错误码
|
HTTP status code |
错误码 |
错误信息 |
描述 |
操作 |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | 指定的实例不存在。 | 诊断 |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | 指定的计费周期无效。 | 诊断 |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | 指定的计费类型不可用。 | 诊断 |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | 无法修改路由表属性，表名格式无效 | 诊断 |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | 调用内部服务失败，请稍后重试。 | 诊断 |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | 传入的Name无效 | 诊断 |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | 接入设备不允许直接使能物理端口 | 诊断 |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | 输入的接入点不存在或者没有权限查看。 | 诊断 |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | 用户购买VPN的账户余额不足。 | 诊断 |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | 账号可用金额不足 | 诊断 |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | 账号余额不足 | 诊断 |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | AliUid不允许直接使能物理端口 | 诊断 |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | 为共享带宽包分配公网IP失败。 | 诊断 | |
| 400 | AnotherJobTesting | There is another job which is testing. | 同一个用户在同一个地域只能同时进行一个故障演练任务。 | 诊断 |
| ARREARAGE | 指定的账号已欠费。 | 诊断 | ||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | Eip实例与共享带宽的IpVersion不匹配。 | 诊断 |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | DHCP选项集实例ID和VPC不匹配，请检查DHCP和VPC的对应关系是否正确。 | 诊断 |
| AUTH.RAM_AUTH_FAILED | RAM账号身份验证失败。 | 诊断 | ||
| 400 | AvailableZoneNotExist | Available zone not exist. | 可用区不存在。 | 诊断 |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | 该带宽包被欠费锁定。 | 诊断 | |
| BandwidthPackage.QuotaExceeded | 带宽包数量已超过限制。 | 诊断 | ||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | 混合云模式的eip不能添加到低带宽的带宽包中。 | 诊断 |
| BandwidthPackageId.InvalidBizStatus | 指定的共享带宽包处于欠费锁定状态。 | 诊断 | ||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | 指定的带宽包已经被金融锁定，不能添加ip。 | 诊断 |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | 共享带宽包操作冲突。 | 诊断 | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | 指定的绑定实例已经具有带宽。 | 诊断 |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | ECS 实例已经存在端口转发规则(DNAT)，请删除相应的端口转发规则再进行操作。 | 诊断 |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | 不能操作这个EIP。 | 诊断 | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | 标签和资源组不能同时为空 | 诊断 |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | 参数GatewayRouteTableId和Ipv4GatewayRouteTableId不能同时为空，建议您使用GatewayRouteTableId。 | 诊断 |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | Ipv6InstanceId和Ipv6InternetBandwidthId不能同时为空 | 诊断 |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | 入参Ipv6AddressId和Ipv6InternetBandwidthId不能同时为空 | 诊断 |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | 账户没有设置支付方式或预留金额不足. | 诊断 |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | 客户端 IP 池的网络掩码长度必须大于等于 16 且小于等于 29。 | 诊断 |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | 当前客户端网段不可用。 | 诊断 |
| COMMODITY.INVALID_COMPONENT | 指定的实例组件无效，请您检查该实例组件是否正确。 | 诊断 | ||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | 销售模块参数不满足约束检查 | 诊断 |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | 指定的 VSwitchCidrReservationMask 和 VSwitchCidrReservationCidr 冲突，请根据API文档参数说明修改后重试。 | 诊断 |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | 超过指定VPC的HAVIP配额。 | 诊断 | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | 超过实例的HaVip配额。 | 诊断 |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | 指向该HaVip实例的路由条目数量已达上限。 | 诊断 |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | 同路由表中指向HaVip的路由数超过限制。 | 诊断 |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | 一个后端服务实例绑定的全球加速实例数量达到上限 | 诊断 | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | 超过HaVip的实例配额。 | 诊断 |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | 创建目的路由数量超过配额限制。 | 诊断 |
| CreateOrderFailed | 订单创建失败。 | 诊断 | ||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | 策略路由数量超过配额限制。 | 诊断 |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | 创建超过配额限制的SSL证书数量。 | 诊断 |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | VPN连接数量超过配额限制。 | 诊断 |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | 创建VPN用户网关数量超出配额。 | 诊断 |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 当前CBN的状态不支持创建虚拟交换机（VSwitch）操作 | 诊断 |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | 额度不足,请联系您的渠道合作伙伴提升额度。 | 诊断 |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | 当前vpn连接实例被跨账号授权到其他账号的CEN，删除时需要先解除跨账号授权。 | 诊断 |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | 跨BID连接非法。 | 诊断 | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | 禁止为其他站点的用户创建VBR。 | 诊断 |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | 当前用户网关和路由存在冲突。 | 诊断 |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | IPSec连接关联的用户网关与VPN网关不应该有相同的网关IP地址。 | 诊断 |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 当前CBN状态不支持删除虚拟交换机（VSwitch）操作 | 诊断 |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | 资源删除保护已启用 | 诊断 |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | 资源删除保护不存在 | 诊断 |
| 400 | DeletionProtection.OwnerError | The resource owner error. | 您不是该资源的所有者，无法操作 | 诊断 |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | 不支持预付费资源 | 诊断 |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | 资源不存在 | 诊断 |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | 不支持该类型资源 | 诊断 |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | 该交换机下还有资源未释放，无法删除。 | 诊断 |
| DependencyViolation | Some route entry status blocked this operation. | 无法执行该操作，当前路由表中有路由条目的状态为pending或modifying。 | 诊断 | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的资源[%s]依赖了[%s]，请先删除依赖资源后再操作。 | 诊断 |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | 该VPC存在反向访问授权关系，无法删除 | 诊断 |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的资源存在依赖关系依赖，请先解除关联。 | 诊断 |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT网关上有尚未删除的带宽包，请删除NAT网关下的所有带宽包后再重新操作。 | 诊断 | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | vbr已经依赖BgpGroup,不能删除 | 诊断 |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | VBR存在BGP宣告网段配置，不能删除VBR。 | 诊断 |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | 存在依赖的BGP对端 | 诊断 |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | 当前交换机正被云服务使用无法删除，请确认云服务使用场景。 | 诊断 |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | 该VPC存在云服务资源，无法删除。 | 诊断 |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | 依赖冲突，存在自定义路由表。 | 诊断 |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | 当前VPC还存在未删除的DHCP选项集实例，不允许删除 | 诊断 |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| DependencyViolation.EIPS | 指定的NAT网关已绑定了弹性公网IP。 | 诊断 | ||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | 指定的NAT网关已绑定了弹性公网IP，请先将其从NAT网关解绑。 | 诊断 |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | 当natgw存在时，无法删除VSwitch。 | 诊断 |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | IP 地址被端口转发规则引用，请先删除相应规则再进行操作。 | 诊断 | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | 该共享带宽包有未删除的SNAT或DNAT表项，请您先删除SNAT或DNAT表项再进行操作。 | 诊断 |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | 存在Fullnat配置条目依赖此nat ip，因此本操作不能完成。 | 诊断 |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | VPC中还有终端节点，不能被删除，请先删除该VPC中的终端节点再删除VPC。 | 诊断 |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | 指定的 vpn 网关上有 Gre 隧道未删除。 | 诊断 |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | 无法删除交换机，该交换机下有关联的HaVip。 | 诊断 |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | 无法删除HAVIP，该HAVIP绑定了EIP。 | 诊断 | |
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | 作为路由条目下一跳 HaVip 不能被删除，请先删除指向该 HaVip 的路由条目后再进行删除。 | 诊断 | |
| DependencyViolation.Instance | Specified object has dependent resources | 该对象有关联的资源。 | 诊断 | |
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | 当前VPC还存在未删除的云产品实例，VPC删除失败。 | 诊断 |
| DependencyViolation.ip | 指定的NAT网关已绑定了一个弹性公网IP。 | 诊断 | ||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | 该资源已分配IpPrefix，请删除IpPrefix后重试 | 诊断 |
| DependencyViolation.Ips | 指定的共享带宽包已绑定 | 诊断 | ||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | 该资源无法被删除，因为该资源下有ipsec 服务端依赖。 | 诊断 |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | 该VPC下存在IPV4网关，无法删除。 | 诊断 |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的资源[%s]依赖了IPv6预留网段，请先删除依赖资源后再操作。 | 诊断 |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | 该VPC存在IPv6网关，无法删除。 | 诊断 |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | 指定的IPv6实例已开通IPv6带宽，请释放IPv6带宽后在操作。 | 诊断 |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | VSwitch加入了组播域，无法删除。 | 诊断 |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | VPC中还有NAT网关，不能被删除，请先删除该VPC中的NAT网关再删除VPC。 | 诊断 |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | 有依赖的NAT IP，所以此操作不能进行 | 诊断 |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT有依赖的NAT IP CIDR，所以此操作不能进行 | 诊断 |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | 指定的对象具有从属资源网络acl。 | 诊断 |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | 当存在网络acl时，无法删除VSwitch。 | 诊断 |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | nqa存在，无法删除vbr | 诊断 |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | 该VPC存在对端RouterInterface未删除，删除VPC失败。 | 诊断 |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | 由于PrefixList还存在引用关系，所以无法删除PrefixList | 诊断 |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | 存在依赖资源。 | 诊断 |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | %s 资源依赖于 %s，因此本操作不能完成。 | 诊断 |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | 有依赖的保护性限速规则 | 诊断 |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | 当前VPC还存在未删除的自定义路由规则，VPC删除失败。 | 诊断 |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | 指定的虚拟交换机连接了路由器接口，无法删除。 | 诊断 | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT有依赖的路由条目，所以此操作不能进行 | 诊断 |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | 该对象有关联的路由器接口。 | 诊断 | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | 路由器接口被某个路由条目引用（将当做下一跳目标）时，不能删除，请先删除指向该路由器接口的路由条目后再进行删除。 | 诊断 |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | VBR已经被引用 | 诊断 |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | VSwitch绑定了路由表，不允许删除。 | 诊断 |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | 当前VPC还存在未删除的安全组，VPC删除失败，请先删除该VPC下的安全组后再删除VPC。 | 诊断 |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | 当前VPC还存在未删除的安全组，VPC删除失败，请先删除该VPC下的安全组后再删除VPC。 | 诊断 |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | 当前VPC还存在未删除的安全组[%s]，VPC删除失败，请先删除该VPC下的安全组后再删除VPC。 | 诊断 |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | 此IPv6网关[%s]下的地址[%s]开通了公网带宽，来自于共享用户[%s]，请删除后重试。 | 诊断 |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | 由于PrefixList存在共享关系，所以无法删除PrefixList | 诊断 |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | 当snat使用时，无法删除vswitch。 | 诊断 |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | IP 地址被 SNAT 规则引用，请先删除相应规则再进行操作。 | 诊断 | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | 该共享带宽包有未删除的SNAT或DNAT表项，请您先删除SNAT或DNAT表项再进行操作。 | 诊断 |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | 指定的 vpn 网关上有 SSL VPN 服务端未删除。 | 诊断 |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | 存在流量镜像会话仍依赖于当前资源。 | 诊断 |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | 您指定的资源被其他的资源依赖，不允许进行当前操作。 | 诊断 |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | 该对象有关联的隧道。 | 诊断 | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | DHCP选项集已绑定VPC，不允许删除。 | 诊断 |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT有依赖的终端节点服务，所以此操作不能进行 | 诊断 |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | 该用户网关有 VPN 链接未删除，删除关联的 VPN 链接后再删除客户网关。 | 诊断 | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | 指定的用户网关上有 vpn 连接未删除。 | 诊断 |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | 当前VPC还存在未删除的交换机，VPC删除失败，删除VPC下的交换机后再尝试删除VPC。 | 诊断 |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | 该VSwitch存在VSwitchCidrReservation使用中，不允许删除 | 诊断 |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | 目标IP端口被映射数超过配额。 | 诊断 |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | DryRun校验通过。 | 诊断 |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | 指定的ClientToken存在重复。 | 诊断 |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | 指定的Ip地址存在重复Ip，请按API文档参数说明修改后再重试 | 诊断 |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | 指定的SecondaryCidrBlock存在重复。 | 诊断 |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | 指定的参数TagKey重复。 | 诊断 |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | 下一个重复的路由条目。 | 诊断 |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | 参数重复。 | 诊断 |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | 传入了重复的cidrBlock | 诊断 |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | 给地址池添加地址段失败，因为地址段和地址掩码不能同时输入。 | 诊断 |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | DNAT公网端口%s已被重复占用。 | 诊断 |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | InternalPort参数重复或已被占用 | 诊断 |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | 本端Ip重复。 | 诊断 |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | 互联IP重复，请更换后重试。 | 诊断 |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | 参数重复。 | 诊断 |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | 本端IP地址参数有重复，请更换本端IP后重试。 | 诊断 |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | 本端IP地址参数有重复，请更换本端IP后重试。 | 诊断 |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | 本端ip地址重复。 | 诊断 |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | 互联ip地址重复，请更换后重试。 | 诊断 |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | BGP邻居IP地址重复。 | 诊断 |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | 对端IP地址重复。 | 诊断 |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | 参数值存在重复 | 诊断 |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | 对端IP地址参数有重复，请更换对端IP后重试。 | 诊断 |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | 对端ip地址重复。 | 诊断 |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | 指定的优先级参数与已有的优先级重复。 | 诊断 |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | 流量镜像源实例ID参数中包含重复值。 | 诊断 |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | 传入的trafficPath参数中存在重复的数值。 | 诊断 |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | 绑定了Qos策略的共享物理专线不允许创建跨账号虚拟边界路由器，请联系商务经理。 | 诊断 |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | 绑定了Qos策略的独享物理专线不允许创建共享物理专线，请联系商务经理。 | 诊断 |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | 物理专线所在的设备不支持Qos特性。 | 诊断 |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | 当前的故障演练任务正在操作中，请稍后重试。 | 诊断 |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | 故障演练任务最多可以添加16个资源。 | 诊断 |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | 当前用户已经存在一个正在进行的故障演练任务，请完成后再重试。 | 诊断 |
| 400 | EcFailToGetAp | Fail to get access point details. | 无法查询到对应接入点信息 | 诊断 |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | 此高速通道授权关系不存在。 | 诊断 |
| 400 | EcNotEnoughResource | Insufficient access point resources. | 接入点资源不足 | 诊断 |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | 高可靠物理专线在本地域暂时不支持售卖 | 诊断 |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | 单VBR多Pconn场景，必须将所有的Pconn都绑定QoS策略。 | 诊断 |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | 包含跨账号虚拟边界路由器的独享物理专线不允许绑定Qos策略。 | 诊断 |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | 包含共享物理专线的独享物理专线不允许绑定Qos策略。 | 诊断 |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | 当前Qos配置与其他配置冲突，请稍后再试。 | 诊断 |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | 不允许一条QoS规则内同时存在IPv4地址配置和IPv6地址配置 ，与此同时若原有的配置网络类型为IPv4不允许修改为IPv6（反之亦然），请您检查后修改。 | 诊断 |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | 您当前的Qos策略已关联了物理专线，无法直接删除，请先解除关联后再次重试。 | 诊断 |
| EipOperation.TooFrequently | 向共享带宽包中添加EIP的操作过于频繁，请稍后重试。 | 诊断 | ||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | 该eip加入带宽包过于频繁，请稍后重试。 | 诊断 |
| EIP_BIND_NATGATEWAY | 指定的EIP已绑定了NAT网关。 | 诊断 | ||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | 该实例已有公网IP。 | 诊断 | |
| EIP_NOT_SUPPORT_SNAT_POOL | 指定的EIP不可加入SNAT池中。 | 诊断 | ||
| EIP_UNDERSTOCK | There are not enough eip in stock | 库存的EIP数量不足。 | 诊断 | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | 不同ipsec隧道BGP中存在相同的隧道cidr. 隧道cidr是%s. | 诊断 |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | vpc路由表中存在路由的前缀%s被包含在ipsec server 客户端 cidr 中。 | 诊断 |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | 存在相同前缀的策略路由，前缀为%s。 | 诊断 |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | 当前region不支持开启高可用。 | 诊断 |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | 存在相同前缀的路由，前缀为%s。 | 诊断 |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | 存在相同前缀的路由，前缀为%s。 | 诊断 |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | vpc路由表中存在路由的前缀%s被包含在ssl vpn 客户端 cidr 中。 | 诊断 |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | 当前vpn网关类型不支持开启高可用。 | 诊断 |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | 开启高可用，只支持Ipsec Vpn 或者 Ssl Vpn。 | 诊断 |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | 当ENI绑定直通EIP时，需要ENI与ECS解绑 | 诊断 |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | 关联的边界路由器达到配额上限。 | 诊断 | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | 参数 %s 和 %s 相互排斥。 | 诊断 |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | 指定的入参AccessMode.ModeValue和AccessMode.TunnelType存在冲突 | 诊断 |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | 参数EnableIpv6和CidrBlock互斥。 | 诊断 |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | 下一跳类型和下一跳实例不匹配。 | 诊断 |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | 指定的入参PrivateLinkEnabled和AccessMode存在冲突 | 诊断 |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | 指定的入参PrivateLinkMode和AccessMode存在冲突 | 诊断 |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | 指定的入参Zone和IpAddress或InstanceId存在冲突 | 诊断 |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | 不允许同时传入参数Zone和PublicIpAddressPoolId | 诊断 |
| Forbbiden | The eip instance owener error | EIP 不属于当前调用者，请您检查该 EIP 是否可被您调用。 | 诊断 | |
| Forbbiden | The Router instance owener error | 该路由器不属于您的账号。 | 诊断 | |
| Forbbiden | Active custom route in vpc. | 您需要在VPC中添加自定义路由条目。 | 诊断 | |
| Forbbiden | Specified RouteEntry cannot allowed delete by openApi. | 不允许使用API删除该路由条目。 | 诊断 | |
| 400 | Forbbiden | The router does not belong to your account. | 该路由器不属于您的账号。 | 诊断 |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | 用户没有权限操作指定的资源。 | 诊断 |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | 该路由器不属于您的账号。 | 诊断 |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | 路由器所有者信息错误 | 诊断 |
| Forbbiden.ModifyIdAndType | Opposite is VBR | 对端是边界路由器。 | 诊断 | |
| Forbbiden.SubUser | The specified action is not available for you. | 您没有权限进行此操作。 | 诊断 | |
| Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | 您没有权限操作该资源，请您申请操作权限后再试。 | 诊断 | |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | 用户无权限操作此资源。 | 诊断 |
| Forbedden.NotSupportRAM | This action does not support accessed by RAM mode. | RAM用户不支持此操作。 | 诊断 | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | 您没有权限操作指定资源，请申请权限后再操作。 | 诊断 |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | 您没有当前资源管理权限，请申请权限后重试。 | 诊断 |
| 400 | Forbidden | The eip instance owener error | EIP 不属于当前调用者，请您检查该 EIP 是否可被您调用。 | 诊断 |
| 400 | Forbidden | The eip instance owner error | EIP 不属于当前调用者，请您检查该 EIP 是否可被您调用。 | 诊断 |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | 不支持预付费的费用类型。 | 诊断 |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | 申请连续EIP失败，该服务已下线，请使用IP地址池服务。 | 诊断 |
| Forbidden.Already.Bounded | The specified instance already bounded | 实例已经被绑定，请不要重复绑定。 | 诊断 | |
| Forbidden.AssociateToVBR | The physical connection still associate to VBR. | 该物理专线已经关联了边界路由器。 | 诊断 | |
| Forbidden.BillsOutstanding | You cannot create more RouterInterface because you have bills outstanding. | 无法创建路由器接口，您有未结算的账单。 | 诊断 | |
| Forbidden.BillsOutstanding | You cannot use this action because you have bills outstanding. | 无法执行该操作，您有未结算的账单。 | 诊断 | |
| Forbidden.ChargeTypeIsPrepaid | It's forbidden to release a prepaid EIP | 预付费的 EIP 实例不能释放。 | 诊断 | |
| Forbidden.ChargeTypeIsPrepaid | It’s forbidden to change prepaid EIP’s bandwidth by API. It can be changed on Aliyun web console. | 不允许使用API变更预付费EIP实例的带宽。您可以通过控制台进行变配。 | 诊断 | |
| Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | 检查路由条目配额时发生了错误。 | 诊断 | |
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to modify. | 不允许修改CircuitCode参数。 | 诊断 | |
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to specify the CircuitCode parameter. | 不允许指定CircuitCode参数。 | 诊断 | |
| 400 | Forbidden.Convert | User does not have permission to operate. | 该用户没有权限操作。 | 诊断 |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | 您暂时无法创建 PublicIpAddressPool，请检查账号是否已授权该操作 | 诊断 |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | 用户无权创建跨境routerInterface | 诊断 |
| Forbidden.DescriptionNotAllowedByCaller | The caller is not allowed to specify the Description parameter. | 不允许指定Description参数。 | 诊断 | |
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | 该私网IP不在VPC的网段范围内，请您填写在VPC的网段范围内的私网IP。 | 诊断 | |
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Destination Ip is Out of VPC CIDR. | 该私网IP不在VPC的网段范围内，请您填写在VPC的网段范围内的私网IP。 | 诊断 | |
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | 关闭该路由表的路由传播不被允许。 | 诊断 |
| Forbidden.DiskNotFound | The specified Disk is not found | 该磁盘不存在。 | 诊断 | |
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | 连续EIP组中的EIP加入共享带宽，不允许删除连续EIP组。 | 诊断 |
| Forbidden.EnableClassicLink | 仅网段为 172.16.0.0/12、192.168.0.0/16、10.0.0.0/8 的 VPC 能够开启 ClassicLink，更多信息请参考 ClassicLink 功能介绍和使用限制。 | 诊断 | ||
| Forbidden.ExternalIp.UsedInSnatTable | The specified ExternalIp is already used in SnatTable | 该公网IP已经被SNAT使用，请更换其他公网IP或将当前公网IP的SNAT规则删除。 | 诊断 | |
| 400 | Forbidden.FinancialLocked | The instance is locked due to outstanding payments. | 该实例已欠费锁定，无法操作 | 诊断 |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | 该实例已欠费锁定，无法操作 | 诊断 |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | 路由器接口由于欠费被锁定，无法操作。 | 诊断 |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | 由于未清账单，此路由器接口已被锁定。 | 诊断 |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | 当路由接口欠费时，无法进行此操作。 | 诊断 |
| Forbidden.FinancileLocked | This RouterInterface is financiel locked because of bills outstanding. | 该路由器接口已欠费锁定，因为您有未结算的账单。 | 诊断 | |
| Forbidden.GlobalAccelerationInstanceChargeTypeIsPrepaid | 预付费的全球加速实例无法释放。 | 诊断 | ||
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | 操作HaVip没有权限，请到配额中心申请权限。 | 诊断 |
| Forbidden.ImageNotFound | The specified Image is not found | 该镜像不存在。 | 诊断 | |
| Forbidden.InstanceNotFound | The specified Instance is not found | 该实例不存在，请您检查填写的实例是否正确。 | 诊断 | |
| Forbidden.InternalIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | 该私网IP不在VPC的网段范围内。 | 诊断 | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | 此IP已经被DNAT使用，不能用于SNAT。 | 诊断 |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | SNAT条目不能使用此EIP. 因为已经在DNAT条目(任意端口映射)中被使用. | 诊断 |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | 此源IP不能被使用，因为已经用于SNAT | 诊断 |
| Forbidden.IpUsedInForwardTable | The specified SnatIp already used in forward table | 该公网IP已经被DNAT使用，请更换其他公网IP地址或将当前公网IP的DNAT规则删除。 | 诊断 | |
| Forbidden.LocalGatewayIpNotAllowedByCaller | The caller is not allowed to specify the LocalGatewayIp parameter. | 不允许指定LocalGatewayIp参数。 | 诊断 | |
| 403 | Forbidden.ModifyEipBondType | Authentication is failed for modify EIP bond type. | 不允许修改EIP绑定类型。 | 诊断 |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | 没有权限绑定多直通eip。 | 诊断 |
| Forbidden.MultiVlanRi | Multiple vlan router interfaces are found. | 存在多个VLAN路由器接口。 | 诊断 | |
| Forbidden.NameNotAllowedByCaller | The caller is not allowed to specify the Name parameter. | 不允许指定Name参数。 | 诊断 | |
| 400 | Forbidden.NatPayBySpec | Pay-by-specification NAT is no longer supported. Newly purchased pay-as-you-go NAT gateways only support the pay-by-CU metering method. | 按规格计费的NAT网关已经不再进行售卖，请选择按CU使用量计费的NAT网关 | 诊断 |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | 用户没有操作权限 | 诊断 |
| Forbidden.NoRiFound | No vlan router interfaces are found. | 没有可用的VLAN路由器接口。 | 诊断 | |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | 系统tag无效 | 诊断 |
| Forbidden.NotAllowedInState | The request does not allow in this state. | 该状态无法执行请求。 | 诊断 | |
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | 只有处于已取消、已拒绝、已终止、已分配、分配失败状态的物理专线才可以被删除。 | 诊断 |
| Forbidden.NotInRouterInterfaceCreateWhitelist | Not in router interface create whitelist. | 不在路由器接口的白名单中。 | 诊断 | |
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | Vbr和物理连接不在同一访问设备上。 | 诊断 |
| Forbidden.OnlyOneConnection | Cannot connect concurrently between same routers | 不能在同一路由器上发起连接。 | 诊断 | |
| Forbidden.OnlyOneConnection | The Specified routers have a connection already | 该路由器已有路由器接口连接。 | 诊断 | |
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | 开通IP地址池服务失败，请到配额中心申请权限。 | 诊断 |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | 操作被禁止，因为不允许发布自定义路由表中的路由条目。 | 诊断 |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | 操作托管的流日志，鉴权失败。 | 诊断 |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | 来自共享的资源不允许操作。 | 诊断 |
| 403 | Forbidden.OperationDeleteNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | 此用户不允许删除此边界路由器。 | 诊断 |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | 不允许删除边界路由器。 | 诊断 | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | 不允许终止边界路由器。 | 诊断 | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | 不允许恢复边界路由器。 | 诊断 | |
| 403 | Forbidden.OperationRecoverNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | 此用户不允许恢复此边界路由器。 | 诊断 |
| 403 | Forbidden.OperationTerminateNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | 此用户不允许终止此边界路由器。 | 诊断 |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | VbrOwnerId为RAM账号或合作伙伴账号，禁止作为VBR所属账号 | 诊断 |
| Forbidden.PeerGatewayIpNotAllowedByCaller | The caller is not allowed to specify the PeerGatewayIp parameter. | 不允许指定PeerGatewayIp参数。 | 诊断 | |
| Forbidden.PeeringSubnetMaskNotAllowedByCaller | The caller is not allowed to specify the PeeringSubnetMask parameter. | 不允许指定PeeringSubnetMask参数。 | 诊断 | |
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | 没有操作PhysicalConnectionId权限 | 诊断 |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | 只有共享端口所属的物理端口账号允许修改这些参数 | 诊断 |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | 只有共享端口所属的物理端口允许修改 | 诊断 |
| Forbidden.RAM | User not authorized to operate on the specified resource | RAM用户无权限执行此操作。 | 诊断 | |
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM校验不通过。 | 诊断 |
| Forbidden.RegionNotFound | Specified region is not found during access authentication. | 指定 Region 不存在，请您检查该 Region 是否正确。 | 诊断 | |
| 404 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | 当前Region不支持 | 诊断 |
