错误码
|
HTTP status code |
错误码 |
错误信息 |
描述 |
操作 |
| 400 | Conflict.AllowedPrefixes | The allowed route prefixes [%s] is conflict. | 当前配置的路由前缀已存在,请确认后重新提交。 | 诊断 |
| 400 | Conflict.ASNOfECR | ASN already used by other ECR. | 指定的ASN被其它专线网关占用,请换成其它未使用的ASN。 | 诊断 |
| 400 | Conflict.ASNOfVBR | ASN already used by other VBR. | 当前VBR BgpGroup localAsn与ECR asn不一致,请调整一致后重新绑定。 | 诊断 |
| 400 | Conflict.Lock | There are other unfinished operations. | 您当前有其他未完成的操作,请稍后重试 | 诊断 |
| 400 | DeviceNotSupport.EcrVbrHa | The access device where the VBR is located does not support configuring a switching group. | VBR所处的接入设备不支持配置倒换组。 | 诊断 |
| 400 | ExclusiveParam.TransitRouterIdAndVpcId | A private network instance cannot be bound to a forwarding router instance at the same time. | 专有网络实例与转发路由器实例无法同时绑定,请调整后选择其中一个实例进行绑定 | 诊断 |
| 400 | IllegalParam.%s | The param of %s is illegal. | 参数非法 | 诊断 |
| 400 | IllegalParam.AlibabaSideAsn | The entered Bgp Asn is incorrect. | 当前输入的BgpAsn不正确,请检查后重新输入 | 诊断 |
| 400 | IllegalParam.EcrOwnerAliUid | The Ecr instance account parameter is invalid. | 该专线网关实例账号为非法参数,请核对后重新输入 | 诊断 |
| 400 | IllegalParam.InstanceOwnerId | Specified parameter InstanceOwnerId is not valid. | 该实例账号为非法参数,请核对后重新输入 | 诊断 |
| 400 | IllegalParam.RegionId | Area parameter invalid. | 区域参数非法 | 诊断 |
| 400 | IllegalParam.TransitMode | The transmission mode parameter is invalid. | 传输模式参数非法 | 诊断 |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | 参数格式非法 | 诊断 |
| 400 | IllegalParamFormat.AllowedPrefixes | The prefix parameter format is invalid. Procedure. | 指定的前缀路由网段格式错误。 | 诊断 |
| 400 | IllegalParamFormat.CenId | The format of the entered Cen instance ID is incorrect. | 当前输入的Cen实例ID格式不正确 | 诊断 |
| 400 | IllegalParamFormat.DestinationCidrBlock | The format of the specified destination Cidr route parameter is incorrect. | 您当前指定的目的Cidr路由参数格式错误,请核对后重新输入。 | 诊断 |
| 400 | IllegalParamSize.AllowedPrefixes | The number of prefix routes exceeded the quota. | 您当前输入的前缀路由数量超过配额,请申请扩容。 | 诊断 |
| 400 | IncorrectStatus.Ecr | Ecr Status does not allow current operation. | 专线网关实例状态不允许当前操作。目前有其它操作正在执行或者专线网关实例正在被删除,请求稍后再试 | 诊断 |
| 400 | IncorrectStatus.EcrAssociation | Ecr Association Status does not allow current operation. | ECR Association实例不允许当前操作。请在进行中的操作完成后,重试 | 诊断 |
| 400 | IncorrectStatus.EcrFlowLog | The status of the FlowLog is incorrect. | FlowLog 当前状态不支持移动资源组,请等待状态恢复后重试。 | 诊断 |
| 400 | IncorrectStatus.EcrGrantedInstance | The status of the granted instance is incorrect. | 授权实例当前状态不支持撤销,请等待状态恢复后重试。 | 诊断 |
| 400 | IncorrectStatus.HaVbrGroup | The current state of the switching group is not steady state, please try again later. | 当前倒换组状态不为稳态,请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.RouteEntry | The status of the route entry is incorrect. | 路由条目当前状态不支持该操作,请等待路由条目恢复稳定状态后重试。 | 诊断 |
| 400 | IncorrectStatus.Vbr | The current VBR is not in steady state, please try again later. | 当前VBR不处于稳态,请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.Vpc | The status of the VPC is incorrect. | VPC 当前状态不支持该操作,请等待 VPC 恢复稳定状态后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcOperating | The VPC is operating and does not support this operation. | VPC 正在执行其他操作,请等待操作完成后重试。 | 诊断 |
