错误码
|
HTTP status code |
错误码 |
错误信息 |
描述 |
操作 |
| 404 | ResourceNotFound.VPC | The specified resource of %s is not found. | 指定的VPC不存在。 | 诊断 |
| 400 | IllegalParam.TagValue | The param of %s is illegal. | TagValue参数值非法。 | 诊断 |
| 400 | IllegalParam.TagKey | The param of %s is illegal. | TagKey参数值非法。 | 诊断 |
| 400 | MissingParam.TagValue | The parameter TagValue is mandatory. | TagValue参数缺失。 | 诊断 |
| 400 | MissingParam.TagKey | The parameter TagKey is mandatory. | TagKey参数缺失。 | 诊断 |
| 400 | IllegalParam.AliUid | The param of %s is illegal. | AliUid参数值非法。 | 诊断 |
| 400 | Conflict.VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr | The VSwitchCidrReservationMaskAndVSwitchCidrReservationCidr [%s] is conflict. | VSwitchCidrReservationMask与VSwitchCidrReservationCidr不匹配。 | 诊断 |
| 400 | IllegalParam.Ipv6LeaseTime | Ipv6LeaseTime [%s] is illegal. | 指定的Ipv6LeaseTime参数不合法 | 诊断 |
| 400 | OperationDenied.UnsupportedUpdateCloudServiceRoute | The operation is not allowed because the account is not authorized to update the cloud service routes of the VPC. | 该操作不被允许，因为当前账号没有更新VPC云服务路由的权限。 | 诊断 |
| 400 | OperationDenied.CidrConflictWithExistCidr | The operation is not allowed because the cloud service route CIDR block to be added conflicts with the existing route entry. | 该操作不被允许，因为待添加的云服务路由网段与已有路由条目%s冲突。 | 诊断 |
| 400 | OperationDenied.UnsupportedEssentialOnlyRouteMode | The operation is not allowed because the account is not authorized to use the EssentialOnly route mode. | 该操作不被允许，因为当前账号没有使用EssentialOnly路由模式的权限。 | 诊断 |
| 400 | OperationDenied.CloudBoxVSwitchNotExist | The specified cloud box VSwitch does not exist in the opposite VPC. Please ensure the opposite VPC has a cloud box VSwitch before creating the router interface. | 对端VPC中不存在指定的云盒VSwitch。请在创建路由器接口前确保对端VPC中存在云盒VSwitch。 | 诊断 |
| 400 | OperationFailed.VbrNotEnableIpv6 | IPv6 is not enabled for the specified VirtualBorderRouter. Please enable IPv6 on the VBR before configuring IPv6 addresses. | 指定的边界路由器未开启IPv6功能。请先在VBR上启用IPv6后再配置IPv6地址。 | 诊断 |
| 400 | OperationFailed.VbrAttachCenOrEcrOnlyStableStatus | The VirtualBorderRouter is currently attaching to CEN or ECR and is in a transitional state. Please wait until the attachment reaches a stable status before retrying. | 边界路由器当前正在关联CEN或ECR，处于中间态。请等待关联操作到达稳定状态后再重试。 | 诊断 |
| 400 | UnsupportedFeature.FlowEncryption | The flow log does not support subscription flow-encryption fields. | 流日志暂不支持订阅flow-encryption字段 | 诊断 |
| 400 | UnsupportedFeature.LogFormatNisTrafficAnalyze | The flow log for which NIS traffic analysis is enabled does not support custom subscription fields. | 开启了NIS流量分析的流日志，暂不支持自定义订阅字段 | 诊断 |
| 400 | UnsupportedFeature.LogFormat | The ability to customize subscription fields for flow logs is not yet available, so stay tuned. | 流日志自定义订阅字段的功能尚未开放，敬请期待。 | 诊断 |
| 400 | OperationDenied.NisRequiredFieldMissing | Required fields required by NIS Traffic Analyzer are not subscribed. | 未订阅NIS流量分析器所需要的必选字段。 | 诊断 |
| 400 | OperationDenied.UnsupportedField | LogFormat contains unsupported fields. | LogFormat包含了不支持的字段 | 诊断 |
| 400 | IllegalParam.LogFormat | The specified parameter of LogFormat is invalid. | 指定的LogFormat参数非法 | 诊断 |
| 400 | InvalidParam.RouterInstanceOrRouterId | The parameters routerInstanceId and routerId are mutually exclusive. Please use either routerInstanceId alone, or routerType with routerId. | 请求包含冲突的参数。您需要仅提供 routerInstanceId,或同时提供 routerType 和 routerId。请从请求中移除冲突的参数组合。 | 诊断 |
| 400 | OperationDenied.PrefixList | The prefix list is created by ECS and cannot be modified via VPC API. | 该前缀列表由 ECS 创建，无法通过 VPC API 修改。 | 诊断 |
| 400 | IncorrectStatus.RouteTableStatus | Route table [%s] status [%s] is not stable. Please try again later. | 路由表[%s]状态[%s]未处于稳态. 请稍后重试. | 诊断 |
| 400 | DependencyViolation.NATGW | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | 当前VSwitch还存在未删除的NAT网关，VSwitch删除失败，请先删除该VSwitch下的NAT网关后再删除VSwitch。 | 诊断 |
| 500 | ParamExclusive.SourceVSwitchIdAndsourceCIDR | Parameters sourceVSwitchId and sourceCIDR are conflicted. | 参数sourceVSwitchId 和 sourceCIDR 冲突, 只能输入其中一个参数. | 诊断 |
| 400 | IllegalParam.OriginalCidr | The specified OriginalCidr is not a valid IPv4 CIDR block. | 指定的OriginalCidr不是合法的IPv4网段。 | 诊断 |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | 操作被禁止，因为该资源为共享资源。 | 诊断 |
| 400 | OperationDenied.HasSecondaryZone | The operation is not allowed because the VSwitch has a secondary zone. | 操作不被允许，因为该交换机具有备用可用区。 | 诊断 |
| 400 | OperationDenied.VpcIpv6CidrBlockNotExist | The specified VpcIpv6CidrBlock does not exist in the VPC. | 指定的VpcIpv6CidrBlock不存在于VPC中。 | 诊断 |
| 400 | OperationDenied.AvailableCidrInsufficient | Insufficient available CIDR blocks for allocation. This is either because the VPC has no remaining address space, or because the candidate CIDR contains destination networks of active non-system routes in the VPC. | 可用 CIDR 块不足，无法分配。原因可能是 VPC 地址空间已耗尽，或者候选 CIDR 包含了 VPC 内生效的非系统路由的目标网段。 | 诊断 |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The specified Ipv6CidrMask is invalid, only %s is allowed. | 指定的Ipv6CidrMask无效，仅允许%s。 | 诊断 |
| 400 | ParamExclusive.CidrBlockAndCidrMask | CidrBlock and CidrMask are mutually exclusive. | CidrBlock和CidrMask参数互斥。 | 诊断 |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Ipv6CidrBlock or Ipv6CidrMask must be specified. | 必须指定Ipv6CidrBlock或Ipv6CidrMask。 | 诊断 |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask must be specified. | 必须指定CidrBlock或CidrMask。 | 诊断 |
| 400 | CalculateNatCapacity.CpsNotPositive | Cps must be positive. | Cps必须是正数。 | 诊断 |
| 400 | CalculateNatCapacity.PpsNotPositive | Pps must be positive. | Pps必须是正数。 | 诊断 |
| 400 | CalculateNatCapacity.BandwidthNotPositive | Bandwidth must be positive. | 带宽必须是正数。 | 诊断 |
| 400 | CalculateNatCapacity.MetricRequired | PerformanceValues must have at least one field when CapacityUnits is not provided. | 必须输入任意指标。 | 诊断 |
| 400 | CalculateNatCapacity.InputRequired | Either NatGatewayCapacity.CapacityUnits or PerformanceValues must be provided. | 需要输入Cu或指标值。 | 诊断 |
| 400 | InvalidCu.NotPositive | CapacityUnits must be positive. | 输入的CU必须是正数。 | 诊断 |
| 400 | InvalidCu.ExceedMaximum | CU %s exceeds maximum %s. | CU超过最大限制。 | 诊断 |
| 400 | InvalidCu.BelowMinimum | CU %s is below minimum %s. | CU小于最小限制。 | 诊断 |
| 400 | EquivalentCuExceeds.Maximum | Equivalent CU %s exceeds maximum %s. | 等效CU数超过最大上限。 | 诊断 |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | 地址池IP数量配额超限，如需要提升配额请提工单或联系您的客户经理。 | 诊断 |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | Eip 数量配额超限，如需要提升配额请提工单或联系您的客户经理。 | 诊断 |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | Local ISP的必须在创建30天后才能释放，如您要删除请在30天后再操作。 | 诊断 |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | 物理专线当前业务状态不支持操作 | 诊断 |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | 当前地域未开启状态切换延迟命令特性开关 | 诊断 |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | 接入设备不支持LinkDelay特性 | 诊断 |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | 状态切换延迟参数值非法 | 诊断 |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | 共享专线不支持配置状态切换延迟命令 | 诊断 |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | 状态切换延迟命令暂不支持 | 诊断 |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | 指定的原始网段不是VPC的主网段或附加网段。 | 诊断 |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | 交换机存在备可用区时不允许操作IPv6。 | 诊断 |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | Ipv6Only模式下不允许指定CidrBlock或CidrMask。 | 诊断 |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | VPC没有可用的CIDR空间可供分配。 | 诊断 |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | 指定的IPv6掩码非法，仅支持%s。 | 诊断 |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock和Ipv6CidrMask不能同时指定。 | 诊断 |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | 必须指定Ipv6CidrBlock或Ipv6CidrMask中的至少一个。 | 诊断 |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | 必须指定CidrBlock或CidrMask中的至少一个。 | 诊断 |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock和CidrMask不能同时指定。 | 诊断 |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | 指定的IPv6运营商%s与IPAM地址池的IPv6运营商%s不匹配。 | 诊断 |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | 创建物理专线失败，没有排除冗余专线后符合条件的接入设备。 | 诊断 |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | 创建物理专线失败，没有符合输入的光模块的接入设备。 | 诊断 |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | 创建物理专线失败，没有符合设备高级能力的接入设备。 | 诊断 |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | 参数CidrBlock和SecondaryCidrBlock互斥，不能同时指定。 | 诊断 |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | 操作被拒绝，缩小后的目标网段未覆盖现有交换机网段%s。 | 诊断 |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | 操作被拒绝，扩大后的目标网段与VPC的现有网段%s重叠。 | 诊断 |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | 操作被拒绝，目标网段与原始网段没有重叠，网段调整要求两者存在重叠关系。 | 诊断 |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | 操作被拒绝，目标网段与原始网段相同，无需修改。 | 诊断 |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | 操作被拒绝，指定的附加网段在当前VPC中不存在。 | 诊断 |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | 修改附加网段时必须指定NewSecondaryCidrBlock参数。 | 诊断 |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | 缺少必要参数，CidrBlock和SecondaryCidrBlock至少需要指定一个。 | 诊断 |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | 备可用区虚拟交换机所在可用区不支持创建双隧道VPN，请更换虚拟交换机。 | 诊断 |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | 参数DisasterRecoveryVSwitchId缺失。 | 诊断 |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | 该交换机在该地域内不存在。 | 诊断 |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber仅在Prefix预留类型下支持。 | 诊断 |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | IpPrefixNumber、VSwitchCidrReservationMask或VSwitchCidrReservationCidr中必须指定一个。 | 诊断 |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber不能与VSwitchCidrReservationCidr或VSwitchCidrReservationMask同时使用。 | 诊断 |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | 深分页跳页次数已触发限流。请降低深翻页跳页的频率，或使用顺序分页。 | 诊断 |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | IPSec连接开启BGP时，需要用户网关上配置ASN。 | 诊断 |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | 指定的策略路由不存在。 | 诊断 |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | 参数 OwnerId 无效，请确认参数是否正确后重试。 | 诊断 |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | 参数 EcrInstanceId 缺失。 | 诊断 |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | IP不存在 | 诊断 |
| 400 | OperationFailed.Ipv6OnlyVSwitch | The operation is failed because the specified VSwitch is Ipv6 only. | 操作失败，因为指定的VSwitch为Ipv6 Only类型。 | 诊断 |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | 创建或修改路由目标组时，未发现所选的NAT网关资源。 | 诊断 |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | 当前操作不支持成员为NAT网关类型的路由目标组。 | 诊断 |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | 未找到所选NAT网关关联的VSwitch信息。 | 诊断 |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | 该地域暂不支持将NAT网关作为路由目标组成员。 | 诊断 |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | 路由目标组中的NAT网关必须开启ICMP代回功能，确保ICMP探测报文可被正常响应。 | 诊断 |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | 路由目标组仅支持单AZ类型的NAT网关。 | 诊断 |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | ipv6路由的下一跳没有ipv6地址 | 诊断 |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | 当前NAT网关存在路由目标组引用，请先删除。 | 诊断 |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | NAT网关被路由目标组引用，禁止关闭ICMP代答功能。 | 诊断 |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | 参数Cidr的掩码或参数CidrMask小于地址池合规规则中的最小网络掩码长度。 | 诊断 |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | 参数Cidr的掩码或参数CidrMask超过了地址池合规规则中的最大网络掩码长度。 | 诊断 |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | 指定的VPN网关上有 vpn 连接未删除。 | 诊断 |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | 无效的路由器类型。 | 诊断 |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | 路由器接口状态异常。 | 诊断 |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | 路由器接口关联的路由器ID不能为空，请检查后重试。 | 诊断 |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | EIP 绑定的 IP 地址对应的 VPC IPv4 网关未绑定任何网关路由表。 | 诊断 |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | 端口高级能力暂时不支持，请确认后重试。 | 诊断 |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | VPC关联到了专线网关%s，不允许删除。 | 诊断 |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | 当前用户不允许创建单az nat | 诊断 |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | 参数冲突，设置IPv4网段后不支持指定创建IPv6单栈交换机 | 诊断 |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | 操作的资源已经被系统锁定，暂时无法操作。 | 诊断 |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | 鉴权策略格式异常 | 诊断 |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | 不支持在95计费模式下查询当月流量数据。 | 诊断 |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | 此操作不支持地域参数 | 诊断 |
| 400 | NatInstance.NotFound | Instance not found. | 实例不存在，或不属于当前用户。 | 诊断 |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | 操作失败, 因为Snat规则IP地址池中存在IP地址未添加共享带宽包. | 诊断 |
| 400 | Instance.NotFound | instance not found. | 实例不存在，或不属于当前用户。 | 诊断 |
| 400 | OperationUnsupported.User | The current user does not support this operation. | 当前用户不支持此操作. | 诊断 |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | 因不支持按量计费地域引起操作失败 | 诊断 |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | 订单错误, 付费类型参数不可用. | 诊断 |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | 订单错误, 基础参数信息未完成. | 诊断 |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | 当前实例不支持配置FullNat规则域名形式。 | 诊断 |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | 当前可用区不支持配置FullNat规则域名形式。 | 诊断 |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | 路由表状态暂不支持此操作. 请稍后重试. | 诊断 |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | 创建NAT网关失败. | 诊断 |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | 当前地域暂时不支持 | 诊断 |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | 操作失败, 因为Snat规则IP地址池中的IP被添加到多个NAT带宽包. | 诊断 |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | 操作失败, 因为EIP未绑定此NAT网关. | 诊断 |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | NatIp处于中间态, 请稍后重试. | 诊断 |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | SNAT规则处于中间态, 或状态异常. 请稍后重试. | 诊断 |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | 操作失败, 因为SNAT规则IP地址池被添加到多个带宽包. | 诊断 |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | 操作失败, 因为EIP未绑定到此NAT Gateway. | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | 流量镜像会话的源的状态不正确 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | 流量镜像会话的目的的状态不正确。 | 诊断 |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | 当前资源仍被路由条目所依赖。 | 诊断 |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | 当前操作被拒绝因为物理专线上还有MACSec秘钥绑定中。 | 诊断 |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | 当前物理专线支持MACSec，但是不支持选择的加密算法。 | 诊断 |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | 需要解绑的Ckn不存在。 | 诊断 |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | 一条物理专线最多支持绑定3组MACSec秘钥。 | 诊断 |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | 不允许进行操作因为有MACSec秘钥处于非稳态。 | 诊断 |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | 当前物理专线支持MACSec，但是不支持选择的加密算法 | 诊断 |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | 当前物理专线不支持MACSec特性。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | 物理专线的状态不支持此操作。 | 诊断 |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | Ikev1不支持IKE加密算法仅配置gcm16算法。 | 诊断 |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | 用户网关的ip与VPN网关ip冲突。 | 诊断 |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | Ike加密算法以及IPsec加密算法中，des/3des不支持多算法兼容。 | 诊断 |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | TunnelBandwidth参数非法。 | 诊断 |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | 不支持创建大带宽的VpnAttachment。 | 诊断 |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | 当前VPN实例不支持策略路由。 | 诊断 |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | 指定的 vpn 网关上有Ipsec VPN 服务端未删除。 | 诊断 |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | 请求参数中AccessDomain参数不合法 | 诊断 |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | 指定的入参AccessIp和AccessDomain存在冲突 | 诊断 |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | 输入的VBR的VLAN为0，不支持进行故障演练，请使用物理专线进行故障演练。 | 诊断 |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | 指定的eip分配token已过期 | 诊断 |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | 双栈流日志实例暂不支持自定义trafficPath功能。 | 诊断 |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | 已超出VPC内支持创建的路由目标组最大数量，请提升配额后操作。 | 诊断 |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | 未使能成员处于健康检查异常状态时，禁止执行主备切换操作。 | 诊断 |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | 禁止更新路由目标组中已使能的成员。 | 诊断 |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | 当前可用区已被禁用，不允许创建交换机。 | 诊断 |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | 网络ACL 正在与交换机绑定中或者解绑中 | 诊断 |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | 禁止更新路由目标组中已使能的成员。 | 诊断 |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | 路由目标组成员实例禁止属于同一个可用区。 | 诊断 |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | 禁止更新路由目标组成员中的实例类型。 | 诊断 |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | 当前可用区正在裁撤，禁止在裁撤可用区创建交换机。 | 诊断 |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | 参数RelationKey缺失。 | 诊断 |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | NatIp和Ipv4Prefix配额使用溢出。 | 诊断 |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | 网关不支持Ipv4Prefix。 | 诊断 |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | Ipv4Prefix的配额使用溢出。 | 诊断 |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | 您传入参数的前缀列表的 ip 版本和该前缀列表的实际 ip 版本不一致。 | 诊断 |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | 如果前缀列表提升了最大条目数，会超过关联的网络ACL实例的最大条目数的配额。 | 诊断 |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | 不允许执行该操作，因为当前物理端口不支持MPBGP和MPBGP-v6等高级能力。 | 诊断 |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | 删除失败，需要共享端口或独享端口的用户去删除。 | 诊断 |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | 物理端口下存在边界路由器时不允许删除。 | 诊断 |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | vpc路由表项不存在 | 诊断 |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | 不允许托管网卡作为流量镜像的源. | 诊断 |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | VPC关联的资源正在变配中，如云企业网等，稍后重试。 | 诊断 |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | 路由目标组所属的VPC和路由目标配置实例所属的VPC不一致。 | 诊断 |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | 路由目标组当前状态禁止操作。 | 诊断 |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | 禁止更新路由目标组成员中的实例类型。 | 诊断 |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | 禁止更新路由目标组中处于使能状态的成员。 | 诊断 |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | 路由目标组配置的实例类型必须相同。 | 诊断 |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | 路由目标组配置实例禁止属于同一个可用区。 | 诊断 |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | 已经创建过该Ipv4Prefix,请勿重新创建。 | 诊断 |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | 资源Ipv4Prefix未找到，请检查该Ipv4Prefix是否存在。 | 诊断 |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp或Ipv4Prefix存在关联的SnatEntry，删除操作无法继续，请删除依赖的Snat后再重新删除。 | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | 参数Ipv4Prefix不合法，必须为/28网段 | 诊断 |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp隶属于Ipv4Prefix不能单独删除,请直接删除Ipv4Prefix | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | Ipv4Prefix参数不合法，必须为/28网段。 | 诊断 |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | 缺少参数 DetectMultiplier。配置 BFD 报文的时候需要同时配置发送间隔、接收间隔和检测时间倍数三个参数。 | 诊断 |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | 缺少参数 MinTxInterval。配置 BFD 报文的时候需要同时配置发送间隔、接收间隔和检测时间倍数三个参数。 | 诊断 |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | 缺少参数 MinRxInterval。配置 BFD 报文的时候需要同时配置发送间隔、接收间隔和检测时间倍数三个参数。 | 诊断 |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | 指定资源%s不存在。 | 诊断 |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | 当前地域不支持路由目标组功能。 | 诊断 |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | 缺失参数 DhcpOptionsSetId | 诊断 |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | NatIp资源已经被分配。 | 诊断 |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | Ipv4Prefix已经被分配。 | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | 参数Ipv4Prefix不合法。 | 诊断 |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | 参数NatIp不合法。 | 诊断 |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | Ipv4Prefix和交换机预留网段不匹配。 | 诊断 |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | 流量镜像服务已开通，请勿重复操作。 | 诊断 |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | 绑定云服务类型实例的ipv6 ip 不能开通公网带宽。 | 诊断 |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Ipv4Prefix资源不足。 | 诊断 |
| 400 | OperationDenied.InvalidIpReservedByVSwitch | The specified ip address is the reserved address of the switch. | 指定的ip地址是交换机的预留地址 | 诊断 |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | 资源Ipv4Prefix不存在。 | 诊断 |
| 400 | UnsupportedFeature.JumboFrame | The jumbo frame feature is not supported in the current region. | 巨型帧特性在当前地域没有支持。 | 诊断 |
| 400 | ResourceInConfiguring.NodeId | The express connect router subinstance is not in a steady state and cannot operate. | 专线网关子实例当前不处于稳态，无法操作。 | 诊断 |
| 400 | IncorrectStatus.Ecr | The express connect router is not in a steady state and cannot operate. | 专线网关当前不处于稳态，无法操作。 | 诊断 |
| 400 | Forbidden.VpconnCrossBid | Not allow to create across bid virtual physical connection. | 不允许跨站点推送共享端口。 | 诊断 |
| 400 | OperationDenied.NotInWhiteList | User does not have permission to turn on jumbo frames. | 用户没有权限开启巨型帧。 | 诊断 |
| 400 | Mismatch.Ipv4PrefixAndNatIpCidr | The %s and %s are mismatched. | The Ipv4Prefix and NatIpCidr are mismatched. | 诊断 |
| 400 | MissingParam.BandwidthPackageId | The parameter bandwidthPackageId is mandatory. | 参数bandwidthPackageId是必需的。 | 诊断 |
| 400 | DuplicatedParam.ResourceIds | The parameter of ResourceIds contains duplicate values. | ResourceIds参数中包含重复的值。 | 诊断 |
| 400 | OperationFailed.ModifyEcmpRoute | Operation is failed because ecmp route can not modify. | 操作失败，因为ecmp路由不支持修改下一跳等属性 | 诊断 |
| 404 | InvalidEipId.NotFound | The specified EIP instance does not exist. | 指定的EIP实例不存在。 | 诊断 |
| 400 | OperationFailed.ConflictWithSecondaryCidr | The modified cidr is conflict with the secondary cidr. | 操作失败，修改后的CidrBlock与附加网段冲突。 | 诊断 |
| 400 | QuotaExceeded.SessionNumPerTarget | The quota of the number of traffic mirror sessions per target is exceeded. | 每个流量镜像目的所允许创建的会话的数量配额超限。 | 诊断 |
| 400 | IllegalParam.Protocol | The specified Protocol %s is invalid. | 协议参数不合法。 | 诊断 |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock %s is illegal. | 参数SourceCidrBlock非法。 | 诊断 |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock %s is illegal. | 参数DestinationCidrBlock非法。 | 诊断 |
| 400 | MissingParam.RouteTableId | The parameter RouteTableId is missing. | 缺少必填参数 RouteTableId。 | 诊断 |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | 参数PublicIpAddressPoolId缺失。 | 诊断 |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | 指定的网段掩码不合法。 | 诊断 |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | 当前不支持分配游离态私网IPv6地址。 | 诊断 |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | 当前操作不支持私网GUA地址。 | 诊断 |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | 指定的Ipv6Isp参数不合法。 | 诊断 |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | 输入的掩码或CIDR的掩码不在允许的范围内。 | 诊断 |
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | 网卡类型不能是Slave网卡。 | 诊断 |
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | VPC中的IPv6网段数超过了限制。 | 诊断 |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | 输入的IPv6网段和现有的网段重叠。 | 诊断 |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | 输入的IpVersion和输入的地址池的IpVersion不一致。 | 诊断 |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | 参数IpVersion缺失。 | 诊断 |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | Ipv6EgressRules数量配额超限 | 诊断 |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | 指定的IPv6实例已开通IPv6带宽，请释放IPv6带宽后在操作。 | 诊断 |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | DHCP选项集相关功能能在当前地域不生效。 | 诊断 |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | 您当前指定购买的实例类型需升级CDT计费，请升级CDT后重试 | 诊断 |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | 您指定的资源已经创建了采集全部场景的流量的流日志实例，不能再创建仅采集部分场景的流日志实例。 | 诊断 |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | 操作失败因为%s配额的限制。预留网段的掩码超过了当前IP Prefix的默认掩码，%s/%s。 | 诊断 |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | ProjectName和LogStoreName 参数传入非法，必须同时传入或者同时不传。 | 诊断 |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | 操作不支持，因为指定的路由下一跳实例绑定了多个IPv6地址 | 诊断 |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | 参数AssociatedInstanceId缺失 | 诊断 |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | 操作失败由于实例关联CEN | 诊断 |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | 操作失败，因为VPC中存在ipv6公网IP | 诊断 |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | 边界路由器已被锁定，请稍后重试。 | 诊断 |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | 当前资源与其它账号 VPC 或 CEN 绑定失败，请核对是否有相关权限后重试。 | 诊断 |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | 主隧道和备隧道必须同时创建。 | 诊断 |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | VPC最多只支持一个动态路由学习源，请将VPC从ECR中移除 | 诊断 |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | 架构不支持BGP能力（单隧道bonding架构vpn网关） | 诊断 |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | VPC系统路由表未开启接受传播路由 | 诊断 |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | BGP路由有残留，无法关闭路由自动传播。 | 诊断 |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | 参数DestinationCidrBlock非法。 | 诊断 |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | 参数SourceCidrBlock非法。 | 诊断 |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | VPC最多只支持一个动态路由学习源，请在转发路由器中关闭对该VPC的路由同步 | 诊断 |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_trafficmirror_public 无集团上云商品标签，不允许集团内部用户购买。 | 诊断 |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | 此IPv6网关[%s]下的地址[%s]开通了公网带宽，来自于共享用户[%s]，请删除后重试。 | 诊断 |
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | 流量镜像当前不支持完整报文镜像功能，TrafficMirrorSourceTruncateMode只能设置为0，即默认模式。 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | 当前流量镜像会话的目的类型不支持完整报文镜像功能。 | 诊断 |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | 路由表传播状态未进入稳态，请稍等后重试。 | 诊断 |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | 参数RouteEntries缺失 | 诊断 |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | 参数GatewayRouteTableId和Ipv4GatewayRouteTableId不能同时为空，建议您使用GatewayRouteTableId。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | 您所修改的Local路由所属的交换机正与当前路由表绑定，禁止修改其下一跳。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | 禁止修改系统路由表中的Local路由。 | 诊断 |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | 当前虚拟交换机未找到。 | 诊断 |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | 缺少必须传入的参数。 | 诊断 |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | 操作失败，该IPv6地址段已被使用。 | 诊断 |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | dns域名资源处于非稳态，请稍后重试。 | 诊断 |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | 请求缺少必要参数。您必须提供 RouteEntryId，或者同时提供RouteTableId和DestinationCidrBlock。 | 诊断 |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | 当前VPC还存在未删除的安全组[%s]，VPC删除失败，请先删除该VPC下的安全组后再删除VPC。 | 诊断 |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的资源[%s]依赖了[%s]，请先删除依赖资源后再操作。 | 诊断 |
| 400 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | 指定的RegionId不存在 | 诊断 |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | 指定的IPv6EgressOnlyRule未处于稳态。 | 诊断 |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | 参数BindInstanceId缺失。 | 诊断 |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | 流量镜像源不支持所输入的托管弹性网卡类型。 | 诊断 |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | 流量镜像目的不支持所输入的托管弹性网卡类型。 | 诊断 |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | VPC私网域名功能在当前地域不生效 | 诊断 |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | 操作失败，因为指定的弹性网卡和路由表不属于同一个Vpc | 诊断 |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | TrafficAnalyzerId与ProjectName和LogStoreName 参数都未传入。 | 诊断 |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | 参数VSwitchId缺失 | 诊断 |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | 操作失败，因为指定Vpc中存在Anycast弹性公网IP | 诊断 |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | Tr Attachment未开启Ipv6能力 | 诊断 |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | 可以绑定的多直通模式eip数目超过限制。 | 诊断 |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | 配置的NatIp已存在 | 诊断 |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | 资源所属用户ID参数输入非法. | 诊断 |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | 参数AssociatedInstanceId长度非法 | 诊断 |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | FlowLog的采样间隔大于NIS流量分析器的采样间隔。 | 诊断 |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | 指定的NIS流量分析器不存在。 | 诊断 |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | 在修改FlowLog实例的投递目的或者启停NIS流量分析时，指定了不被允许的投递类型。 | 诊断 |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | 指定的NIS流量分析器处于非开启状态。 | 诊断 |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | 您还未通过实名认证，不符合购买条件。请登录用户中心进行实名认证. | 诊断 |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | 参数AssociatedInstanceId非法。 | 诊断 |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | 默认DHCP选项集不允许修改。 | 诊断 |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | 参数Type非法。 | 诊断 |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | SNAT条目不能使用此EIP. 因为已经在DNAT条目(任意端口映射)中被使用. | 诊断 |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | 操作不支持, NAT实例架构不匹配. | 诊断 |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | ECS弹性网卡配额不满足要求. | 诊断 |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | 操作被拒绝，因为只有系统路由表支持发布路由 | 诊断 |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | 操作被拒绝，原因是CIDR在IPAM地址池中不可用。 | 诊断 |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | 传入的连续EIP组实例不存在。 | 诊断 |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | 交换机正在创建中。 | 诊断 |
| 400 | MissingParam.Resource | Missing parameter Resource. | 参数Resource缺失 | 诊断 |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | 指定的连界路由器 VBR 未关联到 BondRI,请确认后重试. | 诊断 |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | 未知错误，请重试操作，错误仍存在请提交工单处理。 | 诊断 |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | InstanceId不可以为空 | 诊断 |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | 无效的标签键值, 请指定有效的标签键值后重试。 | 诊断 |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | BondRi 状态在非稳态，请确认实例状态后重试。 | 诊断 |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | 操作不允许，因为路由的下一跳类型修改自Local类型。 | 诊断 |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | 操作失败，因为当前地域不支持修改IPv6路由下一跳。 | 诊断 |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | 当前vpn连接实例被跨账号授权到其他账号的CEN，删除时需要先解除跨账号授权。 | 诊断 |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | 创建双隧道VPN时入参的两个可用区应该不同。 | 诊断 |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | 双隧道容灾的可用区暂不支持使用。 | 诊断 |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | 入参的第一个可用区不可用。 | 诊断 |
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | 入参的region的可用区不可用。 | 诊断 |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | NAT网关实例不存在 | 诊断 |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | 操作失败，不允许配置限速。 | 诊断 |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | 后段服务查询网卡信息失败 | 诊断 |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | 输入的接入点不存在或者没有权限查看。 | 诊断 |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的资源[%s]依赖了IPv6预留网段，请先删除依赖资源后再操作。 | 诊断 |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | 当前VPC的私网域名状态不支持该操作。 | 诊断 |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | 您还未通过实名认证，不符合购买条件。请登录用户中心进行实名认证。 | 诊断 |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | 当前可用区NAT网关未开服, 或底层资源库存不足。 | 诊断 |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | NatIpCidr地址段已存在, 或者与已创建的地址段有重叠 | 诊断 |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | 输入参数NatIpCidr不合法 | 诊断 |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | 指定的入参AccessMode.ModeValue和AccessMode.TunnelType存在冲突 | 诊断 |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | 指定的入参PrivateLinkEnabled和AccessMode存在冲突 | 诊断 |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | 指定的入参PrivateLinkMode和AccessMode存在冲突 | 诊断 |
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | VPC NAT的AccessMode.ModeValue属性不支持此操作 | 诊断 |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | 请求参数中AccessMode.TunnelType参数不合法 | 诊断 |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | 请求参数中AccessMode.ModeValue参数不合法 | 诊断 |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | VPC NAT生成隧道ID失败, 请稍后重试 | 诊断 |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | DNAT条目不允许公网IP地址等于私网IP地址 | 诊断 |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的资源存在依赖关系依赖，请先解除关联。 | 诊断 |
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | 指定参数 OwnerAccount 不合法 | 诊断 |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | 参数TargetType非法。 | 诊断 |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | 已发布路由不支持创建主备路由或负载均衡路由。 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bond弹性网卡不支持作为镜像目的。 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | 网关型负载均衡终端节点不支持作为流量镜像目的。 | 诊断 |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | 账号余额不足 | 诊断 |
