错误码
|
HTTP status code |
错误码 |
错误信息 |
描述 |
操作 |
| 400 | AssociationExist.TrafficQos | The traffic qos with the specified attachment already exists. | 该Attachment已存在流量调度策略。 | 诊断 |
| 400 | AssociationExist.TransitQosQueueExist | The qos queue with the specified TrafficQosPolicyId exists. | 该流量调度策略上存在队列配置，请先删除队列后再删除调度策略。 | 诊断 |
| 400 | AssociationExist.TransitQosRuleExist | The rule with the specified TrafficMarkingPolicy already exists. | 该流量标记策略上存在规则配置，请先删除规则后再删除标记策略。 | 诊断 |
| 400 | AssociationExist.TransitRouterTable | The specified association already exists. | 路由表关联已经存在。 | 诊断 |
| 400 | AssociationExist.VSwitchIds | The association already exists. | Vswitch已绑定。 | 诊断 |
| 400 | AttrMismatching.CidrAddressFamily | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match AddressFamily. | 流分类规则的源网段或目的网段与地址族不匹配，请修正后重试。 | 诊断 |
| 400 | AttrMismatching.CidrProtocol | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match Protocol. | 流分类规则的流量报文的源网段（SrcCidr）或目的网段（DstCidr）与协议（Protocol）不匹配，请按照官方文档修改后再重新执行该操作。 | 诊断 |
| 400 | AttrMismatching.SrcCidrDstCidr | Attribute SrcCidr of TrafficMarkRule does not match DstCidr. | 流分类规则的源网段和目的网段的地址族不一致，请修正后重试。 | 诊断 |
| 404 | Bid.NotFound | Not found Bid by specified AliUid. | bid不存在。 | 诊断 |
| 404 | Bid.NotFound | Not found childInstance Bid by specified AliUid. | bid不存在。 | 诊断 |
| 400 | BothEmpty.TagsAndResources | Both of Tags and ResourceIds is empty. | Tags和ResourceIds均为空。 | 诊断 |
| 409 | Cloud service routes exist. | Operation is invalid because custom region-domain route entry exist | 存在云服务路由无法操作。 | 诊断 |
| 400 | CloudRoute.Conflict | The Specified Cloud Route Conflicts. | 云服务路由冲突。 | 诊断 |
| 400 | CloudRoute.Exist | The Specified Cloud Route already Exists | 云服务路由已存在。 | 诊断 |
| 400 | CloudRoute.VpcNotAttached | The Specified Vpc instance is not attached to CEN. | 指定的VPC没有绑定到CEN上。 | 诊断 |
| 400 | CloudRoute.VpcNotAttached | The specified Vpc instance has not been attached to CEN. | 指定Vpc实例未绑定云企业网。 | 诊断 |
| DB.Error | db error | 数据库报错 | 诊断 | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | DryRun请求验证通过。 | 诊断 |
| 400 | Duplicated.AddTrafficMatchRules | The parameter AddTrafficMatchRules are duplicated. | AddTrafficMatchRules存在重复的条目。 | 诊断 |
| 400 | Duplicated.AddTrafficMatchRulesAndDeleteTrafficMatchRules | The same rule in AddTrafficMatchRules and DeleteTrafficMatchRules is not supported.. | AddTrafficMatchRules和DeleteTrafficMatchRules不允许存在相同的条目，请先删除后添加。 | 诊断 |
| 400 | Duplicated.DeleteTrafficMatchRulese | The parameter DeleteTrafficMatchRules are duplicated. | DeleteTrafficMatchRules存在重复的条目。 | 诊断 |
| 400 | Duplicated.Dscps | The parameter Dscps are duplicated. | Dscps重复。 | 诊断 |
| 400 | Duplicated.MarkingDscp | The parameter MarkingDscp is duplicated. | MarkingDscp重复。 | 诊断 |
| 400 | Duplicated.Priority | The parameter Priority is duplicated. | Priority重复。 | 诊断 |
| 400 | Duplicated.TrafficMatchRules | The parameter TrafficMatchRules are duplicated. | 参数中指定的TrafficMatchRules条目重复。 | 诊断 |
| 400 | Duplicated.TrafficMatchRules | The parameter AddTrafficMatchRules are duplicated. | 传入的流分类规则重复。 | 诊断 |