| 400 | IncorrectStatus.Vswitch | The status of the vSwitch is incorrect. | 交换机当前状态不支持该操作,请等待交换机恢复稳定状态后重试。 | 诊断 |
| 400 | InternalErrorTemp | The request processing has failed due to some unknown error. | 内部错误。建议重试,如果多次重试报错请提交工单。 | 诊断 |
| 400 | MissingParam.%s | The param of %s is missing. | 请求参数未填写,请核对对应的参数后重试。 | 诊断 |
| 400 | OperationDenied.AlreadyHaveDefaultMED | The operation is not allowed because the default MED already exists. | 已存在默认 MED,无法重复设置,请先修改或删除已有的默认 MED。 | 诊断 |
| 400 | OperationDenied.AttachmentInCurrentRegionExisted | Only one forwarding router can be bound to an area. | 当前操作被拒绝,专线网关实例在同一区域内只支持绑定一个转发路由器 | 诊断 |
| 400 | OperationDenied.CrossAccountAttaching | If the forwarding router is bound to another account, perform this operation on the same account. | 当前操作被拒绝,绑定其他账号转发路由器时,需在该账号做此操作 | 诊断 |
| 400 | OperationDenied.CrossAccountDisassociating | Unbind cross-account. | 当前操作被拒绝,需在跨账号页面解除绑定操作后再执行此操作 | 诊断 |
| 400 | OperationDenied.CrossAccountTrAssociationExist | The operation is not allowed because a cross-account TR association exists. | 存在跨账号 TR 关联,无法强制删除专线网关,请先解除跨账号 TR 关联。 | 诊断 |
| 400 | OperationDenied.CrossBidAssociating | Cross-border binding of resources is subject to compliance constraints. | 您当前的绑定资源涉及跨中国站点资源和海外站点资源互通,受限于合规约束请联系您的商务经理沟通处理。 | 诊断 |
| 400 | OperationDenied.EcrAttachmentExisted | Ecr and TR have been linked. | 当前操作被拒绝,专线网关实例与TR已建立链接,请解除后再执行此操作。 | 诊断 |
| 400 | OperationDenied.ForceDeleting | The current instance is being deleted. | 您当前操作被拒绝,专线网关实例正在被强制删除,请稍后再试 | 诊断 |
| 400 | OperationDenied.InstanceStatusInvalid | The operation is not allowed because the VBR is in an invalid state. | VBR 当前状态不允许该操作,请等待 VBR 状态恢复正常后重试。 | 诊断 |
| 400 | OperationDenied.InterfaceAndRouterNotMatch | The operation is not allowed because the interface does not match the router. | 指定的接口与路由器(VBR)不匹配,请检查接口与 VBR 的对应关系后重试。 | 诊断 |
| 400 | OperationDenied.InvalidVbrStatus | Invalid virtual border router status. | 无效的边界路由器状态,请确认边界路由器状态正常后重试。 | 诊断 |
| 400 | OperationDenied.NotAllowedModifyMED | The operation is not allowed to modify the MED of the association. | 当前关联不允许修改 MED,请检查关联类型与状态。 | 诊断 |
| 400 | OperationDenied.NotGrantedByNodeOwner | The node owner is not authorized. | 您当前操作被拒绝,专线网关产品未授权 | 诊断 |
| 400 | OperationDenied.NotSupportForceDelete | The operation is not allowed because force deletion is not supported for this attachment. | 该关联不支持强制删除,请按常规流程先清理依赖再删除。 | 诊断 |
| 400 | OperationDenied.OnlyTRSupportMED | The operation is not allowed because only TR associations support MED configuration. | 仅 TR 类型的关联支持修改 MED,请对 TR 关联执行该操作。 | 诊断 |
| 400 | OperationDenied.VbrAlreadyAttachedToCen | VBR has already attached to CEN. | 边界路由器已经绑定了云企业网, 请先将边界路由器从云企业网中删除后重试。 | 诊断 |
| 400 | OperationDenied.VbrAlreadyAttachedToEcr | VBR has already attached to ECR. | 边界路由器已经关联了专线网关,先将边界路由器从专线网关中删除后重试。 | 诊断 |