| Forbidden.RiskControl | This operation is forbidden by Aliyun RiskControl system. | 该操作被风险控制系统禁止。 | 诊断 | |
| Forbidden.SecurityGroupNotFound | The specified SecurityGroup is not found | 该安全组不存在。 | 诊断 | |
| Forbidden.SnapshotNotFound | The specified Snapshot is not found | 该快照不存在。 | 诊断 | |
| Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach it?s limit. | SNAT条目数量已达到配额。 | 诊断 | |
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | SNAT条目数量已达到配额。 | 诊断 |
| Forbidden.SourceVSwitchId.Duplicated | The specified SourceCIDRis duplicated. | 该交换机已配置了 SNAT 规则，请您不要重复设置。 | 诊断 | |
| 400 | Forbidden.SourceVSwitchId.IncludeHaVip | There is some HaVips under specified VSwitch | 该交换机下有关联的HaVip。 | 诊断 |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | 您没有权限操作该资源，请您申请操作权限后再试。 | 诊断 |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | 标签资源重复 | 诊断 |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | 没有权限操作TagKeys | 诊断 |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | 该请求不允许操作此 tagkey | 诊断 |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | 不允许删除VPC，因为TR连接仍存在。 | 诊断 |
| Forbidden.UnassociateMaster | Unassociating a master instance is not allowed unless the parameter Force is True. | 非强制解绑时，不允许解绑master实例。 | 诊断 | |
| Forbidden.VbrAttached | cannot terminate physical connection when virtual border routers are still attached. | 无法终止专线接入，因为该专线尚有关联的边界路由器。 | 诊断 | |
| Forbidden.VBRExists | physical connection owner's vbr still exists. | 物理连接的VBR仍然存在。 | 诊断 | |
| Forbidden.VBRExists | vbr owner's vbr still exists. | 边界路由器仍然存在。 | 诊断 | |
| 400 | Forbidden.VBRExists | The vbr still exists. | vbr仍然存在，无法删除端口。 | 诊断 |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | 不能修改边界路由器的跨地域连接，请申请权限 | 诊断 |
| Forbidden.VlanIdNotAllowedByCaller | The caller is not allowed to specify the VlanId. | 不允许指定VLAN ID。 | 诊断 | |
| 400 | Forbidden.VpcNotFound | Specified VPC can not found. | 指定的VPC不存在，请您检查VPC是否正确。 | 诊断 |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | 共享端口UID不能是RAM账号或者合作伙伴账号 | 诊断 |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | 在访问鉴权时未找到指定的虚拟交换机 | 诊断 |
| ForbiddenAction | The user dose not supported this action. | 您没有权限执行该操作。 | 诊断 | |
| 400 | ForbiddenAction | The user does not supported this action. | 用户权限不支持 | 诊断 |
| 400 | ForbiddenAction | The user does not support this action. | 您没有所需的权限。 | 诊断 |
| ForbiddenRelease | Forbidden to release a prepaid instance within validity period | 不允许在合同期内释放预付费实例。 | 诊断 | |
| FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | 该网段必须是VPC网段的子集。 | 诊断 | |
| Forbindden | The specified Instance already bind eip | 该实例已经绑定了 EIP，请将 ECS 实例与 EIP 解绑后再添加该端口转发规则。 | 诊断 | |
| ForwardEntry.Duplicated | The specified ExternalIp | 指定的IP已经存在，请您重新填写IP。 | 诊断 | |
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | 检测到您近期存在频繁购买和释放EIP的行为，暂时无法进行新购。 | 诊断 |
| FUWU_BIZ_COMMODITY_VERIFY_FAIL | 你购买的模块非法 | 你购买的模块非法 | 诊断 | |
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | 查询辅助弹性网卡信息失败。 | 诊断 |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | 两个路由器之间已经创建了连接 | 诊断 |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | status参数无效 | 诊断 |
| 400 | Idempotence.Processing | Idempotence request is processing. | 被幂等请求处理中。 | 诊断 |
| IdempotentParameterMismatch | Request uses a client token in a previous request but is not identical to that request. | 请求使用的client token不一致。 | 诊断 | |
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | 指定参数 OwnerAccount 不合法 | 诊断 |
| 400 | IllegalParam.%s | The param of %s is illegal. | 指定的参数非法 | 诊断 |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | 请求参数中AccessMode.ModeValue参数不合法 | 诊断 |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | 请求参数中AccessMode.TunnelType参数不合法 | 诊断 |
| 400 | IllegalParam.Action | The specified Action is invalid. | 动作参数不合法。 | 诊断 |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | 指定的地址池类型无效。 | 诊断 |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | 指定的入参AddressType非法 | 诊断 |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | 采样间隔参数输入不合法 | 诊断 |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | 参数非法，DNAT转发协议为Any时，源端口和目标端口必须为0 | 诊断 |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | 指定的Asn不合规范。 | 诊断 |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | 参数AssociatedInstanceId非法。 | 诊断 |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | 指定的AssociatedPhysicalConnections不合法。 | 诊断 |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | Attachment非法。 | 诊断 |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | 至少有一种认证方法（Psk或者IDaas）应该被指定 | 诊断 |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | 传入的带宽不合法。 | 诊断 |
| 400 | IllegalParam.Bandwidth | The param of Bandwidth [%s] is illegal. | 传入的带宽不合法。 | 诊断 |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | Bandwidth参数不合法 | 诊断 |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | Bandwidth参数非法 | 诊断 |
| 400 | IllegalParam.Bandwidth | [%s] | 物理专线带宽值 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | 物理专线带宽值不合法。 | 诊断 |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | 当前指定的Bandwidth非法，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | 指定的BGP配置不合法 | 诊断 |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | 边界路由器的LocalAsn必须与ECR的asn相同 | 诊断 |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | BGP组的阿里云侧 BGP AS 号必须与 ECR的 AS号一致。 | 诊断 |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | 您输入的ChargeType非法，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | 参数ChargeType非法。 | 诊断 |
| 400 | IllegalParam.CidrBlock | The param of (%s) is illegal. | 网段不合法。 | 诊断 |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | CidrBlock参数非法。 | 诊断 |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | cidrBlock参数非法 | 诊断 |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | CidrBlock非法 | 诊断 |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | CidrBlock参数不合法 | 诊断 |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | CidrBlock掩码非法 | 诊断 |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | 指定的网段掩码不合法。 | 诊断 |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | 输入的cidrName非法 | 诊断 |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | 客户端网段（%s）不合法。 | 诊断 |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | ClientToken参数不合法 | 诊断 |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | 公司本地化名称 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | 公司本地化名称不合法。 | 诊断 |
| 400 | IllegalParam.CompanyName | [%s] | 公司名称 [%s] 不合法 | 诊断 |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | 公司名称不合法。 | 诊断 |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | 跨域带宽包不合法 | 诊断 |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | 指定的入参Day不合法 | 诊断 |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | 参数Description 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | 参数Description非法。 | 诊断 |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | 传入的目标地址不合法 | 诊断 |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | 参数DestinationCidrBlock非法。 | 诊断 |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | 非法参数：目的CIDR。 | 诊断 |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | DetectMultiplier参数不在适当范围内。 | 诊断 |
| 400 | IllegalParam.DhcpOptionsSetDescription | The specified DhcpOptionsSetDescription is invalid. | 指定的DhcpOptionsSetDescription参数不合法，请检查该参数是否正确。 | 诊断 |
| 400 | IllegalParam.DhcpOptionsSetName | The specified DhcpOptionsSetName is invalid. | 指定的DhcpOptionsSetName参数不合法，请检查该参数是否正确。 | 诊断 |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | 指定的DomainName参数不合法，请检查该参数是否正确。 | 诊断 |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | 指定的DomainName不合法 | 诊断 |
| 400 | IllegalParam.DomainNameServers | The specified DomainNameServers is invalid. | 指定的DomainNameServers参数不合法，请检查该参数是否正确。 | 诊断 |
| 400 | IllegalParam.EgressAclEntryId | The specified EgressAclEntryId is invalid. | 出方向ACL规则ID非法 | 诊断 |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | 当 VPN 网关启用 BGP 时，VPN 连接必须启用 BGP。 | 诊断 |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | 指定Ipv6CidrBlock时EnableIpv6不能是False | 诊断 |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | 参数EnableIpv6非法。 | 诊断 |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | 过滤参数Key不合法。 | 诊断 |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | 过滤参数Value不合法。 | 诊断 |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | 过滤参数不支持只输入ResourceId或者ResourceName而不输入ResourceType。 | 诊断 |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | 输入的GatewayType非法 | 诊断 |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | 健康检查IP不合法。 | 诊断 |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | Healthcheck ip不能与实例ip相等。 | 诊断 |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | 指定的IDaaS应用实例ID不合法，应用实例需要基于专属SSL VPN的模板创建。 | 诊断 |
| 400 | IllegalParam.IngressAclEntryId | The specified IngressAclEntryId is invalid. | 入方向ACL规则ID非法 | 诊断 |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | VBR 倒换组实例参数是非法的。 | 诊断 |
| 400 | IllegalParam.InstanceType | The specified instance type is invalid. Only ECS instances and network interface are allowed. | 绑定的实例类型不允许。 | 诊断 |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | 参数InstanceType非法。 | 诊断 |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | 您指定的InternetChargeType非法，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.IpAddress | The specified IP address (%s) is illegal. | IP地址不合法 | 诊断 |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | IpAddress参数不合法 | 诊断 |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | 指定的IP地址格式非法，请按API文档参数说明修改后再重试 | 诊断 |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | 指定的IpAddress不合法 | 诊断 |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | IPAM Pool不可以为空。 | 诊断 |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | 指定的Ipv4CidrMask不合法。 | 诊断 |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | Ipv6地址不合法 | 诊断 |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | 您指定的ipv6地址非法，请检查您的输入是否正确 | 诊断 |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | Ipv6实例Id不合法 | 诊断 |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | 指定的Ipv6CidrBlock非法。 | 诊断 |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | IPv6 网段不合法 | 诊断 |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | 参数Ipv6CidrBlock非法。 | 诊断 |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | 参数IPv6CidrType非法。 | 诊断 |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | 指定的Ipv6Isp参数不合法。 | 诊断 |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | 指定的入参Ipv6Prefix非法 | 诊断 |
| 400 | IllegalParam.ipVersion | The IP version does not match. | ip version不匹配 | 诊断 |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | 参数中的ip版本非法。 | 诊断 |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | 非法参数：IpVersion。 | 诊断 |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | 参数 IpVersion 异常,请核对参数后重试. | 诊断 |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | 参数IpVersion非法。 | 诊断 |
| 400 | IllegalParam.Isp | The param of %s is illegal. | 无法分配EIP，因为ISP参数非法 | 诊断 |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | 参数 Isp 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | 输入的任务时长不合法。 | 诊断 |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | 输入的故障演练任务ID不合法。 | 诊断 |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | 输入的任务类型不合法。 | 诊断 |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | 指定的LeaseTime参数不合法 | 诊断 |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | 运营商线路运维联系方式不合法 | 诊断 |
| 400 | IllegalParam.LineType | [%s] | 物理专线类型 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.LineType | Invalid LineType. | 物理专线类型不合法。 | 诊断 |
| 400 | IllegalParam.LocalAsn | The specified LocalAsn is invalid. | 本端自治系统号不合法。 | 诊断 |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | LocalAsn参数不合法 | 诊断 |
| 400 | IllegalParam.LocalBgpIp | The specified LocalBgpIp is invalid. | 本端BGP地址不合法。 | 诊断 |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | 本端网关IP和掩码非法，请更正后重试。 | 诊断 |
| 400 | IllegalParam.LocalSubnet | The specified "LocalSubnet" (%s) is invalid. | 本端网段(%s)不合法。 | 诊断 |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | ProjectName和LogStoreName 参数传入非法，必须同时传入或者同时不传。 | 诊断 |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | MaxResults 参数不合法。 | 诊断 |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | 指定的 MinRxInterval 不在适当的范围内。 | 诊断 |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | 指定的 MinTxInterval 不在适当的范围内。 | 诊断 |
| 400 | IllegalParam.Mode | The specified value of the parameter Mode is invalid. | 参数Mode的值不合法。 | 诊断 |
| 400 | IllegalParam.Mode | The specified Mode is invalid. | 入参Mode非法 | 诊断 |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | 参数Mode非法。 | 诊断 |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | 参数 Name 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | NatIpPort参数不合法。 | 诊断 |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | NetworkInterfaceId参数不合法。 | 诊断 |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | 网络类型不合法。 | 诊断 |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | NetworkType 不合法 | 诊断 |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | 您输入的NetworkType非法，请检查您的输入是否正确 | 诊断 |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | 参数NextToken非法. | 诊断 |
| 400 | IllegalParam.NextTokenExpired | The specified NextToken is invalid. | 参数NextToken非法. | 诊断 |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | 参数NextTokenExpired非法。 | 诊断 |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | 您还未通过实名认证，不符合购买条件。请登录用户中心进行实名认证. | 诊断 |
| 400 | IllegalParam.OrderKey | The specified OrderKey is invalid. | 参数OrderKey非法. | 诊断 |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | OrderMode参数非法 | 诊断 |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | OrderMode参数非法 | 诊断 |
| 400 | IllegalParam.OrderType | The specified OrderType is invalid. | 参数OrderType非法. | 诊断 |
| 400 | IllegalParam.OwnerAliUid | The specified AliUid is invalid. | 该用户ID为非法参数 | 诊断 |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | VbrOwnerId参数非法 | 诊断 |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | 资源拥有者阿里用户ID不合法。 | 诊断 |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | PeerAsn参数不合法 | 诊断 |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | 掩码非法，请更正后重试。 | 诊断 |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | peerIpAddress参数非法 | 诊断 |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | 对端Ip地址非法。 | 诊断 |
| 400 | IllegalParam.PeerLocation | [%s] | 物理专线的地理位置 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | 物理专线的地理位置不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | PmCertificateNo参数不合法 | 诊断 |
| 400 | IllegalParam.PmCertificateNo | [%s] | 施工工程师证件号码 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | 施工工程师证件号码不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateType | [%s] | 施工工程师证件类型 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | 施工工程师证件类型不合法。 | 诊断 |
| 400 | IllegalParam.PmContactInfo | [%s] | 施工工程师联系方式 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | 施工工程师联系方式不合法。 | 诊断 |
| 400 | IllegalParam.PmGender | [%s] | 施工工程师性别 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmGender | Invalid PmGender. | 施工工程师性别不合法。 | 诊断 |
| 400 | IllegalParam.PmName | [%s] | 施工工程师姓名 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmName | Invalid PmName. | 施工工程师姓名不合法。 | 诊断 |
| 400 | IllegalParam.Policy | Param Policy illegal. | 非法参数：Policy | 诊断 |
| 400 | IllegalParam.PortRange | The specified port range is invalid. | 端口范围参数不合法。 | 诊断 |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | 优先级参数不合法。 | 诊断 |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | 指定的Priority不合法或与其他的镜像会话相同 | 诊断 |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | 指定的PrivateIpAddress无效。请检查参数约束，并在修改后重试。 | 诊断 |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | 参数ProductType非法 | 诊断 |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | 协议参数不合法。 | 诊断 |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | 非法参数：Protocol。 | 诊断 |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | regionId不合法 | 诊断 |
| 400 | IllegalParam.RemoteSubnet | The specified "RemoteSubnet" (%s) is invalid. | 对端网段(%s)不合法。 | 诊断 |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | 参数 ReservedCidrMask 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | 指定的资源组非法或不存在 | 诊断 |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | 输入的参数资源ID不合法 | 诊断 |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | 资源所属用户ID参数输入非法. | 诊断 |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | 指定的ResourceType未支持或不合法 | 诊断 |
| 400 | IllegalParam.ResourceType | Invalid %s value. | 传入的参数ResourceType不合法 | 诊断 |
| 400 | IllegalParam.Role | The specified Role is invalid. | Role参数不合法。 | 诊断 |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | 目的地址不合法。 | 诊断 |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | 存在重复的路由地址块 | 诊断 |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | 指定路由名称不合法 | 诊断 |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | 指定的路由条目类型不合规范。 | 诊断 |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | 参数RouteEntryType非法。 | 诊断 |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | BGP组中的每个BGP邻居可接收的路由条目数超过配额。 | 诊断 |
| 400 | IllegalParam.SecondaryCidrBlock | SecondaryCidrBlock is illegal. | 附加网段参数错误 | 诊断 |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | 参数SecondaryCidrBlock非法。 | 诊断 |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | 指定的SecondaryCidrMask不合法。 | 诊断 |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | 传入的SecurityProtectionTypes参数非法 | 诊断 |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | ServiceLocation参数非法。 | 诊断 |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | 参数ServiceProvider非法。 | 诊断 |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | 会话日志投递目标参数(SessionLogDeliveryDestination)配置格式无效 | 诊断 |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | 会话日志投递目标类型参数SessionLogDeliveryType输入不符合要求 | 诊断 |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | 参数ShareType不合法。 | 诊断 |
| 400 | IllegalParam.Si | [%s] | 物理专线施工单位 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.Si | Invalid Si. | 物理专线施工单位不合法。 | 诊断 |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | 参数SourceCidrBlock非法。 | 诊断 |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | 非法参数：源CIDR | 诊断 |
| 400 | IllegalParam.Spec | The parameter Spec is illegal. | Spec不合法 | 诊断 |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | Spec不合法 | 诊断 |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | ExpectSpec参数非法 | 诊断 |
| 400 | IllegalParam.Spec | The spec is illegal. | spec不合法 | 诊断 |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | 参数Spec非法。 | 诊断 |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | 参数TargetType非法。 | 诊断 |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | 流量镜像筛选规则实例Id参数非法。 | 诊断 |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | 传入的trafficPath参数非法。 | 诊断 |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | 参数TunnelCidr不合法。 | 诊断 |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | TunnelId参数非法。 | 诊断 |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | 参数Type非法。 | 诊断 |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | 接入点类型不支持创建高可靠物理专线。 | 诊断 |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | UserCidr 不合法 | 诊断 |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | 参数UserCidr非法。 | 诊断 |
| 400 | IllegalParam.VlanId | The parameter VlanId is illegal. | VlanId参数非法 | 诊断 |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | VlanId不合法 | 诊断 |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | VlanId已经被使用 | 诊断 |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | 参数VpcIPv6CidrBlock非法。 | 诊断 |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | Vpconn的AliUid不合法 | 诊断 |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | Vpconn的AliUid参数不合法 | 诊断 |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | VRouterType不合法 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | VSwitchCidrReservationMask 参数不合法，请参考API文档参数说明修改后重试。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | 指定的 VSwitchCidrReservationMask 必须大于VSwitch的掩码 + 2。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | 指定的 VSwitchCidrReservationMask 必须大于 VSwitch 的掩码 + 1。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | 指定的 VSwitchCidrReservationMask 至少比 VSwitch 的掩码大 2。 | 诊断 |
| 400 | IllegalParam.Zone | The specified zone is invalid. | 参数Zone非法 | 诊断 |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | 参数ZoneId非法。 | 诊断 |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | 参数Zones非法 | 诊断 |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | 参数LocalGatewayIpAndMask无效。 | 诊断 |
| 400 | IllegalParamFormat | IllegalParamFormat | 参数格式不正确 | 诊断 |
| 400 | IllegalParamFormat | The param of %s is illegal. | 指定的参数不合法 | 诊断 |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | 参数模式非法 | 诊断 |
| 400 | IllegalParamFormat.Description | The specified description is invalid. | 描述参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | 目的CIDR格式不正确。 | 诊断 |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | 目标CIDR参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | 目的端口范围参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.Name | The specified Name is invalid. | 名称参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.NatIp | The param format of %s[%s] is illegal. | NatIp的格式不正确。 | 诊断 |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | 输入参数NatIpCidr不合法 | 诊断 |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | OutIp参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | Cidr格式不合法 | 诊断 |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | 源CIDR参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | 源端口范围参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | VSwitchCidrReservationCidr参数格式非法 | 诊断 |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | 参数AssociatedInstanceId长度非法 | 诊断 |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | 出方向筛选规则数量不合法。 | 诊断 |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | 入方向筛选规则的数量不合法。 | 诊断 |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | 流量镜像筛选规则参数个数非法。 | 诊断 |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | Zones数组大小非法 | 诊断 |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | 路由条目下一跳类型非法。 | 诊断 |
| IncorrcetRouteEntryStatus | Some route entry status blocked this operation. | 无法执行该操作，因为有些路由条目的状态是pending或modifying。 | 诊断 | |
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | 当前业务状态不支持创建流日志实例 | 诊断 |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | 当前物理专线处于欠费状态，不能进行此操作。 | 诊断 |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | 当前业务状态不支持创建IP地址池实例。 | 诊断 |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | 输入的资源处于欠费状态。 | 诊断 |
| 400 | IncorrectBusinessStatus.TrafficMirror | The business status of traffic mirror is incorrect. | 流量镜像的商业状态不正确。 | 诊断 |
| 404 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | 该VPC已经开启ClassicLink。 | 诊断 |
| IncorrectEipStatus | Current elastic IP status does not support this operation | 当前EIP的状态不支持该操作。 | 诊断 | |
| IncorrectEipStatus | Current elastic IP status does not support this operation. | 指定的EIP状态不支持此操作。 | 诊断 | |
| IncorrectGlobalAccelerationInstanceIdStatus | Current GlobalAccelerationInstance status does not support this operation. | 指定的全球加速实例状态不支持此操作 | 诊断 | |
| IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is InUse. | 只有当HAVIP的状态是InUse时，才可以执行该操作。 | 诊断 | |
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | 无法执行该操作，因为HaVip的状态是Available或InUse。 | 诊断 |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it’s status is Available or InUse. | 只有当HaVip的状态是Available或InUse时，才可以执行该操作。 | 诊断 |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | 只有当HaVip的状态为可用或正在使用时，才能通过此操作操作HaVip | 诊断 |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | Havip实例为Available或InUse才允许操作 | 诊断 |
| IncorrectInstanceStatus | The current status of instance does not support this operation. | 当前实例的状态不支持该操作。 | 诊断 | |
| IncorrectInstanceStatus | The current status of the resource does not support this operation. | 当前资源的状态不支持该操作。 | 诊断 | |
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it’s status is Running or Stopped. | 只有当ECS实例的状态为运行中或者停止状态时，才可执行该操作。 | 诊断 | |
| IncorrectInstanceStatus | Current instance status does not support this operation. | 当前实例的状态不支持该操作。 | 诊断 | |
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it's status is Running or Stopped. | 只有当ECS实例的状态为运行中或者停止状态时，才可执行该操作。 | 诊断 | |
| IncorrectOppositeInterfaceInfo | Cannot connect on the same router | 不允许连接相同的路由器。 | 诊断 | |
| IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId is wrong. Maybe the RouterInterface or Router does not exist | 根据OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId的设置，OppositeRouterInterface的值不正确。也许路由器或路由器接口不存在。 | 诊断 | |
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId指定的对端路由器接口信息错误。可能是RouterInterface 或Router不存在，或者参数不匹配，或者RouterInterface不是连接接收方。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId指定的对端路由器接口信息错误。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId指定的对端路由器接口信息错误。 | 诊断 |
| IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId must be all set. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId这四个参数必须全部指定。 | 诊断 | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 必须全部设置。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | 参数OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId必须全部设置。 | 诊断 |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | 仅当路由器接口处于“Active”状态时，才可以使用该操作。 | 诊断 |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | 只有路由器接口处于“闲置”状态时，才可以使用此操作。 | 诊断 |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | 只有当状态为“非活动”时，才能通过此操作操作RouterInterface。 | 诊断 |
| IncorrectRole.NotInitiatingSide | The specified RouterInterface is not InitiatingSide. | 该路由器接口不是发起端，请选择发起端的路由器接口进行发起连接。 | 诊断 | |
| IncorrectRouteEntryStatus | Vpc NotStable route entry. | 无法执行该操作，当前路由表中有路由条目的状态为pending或modifying。 | 诊断 | |
| IncorrectRouteEntryStatus | The vpc has NotStable routeEntry status. | 无法执行该操作，当前路由表中有路由条目的状态为pending或modifying。 | 诊断 | |
| IncorrectRouteEntryStatus | VBR has NotStable route entry. | 无法执行该操作，边界路由表中有路由条目的状态为pending或modifying。 | 诊断 | |
