错误码
|
HTTP status code |
错误码 |
错误信息 |
描述 |
操作 |
| 500 | Common.Timeout | Timeout, please narrow your input time range. | 接口请求超时,可能是因为您一次性请求的数量过多,请尝试缩小您的请求范围 | 诊断 |
| 404 | DiagnosticItemSetId.NotFound | The specified DiagnosticItemSetId is not found. | 参数DiagnosticItemSetId不存在 | 诊断 |
| 404 | DiagnosticItemSetId.NotFound | The specified diagnosticItemSetId of %s is not found. | 参数 %s 不存在 | 诊断 |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | 参数检查通过 | 诊断 |
| 400 | Duplicate.TagKey | The Tag.N.Key contains duplicate keys. | Tag的包含重复的key。 | 诊断 |
| 400 | DuplicatedParam.Type | The Type(%s) parameter is duplicate. | 该Type(%s)参数重复。 | 诊断 |
| 400 | DuplicatedParam.ActionId | The current field (%s) is duplicated. | 当前字段(%s)已重复. | 诊断 |
| 400 | DuplicatedParam.AddIps | The specified AddIps parameter contains existing IP. | 指定的AddIps参数中包含已存在的IP。 | 诊断 |
| 400 | DuplicatedParam.Channel | The Channel is duplicated. | Channel重复传入。 | 诊断 |
| 400 | DuplicatedParam.DataSourceId | The flowlog has been bound to the traffic analyzer and cannot be bound repeatedly. | 该flowlog已绑定了流量分析器,不可重复绑定. | 诊断 |
| 400 | DuplicatedParam.Filter | The specified Filter(%s) parameter has a duplicate Key. | 指定的Filter(%s)参数存在重复Key。 | 诊断 |
| 400 | DuplicatedParam.GroupBy | Duplicate data exists for the specified GroupBy(%s) parameter. | 指定的GroupBy(%s)参数存在重复数据。 | 诊断 |
| 400 | DuplicatedParam.InspectionReportId | Specified InspectionReportId(%s) duplicated in task. | 指定的InspectionReportId(%s)在任务中重复. | 诊断 |
| 400 | DuplicatedParam.Route | The destination route (%s) must be unique. | 目标路由(%s)不可重复。 | 诊断 |
| 400 | DuplicatedParam.TupleDimension | Duplicate data exists for the specified TupleDimension(%s) parameter. | 指定的TupleDimension(%s)参数存在重复数据。 | 诊断 |
| 400 | DuplicatedParam.Type | The Type(%s) parameter is duplicate. | 该Type(%s)参数重复。 | 诊断 |
| 400 | Flowlog.AlreayExist | This attachment already has existed flowlog instance. | 此连接的流日志已打开。 | 诊断 |
| 403 | Forbidden.GetCmsService | The user does not have permission to access the (cms:GetCmsService) service. | 用户无权限访问(cms:GetCmsService)服务。 | 诊断 |
| 403 | Forbidden | You are not authorized to operate on the specified resource. Contact the administrator to acquire the permission of AliyunNISReadOnlyAccess or AliyunNISFullAccess. | 您无权限对该资源进行此操作,请联系管理员授权AliyunNISReadOnlyAccess或AliyunNISFullAccess权限。 | 诊断 |
| 403 | Forbidden.AnalysisTaskIds | The user does not have the corresponding instance (%s) permission. | 该用户无对应实例(%s)权限. | 诊断 |
| 403 | Forbidden.CreateServiceLinkedRole | The user does not have permission: %s. | 当前用户无权限:%s。 | 诊断 |
| 403 | Forbidden.CreateTask | The user has a running task and creation is prohibited. | 用户存在运行中的任务,禁止创建。 | 诊断 |
| 403 | Forbidden.DataSourceId | The user does not have permission to operate this resource (%s). | 该用户没有操作该资源(%s)权限。 | 诊断 |
| 403 | Forbidden.DiagnosisReportIds | This user does not have permission to operate this resource (%s). | 该用户无可操作该资源(%s)权限. | 诊断 |
| 403 | Forbidden.GenerateAccessToken | The user does not have permission to access the (GenerateAccessToken) service. | 用户无权限访问(GenerateAccessToken)服务。 | 诊断 |
| 403 | Forbidden.GetPrometheusUserSetting | The user does not have permission to access the (cms:GetPrometheusUserSetting) service. | 用户无权限访问(cms:GetPrometheusUserSetting)服务。 | 诊断 |
| 403 | Forbidden.InsightId | The user does not have permission on the instance parameter (%s). | 该用户无该实例参数(%s)权限. | 诊断 |
| 403 | Forbidden.InspectionReportId | This user does not have permission to this report parameter (%s). | 该用户无该报告参数(%s)权限。 | 诊断 |
| 403 | Forbidden.MappingId | The user does not have permission to operate this resource (%s). | 该用户没有操作该资源(%s)权限。 | 诊断 |
| 403 | Forbidden.NetworkPath | The current user has not activated NIS and is not authorized to use the path analysis interface. | 当前用户未开通NIS,无权限使用路径分析接口。 | 诊断 |
| 403 | Forbidden.NetworkPathId | The user does not have permission on the instance parameter (%s). | 该用户没有该实例资源(%s)权限. | 诊断 |
| 403 | Forbidden.NetworkReachableAnalysisId | The user does not have permission on the instance parameter (%s). | 该用户没有该资源(%s)权限. | 诊断 |
| 400 | Forbidden.NoPermission | The authentication result is successful but the verification fails. | 鉴权结果成功但验证未通过。 | 诊断 |
| 403 | Forbidden.ReportId | The user does not have permission on the instance parameter (%s). | 该用户没有该实例资源(%s)权限. | 诊断 |
| 403 | Forbidden.ResourceId | The user does not have permission on the instance parameter (%s). | 该用户没有该实例资源(%s)权限. | 诊断 |
| 403 | Forbidden.ServiceNotActivated | The NAPal service has not been activated for this account (%s). | 该账号(%s)尚未开通NAPal服务。 | 诊断 |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | 无权操作此标签类型。 | 诊断 |
| 403 | Forbidden.TaskId | The user does not have permission on the instance parameter (%s). | 该用户没有改实例参数(%s)的权限. | 诊断 |
| 403 | Forbidden.TrafficAnalyzerId | The user does not have permission to operate this resource (%s). | 该用户没有操作该资源(%s)权限。 | 诊断 |
| 403 | ForbiddenException.UidNoPermission | This user (%s) does not have AliyunServiceRoleForNis privileges. | 该用户(%s)无AliyunServiceRoleForNis权限。 | 诊断 |
| 400 | IllegalParam.DescriptionLanguage | Unsupported DescriptionLanguage(%s) type. | 暂不支持的DescriptionLanguage(%s)类型。 | 诊断 |
| 400 | IllegalParam | The specified parameter thisRegion(%s) is illegal. | 该thisRegion(%s)字段是不合法的 | 诊断 |
| 400 | IllegalParam.AccountIds | The specified parameter accountId (%s) is invalid. | 指定的AccountId (%s)不在用户可选范围内。 | 诊断 |
| 400 | IllegalParam.AccountIds | The specified param of accountId (%s) is not in the optional range. | 指定的AccountId (%s)不在用户可选范围内。 | 诊断 |
| 400 | IllegalParam.Action | The current field (%s) parameter is illegal. | 当前字段(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.ActionParam | Illegal parameter ActionParam. | 非法参数ActionParam。 | 诊断 |
| 400 | IllegalParam.AddIpsOrDeleteIps | The specified AddIpsOrDeleteIps parameter is illegal. | 指定的AddIpsOrDeleteIps参数不合法。 | 诊断 |
| 400 | IllegalParam.AggregationInterval | The traffic analyzer sampling interval cannot be less than the flow log sampling interval. | 该流量分析器采样间隔不可小于流日志采样间隔。 | 诊断 |
| 400 | IllegalParam.AggregationInterval | The parameter (%s) cannot be large or small. | 该参数(%s)不可大与最小值。 | 诊断 |
| 400 | IllegalParam.AiAssistantNotUsed | Please confirm whether the assistant has a subscription package or refueling package available. If not, renew or purchase a refueling package first. | 请确认助手是否有可用的订阅包或加油包,若不可用则先进行续费或购买加油包。 | 诊断 |
| 400 | IllegalParam.AliUid | The current uid (%s) has no inspection tasks. | 当前用户 (%s) 没有巡检任务。 | 诊断 |
| 400 | IllegalParam.AnalysisLogs | The specified AnalysisLogs(%s) parameter cannot be empty. | 指定的AnalysisLogs(%s)参数不能为空。 | 诊断 |
| 400 | IllegalParam.AnalysisTaskIds | The specified AnalysisTaskIds parameter is illegal. | 指定的AnalysisTaskIds参数不合法。 | 诊断 |
| 400 | IllegalParam.AttachmentType | Unsupported AttachmentType(%s) type. | 暂不支持的AttachmentType(%s)类型。 | 诊断 |
| 400 | IllegalParam.AzToAzValue | Unsupported value for Az pair (%s). | 暂不支持的Az对(%s)值。 | 诊断 |
| 400 | IllegalParam.BeginTime | The specified BeginTime(%s) is illegal. | 指定的BeginTime(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.BeginTime | The specified BeginTime parameter is illegal. | 指定的BeginTime参数不合法。 | 诊断 |
| 400 | IllegalParam.BeginTime | The specified begin time (%s) is invalid. | 指定的开始时间(%s)不合法。 | 诊断 |
| 400 | IllegalParam.BeginTimeAndEndTime | The param of BeginTimeAndEndTime is illegal. | 开始结束时间错误。可能是因为开始时间大于或等于结束时间,或范围超出最大限制 | 诊断 |
| 400 | IllegalParam.BeginTimeAndEndTime | It only supports querying data for up to 24 hours: %s. | 最大支持查询24小时数据。 | 诊断 |
| 400 | IllegalParam.BeginTimeAndEndTime | It only supports querying data for up to 7 days: %s. | 最大仅支持查询7天的数据:%s。 | 诊断 |
| 400 | IllegalParam.BeginTimeAndEndTime1H | It only supports querying data for up to 1 hour: %s. | 最长支持查询1小时数据: %s。 | 诊断 |
| 400 | IllegalParam.BeginTimeAndEndTime5M | It only supports querying data for up to 5 minute when TupleType is 5 and the CloudIp and OtherIp are both empty: %s. | 当TupleType=5且CloudIp、OtherIp都是空时,只支持查询最长5分钟范围的数据。 | 诊断 |
| 400 | IllegalParam.BizId | The specified BizId(%s) is illegal. | 指定的BizId(%s)不合法。 | 诊断 |
| 400 | IllegalParam.BizType | The specified BizType(%s) is illegal. | 指定的BizType(%s)不合法。 | 诊断 |
| 400 | IllegalParam.CenId | The parameter CenId is not specified. | CenId参数未指定。 | 诊断 |
| 400 | IllegalParam.Change | The current Change check failed. | 当前Change校验失败. | 诊断 |
| 400 | IllegalParam.ChannelId | The specified ChannelId(%s) is illegal. | 指定的ChannelId(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.ChannelType | The specified ChannelType(%s) is illegal. | 指定的ChannelType(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.CloudIp | The specified CloudIp(%s) is invalid. | 指定的CloudIp(%s)不合法。 | 诊断 |
| 400 | IllegalParam.CloudPort | The specified CloudPort(%s) is invalid. | 指定的CloudPort(%s)不合法。 | 诊断 |
| 400 | IllegalParam.ConfigurationAbsent | The subscription configuration does not exist. | 订阅配置不存在. | 诊断 |
| 400 | IllegalParam.ContextId | The parameter (%s) cannot be empty. | 该参数(%s)不可为空。 | 诊断 |
| 402 | IllegalParam.CreditInsufficient | Credit has been exhausted in the current cycle. | 当前周期内Credit已耗尽。 | 诊断 |
| 400 | IllegalParam.CustomConfig | The specified CustomConfig(%s) is illegal. | 指定的CustomConfig(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.DataSourceId | The DataSourceId parameter cannot be empty. | 该DataSourceId参数不可为空。 | 诊断 |
| 400 | IllegalParam.DataSourceId | The parameter (%s) is illegal. | 该参数(%s)不合法. | 诊断 |
| 400 | IllegalParam.DataSourceIdOrNtaId | TrafficAnalyzerId and DataSourceId cannot be empty at the same time. | TrafficAnalyzerId和DataSourceId不可同时为空。 | 诊断 |
| 400 | IllegalParam.DataSourceOwnerId | The DataSourceOwnerId must be a valid user id. | 该DataSourceOwnerId必须为有效的用户id。 | 诊断 |
| 400 | IllegalParam.DataSourceRegionId | This operation is not supported in the region (%s). | 该地域(%s)不支持此操作. | 诊断 |
| 400 | IllegalParam.DataSourceStatus | The data source is being processed, please try again later. | 该数据源正在处理中,请稍后重试。 | 诊断 |