| 400 | OperationDenied.VbrDoesNotSupportMpbgp | The VBR does not support Mpbgp configuration. | 操作被拒绝,VBR暂不支持Mpbgp, | 诊断 |
| 400 | OperationDenied.VbrHasBgpGroupInMiddleStatus | The operation is not allowed because of VBR has BGP group in middle status. | 当前操作无法正常执行,边界路由器中存在BGP组处于配置生效中,请等待生效后重试。 | 诊断 |
| 400 | OperationDenied.VbrHasRouteEntryInMiddleStatus | The operation is not allowed because of VBR has route entry in middle status. | 当前操作无法正常执行,边界路由器中存在路由条目处于配置生效中,请等待生效后重试。 | 诊断 |
| 400 | OperationDenied.VbrNotAllowOtherOwnerEcr | The operation is not allowed because the VBR cannot be attached to an Express Connect Router of another account. | 该 VBR 不允许挂载到其他账号的专线网关,请使用同账号专线网关或先完成跨账号授权。 | 诊断 |
| 400 | OperationDenied.VbrSiteLinkEnableNotAllow | The operation is not allowed because site link is enabled on the VBR. | 该 VBR 已开启IDC间业务访问,不支持当前操作,请先关闭IDC间业务访问。 | 诊断 |
| 400 | OperationDenied.VbrUsedInVbrHa | The border router has been used by the switching group and cannot be bound to the leased line gateway. | 卸载失败,边界路由器已关联倒换组。卸载前请先解除关联的倒换组。 | 诊断 |
| 400 | OperationDenied.ViolateRegionMutuallyExclusive | The operation is not allowed because the region violates the mutually exclusive constraint. | 违反地域互斥约束,该地域不能与已关联地域同时挂载到同一专线网关。 | 诊断 |
| 400 | OperationFailed.AlreadyExistPropagationSource | The operation failed because an existing propagation source is already configured for the instance. | 该实例已存在路由传播源,无法重复加载到专线网关。 | 诊断 |
| 400 | OperationFailed.AttachmentStillInUse | The operation is not allowed because the attachment is still referenced by dependent resources. | 该关联仍被下游资源(流日志/路由表关联或传播/路由条目/前缀列表/组播/策略表)占用,无法删除。 | 诊断 |
| 400 | OperationFailed.CallingEcYaochi | EC Yaochi component returned an error. | 操作失败,内部EC瑶池组件返回错误 | 诊断 |
| 400 | OperationFailed.CallingVpcYaochi | The system is abnormal. Please try again later. | 操作失败,系统内部异常,请稍后重试,若重试仍失败请联系您的商务经理获取帮助。 | 诊断 |
| 400 | OperationFailed.CdtCrossBoarderNotOpened | The Cdt cross-border transmission function is disabled. | 当前操作失败,未开启阿里云数据跨境传输功能 | 诊断 |
| 400 | OperationFailed.CdtNotOpened | The Cdt function is disabled. | 当前操作失败,未开启阿里云数据传输功能 | 诊断 |
| 400 | OperationFailed.CloudBoxVbrExist | The operation is not allowed because a CloudBox VBR already exists on this ECR association. | 该关联上已存在云盒 VBR,无法继续该操作。 | 诊断 |
| 400 | OperationFailed.CloudBoxVSwitchExist | The operation failed because the VPC contains a CloudBox vSwitch. | 该 VPC 下存在云盒(CloudBox)交换机,暂不支持加载到专线网关。 | 诊断 |
| 400 | OperationFailed.CrossBorderNotAllowed | There is no qualification for creating cross-border links. | 操作失败,当前企业不具备创建跨境链路权限,请联系您的商务经理添加此权限。 | 诊断 |
| 400 | OperationFailed.NonEcrDynamicRouteEntryExist | The operation is not allowed because non-ECR dynamic route entries still exist. | VPC 路由表中仍存在非 ECR 的动态路由条目,无法解除关联。 | 诊断 |
| 400 | OperationFailed.NoRouteTableInVpc | The operation failed because no system route table is found in the VPC. | 该 VPC 下未找到系统路由表,无法建立关联。 | 诊断 |
| 400 | OperationFailed.NotSupportAcrossAccount | Switching groups cannot be formed across account sub-instances. | 不支持跨账号子实例形成倒换组。 | 诊断 |