| IncorrectRouteEntryStatus | Specified routeEntry status error. | 无法执行该操作，当前路由表中有路由条目的状态为pending或modifying。 | 诊断 | |
| IncorrectRouteEntryStatus | Some route entry status blocked this operation. | 无法执行该操作，当前路由表中有路由条目的状态为pending或modifying。 | 诊断 | |
| 404 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | 当前路由表的状态不支持删除操作 | 诊断 |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | 无法删除指定的路由表，因为表中仍然存在用户自定义路由条目。 | 诊断 |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | 只有当路由表的类型为自定义时，才能通过此操作删除路由表。 | 诊断 |
| IncorrectStatus | RouterInterface can be operated by this action only when the status is Active | 只有当路由器接口的状态为Active时，才可执行该操作。 | 诊断 | |
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Inactive. | 只有当路由器接口的状态为Inactive时，才可执行该操作。 | 诊断 | |
| IncorrectStatus | RouterInterface can be operated by this action only when it’s status is Idle. | 只有当路由器接口的状态为Idle时，才可执行该操作。 | 诊断 | |
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Active. | 只有当路由器接口的状态为Active时，才可执行该操作。 | 诊断 | |
| 400 | IncorrectStatus | HaVip can be deleted only when it is status is Available. | 无法删除HAVIP。只有当HAVIP的状态为Available时才可用。 | 诊断 |
| IncorrectStatus | This openeration would be allowed only when status of this RouterInterface is Idle/Inactive. | 无法执行该操作。只有当路由器接口的状态是Idle/Inactive时，才可以操作。 | 诊断 | |
| IncorrectStatus | Vswtich status not stable. | 当前交换机的状态为pending或modifying，请您稍后再试。 | 诊断 | |
| 400 | IncorrectStatus | HaVip can be deleted only when status is Available or InUse. | 删除HAVIP失败，HAVIP的状态不支持。 | 诊断 |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | 只有当状态为“活动”、“空闲”或“非活动”时，才能通过此操作操作RouterInterface。 | 诊断 |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | 指定实例的状态无效 | 诊断 |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | 无效的BgpPeer状态无法运行。 | 诊断 |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | BondRi 状态在非稳态，请确认实例状态后重试。 | 诊断 |
| 400 | IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | CBN当前状态不正确 | 诊断 |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | 操作失败，VPC在CEN中状态未达稳态。 | 诊断 |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | 请检查cen 状态 | 诊断 |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | 当前预留网段状态不支持该操作，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.DhcpOptionsSet | The DhcpOptionsSet status does not support this operation. | DHCP选项集实例处于中间状态不允许操作，请等待实例状态达到稳态后在操作。 | 诊断 |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | 指定的EgressOnlyRlue当前状态不支持删除。 | 诊断 |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | 指定的IPv6EgressOnlyRule未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.Eip | An EIP status error occurred. | eip状态有误。 | 诊断 |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | EIP的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | flowlog状态无效，无法停止 | 诊断 |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | 要删除的DNAT条目实例状态不对 | 诊断 |
| 400 | IncorrectStatus.FullNatEntry | The status of %s [%s] is incorrect. | FullNatEntry当前状态不正确。 | 诊断 |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | 指定的网关路由表实例处于非稳态，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | 实例的状态无效 | 诊断 |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | IP的状态不正确。 | 诊断 |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | Ipv4Gateway状态处于非稳态 | 诊断 |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | 指定的Ipv4Gateway处于非稳态，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | 指定的下一跳的IPv6地址此时正在被创建或删除中。 | 诊断 |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | 您指定的Ipv6Gateway处于非稳态，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | 您指定的Ipv6Instance实例处于非稳态，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | IPv6公网带宽当前状态不支持创建IPv6仅出规则。 | 诊断 |
| 400 | IncorrectStatus.NatGateway | The status of NAT gateway is incorrect. | NAT网关状态不对。 | 诊断 |
| 400 | IncorrectStatus.NatGateway | The status of natgateway is incorrect. | NAT网关的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | nat网关状态不正确 | 诊断 |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | NAT网关实例正在被删除，无法重复删除，需要等待删除过程完成。 | 诊断 |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | 指定的NatGateway未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.NATGW | The status of the specified NAT gateway is abnormal. | NAT网关状态异常。 | 诊断 |
| 400 | IncorrectStatus.NATGW | NATGW status is invalid. | NAT网关的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.NatIp | The status of %s [%s] is incorrect. | NatIp当前状态不正确。 | 诊断 |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | 弹性网卡状态不正确。 | 诊断 |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | 当前网卡状态不支持该操作，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | 指定的下一跳资源处于非稳态 | 诊断 |
| 400 | IncorrectStatus.null | RouterInterface status is null. | RI状态为空 | 诊断 |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | 只有待演练的故障演练任务才可以修改或执行开始。 | 诊断 |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | 只有待演练或者已完成状态的故障演练任务才能被删除。 | 诊断 |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | 只有演练中状态的故障演练任务才可以被结束。 | 诊断 |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | 当前物理专线的状态不正常，不能进行此操作。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in the Allocated state. | 物理专线状态不对。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status of PhysicalConnection is incorrect. | PhysicalConnection状态非法 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s is incorrect. | PhysicalConnection状态非法。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status of [%s] is incorrect. | PhysicalConnection状态非法 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | 指定的PhysicalConnectionId没有处于已分配状态 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | 实例状态不正确 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | 物理专线 [%] 状态不正常。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | 物理专线状态不正常。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | 物理专线施工状态 [%s] 不正常。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | 物理专线施工状态不正常。 | 诊断 |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | PrefixList处于中间态，无法操作 | 诊断 |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | 无法分配EIP，因为IP地址池状态不对 | 诊断 |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | 地址池实例未处于稳态，不允许分配EIP。 | 诊断 |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | 当前QoS策略状态异常，无法进行操作，请稍等后尝试。 | 诊断 |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | 输入的资源ID对应的资源状态不合法。 | 诊断 |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | 路由条目处于非稳态 | 诊断 |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | 路由条目的路由发布状态不正确。 | 诊断 |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | 路由表传播状态未进入稳态，请稍等后重试。 | 诊断 |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | RouterEntry当前状态不正确。 | 诊断 |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because status of this RouterInterface is not correct. | 当前实例的状态无法进行删除，请等待状态变更后再次进行操作。 | 诊断 |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because the status of this RouterInterface is not correct. | 当前实例的状态无法进行删除，请等待状态变更后再次进行操作。 | 诊断 |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | 路由器接口状态异常。 | 诊断 |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | 指定的路由表状态不对 | 诊断 |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | 指定的路由表状态不对 | 诊断 |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | 指定的路由表未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | 诊断 |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | 无法操作系统prefixList | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | 流量镜像筛选条件的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | 流量镜像筛选规则的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | 流量镜像会话状态不正确。 | 诊断 |
| 400 | IncorrectStatus.VBR | The status of VBR is incorrect. | VBR状态非法。 | 诊断 |
| 400 | IncorrectStatus.VbrId | The status of %s is incorrect. | VBR实例状态非法。 | 诊断 |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | 共享物理专线 [%s] 状态不正确。 | 诊断 |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | 当前实例状态非稳态 | 诊断 |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | VPC未处于稳态 | 诊断 |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | VPC未处于稳态. | 诊断 |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | 指定的VPC未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.VpcDhcpOptionsSet | The dhcpOptionsSet status of VPC does not support this operation. | 当前VPC绑定的DHCP选项集状态处于中间态不允许操作。 | 诊断 |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | 当前VPC中的DHCP选项集实例状态不支持删除VPC | 诊断 |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | 当前VPC的私网域名状态不支持该操作。 | 诊断 |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | %s[%s]的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.VpcRouteEntry | The status of the specified routeEntry is invalid. | VPC路由条目状态不正确。 | 诊断 |
| 400 | IncorrectStatus.VSWITCH | The status of the specified VSwitch is invalid. | 虚拟交换机状态异常。 | 诊断 |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | 指定的vSwitch处于非稳态。 | 诊断 |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | 虚拟交换机状态异常。 | 诊断 |
| IncorrectVpcStatus | Current VPC status does not support this operation. | 当前VPC的状态无法支持这个操作。 | 诊断 | |
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | 权限校验过程中，未找到指定的虚拟交换机（vSwtich）实例 | 诊断 |
| IncorrectVSwitchStatus | VSwitch Creation simultaneously is not supported. | 创建交换机失败，VPC中有交换机的状态为Creating。 | 诊断 | |
| 400 | IncorrectVSwitchStatus | Some virtual switch is modifying within the same VPC. | 同一个VPC下存在多个“修改中”的虚拟交换机，请您稍后重试。 | 诊断 |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | 该vSwitch处于pending状态，无法删除。 | 诊断 |
| IncorretForwardEntryStatus | Some Forward entry status blocked this operation.. | 无法执行该操作。DNAT表中有DNAT条目的状态处于Pending或Modifying状态。 | 诊断 | |
| IncorretForwardEntryStatus | The Specified forwardEntry is not stable status | 该DNAT条目状态不稳定。 | 诊断 | |
| IncorretForwardEntryStatus | The Specified forwardEntry is not exist | 该DNAT条目不存在。 | 诊断 | |
| IncorretRouteEntryStatus | 同一个 VPC 下面的路由表中的任一个路由条目/VSwitch 处在中间状态（添加中/修改中/删除中），不能创建路由条目 | 诊断 | ||
| IncorretSnatEntryStatus | Some Snat entry status blocked this operation.. | 无法执行该操作。SNAT表中有SNAT条目的状态处于Pending或Modifying状态。 | 诊断 | |
| IncorretSnatEntryStatus | The Specified SnatEntry is not stable status | 该SNAT条目状态不稳定。 | 诊断 | |
| IncorretVSwitchStatus | 部分 VSwitch 处于 pending 状态，创建 VSwitch 失败. | 诊断 | ||
| 400 | InnerError | Internal system error. | 内部系统错误 | 诊断 |
| 404 | Instance.NotExist | The instance not exist. | 实例不存在。 | 诊断 |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | 实例状态不允许 | 诊断 |
| 400 | Instance.StatusError | The status of instance error. | 实例状态错误。 | 诊断 |
| 400 | InstanceExist.NatgwScheduledMigration | The scheduled migration information of the NAT gateway already exists. | NAT网关预约迁移信息已存在。 | 诊断 |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | NAT网关实例不存在 | 诊断 |
| 400 | InstanceNotExist.NATGWSchedule | The scheduled migration information of the NAT gateway does not exist. | NAT网关预约迁移信息不存在。 | 诊断 |
| 404 | InstanceNotExists | Instance not exists. | 要删除的实例不存在 | 诊断 |
| INSTANCE_HAS_INACTIVE_CHANGE | 变更正在处理中。 | 诊断 | ||
| InsufficientBalance | Your account does not have enough balance. | 账户余额不足，请先充值再操作。 | 诊断 | |
| InsufficientBalance.Eip | Your account does not have enough balance. | 账户余额不足，请先充值再操作。 | 诊断 | |
| InsufficientEipCapacity | Insufficient EIP capacity to fulfill your request. | EIP配额不足 | 诊断 | |
| INSUFFICIENT_BALANCE | 账户余额不足。 | 诊断 | ||
| InternalError | The request processing has failed due to some unknown error | 请求处理由于某些未知错误失败。 | 诊断 | |
| 400 | InternalError | The request processing has failed due to some unknown error. | 请求处理由于某些未知错误失败。 | 诊断 |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | 内部错误 | 诊断 |
| 500 | InternalError | Internal system error. | 内部系统错误。 | 诊断 |
| 400 | INVAID.VBR.STATUS | VBR status must be active | VBR状态无效 | 诊断 |
| 400 | Invalid.Grant | Can not grant to other owner cen. | 无法将VBR跨账号授权至其他CEN。 | 诊断 |
| Invalid.natgwNotExist | The specified natgateway not exist. | 该NAT网关不存在。 | 诊断 | |
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | 参数Status无效 | 诊断 |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | 未找到指定的access key | 诊断 |
| InvalidAccessPoint.NotExist | The accessPoint not exit | 该接入点不存在。 | 诊断 | |
| InvalidAccessPoint.NotMatch | The accessPoint id is not matched | 该接入点ID不正确。 | 诊断 | |
| InvalidAccessPoint.ValueNotAllowed | The non-vbr router interface cannot have access point configured. | 非边界路由器的路由器接口不能配置接入点。 | 诊断 | |
| InvalidAccessPoint.ValueNotAllowed | The non-vbr opposite router interface cannot have opposite access point configured. | 非边界路由器的路由器接口不能配置接入点。 | 诊断 | |
| 400 | InvalidAccessPointId.NotEnabled | Invalid access point status. | 当前接入点暂无足够资源可支持接入，请联系您的商务经理 | 诊断 |
| InvalidAccessPointId.NotFound | The AccessPointId provided does not exist in our records. | 该 AccessPointId 不存在。 | 诊断 | |
| 400 | InvalidAccount.NotFound | The account is invalid. | 操作失败，使用了无效的调用账号。 | 诊断 |
| 400 | InvalidAction.Denied | Action is denied due to unfinished Eip configuration modification. | 由于未完成Eip配置修改，操作被拒绝。 | 诊断 |
| 400 | InvalidAliuid | Invalid Aliuid. | Aliuid无效 | 诊断 |
| InvalidAllocationId.NotFound | Specified allocation id is not found. | 指定的公网 IP 不存在，请您检查填写的公网 IP 是否正确。 | 诊断 | |
| InvalidAllocationId.NotFound | Specified allocation ID is not found.. | 指定的公网 IP 不存在，请您检查填写的公网 IP 是否正确。 | 诊断 | |
| 404 | InvalidAllocationId.NotFound | Specified allocation ID is not found | 指定的公网IP不存在，请您检查您填写的参数是否正确。 | 诊断 |
| InvalidAssociation.Duplicated | Specified instance already is associated. | 该实例已绑定EIP或全球加速实例，不能再绑定，如需更换实例绑定的EIP或全球加速实例，请先解绑。 | 诊断 | |
| 400 | InvalidAttachment.NotFound | The attachment is not found. | Attachment不存在。 | 诊断 |
| 400 | InvalidAuthkey.Malformed | The specified BGP authentication key (%s) is malformed. | 该BGP认证密钥不合法。 | 诊断 |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | 当前可用区内无可用资源。 | 诊断 |
| InvalidBackendServerId.NotFound | The specified BackendServerId is not found. | 后端服务器实例不存在，请您检查后端服务器实例是否正确。 | 诊断 | |
| InvalidBackendServerId.NotInVPC | The specified BackendServerId is not in VPC. | 指定的 BackendServerId 不是 VPC 类型。 | 诊断 | |
| InvalidBackendServerRegionId.EqualRegionId | The specified BackendServerRegionId can not be the same as RegionId. | 指定的 BackendServerRegionId 不能与 RegionId 相同。 | 诊断 | |
| InvalidBackendServerRegionId.Mismatch | The specified BackendServerRegionId is not in the GlobalAccelerationInstance’s ServiceLocation. | 指定的 BackendServerRegionId 不在全球加速实例的服务区域中。 | 诊断 | |
| InvalidBackendServerRegionId.NotFound | The specified BackendServerRegionId is not found. | 指定的 BackendServerRegionId 不存在 | 诊断 | |
| InvalidBackendServerType.NotFound | The specified BackendServerType is not supported. | 指定的后端服务器类型不支持。 | 诊断 | |
| InvalidBandwidth | invalid physical connection banwidth. | 物理专线的带宽不合法。 | 诊断 | |
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | 带宽包不足 | 诊断 |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | 带宽计划的带宽不足。 | 诊断 |
| InvalidBandwidth.ValueNotSupported | The specified value of Bandwidth not supported. | 指定的带宽峰值不支持。 | 诊断 | |
| 400 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackageId does not exist in our records. | 指定的带宽包ID不存在。 | 诊断 |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | 指定的共享带宽包不存在 | 诊断 |
| 400 | InvalidBandwidthPackageIdNumber.NotSupported | The number of BandwidthPackageIds exceeds the limit. | 共享带宽包的数量超过Quota限制。 | 诊断 |
| InvalidBgpAuthkey.Malformed | Specified Bgp Group authkey is not valid. | 该BGP组的验证密钥不合法。 | 诊断 | |
| InvalidBgpDescription.Malformed | Specified Bgp Group description is not valid. | 该BGP组的描述不合法。 | 诊断 | |
| InvalidBgpDiscription.Malformed | Specified Bgp Group description is not valid. | 该BGP组的描述不合法。 | 诊断 | |
| InvalidBgpGroup | bgp group not exists | 该BGP组不存在。 | 诊断 | |
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | 边界路由器已经绑定了专线网关，不允许修改本端AS，要修改请先解绑专线网关 | 诊断 |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | 指定的BgpGroup LocalAsn无效，仅支持64512到65534或420000000到429496729 | 诊断 |
| InvalidBgpName.Malformed | Specified Bgp Group name is not valid. | 该BGP组的名称不合法。 | 诊断 | |
| InvalidBindingStatus | The eip binding status invalid. | EIP绑定状态不正确。 | 诊断 | |
| InvalidChargeType.ValueNotSupported | The specified ChargeType is not supported. | 该计费方式不支持，请您重新选择计费方式。 | 诊断 | |
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | 可能的报错原因： 1. 您不在10.0.0.0/8的路由网段的白名单中，不能使用该网段。 2. 添加的自定义路由目标网段不能从属于同一个VPC下面所有交换机的网段。 3. 由于100.64.0.0/10是云服务地址，您不能再添加该网段指向云下IDC。 4. 除100.64.0.0/10以外，100.64.0.0/11、100.96.0.0/11等明细路由网段均不能使用在云下IDC。 | 诊断 |
| InvalidCidrBlock | Specified CIDR block is already exists. | 该交换机网段与其他交换机的网段重叠或与已有的自定义路由的目标网段重叠，请使用其他未被占用的网段。 | 诊断 | |
| InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | 该网段已经在该路由表中存在。 | 诊断 | |
| InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | 该CIDR格式不正确。 | 诊断 | |
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other subnets. | 该交换机网段与其他交换机的网段重叠或与已有的自定义路由的目标网段重叠，请使用其他未被占用的网段。 | 诊断 | |
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other entry. | 该交换机网段与其他交换机的网段重叠或与已有的自定义路由的目标网段重叠，请使用其他未被占用的网段。 | 诊断 | |
| InvalidCircuitCode.Malformed | The specified CircuitCode is not valid. | 该CircuitCode不合法。 | 诊断 | |
| InvalidCircuitCode.Malformed | circuitCode is illegal. | 该CircuitCode不合法。 | 诊断 | |
| 400 | InvalidCirdrBlock.MaskLength | Specified CIDR block is not valid . | 该CIDR网段格式不正确。 | 诊断 |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | 客户端网段与VPC内其他资源冲突。 | 诊断 |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | Commodity不存在 | 诊断 |
| 404 | InvalidCustomerGatewayInstanceId.NotFound | The specified customer gateway instance id does not exist. | 指定的用户网关实例不存在，请您检查用户网关实例ID是否正确。 | 诊断 |
| InvalidDescription | The description is not valid | 描述格式不合法。 | 诊断 | |
| 400 | InvalidDescription.Malformed | The Description is illeagl. | 指定的资源描述格式不合法。长度为2～256个字符，不能以http://和https://开头。 | 诊断 |
| InvalidDescription.Malformed | The specifid ‘Description’ is not valid. | 描述格式不合法。 | 诊断 | |
| InvalidDescription.Malformed | The specifid "Description" is not valid. | 指定的资源描述格式不合法。长度为2-256个字符，不能以 http:// 和 https:// 开头。 | 诊断 | |
| 400 | InvalidDescription.Malformed | The specifid ?Description? is not valid. | 指定的资源描述格式不合法。长度为2～256个字符，不能以http://和https://开头。 | 诊断 |
| 400 | InvalidDescription.Malformed | The Description is illegal. | 指定的资源描述格式不合法。长度为2-256个字符，不能以http://和https://开头。 | 诊断 |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | 参数Description值不合法 | 诊断 |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | 入参Description无效 | 诊断 |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | 参数Description值不合法 | 诊断 |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | 描述的长度可以是2到256个字符，不能以http://和https://开头。 | 诊断 |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | 指定的设备不存在 | 诊断 |
| 400 | InvalidDhcpOptionsSetId.NotFound | The specified dhcpOptionsSetId does not exist. | DHCP选项集实例不存在，请检查该参数是否正确。 | 诊断 |
| 400 | InvalidDomainNameServers.Malformed | The specified format of DomainNameServers is invalid. | 指定的DomainNameServers参数格式不正确，请检查该参数是否正确。 | 诊断 |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | EIP实例被锁定 | 诊断 |
| InvalidEndTime.Malformed | Specified end time is malformed. | 该结束时间不合法。 | 诊断 | |
| InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | 该结束时间不合法。 | 诊断 | |
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | 网卡类型不能是Slave网卡。 | 诊断 |
| InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | 路由条目配额规则不存在。 | 诊断 | |
| InvalidExternalIp.Malformed | The specified ExternalIp is not a valid IP address. | 该公网IP不合法。 | 诊断 | |
| InvalidExternalIp.NotFound | Specified External Ip address does not found on the VRouter | 该公网IP不存在。 | 诊断 | |
| InvalidExternalPort.Malformed | The specified ExternalPort is not a valid port. | 该公网端口不合法。 | 诊断 | |
| InvalidFilterKey.NotFound | 该过滤器的Key值不合法 | 诊断 | ||
| 404 | InvalidFilterKey.ValueNotSupported | Specified filter key is not supported: Filter.X.key | 该过滤器的Key不支持：Filter.X.key。 | 诊断 |
| InvalidFilterValue | 该过滤器的Value值不合法 | 诊断 | ||
| InvalidForwardEntryId.NotFound | Specified forward entry ID does not exist | 该DNAT条目不存在。 | 诊断 | |
| InvalidForwardTableId.NotFound | Specified forward table does not exist. | 指定的 DNAT 表不存在，请您检查输入参数是否正确。 | 诊断 | |
| InvalidForwardTableId.NotFound | Specified forwardTableId does not exist | 指定的 DNAT 表不存在，请您检查输入参数是否正确。 | 诊断 | |
| InvalidGlobalAccelerationInstanceDescription.Malformed | The specified Description is not valid. | 描述格式不正确。 | 诊断 | |
| InvalidGlobalAccelerationInstanceId.NotFound | The specified GlobalAccelerationInstanceId is not found. | 全球加速实例不存在。 | 诊断 | |
| InvalidGlobalAccelerationInstanceName.Malformed | The specified Name is not valid. | 名称格式不正确。 | 诊断 | |
| InvalidHaVip.NotFound | The specified HaVip does not exist. | 该HAVIP不存在。 | 诊断 | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified region. | 指定的HaVip不在指定的地域中，请您检查选择的地域是否正确。 | 诊断 |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | 该HaVip在VPC中不存在。 | 诊断 |
| 400 | InvalidIAssociatedInstanceType.ValueNotSupported | The specified value of AssociatedInstanceType is not supported. | AssociatedInstanceType的值不合法，请您检查该参数是否正确。 | 诊断 |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | 指定的IDaaS应用实例ID不存在。 | 诊断 |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | 指定的IDaaS实例ID不存在 | 诊断 |
| InvalidIdempotenceParameter.Mismatch | The specified parameters are different from before. | 该client token和之前的不同。 | 诊断 | |
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | 绑定实例不属于您的账号。 | 诊断 |
| 400 | InvalidInstance.NotExist | The bound instance does not exist. | 绑定实例不存在 | 诊断 |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | 指定的实例在当前地域不存在 | 诊断 |
| InvalidInstance.StatusError | The router instance owener error. | 实例状态错误 | 诊断 | |
| 400 | InvalidInstance.StatusError | The router instance status error. | 实例状态错误。 | 诊断 |
| 400 | InvalidInstanceId | vswitch does not exist. | vSwitch实例不存在。 | 诊断 |
| 400 | InvalidInstanceId | Instance does not exist. | 实例不存在。 | 诊断 |
| 400 | InvalidInstanceId | VPC does not exists. | VPC实例不存在 | 诊断 |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | 网卡实例不存在 | 诊断 |
| InvalidInstanceId.NotFound | The specified Instance does not exist in the specified region. | 该实例在该地域内不存在。 | 诊断 | |
| InvalidInstanceId.NotFound | Specified instance does not exist. | 该实例不存在，请您检查填写的实例是否正确。 | 诊断 | |
| InvalidInstanceId.NotFound | The InstanceId provided does not exist in our records. | 该 ECS 实例不存在（实例不在该 VPC 下）。 | 诊断 | |
| 400 | InvalidInstanceId.NotFound | The InstanceId is not found. | 实例InstanceId找不到。 | 诊断 |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | 该实例不存在 | 诊断 |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | InstanceId参数无效 | 诊断 |
| 400 | InvalidInstanceId.NotFound | [%s] | 物理专线实例 [%s] 不存在。 | 诊断 |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | 物理专线实例ID不存在。 | 诊断 |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | 指定的实例ID不存在。 | 诊断 |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | 实例ID没有找到 | 诊断 |
| InvalidInstanceOwner.Error | The router instance owener error. | 路由器不属于您的账号。 | 诊断 | |
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | 实例owner错误 | 诊断 |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | 实例类型没有找到 | 诊断 |
| InvalidInstanceType.ValueNotSupported | The specified value of InstanceType is not supported. | 参数InstanceType的值不合法。 | 诊断 | |
| InvalidInstanId.NotFound | Specified instance does not exist. | 指定的实例不存在，请您检查该实例是否正确。 | 诊断 | |
| InvalidInternalIp.Malformed | The specified InternalIp is not a valid IP address. | 该目标私网IP不合法。 | 诊断 | |
| InvalidInternalPort.Malformed | The specified InternalPort is not a valid port. | 该私网端口不合法。 | 诊断 | |
| InvalidIp.Malformed | The specified ip address is not valid. | 指定的私网 IP 不合法，请您检查该私网IP是否正确。 | 诊断 | |
| InvalidIP.Malformed | Ip malformed. | IP格式不合法。 | 诊断 | |
| InvalidIp.NotInNatgw | The specified Ip not belong to natgateway. | 该 IP 地址不属于该 NAT 网关。 | 诊断 | |
| 400 | InvalidIp.NotSameSubnet | Local gateway ip and peer gateway ip are not in the same subnet. | 本地网关IP地址与对端网关IP地址不在同一个子网内。 | 诊断 |
| 400 | InvalidIpAddress.AlreadyExist | Specified IpAddress is already exist. | 该IP地址已经存在。原因是同一个用户在同一个地域内，IP地址不可重复。 | 诊断 |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | 指定的IP地址已经被其他资源使用 | 诊断 |
| InvalidIPAddress.AlreadyUsed | The specified IPAddress is already used by other resource. | 该IP已经被占用。 | 诊断 | |
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | 传入的IP地址不合法。 | 诊断 |
| InvalidIPAddress.NotAvailable | The specified IPAddress is not available because it is a system reserved IPAddress. | 该IP不可用，该IP是系统预留IP。 | 诊断 | |
| InvalidIPAddress.OutOfRange | The specified IPAddress is out of VSwitch CIDR. | 该私网IP不在交换机网段内。 | 诊断 | |
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | 指定的IP地址超出虚拟交换机（VSwitch）的CIDR段 | 诊断 |
| InvalidIpAddress.WrongFormat | Specified IpAddress is invalid. | 该IP不合法。 | 诊断 | |
| InvalidIpCount.ValueNotSupported | The specified value of IpCount not supported. | 参数IpCount的值不合法。 | 诊断 | |
| InvalidIpCount.ValueNotSupported | Can not remove all ips of the bandwidthPackage. | 不能移除带宽包里所有的 IP 地址。 | 诊断 | |
| InvalidIpInstanceId.NotFound | 指定的弹性公网IP不存在。 | 诊断 | ||
| 400 | InvalidIpInstanceId.NotFound | The specified Eip InstanceId does not exist in our records. | 指定的eip实例不存在。 | 诊断 |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | 指定的Ipv6InstanceId不存在，请确认您的输入是否正确 | 诊断 |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | 参数IPv6 网段不合法 | 诊断 |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | 指定的IPv6CidrBlock未找到。 | 诊断 |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | 指定的IPv6网关未找到。 | 诊断 |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | 指定的IPv6GatewayId未找到。 | 诊断 |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | 未找到指定的Ipv6Instance资源。 | 诊断 |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | 指定的Ipv6AddressId或Ipv6InternetBandwidthId不存在 | 诊断 |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | 指定的IPv6实例未找到。 | 诊断 |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | 指定的IPv6ULACidrBlock格式有误。 | 诊断 |
| InvalidLineOperator.Malformd | The LineOperator provided was invalid. | 参数LineOperator的值不合法。 | 诊断 | |