| 400 | Duplicated.ZoneMapping | The parameter ZoneMapping is duplicated. | ZoneMapping中存在重复的条目。 | 诊断 |
| 400 | DuplicatedParam.TagKey | The parameter TagKey is duplicated. | 参数TagKey重复。 | 诊断 |
| 400 | EntityNotExist.Account | The role not exists: AliyunServiceRoleForCEN. | AliyunServiceRoleForCEN不存在。 | 诊断 |
| 400 | FilterKeyDuplicated.RouteFilter | The keys in RouteFilter are duplicated. | RouteFilter中的key值重复 | 诊断 |
| 400 | Flowlog.AlreayExist | This attachment already has existed flowlog instance. | flowlog已存在，无法重复创建。 | 诊断 |
| 400 | Forbbiden.AttachAcrossBidEcr | Attach cross bid ECR is unsupported. Please submit a ticket. | 不允许绑定不同Bid账号下的ECR，请提交工单申请。 | 诊断 |
| 400 | Forbbiden.AttachChildInstanceAcrossBid | VPCs that belong to another BID cannot be associated. You need to apply for cross-BID attaching. | 不允许绑定不同bid账号下的VPC。 | 诊断 |
| 400 | Forbbiden.CloudBoxVSwitchExist | The operation is not allowed because of cloud box vswitch existed. | 存在云盒的vswitch，无法绑定 | 诊断 |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | 子账号权限不足。 | 诊断 |
| 400 | Forbbiden.TransitRouterServiceNotOpen | The user has not open transit router service. | 转发路由器服务未打开，请打开后重试。 | 诊断 |
| 400 | Forbidden.AssociatedUnsupportedInterRegionTrafficQosPolicy | The transit router associated with the bandwidth plan has an inter-region traffic scheduling policy that allocates bandwidth based on absolute values. You must delete this policy before you can change the configurations. | 检测到您的带宽包关联的TR配置了带宽保障类型为按带宽绝对值模式的跨地域流量调度策略，需要先删除该策略，再进行变配操作。 | 诊断 |
| 403 | Forbidden.AttachChildInstance | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | 该VBR无法加载到云企业网中，请提交工单进行处理。 | 诊断 |
| 403 | Forbidden.CcnPublicNetworkOptimizationExist | Please disable CCN public network optimization and try again. | 请关闭CCN公网加速功能后重试 | 诊断 |
| 400 | Forbidden.CDTServiceExpired | The CDT service is out of service. | 云数据传输服务已欠费停服，请续费后重试。 | 诊断 |
| 400 | Forbidden.CenRouteMapExist | The specified CEN route map ID already exists. | 路由策略已经存在。 | 诊断 |
| 400 | Forbidden.NoMedAuthorized | Med operation is unauthorized. | 无法对指定的Med路由策略进行操作。 | 诊断 |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | 不允许配置系统tag。 | 诊断 |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | 来自共享的资源不允许操作。 | 诊断 |
| 400 | Forbidden.PrivatezoneRouteExisted | Operation Forbidden. There is a Privatezone Route associated with the instance, please dessociate it firstly. | Privatezone Route存在，请先删除相关配置后重试。 | 诊断 |
| 400 | Forbidden.PrivatezoneServiceNotAuthorize | Privatezone service not to grant authorization. | Privatezone 服务未授权。 | 诊断 |
| 403 | Forbidden.Release | Forbidden to release a PREPAY bandwidth instance within validity period. | 有效期内无法释放预付费带宽包。 | 诊断 |
| 403 | Forbidden.ResourceGroup | The operation cannot be performed on the specified ResourceGroup. | 无法对指定的ResourceGroup进行操作。 | 诊断 |
| 400 | Forbidden.ResourceOwnerTransitRouterServiceExpired | The transit router service of the account to which the resource belongs has been suspended due to arrears. Please notify the other party to renew the service and try again. | 资源所属账号的转发路由器服务已欠费停服，请通知对方续费后重试。 | 诊断 |