| 400 | OperationFailed.NotSupportAcrossRegion | Switching groups cannot be formed across regional sub-instances. | 不支持跨地域子实例形成倒换组。 | 诊断 |
| 400 | OperationFailed.OpenEcrFlowLogServiceFailed | Failed to activate the ECR FlowLog service. | 开通专线网关 FlowLog 服务失败,请检查商品开通状态后重试。 | 诊断 |
| 400 | OperationFailed.OperateSharedVpc | The operation failed because the VPC is a shared resource. | 不允许操作被共享授权的 VPC,请由 VPC 属主账号执行该操作。 | 诊断 |
| 400 | OperationFailed.RejectedByEcYaochi | The request was rejected by Ec Yaochi. | 当前操作失败,Ec瑶池拒绝了您的请求 | 诊断 |
| 400 | OperationFailed.RejectedByVpcYaochi | Vpc Yaochi has rejected your current request. | 操作失败,Vpc瑶池拒绝了您当前请求 | 诊断 |
| 400 | OperationFailed.RouteMapConfigNotExist | The operation failed because the route map configuration does not exist. | 路由策略配置不存在,请确认 RouteMap 已正确创建。 | 诊断 |
| 400 | OperationFailed.TrServiceExpired | The operation is not allowed because the Transit Router service has expired. | 转发路由器(TR)服务已到期/欠费,请续费后重试。 | 诊断 |
| 400 | OperationFailed.TrServiceNotOpened | The operation is not allowed because the Transit Router service is not opened. | 转发路由器(TR)服务尚未开通,请先开通后重试。 | 诊断 |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | VPC还有静态路由指向ECR,不允许解除关联 ECR | 诊断 |
| 400 | OperationFailed.UserNotInWhiteList | The current user is not in the whitelist. | 专线网关产品通过白名单开放,当前用户没有操作权限。请联系客服人员将当前用户添加至白名单。 | 诊断 |
| 400 | OperationFailed.VbrAccessDeviceSame | The VBR on the same access device cannot be added to a switching group. | 处于同一台接入设备的VBR不能加入到一个倒换组中。 | 诊断 |
| 400 | OperationFailed.VbrBgpGroupLocalAsnNotSupport | The BGP group AS number of the VBR configuration in the switching group is not supported. | 倒换组中的VBR配置的BGP组AS号不支持。 | 诊断 |
| 400 | OperationFailed.VbrBgpGroupLocalAsnNotTheSameWithEcr | The AS number of the BGP group of the VBR added to the switching group is different from the AS number of the ECR. | 加入倒换组中的VBR的BGP组的AS号和ECR的AS号不相同。 | 诊断 |
| 400 | OperationFailed.VbrBgpGroupLocalAsnNotTheSameWithOther | The BGP group AS number of the VBR configuration in the switching group is not exactly the same. | 加入倒换组中的VBR的BGP组的AS号不完全相同。 | 诊断 |
| 400 | OperationFailed.VbrBgpPeerNotEnableBfd | The configured BGP PEER of the input VBR in the switching group does not enable BFD. | 输入的倒换组中的VBR,配置的BGP PEER没有使能BFD。 | 诊断 |
| 400 | OperationFailed.VbrEcrNotConsistent | The VBR in the switching group is not bound to the same ECR. | 倒换组中的VBR没有绑定到同一个ECR中。 | 诊断 |
| 400 | OperationFailed.VbrEcrNotRelation | The VBR in the switching group is not bound to ECR. | 倒换组中的VBR没有绑定到ECR。 | 诊断 |
| 400 | OperationFailed.VbrInUsedByOtherHa | The VBR in the input switching group is already in another switching group. | 输入的倒换组中的VBR已经在其他倒换组中。 | 诊断 |
| 400 | QuotaExceeded.ChildInstanceNum | The number of sub-instances in the switching group exceeds threshold. | 倒换组中子实例的数量超过阈值。 | 诊断 |
| 400 | QuotaExceeded.EcrCountPerUser | ECR Quota Exceeded. | 您可创建的专线网关实例数量已达到配额上限,请联系您的商务经理申请更大的配额数量 | 诊断 |