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | 销售模块参数不满足约束检查 | 诊断 |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | 指定的资源实例不存在 | 诊断 |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | 账号余额不足 | 诊断 |
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | 账号余额不足 | 诊断 |
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | 商品定价计划未找到 | 诊断 |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | 该VPC不支持某些高级功能，请提交工单处理。 | 诊断 |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | 指定的IPAM地址池不支持IPv6功能。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | 修改自定义路由表Local路由的下一跳时，该Local路由的目的网段恰好和路由表绑定的某个交换机的Cidr相等。 | 诊断 |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | 该VPC内存在低版本的路由表，请提交工单处理。 | 诊断 |
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | Eip实例与共享带宽的IpVersion不匹配。 | 诊断 |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | 修改local类型的路由下一跳时，传入了不支持的新的下一跳类型。 | 诊断 |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | 存在local类型的路由下一跳被修改了。 | 诊断 |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | 未找到GatewayLoadBalancerEndpoint实例。 | 诊断 |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | 此操作不支持因为一个VPC只能有一个IPv6网关。 | 诊断 |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | 只支持ULA类型的IPv6地址。 | 诊断 |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | 不支持此路由类型。 | 诊断 |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | 当前操作不支持ULA地址。 | 诊断 |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | VBR不支持IPv6路由。 | 诊断 |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | 当前操作不支持IPv6特性。 | 诊断 |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | IPv6不支持Ecmp路由。 | 诊断 |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | 不支持此IPv6CidrBlock。 | 诊断 |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | 指定地域尚未支持交换粒度的仅主动出规则。 | 诊断 |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | 免费版IPv6网关不支持创建仅主动出规则，请将IPv6网关升级为企业版或企业增强版。 | 诊断 |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | 当前操作不支持因为尚未开启IPv6功能。 | 诊断 |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | 当前操作不支持因为可用区Id不匹配。 | 诊断 |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | 操作失败，该IPv6地址段已被使用。 | 诊断 |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | 当前操作不支持因为VPC尚未开启IPv6。 | 诊断 |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | 操作失败，因为超出了备用路由条目的配额。 | 诊断 |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | 操作失败，不支持此活动路由条目的类型。 | 诊断 |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | 操作失败，因为超出了活动路由条目的配额。 | 诊断 |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | 该操作不受支持，因为IPv6实例没有公网带宽。 | 诊断 |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | 操作失败，IPv6实例的带宽超出了待修改网关规格的最大带宽限制。 | 诊断 |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | 操作失败，已开启IPv6。 | 诊断 |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | 操作失败，下一跳类型非法。 | 诊断 |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | 操作失败，已欠费。 | 诊断 |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | 操作失败，只有自定义路由条目才支持通过路由条目id或路由条目名进行过滤。 | 诊断 |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | 操作失败，该ri的对端类型对于ECMP是无效的。 | 诊断 |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | 操作失败，默认VPC不存在。 | 诊断 |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | 操作失败，新增CidrBlock与路由冲突。 | 诊断 |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | 此地域暂不支持L2 EIP绑定IP地址。 | 诊断 |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | 不通过 IPAM 地址池为 VPC 添加附加网段时，参数 SecondaryCidrBlock 和参数 Ipv6CidrBlock 必须输入一个且不能都输入。 | 诊断 |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | 参数EnableIpv6缺失。 | 诊断 |
| 400 | MissingParam.context | The param of context is missing. | 参数context缺失。 | 诊断 |
| 400 | MissingParam.bid | The param of bid is missing. | 参数bid缺失。 | 诊断 |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | 参数aliUid缺失。 | 诊断 |
| 400 | MissingParam | Miss mandatory parameter. | 缺少必要参数。 | 诊断 |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | 指定的VPC实例未找到。 | 诊断 |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | 指定的VPC实例未找到。 | 诊断 |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | 该Eni状态不支持该操作。 | 诊断 |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | 指定的附加网段未找到。 | 诊断 |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | 指定的路由表未找到。 | 诊断 |
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | 指定的EniInstanceId不合法。 | 诊断 |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | 指定的IPv6ULACidrBlock格式有误。 | 诊断 |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | 指定的IPv6实例未找到。 | 诊断 |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | 指定的IPv6GatewayId未找到。 | 诊断 |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | 指定的IPv6网关未找到。 | 诊断 |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | 指定的IPv6CidrBlock未找到。 | 诊断 |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | 指定的VPC未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | 指定的路由表未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | 指定的NatGateway未处于稳态。 | 诊断 |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | IPv6公网带宽当前状态不支持创建IPv6仅出规则。 | 诊断 |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | 指定的EgressOnlyRlue当前状态不支持删除。 | 诊断 |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | 参数ZoneId非法。 | 诊断 |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | 参数VpcIPv6CidrBlock非法。 | 诊断 |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | 参数UserCidr非法。 | 诊断 |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | 参数Spec非法。 | 诊断 |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | 参数ServiceProvider非法。 | 诊断 |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | 参数SecondaryCidrBlock非法。 | 诊断 |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | 参数RouteEntryType非法。 | 诊断 |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | 参数NextTokenExpired非法。 | 诊断 |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | 参数Mode非法。 | 诊断 |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | 参数IpVersion非法。 | 诊断 |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | 参数IPv6CidrType非法。 | 诊断 |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | 参数Ipv6CidrBlock非法。 | 诊断 |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | 参数InstanceType非法。 | 诊断 |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | 参数EnableIpv6非法。 | 诊断 |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | 参数Description非法。 | 诊断 |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | 该VPC存在云服务资源，无法删除。 | 诊断 |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | 该VPC存在IPv6网关，无法删除。 | 诊断 |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | 指定的ClientToken存在重复。 | 诊断 |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | 指定的SecondaryCidrBlock存在重复。 | 诊断 |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | 参数ChargeType非法。 | 诊断 |
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | 关闭该路由表的路由传播不被允许。 | 诊断 |
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | 超过用户能创建的物理专线配额, 请联系管理员增加配额后重试. | 诊断 |
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | 超过单接入点可购买的物理专线配额, 请联系管理员增加配额. | 诊断 |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | 获取高速通道资源状态信息失败，请核对资源信息后再次查询。 | 诊断 |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | 参数 IpVersion 异常,请核对参数后重试. | 诊断 |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | 添加 BGPGroup 时对端自治系统编号不能与本端自治系统编号相同, 请核对参数后重试. | 诊断 |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | 操作被禁止，因为不允许发布自定义路由表中的路由条目。 | 诊断 |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | 路由条目的路由发布状态不正确。 | 诊断 |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | 该路由条目已经发布到其他组件，指定的下一跳类型不支持路由发布。 | 诊断 |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | 路由发布的目标实例没有和VPC关联。 | 诊断 |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | 操作被拒绝，因为路由发布目标的类型当前不支持。 | 诊断 |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | 指定的路由表状态不对 | 诊断 |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | 发布系统路由操作不支持。 | 诊断 |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | 路由条目的下一跳类型不支持发布。 | 诊断 |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | 发布路由前缀列表路由操作不支持。 | 诊断 |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | 为NAT网关实例创建SNAT规则时，不能同时传入SnatIp参数和NetworkInterfaceId参数。 | 诊断 |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | 为开启了私网链接服务的NAT创建Snat规则时需要指定NetworkInterfaceId参数。 | 诊断 |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | 为公网NAT或私网NAT创建Snat规则时需要指定SnatIp参数。 | 诊断 |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | 该地域不支持创建未绑定资源的IPv6地址实例。 | 诊断 |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | 该地域不支持创建未绑定资源的IPv6前缀网段。 | 诊断 |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | VPC存在IPv6路由,禁止关闭IPv6。 | 诊断 |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | 当前地域不支持分配游离态IPv6地址实例 | 诊断 |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | 由于IPv6前缀中存在IPv6已被使用，操作失败 | 诊断 |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | 指定的入参Ipv6Prefix非法 | 诊断 |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | 指定的入参AddressType非法 | 诊断 |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | 该路由器接口不支持ipv6 | 诊断 |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | 倒换组中 VBR 的 BGP 组 AS 号必须是相互一致的。 | 诊断 |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | 指定的资源不足 | 诊断 |
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | 指定绑定的网卡或VM不存在。 | 诊断 |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | 存在多个无效入参。 | 诊断 |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | 连续EIP库存不足。 | 诊断 |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId和BandwidthPackageId是互斥的。 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId和RouteTableIdOrDestCidrBlock是互斥的。 | 诊断 |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | 参数ProductType非法 | 诊断 |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | 资源不足：未找到匹配的CIDR块。 | 诊断 |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | 申请连续EIP失败，该服务已下线，请使用IP地址池服务。 | 诊断 |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | 缺少参数 VBR 倒换组实例 ID 或者 VBR 实例 ID。 | 诊断 |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | 入参Ipv6AddressId和Ipv6InternetBandwidthId不能同时为空 | 诊断 |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | 指定的资源不存在 | 诊断 |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | 当前的故障演练任务正在操作中，请稍后重试。 | 诊断 |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | 单vbr多pconn场景的vbr不支持故障演练。 | 诊断 |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId 和 VpnConnectionId 是互斥的。 | 诊断 |
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | 运维事件不存在。 | 诊断 |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | 指定的运维事件执行时间要在最迟执行时间之前。 | 诊断 |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | VPN网关IP不存在。 | 诊断 |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | 指定的PrivateIpAddress无效。请检查参数约束，并在修改后重试。 | 诊断 |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | VBR 实例未获得 VPC 实例授权 ，请授权后重试。 | 诊断 |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | vbr绑定了多个pconn | 诊断 |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | 物理专线不存在 | 诊断 |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | 虚拟边界路由器不存在 | 诊断 |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | 由于边界路由器正处于加载或者卸载专线网关过程中，当前操作无法执行，请您稍等后重试。 | 诊断 |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | 当前VBR已经创建的BGP邻居与ECR配置冲突，请删除BGP配置后重试。 | 诊断 |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | 网段不存在。 | 诊断 |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | 操作被其他请求加锁； | 诊断 |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | VBR路由表中不存在指定的下一跳 | 诊断 |
| 400 | Idempotence.Processing | Idempotence request is processing. | 被幂等请求处理中。 | 诊断 |
| 400 | InvokeError | instance quota rule invoke error. | 获取规则数据失败，请稍后再试 | 诊断 |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | 参数IPv6 网段不合法 | 诊断 |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | UserCidr 不合法 | 诊断 |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | 缺少 EnableIpv6 参数 | 诊断 |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | IPv6 网段不合法 | 诊断 |
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | 指定的VpcId实例不存在 | 诊断 |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | 缺少必须参数 | 诊断 |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | 指定路由名称不合法 | 诊断 |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | 指定路由条目不存在 | 诊断 |
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | 路由存在多个下一跳。 | 诊断 |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | 当前接入点信息不存在，请核对后重试。 | 诊断 |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | 当前资源无法执行此操作。请联系值班人员获取帮助。 | 诊断 |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | 当前资源未与专线网关关联，无法执行此操作，请核对后重试。 | 诊断 |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | 指定的 BondRI 实例不存在。 | 诊断 |
| 500 | InternalError | Internal system error. | 内部系统错误。 | 诊断 |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | 边界路由器已经绑定了专线网关, 先将边界路由器从专线网关中删除后重试。 | 诊断 |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | 弹性网卡所在的交换机不存在 | 诊断 |
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | 开通IP地址池服务失败，请到配额中心申请权限。 | 诊断 |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | 指定的入参Zone和IpAddress或InstanceId存在冲突 | 诊断 |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | 前端端口分配失败 | 诊断 |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | 规格实例NAT网关不支持打开会话日志。 | 诊断 |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | 当前业务状态不支持创建IP地址池实例。 | 诊断 |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | 您无权使用请求的IP地址池服务。 确保您已经订阅了您尝试使用的服务。 | 诊断 |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | 该地域不支持IPAM功能。 | 诊断 |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | 由于内部服务错误引起配置会话日志失败. | 诊断 |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | VPC还有静态路由指向ECR，不允许解除关联 ECR | 诊断 |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | 指定的实例ID不存在。 | 诊断 |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | 会话日志投递目标类型参数SessionLogDeliveryType输入不符合要求 | 诊断 |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | 操作失败因为您未授权NAT会话日志投递权限 | 诊断 |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | 会话日志投递目标参数(SessionLogDeliveryDestination)配置格式无效 | 诊断 |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | NAT会话日志投递规则配置失败. | 诊断 |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | 操作共享资源导致操作失败 | 诊断 |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | 启动双因子认证时请输入IDaaSRegionId参数。 | 诊断 |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | 操作被拒绝，原因是可用的CIDR资源不足。 | 诊断 |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | 操作被拒绝，原因是输入的CIDR在不合法的CIDR范围内。 | 诊断 |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | 依赖资源IPAM Pool不存在。 | 诊断 |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | 操作被拒绝，因为未在地址池所在地域调用请求。 | 诊断 |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | 操作被拒绝，因为无法从不具备地域属性的地址池中创建VPC或为VPC添加附加网段。 | 诊断 |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | 从IPAM地址池创建资源时，请输入Cidr或CidrMask。 | 诊断 |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | 接入点类型不支持创建高可靠物理专线。 | 诊断 |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | IPAM Pool不可以为空。 | 诊断 |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | 指定的Ipv4CidrMask不合法。 | 诊断 |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | SecondaryCidrMask参数需要输入。 | 诊断 |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | 指定的SecondaryCidrMask不合法。 | 诊断 |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | BGP组的阿里云侧 BGP AS 号必须与 ECR的 AS号一致。 | 诊断 |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | 路由接口不支持IPv6。 | 诊断 |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | VPC未处于稳态. | 诊断 |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | 指定的前缀网段必须位于交换机预留网段内 | 诊断 |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | 指定的IPv6前缀掩码超出配额。 | 诊断 |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | 操作失败，原因是资源正处于绑定状态。 | 诊断 |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | 当前VPN实例版本不支持使用IDaaS2.0。 | 诊断 |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | 指定的IDaaS应用实例ID不合法，应用实例需要基于专属SSL VPN的模板创建。 | 诊断 |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | 指定的IDaaS应用实例ID不存在。 | 诊断 |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | 启动双因子认证时请输入IDaaSApplicationId参数。 | 诊断 |
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | 已经开通出云流量服务，去控制台使用它。 | 诊断 |
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | 已经开通出云流量服务，去控制台使用它。 | 诊断 |