| 400 | Forbidden.ResourceOwnerTransitRouterServiceNotOpen | The resource owner user has not opened transit router service. | 资源所属账号转发路由器服务未开通，请通知对方开通后重试。 | 诊断 |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | 无法操作tag key。 | 诊断 |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | 无法操作tag key。 | 诊断 |
| 400 | Forbidden.TransitRouterServiceExpired | The transit router service is out of service. | 转发路由器服务已欠费停服，请续费后重试。 | 诊断 |
| 400 | Forbidden.TypeInvalid | The specified ChildInstanceType or TransitRouterType is not supported by this operation. | 指定的ChildInstanceType或TransitRouterType不支持该操作。 | 诊断 |
| 400 | Forbidden.VbrDeviceModel | Attach VBR on some access device models are forbidden. | vbr当前接入模式不支持该操作。 | 诊断 |
| 403 | Forbidden.VbrDeviceModel | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | Vbr当前接入模式不支持该操作。 | 诊断 |
| 500 | GenerateUniqueInstanceId.Failed | Generate unique instance id failed. | id生成错误，请重试。 | 诊断 |
| 404 | GeographicRegion.NotFound | The specified geographic region is not found. | 指定geographic region不存在。 | 诊断 |
| 400 | IdentityRegistrationStatusNotSupport | Real name registration of enterprises required. | 需要完成企业实名登记 | 诊断 |
| 400 | Illegal.Description | Description is illegal. | 描述不合法。 | 诊断 |
| 400 | Illegal.Name | Name is illegal. | 名字不合法。 | 诊断 |
| 400 | Illegal.SourceIpOrTargetIp | The specified source IP address or destination IP address is invalid. | 源IP或者目的IP非法。 | 诊断 |
| 400 | Illegal.SourceIpOrTargetIp | Parameter SourceIp or TargetIp illegal | 参数中指定的SourceIp或TargetIp不合法。 | 诊断 |
| 400 | Illegal.TrType | The TransitRouter type is illegal. | 转发路由器类型不支持该操作。 | 诊断 |
| 400 | IllegalParam.AddOrRemoveZoneMappings | The specified AddZoneMappings or RemoveZoneMappings are illegal. | 参数中指定的AddZoneMappings或RemoveZoneMappings不合法。 | 诊断 |
| 400 | IllegalParam.AddressFamily | AddressFamily is illegal. | 请求参数AddressFamily值非法，有效值为IPv4或IPv6。 | 诊断 |
| 400 | IllegalParam.AggregationRouteCidr | The aggregation route cidr is illegal. | 参数中指定的cidr不合法。 | 诊断 |
| 400 | IllegalParam.AssociateRouteTableId | The specified AssociateRouteTableId is illegal. | 参数中指定的AssociateRouteTableId不合法。 | 诊断 |
| 400 | IllegalParam.AttachmentBandwidthExceed | The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value. | 输入的带宽使得QoS总保障带宽超过了跨地域带宽分配的值。 | 诊断 |
| 400 | IllegalParam.AttachmentId | The specified AttachmentId is illegal. | 参数中指定的AttachmentId不合法。 | 诊断 |
| 400 | IllegalParam.Bandwidth | Bandwidth is illegal | 跨地域连接时入参带宽值非法。 | 诊断 |
| 400 | IllegalParam.Bandwidth | Bandwidth is illegal. | 带宽包ID不合法。 | 诊断 |
| 400 | IllegalParam.BandwidthGuaranteeMode | The input bandwidth guarantee type is not valid. | 输入的带宽保障类型不合法。 | 诊断 |
| 400 | IllegalParam.BandwidthGuaranteeModeMismatch | The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent. | 带宽保障类型和带宽绝对值或百分比的类型不匹配。 | 诊断 |
| 400 | IllegalParam.BandwidthLessThanQosPolicyBandwidth | The input bandwidth value is less than the sum of the Qos policy bandwidth. | 输入的带宽值小于QoS按带宽分配的限速值总和。 | 诊断 |