| 400 | IllegalParam.DataSourceType | The parameter (%s) is illegal. | 该参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Date | The specified Date(%s) is illegal. | 指定的Date(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.DayOfMonth | The specified DayOfMonth(%s) is illegal. | 指定的DayOfMonth(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.DaysOfWeek | The specified DaysOfWeek(%s) is illegal. | 指定的DaysOfWeek(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.DefaultEnabledError | First-time gift default activation failed. | 首次赠送缺省开通失败. | 诊断 |
| 400 | IllegalParam.DeliveryPlatformType | Unsupported DeliveryPlatformType(%s) type. | 暂不支持的DeliveryPlatformType(%s)类型。 | 诊断 |
| 400 | IllegalParam.DeliveryRegion | Unsupported DeliveryRegion(%s) value. | 暂不支持的DeliveryRegion(%s)值。 | 诊断 |
| 400 | IllegalParam.Description | The current field (%s) exceeds the limit length. | 当前字段(%s)超过限制长度。 | 诊断 |
| 400 | IllegalParam.DescriptionLanguage | Unsupported DescriptionLanguage(%s) type. | 暂不支持的DescriptionLanguage(%s)类型。 | 诊断 |
| 400 | IllegalParam.DestinationIp | The specified ip(%s) is illegal. | 指定的ip(%s)不合法。 | 诊断 |
| 400 | IllegalParam.DestinationIpAddress | The specified DestinationIpAddress(%s) is invalid. | 指定的DestinationIpAddress(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.DestinationPort | The specified DestinationPort(%s) is invalid. | 指定的DestinationPort(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.DestinationRegions | The param of DestinationRegions is illegal. | DestinationRegions 参数不合法。 | 诊断 |
| 400 | IllegalParam.DestinationSubnet | The request parameter destination network segment (%s) is invalid. | 该请求参数目标网段(%s)不合法。 | 诊断 |
| 400 | IllegalParam.DestinationZones | The param of DestinationZones is illegal. | 输入的目的可用区不合法,可能是与 RegionId 不匹配 | 诊断 |
| 400 | IllegalParam.DimensionName | Unsupported DimensionName(%s) type. | 暂不支持的DimensionName(%s)类型。 | 诊断 |
| 400 | IllegalParam.Dimensions | The specified Dimensions(%s) is illegal. | 指定的Dimensions(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.DestinationRegionId | The specified parameter Dimensions.DestinationRegionId(%s) is illegal. | 指定的Dimensions.DestinationRegionId(%s)参数非法。 | 诊断 |
| 400 | IllegalParam.Dimensions.DestinationRegionNo | The specified parameter Dimensions.DestinationRegionNo(%s) is illegal. | 指定的Dimensions.DestinationRegionNo(%s)参数非法。 | 诊断 |
| 400 | IllegalParam.Dimensions.DestinationZone | The specified parameter Dimensions.DestinationZone (%s) is illegal. | 指定的参数Dimensions.DestinationZone(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.Direction | The specified Dimensions.Direction(%s) is illegal. | 指定的Dimensions.Direction(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.InspectionTaskId | The specified argument Dimensions.InspectionTaskId(%s) is illegal. | 指定的参数Dimensions.InspectionTaskId(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.InstanceId | The specified Dimensions.InstanceId(%s) is illegal. | 指定的Dimensions.InstanceId(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.ResourceType | The specified Dimensions.ResourceType(%s) is illegal. | 指定的Dimensions.ResourceType(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.SourceZone | The specified parameter Dimensions.SourceZone(%s) is illegal. | 指定的参数Dimensions.SourceZone(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.TrafficScenario | The argument Dimensions.TrafficScenario(%s) is illegal. | 该参数Dimensions.TrafficScenario(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Dimensions.TupleDimension | The argument Dimensions.TupleDimension(%s) is illegal. | 该参数Dimensions.TupleDimension(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Direction | The specified direction (%s) is invalid. | 指定的Direction参数不合法,请修改。 | 诊断 |
| 400 | IllegalParam.DiskCategory | The specified disk category (%s) is invalid. | 指定的磁盘类型(%s)不合法。 | 诊断 |
| 400 | IllegalParam.EnableAndIntervalEmpty | The specified parameter LogAggregationInterval and EnableNISTrafficAnalyzer cannot be both empty. | 指定的参数LogAggregationInterval和EnableNISTrafficAnalyzer不能同时都为空。 | 诊断 |
| 400 | IllegalParam.EnableNISTrafficAnalyzer | The specified EnableNISTrafficAnalyzer(%s) argument is illegal. | 指定的EnableNISTrafficAnalyzer(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.EndTime | The specified EndTime(%s) is illegal. | 指定的EndTime(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.EndTime | The specified end time (%s) is invalid. | 指定的结束时间(%s)不合法。 | 诊断 |
| 400 | IllegalParam.EventCode | Unsupported EventCode(%s) type. | 暂不支持的EventCode(%s)类型。 | 诊断 |
| 400 | IllegalParam.EventType | The specified EventType(%s) is invalid. | 指定的EventType参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.ExtraInfo.NetworkInterfaceId | The specified ExtraInfo.NetworkInterfaceId parameter is illegal. | 指定的ExtraInfo.NetworkInterfaceId参数不合法。 | 诊断 |
| 400 | IllegalParam.FieldName | Unsupported FieldName(%s) type. | 暂不支持的FieldName(%s)类型。 | 诊断 |
| 400 | IllegalParam.Filter | The specified Filter parameter (%s) is illegal. | 指定的Filter参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Filter.Combine | The specified filter parameter(%s) is invalid. | 当前过滤参数不合法。 | 诊断 |
| 400 | IllegalParam.Filter.FlowAction | The parameter Filter.FlowAction(%s) is illegal. | 该参数Filter.FlowAction(%s)不合法. | 诊断 |
| 400 | IllegalParam.Filter.InstanceId | The specified InstanceId(%s) is illegal. | 指定的InstanceId(%s)参数非法。 | 诊断 |
| 400 | IllegalParam.Filter.QueryByRelationshipType | The specified filter parameter(%s) is invalid. | 指定过滤参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Filter.QueryByResourceType | The specified filter parameter(%s) is invalid. | 过滤参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.FilterLogic | The specified FilterLogic(%s) is illegal. | 指定的FilterLogic(%s)不合法。 | 诊断 |
| 400 | IllegalParam.FilterName | The specified FilterName(%s) is invalid. | 指定的 FilterName(%s) 无效。 | 诊断 |
| 400 | IllegalParam.FilterValue | Current parameter is illegal (%s). | 当前参数不合法(%s). | 诊断 |
| 400 | IllegalParam.FlowLogIntervalGreaterThanNta | The FlowLog sampling interval (%s) specified is greater than the minimum sampling interval of the traffic analyzer. | 指定的FlowLog的采样间隔(%s)大于流量分析器的最小采样间隔。 | 诊断 |
| 400 | IllegalParam.FlowLogNotSupport | The parameter MetricName(%s) is illegal. | 该参数MetricName(%s)不合法. | 诊断 |
| 400 | IllegalParam.FlowLogStatusNotInactive | FlowLog status is not Inactive. | flowLog状态不是Inactive | 诊断 |
| 400 | IllegalParam.GroupBy | The specified param of GroupBy (%s) is invalid. | 指定的分组字段(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Id | The parameter (%s) cannot be empty. | 该参数(%s)不可为空。 | 诊断 |
| 400 | IllegalParam.inOrOut | Valid values for the inOrOut parameter: in and out. | 参数inOrOut必须为i('in','out')之一。 | 诊断 |
| 400 | IllegalParam.InsightId | The specified InsightId(%s) is illegal. | 指定的InsightId参数不合法。 | 诊断 |
| 400 | IllegalParam.InsightIds | The specified InsightIds(%s) parameter is illegal. | 指定的InsightIds(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.InspectionProject | The specified argument InspectionProject(%s) is illegal. | 指定的参数InspectionProject不合法。 | 诊断 |
| 400 | IllegalParam.InspectionTaskId | The specified argument InspectionTaskId(%s) is illegal. | 指定参数InspectionTaskId(%s)不合法。 | 诊断 |
| 400 | IllegalParam.InspectionType | The specified inspectionType (%s) is not supported. | 参数inspectionType不合法 | 诊断 |
| 404 | IllegalParam.InstanceChargeType | The specified InstanceChargeType is invalid. | ?参数InstanceChargeType非法 | 诊断 |
| 400 | IllegalParam.InstanceIps | The specified InstanceIps (%s) is invliad. | 指定的InstanceIps(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.InstanceParams | The InstanceParams parameter is abnormal. | 该InstanceParams参数异常。 | 诊断 |
| 400 | IllegalParam.InternetIP | The specified IP address (%s) is not an internet IP address. | 指定的IP(%s)不是公网地址。即IP地址不能在10.0.0.0~10.255.255.255、172.16.0.0 ~172.31.255.255、192.168.0.0~192.168.255.255 这3个地址段内。 | 诊断 |
| 400 | IllegalParam.Interval | The specified Interval(%s) is illegal. | 指定的Interval(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.IntervalImmutable | The sample time of this parameter information (%s) cannot be modified. | 该参数信息(%s)的采样时间不允许修改。 | 诊断 |
| 400 | IllegalParam.IntervalMinutes | The specified IntervalMinutes(%s) is illegal. | 指定的IntervalMinutes(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.IntervalMinutesTooShort | The IntervalMinutes must be at least 10. | IntervalMinutes最小值为10。 | 诊断 |
| 400 | IllegalParam.IP | The specified IP address (%s) is invalid. | 指定的IP地址(%s)无效。 | 诊断 |
| 400 | IllegalParam.IpType | The specified IpType (%s) is invalid. | 指定的IpType参数不合法。 | 诊断 |
| 400 | IllegalParam.IpTypeAndBindType | It it not support the combination of IpType and BindType(%s). | 不支持当前IpType和BindType(%s)的参数组合。 | 诊断 |
| 400 | IllegalParam.Ipv4Prefix | The parameter Ipv4Prefix is invalid. | 参数Ipv4Prefix非法 | 诊断 |
| 400 | IllegalParam.Kaleidoscope | The user RFQ call kaleidoscope error. | 该用户询价调用万花筒错误。 | 诊断 |
| 400 | IllegalParam.Language | Unsupported Language(%s) language type. | 暂不支持的Language(%s)语言类型。 | 诊断 |
| 400 | IllegalParam.LineType | The specified LineType(%s) is invalid. | 指定的 LineType(%s) 无效。 | 诊断 |
| 400 | IllegalParam.LogAggregationInterval | The specified LogAggregationInterval(%s) argument is illegal. | 指定的LogAggregationInterval(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.LogId | The specified LogId(%s) parameter cannot be empty. | LogId不能为空 | 诊断 |
| 400 | IllegalParam.MappingExist | There's mapping resource exists, please remove first. | 存在映射资源,请先删除。 | 诊断 |
| 400 | IllegalParam.MappingId | The parameter (%) is illegal. | 该参数(%)不合法。 | 诊断 |
| 400 | IllegalParam.MaxResult | The specified param of MaxResult (%s) is invalid. | 指定的最大查询条数MaxResult(%s)超出查询限制。 | 诊断 |
| 400 | IllegalParam.MaxResults | The specified parameter MaxResults is illegal. | 指定的参数MaxResults不合法。 | 诊断 |
| 400 | IllegalParam.MaxTimeScope | The query time range exceeds the limit. You can query up to %s days of data. | 查询时间范围超出限制,最大支持查询%s天的数据。 | 诊断 |
| 400 | IllegalParam.MetricName | The specified MetricName(%s) is illegal. | 指定的MetricName(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.MetricType | Unsupported MetricType(%s) type. | 暂不支持的MetricType(%s)类型。 | 诊断 |