| 400 | InvalidLoadBalancerId.NotFound | The specified resource of load balancer is not found. | 指定的SLB实例不存在。 | 诊断 |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | 负载均衡ID不存在。 | 诊断 |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | 指定的本端BGP的IP异常 | 诊断 |
| InvalidLocalGatewayIp.Malformed | The specified LocalGatewayIp is not valid. | 该本端网关的IP不合法。 | 诊断 | |
| InvalidLockReason.NotFound | The specified LockReason is not found | 锁定原因未找到。 | 诊断 | |
| InvalidName | The name is not valid | 该名称格式不合法。 | 诊断 | |
| InvalidName.Malformd | The attribute name is illeagl. | 该名称格式不合法。 | 诊断 | |
| 400 | InvalidName.Malformd | The attribute name is illegal. | 属性名称不合法 | 诊断 |
| InvalidName.Malformed | The specified ‘Name’ is not valid. | 该名称格式不合法。 | 诊断 | |
| InvalidName.Malformed | The specified "Name" is not valid. | 该名称格式不合法。 | 诊断 | |
| InvalidName.Malformed | The specified ?Name? is not valid. | 该名称格式不合法。 | 诊断 | |
| 400 | InvalidName.Malformed | The attribute name is illegal. | 该名称格式不合法。 | 诊断 |
| 400 | InvalidName.Malformed | The specified Name is not valid. | 参数Name值不合法 | 诊断 |
| InvalidNatGatewayDescription.MalFormed | NatGateway description is not valid. | 网关描述不合法。 | 诊断 | |
| InvalidNatGatewayId.NotFound | The NatGatewayId not exist. | 指定的 NatGatewayId 不存在，请您检查填写的 NatGatewayId 是否正确。 | 诊断 | |
| InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist in our records. | 指定的 NatGatewayId 不存在，请您检查填写的 NatGatewayId 是否正确。 | 诊断 | |
| InvalidNatGatewayName.MalFormed | NatGateway name is not valid. | 网关名称不合法。 | 诊断 | |
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | 未找到指定的网络Acl | 诊断 |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | Attachment上的弹性网卡不存在。 | 诊断 |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | 指定的网卡类型下一跳实例ID不存在。 | 诊断 |
| 400 | InvalidNetworkInterfaceId.NotFound | The network interface is not found. | 网卡不存在。 | 诊断 |
| InvalidNextHop | Specified nexthop and nexthop list cannot both null. | 下一跳和下一跳列表不能同时为空。 | 诊断 | |
| InvalidNexthop | The Specified nexthop illage. | 该NextHopId不存在。 | 诊断 | |
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | 直通Eni不能作为下一跳 | 诊断 |
| InvalidNextHop.NotFound | Specified next hop does not exist. | 该下一跳地址不存在。 | 诊断 | |
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | 路由指定的下一跳不存在 | 诊断 |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | 作为路由下一跳的网卡业务类型非法。 | 诊断 |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | 路由指向的下一跳不合法 | 诊断 |
| InvalidNextHopId.NotFound | Specified next hop does not exist. | 该下一跳不存在。 | 诊断 | |
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | 路由存在多个下一跳。 | 诊断 |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | 必须指定2~4个路由器接口作为下一跳。 | 诊断 |
| InvalidNextHopType | Specified parameter "NextHopType" is not valid | 该下一跳类型不合法。 | 诊断 | |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | NextHopType 参数非法。 | 诊断 |
| InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | 下一跳类型和下一跳列表不能同时为空。 | 诊断 | |
| InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | 下一跳类型和下一跳列表都为空。 | 诊断 | |
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | 指定绑定的网卡或VM不存在。 | 诊断 |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | 指定的资源实例不存在 | 诊断 |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state | 该边界路由器接口状态不支持该操作。 | 诊断 | |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state. | 该VirutalBorderRouter状态不合法，请检查VirutalBorderRouter状态。 | 诊断 | |
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | 已经开通出云流量服务，去控制台使用它。 | 诊断 |
| InvalidOperation.RouterInterfaceNotDeleted | The specified VirutalBorderRouter still has routerInterface. | 该边界路由器还有关联的路由器接口。 | 诊断 | |
| 400 | InvalidOpposite.NotFound | The opposite does not exist. | 对端不存在。 | 诊断 |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | 对端不存在。 | 诊断 |
| InvalidOppositeRegionId.NotFound | The oppositeRegionId provided does not exist in our records. | 该对端地域不存在。 | 诊断 | |
| InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | 下一跳的路由器接口的对端路由器类型必须为边界路由器。 | 诊断 | |
| 400 | InvalidOppositeRouterType.ValueNotSupported | The specified OppositeRouterType is not valid. | 参数OppositeRouterType的值不合法。 | 诊断 |
| InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | 路由条目与路由器接口本地视频网关VIP不匹配。 | 诊断 | |
| 400 | InvalidParam | The routerEntry input param is illegal. | 修改路由的入参不合法。 | 诊断 |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | 您指定的AvailableZoneId没有获取到对应的集群IP地址。 | 诊断 |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | 无效的云服务类型 | 诊断 |
| InvalidParam.ModifyRouterInterface | Modify routerinterface param invalide | 编辑路由器接口参数不合法。 | 诊断 | |
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | 编辑路由器接口参数不合法。 | 诊断 |
| InvalidParam.NotFound | Parameter must not be null | 参数不能为空。 | 诊断 | |
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | 参数不能为null | 诊断 |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | uid、bid、regionNo、remoteRegionNo和routerId等参数不能为空 | 诊断 |
| InvalidParam.NotNull | The parameter must not be null. | 参数不能为空。 | 诊断 | |
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId 和 natGatewayId 不能同时为空 | 诊断 |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId 和 natGateway不能同时为空 | 诊断 |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId 和 natGatewayId 不能同时为空 | 诊断 |
| 400 | InvalidParameter | The parameter is invalid. | 参数不合法。 | 诊断 |
| InvalidParameter | Specified CIDR block is not valid | 该网段不合法。 | 诊断 | |
| InvalidParameter | Specified CIDR block is not valid in VPC. | 该网段不在VPC网段内。 | 诊断 | |
| InvalidParameter | Specified value of "Bandwidth" is not supported. | 该带宽不合法。 | 诊断 | |
| InvalidParameter | Specified UserCidr Subnet mask is not valid . | 该用户侧网段的子网掩码不合法。 | 诊断 | |
| InvalidParameter | Specified UserCidr invalid format. | 该用户侧网段格式不正确。 | 诊断 | |
| InvalidParameter | The specified parameter is not valid. | 该参数值不合法。 | 诊断 | |
| InvalidParameter | Specified value of "Period" is not valid | 参数Period的值不合法。 | 诊断 | |
| InvalidParameter | The specified parameter is not valid | 该参数值不合法。 | 诊断 | |
| 400 | InvalidParameter | Specified value of InternetChargeType is not valid. | 参数InternetChargeType的值不合法。 | 诊断 |
| InvalidParameter | Specified value of "Bandwidth" is not valid. | 该带宽不合法。 | 诊断 | |
| InvalidParameter.Bandwidth | 指定的带宽无效。 | 诊断 | ||
| InvalidParameter.BandwidthPackage.n.ISP.ValueNotSupport | The specified ISP of BandwidthPackage is not valid. | 该共享带宽包的ISP不合法。 | 诊断 | |
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | 指定的BGP配置不合规范 | 诊断 |
| InvalidParameter.Description.Malformed | The specified Description is not valid. | 该描述不合法。 | 诊断 | |
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | 指定的EniInstanceId不合法。 | 诊断 |
| InvalidParameter.Mismatch | Specified elastic IP address and ECS instance are not in the same region. | 该EIP和ECS实例不在同一个地域内。 | 诊断 | |
| InvalidParameter.Name.Malformed | The specified Name is not valid. | 该名称不合法，请您按照正确的格式书写名称。 | 诊断 | |
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | EIP与绑定实例的region需一致 | 诊断 |
| InvalidParameter.Spec.ValueNotSupported | The specified Spec is not valid. | 该规格不合法。 | 诊断 | |
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | 指定的参数TagKey不合规范。 | 诊断 |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | 指定的参数TagValue不合规范。 | 诊断 |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | 存在多个无效入参。 | 诊断 |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | 指定的VPN连接名称不合规范。 | 诊断 |
| 400 | InvalidParams.AlreadyExists | bgp network already exists | BGP网络已经存在。 | 诊断 |
| InvalidParams.NotFound | instance not found | 实例不存在。 | 诊断 | |
| 400 | InvalidParams.NotFound | vpc instance not found | 该VPC不存在，请您检查输入的VPC是否正确。 | 诊断 |
| InvalidParams.NotNull | parameter must not null. | 参数不能为空。 | 诊断 | |
| InvalidParams.NotNull | invalid peer asn cannot equals aliyun asn:45104 | ASN号码不能和阿里云ASN号码一致。 | 诊断 | |
| 400 | InvalidParams.NotNull | The parameter must not be null, name or description or icmpReplyEnabled | 名称、描述以及icmp代答使能参数不能同时为空。 | 诊断 |
| 400 | InvalidParams.NotNull | params must not null. | 参数不能为空 | 诊断 |
| InvalidParams.PeerIpAddressInUse | peer ip address in use | 对端IP已经被占用。 | 诊断 | |
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | 对等IP地址正在使用，无法创建BGP对等。 | 诊断 |
| InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif | vbr 至少有一个子接口才能创建 BGP 。 | 诊断 | |
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | 请指出PeerIpAddress | 诊断 |
| InvalidPeerAsn.Malformed | invalid peer asn cannot equals aliyun asn:45104 | ASN号码不能和阿里云ASN号码一致。 | 诊断 | |
| InvalidPeerGatewayIp.Malformed | The specified PeerGatewayIp is not valid. | 参数PeerGatewayIp的值不合法。 | 诊断 | |
| 400 | InvalidPeeringSubnetMask.Malformed | The specified PeeringSubnetMask is not valid. | 指定的PeeringSubnetMask不合法，请您检查该参数是否正确。 | 诊断 |
| InvalidPeerIpAddress | multi pconn peer ip can not be null. | 多物理专线的IP地址不能为空。 | 诊断 | |
| InvalidPeerLocation.Malformd | The PeerLocation provided was invalid. | 参数PeerLocation的值不合法。 | 诊断 | |
| InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | 参数Period的值不合法。 | 诊断 | |
| 400 | InvalidPhoneNum.Malformed | The parameter PhoneNum is invalid. | 参数PhoneNum不合法。 | 诊断 |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | 专线绑定的带宽值无效 | 诊断 |
| InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | 物理专线状态不合法。 | 诊断 | |
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | InstanceChargeType参数无效 | 诊断 |
| InvalidPhysicalConnectionId.NotEnabled | The specified PhysicalConnectionId is not in Enabled state. | 该物理专线当前未处于正常状态，请检查物理专线后再创建。 | 诊断 | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId is not found. | 该物理专线ID不存在。 | 诊断 |
| InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId does not belong to user. | 该物理专线不属于您的账号。 | 诊断 | |
| InvalidPhysicalConnectionId.NotFound | The PhysicalConnectionId provided does not exist in our records. | 该物理专线不存在。 | 诊断 | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found. | 没有找到此专线ID对应的物理专线。 | 诊断 |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | 无效的参数PhysicalConnectionId | 诊断 |
| InvalidPhysicalConnectionId.NotMatched | instance id not matched. | 实例ID不匹配。 | 诊断 | |
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | 专线的操作无效 | 诊断 |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | Period参数无效 | 诊断 |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | 专线的端口类型无效 | 诊断 |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | 输入策略信息格式错误。 | 诊断 |
| InvalidPortType.Malformd | The PortType provided was invalid. | 该端口类型不合法。 | 诊断 | |
| 400 | InvalidPortType.NotFound | Specified port type is not found. | 指定规格端口已无库存。 | 诊断 |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | 没有该端口类型 | 诊断 |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | Price参数无效 | 诊断 |
| InvalidProtocal.ValueNotSupported | The specified IpProtocol does not support. | 该协议类型不支持。 | 诊断 | |
| InvalidRedundantPhysicalConnection | redundant physical connection doesn't belong to current user. | 该冗余物理专线不属于您的账号。 | 诊断 | |
| InvalidRedundantPhysicalConnectionId.NotFound | The RedundantPhysicalConnectionId does not found. | 冗余物理专线不存在。 | 诊断 | |
| InvalidRedundantPhysicalConnectionStatus | invalid redundant physical connection status. | 冗余物理专线状态不合法。 | 诊断 | |
| InvalidRegion.NotSupport | The specified region does not support. | 该 RegionId 不支持此操作。 | 诊断 | |
| InvalidRegionId.NotFound | The specified region not found. | 指定的 RegionId 不存在，请您检查此产品在该地域是否可用。 | 诊断 | |
| InvalidRegionId.NotFound | Specified value of "regionId" is not supported. | 指定的 RegionId 不存在，请您检查此产品在该地域是否可用。 | 诊断 | |
| 404 | InvalidRegionId.NotFound | The specified RegionId is not found. | 指定的RegionId不存在，请您检查此产品在该地域是否可用。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist in our records. | 指定的RegionId不存在。 | 诊断 |
| InvalidRegionId.NotFound | The parameter wrong | 参数值错误。 | 诊断 | |
| InvalidRegionId.NotFound | 输入的地域ID不正确。 | 诊断 | ||
| 404 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | 指定的RegionId不存在。请检查该参数是否正确。 | 诊断 |
| 404 | InvalidRegionId.NotFound | The specified RegionId does not exist. | 指定的地域不存在。请检查该参数是否正确。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The specified region is not found. | 指定地域不存在。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in ec region list. | 提供的regionId无效，请检查。 | 诊断 |
| 404 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | 参数错误 | 诊断 |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | 接入认证时未找到指定区域。 | 诊断 |
| 404 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | 指定的RegionId不存在 | 诊断 |
| InvalidRegionId.NotSupport | The RegionId provided does not support in our records. | 输入的地域ID不正确。 | 诊断 | |
| InvalidRegionPair.NotReachable | The specified OppositeRegion is not reachable by ExpressConnect from that region specified by "RegionId" | 输入的地域ID不正确。 | 诊断 | |
| invalidRemovedIpAddresses.NotFound | Some of the specified value of RemovedIpAddress not found in specified BandwidthPackage. | IP列表中的某个IP不在该共享带宽包中，请您检查该IP列表中的IP。 | 诊断 | |
| InvalidRemovedIpAddresses.NotFound | Some of remove ip is not natPublicIp. | 要移除的IP中有不是NAT网关的公网IP。 | 诊断 | |
| 400 | InvalidReservationTime.Malformed | The parameter ReservationTime is invalid. | 参数ReservationTime不合法。 | 诊断 |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | 待绑定的实例已经处于绑定状态了 | 诊断 |
| 400 | InvalidResourceGroupId | The specified ResourceGroupId does not exist. | 资源组ID不存在。 | 诊断 |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | 要指定的资源已经存在flowlog实例 | 诊断 |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | 指定的资源ID不存在。 | 诊断 |
| InvalidRole.ValueNotSupported | The specified Role is not valid. | 指定的 Role 不合法，请您检查该参数是否正确。 | 诊断 | |
| InvalidRouteEntry | Specified routeEntry not exist. | 该路由条目不存在。 | 诊断 | |
| InvalidRouteEntry.Duplicate | The route entry already exist. | 指定的路由条目已存在。 | 诊断 | |
| InvalidRouteEntry.NotFound | Route entry not exists. | 该路由条目不存在，请您检查路由条目是否正确。 | 诊断 | |
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | 指定的路由条目不存在。 | 诊断 |
| 400 | InvalidRouteEntryId.NotFound | The specified routeEntry does not exist. | 指定的路由条目不存在。 | 诊断 |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | 指定的路由条目未找到 | 诊断 |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | 指定路由条目不存在 | 诊断 |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | 无法修改，因为指定的路由条目名称无效 | 诊断 |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | 等价路由需要选择2~4个路由器接口作为路由下一跳。 | 诊断 |
| 404 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | ri不能附加cen | 诊断 |
| InvalidRouterId.NotFound | The specified RouterId does not exist in our recored. | 该 RouterId 不存在。 | 诊断 | |
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | RouterId参数无效 | 诊断 |
| InvalidRouterInterface | invalid router interface. | 该路由器接口不存在。 | 诊断 | |
| InvalidRouterInterfaceChargeType.Malformed | The prepaid routerinterface can not delete. | 无法删除预付费路由器接口。 | 诊断 | |
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | 指定的RouterInterface ChargeType无效。 | 诊断 |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our records. | 指定的路由器接口不存在，请您检查填写的路由器接口是否正确。 | 诊断 | |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our record. | 指定的路由器接口不存在，请您检查填写的路由器接口是否正确。 | 诊断 | |
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | 指定的RouterInterface实例不存在 | 诊断 |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | 指定的RouterInterface Spec无效。 | 诊断 |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | VBR路由表中不存在指定的下一跳 | 诊断 |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid. | 该路由器类型不合法。 | 诊断 | |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid | 该路由器类型不合法。 | 诊断 | |
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | 路由表实例不存在。 | 诊断 |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | 指定的路由表未找到。 | 诊断 |
| InvalidRouteTableId.NotFound | Specified route table does not exist. | 该路由表不存在。 | 诊断 | |
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | 无法找到要删除的附加网段 | 诊断 |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | 指定的附加网段未找到。 | 诊断 |
| InvalidServiceLocation.Mismatch | The specified ServiceLocation does not match the region. | 指定的服务区域与当前地域不匹配。 | 诊断 | |
| InvalidServiceLocation.ValueNotSupported | The specified ServiceLocation is not supported. | 指定的服务区域不支持。 | 诊断 | |
| InvalidSnatEntryId.NotFound | Specified SNAT entry does not exist. | 指定的 SNAT 条目不存在，请您检查填写的 SNAT 条目是否正确。 | 诊断 | |
| InvalidSnatEntryId.NotFound | Specified Snat entry ID does not exist | 指定的 SNAT 条目不存在，请您检查填写的 SNAT 条目是否正确。 | 诊断 | |
| InvalidSnatIp.Malformed | The specified SnatIp is not a valid IP address. | 该公网IP不合法。 | 诊断 | |
| InvalidSnatIp.NotFound | Specified SnatIp does not found on the NAT Gateway | 该公网IP不在NAT网关中。 | 诊断 | |
| InvalidSnatTableId.NotFound | Specified SNAT table does not exist. | 指定的 SNAT 表不存在，请您检查输入参数是否正确。 | 诊断 | |
| InvalidSpec.ValudNotSupported | The specified Spec is not supported. | 该规格不支持该操作，请您更换规格后重试。 | 诊断 | |
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | 路由器接口规格无效 | 诊断 |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | 参数不正确，未找到相应的SSL VPN 服务端的证书。 | 诊断 |
| InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | 开始时间不合法。 | 诊断 | |
| InvalidStartTime.Malformed | Specified start time is malformed. | 开始时间不合法。 | 诊断 | |
| InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | 开始时间不合法。 | 诊断 | |
| InvalidStatus | invalid physical connection status. | 物理专线状态不合法。 | 诊断 | |
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | 只有当路由器接口的状态为Active,Idle或Inactive时该操作才被允许 | 诊断 |
| InvalidStatus.CannotOperate | invalid status cannot operate | 状态不合法，无法执行该操作。 | 诊断 | |
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | 实例处于挂起状态下，不支持操作 | 诊断 |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | 该Eni状态不支持该操作。 | 诊断 |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | nat网关状态不正确。 | 诊断 |
| 400 | InvalidStatus.NotAllow | Bind instance status invalid | 绑定实例状态无效 | 诊断 |
| InvalidStatus.NotAllowed | The virtual border has been associated by physicalConnection. | 边界路由器已经关联了物理专线。 | 诊断 | |
| InvalidStatus.NotAllowed | Invalid virtual border router status. | 当前边界路由器的状态不支持该操作。 | 诊断 | |
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | 解绑EIP操作失败，因为SNAT或DNAT处于非稳定状态 | 诊断 |
| InvalidStatus.StatusNotEnabled | The physical connection status is invalid. | 物理专线状态不支持此操作，请检查物理专线状态。 | 诊断 | |
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | VBR与ECR存在绑定关系，请先解除绑定 | 诊断 |
| 400 | InvalidTagKey | The tag keys are not valid. | 无效的标签索引 | 诊断 |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | 无效的标签键值, 请指定有效的标签键值后重试。 | 诊断 |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | 无效的资源范围 | 诊断 |
| 400 | InvalidTagValue | The tag values are not valid. | 无效的标签值 | 诊断 |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | 当前TransitRouter不支持该操作，请升级TransitRouter后重试。 | 诊断 |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | 指定的隧道CIDR异常 | 诊断 |
| InvalidType.Malformd | The Type provided was invalid. | 参数Type的值不合法。 | 诊断 | |
| InvalidUserCidr.Malformed | Specified UserCird status is wrong | 该UserCidr状态不正确。 | 诊断 | |
| 400 | InvalidUserCidr.Malformed | Specified UserCidr overlapping in of 100.64.0.0/10. | 该UserCidr和100.64.0.0/10重叠。 | 诊断 |
| InvalidUserCidr.Quota | Specified UserCidr number is greater than 3. | Usercidr达到配额限制。 | 诊断 | |
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | 指定传入的用户网段参数数量达到配额限制。 | 诊断 |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter is not found. | 该边界路由器不存在，请您检查输入的边界路由器是否正确。 | 诊断 | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter or PhysicalConnection does not exist in our records. | 该边界路由器或物理专线不存在。 | 诊断 | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter does not exist in our records. | 该边界路由器不存在，请您检查输入的边界路由器是否正确。 | 诊断 | |
| InvalidVbrNetwork | vbr netowrk not exists | 该边界路由器不存在，请您检查输入的边界路由器是否正确。 | 诊断 | |
| InvalidVbrOwnerId.NotFound | The specified VbrOwnerId is not valid. | 参数VbrOwnerId的值不合法。 | 诊断 | |
| InvalidVBRStatus | invalid virtual border router status. | 边界路由器状态不合法。 | 诊断 | |
| InvalidVlanId.Malformed | The specified VlanId is not valid. | 参数VlanId的值不合法。 | 诊断 | |
| InvalidVlanId.Used | The specified VlanId has been used. | 该VLAN已经被占用。 | 诊断 | |
| InvalidVPC.NotFound | vpc not exists. | 专有网络不存在，请您检查输入的专有网络是否正确。 | 诊断 | |
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | 指定vpc不存在。 | 诊断 |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | 指定的VPC实例未找到。 | 诊断 |
| InvalidVpcDiscription.Malformed | Specified VPC description is not valid. | 该VPC描述的格式不符合要求。 | 诊断 | |
| 404 | InvalidVpcId.NotFound | Specified value of VpcId is not found in our record. | 该VPC不存在，请您检查输入的VPC是否正确。 | 诊断 |
| InvalidVpcId.NotFound | Specified VPC does not exist. | 该VPC不存在。 | 诊断 | |
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | 指定的VpcId实例不存在 | 诊断 |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | 指定的VPC实例未找到。 | 诊断 |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | vpcId数量超出限制 | 诊断 |
| InvalidVpcName.Malformed | Specified VPC name is not valid. | 专有网络VPC名称格式不正确，请您修复VPC的格式后再重试。 | 诊断 | |
| InvalidVPCStatus | vpc incorrect status. | 该 VPC 状态非法，请您检查 VPC 状态是否输入正确。 | 诊断 | |
| InvalidVpnConnection.AlreadyExists | Vpn connection already exists. | VPN 连接已经存在，不用再次添加。 | 诊断 | |
| 404 | InvalidVpnConnectionInstanceId.NotFound | The specified vpn connection instance id does not exist. | 指定的VPN连接不存在，请您检查该VPN连接ID是否正确。 | 诊断 |
| 400 | InvalidVpnGatewayInstanceId.NotFound | The specified vpn gateway instance id does not exist. | 指定的 VPN 网关不存在，请您检查 VPN 网关是否正确。 | 诊断 |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | 指定的VPN实例未找到。 | 诊断 |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | VPN网关IP不存在。 | 诊断 |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | 指定的路由条目不存在。 | 诊断 |
| InvalidVRouter.NotFound | vRouter not exists. | 路由器不存在，请您检查输入的路由器是否正确。 | 诊断 | |
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | 输入非法的路由器描述信息。 | 诊断 |
| InvalidVRouterDiscription.Malformed | Specified virtual router description is not valid. | 该路由器描述信息格式不正确。 | 诊断 | |
| InvalidVRouterId.NotFound | Specified virtual router does not exist. | 该路由器不存在，请您检查输入的路由器是否正确。 | 诊断 | |
| InvalidVRouterName.Malformed | Specified virtual router name is not valid. | 该路由器名字格式不正确。 | 诊断 | |
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | 指定的vswitch不存在。 | 诊断 |
| InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | 交换机描述不合法。 | 诊断 | |
| 400 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | 该vSwitch描述信息格式不正确。 | 诊断 |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | 主vSwitch中可用IP数量不足。 | 诊断 |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | 主vSwitch所在可用区不支持。 | 诊断 |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | 虚拟交换机所在可用区不支持创建双隧道VPN，请更换虚拟交换机。 | 诊断 |
| InvalidVSwitchId.NotFound | The specified virtual switch does not exists. | 该交换机不存在，请您检查输入的交换机是否正确。 | 诊断 | |
| InvalidVSwitchId.NotFound | The specified virtual switch not found. | 该 VSwitch 不存在。 | 诊断 | |
| InvalidVSwitchId.NotFound | VSwitch not exist. | 该交换机不存在，请您检查输入的交换机是否正确。 | 诊断 | |
| InvalidVSwitchId.NotFound | The specified VSwitch does not exist in the specified region. | 该交换机在该地域内不存在。 | 诊断 | |
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | 备vSwitch中的可用IP不足。 | 诊断 |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | 备vSwitch所在可用区不支持。 | 诊断 |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | 该地域创建VPN网关时，不允许传入第二个vswitch id。 | 诊断 |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | 主备可用区不能相同。 | 诊断 |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | 创建双隧道VPN时指定的两个虚拟交换机必须要属于不同可用区 | 诊断 |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | 创建双隧道VPN时入参的两个可用区应该不同。 | 诊断 |
| 400 | InvalidVSwitchName.Malformed | Specified virtual switch name is not valid. | 该vSwitch名字格式不正确，请您确认vSwitch名字格式。 | 诊断 |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | 双隧道容灾的可用区暂不支持使用。 | 诊断 |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | 入参的第一个可用区不可用。 | 诊断 |
| InvalidZoneId.NotFound | Specified value of ZoneId is not exists. | 该可用区不存在。 | 诊断 | |
| InvalidZoneId.NotFound | Specified zone does not exist. | 可用区ID不正确。 | 诊断 | |
| InvalidZoneId.NotFound | Can not find ZoneId for allocated ip. | 该IP的可用区不正确。 | 诊断 | |
| INVALID_COMPONENT | 此实例类型不可用于该账户。 | 诊断 | ||
| INVALID_PARAMETER | The parameter invalid. | 参数不合法。 | 诊断 | |
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | 该VPC不存在，请您检查输入的VPC是否正确。 | 诊断 |
| INVALID_WEIGHT_PARAM | Specified value of weight invalid | 该权重不合法。 | 诊断 | |
| 400 | InvokeError | instance quota rule invoke error. | 获取规则数据失败，请稍后再试 | 诊断 |
| 400 | Ip.Allocated | The reserve ip has been allocated. | 已分配保留ip。 | 诊断 |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | 客户端IP池与同一VPC中的其他SSL VPN服务器冲突。 | 诊断 |
| 400 | IpConflict | Client IP pool conflict with local IP range. | 客户端IP池与本地IP范围冲突。 | 诊断 |
| IpInstanceId.AlreadyInBandwidthPackage | 共享带宽包中已有此弹性公网IP实例。 | 诊断 | ||
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId is already added to the bandwidth package. | 该eip实例已经加入带宽包。 | 诊断 |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | 共享带宽包中已有此弹性公网IP实例。 | 诊断 |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | 该eip实例已经不在带宽包内。 | 诊断 |
| IpInstanceId.BizStatusInvalid | 指定的EIP处于停用状态。 | 诊断 | ||
| 400 | IpInstanceId.BizStatusInvalid | The specified EIP BizStatus is incorrect. | 指定的eip商业状态不正确。 | 诊断 |
| IpInstanceId.ChargeType.NotSupport | 指定的弹性公网IP实例是预付费实例。 | 诊断 | ||
| 400 | IpInstanceId.ChargeType.NotSupport | You cannot add subscription EIP instance to the bandwidth package. | 预付费的eip实例不能加到带宽包。 | 诊断 |
| 400 | IpInstanceId.InvalidIpInternetChargeType | You cannot add the hybrid cloud EIP to a pay by traffic bandwidth package. | 混合云模式的eip不允许添加到按流量计费的带宽包。 | 诊断 |
| IpInstanceId.NotBandwidthPackage | 共享带宽包中没有此弹性公网IP实例。 | 诊断 | ||
| IpInstanceId.QuotaExceeded | 此共享带宽包中的IP数已超过限制。 | 诊断 | ||
| 400 | IpInstanceId.QuotaExceeded | The maximum number of EIP that you can add to the bandwidth package is exceeded. | 该带宽包可添加eip个数已经达到上限。 | 诊断 |
| LastTokenProcessing | The last token request is processing. | 正在处理上一条令牌请求，请您稍后再试。 | 诊断 | |
| LimitationExceed.InterfaceNumberOnRouter | Total number of RouterInterfaces on a Router exceeded. | 路由器接口数量已达到配额上限。 | 诊断 | |
| LinkRole.NotSupport | This linkrole is not supported | 这个链接不支持。 | 诊断 | |
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | 运维事件不存在。 | 诊断 |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | 指定的运维事件执行时间要在最迟执行时间之前。 | 诊断 |
