System setup

Updated at:

This topic describes how to build a CloudESL system.

Procedure

  1. Create an Alibaba Cloud account.

    Official website: https://www.aliyun.com.

    Note

    You can skip this step if you already have an Alibaba Cloud account.

  2. Apply to join the public preview.

    Note

    You are required to apply only the first time you use the CloudESL system.

    Log on to the CloudESL console using your Alibaba Cloud account.

    The Apply for Public Preview message appears. Click the following link to apply for the public preview. Your application is sent to the sales personnel of Alibaba Cloud. https://yida.alibaba-inc.com/s/iotxuqiusouji?spm=5176.23348676.J_2883378880.3.4795958eb2LfrH#/

    After your application is approved, you can log on to the CloudESL console to configure CloudESL.

  3. Create a RAM user.

    For the steps to create a RAM user, see Permission Management.

  4. Create an AccessKey pair for the RAM user.

    Important

    An AccessKey pair consists of an AccessKey ID and an AccessKey secret. It is your credential for accessing Alibaba Cloud APIs and grants full permissions to your account. Keep your AccessKey pair secure. To prevent security threats, do not expose your AccessKey pair on public channels, such as GitHub. For security, follow Alibaba Cloud best practices and use the AccessKey pair of a RAM user to make API calls.

    1. Log on to the Resource Access Management (RAM) console using your Alibaba Cloud account or a RAM user that belongs to the administrator group. Hover over the profile picture and click AccessKey Management.

    2. Click Use AccessKey of RAM User.

    3. Create a user or use an existing user as needed.

      Important

      To access the CloudESL system by making OpenAPI calls, select Programmatic Access.

    4. In the navigation pane, choose Identity Management > Users. On the Users page, find and click the name of the target user, and then click Create AccessKey.

      Important

      Keep the AccessKey pair secure.

  5. Import a commodity library.

    Use the AccessKey pair that you created in Step 4 to import the product library into the CloudESL system. For more information, see Import a product library.

  6. Attach a base station.

    1. You can add a base station. For more information, see Add a base station.

    2. Activate the base station. For more information, see Activate the base station.

    3. Connect the AP to the network of a store.

      • If the AP supports Power over Ethernet (PoE), use a network cable to connect the AP to a switch. Plug one end of the cable into a network port on the switch and the other end into the yellow WAN/PoE port on the AP.

      • If the AP does not support PoE, first, power on the PoE power supply module. Then, use network cables to connect the AP to a switch.

        1. Use a network cable to connect the yellow WAN/PoE port of the AP to the PoE port of the PoE power supply module.

        2. Use another network cable to connect the LAN port of the PoE power supply module to a network port on the switch.

      If the AP's power indicator is steady on, the AP is connected to the network and you can manage electronic shelf labels (ESLs). If the power indicator blinks, the AP cannot connect to the Internet. Contact the on-site IT engineer to check whether the network uses dynamic IP address assignment or has access restrictions.

      The following describes the common statuses of the base station power indicator:

      Blink interval

      Cause

      Steady on

      Operating normally

      50 ms

      No IP address

      200 ms

      Cannot connect to the gateway

      1000 ms

      Cannot connect to the Internet

      2000 ms

      Domain Name System (DNS) error

      4000 ms

      Cannot connect to the cloud for other reasons

      Off

      Not powered on

  7. Manage electronic shelf labels (ESLs).

    • Bind an ESL in the CloudESL system.

      Log on to the CloudESL console. In the navigation pane, choose Business Management > Binding Management. Select the target store, click Add Binding, enter the Product Barcode and ESL Barcode, and then click Submit to complete the binding.

    • Bind an ESL using a personal digital assistant (PDA) device.

      For more information, see Use CloudESL in a store.

    • Bind an ESL using the DingTalk mini program.