| 400 | IllegalParam.MetricType | The specified MetricType(%s) is illegal. | 指定的MetricType(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.MetricType | The specified metricType (%s) is not supported. | 指定的metricType参数不支持,目前只支持sp和fp。 | 诊断 |
| 400 | IllegalParam.Minute | The specified Minute(%s) is illegal. | 指定的Minute(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.MissingTimeRange | The (StartTime,EndTime) time range must be passed in together. | 该(StartTime,EndTime)时间范围必须一起传入。 | 诊断 |
| 400 | IllegalParam.MonitorScopeType | Unsupported MonitorScopeType(%s) type. | 暂不支持的MonitorScopeType(%s)类型。 | 诊断 |
| 400 | IllegalParam.Name | The specified Name(%s) is illegal. | 指定的Name参数不合法,可能是长度过长。 | 诊断 |
| 400 | IllegalParam.NameSpace | Unsupported NameSpace(%s) type. | 暂不支持的NameSpace(%s)类型。 | 诊断 |
| 400 | IllegalParam.NameSpaceMetricType | Unsupported NameSpaceMetricType(%s) type. | 暂不支持的NameSpaceMetricType(%s)类型。 | 诊断 |
| 400 | IllegalParam.NetworkPathId | The parameter (%s) cannot be empty. | 该参数(%s)不能为空. | 诊断 |
| 400 | IllegalParam.NetworkReachableAnalysisId | The parameter (%s) cannot be empty. | 该参数(%s)不能为空。 | 诊断 |
| 400 | IllegalParam.NextToken | Unsupported NextToken(%s) type. | 暂不支持的NextToken(%s)类型。 | 诊断 |
| 400 | IllegalParam.NextToken | The specified parameter NextToken is illegal. | 指定的参数NextToken不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | The specified NextToken(%s) is illegal. | 指定的参数NextToken不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | The specified argument NextToken(%s) is illegal. | 指定的参数NextToken(%s)不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | The specified nextToken(%s) is invalid. | 指定的NextToken(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.NisMetricFieldName | Unsupported NisMetricFieldName(%s) type. | 暂不支持的NisMetricFieldName(%s)类型。 | 诊断 |
| 400 | IllegalParam.NisMetricSubscriptionId | Unsupported NisMetricSubscriptionId(%s) value. | 暂不支持的NisMetricSubscriptionId(%s)值。 | 诊断 |
| 400 | IllegalParam.NotPublicIp | The specified (%s) is invalid. | 指定的参数 (%s) 不是公网IP。 | 诊断 |
| 400 | IllegalParam.NotSupportHaVpn | The specified VPN(%s), which is not currently supported for such instances. | 指定的VPN(%s)是HaVpn,此类实例目前尚不支持。 | 诊断 |
| 400 | IllegalParam.NotTr | The specified TR(%s), which is not currently supported for such instances. | 指定的转发路由器TR(%s)不是企业版,此类实例目前尚不支持。 | 诊断 |
| 400 | IllegalParam.NtaIdBindCbwpNeedOneTuple | The traffic analyzer cannot cancel the unary group when binding the shared bandwidth data source. | 流量分析器绑定共享带宽数据源时,不可取消一元组。 | 诊断 |
| 400 | IllegalParam.NtaIdBindTrNotOnlyOneTuple | When the traffic analyzer binds to the tr data source, you cannot configure only the one-tuple. | 流量分析器绑定tr数据源时,不可只配置一元组。 | 诊断 |
| 400 | IllegalParam.NtaIntervalLessThanFlowLog | The sampling interval of the specified traffic analyzer is less than the maximum sampling interval of the associated network log (%s). | 指定的流量分析器采样间隔小于已经关联的网络日志的最大采样间隔(%s)。 | 诊断 |
| 400 | IllegalParam.NtaNotOneTuple | The traffic analyzer does not have a unary configured and cannot bind to shared bandwidth. Please configure the tuple before binding. | 该流量分析器未配置一元组,不可绑定共享带宽。请配置一元组后在进行绑定。 | 诊断 |
| 400 | IllegalParam.NtaNotOneTuple | When binding a shared bandwidth, the traffic analyzer has at least one tuple for high-precision statistics and long-period statistics. | 绑定共享带宽时,流量分析器高精度统计和长周期统计至少有一个一元组。 | 诊断 |
| 400 | IllegalParam.NullSystemParam | The system parameter (%s) is not specified. This problem occurs mostly when called through the SDK. | 系统参数(%s)未指定。此问题多发生在通过SDK调用时。 | 诊断 |
| 400 | IllegalParam.ObjectId | The specified objectId (%s) is not supported. | 参数objectId不合法 | 诊断 |
| 400 | IllegalParam.ObjectType | The specified objectType (%s) is not supported. | 参数objectType不支持 | 诊断 |
| 400 | IllegalParam.Operator | The specified Operator(%s) is invalid. | 指定的 Operator(%s) 无效。 | 诊断 |
| 400 | IllegalParam.OppositeVpcId | The request parameter (%s) is illegal. | 该请求参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Order | Unsupported Order(%s) type. | 暂不支持的Order(%s)类型。 | 诊断 |
| 400 | IllegalParam.Order | Unsupported Order(%s) sort type. | 暂不支持的Order(%s)排序类型。 | 诊断 |
| 400 | IllegalParam.OrderBy | The specified param of orderBy (%s) is invalid. | 指定的排序字段(%s)不合法。 | 诊断 |
| 400 | IllegalParam.OtherIp | The specified OtherIp(%s) is invalid. | 指定的OtherIp(%s)不合法。 | 诊断 |
| 400 | IllegalParam.OtherPort | The specified OtherPort(%s) is invalid. | 指定的OtherPort(%s)不合法。 | 诊断 |
| 400 | IllegalParam.ownerId | The param of ownerId is illegal. | ownerId的参数不合法。 | 诊断 |
| 400 | IllegalParam.Parameter | Parameter error. | 参数错误。 | 诊断 |
| 400 | IllegalParam.Parameter | Illegal parameters currently exist. | 当前存在不合法参数。 | 诊断 |
| 400 | IllegalParam.Period | The specified period (%s) is not supported. | 参数period不合法 | 诊断 |
| 404 | IllegalParam.Period | The specified Period is invalid. | 参数Period非法 | 诊断 |
| 400 | IllegalParam.Product | The specified Product(%s) is illegal. | 指定的Product(%s) 不合法。 | 诊断 |
| 404 | IllegalParam.ProductId | The specified ProductId is invalid. | 参数ProductId非法 | 诊断 |
| 400 | IllegalParam.Protocol | The specified Protocol(%s) is invalid. | 指定的Protocol(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Provider | The specified parameter Provider(s%) is invalid. | 指定的参数Provider(s%)不合法。 | 诊断 |
| 400 | IllegalParam.QueryTimeRange | The specified query time range is too long. You can query data less than %s. | 指定的查询时间范围过长,支持查询%s以内的数据。 | 诊断 |
| 400 | IllegalParam.QuotaOutOfGauge | The gift amount exceeds the limit. | 赠送额度超出限制。 | 诊断 |
| 400 | IllegalParam.RawPayload | This parameter (%s) has exceeded the maximum length, please re-enter. | 该参数(%s)已超过最大长度,请重新输入。 | 诊断 |
| 400 | IllegalParam.Reachable | The specified reachable (%s) is invalid. It must be one of the following: true, false, or null. | 指定的Reachable变量值(%s)不合法,其枚举为:true/false/null。 | 诊断 |
| 400 | IllegalParam.RegionId | The specified parameter RegionId(%s) is illegal. | RegionId参数不合法 | 诊断 |
| 400 | IllegalParam.regionId | The specified RegionID (%s) is invalid. | The specified RegionID (%s) is invalid. | 诊断 |
| 400 | IllegalParam.RegionId | The specified RegionId parameter is illegal. | 指定的RegionId参数不合法。 | 诊断 |
| 400 | IllegalParam.RegionId | The specified region ID (%s) is invalid. | 指定的地域(%s)不合法。 | 诊断 |
| 400 | IllegalParam.RegionIdAndIpMap | The specified RegionIdAndIpMap(%s) is invalid. | 指定的RegionIdAndIpMap(%s)参数不合法,RegionIdAndIpMap需要是个JSON格式字符串,其中key为合法Region,value为逗号分隔的IP。 | 诊断 |
| 400 | IllegalParam.RegionIdAndIpMap.Ips | The specified (%s) in RegionIdAndIpMap is invalid, which should be ip address separated by comma. | 参数RegionIdAndIpMap中指定的(%s)不合法,应该是逗号分隔的IP。 | 诊断 |
| 400 | IllegalParam.RegionIdAndIpMap.RegionId | The specified (%s) in RegionIdAndIpMap is an invalid region. | 参数RegionIdAndIpMap里指定的(%s)不是一个合法的Region。 | 诊断 |
| 400 | IllegalParam.RegionIdNotSupported | The specified parameter RegionId(%s) is not supported. | 指定的参数RegionId(%s)不支持。 | 诊断 |
| 400 | IllegalParam.RegionIds | The specified RegionIds (%s) is invalid. | 指定的RegionIds参数不合法。 | 诊断 |
| 400 | IllegalParam.RegionNo | The specified parameter RegionNo(%s) is illegal. | 指定的参数RegionNo(%s)不合法。 | 诊断 |
| 400 | IllegalParam.RegionToRegionValue | Unsupported Region pair (%s) value. | 暂不支持的Region对(%s)值。 | 诊断 |
| 400 | IllegalParam.RelatedFieldName | The specified RelatedFieldName(%s) is invalid. | 暂不支持的 RelatedFieldName(%s) 类型。 | 诊断 |
| 400 | IllegalParam.RelatedFieldsKey | Unsupported RelatedFieldsKey(%s) type. | 暂不支持的RelatedFieldsKey(%s)类型。 | 诊断 |
| 400 | IllegalParam.RelatedFieldValue | The specified RelatedFieldValue(%s) is invalid. | 暂不支持的 RelatedFieldValue(%s) 类型。 | 诊断 |
| 400 | IllegalParam.RelationshipType | The specified param of RelationshipType (%s) is invalid. | 指定的RelationshipType(%s)不合法。 | 诊断 |
| 400 | IllegalParam.ReportId | The specified reportId (%s) may be not exist. | 参数reportId不存在 | 诊断 |
| 400 | IllegalParam.ResourceId | The specified resourceId (%s) may be not exist. | 指定的实例(%s)可能不存在,请检查是否拼写错误。 | 诊断 |
| 400 | IllegalParam.ResourcePoolName | The parameter ResourcePoolName is invalid. | 参数ResourcePoolName非法 | 诊断 |
| 400 | IllegalParam.ResourceSelector.RegionId | The param of ResourceSelector.ResourceId is illegal. | 参数非法 ResourceId | 诊断 |
| 400 | IllegalParam.ResourceSelector.ResourceId | The parameter ResourceId is invalid. | 参数ResourceId异常 | 诊断 |
| 400 | IllegalParam.ResourceSelector.ResourceType | The parameter is illegal. | 参数非法 ResourceType | 诊断 |
| 400 | IllegalParam.ResourceType | The specified parameter ResourceType is illegal. | 指定的参数ResourceType不合法。 | 诊断 |
| 400 | IllegalParam.ResourceType | The specified ResourceType(%s) is illegal. | 指定的参数ResourceType不合法。 | 诊断 |
| 400 | IllegalParam.ResourceType | The specified argument ResourceType(%s) is illegal. | 指定的参数ResourceType(%s)不合法。 | 诊断 |
| 400 | IllegalParam.ResourceType | The specified resourceType (%s) is not supported. | 指定的资源类型不支持。 | 诊断 |
| 400 | IllegalParam.ResourceType | The specified resourceType (%s) is invalid. | 指定的ResourceType变量值(%s)不存在。 | 诊断 |
| 400 | IllegalParam.Retentions | The specified Retentions(%s) argument is illegal. | 指定的Retentions(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.RiskLevel | The specified argument RiskLevel(%s) is illegal. | 指定的参数RiskLevel(%s)不合法。 | 诊断 |
| 400 | IllegalParam.RiskType | The specified riskType (%s) is not supported. | 参数riskType不合法 | 诊断 |
| 400 | IllegalParam.RouteResult | The current routing result is invalid. | 当前路由结果不合法。 | 诊断 |
| 400 | IllegalParam.ScheduleType | The specified ScheduleType(%s) is illegal. | 指定的ScheduleType(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.SDK.EndpointResolvingError | the domain name called by the sdk is invalid. | sdk调用域名不合法。 | 诊断 |
| 400 | IllegalParam.Sequence | The current field (%s) is illegal. | 当前字段(%s)不合法. | 诊断 |
| 400 | IllegalParam.ServiceOffline | The service has been taken offline. | 该服务已下线。 | 诊断 |
| 400 | IllegalParam.SimulationResource | The current resource attributes (%s) do not match. | 当前资源属性(%s)不匹配。 | 诊断 |
| 400 | IllegalParam.SkillId | The SkillId must be an inspection or diagnose type. | SkillId必须是巡检或诊断类型。 | 诊断 |