| MCMS_VBR_EMPTY | Specified region have no vbr. | 该地域没有 VBR，请您地域是否正确，更换地域后再试。 | 诊断 | |
| MCMS_VPC_EMPTY | Specified region have no vpc. | 该地域没有VPC，请您地域是否正确，更换地域后再试。 | 诊断 | |
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | 参数不匹配，请检查参数 | 诊断 |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | 云盒共享带宽和EIP的可用区不匹配 | 诊断 |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | 云盒共享带宽和EIP的可用区不匹配 | 诊断 |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | EIP安全防护类型与地址池安全防护类型不匹配。 | 诊断 |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | 操作失败，因为指定的弹性网卡和路由表不属于同一个Vpc | 诊断 |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | 传入的高可用虚拟IP与路由表不属于同一个VPC。 | 诊断 |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | Ip和带宽包不匹配，不在指定带宽包中。 | 诊断 |
| 400 | Mismatch.IpAndIsp | The specified IP address does not match the ISP. | 申请指定IP失败，ISP和IP参数不匹配. | 诊断 |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | 操作失败，传入的IPv4网关和路由表不属于同一VPC。 | 诊断 |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | 指定的Ipv6Address和Ipv6Gateway不在同一VPC内 | 诊断 |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | 输入的IpVersion和输入的地址池的IpVersion不一致。 | 诊断 |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s和%s不匹配。 | 诊断 |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | 指定的网络ACL和交换机没有关联关系 | 诊断 |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | 资源所在地域和调用服务的地域不一致。 | 诊断 |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | 当前指定的私网IP和交换机不匹配。 | 诊断 |
| 400 | MissingParam | MissingParameter %s | 参数缺失 | 诊断 |
| 400 | MissingParam | Miss mandatory parameter. | 缺少必要参数。 | 诊断 |
| 400 | MissingParam.%s | The param of %s is missing. | 参数缺失。 | 诊断 |
| 400 | MissingParam.Action | You must specify Action. | 动作参数未指定。 | 诊断 |
| 400 | MissingParam.AliUid | You must specify AliUid. | AliUid缺失。 | 诊断 |
| 400 | MissingParam.AliUid | AliUid is missing. | AliUid参数缺失 | 诊断 |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | 参数aliUid缺失。 | 诊断 |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | 参数AssociatedInstanceId缺失 | 诊断 |
| 400 | MissingParam.Bandwidth | You must specify Bandwidth. | 参数带宽缺失. | 诊断 |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | Bandwidth参数缺失 | 诊断 |
| 400 | MissingParam.bid | The param of bid is missing. | 参数bid缺失。 | 诊断 |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | 参数BindInstanceId缺失。 | 诊断 |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | 给地址池添加地址段失败，因为缺少地址段或掩码参数。 | 诊断 |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | 从IPAM地址池创建资源时，请输入Cidr或CidrMask。 | 诊断 |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | VSwitchCidrReservationMask和VSwitchCidrReservationCidr不能同时为空，请指定其中一个重试。 | 诊断 |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | 计划施工时间必须填写。 | 诊断 |
| 400 | MissingParam.context | The param of context is missing. | 参数context缺失。 | 诊断 |
| 400 | MissingParam.CustomerGatewayAsn | Asn of customer gateway is mandatory when BGP is enabled. | 开启BGP时，客户网关的自治系统号不可以为空。 | 诊断 |
| 400 | MissingParam.Description | You must specify Description. | 实例的描述是必要的。 | 诊断 |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | 目的CIDR未指定。 | 诊断 |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | 缺少 EnableIpv6 参数 | 诊断 |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | 参数EnableIpv6缺失。 | 诊断 |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | 筛选条件实例id参数未指定。 | 诊断 |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | FullnatTableId和natGatewayId不能同时为空 | 诊断 |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | 启动双因子认证时请输入IDaaSApplicationId参数。 | 诊断 |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | 当开启双因子认证时，IDaaS实例ID是必填的参数 | 诊断 |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | 启动双因子认证时请输入IDaaSRegionId参数。 | 诊断 |
| 400 | MissingParam.InstanceId | You must specify InstanceId. | Missing param of InstanceId. | 诊断 |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | InstanceId参数缺失 | 诊断 |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | 物理专线实例ID必须填写。 | 诊断 |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | InstanceId不可以为空 | 诊断 |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | 参数缺失，Ipv6CidrBlock是必选参数 | 诊断 |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | Ipv6InstanceId未指定 | 诊断 |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | 参数IpVersion缺失。 | 诊断 |
| 400 | MissingParam.Name | You must specify Name. | 实例名缺失。 | 诊断 |
| 400 | MissingParam.NatGatewayId | You must specify NatGatewayId. | 参数NatGatewayId必填. | 诊断 |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | 为开启了私网链接服务的NAT创建Snat规则时需要指定NetworkInterfaceId参数。 | 诊断 |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | 修改路由条目下一跳缺失待修改路由条目下一跳实例ID信息。 | 诊断 |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | 修改路由条目下一跳缺失待修改路由条目下一跳实例类型信息。 | 诊断 |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | 缺少必须传入的参数。 | 诊断 |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | 缺少参数对端ip地址 | 诊断 |
| 400 | MissingParam.PhysicalConnectionId | You must specify PhysicalConnectionId. | PhysicalConnectionId缺失。 | 诊断 |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | PhysicalConnectionId参数缺失 | 诊断 |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | 施工工程师信息必须填写。 | 诊断 |
| 400 | MissingParam.Priority | You must specify Priority. | 优先级参数未指定。 | 诊断 |
| 400 | MissingParam.Protocol | You must specify Protocol. | 协议参数未指定。 | 诊断 |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | 参数PublicIpAddressPoolId缺失。 | 诊断 |
| 400 | MissingParam.RegionNo | You must specify RegionNo. | RegionNo缺失。 | 诊断 |
| 400 | MissingParam.RegionNo | RegionNo is missing. | RegionNo参数缺失 | 诊断 |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | 当创建国密VPN连接时，对端ID是必填参数。 | 诊断 |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | ReservedCidr或ReservedCidrMask必须指定其中一个 | 诊断 |
| 400 | MissingParam.Resource | Missing parameter Resource. | 参数Resource缺失 | 诊断 |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | 参数ResourceType缺失 | 诊断 |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | 参数RouteEntries缺失 | 诊断 |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | 缺少必须参数 | 诊断 |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | 请求缺少必要参数。您必须提供 RouteEntryId，或者同时提供RouteTableId和DestinationCidrBlock。 | 诊断 |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | 流量镜像筛选规则实例id参数未指定。 | 诊断 |
| 400 | MissingParam.Rules | You must specify rule instance ID. | 流量镜像筛选规则实例id未指定。 | 诊断 |
| 400 | MissingParam.ScheduledMigrationParam | You must specify the parameters that are required for the scheduled migration. | NAT网关预约迁移的必要参数缺失。 | 诊断 |
| 400 | MissingParam.SecondaryCidrBlockOrIpv6CidrBlock | Either SecondaryCidrBlock or Ipv6CidrBlock must be specified. | 缺少必填参数附加网段或者IPv6网段。 | 诊断 |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | SecondaryCidrMask参数需要输入。 | 诊断 |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | 不通过 IPAM 地址池为 VPC 添加附加网段时，参数 SecondaryCidrBlock 和参数 Ipv6CidrBlock 必须输入一个且不能都输入。 | 诊断 |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | 为公网NAT或私网NAT创建Snat规则时需要指定SnatIp参数。 | 诊断 |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | 流量镜像源实例id参数未指定。 | 诊断 |
| 400 | MissingParam.Spec | The param of Spec is missing. | Spec参数缺失 | 诊断 |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | 源CIDR未指定。 | 诊断 |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | Tags参数缺失 | 诊断 |
| 400 | MissingParam.Tags | The Tags parameter is required. | Tags 参数是必需的。 | 诊断 |
| 400 | MissingParam.TimePoint | You must specify TimePoint. | 参数TimePoint必填. | 诊断 |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | TrafficAnalyzerId与ProjectName和LogStoreName 参数都未传入。 | 诊断 |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | 流量镜像筛选规则未指定。 | 诊断 |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | 缺少参数 VBR 倒换组实例 ID 或者 VBR 实例 ID。 | 诊断 |
| 400 | MissingParam.VbrId | You must specify VbrId. | vbrId缺失 | 诊断 |
| 400 | MissingParam.VpcId | You must specify VpcId. | 缺少必填参数VpcId。 | 诊断 |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | 参数缺失，vpcId是必选参数 | 诊断 |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | 参数VSwitchId缺失 | 诊断 |
| 400 | MissingParam.Zones | The Zones parameter is required. | 参数Zones必填 | 诊断 |
| MissingParameter | Missing mandatory parameter | 缺少必要参数，请您检查必填参数是否都已填后再进行操作。 | 诊断 | |
| MissingParameter | Either nexthopId or nextHopList should be specified | 必须填写 nexthopId 或 nextHopList。 | 诊断 | |
| MissingParameter | The input parameter is mandatory for processing this request is not supplied. | 缺少必要参数,请您检查必填参数是否都已填后再进行操作。 | 诊断 | |
| MissingParameter | The input parameter 'PhysicalConnectionId' that is mandatory for processing this request is not supplied. | 必须指定参数PhysicalConnectionId。 | 诊断 | |
| MissingParameter | The input parameter 'VlanId' that is mandatory for processing this request is not supplied. | 必须指定参数VlanId。 | 诊断 | |
| MissingParameter | The input parameter 'LocalGatewayIp' that is mandatory for processing this request is not supplied. | 必须指定参数LocalGatewayIp。 | 诊断 | |
| MissingParameter | The input parameter 'PeerGatewayIp' that is mandatory for processing this request is not supplied. | 必须指定参数PeerGatewayIp。 | 诊断 | |
| MissingParameter | The input parameter 'PeeringSubnetMask' that is mandatory for processing this request is not supplied. | 必须指定参数PeeringSubnetMask。 | 诊断 | |
| MissingParameter | LocalGatewayIp | 必须指定参数LocalGatewayIp。 | 诊断 | |
| MissingParameter | Miss mandatory parameter. | 缺少必要参数，请您检查必填参数是否都已填后再进行操作。 | 诊断 | |
| MissingParameter | 缺少必要参数,请您检查必填参数是否都已填后再进行操作。 | 诊断 | ||
| MissingParameter | The input parameter OwnerId | 必填参数未指定。 | 诊断 | |
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | 参数缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能为空 | 诊断 |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | 端口类型和带宽值不可同时为空。 | 诊断 |
| MissingParameter.BandwidthPackage | only support one BandwidthPackage be created with NatGateway. | 必须指定一个共享带宽包。 | 诊断 | |
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | 启动双因子认证时请输入IDaaSInstanceId参数。 | 诊断 |
| 400 | MissingParameter.TagKey | The input parameter TagKey that is mandatory for processing this request is not supplied. | 缺少参数TagKey | 诊断 |
| 400 | MissingParameter.TagValue | The input parameter TagValue that is mandatory for processing this request is not supplied. | 缺少参数TagValue | 诊断 |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | 开启BGP时，隧道CIDR参数是必填项 | 诊断 |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | 双隧道VPN在创建隧道时，必填参数缺失。 | 诊断 |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | 修改VPN连接参数失败，在使用IkeV1协议的同时配置了多网端。 | 诊断 |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | 单vbr多pconn场景的vbr不支持故障演练。 | 诊断 |
| NATGATEWAY_FINANCIALLOCKED | 指定的NAT网关已过期。 | 诊断 | ||
| NATGW_MODIFY_SPEC_SAME | The specified Spec is same with now. | 该规格和当前规格一样。 | 诊断 | |
| 400 | NATGW_NOT_EXIST | The specified NAT gateway does not exist. | 该 NAT 网关不存在。 | 诊断 |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | Network Acl具有绑定。 | 诊断 |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | 特殊网络Acl正在修改中。 | 诊断 |
| NOCARD | 用户没有绑卡 | 诊断 | ||
| 400 | NoPermission.CreateServiceLinkedRole | You are not authorized to create service linked role. | 您没有权限创建SLR。 | 诊断 |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | 指定的带宽包不存在。 | 诊断 |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | 路由器接口为用户侧接口，不可激活。 | 诊断 |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | 该路由器接口不是用于连接的虚拟网络接口。 | 诊断 |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | IPsec连接中指定的认证算法不支持 | 诊断 |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | IPsec连接中指定的Pfs参数不支持 | 诊断 |
| NOT_ALLOW_USE_SOURCECIDR | The User not in nat_scope_unlimited white list. Cannot use SourceCidr param. | 内网IP超出VPC网段范围。 | 诊断 | |
| NO_REAL_NAME_AUTHENTICATION | 账户尚未完成实名认证。 | 诊断 | ||
| 400 | nsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not support to enable security protection. | VPC NAT网关不支持打开安全防护。 | 诊断 |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | Period参数无效 | 诊断 |
| 409 | OperationConflict | Request was denied due to conflict with a previos request. | 请求冲突，请稍后重试。 | 诊断 |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | 对该实例的操作过于频繁，请稍后重试。 | 诊断 |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | 请求冲突，请稍后重试。 | 诊断 |
| OperationDenied | Eip of default vpc not allow this operation | 默认专有网络的EIP不支持该操作。 | 诊断 | |
| OperationDenied | The operation is not supported in this status. | 当前状态无法执行该操作。 | 诊断 | |
| OperationDenied | The snapshot creation for the specified disk is not finished yet. | 指定磁盘的快照创建尚未结束。 | 诊断 | |
| OperationDenied | Specified operation is denied as route entry type is system. | 无法执行该操作，因为路由条目是系统路由。 | 诊断 | |
| OperationDenied | Specified instance is not in VPC. | 该实例在VPC中不存在。 | 诊断 | |
| OperationDenied | The user cannot allow to create natgw | 不允许删除系统生成的路由项。 | 诊断 | |
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | 您的账户类型不支持此次交易 | 诊断 |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | 您指定的资源已经创建了采集全部场景的流量的流日志实例，不能再创建仅采集部分场景的流日志实例。 | 诊断 |
| 400 | OperationDenied.AlreadyNewest | The operation is denied because the firmware version of the VPN gateway is already the latest. | 当前VPN网关的固件版本已经是最新了，不能再次升级。 | 诊断 |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | 交换机不允许绑定网关路由表。 | 诊断 |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | 操作被拒绝，原因是可用的CIDR资源不足。 | 诊断 |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | 不允许金融云帐号和普通帐号间创建vpc互联。 | 诊断 |
| 400 | OperationDenied.CenAttached | The operation is not allowed because the VPC is attached to CEN. | 指定操作被禁止，因为VPC关联了CEN。 | 诊断 |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | 不支持在路由表中创建路由指向此类型的Cen。 | 诊断 |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | 操作被拒绝，原因是输入的CIDR在不合法的CIDR范围内。 | 诊断 |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | 操作被拒绝，原因是CIDR在IPAM地址池中不可用。 | 诊断 |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | 当前操作不支持传统型负载均衡实例 | 诊断 |
| 400 | OperationDenied.CloudBoxResourceExist | The operation is not allowed because there are resources related to the cloud box in VPC. | 指定操作被禁止，因为VPC中存在云盒相关的资源。 | 诊断 |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | 指定操作被禁止，因为只有自定义路由表能够添加下一跳指向云盒类型VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | 指定操作不允许，因为路由表存在下一跳指向云盒VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | 指定操作被禁止，因为虚拟交换机是云盒类型的。 | 诊断 |
| 400 | OperationDenied.CloudBoxVSwitchExist | The operation is not allowed because a cloud box type vSwitch exists in VPC. | 指定操作被禁止，因为VPC中存在云盒类型的虚拟交换机。 | 诊断 |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | 指定操作被禁止，因为可用区是云盒类型的。 | 诊断 |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | 已发布路由不支持创建主备路由或负载均衡路由。 | 诊断 |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | 无权限创建共享专线，请联系商务经理。 | 诊断 |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | 无权限创建共享专线，请联系商务经理。 | 诊断 |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | 无法手动删除指向GatewayEndpoint的路由。 | 诊断 |
| 400 | OperationDenied.DeleteManagedRouteEntry | The operation is not allowed because of route entry is managed. | 无法删除被云服务托管的路由。 | 诊断 |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | 无法删除共享PrefixList | 诊断 |
| 400 | OperationDenied.DirectEipExist | The operation is not allowed because of existing directEip. | 操作不允许，该VPC下存在直通EIP或增强型NAT网关 | 诊断 |
| 400 | OperationDenied.DnatEntryStatusInvalid | The NAT gateway has DNAT entry in invalid status. | NAT网关配置的DNAT状态无效。 | 诊断 |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | 网卡不能同时作为流量镜像会话的源和目的。 | 诊断 |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | ECS实例不支持流量镜像功能。 | 诊断 |
| 400 | OperationDenied.EipBondTypeIsAlreadyNAT | The EIP bond type is already NAT type. | EIP绑定类型已经是NAT类型。 | 诊断 |
| 400 | OperationDenied.EipStatusInvalid | The NAT gateway has EIP in invalid status. | NAT网关绑定的EIP状态无效。 | 诊断 |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | 不允许创建ipv4网关，因为存在直通eip | 诊断 |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | 操作失败，因为VPC中存在ipv6公网IP | 诊断 |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | 该VPC内存在低版本的路由表，请提交工单处理。 | 诊断 |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | 操作被拒绝，原因是存在路由表1.0。 | 诊断 |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | 流日志投递地址无效，无法启动该流日志。 | 诊断 |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | 指定的网卡未绑定任何ECS实例。 | 诊断 |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | 操作不允许，因为指定的Ipv4网关处于绑定状态 | 诊断 |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | 网关与路由表不在同一个VPC内不允许关联 | 诊断 |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | 您指定的网关路由表和网关实例不属于同一个VPC，请检查您的输入是否正确 | 诊断 |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | 无法删除指定的路由表，因为路由表绑定了网关 | 诊断 |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | 网关路由表中不支持创建指向此实例类型的路由条目。 | 诊断 |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | 修改local类型的路由下一跳时，传入了不支持的新的下一跳类型。 | 诊断 |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | 操作失败，因为指定Vpc中存在Anycast弹性公网IP | 诊断 |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | 操作失败由于实例关联CEN | 诊断 |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | 在修改FlowLog实例的投递目的或者启停NIS流量分析时，指定了不被允许的投递类型。 | 诊断 |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | 流量镜像源不支持所输入的托管弹性网卡类型。 | 诊断 |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | 流量镜像目的不支持所输入的托管弹性网卡类型。 | 诊断 |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | 操作被拒绝，因为无法从不具备地域属性的地址池中创建VPC或为VPC添加附加网段。 | 诊断 |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | 申请失败，该IP归属其他用户 | 诊断 |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | EIP绑定操作失败，因为此VPC下存在Ipv4网关 | 诊断 |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | 操作不允许，因为指定的ipv4网关未激活 | 诊断 |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | 不允许在自定义路由表上创建IPv6路由。 | 诊断 |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | 当前ISP不支持创建增强型安全防护地址池。 | 诊断 |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | 此地域暂不支持L2 EIP绑定IP地址。 | 诊断 |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | 共享物理专线不允许施工。 | 诊断 |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | 端口的LOA状态不允许完工报竣或者线路运维 | 诊断 |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | Local路由只能修改下一跳属性。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | 您所修改的Local路由所属的交换机正与当前路由表绑定，禁止修改其下一跳。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | 禁止修改系统路由表中的Local路由。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | 存在local类型的路由下一跳被修改了。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | 修改自定义路由表Local路由的下一跳时，该Local路由的目的网段恰好和路由表绑定的某个交换机的Cidr相等。 | 诊断 |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | 输入的掩码或CIDR的掩码不在允许的范围内。 | 诊断 |
| 400 | OperationDenied.MissingAsn | The autonomous system number of the customer gateway is mandatory when BGP authentication key is specified. | 当指定了用户网关的BGP验证密钥时，必须指定自治系统号。 | 诊断 |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | 默认DHCP选项集不允许修改。 | 诊断 |
| 400 | OperationDenied.ModifyManagedRouteEntry | The operation is not allowed because of route entry is managed. | 无法修改被托管的路由。 | 诊断 |
| 400 | OperationDenied.NatGatewayStatusInvalid | The NAT gateway status is invalid. | NAT网关的状态无效。 | 诊断 |
| 400 | OperationDenied.NatgwExist | The operation is not allowed because the NAT gateway exists in VPC. | 指定操作被禁止，因为VPC中创建有NAT网关。 | 诊断 |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | 删除失败，需要物理端口的用户去删除。 | 诊断 |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | 删除失败，需要共享端口的用户去删除。 | 诊断 |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | 该路由条目已经发布到其他组件，指定的下一跳类型不支持路由发布。 | 诊断 |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | 需要修改的目标路由条目下一跳已存在。 | 诊断 |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | 制定操作被禁止，因为下一跳未发生改变 | 诊断 |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | 不支持指定该资源类型为下一跳 | 诊断 |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | 不允许创建下一跳为此类型的路由。 | 诊断 |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | FlowLog的采样间隔大于NIS流量分析器的采样间隔。 | 诊断 |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | 指定的NIS流量分析器处于非开启状态。 | 诊断 |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | 指定的NIS流量分析器不存在。 | 诊断 |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | 当前虚拟交换机下的可用私网IP不足 | 诊断 |
| 400 | OperationDenied.NoEnoughAvailablePrivateIps | The available private Ip number is not enough in your subnet. | 子网中可用的私网IP不够。 | 诊断 |
| 400 | OperationDenied.NormalNatExist | The operation is not allowed because of existing normalNat. | 操作不允许，该VPC下存在普通型NAT网关 | 诊断 |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | 实例未加载到CEN，该操作禁止。 | 诊断 |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | 无法创建DDoS防护（增强版）Eip，因为没有购买DDoS原生防护服务 | 诊断 |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | 该公网IP地址池实例是共享资源，不允许修改。 | 诊断 |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | 操作共享资源导致操作失败 | 诊断 |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | 指定操作不允许，因为路由表存在下一跳指向非本云盒VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.OtherSubnetCreating | The operation is not allowed because a subnet is being created. | 指定操作被禁止, 因为有其他虚拟子网正在创建 | 诊断 |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | 无法删除当前虚拟交换机（vSwitch），因为其他子网正在操作中。 | 诊断 |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | 当前资源无法执行此操作。请联系值班人员获取帮助。 | 诊断 |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | 未开启出云流量费，该操作禁止。 | 诊断 |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | 预付费实例不再支持购买。 | 诊断 |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | NAT网关未使能私网连接。 | 诊断 |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | 不支持查询已接入云数据传输的共享带宽实例 | 诊断 |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | 删除cidr数量超过，prefixList拥有的数量 | 诊断 |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | 操作被拒绝，因为未在地址池所在地域调用请求。 | 诊断 |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | 无法删除Ipv4网关，因为存在到Ipv4网关的路由 | 诊断 |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | 指定操作被禁止，因为路由器接口来自不同的可用区。 | 诊断 |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface 不支持 IPv6。 | 诊断 |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | routerinterface不支持ipv6 | 诊断 |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | 指定操作被禁止，因为路由器接口指向不同的VPC。 | 诊断 |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | 指定操作被禁止，因为路由表绑定到了非云盒类型的vSwitch上，不能添加指向云盒VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | 操作不允许，因为路由表类型不对 | 诊断 |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | 您指定的网关路由表实例不是边界网关路由表，请检查您的输入是否正确 | 诊断 |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | 指定路由表类型不允许创建路由条目 | 诊断 |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | 指定的SLB不属于任何一个VPC。 | 诊断 |
| 400 | OperationDenied.SnatEntryStatusInvalid | The NAT gateway has SNAT entry in invalid status. | NAT网关配置的SNAT条目状态无效。 | 诊断 |
| 400 | OperationDenied.SubnetRouteV1Exist | The operation is not allowed because of existing subnetRouteV1. | 操作不允许，该VPC下子网路由不符合规格 | 诊断 |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | 无法将绑定路由表直接切换为系统路由表。 | 诊断 |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | 无法操作系统PrefixList | 诊断 |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | 不允许操作系统PrefixList | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bond弹性网卡不支持作为镜像目的。 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | 网关型负载均衡终端节点不支持作为流量镜像目的。 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | 流量镜像目的不支持该流量镜像源的类型 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | 当前流量镜像会话的目的类型不支持完整报文镜像功能。 | 诊断 |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | VirtualPhysicalConnection没有权限或处于欠费状态，该操作不被允许 | 诊断 |
| OperationDenied.TooManyDataQueried | Specified operation is denied as too many data to return. | 一次查询返回的数据量过多。 | 诊断 | |
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | 流量镜像当前不支持完整报文镜像功能，TrafficMirrorSourceTruncateMode只能设置为0，即默认模式。 | 诊断 |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | Tr Attachment未开启Ipv6能力 | 诊断 |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | 此操作不被允许，用户不在白名单。 | 诊断 |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | 由于您的账户存在未生效的变配订单，当前操作不被允许 | 诊断 |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | 操作被拒绝，因为只有系统路由表支持发布路由 | 诊断 |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | 此NAT网关的EIP绑定类型不支持此操作。 | 诊断 |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | 流量镜像源中存在NAT网关网卡时，流量镜像目的必须为SLB类型 | 诊断 |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | 操作被拒绝，因为路由发布目标的类型当前不支持。 | 诊断 |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | 修改网关路由条目失败，下一跳必须首先修改为local路由，才能自定义下一跳 | 诊断 |
| 400 | OperationDenied.UseGatewayRouteEntryQueryInterface | Use listGatewayRouteTableEntries to describe gateway route entries. | 查询网关路由表路由条目，请使用listGatewayRouteTableEntries接口。 | 诊断 |
| 400 | OperationDenied.VBRAssociateVPconn | The operation is not allowed because of VBRAssociateVPconn. | VBR不允许绑定Vpconn | 诊断 |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | 由于边界路由器正处于加载或者卸载专线网关过程中，当前操作无法执行，请您稍等后重试。 | 诊断 |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | 指定操作被禁止，因为添加的路由条目下一跳是对端为VBR类型的RI,不能处于空闲状态。 | 诊断 |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | 指定操作被禁止，因为路由表绑定到了一个云盒vSwitch上，不能添加指向其他云盒VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | 不允许新建IPv4网关，因为VPC已经存在IPv4网关 | 诊断 |
| 404 | OperationDenied.VpcIpv4GatewayEnabled | The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway. | 不允许操作，因为NAT网关的VPC已经开启IPv4网关 | 诊断 |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | 由于该VPC未使能IPV6能力，操作被拒绝。 | 诊断 |
| 400 | OperationDenied.VPconn | The operation is not allowed because of VPconn. | Vpconn类型不支持此操作。 | 诊断 |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | 共享专线不允许为其他账号创建VBR | 诊断 |
| 400 | OperationDenied.VpconnVBRAssociatePconn | The operation is not allowed because of VpconnVBRAssociatePconn. | 操作失败，因为不允许Vpconn的VBR绑定Pconn | 诊断 |
| 400 | OperationDenied.VpcPeerExist | The operation is not allowed because the VPC peer exists. | 指定操作被禁止，因为VPC存在对等连接。 | 诊断 |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because the VpcPeer exists. | 指定操作被禁止，因为VPC内存在VPC对等连接。 | 诊断 |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because of VpcPeerExists. | 指定操作被禁止，因为VPC中存在VPC对等连接实例。 | 诊断 |