| 400 | QuotaExceeded.EcrRouteMapCountPerEcr | The maximum number of route map associations per Express Connect Router is exceeded. | 单个专线网关的路由策略关联数量已达上限。 | 诊断 |
| 400 | QuotaExceeded.GrantCountPerVpc | The maximum number of grants for the VPC is exceeded. | 单个 VPC 授权给专线网关/CEN 的数量已达上限。 | 诊断 |
| 400 | QuotaExceeded.TrCountPerEcr | The number of TR bound to the ECR exceeds the quota. | 单个专线网关实例可绑定的TR数量已达到配额上限,请联系您的商务经理申请更大的配额数量 | 诊断 |
| 400 | QuotaExceeded.VpcCountPerEcr | The number of VPC bound to the ECR exceeds the quota. | 单个专线网关实例可绑定的VPC数量已达到配额上限,请联系您的商务经理申请更大的配额数量 | 诊断 |
| 400 | ResourceAlreadyExist.ChildInstanceId | The specified resource of ChildInstanceId already exists. | 指定的资源已经关联到专线网关 ECR, 请核对后重试。 | 诊断 |
| 400 | ResourceAlreadyExist.FlowLogId | The specified resource of FlowLogId[%s] already exists. | 创建的流日志已经存在, 请核对后重试。 | 诊断 |
| 400 | ResourceAlreadyExist.TransitRouterId | The specified resource of transit router already exists. | 指定的 TR 资源已经关联到专线网关 ECR, 请核对后重试。 | 诊断 |
| 400 | ResourceAlreadyExist.VpcId | The specified resource of VpcId already exists. | 指定的 VPC 资源已经关联到专线网关 ECR, 请核对后重试。 | 诊断 |
| 400 | ResourceInConfiguring.NodeId | The current subInstance is not in steady state, please try again later. | 当前子实例不处于稳态,请稍后重试。 | 诊断 |
| 400 | ResourceInCreating.NexthopInstanceId | The next hop instance is being created. | 您当前所指的下一跳实例正在创建中 | 诊断 |
| 400 | ResourceInUse.ChildInstance | The specified resource of ChildInstance is in use. | 当前专线网关绑定的VBR未关闭Flowlog,请尝试关闭对应VBR的Flowlog后,再次发起卸载VBR操作。 | 诊断 |
| 400 | ResourceInUse.Ecr | The express connect router is currently in use. | 专线网关实例当前正在被使用,请解除VBR/VPC/TR关联后重试。 | 诊断 |
| 400 | ResourceInUse.HaVbrGroup | The specified resource of %s is in use. | 边界路由器还在倒换组中,请退出倒换组后重试。 | 诊断 |
| 404 | ResourceNotFound.AssociationId | EcrAssociationId not found. | ECR Association实例不存在 | 诊断 |
| 400 | ResourceNotFound.CenId | CenId not found. | Cen实例不存在 | 诊断 |
| 404 | ResourceNotFound.EcrId | EcrId not found. | ECR实例不存在 | 诊断 |
| 400 | ResourceNotFound.InstanceId | The instance id does not exist. | 当前输入的VPC/TR实例不存在 | 诊断 |
| 400 | ResourceNotFound.NexthopInstanceId | The next hop instance does not exist. | 下一跳实例不存在 | 诊断 |
| 400 | ResourceNotFound.ResourceId | The ResourceId is not found. | 指定资源不存在,请检查 ResourceId 与 ResourceType 是否匹配。 | 诊断 |
| 400 | ResourceNotFound.TrId | TRId not found. | TR实例不存在 | 诊断 |
| 400 | ResourceNotFound.VbrId | The VbrId is not found. | 指定的 VBR 不存在,请检查 VbrId、所属地域与账号是否正确。 | 诊断 |
| 400 | ResourceNotFound.VpcId | The VpcId is not found. | 指定的 VPC 不存在,请检查 VpcId、所属地域与账号是否正确。 | 诊断 |
| 400 | UnsupportedFeature.JumboFrame | The region where the sub-instance is located does not support the jumbo frame feature and cannot be attached to the express connect router. | 子实例所在的地域不支持巨型帧特性,无法加载到专线网关中。 | 诊断 |
| 400 | UnsupportedRegion | Feature not supported in specified region. | 指定的地域当前不支持专线网关功能。 | 诊断 |
| 400 | UnsupportedRegion.FlowLog | The region where the VBR is located does not support ECR FlowLog. | VBR所属地域不支持ECR FlowLog | 诊断 |
该文章对您有帮助吗?