| 400 | IllegalParam.SmartAlb | The specified Application Type Load Balancing ALB(%s) is a Smart Edition and is not currently supported for such instances. | 指定的应用型负载均衡ALB(%s)是智能版,此类实例目前尚不支持。 | 诊断 |
| 400 | IllegalParam.Sort | The specified Sort(%s) is invalid. | 排序字段必须为('desc','asc')其中之一 | 诊断 |
| 400 | IllegalParam.SortBy | The specified SortBy(%s) is illegal. | 指定的SortBy(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.SortOrder | The specified SortOrder(%s) is illegal. | 指定的SortOrder(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.SourceAndTargetInternetIp | Both source ID and target ID are IP addresses, but are not Internet IP addresses. Reachability Analyzer does not support the scenario. | 源与目的都是IP,但都不是阿里云公网IP,路径分析不支持这种场景。 | 诊断 |
| 400 | IllegalParam.SourceEqualTarget | The specified source and destination are identical, which is not supported for analysis. | 指定的源和目的相同,不支持分析。 | 诊断 |
| 400 | IllegalParam.SourceId | The specified SourceId(%s) may be not exist. | 指定的实例(%s)可能不存在,请检查是否拼写错误。 | 诊断 |
| 400 | IllegalParam.SourceIp | Please enter a valid source IP. | 请输入合法的源IP | 诊断 |
| 400 | IllegalParam.SourceIpAddress | The specified SourceIpAddress(%s) is invalid. | 指定的SourceIpAddress(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.SourceNotBound | Elastic public network IP(%s) is not bound to resources, and analysis is not supported for the time being. | 弹性公网IP(%s)未绑定资源,暂不支持分析。 | 诊断 |
| 400 | IllegalParam.SourcePort | The specified SourcePort(%s) is invalid. | 指定的SourcePort(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.SourcePort | The specified SourcePort(%s) value is invalid. The value must be within the range of (0,65536]. | SourcePort参数不合法,必须介于0到65536(含)之间。 | 诊断 |
| 400 | IllegalParam.SourceRegions | SourceRegions Can be wrong. | Region 参数有误。请确认输入的 Region 数量是否有误(> 1),或输入了错误的 RegionId | 诊断 |
| 400 | IllegalParam.SourceSubnet | The request source network segment parameter (%s) is invalid. | 该请求源网段参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.SourceType | The specified source type (%s) is invalid. | 指定的源类型(%s)无效。 | 诊断 |
| 400 | IllegalParam.SourceZones | The param of SourceZones is illegal. | 输入的源可用区不合法,可能是与 RegionId 不匹配 | 诊断 |
| 400 | IllegalParam.StartGreaterEnd | The StartTime parameter cannot be greater than EndTime. | 该StartTime参数不可大于EndTime。 | 诊断 |
| 400 | IllegalParam.Status | The specified Status(%s) is illegal. | 指定的Status(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.Status | Unsupported Status(%s) type. | 暂不支持的Status(%s)类型。 | 诊断 |
| 400 | IllegalParam.Status | The specified Status(%s) parameter is illegal. | 指定的Status(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Status | The specified parameter Status(%s) is invalid, can only be Active or InActive. | 指定的参数Status(%s)不合法,只能是Active或者InActive。 | 诊断 |
| 400 | IllegalParam.StatusNotInactive | The specified TrafficAnalyzerId resource state (%s) is not stopped. Please stop and try again. | 指定的TrafficAnalyzerId资源状态(%s)不是停止状态,请先停止后再重试。 | 诊断 |
| 400 | IllegalParam.StepMinutes | The specified StepMinutes parameter value is illegal, only %s minutes of data precision is supported. | 指定的StepMinutes参数值不合法,仅支持%s分钟的数据精度。 | 诊断 |
| 400 | IllegalParam.StepMinutes | The specified StepMinutes parameter value is illegal, only% s minutes of data precision is supported. | 指定的StepMinutes参数值不合法,仅支持%s分钟的数据精度。 | 诊断 |
| 400 | IllegalParam.StepMinutes | The specified argument StepMinutes(%s) is illegal. | 指定的参数StepMinutes(%s)不合法。 | 诊断 |
| 400 | IllegalParam.StepMinutes | The specified sampling interval (%s) is invalid. | 指定的采样间隔(%s)不合法。 | 诊断 |
| 400 | IllegalParam.StepMinutesAndTime | In the current query time range, data precision of only %s minutes is supported to ensure performance. | 当前查询时间范围下,为保证性能,仅支持%s分钟的数据精度。 | 诊断 |
| 400 | IllegalParam.StepMinutesAndTime | In the current query time range, data precision of only% s minutes is supported to ensure performance. | 当前查询时间范围下,为保证性能,仅支持%s分钟的数据精度。 | 诊断 |
| 400 | IllegalParam.Stream | The param of Stream is illegal. | Stream 参数不合法。 | 诊断 |
| 400 | IllegalParam.SubscriptionInquiryError | Subscription configuration query failed. | 订阅配置查询失败. | 诊断 |
| 400 | IllegalParam.SystemParam | A system parameter was not specified. This problem occurs mostly when called through the SDK. | 某个系统参数未指定。此问题多发生在通过SDK调用时。 | 诊断 |
| 400 | IllegalParam.TargetId | The specified TargetId(%s) may be not exist. | 指定的实例(%s)可能不存在,请检查是否拼写错误。 | 诊断 |
| 400 | IllegalParam.TargetIp | The specified target ip (%s) is invalid. | 指定的目的IP(%s)格式不正确。 | 诊断 |
| 400 | IllegalParam.TargetNotBound | Elastic public network IP(%s) is not bound to resources, and analysis is not supported for the time being. | 弹性公网IP(%s)未绑定资源,暂不支持分析。 | 诊断 |
| 400 | IllegalParam.TargetPort | The specified TargetPort(%s) value is invalid. The value must be within the range of (0,65536]. | TargetPort参数不合法,必须介于0到65536(含)之间。 | 诊断 |
| 400 | IllegalParam.TargetType | The specified target type (%s) is invalid. | 指定的目的类型(%s)无效。 | 诊断 |
| 400 | IllegalParam.TaskId | The specified TaskId(%s) parameter cannot be empty. | 指定的TaskId(%s)参数不能为空。 | 诊断 |
| 400 | IllegalParam.TaskId | The specified taskId (%s) may be not exist. | 参数taskId不存在 | 诊断 |
| 400 | IllegalParam.TaskMode | The specified TaskMode(%s) is illegal. | 指定的TaskMode(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.TaskParametersType | Unsupported TaskParameters.Type(%s) task parameter type. | 暂不支持的TaskParameters.Type(%s)任务参数类型。 | 诊断 |
| 400 | IllegalParam.TaskParams | The TaskParams parameter is abnormal. | 该TaskParams参数异常。 | 诊断 |
| 400 | IllegalParam.TaskStatus | The specified taskStatus (%s) is not supported. | 参数taskStatus不是支持的巡检任务状态 | 诊断 |
| 400 | IllegalParam.TaskType | Unsupported TaskType(%s) task type. | 暂不支持的TaskType(%s)任务类型。 | 诊断 |
| 400 | IllegalParam.TemplateConfig | The specified TemplateConfig(%s) is illegal. | 指定的TemplateConfig(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.TemplateConfigSkillCount | The TemplateConfig can only contain one skill. | TemplateConfig只能包含一个巡检技能。 | 诊断 |
| 400 | IllegalParam.ThisRegion | The specified parameter thisRegion(%s) is illegal. | ThisRegion不合法 | 诊断 |
| 400 | IllegalParam.Time | The specified Time(%s) is illegal. | 指定的Time(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.TimeRangeExceeded | The time range (%s) is not legal. | 该时间范围(%s)不合法。 | 诊断 |
| 400 | IllegalParam.Title | This parameter (%s) cannot be empty or longer than 256. | 该参数(%s)不可为空,或长度不可超过256. | 诊断 |
| 400 | IllegalParam.ToolCallParameter | The ToolCallParameter parameter is abnormal. | 该ToolCallParameter参数异常。 | 诊断 |
| 400 | IllegalParam.TopN | The TopN(%s) should not greater than 100. | 最大仅支持Top 100,实际传入为(%s)。 | 诊断 |
| 400 | IllegalParam.TrafficAnalyzerId | The specified TrafficAnalyzerId(%s) argument is illegal. | 指定的TrafficAnalyzerId(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.TrafficScenario | The argument TrafficScenario(%s) is illegal. | 该参数TrafficScenario(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterId | The request parameter (%s) is illegal. | 该请求参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.TrDataSourceVersion | The Forwarding Router (TR) flow log version is too low. Traffic analysis is not supported. | 转发路由器(TR)流日志版本过低,暂不支持开启流量分析。 | 诊断 |
| 400 | IllegalParam.TriggerTime | The specified triggerTime (%s) is not supported. | 参数triggerTime不合法 | 诊断 |
| 400 | IllegalParam.TriggerType | The specified TriggerType(%s) is illegal. | 指定的TriggerType(%s) 不合法。 | 诊断 |
| 400 | IllegalParam.TupleDimension | The specified TupleDimension(%s) argument is illegal. | 指定的TupleDimension(%s)参数不合法。 | 诊断 |
| 400 | IllegalParam.Type | Unsupported Type(%s) type. | 暂不支持的Type(%s)类型。 | 诊断 |
| 400 | IllegalParam.TypeAndIdMismatch | The specified instanceId (%s) and type do not match. | 指定的实例 (%s) 和实例类型不匹配。 | 诊断 |
| 400 | IllegalParam.UnsupportedRegion | The specified regionId(%s) is not supported. | 当前指定的地域不支持。 | 诊断 |
| 400 | IllegalParam.UnsupportedResourceType | The specified parameter ResourceType(%s) is invalid, with a resource type that is not currently supported. | 指定的参数ResourceType(%s)不合法,有当前不支持的资源类型。 | 诊断 |
| 400 | IllegalParam.UserNotActivated | User (%s) did not provision service. | 用户(%s)未开通服务。 | 诊断 |
| 400 | IllegalParam.UserOwesFees | User (%s) is overdue. | 用户(%s)已欠费. | 诊断 |
| 400 | IllegalParam.Vote | Vote(%s) user feedback type not supported. | 暂不支持的Vote(%s)用户反馈类型。 | 诊断 |
| 400 | IllegalParam.VpcId | The request parameter (%s) is illegal. | 该请求参数(%s)不合法。 | 诊断 |
| 400 | IllegalParam.VpnType | %s, and this type of instance is currently not supported. | %s,此类实例目前尚不支持。 | 诊断 |
| 400 | IllegalParam.ZoneId | The specified available zone (%s) is invalid. | 指定的可用区(%s)不合法。 | 诊断 |
| 400 | IllegalParameter.StorageConfiguration | The specified StorageConfiguration parameter is invalid. It is expected to be in JSON format with the specified project and logstore. | 指定的StorageConfiguration参数不合法,期望为json格式,其中指定了project和logstore。 | 诊断 |
| 400 | IllegalParamFormat.ActionParam | The param format of ActionParam (%s) is illegal. | 指定的ActionParam(%s)格式不正确。 | 诊断 |
| 400 | IllegalParamFormat.ItemCodes | The param format of %s is illegal. | 参数 %s 格式不对 | 诊断 |