| 400 | OperationDenied.VpnConfiguring | The associated VPN gateway is being configured. You cannot update the attributes of the customer gateway. | 关联的VPN网关正在配置中，无法修改用户网关的相关配置。 | 诊断 |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | 不允许新建IPv4网关，因为VPC已经存在VPN网关 | 诊断 |
| 400 | OperationDenied.VpnFinancialLocked | The associated VPN gateway is financially locked. You cannot update the attributes of the customer gateway. | 关联的VPN网关已经欠费锁定，无法修改用户网关的相关配置。 | 诊断 |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | 访问设备已禁用，无法创建vbr。 | 诊断 |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | VPC NAT生成隧道ID失败, 请稍后重试 | 诊断 |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | Attachment上不存在可用的弹性网卡。 | 诊断 |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | 存在EIP正在加入共享带宽，不允许删除 | 诊断 |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | 指定的地址已被分配 | 诊断 |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | 指定的IP地址不在vSwitch的网段内，请按API文档参数说明修改后重试。 | 诊断 |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | 此操作后添加 VPC 路由失败。 | 诊断 |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_flowlog_public 无集团上云商品标签，不允许集团内部用户购买。 | 诊断 |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_trafficmirror_public 无集团上云商品标签，不允许集团内部用户购买。 | 诊断 |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | 连续EIP库存不足。 | 诊断 |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | 前端端口分配失败 | 诊断 |
| 400 | OperationFailed.AllocateUnfamiliarIp | The operation failed because only IP addresses used within the last seven days can be allocated. | 指定EIP申请只允许申请7天内使用过的IP | 诊断 |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | 指定的预留网段不能包含已被使用的IP地址。 | 诊断 |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | 当前vpn实例已与同类证书绑定。 | 诊断 |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | 操作失败. 与其他条目有冲突, 存在任何端口或任何协议类型. | 诊断 |
| 400 | OperationFailed.AssociationExist | The association already exists. | 由于当前资源处于绑定中操作失败 | 诊断 |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | 由于存在绑定操作失败，操作失败。 | 诊断 |
| 400 | OperationFailed.AttachmentExist | The current VPC is already attached to a DHCP options set. | 当前VPC已经绑定DHCP选项集实例，不允许再绑定其他实例。 | 诊断 |
| 400 | OperationFailed.AttachmentNotExist | The current VPC is not attahced to a DHCP options set. | 当前VPC没有绑定DHCP选项集实例，不允许替换。 | 诊断 |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | 由于指定的Bandwidth超过上限，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.BandwidthOrVlanIdEmpty | The specified VBR bandwidth or VlanId is empty. | 选择的VBR的带宽或者VlanId为空 | 诊断 |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | 共享带宽包中仍存在EIP，无法删除 | 诊断 |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | 您的基本信息尚未完成，请先完成信息填写。 | 诊断 |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | 您未完善个人基本信息，请完善信息后重新操作。 | 诊断 |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | 倒换组中 VBR 的 BGP 组 AS 号必须是相互一致的。 | 诊断 |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | 当前VBR已经创建的BGP邻居与ECR配置冲突，请删除BGP配置后重试。 | 诊断 |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | 架构不支持BGP能力（单隧道bonding架构vpn网关） | 诊断 |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | 当前资源与其它账号 VPC 或 CEN 绑定失败，请核对是否有相关权限后重试。 | 诊断 |
| 400 | OperationFailed.CanNotUseEipInDnat | Operation failed because the EIP cannot be used to create a forward entry. | 操作失败，EIP不能用于DNAT创建。 | 诊断 |
| 400 | OperationFailed.CenLevelNotSupport | When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP. | 当VPN网关所属VPC加入到的云企业网且开启了路由同步时，VPN网关不能开启BGP。 | 诊断 |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | 路由Cidr与已存在的前缀列表路由冲突。 | 诊断 |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | 用户传入的cidr数量超过cidrMaxCount | 诊断 |
| 400 | OperationFailed.CidrInUse | Operation failed because cidr is in use. | 网段正在使用中。 | 诊断 |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | 操作失败，CIDR地址段正在被使用。 | 诊断 |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | 指定的vswitch已没有足够的cidr分配出CidrReservation。 | 诊断 |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | 指定密钥不为空，无法清空密钥。 | 诊断 |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | 无效的商品代号，请修改后重试。 | 诊断 |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | NAT会话日志投递规则配置失败. | 诊断 |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | 由于内部服务错误引起配置会话日志失败. | 诊断 |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | 操作失败，新增CidrBlock与路由冲突。 | 诊断 |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | 存在禁止下单的标签，请联系您的分销商处理。 | 诊断 |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | 由于在Vpc Cidr中创建NatIpCidr，操作失败。 | 诊断 |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | 由于创建NatIpCidr不在UserCidr中，操作失败。 | 诊断 |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | 您的账户可用额度小于0，请先充值后再尝试购买。 | 诊断 |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | 操作失败，因为无法删除默认的NatIP。 | 诊断 |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | 操作失败，因为无法删除默认NatIPCidr。 | 诊断 |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | 操作失败，默认VPC已存在。 | 诊断 |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | 操作失败，默认VPC不存在。 | 诊断 |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | 当前可用区已经存在默认交换机。 | 诊断 |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | 查询cen路由异常。 | 诊断 |
| 400 | OperationFailed.DistibuteLock | The resource is locked and cannot be operated. | 资源已经被锁定，不允许操作。 | 诊断 |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | 操作被其他请求加锁； | 诊断 |
| 400 | OperationFailed.DnatInMiddleStatus | Operation failed because the status of the DNAT entry associated with the NAT gateway is abnormal. | 操作失败因为NAT网关的DNAT规则状态异常。 | 诊断 |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | dnat单ip限制端口段映射数必须小于64 | 诊断 |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | dnat单ip端口段映射数超过限制值 | 诊断 |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | 端口段数量超限。 | 诊断 |
| 400 | OperationFailed.DnatQuotaExceed | Operation failed because the maximum number of forward entry is exceeded. | 操作失败因为DNAT条目数量过多。 | 诊断 |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | 操作失败，该ri的对端类型对于ECMP是无效的。 | 诊断 |
| 400 | OperationFailed.EcsMetricNotEnabled | The feature is not enabled for enhanced NAT gateway. | 增强型NAT网关未开启该功能. | 诊断 |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | 绑定操作失败，因为ECS正在迁移。 | 诊断 |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | ECS弹性网卡配额不满足要求. | 诊断 |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | Eip不能同时以NAT模式和多EIP网卡可见模式绑定ENI. | 诊断 |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | 由于存在Eip绑定在实例上，删除实例失败。 | 诊断 |
| 400 | OperationFailed.EipInMiddleStatus | Operation failed because the status of EIP associated with the specified NAT gateway is abnormal. | 操作失败因为绑定在此NAT网关上的EIP状态异常。 | 诊断 |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | 操作失败，因为EIP实例状态无效。 | 诊断 |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | 该地域不属于该服务接入域名管理 | 诊断 |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | 当前可用区NAT网关未开服, 或底层资源库存不足。 | 诊断 |
| 400 | OperationFailed.EnhancedInventoryNotEnough | The enhanced NAT gateway inventory is insufficient in the specified zone. | 当前可用区增强NAT网关库存不足。 | 诊断 |
| 400 | OperationFailed.EnhancedQuotaExceed | Operation failed because the maximum number of enhanced NAT gateways in the same VPC is exceeded. | 操作失败因为当前VPC下的增强型NAT网关数量超过限制。 | 诊断 |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | 当前vpc下创建增强型nat网关配额超限 | 诊断 |
| 400 | OperationFailed.EnhancedRegion | Operation failed because enhanced NAT gateways are not available for sale in the specified region. | 操作失败因为当前地域未开启增强型NAT网关售卖。 | 诊断 |
| 400 | OperationFailed.EnhancedUserIsUnAuthorized | Operation failed because the user is not authorized to create an enhanced NAT gateway. | 操作失败因为用户未授权创建增强型NAT网关。 | 诊断 |
| 400 | OperationFailed.EniTypeNotSupport | Operation failed because the ENI type is not supported. | 弹性辅助网卡的类型不支持当前操作 | 诊断 |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | 您已达到最大购买量。 | 诊断 |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | 由于IPv6前缀中存在IPv6已被使用，操作失败 | 诊断 |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | 获取高速通道资源状态信息失败，请核对资源信息后再次查询。 | 诊断 |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | 操作失败，只有自定义路由条目才支持通过路由条目id或路由条目名进行过滤 | 诊断 |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | 操作失败，只有自定义路由条目才支持通过路由条目id或路由条目名进行过滤。 | 诊断 |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | 操作失败，已欠费。 | 诊断 |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | DNAT条目不允许公网IP地址等于私网IP地址 | 诊断 |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | 后段服务查询网卡信息失败 | 诊断 |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | 操作不允许，获取nfv服务列表失败 | 诊断 |
| 400 | OperationFailed.HavipBoundPortmap | Operation failed because Havip instance already bound portmap. | 操作失败，因为Havip实例已绑定端口映射。 | 诊断 |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | 健康检查IP无效 | 诊断 |
| 400 | OperationFailed.InformationIncomplete | Your information is incomplete. | 输入信息不完整。 | 诊断 |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | 当前vpc中不存在指定的实例。 | 诊断 |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | ECS绑定EIP失败，因为ECS实例不存在或不是VPC虚拟机. | 诊断 |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | 当前资源的状态不支持该操作 | 诊断 |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | 未知错误，请重试操作，错误仍存在请提交工单处理。 | 诊断 |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | 您当前操作的Ipv6实例已开通公网带宽，请勿重复开通 | 诊断 |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | 由于指定的带宽实例不存在，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | 由于带宽实例处于非稳态，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.InvalidCidrBlock | Operation failed because the specified network block is invalid. | 网段不合法。 | 诊断 |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | VBR 实例未获得 VPC 实例授权 ，请授权后重试。 | 诊断 |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | 创建路由条目失败，因为ECMP（Equal-Cost Multipath Routing）路由只支持一个非RI（non-ri）类型作为下一跳 | 诊断 |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | 操作失败，下一跳类型非法。 | 诊断 |
| 400 | OperationFailed.InvalidStatus | Route entry is not allowed to operate in current status. | 当前状态下禁止操作该路由条目。 | 诊断 |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | 申请失败，IP已经被锁定 | 诊断 |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | 当前操作与弹性网卡的IP Prefix冲突。 | 诊断 |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | 指定的前缀网段必须位于交换机预留网段内 | 诊断 |
| 400 | OperationFailed.IPsecServerExist | An IPsec server already exists in the VPN gateway. | VPN网关中已经存在一个IPsec服务端。 | 诊断 |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | EIP绑定IP失败，因为该VPC未开启IPv4网关. | 诊断 |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | 存在Eip绑定私网IP出公网的场景，此功能的实现依赖IPv4网关的存在，故无法删除IPv4网关。 | 诊断 |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | 指定的地址已被分配 | 诊断 |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | 指定的IPv6地址已被分配 | 诊断 |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | 操作失败，已开启IPv6。 | 诊断 |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | 操作失败，IPv6实例的带宽超出了待修改网关规格的最大带宽限制。 | 诊断 |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | 操作失败，该IPv6地址段已被使用。 | 诊断 |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | 输入的IPv6网段和现有的网段重叠。 | 诊断 |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | 操作失败，该IPv6地址段已被使用。 | 诊断 |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | 操作失败，未预留该IPv6地址段。 | 诊断 |
| 400 | OperationFailed.IPv6Disabled | Operation failed because IPv6 is not enabled for the vSwitch. | 指定操作失败，因为IPv6功能未打开。 | 诊断 |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | 该ipv6实例已存在仅主动出规则。 | 诊断 |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | 操作失败，因为ipv6网关仍在使用中 | 诊断 |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | 您所指定的Ipv6Address和Ipv6Gateway不在同一VPC内，请确认您的输入是否正确 | 诊断 |
| 400 | OperationFailed.Ipv6GatewayInUse | The IPv6 gateway is in use. | 无法修改VPC属性，因为IPv6网关仍在使用中。 | 诊断 |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | 您当前操作的Ipv6地址所在的VPC不存在Ipv6Gateway实例，请创建Ipv6Gateway再进行该操作 | 诊断 |
| 400 | OperationFailed.Ipv6InstanceExist | Operation failed because vswitch has ipv6 instance. | 交换机中存在IPv6实例。 | 诊断 |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | VPC存在IPv6路由,禁止关闭IPv6。 | 诊断 |
| 400 | OperationFailed.IpV6VSwitchInuse | Operation failed because some vswitch ipv6 is in use. | IPv6交换机仍在使用。 | 诊断 |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | 正在处理上一条令牌请求，请您稍后再试。 | 诊断 |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | 操作失败因为您未授权NAT会话日志投递权限 | 诊断 |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | VPN网关没有绑定任何证书。 | 诊断 |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | 当前VPN连接没有关联任何证书。 | 诊断 |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | dns域名资源处于非稳态，请稍后重试。 | 诊断 |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | 操作不支持, NAT实例架构不匹配. | 诊断 |
| 400 | OperationFailed.NatGatewayNotExist | The specified NatGateway does not exist. | 操作失败，NAT网关不存在. | 诊断 |
| 400 | OperationFailed.NatGwBandwidthQuotaExceed | The total bandwidth of the EIP bound to the NAT gateway exceeds the quota. | 操作失败因为绑定在NAT网关上的EIP的带宽总和超过限制。 | 诊断 |
| 400 | OperationFailed.NatGwBindWithBandwidthPackage | Operation failed because the NAT gateway is bound to bandwidth packages. | 操作失败因为NAT网关实例绑定了NAT带宽包。 | 诊断 |
| 400 | OperationFailed.NatGwRouteInMiddleStatus | Operation failed because the status of the route entry associated with the NAT gateway is abnormal. | 操作失败因为NAT网关相关的路由条目状态异常。 | 诊断 |
| 400 | OperationFailed.NatTypeInvalid | Only enhanced NAT gateway supports the operation. | 只有增强型NAT网关支持当前操作. | 诊断 |
| 400 | OperationFailed.NatTypeNotEnhanced | Operation failed because the specified NAT gateway type is not enhanced. | 操作失败因为指定的NAT网关类型不是增强型。 | 诊断 |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | 您的账户可用额度小于0，请先充值后再尝试购买。 | 诊断 |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | 区域没有可用资源。 | 诊断 |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | 该操作不受支持，因为IPv6实例没有公网带宽。 | 诊断 |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | 您还未通过实名认证，不符合购买条件。请登录用户中心进行实名认证。 | 诊断 |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | 账户中没有有效的支付方式。 | 诊断 |
| 400 | OperationFailed.NoPermission | You are not authorized to perform the operation. | 您没有该功能的操作权限. | 诊断 |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | Vpn服务没有权限操作您的IDaaS实例 | 诊断 |
| 400 | OperationFailed.NormalInventoryNotEnough | Operation failed because the inventory of standard NAT gateway is insufficient. | 操作失败因为普通型NAT网关的库存不足。 | 诊断 |
| 500 | OperationFailed.NormalInventoryNotEnough | Standard NAT gateways are no longer offered. You can create enhanced NAT gateways and set the correct natType. | 普通型NAT网关已不支持创建，请创建增强型NAT网关并确保正确配置NatType参数。 | 诊断 |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | VBR带宽值与所属共享专线带宽值不一致 | 诊断 |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | 不支持修改在共享端口上创建的虚拟路由器的带宽规格 | 诊断 |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | 操作失败，PrefixList不存在该引用关系 | 诊断 |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | 路由表和网关解绑操作失败，因为不存在绑定关系 | 诊断 |
| 400 | OperationFailed.NotSupportBizType | The specified instance type does not support the operation. | 操作失败因为指定的实例类型不支持此操作。 | 诊断 |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | 指定的下一跳不支持IPv6功能。 | 诊断 |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | 路由接口不支持IPv6。 | 诊断 |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | 您当前指定的计费类型需开通CDT计费，请开通CDT后重试 | 诊断 |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | 无法操作共享PrefixList | 诊断 |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | 路由下一跳实例处于运维锁定状态，无法操作。 | 诊断 |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | 操作失败因为实例已经被运维锁定。 | 诊断 |
| 400 | OperationFailed.PconnAllocateVlan0 | Vlan 0 Vbr cannot share the physical connection with another Vbr. | 物理专线上Vlan 0 不能和其他Vbr共存 | 诊断 |
| 400 | OperationFailed.PconnExistVlan0Vbr | The physical connection has VLAN 0 VBR. You cannot create another VBR. | 专线上已经存在VLAN 0 VBR，不允许创建其它VBR。 | 诊断 |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | 操作失败，因为出方向流量未开通。 | 诊断 |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | 操作失败，因为未开通出云流量服务。 | 诊断 |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | 添加 BGPGroup 时对端自治系统编号不能与本端自治系统编号相同, 请核对参数后重试. | 诊断 |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | 共享端口为欠费锁定状态，无法修改vlan。 | 诊断 |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | 共享端口为已终止状态，无法修改vlan。 | 诊断 |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | 您传入的私网IP地址不存在。 | 诊断 |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | 当前NAT网关不支持修改PrivateLinkMode。 | 诊断 |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | 下单时查询账号信息失败 | 诊断 |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | 查询Attachment信息失败。 | 诊断 |
| 400 | OperationFailed.QueryCenEntry | Operation is denied because getting CEN route entry has failed. | 由于暂时无法获取云企业网路由导致查询失败。 | 诊断 |
| 400 | OperationFailed.QueryCenIpv6Status | Failed to query the IPv6 status of the specified VPC in CEN. | 查询CEN中该VPC的IPv6状态失败。 | 诊断 |
| 400 | OperationFailed.QueryNetworkInterfaceInfo | Failed to query network interface information. | 查询网卡信息失败。 | 诊断 |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | 查询订单失败，调用trade应用出错。 | 诊断 |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | 创建订单时查询价格失败。 | 诊断 |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | 查询实例订购信息失败 | 诊断 |
| 400 | OperationFailed.QuotaExceedPerTimeWindow | The maximum number of scheduled migration within the specified time window is exceeded. | 操作失败因为该时间窗口的预约达到上限。 | 诊断 |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | 您当前quota配额不足，请您可以联系渠道伙伴为您增加额度 | 诊断 |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | 您当前quota配额不足，请您可以联系渠道伙伴为您增加额度。 | 诊断 |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | 客户您好，阿里云计划对当前地域进行优化调整，该区域云服务将停止运营，为确保您的业务连续性及数据迁移工作的平稳过渡，您目前无法操作新购等类型的订单，感谢理解与支持。 | 诊断 |
| 400 | OperationFailed.RegionNotSupport | The specified region does not support the feature. | 当前地域未支持该功能. | 诊断 |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | 您指定预留的Cidr不满足预留条件 | 诊断 |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | 操作失败，原因是资源正处于绑定状态。 | 诊断 |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | 公网IP地址池已经共享给其他用户，不允许删除。 | 诊断 |
| 500 | OperationFailed.ResourceNotEnough | Insufficient resources. | 您申请的资源不足，如仍需申请，请提工单处理 | 诊断 |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | 您申请的资源不足，如仍需申请，请提工单处理 | 诊断 |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | 由于资源uid不存在，操作失败。 | 诊断 |
| 400 | OperationFailed.RiskControl | Risk control check failed. | 我们检测到您的付款方式存在安全风险。请通过电子邮件或控制台消息中的链接继续验证，并在验证后重新提交订单。 | 诊断 |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to another VPN on the same network block. | 在VPC路由表中同一网段上已经存在一条指向另一个VPN网关的路由。 | 诊断 |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to a non-RI and non-VPN next hop on the same network block. | 在VPC路由表中同一网段上已经存在一条指向RI、VPN网关之外其他资源的路由。 | 诊断 |
| 404 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | 操作与已存在的路由冲突，操作失败。 | 诊断 |
| 400 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the route to create conflicts with the client IP pool of the IPsec server. | 路由的目标网段和IPsec服务端的客户端网段冲突。 | 诊断 |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | 路由配置与IPsec服务端冲突。 | 诊断 |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | 由于实例关联的路由条目处于非稳态，请稍后重试 | 诊断 |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | 使用子项目验证销售条件失败。 | 诊断 |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | 操作失败，因为超出了活动路由条目的配额。 | 诊断 |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | 操作失败，不支持此活动路由条目的类型。 | 诊断 |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | 操作失败，因为超出了备用路由条目的配额。 | 诊断 |
| 404 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | 托管实例不允许进行该操作 | 诊断 |
| 400 | OperationFailed.SnatInMiddleStatus | Operation failed because the status of the SNAT entry of the specified NAT gateway is abnormal. | 操作失败因为指定的NAT网关的SNAT条目状态异常。 | 诊断 |
| 400 | OperationFailed.SnatIpsTooMany | The maximum number of IP addresses is exceeded in the SNAT pool. | snat pool中的ip过多. | 诊断 |
| 400 | OperationFailed.SnatQuotaExceed | Operation failed because the maximum number of SNAT entry is exceeded. | 操作失败因为SNAT条目数量过多。 | 诊断 |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | 私网类型VPN网关不支持开启SSL功能。 | 诊断 |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | BGP路由有残留，无法关闭路由自动传播。 | 诊断 |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | 操作失败 | 诊断 |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | 资源的交易信息同步失败。 | 诊断 |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | 系统繁忙，请稍后重试 | 诊断 |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | 指定的VSwitchCidrReservationCidr不能包含系统预留IP地址 | 诊断 |
| 400 | OperationFailed.TargetUserPconnTrafficNotEnable | The operation failed because of TargetUserPconnTrafficNotEnable. | 目标用户没有开通出云流量，因此操作失败。 | 诊断 |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | 创建订单失败，因为token无效 | 诊断 |
| 400 | OperationFailed.UnpaidBillsExist | The account has unpaid bills. Please pay your overdue bill first. | 此账户有未支付的订单。 | 诊断 |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | 您当前指定购买的实例类型需升级CDT计费，请升级CDT后重试 | 诊断 |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | VPC还有静态路由指向ECR，不允许解除关联 ECR | 诊断 |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | 操作失败，不允许配置限速。 | 诊断 |
| 400 | OperationFailed.VbrBindedPconn | The operation failed because of VbrBindedPconn. | 操作失败，因为Vbr绑定了Pconn | 诊断 |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | VBR已绑定PCONN。 | 诊断 |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | 边界路由器已被锁定，请稍后重试。 | 诊断 |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The operation failed because of VirtualPhysicalConnectionExistVBR. | VirtualPhysicalConnection已经存在VBR | 诊断 |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | 共享专线已创建一个VBR，无法继续创建 | 诊断 |
| 400 | OperationFailed.Vlan0VbrUnSharePconn | VLAN 0 VBR cannot share the physical connection with another VBR. | 专线已有其它VLAN 0 VBR，不允许在此专线创建VLAN 0 VBR。 | 诊断 |
| OperationFailed.VlanIdAlreadyInUse | The specifed vlanId has been used. | 该VLAN已经被占用。 | 诊断 | |
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | vlanId已经被使用 | 诊断 |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | 当前操作不支持因为VPC尚未开启IPv6。 | 诊断 |
| 400 | OperationFailed.VpcNotExist | The specified VPC does not exist. | 指定的VPC不存在。 | 诊断 |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | 操作失败，未找到vpc | 诊断 |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | 无法操作Vpconn | 诊断 |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | 共享端口依然存在，无法终止此物理端口。 | 诊断 |
| 400 | OperationFailed.VPconnCreated | The operation failed because VPconn is already created. | Vpconn已经创建，不需要重复创建 | 诊断 |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | 无法创建VPconn | 诊断 |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | VPC系统路由表未开启接受传播路由 | 诊断 |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | VPC最多只支持一个动态路由学习源，请将VPC从ECR中移除 | 诊断 |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | VPC最多只支持一个动态路由学习源，请在转发路由器中关闭对该VPC的路由同步 | 诊断 |
| 400 | OperationFailed.VpnConnectionExist | Auto propagate cannot be closed when VPN connections with BGP enabled exist. | 当存在已开启BGP的VPN连接时，路由自动传播无法关闭。 | 诊断 |
| 400 | OperationFailed.VRouterNotExist | Operation failed because the VRouter does not exist. | 操作失败因为虚拟路由器不存在。 | 诊断 |
| 400 | OperationFailed.VswBindedAcl | The operation failed because a network ACL is associated with the specified VSwitch. | 操作失败因为指定的vSwitch绑定了网络ACL。 | 诊断 |
| 400 | OperationFailed.VswBindedRouteTable | The operation failed because a custom route table that contains subnet routes is associated with the specified VSwitch. | 操作失败因为vSwitch绑定了子网路由表。 | 诊断 |
| 400 | OperationFailed.VswHasAcl | Operation failed because the specified VSwitch is associated with a network ACL. | 操作失败因为指定的虚拟交换机关联了网络ACL。 | 诊断 |
| 400 | OperationFailed.VswHasRouteTable | Operation failed because the specified VSwitch is associated with a route table. | 操作失败因为指定的虚拟交换机关联了子网路由表。 | 诊断 |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | 指定的VSwitchCidrReservationCidr与已有的VSwitchCidrReservation网段冲突 | 诊断 |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | 指定的VSwitch未开通Ipv6，请开通Ipv6后再进行该操作 | 诊断 |
| 400 | OperationFailed.VSwitchNoAvailableIp | Operation failed because the number of available IP addresses of the specified VSwitch is insufficient. | 操作失败因为虚拟交换机的可用IP数量不足。 | 诊断 |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | 当前虚拟交换机未找到。 | 诊断 |
| 400 | OperationFailed.VSwitchNotInVpc | The specified VSwitch and NAT gateway must be in the same VPC. | VSwitch和NAT网关须属于同一个VPC. | 诊断 |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | 交换机正在创建中。 | 诊断 |
| 400 | OperationFailed.VswNotBelongToVpc | Operation failed because the specified VSwitch is not bound to the same VPC with NAT gateway. | 操作失败，因为交换机和NAT网关不属于同一个VPC。 | 诊断 |
| 400 | OperationFailed.VswNotExist | The specified VSwitch does not exist. | 指定的交换机不存在。 | 诊断 |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | 当前操作不支持因为可用区Id不匹配。 | 诊断 |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | 操作不支持 | 诊断 |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | 操作不支持访问AccessDevice | 诊断 |
| 400 | OperationUnsupported.action | This action is not support. | 此操作不支持。 | 诊断 |
| 400 | OperationUnsupported.AdvancedFeature | Advanced features of the vpc is unsupported. | 不支持该高级特性。 | 诊断 |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | 指定分配的Ip地址数量大于上限，请按API文档参数说明修改后重试 | 诊断 |
| 400 | OperationUnsupported.BindMultipleType | You cannot bind HaVip to multiple instance types. | 不允许同时绑定ECS实例和网卡。 | 诊断 |
| 400 | OperationUnsupported.BindOnFreeNetworkInterface | The network interface must be attached to an ECS instance. | 网卡必须绑定在ECS实例上。 | 诊断 |
| 400 | OperationUnsupported.BindOnMultipleVswitch | The bound instance and HaVip must be on the same vSwitch. | 绑定的实例和HaVip必须位于同一台交换机上。 | 诊断 |
| 400 | OperationUnsupported.BindOnSameEcs | You cannot bind two network interfaces on the same ECS instance. | 不允许绑定同一台ECS上的两张网卡。 | 诊断 |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | 当前操作不支持无slave的bonding网卡。 | 诊断 |
| 400 | OperationUnsupported.CenIpv6Enabled | The IPv6 feature is enabled in CEN. | IPv6功能在CEN中已被打开。 | 诊断 |