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | VBR与ECR存在绑定关系，请先解除绑定 | 诊断 |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface 不支持 IPv6。 | 诊断 |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | NextHopType 参数非法。 | 诊断 |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | 当前NAT网关不支持修改PrivateLinkMode。 | 诊断 |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | 当前不支持创建Geneve模式的NAT网关。 | 诊断 |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | 客户您好，阿里云计划对当前地域进行优化调整，该区域云服务将停止运营，为确保您的业务连续性及数据迁移工作的平稳过渡，您目前无法操作新购等类型的订单，感谢理解与支持。 | 诊断 |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | 预付费实例不再支持购买。 | 诊断 |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | 非法参数：目的CIDR。 | 诊断 |
| 400 | IllegalParam.Policy | Param Policy illegal. | 非法参数：Policy | 诊断 |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | 非法参数：Protocol。 | 诊断 |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | 非法参数：IpVersion。 | 诊断 |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | 非法参数：源CIDR | 诊断 |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | VBR 倒换组实例参数是非法的。 | 诊断 |
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | 路由器接口被路由条目引用。 | 诊断 |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | 不支持在未绑定资源的IPv6实例上创建仅主动出规则 | 诊断 |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | 依赖资源vSwitchCidrReservation不存在 | 诊断 |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | Ipv6Prefix特性在该地域不支持 | 诊断 |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | 路由器接口状态异常。 | 诊断 |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | 作为路由下一跳的网卡业务类型非法。 | 诊断 |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | 指定的实例在当前地域不存在 | 诊断 |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | 指定的入参Day不合法 | 诊断 |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | 由于资源uid不存在，操作失败。 | 诊断 |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | 共享带宽包资源不足。 | 诊断 |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | 操作被拒绝，原因是存在路由表1.0。 | 诊断 |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | ServiceLocation参数非法。 | 诊断 |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | 参数EnableIpv6和CidrBlock互斥。 | 诊断 |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | 绑定了Qos策略的独享物理专线不允许创建共享物理专线，请联系商务经理。 | 诊断 |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | 绑定了Qos策略的共享物理专线不允许创建跨账号虚拟边界路由器，请联系商务经理。 | 诊断 |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | 不允许一条QoS规则内同时存在IPv4地址配置和IPv6地址配置 ，与此同时若原有的配置网络类型为IPv4不允许修改为IPv6（反之亦然），请您检查后修改。 | 诊断 |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | QoS队列中QoS规则数量超过上限，如果想要提升配额，请联系商务经理。 | 诊断 |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | QoS策略中普通优先级队列的带宽百分比之和超过规格。 | 诊断 |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | QoS策略中高优先级队列个数超过规格，如果需要提升配额，请联系商务经理。 | 诊断 |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | QoS策略中普通优先级队列个数超过规格，如果需要提升配额，请联系商务经理。 | 诊断 |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | 您当前的Qos策略已关联了物理专线，无法直接删除，请先解除关联后再次重试。 | 诊断 |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | 物理专线所在的设备不支持Qos特性。 | 诊断 |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | 单VBR多Pconn场景，必须将所有的Pconn都绑定QoS策略。 | 诊断 |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | 包含跨账号虚拟边界路由器的独享物理专线不允许绑定Qos策略。 | 诊断 |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | 包含共享物理专线的独享物理专线不允许绑定Qos策略。 | 诊断 |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | 当前物理专线处于欠费状态，不能进行此操作。 | 诊断 |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | 当前Qos配置与其他配置冲突，请稍后再试。 | 诊断 |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | 物理专线已经绑定到了其他的QoS策略上。 | 诊断 |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | 当前物理专线的状态不正常，不能进行此操作。 | 诊断 |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | 当前QoS策略状态异常，无法进行操作，请稍等后尝试。 | 诊断 |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | 当前用户不支持创建QoS，请联系商务经理 | 诊断 |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | 当前用户的QoS策略数量超过限制，请联系商务经理解决。 | 诊断 |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | 创建双隧道VPN时指定的两个虚拟交换机必须要属于不同可用区 | 诊断 |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | 虚拟交换机所在可用区不支持创建双隧道VPN，请更换虚拟交换机。 | 诊断 |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | 不允许删除VPC，因为TR连接仍存在。 | 诊断 |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | 当前预留网段状态不支持该操作，请稍后重试 | 诊断 |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | 由于您的账户存在未生效的变配订单，当前操作不被允许 | 诊断 |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | 您指定的资源被其他的资源依赖，不允许进行当前操作。 | 诊断 |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | 共享带宽包中已有此弹性公网IP实例。 | 诊断 |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | 虚拟交换机状态异常。 | 诊断 |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | RouterEntry当前状态不正确。 | 诊断 |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | 您指定的AvailableZoneId没有获取到对应的集群IP地址。 | 诊断 |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | 流量镜像源中存在NAT网关网卡时，流量镜像目的必须为SLB类型 | 诊断 |
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | 边界路由器已经绑定了专线网关，不允许修改本端AS，要修改请先解绑专线网关 | 诊断 |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | 边界路由器的LocalAsn必须与ECR的asn相同 | 诊断 |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | 由于存在绑定操作失败，操作失败。 | 诊断 |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | EIP安全防护类型与地址池安全防护类型不匹配。 | 诊断 |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | 传入的SecurityProtectionTypes参数非法 | 诊断 |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | 当前ISP不支持创建增强型安全防护地址池。 | 诊断 |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | 指定的IPv6地址已被分配 | 诊断 |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | DetectMultiplier参数不在适当范围内。 | 诊断 |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | 指定的地址已被分配 | 诊断 |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | 指定的AssociatedPhysicalConnections不合法。 | 诊断 |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | 指定的IpAddress不合法 | 诊断 |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | 指定的 MinTxInterval 不在适当的范围内。 | 诊断 |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | 指定的 MinRxInterval 不在适当的范围内。 | 诊断 |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | 指定的 NAT 网关不存在。 | 诊断 |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | uid、bid、regionNo、remoteRegionNo和routerId等参数不能为空 | 诊断 |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | 当路由接口欠费时，无法进行此操作。 | 诊断 |
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | 存在指向路由器接口的路由导致无法删除 | 诊断 |
| 400 | AvailableZoneNotExist | Available zone not exist. | 可用区不存在。 | 诊断 |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | 参数值存在重复 | 诊断 |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | 描述的长度可以是2到256个字符，不能以http://和https://开头。 | 诊断 |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | 指定的绑定实例已经具有带宽。 | 诊断 |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | 参数重复。 | 诊断 |
| 400 | ForbiddenAction | The user does not support this action. | 您没有所需的权限。 | 诊断 |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | 带宽计划的带宽不足。 | 诊断 |
| 400 | RouteConflict | Route conflict exists in routing table. | 路由表中存在路由冲突。 | 诊断 |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | VirtualPhysicalConnection没有权限或处于欠费状态，该操作不被允许 | 诊断 |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | 路由表中存在路由冲突 | 诊断 |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | 流量镜像目的不支持该流量镜像源的类型 | 诊断 |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | 参数Description值不合法 | 诊断 |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | 无权限创建共享专线，请联系商务经理。 | 诊断 |
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | 只有当路由器接口的状态为Active,Idle或Inactive时该操作才被允许 | 诊断 |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | 指定的带宽包不存在。 | 诊断 |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | 您指定的路由表类型不支持。 | 诊断 |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | 您指定的路由表类型不支持。 | 诊断 |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | 创建目的路由数量超过配额限制。 | 诊断 |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | 修改VPN连接参数失败，在使用IkeV1协议的同时配置了多网端。 | 诊断 |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | 该VPN处于正在配置状态，请稍等一会再进行操作。 | 诊断 |
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | 您现在所操作的资源目前已经达到了配额的上限，请参考VPN操作文档，进行配额提升或者使用其他方案进行规避。 | 诊断 |
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | 未查询到该vpn 连接下的连接日志 | 诊断 |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | 创建VPN用户网关数量超出配额。 | 诊断 |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | 创建超过配额限制的SSL证书数量。 | 诊断 |
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | 策略路由数量超过配额限制。 | 诊断 |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | 当前该VCO 状态不支持进行修改，删除等操作。 | 诊断 |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | 不支持同一个VPN下，不同的VPN连接在使用相同的用户网关场景下，配置了不同的Ike配置。 | 诊断 |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | 路由指向的下一跳不合法 | 诊断 |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | 参数不正确，未找到相应的SSL VPN 服务端的证书。 | 诊断 |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | 该地域创建VPN网关时，不允许传入第二个vswitch id。 | 诊断 |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | 双隧道VPN在创建隧道时，必填参数缺失。 | 诊断 |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | VPN连接数量超过配额限制。 | 诊断 |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | 用户购买VPN的账户余额不足。 | 诊断 |
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | 该资源无法被删除，因为该资源下有ipsec 服务端依赖。 | 诊断 |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | 没有权限绑定多直通eip。 | 诊断 |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | 不能修改边界路由器的跨地域连接，请申请权限 | 诊断 |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | 不支持创建Nat带宽包。 | 诊断 |
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | 只有处于已取消、已拒绝、已终止、已分配、分配失败状态的物理专线才可以被删除。 | 诊断 |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | 您指定的Isp暂未支持 | 诊断 |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | 该eip实例已经不在带宽包内。 | 诊断 |
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | 指定的NAT网关已绑定了弹性公网IP，请先将其从NAT网关解绑。 | 诊断 |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | NatIpPort参数不合法。 | 诊断 |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | OutIp参数格式不合法。 | 诊断 |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | NetworkInterfaceId参数不合法。 | 诊断 |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | 正在处理上一条令牌请求，请您稍后再试。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | 指定的 VSwitchCidrReservationMask 至少比 VSwitch 的掩码大 2。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | 指定的 VSwitchCidrReservationMask 必须大于 VSwitch 的掩码 + 1。 | 诊断 |
| 400 | InnerError | Internal system error. | 内部系统错误 | 诊断 |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | 存在禁止下单的标签，请联系您的分销商处理。 | 诊断 |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | 查询订单失败，调用trade应用出错。 | 诊断 |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | Ip和带宽包不匹配，不在指定带宽包中。 | 诊断 |
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | 策略路由配额超限 | 诊断 |
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | 凌霄查询当前用户托管关系失败。 | 诊断 |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | EIP的状态不正确。 | 诊断 |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | 运营商线路运维联系方式不合法 | 诊断 |
| 400 | InvalidParam | The routerEntry input param is illegal. | 修改路由的入参不合法。 | 诊断 |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | 指定Ipv6CidrBlock时EnableIpv6不能是False | 诊断 |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | 该地域不支持云盒公网。 | 诊断 |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | nat网关状态不正确。 | 诊断 |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | 资源所在地域和调用服务的地域不一致。 | 诊断 |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | 下一跳只支持绑定普通弹性网卡 | 诊断 |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | 过滤参数Key不合法。 | 诊断 |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | 过滤参数不支持只输入ResourceId或者ResourceName而不输入ResourceType。 | 诊断 |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | 过滤参数中一个Key里面的Value个数不能超过5个。 | 诊断 |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | 过滤参数中Key的个数不允许超过5个。 | 诊断 |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | 过滤参数Value不合法。 | 诊断 |
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | 指定的RouterInterface实例不存在 | 诊断 |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | 只有演练中状态的故障演练任务才可以被结束。 | 诊断 |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | 只有待演练或者已完成状态的故障演练任务才能被删除。 | 诊断 |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | 输入的故障演练任务ID不合法。 | 诊断 |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | 只有待演练的故障演练任务才可以修改或执行开始。 | 诊断 |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | 输入的共享物理专线没有关联虚拟边界路由器 | 诊断 |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | VLAN 0的共享物理专线不支持进行故障演练。 | 诊断 |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | 包含了超过1个共享物理专线的物理专线不支持故障演练。 | 诊断 |
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | 包含了超过1个跨账号VBR的物理专线不支持故障演练。 | 诊断 |
| 400 | AnotherJobTesting | There is another job which is testing. | 同一个用户在同一个地域只能同时进行一个故障演练任务。 | 诊断 |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | 输入的任务类型不合法。 | 诊断 |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | 输入的任务时长不合法。 | 诊断 |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | 输入的资源处于欠费状态。 | 诊断 |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | 输入的参数资源ID不合法 | 诊断 |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | 输入的资源ID对应的资源状态不合法。 | 诊断 |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | 当前用户已经存在一个正在进行的故障演练任务，请完成后再重试。 | 诊断 |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | 故障演练任务最多可以添加16个资源。 | 诊断 |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | 指定的地址已被分配 | 诊断 |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | 单VPC创建网关路由表Quota已达上限。 | 诊断 |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | 您申请的资源不足，如仍需申请，请提工单处理 | 诊断 |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | 指定的IPv6仅主动出规则实例不存在。 | 诊断 |
| 400 | EcFailToGetAp | Fail to get access point details. | 无法查询到对应接入点信息 | 诊断 |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | 高可靠物理专线在本地域暂时不支持售卖 | 诊断 |
| 400 | EcNotEnoughResource | Insufficient access point resources. | 接入点资源不足 | 诊断 |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | 指定的Ipv6Address和Ipv6Gateway不在同一VPC内 | 诊断 |
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | 指定传入的用户网段参数数量达到配额限制。 | 诊断 |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | 对端的路由器接口已被删除 | 诊断 |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | NAT网关实例正在被删除，无法重复删除，需要等待删除过程完成。 | 诊断 |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | 由于实例关联的路由条目处于非稳态，请稍后重试 | 诊断 |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | 传入的IPv6网关实例不存在。 | 诊断 |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的资源被其他的资源依赖，不允许进行当前操作 | 诊断 |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | PrefixList关联关系不存在。 | 诊断 |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | 不支持指定该资源类型为下一跳 | 诊断 |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | 指定的vSwitch处于非稳态。 | 诊断 |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | 指定的下一跳资源处于非稳态 | 诊断 |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | 用户没有权限操作指定的资源。 | 诊断 |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | 存在相同前缀的路由，前缀为%s。 | 诊断 |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | 路由条目处于非稳态 | 诊断 |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | 指定的路由条目不存在 | 诊断 |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | 指定的LeaseTime参数不合法 | 诊断 |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | 指定的Priority不合法或与其他的镜像会话相同 | 诊断 |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | 输入的GatewayType非法 | 诊断 |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | 指定的vSwitch不存在，请检查您的输入是否正确 | 诊断 |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | 指定的VSwitch未开通Ipv6，请开通Ipv6后再进行该操作 | 诊断 |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | 指定的IP地址不在vSwitch的网段内，请按API文档参数说明修改后重试。 | 诊断 |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | 指定分配的Ip地址数量大于上限，请按API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | 指定的IP地址格式非法，请按API文档参数说明修改后再重试 | 诊断 |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | 指定的Ip地址存在重复Ip，请按API文档参数说明修改后再重试 | 诊断 |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | 指定的IPv6实例ID不存在，请检查您的输入是否正确 | 诊断 |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | 指定的Ipv4Gateway处于非稳态，请稍后重试 | 诊断 |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | 指定的网关路由表实例处于非稳态，请稍后重试 | 诊断 |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | 指定的网关路由表已绑定同类型网关实例 | 诊断 |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | 您指定的网关路由表和网关实例不属于同一个VPC，请检查您的输入是否正确 | 诊断 |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | 您指定的网关路由表暂不支持绑定该网关实例 | 诊断 |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | 您指定的网关路由表实例不是边界网关路由表，请检查您的输入是否正确 | 诊断 |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | 您指定的Ipv6Gateway处于非稳态，请稍后重试 | 诊断 |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | 您指定的ipv6地址非法，请检查您的输入是否正确 | 诊断 |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | 您输入的NetworkType非法，请检查您的输入是否正确 | 诊断 |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | 您指定的Ipv6Address不存在，请检查您的输入是否正确 | 诊断 |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | 您指定的Ipv6Instance实例处于非稳态，请稍后重试 | 诊断 |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | 当前Ipv6实例为游离态，不支持所指定的付费类型，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | 当前指定Ipv6实例为单线ISP实例，不支持所指定的付费类型，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | 当前指定的Bandwidth非法，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | OperationUnsupported.ULA | %s is unsupported. | 当前操作不支持ULA地址 | 诊断 |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | 您所指定的Ipv6Address和Ipv6Gateway不在同一VPC内，请确认您的输入是否正确 | 诊断 |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | 您当前操作的Ipv6地址所在的VPC不存在Ipv6Gateway实例，请创建Ipv6Gateway再进行该操作 | 诊断 |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | 您当前操作的Ipv6实例已开通公网带宽，请勿重复开通 | 诊断 |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | 您当前指定的计费类型需开通CDT计费，请开通CDT后重试 | 诊断 |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | Ipv6公网带宽不支持预付费，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | 您指定的InternetChargeType非法，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | 您输入的ChargeType非法，请参考API文档参数说明修改后重试 | 诊断 |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | Ipv6InstanceId和Ipv6InternetBandwidthId不能同时为空 | 诊断 |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | 托管实例不允许进行该操作 | 诊断 |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | 指定的Ipv6InstanceId不存在，请确认您的输入是否正确 | 诊断 |