| 400 | IllegalParamFormat.MaxBytes | The format of the specified parameter MaxBytes(%s) is not legal. | 指定的参数MaxBytes(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MaxPackages | The format of the specified parameter MaxPackages(%s) is not legal. | 指定的参数MaxPackages(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MaxPacketsLostBlackhole | The format of the specified parameter MaxPacketsLostBlackhole(%s) is not legal. | 指定的参数MaxPacketsLostBlackhole(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MaxPacketsLostNoRoute | The format of the specified parameter MaxPacketsLostNoRoute(%s) is not legal. | 指定的参数MaxPacketsLostNoRoute(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MaxPacketsLostTTLExpired | The format of the specified parameter MaxPacketsLostTTLExpired(%s) is not legal. | 指定的参数MaxPacketsLostTTLExpired(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MaxRoundTripTime | The format of the specified parameter MaxRoundTripTime(%s) is not legal. | 指定的参数MaxRoundTripTime(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MinBytes | The format of the specified parameter MinBytes(%s) is not legal. | 指定的参数MinBytes(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MinPackages | The format of the specified parameter MinPackages(%s) is not legal. | 指定的参数MinPackages(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MinPacketsLostBlackhole | The format of the specified parameter MinPacketsLostBlackhole(%s) is not legal. | 指定的参数MinPacketsLostBlackhole(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MinPacketsLostNoRoute | The format of the specified parameter MinPacketsLostNoRoute(%s) is not legal. | 指定的参数MinPacketsLostNoRoute(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MinPacketsLostTTLExpired | The format of the specified parameter MinPacketsLostTTLExpired(%s) is not legal. | 指定的参数MinPacketsLostTTLExpired(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamFormat.MinRoundTripTime | The format of the specified parameter MinRoundTripTime(%s) is not legal. | 指定的参数MinRoundTripTime(%s)格式不合法。 | 诊断 |
| 400 | IllegalParamLength.Comment | The Comment parameter exceeds the maximum length limit. | 该Comment参数超过最大长度限制。 | 诊断 |
| 400 | IllegalParamLength.Description | The Description parameter exceeds the maximum length (%s) limit. | 该Description参数超过最大长度(%s)限制。 | 诊断 |
| 400 | IllegalParamLength.JobName | The JobName exceeds the maximum length limit of 128. | JobName超过最大长度限制128。 | 诊断 |
| 400 | IllegalParamLength.NisMetricSubscriptionName | The NisMetricSubscriptionName parameter exceeds the maximum length (%s) limit. | 该NisMetricSubscriptionName参数超过最大长度(%s)限制。 | 诊断 |
| 400 | IllegalParamSize.DestinationRegions | The param size of DestinationRegions is %s, what is illegal. | DestinationRegions 入参数量(%s)不合法,请确认是否为空或超出数量限制 | 诊断 |
| 400 | IllegalParamSize.SourceRegions | The param size of SourceRegions is %s, what is illegal. | SourceRegions 入参数量(%s)不合法,请确认是否为空或超出数量限制 | 诊断 |
| 400 | IncorrectBusinessStatus.AliyunServiceRoleForNis | The operation is not allowed before creating ServiceLinkedRole:%s. | 在做此操作前,请先手动创建服务关联角色:%s。 | 诊断 |
| 400 | IncorrectStatus.EntityInstanceId | The current resource EntityInstanceId(%s) state (%s) is not available for this operation. | 当前资源EntityInstanceId(%s)状态(%s)不可执行此操作。 | 诊断 |
| 400 | IncorrectStatus.flowlog | This action is not allowed in the current flow log status. | 当前状态不允许此操作,请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.InspectionReportNotFinish | The specified task report InspectionReportId(%s) has not been completed. | 指定的任务报告InspectionReportId(%s)还没有完成。 | 诊断 |
| 400 | IncorrectStatus.InspectionTaskIsRunning | The specified task InspectionTaskId(%s) is in progress and cannot be closed. | 指定的任务InspectionTaskId(%s)正在执行中不能关闭。 | 诊断 |
| 400 | IncorrectStatus.InspectionTaskNotActive | The specified task InspectionTaskId(%s) is not active and cannot be executed. | 指定的任务InspectionTaskId(%s)不是开启状态不支持执行 | 诊断 |
| 400 | IncorrectStatus.InspectionTaskNotInactive | The specified task InspectionTaskId(%s) is not closed and cannot be opened. | 指定的任务InspectionTaskId(%s)不是关闭状态不支持开启 | 诊断 |
| 400 | IncorrectStatus.InspectionTaskNotInactive | The specified task InspectionTaskId(%s) is not closed and cannot be deleted. | 指定的任务InspectionTaskId(%s)不是关闭状态,不支持删除。 | 诊断 |
| 400 | IncorrectStatus.MetricSubscriptionId | The current resource MetricSubscriptionId(%s) state (%s) is not available for this operation. | 当前资源MetricSubscriptionId(%s)状态(%s)不可执行此操作。 | 诊断 |
| 400 | IncorrectStatus.NetworkPath | The last analysis status of %s is %s. Please try again later. | %s有分析任务未完成,请等待其完成后再试! | 诊断 |
| 400 | IncorrectStatus.NisMetricSubscriptionId | The current resource NisMetricSubscriptionId(%s) state (%s) is not available for this operation. | 当前资源NisMetricSubscriptionId(%s)状态(%s)不可执行此操作。 | 诊断 |
| 400 | IncorrectStatus.NtaInvalidOperationState | The traffic analyzer is not started. Please start before binding the data source. | 流量分析器未启动,请先启动后再绑定数据源。 | 诊断 |
| 400 | IncorrectStatus.NtaStatusInvalid | Traffic Analyzer %s is currently at %s and does not support binding data sources. | 流量分析器 %s 当前处于 %s , 暂不支持绑定数据源。 | 诊断 |
| 400 | IncorrectStatus.ResourceId | The %s has %s diagnosis task. Please try again later. | 实例%s有未完成的诊断任务,请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.ResourceIdJustFinish | Wait for at least one minute after the diagnosis (%s) of the resource ID is finished, and then try again. | 该实例诊断(%s)刚结束未满1分钟,请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TaskId | The current state of the specified TaskId(%s) does not support modification. Please try again later. | 指定的TaskId(%s)当前状态不支持修改,请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TrafficAnalyzerId | The user has been overdue downtime. | 该用户已欠费停机。 | 诊断 |
| 400 | IncorrectStatus.TrafficAnalyzerId | TrafficAnalyzerId (%s) is not in a valid status. | TrafficAnalyzerId(%s)非有效状态. | 诊断 |
| 400 | Insufficient.Balance | Your account available limit is less than 0, please recharge before trying to purchase. | 您的账户可用额度小于0,请先充值后再尝试购买。 | 诊断 |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | 指定的InstanceIds不合法。 | 诊断 |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | 指定的InstanceType不合法。 | 诊断 |
| 400 | InvalidParameter | Invalid parameter. | 无效参数。 | 诊断 |
| 400 | InvalidParameter.AliUid | The current AliUid cannot be empty. | 当前AliUid不可为空。 | 诊断 |
| 400 | InvalidParameter.ResourceType | The ResourceType parameter (%s) is illegal. | 该参数(%s)不合法。 | 诊断 |
| 400 | InvalidParameter.ScopeSelectorSnapshotId | The specified snapshotId mode is empty. | 指定的snapshotId模式为空。 | 诊断 |
| 400 | InvalidParameter.TagKey | The Tag.N.Key parameter is invalid. | Tag的Key参数无效 | 诊断 |
| 400 | InvalidParameter.TagValue | The Tag.N.Value parameter is invalid. | Tag的Value参数无效。 | 诊断 |
| 400 | InvalidParameter.TrAttachment | Can not find related resources from input tr-attachment id. | 无法通过您输入的跨地域连接实例找到关联资源 | 诊断 |
| 400 | InvalidResourceType | The current ResourceType parameters are invalid. Please confirm again. | 当前ResourceType参数不合法,请重新确认。 | 诊断 |
| 400 | InvalidResourceType.NotFound | The resource type is not found | 指定的ResourceType不合法。 | 诊断 |
| 400 | InvalidRoleIdentity | The role identity is invalid. | 该角色标识无效。 | 诊断 |
| 400 | InvalidTagKey | The tag keys are not valid. | 指定的TagKey不合法。 | 诊断 |
| 400 | InvalidTagValue | The tag values are not valid. | 指定的TagValue不合法。 | 诊断 |
| 404 | ItemCode.NotFound | The specified ItemCode is not found. | 参数ItemCode不存在 | 诊断 |
| 404 | ItemCode.NotFound | The specified itemCode of %s is not found. | 参数 %s 不存在 | 诊断 |
| 400 | Mismatch.BeginTime | Missing parameter BeginTime | 缺失参数BeginTime | 诊断 |
| 400 | Mismatch.BeginTimeAndEndTime | The specified begin time must be earlier than the end time. | 指定的开始时间在结束时间之后。 | 诊断 |
| 400 | Mismatch.SourceIdAndTargetId | Reachability Analyzer does not support the scenario in which source and target Internet IP addresses and ECS instance ID (%s and %s) are bound. | 路径分析不支持源与目的的公网IP和ECS实例ID(%s和%s)具有绑定关系。 | 诊断 |
| 400 | MismatchParameter.TrAttachmentAndRegion | The tr attachment id can not match the regionId. | 输入的跨域连接实例与 regionId 不匹配。 | 诊断 |
| 400 | MissingParam.Text | The Text parameter is not nullable. | 该Text参数不可为空。 | 诊断 |
| 400 | MissingParam.Type | The Type parameter cannot be null or empty. | 该Type参数不可为空。 | 诊断 |
| 400 | MissingParam.Value | The Value parameter is not nullable. | 该Value参数不可为空。 | 诊断 |
| 400 | MissingParam | The parameter %s is empty. | 参数%s为空。 | 诊断 |
| 400 | MissingParam.AgentId | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.AgentTaskBindingId | The AgentTaskBindingId parameter cannot be empty. | 该AgentTaskBindingId参数不可为空。 | 诊断 |
| 400 | MissingParam.AlertSource | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.AliUid | The current user cannot be empty. | 当前用户不可为空。 | 诊断 |
| 400 | MissingParam.AnalysisLogs | The specified AnalysisLogs(%s) parameter cannot be empty. | AnalysisLogs不能为空 | 诊断 |
| 400 | MissingParam.AnalysisSettings | The AnalysisSettings(%s) parameter cannot be empty. | 该AnalysisSettings(%s)参数不能为空。 | 诊断 |
| 400 | MissingParam.BeginTime | The parameter BeginTime(%s) cannot be empty. | 该参数BeginTime(%s)不能为空。 | 诊断 |
| 400 | MissingParam.CbwpId | The CbwpId filtered during the query cannot be empty. | 查询时过滤的CbwpId不可为空。 | 诊断 |
| 400 | MissingParam.ChannelId | The ChannelId parameter cannot be empty. | 该ChannelId参数不可为空。 | 诊断 |
| 400 | MissingParam.Channels | The Channels parameter cannot be empty. | 该Channels参数不可为空。 | 诊断 |
| 400 | MissingParam.ChannelType | The ChannelType parameter cannot be empty. | 该ChannelType参数不可为空。 | 诊断 |
| 400 | MissingParam.Config | The Config parameter cannot be null or empty. | 该Config参数不可为空。 | 诊断 |
| 400 | MissingParam.ContextId | The ContextId parameter cannot be empty. | 该ContextId参数不可为空。 | 诊断 |
| 400 | MissingParam.country | country cannot be empty. | country不可为空. | 诊断 |
| 400 | MissingParam.CurrentScopeSelectorSnapshotId | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.CustomConfig | The CustomConfig parameter cannot be empty. | 该CustomConfig参数不可为空。 | 诊断 |
| 400 | MissingParam.DataSourceId | The flowlog has been bound to the traffic analyzer and cannot be bound repeatedly. | 该flowlog已绑定流量分析器,不可重复绑定。 | 诊断 |
| 400 | MissingParam.DataSourceId | This parameter (%s) has been bound to the corresponding traffic analyzer and cannot be rebound. | 该参数(%s)已绑定对应的流量分析器,不可重复绑定. | 诊断 |
| 400 | MissingParam.DataSourceRegionId | The DataSourceRegionId parameter cannot be empty. | 该DataSourceRegionId参数不可为空. | 诊断 |
| 400 | MissingParam.DataSourceRegionId | DataSourceRegionId parameter cannot be empty. | DataSourceRegionId参数不可为空. | 诊断 |
| 400 | MissingParam.Date | The Date parameter cannot be empty. | 该Date参数不可为空。 | 诊断 |
| 400 | MissingParam.DayOfMonth | The DayOfMonth parameter cannot be empty. | 该DayOfMonth参数不可为空。 | 诊断 |
| 400 | MissingParam.DaysOfWeek | The DaysOfWeek parameter cannot be empty. | 该DaysOfWeek参数不可为空。 | 诊断 |
| 400 | MissingParam.DeliveryPlatform | The DeliveryPlatform parameter cannot be empty. | 该DeliveryPlatform参数不可为空。 | 诊断 |