| 400 | OperationUnsupported.CidrConflict | The specified CIDR block conflicts with an existing SNAT entry. | 您指定的CIDR的网段与已有的SNAT条目冲突。 | 诊断 |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | 路由条目中指定的目标IPv6网段与vSwitch网段重叠。 | 诊断 |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | 您在路由条目中指定的目的IPV6地址包含在vSwitch交换机网段内。 | 诊断 |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | 该地域的DhcpOptionsSet未支持自定义LeaseTime | 诊断 |
| 400 | OperationUnsupported.DhcpOptionsSet | The DHCP options set feature in this region is not supported. | 当前区域暂时不支持DHCP选项集功能。 | 诊断 |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | 当前操作不支持因为尚未开启IPv6功能。 | 诊断 |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | 不支持在未绑定资源的IPv6实例上创建仅主动出规则 | 诊断 |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | 免费版IPv6网关不支持创建仅主动出规则，请将IPv6网关升级为企业版或企业增强版。 | 诊断 |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | 指定地域尚未支持交换粒度的仅主动出规则。 | 诊断 |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | 创建snat不可以使用绑定中的eip | 诊断 |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | 当前EIP不属于NAT带宽包。 | 诊断 |
| 400 | OperationUnsupported.EipNatGWCheck | Operation is not supported because the relation check of EIP and NAT gateway has failed. | 操作不支持因为EIP和NAT网关关系校验失败。 | 诊断 |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | 当前版本的VPN不支持开启BGP | 诊断 |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | 当前地域不支持开启BGP。 | 诊断 |
| 400 | OperationUnsupported.EnhancedCURegion | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | 当前地域不支持CU计费的增强型NAT网关 | 诊断 |
| 400 | OperationUnsupported.EnhancedRegion | Enhanced NAT Gateway is not supported in this region. | 当前地域不支持增强型NAT网关 | 诊断 |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | 由于 financialLocked，该操作被禁止。 | 诊断 |
| 400 | OperationUnsupported.ForwardEntry | Duplicated destination ip port is unsupported. | 不支持重复的目标IP端口。 | 诊断 |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | 当前地域不支持分配游离态IPv6地址实例 | 诊断 |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | Ipv6Prefix特性在该地域不支持 | 诊断 |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | 当前不支持分配游离态私网IPv6地址。 | 诊断 |
| 400 | OperationUnsupported.HavipBindType | You cannot bind HAVIP to network interface in the specified region. | 您所在的地域不支持绑定网卡。 | 诊断 |
| 400 | OperationUnsupported.IpNotInCbwp | The specified eip not exist in the commonBandwidthPackage. | 带宽包中不存在该EIP | 诊断 |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | 不支持指定的IPsec Pfs | 诊断 |
| 400 | OperationUnsupported.IPsecServer | The current version of the VPN gateway does not support IPsec server. | 当前VPN网关版本不支持IPsec服务端。 | 诊断 |
| 400 | OperationUnsupported.IpType | The EIP type does not support the operation. | 该eip类型不允许添加。 | 诊断 |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | 不支持此IPv6CidrBlock。 | 诊断 |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | IPv6不支持Ecmp路由。 | 诊断 |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | 不允许创建下一跳为主网卡的IPv6路由。 | 诊断 |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | 当前地域不支持Ipv6特性。 | 诊断 |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | 当前操作不支持IPv6特性。 | 诊断 |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | 地域不支持IPV6 | 诊断 |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | VBR不支持IPv6路由。 | 诊断 |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | 当前操作不支持ULA地址。 | 诊断 |
| 400 | OperationUnsupported.ModifyBandwidth | You cannot modify the bandwidth of the VBR in sale. | 售卖VBR不允许修改成别的带宽。 | 诊断 |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | 修改的带宽参数不支持保存 | 诊断 |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | 操作不支持，因为指定的路由下一跳实例绑定了多个IPv6地址 | 诊断 |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | 不允许指定绑定了多个IPV6地址的下一跳。 | 诊断 |
| 400 | OperationUnsupported.NatConvert | The NAT gateway conversion function is not supported. | NAT网关类型转换功能未支持。 | 诊断 |
| 400 | OperationUnsupported.NATGWBONDINGENI | Operation is unsupported because the specified network interface is created with enhanced NAT gateway. | 操作失败因为绑定的ENI实例是增强型NAT网关创建产生。 | 诊断 |
| 400 | OperationUnsupported.NormalInventoryNotEnough | Operation is unsupported because the inventory of standard NAT gateway is insufficient. | 操作失败因为普通型的NAT网关库存不足。 | 诊断 |
| 400 | OperationUnsupported.NotPConnOwner | Only the owner of the leased line can update the bandwidth. | 非专线所有者不允许更新带宽操作。 | 诊断 |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | 此操作不支持因为一个VPC只能有一个IPv6网关。 | 诊断 |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | 下一跳只支持绑定普通弹性网卡 | 诊断 |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | 只支持ULA类型的IPv6地址。 | 诊断 |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | 按量计费NAT网关的规格不支持修改 | 诊断 |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | Ipv6公网带宽不支持预付费，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | OperationUnsupported.PrePaidPyByLcu | The operation failed because the subscription NAT gateway does not support the pay-by-LCU billing method. | 预付费的NAT网关实例不支持PayByLcu的计费方式。 | 诊断 |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | 当前操作不支持私网GUA地址。 | 诊断 |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | 发布路由前缀列表路由操作不支持。 | 诊断 |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | 发布系统路由操作不支持。 | 诊断 |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | 当前用户不支持创建QoS，请联系商务经理 | 诊断 |
| 400 | OperationUnsupported.RegionAndServiceLocationNotMatch | Operation is not supported because the region and service location do not match. | 操作不支持因为Region和服务区域不支持。 | 诊断 |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroup is not supported in this region. | 资源组功能未打开。 | 诊断 |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | 操作不支持，在金融云中不支持资源组id | 诊断 |
| 400 | OperationUnsupported.RouterInterfaceExist | Operation failed because the VPC has a router interface. | 操作失败因为VPC有路由器接口存在。 | 诊断 |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | 不支持此路由类型。 | 诊断 |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | 不允许操作，该实例属于托管资源。 | 诊断 |
| 400 | OperationUnsupported.SetDPD | Current version of the VPN does not support setting DPD. | 当前VPN网关版本不支持DPD功能。 | 诊断 |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | You cannot set the bandwidth of VBR with multiple physical connections. | VBR多PCONN不支持设置带宽。 | 诊断 |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | 不支持多物理连接带宽 | 诊断 |
| 400 | OperationUnsupported.SetNatTraversal | Current version of the VPN does not support setting NAT traversal. | 当前VPN网关版本不支持NAT穿越功能。 | 诊断 |
| 400 | OperationUnsupported.SkipConstruction | You are not authorized to skip the construction. | 你没有权限跳过施工到支付。 | 诊断 |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | 不能跳过施工步骤进入下一步 | 诊断 |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | 创建IPv6路由不允许指定private IP参数。 | 诊断 |
| 404 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | 无法解除系统路由表的关联。 | 诊断 |
| 400 | OperationUnsupported.ULA | %s is unsupported. | 当前操作不支持ULA地址 | 诊断 |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | 该地域不支持创建未绑定资源的IPv6地址实例。 | 诊断 |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | 该地域不支持创建未绑定资源的IPv6前缀网段。 | 诊断 |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | 路由条目的下一跳类型不支持发布。 | 诊断 |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | 操作失败，因为VBR已关联到CEN。 | 诊断 |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | 边界路由器已经绑定了专线网关, 先将边界路由器从专线网关中删除后重试。 | 诊断 |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | vbr绑定了多个pconn | 诊断 |
| 400 | OperationUnsupported.VirtualBorderRouterEnableIPv6 | The operation failed. The device or region does not support IPv6 functions. | 操作失败，设备或region不支持IPv6功能 | 诊断 |
| 400 | OperationUnsupported.VpcAttachedCen | Operation failed because the VPC is attached to CEN. | 操作失败因为VPC加入了CEN。 | 诊断 |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | 对端的路由器接口已被删除 | 诊断 |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | 您无权使用请求的 flowLog 服务。 确保您已经订阅了您尝试使用的服务。 | 诊断 |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | 您无权使用请求的IP地址池服务。 确保您已经订阅了您尝试使用的服务。 | 诊断 |
| 400 | OptInRequired.TrafficMirror | You need to subscribe to the traffic mirror service first. | 未开通流量镜像服务。 | 诊断 |
| ORDER.ACCOUNT_STATUS_ILLEGAL | 账户状态非法 | 诊断 | ||
| ORDER.ARREARAGE | 账户余额不足。 | 诊断 | ||
| ORDER.BID_USER_ ORDER_FORBIDDEN | 此账户不能购买竞价型实例。 | 诊断 | ||
| ORDER.INSTANCE_HAS_INACTIVE_CHANGE | 变更正在处理中。 | 诊断 | ||
| ORDER.INST_HAS_UNPAID_ORDER | 此账户有未支付的订单。 | 诊断 | ||
| ORDER.INST_HAS_UNSETTLED_BILLS | 此账户有未支付的订单。 | 诊断 | ||
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | 您尚未进行实名认证，请前往账号中心完成实名认证。 | 诊断 |
| ORDER.NOT_ENOUGH_ACTIVITY_STOCK | 活动库存不足 | 诊断 | ||
| ORDER.NO_REAL_NAME_AUTHENTICATION | 账户尚未完成实名认证。 | 诊断 | ||
| ORDER.OPEND | 实例已经开通 | 诊断 | ||
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | 已经开通出云流量服务，去控制台使用它。 | 诊断 |
| ORDER.ORDER_AMOUNT_ILLEGAL | 订单金额无效。 | 诊断 | ||
| ORDER.PERIOD_INVALID | 购买的周期无效 | 诊断 | ||
| 400 | ORDER.QUANTITY_INVALID | User quota has exceeded the limit. | 您当前保有的EIP数量已达上限，可前往配额管理提升EIP数量配额 | 诊断 |
| ORDER.QUOTA_EXCEEDED | 超出购买限额 | 诊断 | ||
| ORDER.SYS_CONSTRAINT_INVALID | 订单系统约束校验不通过 | 诊断 | ||
| 400 | OrderError | Failed to create the order. | 创建订单失败，请稍后重试. | 诊断 |
| 400 | OrderError.EIP | Failed to place an order. | 下单失败 | 诊断 |
| 400 | OrderError.EIP | The account failed to create an order. | 下单失败 | 诊断 |
| 400 | OrderError.EIP | The Account failed to create order. | 下单失败 | 诊断 |
| OrderFailed | 创建订单失败。 | 诊断 | ||
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | 创建订单失败，因为并发操作。 | 诊断 |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | 参数natGatewayId不合法。 | 诊断 |
| 400 | Parameter.Illegal | The parameter is illegal. | 参数非法 | 诊断 |
| ParameterIllegal | ipCount | 参数IpCount的值不合法。 | 诊断 | |
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | 规则条目名称非法 | 诊断 |
| 400 | ParameterInvalid | Invalid parameter. | 入参非法 | 诊断 |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | 规则条目的名称长度非法 | 诊断 |
| ParameterMismatch.Role-Spec | The specified Spec and Role mismatch. | 该路由器接口规格和角色不匹配。 | 诊断 | |
| PARAMETER_MUST_NOT_NULL | The specified physical connection id or vbrId must not be null. | 必须指定参数vbrId和physicalconnectionId。 | 诊断 | |
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | 操作冲突，不允许同时修改Ipv6Cidr和DisableIpv6功能。 | 诊断 |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId和BandwidthPackageId是互斥的。 | 诊断 |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | 传入的Ipv6AddressId和Ipv6InternetBandwidthId不属于同一实例 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId和RouteTableIdOrDestCidrBlock是互斥的。 | 诊断 |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | 为NAT网关实例创建SNAT规则时，不能同时传入SnatIp参数和NetworkInterfaceId参数。 | 诊断 |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId 和 VpnConnectionId 是互斥的。 | 诊断 |
| ParamsInvalid | 请求参数错误 | 诊断 | ||
| PAY.ACCOUNT_BOOK_NOT_EXIST | 指定的账簿不存在。 | 诊断 | ||
| PAY.AMOUNT_LIMIT_EXCEEDED | 金额超限 | 诊断 | ||
| PAY.COUPON_NOT_EXIST | 代金券不存在 | 诊断 | ||
| PAY.COUPON_NOT_MEET_CONSUMPTION_RULE | 指定的优惠券不合规，无法使用。 | 诊断 | ||
| PAY.CURRENCY_INCONSISTENCY | 币种不匹配 | 诊断 | ||
| PAY.CURRENCY_NOT_SUPPORTED | 此账户不支持使用这种货币。 | 诊断 | ||
| PAY.GET_PAY_URL_ERROR | 获取充值url异常 | 诊断 | ||
| PAY.INSUFFICIENT_BALANCE | 账户余额不足。 | 诊断 | ||
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | 账号余额不足 | 诊断 |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | 账号余额不足 | 诊断 |
| PAY.INVALID_AMOUNT | 支付金额无效 | 诊断 | ||
| PAY.INVALID_CREDIT_CARD | 指定的信用卡无效。 | 诊断 | ||
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | 费用非法 | 诊断 |
| PAY.NO_CREDIT_CARD | 此账户尚未添加信用卡。 | 诊断 | ||
| PAY.PAYMENT_PARAMETER_INVALID | 支付参数无效。 | 诊断 | ||
| PAY.PAY_ORDER_FAILED | 订单支付失败，请您稍后重试。 | 诊断 | ||
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | 凌霄查询当前用户托管关系失败。 | 诊断 |
| PAY.QUERY_QUOTA_BOOK_FAILED | 查询用户限额账本失败 | 诊断 | ||
| PAY.REFUND_FAILED | 退款失败。 | 诊断 | ||
| PAY.STORED_CARD_NOT_EXIST | 指定的储值卡不存在。 | 诊断 | ||
| PAY.TAX_CALC_FAILED | 税额计算失败。 | 诊断 | ||
| PAY.USER_DECLINED | 用户拒付 | 诊断 | ||
| PAY.WITHHOLDING_AGREEMENT_ILLEGAL | 预扣税协议无效。 | 诊断 | ||
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | 包含了超过1个跨账号VBR的物理专线不支持故障演练。 | 诊断 |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | 包含了超过1个共享物理专线的物理专线不支持故障演练。 | 诊断 |
| PHYSICAL_NOT_ALLOW_ASSOCIATE_VBR | The specified operation not allow. | 无法执行该操作，物理专线有关联的边界路由器。 | 诊断 | |
| 400 | PHYSICAL_NOT_ASSOCIATE_TO_VBR | The specified PhysicalConnection have not associate to the vbr. | 该物理专线没有创建边界路由器。 | 诊断 |
| PRICE.INQUIRY_FAILED | 定价查询失败。 | 诊断 | ||
| PRICE.INVALID_INQUIRY_PARAMETER | 指定的定价查询参数无效。 | 诊断 | ||
| PRICE.PRICING_PLAN_NOT_FOUND | 指定的定价方案不存在。 | 诊断 | ||
| PRICE.PRICING_PLAN_RESULT_NOT_FOUND | 未匹配成功实例定价计划，请您提交工单咨询。 | 诊断 | ||
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | 商品定价计划未找到 | 诊断 |
| 400 | Price.SystemError | Price inquiry failed. | 询价失败，请稍后重试. | 诊断 |
| PRICE.TAXING_ERROR | 计税失败 | 诊断 | ||
| PRODUCT.INSTANCE_RELEASED | 指定的实例已被释放。 | 诊断 | ||
| PRODUCT.INSTANCE_TYPE_NOT_EXIST | 指定的实例类型不存在。 | 诊断 | ||
| PRODUCT.INSTANCE_TYPE_NOT_SUPPORTED | 此实例类型不可用于该账户。 | 诊断 | ||
| PRODUCT.INSUFFICIENT_STOCK | 由于相关资源不足，请求失败。 | 诊断 | ||
| PRODUCT.NOT_AVAILABLE_IZ | 不支持指定的可用区。 | 诊断 | ||
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | 指定的项目或logstore不存在。 | 诊断 |
| PURCHASE.NO_VAILD_PURCHASE | 购买无效。 | 诊断 | ||
| PURCHASE.PURCHASE_QUERY_FAILED | 查询不到指定的购买记录。 | 诊断 | ||
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | 购买数量超出最大限额 | 诊断 |
| QUANTITY_INVALID | 实例数超过限制。 | 诊断 | ||
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | 未查询到该vpn 连接下的连接日志 | 诊断 |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | 可以绑定的多直通模式eip数目超过限制。 | 诊断 |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | 网络ACL规则条目超出限制 | 诊断 |
| QuotaExceed.RouterInterface | Living RouterInterface quota exceeded. | 当前激活的路由器接口数量已达到配额。 | 诊断 | |
| QuotaExceeded | Route entry quota exceeded in this route table. | 超过路由条目配额。 | 诊断 | |
| 400 | QuotaExceeded | Forward entry quota exceeded in this route table. | 同一个路由表中自定义路由条目不能超过200条，可以在配额管理页面申请调整数量。 | 诊断 |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | prefixList最大路由条目数超过关联的路由表允许的最大路由条目 | 诊断 |
| 400 | QuotaExceeded | RiPerUser quota exceeded | 当前用户建立的对等连接路由器接口数量已达上限 | 诊断 |
| 400 | QuotaExceeded.AttachVpcNumber | The maximum number of VPCs that can be attached to a DHCP options set is exceeded. | 单DHCP选项集实例可绑定的VPC数量已经超过配额。 | 诊断 |
| QuotaExceeded.BandwidthPackageCountOnNatGateway | BandwidthPackage count limit on one NatGateway exceeded. | 超过了共享带宽包上限，一个NAT网关最多可创建四个共享带宽包。 | 诊断 | |
| 400 | QuotaExceeded.BandwidthPackageIps | The specified ipCount exceeded quota. | IP数量超过上限，可以在配额管理页面申请增加配额。 | 诊断 |
| 400 | QuotaExceeded.Bgp | bgp peer count per vbr quota exceed. | 边界路由器的BGP邻居数量已达到配额。 | 诊断 |
| QuotaExceeded.Bgp | bgp group count per vbr quota exceed. | 边界路由器的BGP组的数量已达到配额。 | 诊断 | |
| QuotaExceeded.BgpNetwork | bgp network count per vbr quota exceed. | 边界路由器的BGP网络数量已达到配额。 | 诊断 | |
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | 超过 VSwitchCidrReservation 的数量配额。 | 诊断 |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | 您创建的CidrReservation已超限 | 诊断 |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | 配额超限 | 诊断 |
| 400 | QuotaExceeded.DomainNameServers | The maximum number of domain name servers cannot exceed 4. | 配置的DomainNameServers数量超过4个。 | 诊断 |
| 400 | QuotaExceeded.Eip | Elastic IP address quota exceeded. | 弹性公网IP的个数超过额度限制，如果您有更多额度的需求，您可申请提升弹性公网IP配额，或者考虑使用NAT网关。 | 诊断 |
| 400 | QuotaExceeded.EipNumForModifyEipBondType | The quota of %s is exceeded, binded: %s, quota: %s. | 修改EIP绑定类型时允许的EIP个数超限 | 诊断 |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | 流量镜像筛选条件所关联的镜像会话数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | 已达到流日志的最大实例数。 | 诊断 |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | dnat session 多对一的配额超限。 | 诊断 |
| QuotaExceeded.freePconnPerAP | free physical connections count excceeded. | 超过物理专线配额。 | 诊断 | |
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | 超过用户能创建的物理专线配额, 请联系管理员增加配额后重试. | 诊断 |
| QuotaExceeded.freevbr | Free virtual boarder router quota exceed. | 超过边界路由器配额。 | 诊断 | |
| 400 | QuotaExceeded.FullNatEntry | The quota of %s is exceeded, usage %s/%s. | FullNatEntry使用个数已经超额。 | 诊断 |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | 单VPC创建网关路由表Quota已达上限。 | 诊断 |
| QuotaExceeded.GlobalAccelerationInstance | 全球加速实例数超过限制。 | 诊断 | ||
| 400 | QuotaExceeded.GUAIpv6CidrBlock | GUAIpv6CidrBlock quota exceeded. | GUAIpv6CidrBlock已经达到配额限制。 | 诊断 |
| QuotaExceeded.HaVip | Living HaVip quota exceeded. | 超过活跃的HAVIP配额。 | 诊断 | |
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | VPC中的IPv6网段数超过了限制。 | 诊断 |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | Ipv6EgressRules数量配额超限 | 诊断 |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | 指定的IPv6前缀掩码超出配额。 | 诊断 |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | 单个网卡所能关联的流量镜像会话数量配额超限。 | 诊断 |
| QuotaExceeded.Nqa | nqa count per vbr quota exceed. | NQA数超过VBR配额。 | 诊断 | |
| 400 | QuotaExceeded.NumberOfEip | Binded eip Quota exceed on this NatGw. | 此NAT网关上，绑定的EIP数量已经超出配额限制 | 诊断 |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | 创建的策略路由条数已达上限 | 诊断 |
| QuotaExceeded.pConnPerAP | Physical connection count per ap quota exceed. | 超过接入点的物理专线配额。 | 诊断 | |
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | 超过单接入点可购买的物理专线配额, 请联系管理员增加配额. | 诊断 |
| 400 | QuotaExceeded.PolicyBasedRoute | The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s. | 策略路由条数已达上限，当前已有%s条，本次将创建%s条，上限为%s条。 | 诊断 |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | 地址池中IP数量配额超出限制。 | 诊断 |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | 前缀数超过配额。 | 诊断 |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | 传入的最大entryCount超过阈值 | 诊断 |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | prefixList允许的最大路由条目数量超过限制 | 诊断 |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | 用户可创建的prefixList超过阈值 | 诊断 |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | 您的PublicIpAddressPool数量已达配额，请提升配额后操作 | 诊断 |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | 当前用户的QoS策略数量超过限制，请联系商务经理解决。 | 诊断 |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | QoS策略中高优先级队列个数超过规格，如果需要提升配额，请联系商务经理。 | 诊断 |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | QoS策略中普通优先级队列的带宽百分比之和超过规格。 | 诊断 |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | QoS策略中普通优先级队列个数超过规格，如果需要提升配额，请联系商务经理。 | 诊断 |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | QoS队列中QoS规则数量超过上限，如果想要提升配额，请联系商务经理。 | 诊断 |
| 400 | QuotaExceeded.RegionDhcpOptionsSet | The quota of dhcpOptionsSet in the region is exceeded. | 单用户允许创建DHCP选项集实例数量超过配额。 | 诊断 |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | 您指定的 ReservedCidrMask不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | 超过VPC RouteTable配额。 | 诊断 |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | VBR超过配额 | 诊断 |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | 流量镜像会话数量超限。 | 诊断 |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | 单个SLB所能关联的流量镜像会话数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | 每个流量镜像会话所允许关联的源的数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | 该镜像目标关联的镜像源数量超过限额。 | 诊断 |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | quota超限 | 诊断 |
| 400 | QuotaExceeded.TrafficMirrorFilter | The maximum number of traffic image filters is exceeded. | 流量镜像筛选条件数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | 单个流量镜像筛选条件所关联的筛选规则数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.VBRBandwidth | The VBR bandwidth must not exceed the physical connection bandwidth. | 边界路由器带宽超过限制（物理专线带宽） | 诊断 |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | 设备配额超限 | 诊断 |
| QuotaExceeded.vbrPerpConn | Virtual boarder router per PhysicalConnection quota exceed. | 超过了每个物理专线上的边界路由器配额上限，请您减少该物理专线上的边界路由器数量后再试。 | 诊断 | |
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | quota超限 | 诊断 |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | The quota for virtual border router bandwidth is exceeded. | VirtualBorderRouterBandwidth配额超限。 | 诊断 |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | VBR带宽配额超限 | 诊断 |
| 400 | QuotaExceeded.Vpc | VPC quota exceeded. | 用户名下的VPC数量达到配额上限。 | 诊断 |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | 单根物理端口上创建的共享端口配额超限 | 诊断 |
| 400 | QuotaExceeded.VpnRouteEntry | The number of route entries to the VPN gateway in the VPC routing table has reached the quota limit. | VPC路由表中指向VPN网关的路由条目已经达到配额限制。 | 诊断 |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | 创建路由条目失败，因为vpn路由条目超出限制 | 诊断 |
| 400 | QuotaExceeded.VSwitch | Virtual switch quota exceeded. | vSwitch数量达到配额上限，请您减少vSwitch数量后再试。 | 诊断 |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | VSwitchCidrReservationMask 超出配额，请参考API文档参数说明修改后重试。 | 诊断 |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | 操作失败因为%s配额的限制。预留网段的掩码超过了当前IP Prefix的默认掩码，%s/%s。 | 诊断 |
| RealNameAuthenticationError | Your account has not passed the real-name authentication yet. | 您的账号尚未进行实名认证，请您先对账号做实名认证后再操作。 | 诊断 | |
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | 路由器接口被路由条目引用。 | 诊断 |
| ReserveIpFail | Reserve eip failed. | EIP预留失败。 | 诊断 | |
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | 策略路由配额超限 | 诊断 |
| Resource.QuotaFull | The quota of resource is full | 资源配额已达上限。 | 诊断 | |
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | 您现在所操作的资源目前已经达到了配额的上限，请参考VPN操作文档，进行配额提升或者使用其他方案进行规避。 | 诊断 |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | 指定的网关路由表已绑定同类型网关实例 | 诊断 |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | 指定的ipv4网关已经被绑定 | 诊断 |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | 物理专线已经绑定到了其他的QoS策略上。 | 诊断 |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | 操作失败，此前缀列表路由存在。 | 诊断 |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | 指定的路由表已经被绑定。 | 诊断 |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | 指定的流量镜像源和会话已经绑定。 | 诊断 |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | 指定的VBR已经被绑定 | 诊断 |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | 默认交换机已存在。 | 诊断 |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | 此FULLNAT规则已经存在 | 诊断 |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | 配置的NatIp已存在 | 诊断 |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | 配置的NatIpCidr已存在, 或者IP地址存在覆盖 | 诊断 |
| 400 | ResourceAlreadyExist.NatQosEntry | The specified natGateway qosEntry already exists | 此限速规则已经存在 | 诊断 |
| 400 | ResourceInConfiguring | The resource is being configured. | 资源正在变配中。 | 诊断 |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | 指定的vbr还在使用 | 诊断 |
| ResourceNotAssociated | The HaVip and ECS instance are not associated. | HAVIP和ECS没有绑定。 | 诊断 | |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | 操作失败，本VPC未关联到此CEN中。 | 诊断 |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | 当前资源未与专线网关关联，无法执行此操作，请核对后重试。 | 诊断 |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | 路由发布的目标实例没有和VPC关联。 | 诊断 |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | 指定的流量镜像源和会话不存在绑定关系。 | 诊断 |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | 指定的连界路由器 VBR 未关联到 BondRI,请确认后重试. | 诊断 |
| ResourceNotAvailable | Resource you requested is not available in this region or zone. | 当前地域或可用区不支持创建交换机。 | 诊断 | |
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | 入参的region的可用区不可用。 | 诊断 |
| ResourceNotAvailable.Vpc | Resource you requested is not available in this region or zone. | 您请求的资源在在该地域或可用区中不可用。 | 诊断 | |
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | 带宽资源不足 | 诊断 |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | 资源不足：未找到匹配的CIDR块。 | 诊断 |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | 指定的资源不足 | 诊断 |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | 共享带宽包资源不足。 | 诊断 |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | Ipv6地址资源不足。 | 诊断 |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | 指定的IPv6网段资源不足。 | 诊断 |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | 诊断 |
| 400 | ResourceNotEnough.SwitchAvailableIps | The available private Ip number is not enough in your subnet. | 子网中可用的私网IP不足。 | 诊断 |
| 400 | ResourceNotFound | The specified resource %s is not found. | 特定资源不存在。 | 诊断 |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | 指定的资源不存在 | 诊断 |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | 当前接入点信息不存在，请核对后重试。 | 诊断 |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | BondRi Connection 不存在 | 诊断 |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | 指定的 BondRI 实例不存在。 | 诊断 |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | 操作失败，传入Cen资源不存在。 | 诊断 |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | 您添加的网段不存在。 | 诊断 |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | 指定的CidrReservation不存在，请确认 CidrReservation 的状态是否可用。 | 诊断 |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | 指定的VSwitchCidrReservation实例不存在。 | 诊断 |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | 您指定的 VSwitchCidrReservation 不存在，请确认 VSwitchCidrReservation的状态是否可用。 | 诊断 |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | 网段不存在。 | 诊断 |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | 指定的ECS实例不存在。 | 诊断 |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | 传入的连续EIP组实例不存在。 | 诊断 |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | 找不到指定的%s资源。 | 诊断 |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of %s is not found. | 没有找到该FullNatEntry。 | 诊断 |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | 没有找到该full nat entry。 | 诊断 |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | NAT网关没有full nat 表。 | 诊断 |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | FullNat表不存在 | 诊断 |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | 指定的GatewayEndpoint不存在 | 诊断 |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | 未找到GatewayLoadBalancerEndpoint实例。 | 诊断 |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | 无法找到指定的网关路由表 | 诊断 |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | 下一跳实例不存在 | 诊断 |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | 绑定资源不存在。 | 诊断 |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | 找不到指定的IP。 | 诊断 |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | 依赖资源IPAM Pool不存在。 | 诊断 |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | 未找到指定的Ipv4网关，无法删除 | 诊断 |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | 传入的IPv4网关实例不存在。 | 诊断 |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | 您指定的Ipv6Address不存在，请检查您的输入是否正确 | 诊断 |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | 指定的IPv6仅主动出规则实例不存在。 | 诊断 |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | 传入的IPv6网关实例不存在。 | 诊断 |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | 指定的IPv6实例ID不存在，请检查您的输入是否正确 | 诊断 |