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | SNAT条目数量已达到配额。 | 诊断 |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | 当前地域不支持修改路由下一跳功能。 | 诊断 |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | 查询cen路由异常。 | 诊断 |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | 目标CIDR参数格式不合法。 | 诊断 |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | 当前网卡状态不支持该操作，请稍后重试 | 诊断 |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | 端口的LOA状态不允许完工报竣或者线路运维 | 诊断 |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | 修改路由条目下一跳缺失待修改路由条目下一跳实例类型信息。 | 诊断 |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | 修改路由条目下一跳缺失待修改路由条目下一跳实例ID信息。 | 诊断 |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | 路由条目下一跳类型非法。 | 诊断 |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | 指向普通类型NAT网关的路由条目不支持修改下一跳。 | 诊断 |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | 当前路由条目不支持修改下一跳信息。 | 诊断 |
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | 路由表实例不存在。 | 诊断 |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | 指定的网卡类型下一跳实例ID不存在。 | 诊断 |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | 需要修改的目标路由条目下一跳已存在。 | 诊断 |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | 您的账户可用额度小于0，请先充值后再尝试购买。 | 诊断 |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | 两个路由器之间已经创建了连接 | 诊断 |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | 操作与已存在的路由冲突，操作失败。 | 诊断 |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | 无法手动删除指向GatewayEndpoint的路由。 | 诊断 |
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | 一个VPN网关不支持同时配置IPSec服务端与IPSec连接。 | 诊断 |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | TunnelId参数非法。 | 诊断 |
| 400 | IllegalParam.Role | The specified Role is invalid. | Role参数不合法。 | 诊断 |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | 您的账户可用额度小于0，请先充值后再尝试购买。 | 诊断 |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | 资源的交易信息同步失败。 | 诊断 |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | 查询实例订购信息失败 | 诊断 |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | 操作失败，本VPC未关联到此CEN中。 | 诊断 |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | 操作失败，VPC在CEN中状态未达稳态。 | 诊断 |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | 不支持在路由表中创建路由指向此类型的Cen。 | 诊断 |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | 操作失败，传入Cen资源不存在。 | 诊断 |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | 当前操作不支持无slave的bonding网卡。 | 诊断 |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | Havip实例为Available或InUse才允许操作 | 诊断 |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | IPSec连接关联的用户网关与VPN网关不应该有相同的网关IP地址。 | 诊断 |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | 由于存在Eip绑定在实例上，删除实例失败。 | 诊断 |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | 申请失败，该IP归属其他用户 | 诊断 |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | 申请失败，IP已经被锁定 | 诊断 |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | 检测到多个IPsec连接关联了相同的VPN网关和用户网关，多个IPsec连接的感兴趣流网段不能重叠。 | 诊断 |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | 检测到多个IPsec连接关联了相同的VPN网关和用户网关，多个IPsec连接的预共享密钥和IKE阶段的配置参数需保持相同。 | 诊断 |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | VPN网关不支持配置源网段、目标网段与权重同时相同的策略路由。 | 诊断 |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | VPN网关不支持相同优先级下的多个策略路由源和目标网段同时重合。 | 诊断 |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | 双隧道类型的VPN网关不支持配置源网段与目标网段同时相同的策略路由。 | 诊断 |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | vpc路由表中存在路由的前缀%s被包含在ipsec server 客户端 cidr 中。 | 诊断 |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | 当前vpn网关类型不支持开启高可用。 | 诊断 |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | 开启高可用，只支持Ipsec Vpn 或者 Ssl Vpn。 | 诊断 |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | 当前region不支持开启高可用。 | 诊断 |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | 主vSwitch所在可用区不支持。 | 诊断 |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | 备vSwitch所在可用区不支持。 | 诊断 |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | 主备可用区不能相同。 | 诊断 |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | 主vSwitch中可用IP数量不足。 | 诊断 |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | 存在相同前缀的策略路由，前缀为%s。 | 诊断 |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | 不同ipsec隧道BGP中存在相同的隧道cidr. 隧道cidr是%s. | 诊断 |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | vpc路由表中存在路由的前缀%s被包含在ssl vpn 客户端 cidr 中。 | 诊断 |
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | 备vSwitch中的可用IP不足。 | 诊断 |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | 同路由表中指向HaVip的路由数超过限制。 | 诊断 |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | 物理专线带宽值不合法。 | 诊断 |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | 公司本地化名称不合法。 | 诊断 |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | 公司名称不合法。 | 诊断 |
| 400 | IllegalParam.LineType | Invalid LineType. | 物理专线类型不合法。 | 诊断 |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | 物理专线的地理位置不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | 施工工程师证件类型不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | 施工工程师证件号码不合法。 | 诊断 |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | 施工工程师联系方式不合法。 | 诊断 |
| 400 | IllegalParam.PmGender | Invalid PmGender. | 施工工程师性别不合法。 | 诊断 |
| 400 | IllegalParam.PmName | Invalid PmName. | 施工工程师姓名不合法。 | 诊断 |
| 400 | IllegalParam.Si | Invalid Si. | 物理专线施工单位不合法。 | 诊断 |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | 物理专线实例ID不存在。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | 物理专线状态不正常。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | 物理专线施工状态不正常。 | 诊断 |
| 400 | ResourceType.Unknown | Unknown ResourceType. | 资源类型不存在 | 诊断 |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | 存在相同前缀的路由，前缀为%s。 | 诊断 |
| 400 | IllegalParam.Bandwidth | [%s] | 物理专线带宽值 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | 公司本地化名称 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.CompanyName | [%s] | 公司名称 [%s] 不合法 | 诊断 |
| 400 | IllegalParam.LineType | [%s] | 物理专线类型 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PeerLocation | [%s] | 物理专线的地理位置 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateType | [%s] | 施工工程师证件类型 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmCertificateNo | [%s] | 施工工程师证件号码 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmContactInfo | [%s] | 施工工程师联系方式 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmGender | [%s] | 施工工程师性别 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.PmName | [%s] | 施工工程师姓名 [%s] 不合法。 | 诊断 |
| 400 | IllegalParam.Si | [%s] | 物理专线施工单位 [%s] 不合法。 | 诊断 |
| 400 | InvalidInstanceId.NotFound | [%s] | 物理专线实例 [%s] 不存在。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | 物理专线 [%] 状态不正常。 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | 物理专线施工状态 [%s] 不正常。 | 诊断 |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | 共享物理专线不允许施工。 | 诊断 |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | 共享物理专线 [%s] 状态不正确。 | 诊断 |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | 资源拥有者阿里用户ID不合法。 | 诊断 |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | 虚拟边界路由器带宽超过物理专线阈值。 | 诊断 |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | 操作失败因为实例已经被运维锁定。 | 诊断 |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | 物理专线实例ID必须填写。 | 诊断 |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | 计划施工时间必须填写。 | 诊断 |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | 施工工程师信息必须填写。 | 诊断 |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | 该路由器接口不是用于连接的虚拟网络接口。 | 诊断 |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | 由于未清账单，此路由器接口已被锁定。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | 参数OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId必须全部设置。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId指定的对端路由器接口信息错误。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId指定的对端路由器接口信息错误。 | 诊断 |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | 路由器所有者信息错误 | 诊断 |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | VPC未处于稳态 | 诊断 |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | 云盒共享带宽和EIP的可用区不匹配 | 诊断 |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | 下一跳类型和下一跳实例不匹配。 | 诊断 |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | 指定的Ipv6网段不可用。 | 诊断 |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | 不允许新建IPv4网关，因为VPC已经存在VPN网关 | 诊断 |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | 操作不允许，获取nfv服务列表失败 | 诊断 |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | 当前实例状态非稳态 | 诊断 |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | AliUid不允许直接使能物理端口 | 诊断 |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | 接入设备不允许直接使能物理端口 | 诊断 |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | 当前地域不支持指定Zone创建实例 | 诊断 |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | 存在EIP正在加入共享带宽，不允许删除 | 诊断 |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | 无效的云服务类型 | 诊断 |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | 下单时查询账号信息失败 | 诊断 |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | 当前指定的私网IP和交换机不匹配。 | 诊断 |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | 参数LocalGatewayIpAndMask无效。 | 诊断 |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | 您当前quota配额不足，请您可以联系渠道伙伴为您增加额度。 | 诊断 |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | 已达到流日志的最大实例数。 | 诊断 |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | 只有当状态为“活动”、“空闲”或“非活动”时，才能通过此操作操作RouterInterface。 | 诊断 |
| 400 | ResourceQueryError | The specified resource is queried error. | 查询指定的资源时出错。 | 诊断 |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | Network Acl具有绑定。 | 诊断 |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | 操作失败，因为无法删除默认NatIPCidr。 | 诊断 |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s和%s不匹配。 | 诊断 |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | 找不到指定的%s资源。 | 诊断 |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | 无效的BgpPeer状态无法运行。 | 诊断 |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | 操作失败，因为无法删除默认的NatIP。 | 诊断 |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | 指定的SNAT条目不存在。 | 诊断 |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | InternalPort参数重复或已被占用 | 诊断 |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | 无法解除系统路由表的关联。 | 诊断 |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | 当存在网络acl时，无法删除VSwitch。 | 诊断 |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | 当前vpc中不存在指定的实例。 | 诊断 |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | 操作失败，因为EIP实例状态无效。 | 诊断 |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | 特殊网络Acl正在修改中。 | 诊断 |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | 下一个重复的路由条目。 | 诊断 |
| 400 | IpConflict | Client IP pool conflict with local IP range. | 客户端IP池与本地IP范围冲突。 | 诊断 |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | 客户端IP池与同一VPC中的其他SSL VPN服务器冲突。 | 诊断 |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | 指定VPN网关的SSL VPN服务器已存在。 | 诊断 |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | 只有当路由表的类型为自定义时，才能通过此操作删除路由表。 | 诊断 |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | 当natgw存在时，无法删除VSwitch。 | 诊断 |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | 绑定实例处于中间状态。 | 诊断 |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | IP的状态不正确。 | 诊断 |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | 当snat使用时，无法删除vswitch。 | 诊断 |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | 找不到指定的%s资源。 | 诊断 |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | %s[%s]的状态不正确。 | 诊断 |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | 找不到指定的IP。 | 诊断 |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | 区域没有可用资源。 | 诊断 |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | 指定的对象具有从属资源网络acl。 | 诊断 |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | 超过VPC RouteTable配额。 | 诊断 |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | 创建订单时查询价格失败。 | 诊断 |
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | Vbr和物理连接不在同一访问设备上。 | 诊断 |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | DNAT公网端口%s已被重复占用。 | 诊断 |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | NatIpCidr地址段不在用户定义地址段区间内 | 诊断 |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | 使用子项目验证销售条件失败。 | 诊断 |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | 操作失败. 与其他条目有冲突, 存在任何端口或任何协议类型. | 诊断 |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | 调用内部服务失败，请稍后重试。 | 诊断 |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | 参数中的ip版本非法。 | 诊断 |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | 缺少参数对端ip地址 | 诊断 |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | 对端Ip地址非法。 | 诊断 |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | 参数ResourceType缺失 | 诊断 |
| 400 | Ip.Allocated | The reserve ip has been allocated. | 已分配保留ip。 | 诊断 |
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | 操作冲突，不允许同时修改Ipv6Cidr和DisableIpv6功能。 | 诊断 |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | 当前EIP不属于NAT带宽包。 | 诊断 |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | 操作失败，未预留该IPv6地址段。 | 诊断 |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | 无法将绑定路由表直接切换为系统路由表。 | 诊断 |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | 操作失败，传入的IPv4网关和路由表不属于同一VPC。 | 诊断 |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | 操作失败，CIDR地址段正在被使用。 | 诊断 |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | 诊断 |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | 该地域的DhcpOptionsSet未支持自定义LeaseTime | 诊断 |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | 该镜像目标关联的镜像源数量超过限额。 | 诊断 |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | 输入的资源不在输入的资源组内 | 诊断 |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | 路由器接口由于欠费被锁定，无法操作。 | 诊断 |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | 路由器接口为用户侧接口，不可激活。 | 诊断 |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | 该ipv6实例已存在仅主动出规则。 | 诊断 |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | 只有当状态为“非活动”时，才能通过此操作操作RouterInterface。 | 诊断 |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | 只有路由器接口处于“闲置”状态时，才可以使用此操作。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 必须全部设置。 | 诊断 |
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId指定的对端路由器接口信息错误。可能是RouterInterface 或Router不存在，或者参数不匹配，或者RouterInterface不是连接接收方。 | 诊断 |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | 仅当路由器接口处于“Active”状态时，才可以使用该操作。 | 诊断 |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | 该路由器不属于您的账号。 | 诊断 |
| 400 | MissingParam.Zones | The Zones parameter is required. | 参数Zones必填 | 诊断 |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | 参数Zones非法 | 诊断 |