| 400 | MissingParam.DeliveryRegion | The DeliveryRegion parameter cannot be empty. | 该DeliveryRegion参数不可为空。 | 诊断 |
| 400 | MissingParam.DimensionName | The DimensionName parameter cannot be empty. | 该DimensionName参数不可为空。 | 诊断 |
| 400 | MissingParam.Dimensions.Direction | The parameter Dimensions.Direction(%s) cannot be empty. | 该参数Dimensions.Direction(%s)不能为空. | 诊断 |
| 400 | MissingParam.Dimensions.RegionId | The parameter Dimensions.RegionId(%s) cannot be empty. | 该参数Dimensions.RegionId(%s)不能为空. | 诊断 |
| 400 | MissingParam.Dimensions.TrafficAnalyzerId | The parameter Dimensions.TrafficAnalyzerId(%) cannot be empty. | 该参数Dimensions.TrafficAnalyzerId(%)不能为空. | 诊断 |
| 400 | MissingParam.Dimensions.TrafficScenario | The Dimensions.TrafficScenario(%s) parameter cannot be empty. | 该Dimensions.TrafficScenario(%s)参数不能为空. | 诊断 |
| 400 | MissingParam.Dimensions.TupleDimension | The parameter Dimensions.TupleDimension(%s) cannot be empty. | 该参数Dimensions.TupleDimension(%s)不可为空. | 诊断 |
| 400 | MissingParam.DimensionValue | The DimensionValue parameter cannot be empty. | 该DimensionValue参数不可为空。 | 诊断 |
| 400 | MissingParam.EnableAndIntervalEmpty | The specified parameter LogAggregationInterval and EnableNISTrafficAnalyzer cannot be both empty. | 指定的参数LogAggregationInterval和EnableNISTrafficAnalyzer不能都为空。 | 诊断 |
| 400 | MissingParam.Enabled | The Enabled parameter cannot be empty. | 该Enabled参数不可为空。 | 诊断 |
| 400 | MissingParam.EndTime | The EndTime parameter cannot be empty. | 该EndTime参数不可为空。 | 诊断 |
| 400 | MissingParam.EndTime | The parameter EndTime(%s) cannot be empty. | 该参数EndTime(%s)不可为空. | 诊断 |
| 400 | MissingParam.EventId | The EventId parameter cannot be empty. | 该EventId参数不可为空。 | 诊断 |
| 400 | MissingParam.ExecutionId | The ExecutionId parameter cannot be empty. | 该ExecutionId参数不可为空。 | 诊断 |
| 400 | MissingParam.FieldName | The FieldName parameter cannot be empty. | 该 FieldName 参数不可为空。 | 诊断 |
| 400 | MissingParam.Filter | The Filter parameter is not nullable. | 该Filter参数不可为空。 | 诊断 |
| 400 | MissingParam.FilterName | The FilterName parameter cannot be empty. | 该 FilterName 参数不可为空。 | 诊断 |
| 400 | MissingParam.FilterValue | The FilterValue parameter cannot be empty. | 该 FilterValue 参数不可为空。 | 诊断 |
| 400 | MissingParam.FromAz | The FromAz parameter is not nullable. | 该FromAz参数不可为空。 | 诊断 |
| 400 | MissingParam.FromRegion | The FromRegion parameter cannot be empty. | 该FromRegion参数不可为空。 | 诊断 |
| 400 | MissingParam.GroupBy | The GroupBy parameter cannot be empty. | 该GroupBy参数不可为空。 | 诊断 |
| 404 | MissingParam.IdleCountModelList | You must specify IdleCountModelList. | 缺少必填参数IdleCountModelList | 诊断 |
| 400 | MissingParam.InspectionTaskId | The parameter (%s) cannot be empty. | 该参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.InspectionTaskId | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.InstanceParams | The InstanceParams parameter cannot be empty. | 该InstanceParams参数不可为空。 | 诊断 |
| 400 | MissingParam.Interval | The specified Interval(%s) parameter cannot be empty. | Interval不能为空 | 诊断 |
| 400 | MissingParam.IntervalMinutes | The IntervalMinutes parameter cannot be empty. | 该IntervalMinutes参数不可为空。 | 诊断 |
| 400 | MissingParam.JobId | The JobId parameter cannot be empty. | 该JobId参数不可为空。 | 诊断 |
| 400 | MissingParam.JobName | The JobName parameter cannot be empty. | 该JobName参数不可为空。 | 诊断 |
| 400 | MissingParam.ManifestActions | The current field (%s) cannot be empty. | 当前字段(%s)不可为空。 | 诊断 |
| 400 | MissingParam.MappingId | The MappingId parameter cannot be empty. | 该MappingId参数不可为空. | 诊断 |
| 400 | MissingParam.MetricSubscriptionId | The MetricSubscriptionId parameter cannot be empty. | 该MetricSubscriptionId参数不可为空。 | 诊断 |
| 400 | MissingParam.MetricSubscriptionName | The MetricSubscriptionName parameter cannot be empty. | 该MetricSubscriptionName参数不可为空。 | 诊断 |
| 400 | MissingParam.MetricType | The MetricType parameter cannot be empty. | 该MetricType参数不可为空。 | 诊断 |
| 400 | MissingParam.MetricType | The param of MetricType is missing. | 缺少MetricType参数。 | 诊断 |
| 400 | MissingParam.Minute | The Minute parameter cannot be empty. | 该Minute参数不可为空。 | 诊断 |
| 400 | MissingParam.MonitorScope | The MonitorScope parameter cannot be empty. | 该MonitorScope参数不可为空。 | 诊断 |
| 400 | MissingParam.Name | The current parameter (%s) cannot be null or empty. | 当前参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.NameSpace | The NameSpace parameter cannot be empty. | 该NameSpace参数不可为空。 | 诊断 |
| 400 | MissingParam.NisMetricFieldName | The NisMetricFieldName parameter cannot be empty. | 该NisMetricFieldName参数不可为空。 | 诊断 |
| 400 | MissingParam.NisMetricSubscriptionId | The NisMetricSubscriptionId parameter cannot be empty. | 该NisMetricSubscriptionId参数不可为空。 | 诊断 |
| 400 | MissingParam.NisMetricSubscriptionName | The NisMetricSubscriptionName parameter cannot be empty. | 该NisMetricSubscriptionName参数不可为空。 | 诊断 |
| 400 | MissingParam.NotificationConfig | The NotificationConfig parameter cannot be empty. | 该NotificationConfig参数不可为空。 | 诊断 |
| 400 | MissingParam.ObjectSetRef | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 404 | MissingParam.Period | You must specify Period. | 缺少必填参数Period | 诊断 |
| 400 | MissingParam.PlanSnapshotId | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 404 | MissingParam.ProductId | You must specify ProductId. | 缺少必填参数ProductId | 诊断 |
| 400 | MissingParam.RawPayload | The parameter (%s) is not nullable. | 该参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.RegionId | The param of regionId is missing. | 请输入 RegionId | 诊断 |
| 400 | MissingParam.regionId | The param of regionId is missing. | 请输入 RegionId | 诊断 |
| 400 | MissingParam.RelatedFieldName | The RelatedFieldName parameter cannot be empty. | 该 RelatedFieldName 参数不可为空。 | 诊断 |
| 400 | MissingParam.RelatedFieldValue | The RelatedFieldValue parameter cannot be empty. | 该 RelatedFieldValue 参数不可为空。 | 诊断 |
| 400 | MissingParam.ReportId | The current field (%s) cannot be empty. | 当前字段(%s)不可为空。 | 诊断 |
| 400 | MissingParam.Retentions | The Retentions(%s) parameter cannot be empty. | 该Retentions(%s)参数不能为空. | 诊断 |
| 400 | MissingParam.RunId | The RunId parameter cannot be empty. | 该RunId参数不可为空。 | 诊断 |
| 400 | MissingParam.Schedule | The Schedule parameter cannot be empty. | 该 Schedule 参数不可为空。 | 诊断 |
| 400 | MissingParam.ScheduleType | The ScheduleType parameter cannot be empty. | 该ScheduleType参数不可为空。 | 诊断 |
| 400 | MissingParam.SessionId | The SessionId parameter cannot be empty. | 该SessionId参数不可为空。 | 诊断 |
| 400 | MissingParam.SkillId | The SkillId parameter cannot be empty. | 该SkillId参数不可为空。 | 诊断 |
| 400 | MissingParam.SourceRegion | The SourceRegion parameter cannot be empty. | 该SourceRegion参数不可为空。 | 诊断 |
| 400 | MissingParam.StartTime | The StartTime parameter cannot be empty. | 该StartTime参数不可为空。 | 诊断 |
| 400 | MissingParam.StepMinutes | StepMinutes parameter cannot be empty. | StepMinutes参数不能为空。 | 诊断 |
| 400 | MissingParam.TaskId | The TaskId parameter cannot be null or empty. | 该TaskId参数不可为空。 | 诊断 |
| 400 | MissingParam.TaskId | The current parameter (%s) cannot be null or empty. | 当前参数(%s)不可为空。 | 诊断 |
| 400 | MissingParam.TaskMode | The TaskMode parameter cannot be empty. | 该TaskMode参数不可为空。 | 诊断 |
| 400 | MissingParam.TaskParameters | The TaskParameters parameter cannot be empty. | 该TaskParameters参数不可为空。 | 诊断 |
| 400 | MissingParam.TaskSetting | The TaskSetting parameter cannot be empty. | 该 TaskSetting 参数不可为空。 | 诊断 |
| 400 | MissingParam.TaskType | The TaskType parameter cannot be empty. | 该TaskType参数不可为空。 | 诊断 |
| 400 | MissingParam.TemplateConfig | The TemplateConfig parameter cannot be empty. | 该TemplateConfig参数不可为空。 | 诊断 |
| 400 | MissingParam.Time | The Time parameter cannot be empty. | 该Time参数不可为空。 | 诊断 |
| 400 | MissingParam.ToAz | The ToAz parameter cannot be null or empty. | 该ToAz参数不可为空。 | 诊断 |
| 400 | MissingParam.ToolCallParameter | The ToolCallParameter parameter cannot be empty. | 该ToolCallParameter参数不可为空。 | 诊断 |
| 400 | MissingParam.ToRegion | The ToRegion parameter cannot be empty. | 该ToRegion参数不可为空。 | 诊断 |
| 400 | MissingParam.TrafficAnalyzerId | The TrafficAnalyzerId parameter cannot be empty. | 该TrafficAnalyzerId参数不可为空。 | 诊断 |
| 400 | MissingParam.TrafficPath | The specified TrafficPath parameter cannot be empty. | 指定TrafficPath参数不能为空。 | 诊断 |
| 400 | MissingParam.TrafficType | The specified TrafficType parameter cannot be empty. | 指定TrafficType参数不能为空。 | 诊断 |
| 400 | MissingParam.TransitRouterAttachmentId | TransitRouterAttachmentId required in the specified Filter and GroupBy parameters. | 指定的Filter和GroupBy参数中TransitRouterAttachmentId必传。 | 诊断 |
| 400 | MissingParam.TransitRouterId | When querying cross-region network connections, you need to specify the forwarding router ID. | 查询跨地域网络连接时,需要指定转发路由器ID。 | 诊断 |
| 400 | MissingParam.TupleDimension | The specified TupleDimension parameter cannot be empty. | 指定TupleDimension参数不能为空。 | 诊断 |
| 400 | MissingParam.Type | The Type parameter cannot be null or empty. | 该Type参数不可为空。 | 诊断 |
| 400 | MissingParam.UserAuthId | The UserAuthId parameter cannot be empty. | 该UserAuthId参数不可为空。 | 诊断 |
| 400 | MissingParam.Value | The Value parameter is not nullable. | 该Value参数不可为空。 | 诊断 |
| 400 | MissingParam.Vote | The Vote parameter cannot be empty. | 该Vote参数不可为空。 | 诊断 |
| 400 | MissingParameter.ResourceIdsOrTags | ResourceId and Tag cannot be empty at the same time. | ResourceId和Tag不能同时为空。 | 诊断 |
| 400 | MissingParameter.TagKey | You must specify Tag.N.Key. | 必须指定Tag的Key。 | 诊断 |
| 400 | MissingParameter.TagValue | You must specify Tag.N.Value. | 必须指定Tag的Value。 | 诊断 |
| 400 | NextToken.PAGE_SERVICE_ERROR | Token is illegal, paging service error. | Token不合法,分页服务出错. | 诊断 |
| 400 | NidUnknownError | The NID service is not available. | NID服务不可用。 | 诊断 |
| 403 | NoPermission.Account | The accountId is not a member of the user's account. | 跨账号不是用户的成员账号 | 诊断 |
| 400 | NoPermission.AliyunServiceRoleForNis | You did not add a service role. Role name: AliyunServiceRoleForNis. Service name: nis.aliyuncs.com. Ensure that the user has added the role permissions. | 您未添加服务角色。角色名称:AliyunServiceRoleForNis。服务名称:nis.aliyuncs.com。请确保用户已添加了该角色权限。 | 诊断 |
