Quick BI supports pushing alert messages through Feishu robots. You can create a reusable Feishu robot channel and reference it across multiple metric monitoring alerts, eliminating the need to configure webhook details repeatedly.
Prerequisites
You have added a Feishu robot to the target Feishu group.
Background information
When you configure metric monitoring alerts and select Feishu Group as the Alert Method, you must configure the Robot Webhook and Key. Repeating this configuration for every monitoring metric that targets the same group robot is time-consuming. With the enterprise robot channel feature, you add the webhook details once and then select the channel whenever you set up metric monitoring alerts.
Create a Feishu robot channel
-
Log on to the Quick BI console .
-
On the Quick BI home page, navigate to the Create Feishu Group Webhook page as shown in the following figure.
-
In the Create Feishu Group Webhook dialog box, configure the following parameters.
Parameter
Description
Name
Enter a name for the Feishu group robot.
If you have multiple Feishu group robots, use the
Feishu Group Name_Robot Nameformat to distinguish them.Enterprise Source
Select the enterprise that the Feishu robot belongs to. Click the drop-down
icon and select the Feishu organization from the list.URL
Enter the webhook address of the target Feishu group robot.
NoteFor more information about how to obtain the webhook address of a Feishu group robot, see How to set up a group robot in Feishu.
Signature
If your messages contain sensitive internal information, configure a signature to ensure that messages are sent securely.
-
Click Save And Test.
After you save the channel, the new Feishu group robot appears in the robot channel list.
Configure the Feishu robot in the push channel for receiving alerts
After you configure metric monitoring, add the Feishu robot you created to a custom push channel to receive alerts.
-
On the Quick BI home page, navigate to the metric monitoring page as shown in the following figure.
-
In the Monitoring Alert Settings > Push Message Settings dialog box, set the Push Channel parameter to Feishu and select an audience group. You can then select the Feishu robot that you created.