| 404 | ResourceNotFound.NatGateway | The NatGateway instance not exist. | 此nat网关不存在 | 诊断 |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | 指定的 NAT 网关不存在。 | 诊断 |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | NatIp资源找不到。 | 诊断 |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | 找不到指定的%s资源。 | 诊断 |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | 指定的网卡不存在。 | 诊断 |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | 下一跳弹性网卡不存在 | 诊断 |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | 指定的NetworkInterface %s 不存在 | 诊断 |
| 400 | ResourceNotFound.NetworkInterfaceId | The specified resource is not found. | 该资源没有找到。 | 诊断 |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | 下一跳实例不存在 | 诊断 |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | 物理专线不存在 | 诊断 |
| 400 | ResourceNotFound.PhysicalConnectionId | PhysicalConnection is not found. | PhysicalConnectionId未找到。 | 诊断 |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified PhysicalConnectionId [%s] is not found. | PhysicalConnectionId未找到。 | 诊断 |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified resource of [%s] is not found. | PhysicalConnection不存在。 | 诊断 |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | 输入的prefixList不存在 | 诊断 |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | PrefixList关联关系不存在。 | 诊断 |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | 指定的公网IP地址池实例不存在 | 诊断 |
| 400 | ResourceNotFound.QosTableIdOrNatGatewayId | natGatewayId and qosTableId can not both be null | natGatewayId and qosTableId 不能都为空 | 诊断 |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | 指定的路由条目不存在 | 诊断 |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | 网关路由表不存在 | 诊断 |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | 指定的SLB不存在。 | 诊断 |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | 指定的SNAT条目不存在。 | 诊断 |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | 指定的流量镜像目标实例不存在。 | 诊断 |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | 指定的流量镜像筛选条件不存在。 | 诊断 |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | 指定的流量镜像筛选规则不存在。 | 诊断 |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | 指定的流量镜像会话不存在。 | 诊断 |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | 虚拟边界路由器不存在 | 诊断 |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | 无法找到指定的VpcPeer | 诊断 |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | 指定的VSwitch实例不存在 | 诊断 |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | 您指定的 VSwitch 不存在，请确认 VSwitch 的状态是否可用。 | 诊断 |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | 指定的vSwitch不存在，请检查您的输入是否正确 | 诊断 |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | 弹性网卡所在的交换机不存在 | 诊断 |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | 依赖资源vSwitchCidrReservation不存在 | 诊断 |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | 输入的资源不在输入的资源组内 | 诊断 |
| 400 | ResourceQueryError | The specified resource is queried error. | 查询指定的资源时出错。 | 诊断 |
| 400 | ResourceQuotaExceeded.NatQosEntry | The specified natGateway qosEntry quota exceed. | 此NatGateway保护性限速条目数已经达到配额。 | 诊断 |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | 绑定实例处于中间状态。 | 诊断 |
| 400 | ResourceType.Unknown | Unknown ResourceType. | 资源类型不存在 | 诊断 |
| RISK.RISK_CONTROL_REJECTION | 账号被风控系统禁用。 | 诊断 | ||
| RI_CREATE_ONE_LIMIT_BY_SYNC | Create ri only one limit by sync. | 限制同步创建路由器接口。 | 诊断 | |
| 400 | RouteConflict | Route conflict exists in routing table. | 路由表中存在路由冲突。 | 诊断 |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | 路由表中存在路由冲突。 | 诊断 |
| RouterEntryConflict.Duplicated | A route entry already exists | 该路由条目已存在。 | 诊断 | |
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | 存在指向路由器接口的路由导致无法删除 | 诊断 |
| ROUTER_INTERFACE_REFERED_BY_ROUTEENTRY | The specified VlanInterface has been used by routeEntry. | 该VLAN接口已经使用在路由条目中。 | 诊断 | |
| 400 | RuleExist | The rule already exists. | 规则已存在。 | 诊断 |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | 安全组不存在于此VPC。 | 诊断 |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | 安全组已经被托管，不能使用 | 诊断 |
| 400 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | 请求失败，因为临时服务器故障。 | 诊断 |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | 指定的签名随机数已经被使用 | 诊断 |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | 资源组ID数目超限 | 诊断 |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | 标签数量超限 | 诊断 |
| SNAT_IP_POOL_COUNT_TOO_MANY | The Snat pool ip too many. | SNAT IP池的IP达到配额。 | 诊断 | |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | SLS源项目或日志库不存在。 | 诊断 |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | 当前VPN实例版本不支持使用IDaaS2.0。 | 诊断 |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | 添加指向客户端网段的路由失败，请查看VPC路由条目及相关配额。 | 诊断 |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | 指定VPN网关的SSL VPN服务器已存在。 | 诊断 |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | SSL VPN 服务端端口号需要在[1-65535]之间。 | 诊断 |
| 500 | SystemBusy | The system is busy. Please try again later. | 当前系统繁忙，请稍后重试。 | 诊断 |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | 过滤参数中Key的个数不允许超过5个。 | 诊断 |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | 过滤参数中一个Key里面的Value个数不能超过5个。 | 诊断 |
| TaskConflict | The eip operate too frequent | EIP操作太频繁。 | 诊断 | |
| 400 | TaskConflict | The operation is too frequent. Please wait a moment and try again. | 当前操作太频繁，请稍后重试。 | 诊断 |
| 400 | TaskConflict | The operation is too frequent. Please try again later. | 操作过于频繁，请稍后重试。 | 诊断 |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | 操作过于频繁，任务冲突。 | 诊断 |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | 操作太频繁，请稍后重试 | 诊断 |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | 操作过于频繁，请稍等一会再重试 | 诊断 |
| TaskConflict.AssociateGlobalAccelerationInstance | Operate too frequent. | 操作过于频繁。 | 诊断 | |
| Throttling | Request was denied due to request throttling. | 您这个时段的流量已经超限。如果不能满足现有业务要求可以提工单进行申请。 | 诊断 | |
| 400 | Throttling.User | Request was denied due to user flow control. | 由于用户端流控，请求被拒绝 | 诊断 |
| 400 | Unauthorized | This api does not support sub user or role. | 此API不支持子用户或角色。 | 诊断 |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | 指定的Ipv6网段不可用。 | 诊断 |
| UnknownError | The request processing has failed due to some unknown error. | 未知错误，请重试操作，错误仍存在请提交工单处理。 | 诊断 | |
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | VPC NAT的AccessMode.ModeValue属性不支持此操作 | 诊断 |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | 当前地域不支持指定Zone创建实例 | 诊断 |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | 云盒不支持创建高可用vip。 | 诊断 |
| 400 | UnsupportedFeature.CloudBoxIpv6 | The IPv6 feature is not supported by cloud box. | 云盒不支持创建IPv6。 | 诊断 |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | 目前不支持使用前缀列表创建Ecmp路由。 | 诊断 |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | DHCP选项集相关功能能在当前地域不生效。 | 诊断 |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | Eip绑定IpAddress特性不支持。 | 诊断 |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | 当前地域不支持EIP绑定PrefixIp | 诊断 |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | 当前实例不支持打开NAT网关会话日志。 | 诊断 |
| 400 | UnsupportedFeature.FwNatInMutilBindedEipBindType | The FW NAT in MUTIL_BINDED eip bind type is can not be created. | EIP绑定类型为MUTIL_BINDED的防护型不支持创建。 | 诊断 |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | 当前不支持创建Geneve模式的NAT网关。 | 诊断 |
| 400 | UnsupportedFeature.IcmpReplyEnabled | The feature of IcmpReplyEnabled is not supported. | Icmp 代答使能功能修改不支持。 | 诊断 |
| 400 | UnsupportedFeature.IndirectConvertForFwNat | The security protection enabled NAT gateway is not support change EIP bond type. | 开启防护功能的公网NAT不支持修改EIP绑定类型。 | 诊断 |
| 400 | UnsupportedFeature.IndirectConvertForVpcNat | The VPC NAT gateway is not support to change EIP bond type. | VPC NAT网关不支持修改EIP的绑定类型。 | 诊断 |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | 当前Ipv6实例为游离态，不支持所指定的付费类型，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | 当前指定Ipv6实例为单线ISP实例，不支持所指定的付费类型，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | 使用IPAM创建VPC特性不支持 | 诊断 |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | 该地域不支持IPAM功能。 | 诊断 |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | 创建ipv4网关失败，因为不支持ipv4网关特性 | 诊断 |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | 您指定的网关路由表暂不支持绑定该网关实例 | 诊断 |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | 指定的Ipv6Isp特性不支持。 | 诊断 |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | 输入的ipVersion不支持 | 诊断 |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | 您指定的Isp暂未支持 | 诊断 |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | 操作失败，因为当前地域不支持修改IPv6路由下一跳。 | 诊断 |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | 当前地域不支持修改路由下一跳功能。 | 诊断 |
| 400 | UnsupportedFeature.MutilBindedTypeNatEnableFw | The NAT with Mutil-Binded Eip bind type is not support enable firewall. | 以Mutil-Binded方式绑定EIP的NAT不允许开启防火墙。 | 诊断 |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | 不支持创建Nat带宽包。 | 诊断 |
| 400 | UnsupportedFeature.NatQosEntry | The specified natGateway can not support the qos entry feature. | 此NAT实例不支持保护性限速特性。 | 诊断 |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | 当前路由条目不支持修改下一跳信息。 | 诊断 |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | 操作不允许，因为路由的下一跳类型修改自Local类型。 | 诊断 |
| 400 | UnsupportedFeature.NormalNatModifyEipBindMode | The normal NAT gateway is not support to change EIP bond type. | 普通型NAT网关不支持修改EIP绑定类型。 | 诊断 |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | 指向普通类型NAT网关的路由条目不支持修改下一跳。 | 诊断 |
| 400 | UnsupportedFeature.PrivateLinkMode | The feature of %s is not supported. | 暂不支持反向访问特性。 | 诊断 |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | 指定的ReservedType未支持 | 诊断 |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | 您指定的ReservedType未支持，请根据请求参数规定重新输入 | 诊断 |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | 该路由器接口不支持ipv6 | 诊断 |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | 您指定的路由表类型不支持。 | 诊断 |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | 您指定的路由表类型不支持。 | 诊断 |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | 本用户暂不支持自定义流日志trafficPath功能。 | 诊断 |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | 你指定的VSwitch所在的VPC未支持高级特性，请更换其他VSwitch重试 | 诊断 |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | 该VPC不支持某些高级功能，请提交工单处理。 | 诊断 |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | VPC私网域名功能在当前地域不生效 | 诊断 |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | 指定的IPAM地址池不支持IPv6功能。 | 诊断 |
| 400 | UnsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not supported to enable security protection. | VPC NAT网关不支持开启安全防护。 | 诊断 |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | 不支持Vpconn类型。 | 诊断 |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | 此路由器接口对端是VPC，此地域不支持创建此类型下一跳的IPV6路由。 | 诊断 |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | 指定的VSwitch未开启Ipv6 | 诊断 |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | 您指定的VSwtich未开启Ipv6 | 诊断 |
| UnsupportedParameter | 参数不合法。 | 诊断 | ||
| 400 | UnsupportedRegion | The feature of prefixList entry is not supported in this region. | 本地域不支持操作prefixList路由 | 诊断 |
| 400 | UnsupportedRegion | The feature is not supported in current region. | 当前地域不支持该功能。 | 诊断 |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | 该地域不支持ipv4网关 | 诊断 |
| 400 | UnsupportedRegion | UnsupportedRegion | 当前Region未支持该特性 | 诊断 |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | 该地域不支持云盒公网。 | 诊断 |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | 该地域不支持PrefixList类型路由 | 诊断 |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | 该可用区不支持防护型NAT网关。 | 诊断 |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | 带宽超限 | 诊断 |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | 虚拟边界路由器带宽超过物理专线阈值。 | 诊断 |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | 当前的实例状态不支持该操作 | 诊断 |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | 当前该VCO 状态不支持进行修改，删除等操作。 | 诊断 |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | vlan id已经被使用 | 诊断 |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | 输入的共享物理专线没有关联虚拟边界路由器 | 诊断 |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | VLAN 0的共享物理专线不支持进行故障演练。 | 诊断 |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | 路由表中存在路由冲突 | 诊断 |
| VpcStatusError | The Vpc is creating . | 正在创建VPC。 | 诊断 | |
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | Vpc子网不存在。 | 诊断 |
| 400 | VpnConnection.Configuring | The specified service is configuring. | 服务正在配置中，请您稍后再试。 | 诊断 |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | 指定的服务欠费锁定。 | 诊断 |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | 主隧道和备隧道必须同时创建。 | 诊断 |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | 不支持同一个VPN下，不同的VPN连接在使用相同的用户网关场景下，配置了不同的Ike配置。 | 诊断 |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | 检测到多个IPsec连接关联了相同的VPN网关和用户网关，多个IPsec连接的预共享密钥和IKE阶段的配置参数需保持相同。 | 诊断 |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | 检测到多个IPsec连接关联了相同的VPN网关和用户网关，多个IPsec连接的感兴趣流网段不能重叠。 | 诊断 |
| VpnGateway.Configuring | The specified service is configuring. | 服务正在配置中，请您稍后再试。 | 诊断 | |
| 500 | VpnGateway.Configuring | The specified VPN gateway is being configured. | VPN网关正在配置中。 | 诊断 |
| VpnGateway.FinancialLocked | The specified service is financial locked. | 该服务已欠费，请您先充值再操作。 | 诊断 | |
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | 一个VPN网关不支持同时配置IPSec服务端与IPSec连接。 | 诊断 |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | Vpn网关没有开启IPsec VPN功能 | 诊断 |
| 400 | VpnGateway.SslVpnDisabled | The VPN gateway has not enabled SSL VPN. | VPN网关没有开启SSL VPN功能。 | 诊断 |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | 该VPN处于正在配置状态，请稍等一会再进行操作。 | 诊断 |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting pbr route entry priority. | 当前版本VPN网关不支持策略路由优先级功能。 | 诊断 |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | 当前版本的VPN不支持设置策略路由条目优先级 | 诊断 |
| 400 | VpnRouteEntry.AlreadyExists | The specified route entry is already exist. | 该路由已存在。 | 诊断 |
| 400 | VpnRouteEntry.BackupRoute | Validate backup route entry failed. | 主备路由条目校验失败。 | 诊断 |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | 指定的路由条目正在配置中。 | 诊断 |
| 400 | VpnRouteEntry.Conflict | The specified route entry has conflict. | 路由条目存在冲突。 | 诊断 |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | 指定的客户端 IP 池与 VPN 连接或 SSL 服务端冲突。 | 诊断 |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | 路由条目与SSL客户端冲突。 | 诊断 |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | 路由权重值不合法 | 诊断 |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | VPN网关不支持相同优先级下的多个策略路由源和目标网段同时重合。 | 诊断 |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | 双隧道类型的VPN网关不支持配置源网段与目标网段同时相同的策略路由。 | 诊断 |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | VPN网关不支持配置源网段、目标网段与权重同时相同的策略路由。 | 诊断 |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | Vpn操作存在冲突，请稍后重试。 | 诊断 |
| VpnUnderStock | There are not enough vpn gateways in stock | VPN网关库存不足。 | 诊断 | |
| 404 | VRouterId.NotFound | The VRouter not found. | 此VRouter实例未找到。 | 诊断 |
| VswitchStatusError | The VSwitch is creating . | 交换机正在创建中。 | 诊断 | |
| ZONE_NO_AVAILABLE_IP | The Zone have no available ip. | 该可用区没有可用IP。 | 诊断 | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | 绑定云服务类型实例的ipv6 ip 不能开通公网带宽。 | 诊断 |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | 流量镜像服务已开通，请勿重复操作。 | 诊断 |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Ipv4Prefix资源不足。 | 诊断 |
| 400 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | 资源Ipv4Prefix不存在。 | 诊断 |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | Ipv4Prefix和交换机预留网段不匹配。 | 诊断 |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | 参数NatIp不合法。 | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | 参数Ipv4Prefix不合法。 | 诊断 |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | Ipv4Prefix已经被分配。 | 诊断 |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | NatIp资源已经被分配。 | 诊断 |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | 缺失参数 DhcpOptionsSetId | 诊断 |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | 当前地域不支持路由目标组功能。 | 诊断 |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | 指定资源%s不存在。 | 诊断 |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | 缺少参数 MinRxInterval。配置 BFD 报文的时候需要同时配置发送间隔、接收间隔和检测时间倍数三个参数。 | 诊断 |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | 缺少参数 MinTxInterval。配置 BFD 报文的时候需要同时配置发送间隔、接收间隔和检测时间倍数三个参数。 | 诊断 |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | 缺少参数 DetectMultiplier。配置 BFD 报文的时候需要同时配置发送间隔、接收间隔和检测时间倍数三个参数。 | 诊断 |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | 您申请的资源不足，如仍需申请，请提工单处理 | 诊断 |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | 资源Ipv4Prefix不存在。 | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | Ipv4Prefix参数不合法，必须为/28网段。 | 诊断 |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp隶属于Ipv4Prefix不能单独删除,请直接删除Ipv4Prefix | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | 参数Ipv4Prefix不合法，必须为/28网段 | 诊断 |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp或Ipv4Prefix存在关联的SnatEntry，删除操作无法继续，请删除依赖的Snat后再重新删除。 | 诊断 |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | 资源Ipv4Prefix未找到，请检查该Ipv4Prefix是否存在。 | 诊断 |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | 已经创建过该Ipv4Prefix,请勿重新创建。 | 诊断 |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | 路由目标组配置实例禁止属于同一个可用区。 | 诊断 |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | 路由目标组配置的实例类型必须相同。 | 诊断 |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | 路由目标组所属的VPC和路由目标配置实例所属的VPC不一致。 | 诊断 |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | 禁止更新路由目标组中处于使能状态的成员。 | 诊断 |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | 路由目标组当前状态禁止操作。 | 诊断 |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | 禁止更新路由目标组成员中的实例类型。 | 诊断 |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | VPC关联的资源正在变配中，如云企业网等，稍后重试。 | 诊断 |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | 不允许托管网卡作为流量镜像的源. | 诊断 |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | vpc路由表项不存在 | 诊断 |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | 物理端口下存在边界路由器时不允许删除。 | 诊断 |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | 删除失败，需要共享端口或独享端口的用户去删除。 | 诊断 |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | 不允许执行该操作，因为当前物理端口不支持MPBGP和MPBGP-v6等高级能力。 | 诊断 |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | 如果前缀列表提升了最大条目数，会超过关联的网络ACL实例的最大条目数的配额。 | 诊断 |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | 您传入参数的前缀列表的 ip 版本和该前缀列表的实际 ip 版本不一致。 | 诊断 |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | 网关不支持Ipv4Prefix。 | 诊断 |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | Ipv4Prefix的配额使用溢出。 | 诊断 |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | NatIp和Ipv4Prefix配额使用溢出。 | 诊断 |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | 参数RelationKey缺失。 | 诊断 |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | 当前可用区正在裁撤，禁止在裁撤可用区创建交换机。 | 诊断 |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | 路由目标组成员实例禁止属于同一个可用区。 | 诊断 |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | 禁止更新路由目标组成员中的实例类型。 | 诊断 |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | 禁止更新路由目标组中已使能的成员。 | 诊断 |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | 网络ACL 正在与交换机绑定中或者解绑中 | 诊断 |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | 当前可用区已被禁用，不允许创建交换机。 | 诊断 |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | 禁止更新路由目标组中已使能的成员。 | 诊断 |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | 未使能成员处于健康检查异常状态时，禁止执行主备切换操作。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | 指定的RegionId不存在。请检查该参数是否正确。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The specified RegionId is not found. | 指定的RegionId不存在，请您检查此产品在该地域是否可用。 | 诊断 |
| 400 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | 该VPC已经开启ClassicLink。 | 诊断 |
| 400 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | 当前VPC还存在未删除的云产品实例，VPC删除失败。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist. | 指定的地域不存在。请检查该参数是否正确。 | 诊断 |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | 当前路由表的状态不支持删除操作 | 诊断 |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | ri不能附加cen | 诊断 |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | 参数错误 | 诊断 |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | 该VSwitch存在VSwitchCidrReservation使用中，不允许删除 | 诊断 |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | 当前Region不支持 | 诊断 |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | 无法解除系统路由表的关联。 | 诊断 |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | 操作与已存在的路由冲突，操作失败。 | 诊断 |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | 托管实例不允许进行该操作 | 诊断 |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | 已超出VPC内支持创建的路由目标组最大数量，请提升配额后操作。 | 诊断 |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | 双栈流日志实例暂不支持自定义trafficPath功能。 | 诊断 |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | 指定的eip分配token已过期 | 诊断 |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | 输入的VBR的VLAN为0，不支持进行故障演练，请使用物理专线进行故障演练。 | 诊断 |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | 指定的入参AccessIp和AccessDomain存在冲突 | 诊断 |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | 请求参数中AccessDomain参数不合法 | 诊断 |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | 指定的 vpn 网关上有Ipsec VPN 服务端未删除。 | 诊断 |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | 当前VPN实例不支持策略路由。 | 诊断 |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | 不支持创建大带宽的VpnAttachment。 | 诊断 |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | TunnelBandwidth参数非法。 | 诊断 |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | Ike加密算法以及IPsec加密算法中，des/3des不支持多算法兼容。 | 诊断 |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | 用户网关的ip与VPN网关ip冲突。 | 诊断 |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | Ikev1不支持IKE加密算法仅配置gcm16算法。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | 物理专线的状态不支持此操作。 | 诊断 |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | 当前物理专线不支持MACSec特性。 | 诊断 |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | 当前物理专线支持MACSec，但是不支持选择的加密算法 | 诊断 |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | 不允许进行操作因为有MACSec秘钥处于非稳态。 | 诊断 |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | 一条物理专线最多支持绑定3组MACSec秘钥。 | 诊断 |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | 需要解绑的Ckn不存在。 | 诊断 |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | 当前物理专线支持MACSec，但是不支持选择的加密算法。 | 诊断 |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | 当前操作被拒绝因为物理专线上还有MACSec秘钥绑定中。 | 诊断 |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | 当前资源仍被路由条目所依赖。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | 流量镜像会话的目的的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | 流量镜像会话的源的状态不正确 | 诊断 |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | 操作失败, 因为EIP未绑定到此NAT Gateway. | 诊断 |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | 操作失败, 因为SNAT规则IP地址池被添加到多个带宽包. | 诊断 |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | SNAT规则处于中间态, 或状态异常. 请稍后重试. | 诊断 |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | NatIp处于中间态, 请稍后重试. | 诊断 |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | 操作失败, 因为EIP未绑定此NAT网关. | 诊断 |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | 操作失败, 因为Snat规则IP地址池中的IP被添加到多个NAT带宽包. | 诊断 |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | 当前地域暂时不支持 | 诊断 |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | 创建NAT网关失败. | 诊断 |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | 路由表状态暂不支持此操作. 请稍后重试. | 诊断 |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | 当前可用区不支持配置FullNat规则域名形式。 | 诊断 |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | 当前实例不支持配置FullNat规则域名形式。 | 诊断 |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | 订单错误, 基础参数信息未完成. | 诊断 |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | 订单错误, 付费类型参数不可用. | 诊断 |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | 因不支持按量计费地域引起操作失败 | 诊断 |
| 400 | OperationUnsupported.User | The current user does not support this operation. | 当前用户不支持此操作. | 诊断 |
| 400 | Instance.NotFound | instance not found. | 实例不存在，或不属于当前用户。 | 诊断 |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | 操作失败, 因为Snat规则IP地址池中存在IP地址未添加共享带宽包. | 诊断 |
| 400 | NatInstance.NotFound | Instance not found. | 实例不存在，或不属于当前用户。 | 诊断 |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | 此操作不支持地域参数 | 诊断 |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | 不支持在95计费模式下查询当月流量数据。 | 诊断 |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | 鉴权策略格式异常 | 诊断 |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | 操作的资源已经被系统锁定，暂时无法操作。 | 诊断 |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | 参数冲突，设置IPv4网段后不支持指定创建IPv6单栈交换机 | 诊断 |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | 当前用户不允许创建单az nat | 诊断 |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | VPC关联到了专线网关%s，不允许删除。 | 诊断 |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | 端口高级能力暂时不支持，请确认后重试。 | 诊断 |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | EIP 绑定的 IP 地址对应的 VPC IPv4 网关未绑定任何网关路由表。 | 诊断 |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | 路由器接口关联的路由器ID不能为空，请检查后重试。 | 诊断 |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | 路由器接口状态异常。 | 诊断 |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | 无效的路由器类型。 | 诊断 |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | 指定的VPN网关上有 vpn 连接未删除。 | 诊断 |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | 参数Cidr的掩码或参数CidrMask小于地址池合规规则中的最小网络掩码长度。 | 诊断 |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | 参数Cidr的掩码或参数CidrMask超过了地址池合规规则中的最大网络掩码长度。 | 诊断 |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | NAT网关被路由目标组引用，禁止关闭ICMP代答功能。 | 诊断 |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | 当前NAT网关存在路由目标组引用，请先删除。 | 诊断 |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | ipv6路由的下一跳没有ipv6地址 | 诊断 |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | 路由目标组仅支持单AZ类型的NAT网关。 | 诊断 |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | 路由目标组中的NAT网关必须开启ICMP代回功能，确保ICMP探测报文可被正常响应。 | 诊断 |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | 该地域暂不支持将NAT网关作为路由目标组成员。 | 诊断 |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | 创建或修改路由目标组时，未发现所选的NAT网关资源。 | 诊断 |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | 未找到所选NAT网关关联的VSwitch信息。 | 诊断 |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | 当前操作不支持成员为NAT网关类型的路由目标组。 | 诊断 |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | IP不存在 | 诊断 |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | 参数 EcrInstanceId 缺失。 | 诊断 |
该文章对您有帮助吗？