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | 连续EIP组中的EIP加入共享带宽，不允许删除连续EIP组。 | 诊断 |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | Zones数组大小非法 | 诊断 |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | 不允许同时传入参数Zone和PublicIpAddressPoolId | 诊断 |
| 400 | IllegalParam.Zone | The specified zone is invalid. | 参数Zone非法 | 诊断 |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | 云盒共享带宽和EIP的可用区不匹配 | 诊断 |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | 流日志投递地址无效，无法启动该流日志。 | 诊断 |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | 路由下一跳实例处于运维锁定状态，无法操作。 | 诊断 |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | 该VPC存在对端RouterInterface未删除，删除VPC失败。 | 诊断 |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | 端口段数量超限。 | 诊断 |
| 400 | InvalidAccount.NotFound | The account is invalid. | 操作失败，使用了无效的调用账号。 | 诊断 |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | NatIpCidr地址段与VPC地址段有重叠，操作失败。 | 诊断 |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | 您传入的私网IP地址不存在。 | 诊断 |
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | 查询辅助弹性网卡信息失败。 | 诊断 |
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | 绑定实例不属于您的账号。 | 诊断 |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | 使用IPAM创建VPC特性不支持 | 诊断 |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | 当前资源的状态不支持该操作 | 诊断 |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | 指定的设备不存在 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | 实例状态不正确 | 诊断 |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | 传入的高可用虚拟IP与路由表不属于同一个VPC。 | 诊断 |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | 指定的流量镜像目标实例不存在。 | 诊断 |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | 当前地域不支持Ipv6特性。 | 诊断 |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | 指定的Ipv6Isp特性不支持。 | 诊断 |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | 指定的地址池类型无效。 | 诊断 |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | 指定的Ipv6CidrBlock非法。 | 诊断 |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | 指定的IPv6网段资源不足。 | 诊断 |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | 交换机不允许绑定网关路由表。 | 诊断 |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | 诊断 |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | 传入的IPv4网关实例不存在。 | 诊断 |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | 路由Cidr与已存在的前缀列表路由冲突。 | 诊断 |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | 操作失败，此前缀列表路由存在。 | 诊断 |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | SSL VPN 服务端端口号需要在[1-65535]之间。 | 诊断 |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | 指定的VSwitchCidrReservationCidr不能包含系统预留IP地址 | 诊断 |
| 400 | IllegalParam.ResourceType | Invalid %s value. | 传入的参数ResourceType不合法 | 诊断 |
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | 输入非法的路由器描述信息。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | 指定的 VSwitchCidrReservationMask 必须大于VSwitch的掩码 + 2。 | 诊断 |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | 指定的预留网段不能包含已被使用的IP地址。 | 诊断 |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | Local路由只能修改下一跳属性。 | 诊断 |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | 输入策略信息格式错误。 | 诊断 |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | 不允许创建下一跳为此类型的路由。 | 诊断 |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | 您申请的资源不足，如仍需申请，请提工单处理 | 诊断 |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | 存在Eip绑定私网IP出公网的场景，此功能的实现依赖IPv4网关的存在，故无法删除IPv4网关。 | 诊断 |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | 参数Description 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | 指定的服务欠费锁定。 | 诊断 |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | 您暂时无法创建 PublicIpAddressPool，请检查账号是否已授权该操作 | 诊断 |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | 您的PublicIpAddressPool数量已达配额，请提升配额后操作 | 诊断 |
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | 指定的路由条目不存在。 | 诊断 |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | 指定的路由条目正在配置中。 | 诊断 |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | 用户无权限操作此资源。 | 诊断 |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | 不支持修改在共享端口上创建的虚拟路由器的带宽规格 | 诊断 |
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | 当前业务状态不支持创建流日志实例 | 诊断 |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | 您无权使用请求的 flowLog 服务。 确保您已经订阅了您尝试使用的服务。 | 诊断 |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | 您指定的 ReservedCidrMask不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | 您创建的CidrReservation已超限 | 诊断 |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | 您指定的 VSwitchCidrReservation 不存在，请确认 VSwitchCidrReservation的状态是否可用。 | 诊断 |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | Eip绑定IpAddress特性不支持。 | 诊断 |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | 当前交换机正被云服务使用无法删除，请确认云服务使用场景。 | 诊断 |
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | 费用非法 | 诊断 |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | 当前VPN连接没有关联任何证书。 | 诊断 |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | 当前地域不支持开启BGP。 | 诊断 |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | 参数 Isp 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | 参数 Name 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | 该实例已欠费锁定，无法操作 | 诊断 |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | EIP实例被锁定 | 诊断 |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | 您指定的 VSwitch 不存在，请确认 VSwitch 的状态是否可用。 | 诊断 |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | 您指定的VSwtich未开启Ipv6 | 诊断 |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | 您指定预留的Cidr不满足预留条件 | 诊断 |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | ReservedCidr或ReservedCidrMask必须指定其中一个 | 诊断 |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | 参数 ReservedCidrMask 不合法，请根据请求参数规定重新输入。 | 诊断 |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | 您指定的ReservedType未支持，请根据请求参数规定重新输入 | 诊断 |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | 你指定的VSwitch所在的VPC未支持高级特性，请更换其他VSwitch重试 | 诊断 |
| 400 | UnsupportedRegion | UnsupportedRegion | 当前Region未支持该特性 | 诊断 |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | 网卡实例不存在 | 诊断 |
| 400 | InvalidInstanceId | VPC does not exists. | VPC实例不存在 | 诊断 |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | SLS源项目或日志库不存在。 | 诊断 |
| 400 | OperationUnsupported.action | This action is not support. | 此操作不支持。 | 诊断 |
| 400 | InvalidInstanceId | Instance does not exist. | 实例不存在。 | 诊断 |
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | 指定的项目或logstore不存在。 | 诊断 |
| 400 | ParameterInvalid | Invalid parameter. | 入参非法 | 诊断 |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | 入参Description无效 | 诊断 |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | Ipv6地址不合法 | 诊断 |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | Ipv6实例Id不合法 | 诊断 |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | NetworkType 不合法 | 诊断 |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | 指定的DomainName不合法 | 诊断 |
| 400 | MissingParam | MissingParameter %s | 参数缺失 | 诊断 |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | 该请求不允许操作此 tagkey | 诊断 |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | 系统tag无效 | 诊断 |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | 系统繁忙，请稍后重试 | 诊断 |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | 当前Region不支持 | 诊断 |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | 指定的共享带宽包不存在 | 诊断 |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | 不支持查询已接入云数据传输的共享带宽实例 | 诊断 |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | 无效的商品代号，请修改后重试。 | 诊断 |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | 实例未加载到CEN，该操作禁止。 | 诊断 |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | 未开启出云流量费，该操作禁止。 | 诊断 |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | 前缀数超过配额。 | 诊断 |
| 400 | ResourceInConfiguring | The resource is being configured. | 资源正在变配中。 | 诊断 |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | 指定的VSwitchCidrReservation实例不存在。 | 诊断 |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | 互联IP重复，请更换后重试。 | 诊断 |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | 指定的NetworkInterface %s 不存在 | 诊断 |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | 当前操作不支持传统型负载均衡实例 | 诊断 |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | VPN网关没有绑定任何证书。 | 诊断 |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | 当创建国密VPN连接时，对端ID是必填参数。 | 诊断 |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | 指定的用户网关上有 vpn 连接未删除。 | 诊断 |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | 指定的 vpn 网关上有 SSL VPN 服务端未删除。 | 诊断 |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | 指定的 vpn 网关上有 Gre 隧道未删除。 | 诊断 |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | 指定的路由条目不存在。 | 诊断 |
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | 该资源已分配IpPrefix，请删除IpPrefix后重试 | 诊断 |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | 对端IP地址重复。 | 诊断 |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | 本端Ip重复。 | 诊断 |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | 本端ip地址重复。 | 诊断 |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | 互联ip地址重复，请更换后重试。 | 诊断 |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | 对端ip地址重复。 | 诊断 |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | 目前不支持使用前缀列表创建Ecmp路由。 | 诊断 |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | 当前操作与弹性网卡的IP Prefix冲突。 | 诊断 |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | 此NAT网关的EIP绑定类型不支持此操作。 | 诊断 |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | 此操作不被允许，用户不在白名单。 | 诊断 |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | 当前地域不支持EIP绑定PrefixIp | 诊断 |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | VSwitchCidrReservationCidr参数格式非法 | 诊断 |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | 指定的VSwitch实例不存在 | 诊断 |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | 指定的ReservedType未支持 | 诊断 |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | 指定的VSwitch未开启Ipv6 | 诊断 |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | 指定的VSwitchCidrReservationCidr与已有的VSwitchCidrReservation网段冲突 | 诊断 |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | VSwitchCidrReservationMask和VSwitchCidrReservationCidr不能同时为空，请指定其中一个重试。 | 诊断 |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | VSwitchCidrReservationMask 参数不合法，请参考API文档参数说明修改后重试。 | 诊断 |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | VSwitchCidrReservationMask 超出配额，请参考API文档参数说明修改后重试。 | 诊断 |
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | 超过 VSwitchCidrReservation 的数量配额。 | 诊断 |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | 指定的 VSwitchCidrReservationMask 和 VSwitchCidrReservationCidr 冲突，请根据API文档参数说明修改后重试。 | 诊断 |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | 指定的vswitch已没有足够的cidr分配出CidrReservation。 | 诊断 |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | 弹性网卡状态不正确。 | 诊断 |
| 400 | RuleExist | The rule already exists. | 规则已存在。 | 诊断 |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | 传入的Ipv6AddressId和Ipv6InternetBandwidthId不属于同一实例 | 诊断 |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | 指定的Ipv6AddressId或Ipv6InternetBandwidthId不存在 | 诊断 |
| 400 | MissingParam.Tags | The Tags parameter is required. | Tags 参数是必需的。 | 诊断 |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | Ipv6InstanceId未指定 | 诊断 |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | 未找到指定的Ipv6Instance资源。 | 诊断 |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | 由于 financialLocked，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | 由于指定的带宽实例不存在，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | 由于指定的Bandwidth超过上限，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | 由于带宽实例处于非稳态，该操作被禁止。 | 诊断 |
| 400 | OperationFailed.RiskControl | Risk control check failed. | 我们检测到您的付款方式存在安全风险。请通过电子邮件或控制台消息中的链接继续验证，并在验证后重新提交订单。 | 诊断 |
| 400 | Price.SystemError | Price inquiry failed. | 询价失败，请稍后重试. | 诊断 |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | 账户没有设置支付方式或预留金额不足. | 诊断 |
| 400 | OrderError | Failed to create the order. | 创建订单失败，请稍后重试. | 诊断 |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | 指定的GatewayEndpoint不存在 | 诊断 |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | MaxResults 参数不合法。 | 诊断 |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | 指定的资源ID不存在。 | 诊断 |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | 您未完善个人基本信息，请完善信息后重新操作。 | 诊断 |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | 当前可用区已经存在默认交换机。 | 诊断 |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | 操作失败，默认VPC已存在。 | 诊断 |
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | 创建订单失败，因为并发操作。 | 诊断 |
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | 您尚未进行实名认证，请前往账号中心完成实名认证。 | 诊断 |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | 共享端口为已终止状态，无法修改vlan。 | 诊断 |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | 共享端口为欠费锁定状态，无法修改vlan。 | 诊断 |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | 指定的网络ACL和交换机没有关联关系 | 诊断 |
| 400 | InvalidInstanceId | vswitch does not exist. | vSwitch实例不存在。 | 诊断 |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | ECS绑定EIP失败，因为ECS实例不存在或不是VPC虚拟机. | 诊断 |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | 账号可用金额不足 | 诊断 |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | Tags参数缺失 | 诊断 |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | 指定的ResourceType未支持或不合法 | 诊断 |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | 指定的资源组非法或不存在 | 诊断 |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | 网关与路由表不在同一个VPC内不允许关联 | 诊断 |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_flowlog_public 无集团上云商品标签，不允许集团内部用户购买。 | 诊断 |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | 此路由器接口对端是VPC，此地域不支持创建此类型下一跳的IPV6路由。 | 诊断 |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | 由于该VPC未使能IPV6能力，操作被拒绝。 | 诊断 |
| 400 | Unauthorized | This api does not support sub user or role. | 此API不支持子用户或角色。 | 诊断 |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | NAT网关未使能私网连接。 | 诊断 |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | 本端IP地址参数有重复，请更换本端IP后重试。 | 诊断 |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | 对端IP地址参数有重复，请更换对端IP后重试。 | 诊断 |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | 本端IP地址参数有重复，请更换本端IP后重试。 | 诊断 |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | 本端网关IP和掩码非法，请更正后重试。 | 诊断 |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | 掩码非法，请更正后重试。 | 诊断 |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | 共享端口依然存在，无法终止此物理端口。 | 诊断 |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | 删除失败，需要共享端口的用户去删除。 | 诊断 |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | 删除失败，需要物理端口的用户去删除。 | 诊断 |
| 400 | Forbidden.VBRExists | The vbr still exists. | vbr仍然存在，无法删除端口。 | 诊断 |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | 网关路由表中不支持创建指向此实例类型的路由条目。 | 诊断 |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | BGP组中的每个BGP邻居可接收的路由条目数超过配额。 | 诊断 |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | 您的基本信息尚未完成，请先完成信息填写。 | 诊断 |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | 您当前quota配额不足，请您可以联系渠道伙伴为您增加额度 | 诊断 |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | Eip不能同时以NAT模式和多EIP网卡可见模式绑定ENI. | 诊断 |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | 绑定操作失败，因为ECS正在迁移。 | 诊断 |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | EIP绑定IP失败，因为该VPC未开启IPv4网关. | 诊断 |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | Ipv4Gateway状态处于非稳态 | 诊断 |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | 端口类型和带宽值不可同时为空。 | 诊断 |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | 当前的实例状态不支持该操作 | 诊断 |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | 给地址池添加地址段失败，因为缺少地址段或掩码参数。 | 诊断 |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | 给地址池添加地址段失败，因为地址段和地址掩码不能同时输入。 | 诊断 |
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | 操作HaVip没有权限，请到配额中心申请权限。 | 诊断 |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | 该VSwitch存在VSwitchCidrReservation使用中，不允许删除 | 诊断 |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | 指定的参数TagKey重复。 | 诊断 |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | 指定的参数TagValue不合规范。 | 诊断 |
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | 指定的参数TagKey不合规范。 | 诊断 |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | 指定的Asn不合规范。 | 诊断 |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | 您没有权限操作该资源，请您申请操作权限后再试。 | 诊断 |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | NAT网关没有full nat 表。 | 诊断 |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | 没有找到该full nat entry。 | 诊断 |