| 403 | NoPermission.Uid | The uid is not DA or MA. | 用户不是管理员或者委派管理员 | 诊断 |
| 400 | NotSupported.Instance | %s, and this type of instance is currently not supported. | %s,此类实例目前尚不支持。 | 诊断 |
| 400 | NumberExceed.Tags | The maximum number of Tags is exceeded. | 超过了标签的最大数目。 | 诊断 |
| 403 | OperationDenied.AliUid | The specified AliUid is not authorized to operate this resource. | 指定的AliUid无权操作该资源。 | 诊断 |
| 403 | OperationDenied.AliUid | The current account (%s) does not have permission to operate on this subscription object (%s). | 当前账户(%s)对该订阅对象(%s)无操作权限。 | 诊断 |
| 403 | OperationDenied.AliUid | This user (%s) does not have permission to operate. | 该用户(%s)无权限操作。 | 诊断 |
| 403 | OperationDenied.JobStatus | The current job status does not allow this operation. | 当前任务状态不允许此操作。 | 诊断 |
| 400 | OperationDenied.NetworkReachableAnalysis | The operation is not allowed because of invalid parameters. | 请求存在非法参数,当前操作不被允许。 | 诊断 |
| 403 | OperationDenied.NisTrafficRankingId | The specified parameter NisTrafficRankingId(%s) user does not have permission to operate. | 指定的参数NisTrafficRankingId(%s)用户没有操作权限。 | 诊断 |
| 400 | OperationDenied.NtaStop | Refuse to stop the operation. There are instances in the traffic analyzer that enable flow logs. | 拒绝停止操作,流量分析器中存在开启流日志的实例。 | 诊断 |
| 400 | OperationDenied.ServiceOffline | The specified service(%s) has been offline. | 该服务(%s)已下线。 | 诊断 |
| 403 | OperationDenied.TaskId | The specified parameter TaskId(%s) user does not have permission to operate. | 指定的参数TaskId(%s)用户没有操作权限。 | 诊断 |
| 400 | OperationDenied.TaskNotComplete | Task(%s) not completed. | 任务未完成 | 诊断 |
| 400 | OperationDenied.ZonesConflict | The specified available zones do not belong to the same region. | 指定的可用区不属于同一个地域。 | 诊断 |
| 500 | OperationFailed.CloseNonPublicFlowAnalysis | The operation(%s) is failed. | %s操作失败,请稍后重试、或提交工单。 | 诊断 |
| 400 | OperationFailed.DataToMuch | Too many simultaneous times or memory limitations. | 同时进行的次数过多或内存限制. | 诊断 |
| 400 | OperationFailed.DataTooMuch | Too much data has been queried under the specified conditions. Shorten the query time, specify more precise filtering conditions, or try again later. | 指定条件下查询的数据过多,请缩短查询时间、指定更精确过滤条件或者稍后重试。 | 诊断 |
| 400 | OperationFailed.DbConcurrentTooHigh | The operation failed due to too many concurrent queries. Please try again later. | 当前用户过多,导致操作失败,请稍后再重试。 | 诊断 |
| 400 | OperationFailed.DbConcurrentTooHigh | The operation failed due to too many concurrent queries in DB. Please try again. | DB并发查询过多,导致操作失败,请重试。 | 诊断 |
| 400 | OperationFailed.ExceedPurchaseLimit | Your current purchase quantity exceeds the available quantity margin, please re-select the quantity. | 您当前购买数量超过还可购买的数量余量,请重新选择数量. | 诊断 |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | 您当前购买数量超过还可购买的数量余量,请重新选择数量! | 诊断 |
| 400 | OperationFailed.InternalError | An internal error occurred. | 内部错误 | 诊断 |
| 400 | OperationFailed.InvokeApi | Failed to invoke the API operation. | 调用API失败 | 诊断 |
| 400 | OperationFailed.ManifestVersionConflict | Simulation version conflict, inoperable. | 仿真版本冲突,不可操作. | 诊断 |
| 400 | OperationFailed.NoPermission | You are not authorized to call the API operation. | 没有接口调用权限 | 诊断 |
| 400 | OperationFailed.NoRealNameAuthentication | You have not verified your real name. | 您尚未进行实名认证。 | 诊断 |
| 400 | OperationFailed.NotSupport | Do not support you to buy this product. | 暂不支持您购买本商品. | 诊断 |
| 500 | OperationFailed.OpenNonPublicFlowAnalysis | The operation(%s) is failed. | %s操作失败,请稍后重试、或者提交工单。 | 诊断 |
| 400 | OperationFailed.OperationAcceptance | The request to execute the simulation list has been sent, but the system cannot confirm whether the remote end has accepted it. Please check the status before processing. Do not submit it again. | 执行仿真清单的请求已发送,但系统无法确认远端是否已受理,请查询状态后再处理,不要重复提交。 | 诊断 |
| 400 | OperationFailed.ProductInfo | Failed to obtain product information. | 获取商品信息失败. | 诊断 |
| 400 | OperationFailed.QueryIpPoolFailed | Failed to query IP resource pool. | 查询IP资源库失败 | 诊断 |
| 503 | OperationFailed.ServiceOverloaded | The number of relative resources has exceeded the service limit. | 指定条件下查询的数据过多,请减小资源关系查询层数(Depth)、指定更精确查询关系后再重试。 | 诊断 |
| 400 | OperationFailed.SimulationResourceMismatch | The current resource (%s) does not match. | 当前资源(%s)不匹配. | 诊断 |
| 400 | OperationFailed.SnapshotAlreadyExecuted | The current snapshot has been executed. | 当前快照已被执行. | 诊断 |
| 400 | OperationFailed.SnapshotAlreadyExecuted | The current snapshot has already been executed. Create a new snapshot to execute. | 当前快照已被执行过,请重新新建快照执行。 | 诊断 |
| 400 | OperationFailed.SnapshotChanged | The snapshot has been changed. | 快照已被变更。 | 诊断 |
| 400 | OperationFailed.SnapshotNotStable | There is currently a simulation or snapshot that is being executed and cannot be processed for the time being. Try again later after the execution is completed. | 目前存在正在执行中的仿真或快照,暂不可处理,稍后待执行完重试。 | 诊断 |
| 400 | OperationFailed.UnableToPurchase | The product code does not have the product tag on the cloud of the group and cannot be purchased (it is recommended to purchase pay-as-you-go products in the group internal scenario to avoid the release of the package year and the package month). | 商品code无集团上云商品标签,无法购买(集团内部场景建议购买按量付费商品,避免包年包月过期释放) | 诊断 |
| 400 | OperationFailed.UpstreamData | The current snapshot is missing a required field (%s). | 当前快照缺少必要字段(%s). | 诊断 |
| 400 | OptInRequired.Cms | The user has not yet activated the (Cms) service. | 用户暂未开通(Cms)服务。 | 诊断 |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. | 没有使用VPC流日志的权限。有可能VPC流日志未开通。 | 诊断 |
| 400 | OptInRequired.FlowLogService | The flow log service has not been activated. Please activate it and try again. | 流日志服务未开通,请开通后再重试。 | 诊断 |
| 400 | ORD_T_ITEM_QUERY_ERROR | Failed to query commodity specification from ORD service. The commodity may not be available or the service is temporarily down. | 调用商品规格服务(ORD)查询商品详情失败,通常因商品未上架或规格服务异常导致。 | 诊断 |
| 404 | ParameterCenInstanceId | The specified CEN instance id does not exist. | 指定的CEN实例ID不存在。 | 诊断 |
| 400 | QuotaExceeded.SessionTask | The maximum number of session tasks (%s) has been reached. | 当前会话任务数已达最大限制(%s)。 | 诊断 |
| 400 | QuotaExceeded.AnalysisLogs | The AnalysisLogs cannot exceed 100. | 该AnalysisLogs不能超过100个 | 诊断 |
| 400 | QuotaExceeded.CheckRowReadLimit | The query time range exceeds the read data rows quota %s. Shorten the query interval. | 查询时间范围超出读取数据行配额 %s,请缩短查询间隔。 | 诊断 |
| 400 | QuotaExceeded.CheckRowReadLimit | The query time range (%s) exceeds the number of data rows limit. Shorten the query interval. | 查询时间范围(%s)超出数据行数限制,请缩短查询区间。 | 诊断 |
| 400 | QuotaExceeded.DeliveryAliUid | The maximum quota for user postings has been exceeded with% s/%s. | 已超出用户投递的最大配额,使用量为 %s/%s。 | 诊断 |
| 400 | QuotaExceeded.DeliveryMonitorScope | The maximum quota for %s delivery has been exceeded with %s/%s. | 已超出%s投递的最大配额,使用量为 %s/%s。 | 诊断 |
| 400 | QuotaExceeded.DeliveryMonitorScope | The maximum quota for% s delivery has been exceeded with% s/%s. | 已超出%s投递的最大配额,使用量为 %s/%s。 | 诊断 |
| 400 | QuotaExceeded.DeliveryMonitorScope | The maximum quota for MonitorScope delivery has been exceeded with% s/%s. | 已超出MonitorScope投递的最大配额,使用量为 %s/%s。 | 诊断 |
| 400 | QuotaExceeded.FlowLogCountQuota | The FlowLog quantity has reached the quota limit (current quantity:%s). To increase the quota, go to the quota center to apply (https://quotas.console.aliyun.com/products/vpc/quotas). | FlowLog数量已达到配额上限(当前数量:%s),如需提升配额,请前往配额中心申请(https://quotas.console.aliyun.com/products/vpc/quotas?query=flowlog)。 | 诊断 |
| 400 | QuotaExceeded.ManifestActions | The current action quantity exceeds the limit. | 当前action数量超限。 | 诊断 |
| 400 | QuotaExceeded.MaxNraCount | The maximum number of reachability analysis task is exceeded. | 保存的路径分析任务数量已超过规格。 | 诊断 |
| 400 | QuotaExceeded.NetworkPath | The quota of %s is exceeded, usage %s/%s. | 网络路径数量(%s)超过阈值,使用率:%s/%s。 | 诊断 |
| 400 | QuotaExceeded.NotificationChannels | The number of notification channels exceeds the quota limit. | 通知渠道数量超过配额限制。 | 诊断 |
| 400 | QuotaExceeded.ParallelDiagnosisLimit | The number of parallel diagnostic tasks exceeds the upper limit. | 并行的诊断任务数量已超过规格。 | 诊断 |
| 400 | QuotaExceeded.ParallelInspectionLimit | The quota of %s is exceeded, usage %s, limit %s. | 巡检对象超过配额 | 诊断 |
| 400 | QuotaExceeded.ParallelNraLimit | The maximum number of parallel reachability analysis task is exceeded. | 并行的路径分析任务数量已超过规格。 | 诊断 |
| 400 | QuotaExceeded.ScheduledJob | The number of scheduled jobs exceeds the quota limit. | 定时巡检任务数量超过配额限制。 | 诊断 |
| 400 | QuotaExceeded.SessionTask | The current session has reached the maximum number of submitted tasks (%s). | 当前会话提交的任务数已达最大限制(%s)。 | 诊断 |
| 400 | QuotaExceeded.Task | The current task configuration exceeds the limit. | 当前任务配置超出限制. | 诊断 |
| 404 | Rd.Absent.Error | Permission denied,current user is not in RD. | 正使用多账号模式访问,但当前账号未开通资源目录,访问被拒绝。请使用资源目录管理员访问或退出多账号模式 | 诊断 |
| 400 | ResourceAlreadyAssociated.NatGatewayId | The TopN feature has been enabled for the NAT gateway (%s). | 该Nat网关实例(%s)此前已打开TopN功能,无需重复打开。 | 诊断 |
| 400 | ResourceAlreadyExist.AliUid | The current user (%s) has been opened via NaPal and cannot regain the new user free benefit. | 当前用户(%s)已开通过NaPal,无法重新领取新用户免费权益。 | 诊断 |
| 400 | ResourceAlreadyExist.AliUid | The specified inspection task of %s already exists. | 用户的巡检任务已经存在 | 诊断 |
| 400 | ResourceAlreadyExist.NetworkPath | The specified resource of %s already exists. | 指定的网络路径配置%s已存在。 | 诊断 |
| 400 | ResourceAlreadyExist.NotifyConfig | The specified NotifyConfig(%s) already exists. | 指定的NotifyConfig(%s) 已存在。 | 诊断 |
| 400 | ResourceAlreadyExist.SourceVpc | This feature has already been enabled for the VPC (%s). | 指定的VPC实例(%s)已经开通此功能,不能重复开通。 | 诊断 |
| 400 | ResourceAlreadyExist.SubscriptionObject | Duplicate configuration already exists for subscription object (%s). | 订阅对象(%s)已存在重复配置。 | 诊断 |
| 400 | ResourceAlreadyExist.SubscriptionObject | Duplicate configuration already exists for the subscription object. | 订阅对象已存在重复配置。 | 诊断 |
| 400 | ResourceInUse.Action | Submitted action cannot be submitted repeatedly. | 已提交动作不可重复提交。 | 诊断 |
| 400 | ResourceInUse.CreateSubscriptionObject | The subscription object is being created. Repeated creation is not supported. | 该订阅对象正在创建中,不支持重复创建。 | 诊断 |
