbinding from a vSwitch. | |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | The specified zone has been disabled; creating vSwitches is not allowed. | |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | Updating enabled members in a route target group is prohibited. | |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | Failover is prohibited when disabled members are in an unhealthy health check state. | |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | The specified RegionId does not exist. Verify the parameter value. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId is not found. | The specified RegionId does not exist; verify whether this service is available in the region. | |
| 400 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | ClassicLink has already been enabled for this VPC. | |
| 400 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | VPC deletion failed because cloud service instances associated with this VPC have not been deleted. | |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist. | The specified region does not exist. Verify the parameter value. | |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | The current route table status does not support deletion. | |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | RI cannot be attached to CEN. | |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | Parameter error. | |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The specified vSwitch has active VSwitchCidrReservation; deletion is not allowed. | |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | The current region is not supported. | |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | Detaching the system route table is not allowed. | |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | Operation conflicts with an existing route; operation failed. | |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | Managed instances do not support this operation. | |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | The maximum number of route target groups allowed per VPC has been exceeded; request a quota increase. | |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | Dual-stack flow log instances do not support custom trafficPath functionality. | |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | The specified EIP allocation token has expired. | |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | The VLAN ID of the specified VBR is 0, which does not support fault simulation; use a physical connection for fault simulation. | |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | The specified input parameters AccessIp and AccessDomain conflict. | |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | The AccessDomain parameter in the request is invalid. | |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | The error message returned because the IPsec VPN server on specified vpn gateway is not deleted. | |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | The current VPN instance does not support policy-based routing. | |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | Creating high-bandwidth VpnAttachment is not supported. | |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | The TunnelBandwidth parameter is invalid. | |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | DES/3DES algorithms in IKE and IPsec encryption do not support multi-algorithm compatibility. | |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | The specified customer gateway has conflict with vpn gateway ip. | |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | IKEv1 does not support configuring only the GCM-16 algorithm for IKE encryption. | |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | The physical connection status does not support this operation. | |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | The current physical connection does not support MACSec. | |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | The current physical connection supports MACSec but does not support the selected encryption algorithm. | |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | Operation is not allowed because a MACSec key is in a non-stable state. | |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | A single physical connection supports up to three MACSec key sets. | |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | The specified Ckn does not exist. | |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | The current physical connection supports MACSec, but the selected encryption algorithm is not supported. | |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | The current operation is denied because a MACSec key is bound to the physical connection. | |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | The current resource is still relied upon by the routing entry. | |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | The status of the traffic mirror session destination is invalid. | |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | The status of the traffic mirror session source is invalid. | |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | Operation failed because the EIP is not bound to this NAT Gateway. | |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | Operation failed because the SNAT rule IP address pool is added to multiple bandwidth packages. | |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | The SNAT rule is in an intermediate state or its status is abnormal. Please retry later. | |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | The NatIp is in an intermediate state. Please retry later. | |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | Operation failed because the EIP is not bound to this NAT Gateway. | |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | Operation failed because IPs in the SNAT rule IP address pool are added to multiple NAT bandwidth packages. | |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | The current region does not support this feature temporarily. | |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | Failed to create the NAT Gateway. | |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | The route table status does not support this operation currently. Please retry later. | |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | The current zone does not support configuring FullNat rule domain names. | |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | The current instance does not support configuring FullNat rule domain names. | |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | Order error: basic parameter information is incomplete. | |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | Order error: the billing method parameter is invalid. | |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | Operation failed due to unsupported pay-as-you-go region. | |
| 400 | OperationUnsupported.User | The current user does not support this operation. | The current user is not authorized to perform this operation. | |
| 400 | Instance.NotFound | instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | Operation failed because some IP addresses in the SNAT rule IP address pool are not added to a shared bandwidth package. | |
| 400 | NatInstance.NotFound | Instance not found. | The instance does not exist or does not belong to the current user. | |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | This operation does not support the RegionId parameter. | |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | Querying monthly traffic data is not supported under the 95th percentile billing mode. | |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | Authorization policy format is invalid. | |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | The resource being operated is locked by the system and cannot be modified temporarily. | |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | Parameter conflict: specifying an IPv4 CIDR block does not support creating an IPv6-only VSwitch. | |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | The current user is not allowed to create a single-AZ NAT Gateway. | |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | The VPC is associated with the dedicated line gateway %s and cannot be deleted. | |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | Port advanced capabilities are not supported temporarily. Please confirm and retry. | |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | The VPC IPv4 gateway corresponding to the IP address bound to the EIP is not associated with any gateway route table. | |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | The RouterId associated with the router interface cannot be empty. Please check and retry. | |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | The router interface status is abnormal. | |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | Invalid router type. | |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | VPN connections exist on the specified VPN Gateway and must be deleted first. | |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | The mask of parameter Cidr or parameter CidrMask is smaller than the minimum network mask length defined in the address pool compliance rules. | |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | The mask of parameter Cidr or parameter CidrMask exceeds the maximum network mask length defined in the address pool compliance rules. | |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | The NAT Gateway is referenced by a route target group; enabling ICMP proxy reply is prohibited. | |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | The current NAT Gateway is referenced by a route target group. Please delete the reference first. | |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | The next hop of the IPv6 route does not have an IPv6 address. | |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | Route target groups only support single-AZ NAT Gateways. | |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | NAT Gateways in a route target group must enable ICMP proxy reply to ensure ICMP probe packets are properly responded to. | |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | This region does not support using NAT Gateways as members of route target groups. | |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | The selected NAT Gateway resource was not found when creating or modifying the route target group. | |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | VSwitch information associated with the selected NAT Gateway was not found. | |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | This operation does not support route target groups whose members are NAT Gateways. | |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | The IP does not exist. | |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | Parameter EcrInstanceId is missing. | |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | Parameter OwnerId is invalid. Please verify the parameter and retry. | |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | Deep pagination skip count has triggered rate limiting. Please reduce the frequency of deep pagination skips or use sequential pagination. | |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber cannot be used simultaneously with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | At least one of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber is supported only for Prefix reservation type. | |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | The secondary zone VSwitch’s zone does not support dual-tunnel VPN creation. Please change the VSwitch. | |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | Parameter DisasterRecoveryVSwitchId is missing. | |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | The specified VSwitch does not exist in this region. | |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | When BGP is enabled for the IPSec connection, the customer gateway must be configured with an ASN. | |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | The specified policy-based route does not exist. | |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | Operation denied: the expanded destination CIDR block overlaps with the existing VPC CIDR block %s. | |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | Operation denied: the destination CIDR block does not overlap with the original CIDR block; CIDR adjustment requires overlap. | |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | Missing required parameter: at least one of CidrBlock or SecondaryCidrBlock must be specified. | |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | Operation denied: the shrunk destination CIDR block does not cover the existing VSwitch CIDR block %s. | |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | Operation denied: the destination CIDR block is identical to the original CIDR block; no modification is needed. | |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | When modifying an additional CIDR block, the NewSecondaryCidrBlock parameter must be specified. | |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | Operation denied: the specified additional CIDR block does not exist in the current VPC. | |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | Parameters CidrBlock and SecondaryCidrBlock are mutually exclusive and cannot be specified simultaneously. | |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | Failed to create the physical connection: no access device meets the equipment advanced capability requirements. | |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | Failed to create the physical connection: no access device matches the specified optical module. | |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | Failed to create the physical connection: no qualified access device remains after redundant physical connections are excluded. |
该文章对您有帮助吗？