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | 指定的BGP配置不合规范 | 诊断 |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | 当 VPN 网关启用 BGP 时，VPN 连接必须启用 BGP。 | 诊断 |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | OrderMode参数非法 | 诊断 |
| 400 | Invalid.Grant | Can not grant to other owner cen. | 无法将VBR跨账号授权至其他CEN。 | 诊断 |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | 指定的路由条目类型不合规范。 | 诊断 |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | 接入认证时未找到指定区域。 | 诊断 |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | OrderMode参数非法 | 诊断 |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | 参数重复。 | 诊断 |
| 400 | MissingParam.%s | The param of %s is missing. | 参数缺失。 | 诊断 |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | Vpn网关没有开启IPsec VPN功能 | 诊断 |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | 指定的VPN连接名称不合规范。 | 诊断 |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | 不支持Vpconn类型。 | 诊断 |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | 指定路由表类型不允许创建路由条目 | 诊断 |
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | quota超限 | 诊断 |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | vlan id已经被使用 | 诊断 |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | VBR存在BGP宣告网段配置，不能删除VBR。 | 诊断 |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | 操作过于频繁，请稍等一会再重试 | 诊断 |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | 当前版本的VPN不支持设置策略路由条目优先级 | 诊断 |
| 400 | InvalidParams.NotNull | params must not null. | 参数不能为空 | 诊断 |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | 指定的BgpGroup LocalAsn无效，仅支持64512到65534或420000000到429496729 | 诊断 |
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | 请指出PeerIpAddress | 诊断 |
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | 对等IP地址正在使用，无法创建BGP对等。 | 诊断 |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | PeerAsn参数不合法 | 诊断 |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | LocalAsn参数不合法 | 诊断 |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | 操作不支持 | 诊断 |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | Price参数无效 | 诊断 |
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | InstanceChargeType参数无效 | 诊断 |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | Period参数无效 | 诊断 |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | Period参数无效 | 诊断 |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | 实例状态不允许 | 诊断 |
| 400 | InvalidAliuid | Invalid Aliuid. | Aliuid无效 | 诊断 |
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | 带宽包不足 | 诊断 |
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | 参数不能为null | 诊断 |
| 400 | INVAID.VBR.STATUS | VBR status must be active | VBR状态无效 | 诊断 |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | 请检查cen 状态 | 诊断 |
| 400 | ForbiddenAction | The user does not supported this action. | 用户权限不支持 | 诊断 |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | 不支持预付费的费用类型。 | 诊断 |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | 指定的RouterInterface Spec无效。 | 诊断 |
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | Vpc子网不存在。 | 诊断 |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | Healthcheck ip不能与实例ip相等。 | 诊断 |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | 健康检查IP无效 | 诊断 |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | 操作失败 | 诊断 |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | 跨域带宽包不合法 | 诊断 |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | VRouterType不合法 | 诊断 |
| 400 | IllegalParam.Spec | The spec is illegal. | spec不合法 | 诊断 |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | 用户无权创建跨境routerInterface | 诊断 |
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | RouterId参数无效 | 诊断 |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | Commodity不存在 | 诊断 |
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | 指定的RouterInterface ChargeType无效。 | 诊断 |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | regionId不合法 | 诊断 |
| 400 | QuotaExceeded | RiPerUser quota exceeded | 当前用户建立的对等连接路由器接口数量已达上限 | 诊断 |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | 参数错误 | 诊断 |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | ri不能附加cen | 诊断 |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | 指定的CidrReservation不存在，请确认 CidrReservation 的状态是否可用。 | 诊断 |
| 400 | IllegalParamFormat | The param of %s is illegal. | 指定的参数不合法 | 诊断 |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | VbrOwnerId参数非法 | 诊断 |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | VbrOwnerId为RAM账号或合作伙伴账号，禁止作为VBR所属账号 | 诊断 |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | 共享专线不允许为其他账号创建VBR | 诊断 |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | VBR带宽值与所属共享专线带宽值不一致 | 诊断 |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | Bandwidth参数非法 | 诊断 |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | 共享专线已创建一个VBR，无法继续创建 | 诊断 |
| 400 | IllegalParamFormat | IllegalParamFormat | 参数格式不正确 | 诊断 |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | Cidr格式不合法 | 诊断 |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | 无权限创建共享专线，请联系商务经理。 | 诊断 |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | 共享端口UID不能是RAM账号或者合作伙伴账号 | 诊断 |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | 单根物理端口上创建的共享端口配额超限 | 诊断 |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | ExpectSpec参数非法 | 诊断 |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | 只有共享端口所属的物理端口允许修改 | 诊断 |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | 只有共享端口所属的物理端口账号允许修改这些参数 | 诊断 |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | VBR已经被引用 | 诊断 |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | nqa存在，无法删除vbr | 诊断 |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | IpAddress参数不合法 | 诊断 |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | CidrBlock参数不合法 | 诊断 |
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | 参数缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能为空 | 诊断 |
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | vlanId已经被使用 | 诊断 |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | VBR超过配额 | 诊断 |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | 设备配额超限 | 诊断 |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | 地域不支持IPV6 | 诊断 |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | 带宽超限 | 诊断 |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | 访问设备已禁用，无法创建vbr。 | 诊断 |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | 内部错误 | 诊断 |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | 地址池实例未处于稳态，不允许分配EIP。 | 诊断 |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | BGP邻居IP地址重复。 | 诊断 |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | 无法分配EIP，因为IP地址池状态不对 | 诊断 |
| 400 | IllegalParam.Isp | The param of %s is illegal. | 无法分配EIP，因为ISP参数非法 | 诊断 |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | EIP绑定操作失败，因为此VPC下存在Ipv4网关 | 诊断 |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | 私网类型VPN网关不支持开启SSL功能。 | 诊断 |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | 网络类型不合法。 | 诊断 |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | dnat session 多对一的配额超限。 | 诊断 |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | 当前用户网关和路由存在冲突。 | 诊断 |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | Vpn操作存在冲突，请稍后重试。 | 诊断 |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | FullnatTableId和natGatewayId不能同时为空 | 诊断 |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | 指定的公网IP地址池实例不存在 | 诊断 |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | 公网IP地址池已经共享给其他用户，不允许删除。 | 诊断 |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | 该公网IP地址池实例是共享资源，不允许修改。 | 诊断 |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | 对端不存在。 | 诊断 |
| 400 | InvalidInstance.StatusError | The router instance status error. | 实例状态错误。 | 诊断 |
| 400 | Forbidden | The eip instance owner error | EIP 不属于当前调用者，请您检查该 EIP 是否可被您调用。 | 诊断 |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | 创建订单失败，因为token无效 | 诊断 |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | 操作托管的流日志，鉴权失败。 | 诊断 |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | peerIpAddress参数非法 | 诊断 |
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | 没有操作PhysicalConnectionId权限 | 诊断 |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | 修改的带宽参数不支持保存 | 诊断 |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | 不支持多物理连接带宽 | 诊断 |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | VBR带宽配额超限 | 诊断 |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | Bandwidth参数缺失 | 诊断 |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | Bandwidth参数不合法 | 诊断 |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | InstanceId参数缺失 | 诊断 |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | InstanceId参数无效 | 诊断 |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | 无法操作Vpconn | 诊断 |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | 不能跳过施工步骤进入下一步 | 诊断 |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | 指定的PhysicalConnectionId没有处于已分配状态 | 诊断 |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | 无效的参数PhysicalConnectionId | 诊断 |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | PhysicalConnectionId参数缺失 | 诊断 |
| 400 | MissingParam.AliUid | AliUid is missing. | AliUid参数缺失 | 诊断 |
| 400 | MissingParam.RegionNo | RegionNo is missing. | RegionNo参数缺失 | 诊断 |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | 存在Fullnat配置条目依赖此nat ip，因此本操作不能完成。 | 诊断 |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | 创建snat不可以使用绑定中的eip | 诊断 |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | nat网关状态不正确 | 诊断 |
| 400 | Forbidden | The eip instance owener error | EIP 不属于当前调用者，请您检查该 EIP 是否可被您调用。 | 诊断 |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | 请求冲突，请稍后重试。 | 诊断 |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | 不支持指定的IPsec Pfs | 诊断 |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | 至少有一种认证方法（Psk或者IDaas）应该被指定 | 诊断 |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | 当开启双因子认证时，IDaaS实例ID是必填的参数 | 诊断 |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | Vpn服务没有权限操作您的IDaaS实例 | 诊断 |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | 客户端 IP 池的网络掩码长度必须大于等于 16 且小于等于 29。 | 诊断 |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | 指定的客户端 IP 池与 VPN 连接或 SSL 服务端冲突。 | 诊断 |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | 此操作后添加 VPC 路由失败。 | 诊断 |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | 指定的IDaaS实例ID不存在 | 诊断 |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | 对该实例的操作过于频繁，请稍后重试。 | 诊断 |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | 指定的VPN实例未找到。 | 诊断 |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | 路由权重值不合法 | 诊断 |
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | 路由指定的下一跳不存在 | 诊断 |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | 指定的本端BGP的IP异常 | 诊断 |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | 指定的隧道CIDR异常 | 诊断 |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | 开启BGP时，隧道CIDR参数是必填项 | 诊断 |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | 创建的策略路由条数已达上限 | 诊断 |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | IPsec连接中指定的Pfs参数不支持 | 诊断 |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | IPsec连接中指定的认证算法不支持 | 诊断 |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | 当前版本的VPN不支持开启BGP | 诊断 |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | 参数非法，DNAT转发协议为Any时，源端口和目标端口必须为0 | 诊断 |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | 在访问鉴权时未找到指定的虚拟交换机 | 诊断 |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | 操作太频繁，请稍后重试 | 诊断 |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | 指定的路由条目未找到 | 诊断 |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | 指定的BGP配置不合法 | 诊断 |
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | 购买数量超出最大限额 | 诊断 |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | PmCertificateNo参数不合法 | 诊断 |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | 实例的状态无效 | 诊断 |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | vbr已经依赖BgpGroup,不能删除 | 诊断 |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | 配额超限 | 诊断 |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | status参数无效 | 诊断 |
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | 传入的IP地址不合法。 | 诊断 |
| 400 | IncorrectStatus.null | RouterInterface status is null. | RI状态为空 | 诊断 |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | 用户没有操作权限 | 诊断 |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | 创建ipv4网关失败，因为不支持ipv4网关特性 | 诊断 |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | 创建路由条目失败，因为vpn路由条目超出限制 | 诊断 |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | 创建路由条目失败，因为ECMP（Equal-Cost Multipath Routing）路由只支持一个非RI（non-ri）类型作为下一跳 | 诊断 |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | 修改网关路由条目失败，下一跳必须首先修改为local路由，才能自定义下一跳 | 诊断 |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | 当前可用区内无可用资源。 | 诊断 |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | 操作失败，只有自定义路由条目才支持通过路由条目id或路由条目名进行过滤 | 诊断 |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | 操作不支持，在金融云中不支持资源组id | 诊断 |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | vpcId数量超出限制 | 诊断 |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | 指定的签名随机数已经被使用 | 诊断 |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | 未找到指定的access key | 诊断 |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | 路由表和网关解绑操作失败，因为不存在绑定关系 | 诊断 |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | 无法找到指定的网关路由表 | 诊断 |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | 无法修改，因为指定的路由条目名称无效 | 诊断 |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | 无法修改路由表属性，表名格式无效 | 诊断 |
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | 未找到指定的网络Acl | 诊断 |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | 操作失败，因为ipv6网关仍在使用中 | 诊断 |
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | 无法找到要删除的附加网段 | 诊断 |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | 规则条目的名称长度非法 | 诊断 |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | 网络ACL规则条目超出限制 | 诊断 |
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | 规则条目名称非法 | 诊断 |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | dnat单ip端口段映射数超过限制值 | 诊断 |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | 参数TunnelCidr不合法。 | 诊断 |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | 当前TransitRouter不支持该操作，请升级TransitRouter后重试。 | 诊断 |
| 400 | IllegalParam.%s | The param of %s is illegal. | 指定的参数非法 | 诊断 |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | 您没有当前资源管理权限，请申请权限后重试。 | 诊断 |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | 参数缺失，Ipv6CidrBlock是必选参数 | 诊断 |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 当前CBN的状态不支持创建虚拟交换机（VSwitch）操作 | 诊断 |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | 参数缺失，vpcId是必选参数 | 诊断 |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | flowlog状态无效，无法停止 | 诊断 |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | 指定实例的状态无效 | 诊断 |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | 要指定的资源已经存在flowlog实例 | 诊断 |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | 指定的IP地址已经被其他资源使用 | 诊断 |
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | 指定的IP地址超出虚拟交换机（VSwitch）的CIDR段 | 诊断 |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | 该地域不支持ipv4网关 | 诊断 |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | 不允许创建ipv4网关，因为存在直通eip | 诊断 |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | 参数模式非法 | 诊断 |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | 操作失败，未找到vpc | 诊断 |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | 无法找到指定的VpcPeer | 诊断 |
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | 直通Eni不能作为下一跳 | 诊断 |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | CidrBlock掩码非法 | 诊断 |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | 地址池中IP数量配额超出限制。 | 诊断 |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | CidrBlock非法 | 诊断 |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | 待绑定的实例已经处于绑定状态了 | 诊断 |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | 指定的路由表状态不对 | 诊断 |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | 操作不允许，因为路由表类型不对 | 诊断 |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | 操作不允许，因为指定的ipv4网关未激活 | 诊断 |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | 指定的ipv4网关已经被绑定 | 诊断 |
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | 启动双因子认证时请输入IDaaSInstanceId参数。 | 诊断 |
| 404 | InstanceNotExists | Instance not exists. | 要删除的实例不存在 | 诊断 |
| 400 | Throttling.User | Request was denied due to user flow control. | 由于用户端流控，请求被拒绝 | 诊断 |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | 要删除的DNAT条目实例状态不对 | 诊断 |