| 400 | ResourceInUse.Operation | The current operation is in progress, please try again later. | 当前操作正在执行中,请稍后重试. | 诊断 |
| 400 | ResourceInUse.TaskId | The task is currently running, please try again later. | 当前任务正在运行中,请稍后重试。 | 诊断 |
| 404 | ResourceNotFound.AnalysisTaskIds | The instance resource (%s) does not exist. | 该实例资源(%s)不存在. | 诊断 |
| 404 | ResourceNotFound.CenId | The current resource (%s) does not exist. | 当前资源(%s)不存在. | 诊断 |
| 404 | ResourceNotFound.CommodityCode | %s can not be deactivated because it has not been activated. | 无法关闭未开通的服务%s。 | 诊断 |
| 400 | ResourceNotFound.CommodityCode | The specified Commodity ID (%s) is not be activated. | 指定的商品(%s)未被开通,无法关闭。 | 诊断 |
| 404 | ResourceNotFound.ContextId | The current resource (%s) was not found under the current user. | 当前资源(%s)在当前用户下没有找到。 | 诊断 |
| 404 | ResourceNotFound.DataSourceId | The resource (%s) information does not exist. | 该资源(%s)信息不存在。 | 诊断 |
| 404 | ResourceNotFound.DiagnosisReportId | The specified resource of %s is not found. | 指定的诊断报告ID %s不存在,可能已删除或者指定的ID错误。 | 诊断 |
| 404 | ResourceNotFound.DiagnosisReportIds | The resource (%s) does not exist. | 该资源(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.DiagnosisTask | The specified resource of %s is not found. | 指定的诊断任务%s不存在,可能已删除或者拼写错误。 | 诊断 |
| 404 | ResourceNotFound.EventId | The current resource EventId(%s) does not exist. | 当前资源EventId(%s)不存在。 | 诊断 |
| 400 | ResourceNotFound.Flowlog | The specified resource does not exist. | 指定的资源不存在。 | 诊断 |
| 404 | ResourceNotFound.InsightId | The specified InsightId(%s) parameter does not exist. | 指定的InsightId(%s)参数不存在。 | 诊断 |
| 404 | ResourceNotFound.InspectionReportId | The specified InspectionReportId(%s) is not found. | 指定的InspectionReportId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.InspectionResource | The current resource InspectionResource(%s) does not exist. | 当前资源InspectionResource(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.InspectionResource | The specified InspectionTaskId(%s) resource does not exist. | 指定的InspectionTaskId(%s)资源不存在. | 诊断 |
| 404 | ResourceNotFound.InspectionTaskId | The specified InspectionTaskId(%s) is not found. | 指定的InspectionTaskId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.InstanceId | The specified InstanceId(%s) does not exist. | 指定的InstanceId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.InstanceId2 | The parameter InstanceId2(%s) instance resource specified does not exist. | 指定的参数InstanceId2(%s) 实例资源不存在。 | 诊断 |
| 404 | ResourceNotFound.IpSets | The specified instance does not exist or does not have any acceleration region. | 指定的实例不存在或者没有加速区域。 | 诊断 |
| 404 | ResourceNotFound.JobId | The specified JobId(%s) does not exist. | 指定的JobId(%s) 不存在。 | 诊断 |
| 404 | ResourceNotFound.ManifestId | The current resource information (%s) does not exist. | 当前资源信息(%s)不存在. | 诊断 |
| 404 | ResourceNotFound.MappingId | The resource (%s) does not exist. | 该资源(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.MetricSubscriptionId | The current resource MetricSubscriptionId(%s) does not exist. | 当前资源MetricSubscriptionId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.MetricSubscriptionIds | The current resource MetricSubscriptionIds(%s) does not exist. | 当前资源MetricSubscriptionIds(%s)不存在。 | 诊断 |
| 400 | ResourceNotFound.NetworkPath | The specified resource of %s is not found. | 指定的网络路径%s不存在,可能已删除或者指定的ID错误。 | 诊断 |
| 404 | ResourceNotFound.NetworkPathId | The instance resource (%s) does not exist. | 该实例资源(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.NetworkReachableAnalysis | The specified resource of %s is not found. | 指定的网络路径分析ID %s不存在,可能已删除或者指定的ID错误。 | 诊断 |
| 404 | ResourceNotFound.NetworkReachableAnalysisId | The instance resource (%s) does not exist. | 该资源(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.NisMetricSubscriptionId | The current resource NisMetricSubscriptionId(%s) does not exist. | 当前资源NisMetricSubscriptionId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.NisMetricSubscriptionIds | The current resource NisMetricSubscriptionIds(%s) does not exist. | 当前资源NisMetricSubscriptionIds(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.NisTrafficRankingId | The specified parameter NisTrafficRankingId(%s) does not exist. | 指定的参数NisTrafficRankingId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.NotifyConfig | The specified NotifyConfig(%s) does not exist. | 指定的NotifyConfig(%s) 不存在。 | 诊断 |
| 404 | ResourceNotFound.NtaNotStorageBucket | The data source bound to the traffic analyzer does not have a corresponding storage configuration. | 该流量分析器绑定的数据源无对应的存储配置。 | 诊断 |
| 404 | ResourceNotFound.RecommendationCode | The specified parameter RecommendationCode(%s) does not exist. | 指定的参数RecommendationCode(%s) 不存在。 | 诊断 |
| 404 | ResourceNotFound.ReportId | The instance resource (%s) does not exist. | 该实例资源(%s)不存在 | 诊断 |
| 404 | ResourceNotFound.ResourceId | The instance resource (%s) does not exist. | 该实例(%s)资源不存在. | 诊断 |
| 404 | ResourceNotFound.SessionId | The current resource SessionId(%s) does not exist. | 当前资源SessionId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.SimulationNextHop | The current next hop (%s) does not match. | 当前下一跳(%s)不匹配. | 诊断 |
| 404 | ResourceNotFound.SimulationResource | The resource (%s) to be deleted does not exist. | 待删除资源(%s)不存在. | 诊断 |
| 404 | ResourceNotFound.SimulationTarget | The current resource information (%s) does not exist. | 当前资源信息(%s)不存在. | 诊断 |
| 404 | ResourceNotFound.SnapshotId | The current snapshot resource (%s) does not exist. | 当前快照资源(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.TaskId | The current resource TaskId(%s) does not exist. | 当前资源TaskId(%s)不存在。 | 诊断 |
| 404 | ResourceNotFound.TaskId | The specified parameter TaskId(%s) does not exist. | 指定的参数TaskId(%s)不存在。 | 诊断 |
| 400 | ResourceNotFound.TaskId | The specified TaskId(%s) parameter does not exist. | 指定的TaskId(%s)参数不存在。 | 诊断 |
| 400 | ResourceNotFound.Tr.Vpc | No ENI is available under the VPC covered by this Intra-region traffic analysis. | 此同域流量分析覆盖的VPC下无可用的ENI。 | 诊断 |
| 404 | ResourceNotFound.TrafficAnalyzerId | The specified resource TrafficAnalyzerId(%s) does not exist. | 指定的资源TrafficAnalyzerId(%s)不存在。 | 诊断 |
| 400 | ResourceNotFound.TrafficAnalyzerId | The specified TrafficAnalyzerId(%s) resource does not exist. | 指定的TrafficAnalyzerId(%s)资源不存在。 | 诊断 |
| 400 | ResourceNotFound.TrafficAnalyzerIdOneTupleDimension | The specified traffic analyzer does not have a corresponding one-element group storage configuration. | 指定的流量分析器没有对应的一元组存储配置。 | 诊断 |
| 404 | ResourceNotFound.TrafficAnalyzerIdTupleDimension | The specified traffic analyzer does not have a corresponding two-five-element group storage configuration. | 指定的流量分析器没有对应的二五元组存储配置。 | 诊断 |
| 400 | ResourceNotSupport.Depth | The specified Depth(%s) is invalid. | 指定的资源关系层级Depth(%s)超出查询限制。 | 诊断 |
| 400 | ResourceNotSupport.IP | The specified IP(%s) does not exist. | 指定的IP(%s)不存在。 | 诊断 |
| 400 | ResourceNotSupport.ResourceType | The specified ResourceType(%s) is not invalid. | 指定的ResourceType(%s)不支持查询资源关系。 | 诊断 |
| 400 | Route.Node.Expired | The node is expired. Refresh the page. | 节点已过期,请刷新页面。 | 诊断 |
| 400 | SimulationNextHopNotFound | The next hop instance or connection does not exist in the current simulation. | 当前仿真中下一跳实例或连接不存在. | 诊断 |
| 400 | SimulationTargetNotFound | The current routing table does not exist in the simulation. | 当前路由表在仿真中不存在。 | 诊断 |
| 400 | SizeExceeds.DestinationRegions | The length of the specified destination regions exceeds the limit. | 指定的目的地域列表长度超过限制。 | 诊断 |
| 400 | SizeExceeds.DestinationZones | The length of the specified destination zones exceeds the limit. | 指定的目的可用区列表长度超过限制。 | 诊断 |
| 400 | SizeExceeds.DiskCategories | The length of the specified disk categories exceeds the limit. | 指定的磁盘类型列表长度超过限制。 | 诊断 |
| 400 | SizeExceeds.MaxResults | The value of maxResults exceeds the limit. | maxResults超过了最大分页大小 | 诊断 |
| 400 | SizeExceeds.SourceRegions | The length of the specified source regions exceeds the limit. | 指定的源地域列表长度超过限制。 | 诊断 |
| 400 | SizeExceeds.SourceZones | The length of the specified source zones exceeds the limit. | 指定的源可用区列表长度超过限制。 | 诊断 |
| 400 | SizeExceeds.Zones | The length of the specified available zones exceeds the limit. | 指定的可用区列表长度超过限制。 | 诊断 |
| 500 | SystemBusy | The system is busy now. Please try again later. | 当前查询繁忙,请等待片刻后重试 | 诊断 |
| 400 | SystemBusy | The system is busy. Please try again later. | 系统正忙,请稍后重试。 | 诊断 |
| 429 | Throttling.CreateTask | The user has a running task and creation is prohibited. | 用户存在运行中的任务,禁止创建。 | 诊断 |
| 400 | UnsupportedFeature.Action | The current operation is not supported. | 当前操作不支持。 | 诊断 |
| 400 | UnsupportedFeature.CloudIp | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedFeature.DestinationIp | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤. | 诊断 |
| 400 | UnsupportedFeature.DestinationPort | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedFeature.Protocol | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedFeature.QueryTimeRange | The specified query time range is too long. You can query data less than %s. | 指定的查询时间范围过长,支持查询%s以内的数据。 | 诊断 |
| 400 | UnsupportedFeature.SourceIp | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedFeature.SourcePort | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedFeature.Target | The current content (%s) is not supported. | 当前内容(%s)不支持. | 诊断 |
| 400 | UnsupportedFeature.TrafficPath | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤. | 诊断 |
| 400 | UnsupportedFeature.VpcId | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedFeature.VSwitchId | Filtering by current field (%s) is not supported under this tuple. | 该元组下不支持按当前字段(%s)过滤。 | 诊断 |
| 400 | UnsupportedRegion | The current (%s) service does not support this (%s) region. | 当前(%s)服务不支持此(%s)地域。 | 诊断 |
| 400 | UnsupportedRegion | This feature is not supported in the current region. | 当前地域不支持此功能。 | 诊断 |
| 400 | UnsupportedRegion.DataSourceRegionId | This function is not supported in the current region. | 当前地域不支持该功能. | 诊断 |
该文章对您有帮助吗?