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | 参数不匹配，请检查参数 | 诊断 |
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | 解绑EIP操作失败，因为SNAT或DNAT处于非稳定状态 | 诊断 |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | 您添加的网段不存在。 | 诊断 |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | dnat单ip限制端口段映射数必须小于64 | 诊断 |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | 制定操作被禁止，因为下一跳未发生改变 | 诊断 |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | 有依赖的保护性限速规则 | 诊断 |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | 该VPC下存在IPV4网关，无法删除。 | 诊断 |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | 共享带宽包中仍存在EIP，无法删除 | 诊断 |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | 资源删除保护不存在 | 诊断 |
| 400 | DeletionProtection.OwnerError | The resource owner error. | 您不是该资源的所有者，无法操作 | 诊断 |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | 资源删除保护已启用 | 诊断 |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | 不支持该类型资源 | 诊断 |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | 不支持预付费资源 | 诊断 |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | 资源不存在 | 诊断 |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | 操作过于频繁，任务冲突。 | 诊断 |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | 路由配置与IPsec服务端冲突。 | 诊断 |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | 路由条目与SSL客户端冲突。 | 诊断 |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | 无法删除Ipv4网关，因为存在到Ipv4网关的路由 | 诊断 |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | 未找到指定的Ipv4网关，无法删除 | 诊断 |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | 操作不允许，因为指定的Ipv4网关处于绑定状态 | 诊断 |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | 无法删除指定的路由表，因为表中仍然存在用户自定义路由条目。 | 诊断 |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | 无法删除指定的路由表，因为路由表绑定了网关 | 诊断 |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | 当前路由表的状态不支持删除操作 | 诊断 |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | 当前VPC中的DHCP选项集实例状态不支持删除VPC | 诊断 |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 当前CBN状态不支持删除虚拟交换机（VSwitch）操作 | 诊断 |
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | 权限校验过程中，未找到指定的虚拟交换机（vSwtich）实例 | 诊断 |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | 无法删除当前虚拟交换机（vSwitch），因为其他子网正在操作中。 | 诊断 |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | 不允许新建IPv4网关，因为VPC已经存在IPv4网关 | 诊断 |
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | 实例处于挂起状态下，不支持操作 | 诊断 |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | 额度不足,请联系您的渠道合作伙伴提升额度。 | 诊断 |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | 负载均衡ID不存在。 | 诊断 |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | 指定密钥不为空，无法清空密钥。 | 诊断 |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | VlanId已经被使用 | 诊断 |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | 没有该端口类型 | 诊断 |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | 专线绑定的带宽值无效 | 诊断 |
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | 专线的操作无效 | 诊断 |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | 专线的端口类型无效 | 诊断 |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | ClientToken参数不合法 | 诊断 |
| 400 | InvalidPortType.NotFound | Specified port type is not found. | 指定规格端口已无库存。 | 诊断 |
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | 参数Status无效 | 诊断 |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | Vpconn的AliUid参数不合法 | 诊断 |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | 参数Description值不合法 | 诊断 |
| 400 | InvalidName.Malformed | The specified Name is not valid. | 参数Name值不合法 | 诊断 |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | VlanId不合法 | 诊断 |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | Spec不合法 | 诊断 |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | 无法创建VPconn | 诊断 |
| 400 | MissingParam.Spec | The param of Spec is missing. | Spec参数缺失 | 诊断 |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | 操作不支持访问AccessDevice | 诊断 |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | 指定的VBR已经被绑定 | 诊断 |
| 400 | MissingParam.VbrId | You must specify VbrId. | vbrId缺失 | 诊断 |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | 存在依赖的BGP对端 | 诊断 |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | 健康检查IP不合法。 | 诊断 |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | 只有当HaVip的状态为可用或正在使用时，才能通过此操作操作HaVip | 诊断 |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | 添加指向客户端网段的路由失败，请查看VPC路由条目及相关配额。 | 诊断 |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | 当前客户端网段不可用。 | 诊断 |
| 400 | OperationFailed.AssociationExist | The association already exists. | 由于当前资源处于绑定中操作失败 | 诊断 |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | 当前vpn实例已与同类证书绑定。 | 诊断 |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | 客户端网段与VPC内其他资源冲突。 | 诊断 |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | 客户端网段（%s）不合法。 | 诊断 |
| 400 | VpnConnection.Configuring | The specified service is configuring. | 服务正在配置中，请您稍后再试。 | 诊断 |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | 目的地址不合法。 | 诊断 |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | 安全组已经被托管，不能使用 | 诊断 |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | 安全组不存在于此VPC。 | 诊断 |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId 和 natGatewayId 不能同时为空 | 诊断 |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId 和 natGateway不能同时为空 | 诊断 |
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId 和 natGatewayId 不能同时为空 | 诊断 |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | VBR已绑定PCONN。 | 诊断 |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | 传入的trafficPath参数非法。 | 诊断 |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | 传入的trafficPath参数中存在重复的数值。 | 诊断 |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | Ipv6地址资源不足。 | 诊断 |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | 参数natGatewayId不合法。 | 诊断 |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT有依赖的终端节点服务，所以此操作不能进行 | 诊断 |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT有依赖的路由条目，所以此操作不能进行 | 诊断 |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | 有依赖的NAT IP，所以此操作不能进行 | 诊断 |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT有依赖的NAT IP CIDR，所以此操作不能进行 | 诊断 |
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | 此IP已经被DNAT使用，不能用于SNAT。 | 诊断 |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | 此源IP不能被使用，因为已经用于SNAT | 诊断 |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | 此FULLNAT规则已经存在 | 诊断 |
| 400 | Instance.StatusError | The status of instance error. | 实例状态错误。 | 诊断 |
| 404 | VRouterId.NotFound | The VRouter not found. | 此VRouter实例未找到。 | 诊断 |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | 本用户暂不支持自定义流日志trafficPath功能。 | 诊断 |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | 不允许操作系统PrefixList | 诊断 |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | 按量计费NAT网关的规格不支持修改 | 诊断 |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | prefixList最大路由条目数超过关联的路由表允许的最大路由条目 | 诊断 |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | 您在路由条目中指定的目的IPV6地址包含在vSwitch交换机网段内。 | 诊断 |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | 该可用区不支持防护型NAT网关。 | 诊断 |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | 当前vpc下创建增强型nat网关配额超限 | 诊断 |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | 路由条目中指定的目标IPv6网段与vSwitch网段重叠。 | 诊断 |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | 当前虚拟交换机下的可用私网IP不足 | 诊断 |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | 无法创建DDoS防护（增强版）Eip，因为没有购买DDoS原生防护服务 | 诊断 |
| 404 | Instance.NotExist | The instance not exist. | 实例不存在。 | 诊断 |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | PrefixList处于中间态，无法操作 | 诊断 |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | 由于PrefixList还存在引用关系，所以无法删除PrefixList | 诊断 |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | 由于PrefixList存在共享关系，所以无法删除PrefixList | 诊断 |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | 无法操作共享PrefixList | 诊断 |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | 删除cidr数量超过，prefixList拥有的数量 | 诊断 |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | 该地域不支持PrefixList类型路由 | 诊断 |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | 无法操作系统PrefixList | 诊断 |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | 操作失败，PrefixList不存在该引用关系 | 诊断 |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | FullNat表不存在 | 诊断 |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | prefixList允许的最大路由条目数量超过限制 | 诊断 |
| 400 | InvalidDescription.Malformed | The Description is illegal. | 指定的资源描述格式不合法。长度为2-256个字符，不能以http://和https://开头。 | 诊断 |
| 400 | InvalidName.Malformed | The attribute name is illegal. | 该名称格式不合法。 | 诊断 |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | 输入的ipVersion不支持 | 诊断 |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | 传入的最大entryCount超过阈值 | 诊断 |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | 用户传入的cidr数量超过cidrMaxCount | 诊断 |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | cidrBlock参数非法 | 诊断 |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | 输入的cidrName非法 | 诊断 |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | 用户可创建的prefixList超过阈值 | 诊断 |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | 无法操作系统prefixList | 诊断 |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | 无法删除共享PrefixList | 诊断 |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | 采样间隔参数输入不合法 | 诊断 |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | 绑定资源不存在。 | 诊断 |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | 网关路由表不存在 | 诊断 |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | 目标IP端口被映射数超过配额。 | 诊断 |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | Vpconn的AliUid不合法 | 诊断 |
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | 路由器接口规格无效 | 诊断 |
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | 实例owner错误 | 诊断 |
| 400 | Forbbiden | The router does not belong to your account. | 该路由器不属于您的账号。 | 诊断 |
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | 编辑路由器接口参数不合法。 | 诊断 |
| 400 | InvalidName.Malformd | The attribute name is illegal. | 属性名称不合法 | 诊断 |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | 该地域不属于该服务接入域名管理 | 诊断 |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | BondRi Connection 不存在 | 诊断 |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | 指定的vbr还在使用 | 诊断 |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | 不允许操作，该实例属于托管资源。 | 诊断 |
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | 带宽资源不足 | 诊断 |
| 400 | OrderError.EIP | The Account failed to create order. | 下单失败 | 诊断 |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | 下一跳弹性网卡不存在 | 诊断 |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | 下一跳实例不存在 | 诊断 |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | 传入的目标地址不合法 | 诊断 |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | 该实例不存在 | 诊断 |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | NatIp资源找不到。 | 诊断 |
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | 检测到您近期存在频繁购买和释放EIP的行为，暂时无法进行新购。 | 诊断 |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | 存在重复的路由地址块 | 诊断 |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | 操作失败，因为未开通出云流量服务。 | 诊断 |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | 下一跳实例不存在 | 诊断 |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | 依赖冲突，存在自定义路由表。 | 诊断 |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | 默认交换机已存在。 | 诊断 |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | 不允许金融云帐号和普通帐号间创建vpc互联。 | 诊断 |
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM校验不通过。 | 诊断 |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | 不允许在自定义路由表上创建IPv6路由。 | 诊断 |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | 您已达到最大购买量。 | 诊断 |
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | 您的账户类型不支持此次交易 | 诊断 |
| 400 | Forbidden.Convert | User does not have permission to operate. | 该用户没有权限操作。 | 诊断 |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | 指定的路由表已经被绑定。 | 诊断 |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | 操作失败，因为VBR已关联到CEN。 | 诊断 |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | 账户中没有有效的支付方式。 | 诊断 |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | 指定操作被禁止，因为路由器接口来自不同的可用区。 | 诊断 |
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | 指定vpc不存在。 | 诊断 |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | 指定的流量镜像源和会话已经绑定。 | 诊断 |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | 指定的流量镜像源和会话不存在绑定关系。 | 诊断 |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | 指定操作被禁止，因为可用区是云盒类型的。 | 诊断 |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | 指定操作不允许，因为路由表存在下一跳指向云盒VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | 指定操作不允许，因为路由表存在下一跳指向非本云盒VBR的路由条目。 | 诊断 |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | 指定操作被禁止，因为虚拟交换机是云盒类型的。 | 诊断 |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | 指定操作被禁止，因为只有自定义路由表能够添加下一跳指向云盒类型VBR的路由条目。 | 诊断 |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | 云盒不支持创建高可用vip。 | 诊断 |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | 指定的网卡未绑定任何ECS实例。 | 诊断 |
| 400 | UnsupportedRegion | The feature is not supported in current region. | 当前地域不支持该功能。 | 诊断 |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | 指定的ECS实例不存在。 | 诊断 |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | 指定的SLB不存在。 | 诊断 |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | 指定的SLB不属于任何一个VPC。 | 诊断 |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | ECS实例不支持流量镜像功能。 | 诊断 |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | 流量镜像会话数量超限。 | 诊断 |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | 流量镜像筛选条件所关联的镜像会话数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | 每个流量镜像会话所允许关联的源的数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | 单个网卡所能关联的流量镜像会话数量配额超限。 | 诊断 |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | 单个SLB所能关联的流量镜像会话数量配额超限。 | 诊断 |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | 指定的流量镜像会话不存在。 | 诊断 |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | 流量镜像筛选规则实例id参数未指定。 | 诊断 |
| 400 | MissingParam.Rules | You must specify rule instance ID. | 流量镜像筛选规则实例id未指定。 | 诊断 |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | 流量镜像筛选规则参数个数非法。 | 诊断 |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | 流量镜像筛选规则实例Id参数非法。 | 诊断 |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | 流量镜像源实例id参数未指定。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | 流量镜像会话状态不正确。 | 诊断 |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | 单个流量镜像筛选条件所关联的筛选规则数量配额超限。 | 诊断 |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | 指定的流量镜像筛选规则不存在。 | 诊断 |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | 网卡不能同时作为流量镜像会话的源和目的。 | 诊断 |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | 指定的网卡不存在。 | 诊断 |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | 目的CIDR格式不正确。 | 诊断 |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | 源CIDR参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | 源端口范围参数格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | 目的端口范围参数格式不合法。 | 诊断 |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | 筛选条件实例id参数未指定。 | 诊断 |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | 指定的流量镜像筛选条件不存在。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | 流量镜像筛选条件的状态不正确。 | 诊断 |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | 流量镜像筛选规则的状态不正确。 | 诊断 |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | 存在流量镜像会话仍依赖于当前资源。 | 诊断 |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | 流量镜像筛选规则未指定。 | 诊断 |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | 入方向筛选规则的数量不合法。 | 诊断 |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | 出方向筛选规则数量不合法。 | 诊断 |
| 400 | MissingParam.Priority | You must specify Priority. | 优先级参数未指定。 | 诊断 |
| 400 | MissingParam.Protocol | You must specify Protocol. | 协议参数未指定。 | 诊断 |
| 400 | MissingParam.Action | You must specify Action. | 动作参数未指定。 | 诊断 |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | 目的CIDR未指定。 | 诊断 |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | 源CIDR未指定。 | 诊断 |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | 优先级参数不合法。 | 诊断 |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | 协议参数不合法。 | 诊断 |
| 400 | IllegalParam.Action | The specified Action is invalid. | 动作参数不合法。 | 诊断 |
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | EIP与绑定实例的region需一致 | 诊断 |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | 不允许指定绑定了多个IPV6地址的下一跳。 | 诊断 |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | 参数ShareType不合法。 | 诊断 |
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | 指定的vswitch不存在。 | 诊断 |