| 400 | IllegalParam.BandwidthPackageStatus | The status of the bandwidth package is incorrect. | 带宽包的状态错误。 | 诊断 |
| 400 | IllegalParam.BandwidthType | BandwidthType is illegal. | 带宽包类型不合法。 | 诊断 |
| 400 | IllegalParam.CenBandwidthPackageId | Parameter CenBandwidthPackageId is illegal. | 参数中指定的CenBandwidthPackageId不合法。 | 诊断 |
| 400 | IllegalParam.CenId | The specified CenId is invalid. | 云企业网实例ID非法。 | 诊断 |
| 400 | IllegalParam.CenId | The specified CenId is illegal. | 指定的cenId不合法。 | 诊断 |
| 400 | IllegalParam.CenIdOrRegionId | The specified CenId or RegionId is invalid. | 指定的CenId或RegionId不合法。 | 诊断 |
| 400 | IllegalParam.ChargeType | The specified ChargeType is illegal. | 付费类型非法 | 诊断 |
| 400 | IllegalParam.Cidr | The specified cidr is invalid. | 参数中指定的cidr不合法。 | 诊断 |
| 400 | IllegalParam.Cidr | Cidr is illegal. | 参数中指定的cidr不合法。 | 诊断 |
| 400 | IllegalParam.DstCidr | DstCidr is illegal. | 参数中指定的DstCidr不合法。 | 诊断 |
| 400 | IllegalParam.DstCidr | The specified DstCidr is invalid. | 参数中指定的DstCidr不合法。 | 诊断 |
| 400 | IllegalParam.DstPortRange | The specified DstPortRange is illegal. | 目的端口不合法 | 诊断 |
| 400 | IllegalParam.EffectiveBandwidthFilter | The input bandwidth filter value is not valid. | 输入的带宽过滤值不合法。 | 诊断 |
| 400 | IllegalParam.GatewayZoneId | The GatewayZoneId specified in the parameter is illegal. | 参数中指定的GatewayZoneId非法。 | 诊断 |
| 400 | IllegalParam.GroupIpAddress | The specified GroupIpAddress is illegal. | 参数中指定的GroupIpAddress不合法。 | 诊断 |
| 400 | IllegalParam.Igmpv2Support | The specified Igmpv2Support is illegal. Valid values are [enable, disable]. | 参数Igmpv2Support不合法，取值范围：enable、disable。 | 诊断 |
| 400 | IllegalParam.Ipv6Support | Ipv6Support is illegal. Valid Values are [enable, disable]. | 请求参数Ipv6Support值非法，有效值为enable或disable。 | 诊断 |
| 400 | IllegalParam.LocalIp | The specified LocalIp is invalid. | 参数中指定的LocalIp不合法。 | 诊断 |
| 400 | IllegalParam.LongestPrefixMatchCidr | LongestPrefixMatchCidr is invalid. | LongestPrefixMatchCidr参数不合法 | 诊断 |
| 400 | IllegalParam.MarkingDscp | MarkingDscp is illegal. | 参数中指定的MarkingDscp不合法。 | 诊断 |
| 400 | IllegalParam.MatchDscp | MarkingDscp is invalid. | MarkingDscp参数不合法。 | 诊断 |
| 400 | IllegalParam.MaxResults | The parameter MaxResults is invalid. | 参数MaxResults不合法。 | 诊断 |
| 400 | IllegalParam.MaxResults | The specified MaxResults is invalid. | 参数MaxResults不合法。 | 诊断 |
| 400 | IllegalParam.MaxResults | The specified MaxResults is illegal. | MaxResults非法。 | 诊断 |
| 400 | IllegalParam.NetworkType | NetworkType is invalid. | 参数NetworkType非法。 | 诊断 |
| 400 | IllegalParam.NextHopType | The NextHopType is illegal. | 参数中指定的NextHopType不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | NextToken is invalid. | NextToken不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | NextToken是无效的。 | 诊断 |
| 400 | IllegalParam.NextToken | The parameter NextToken is invalid. | 指定的NextToken无效。请检查参数约束，并在修改后重试。 | 诊断 |
| 400 | IllegalParam.NextToken | NextToken is illegal | 参数中指定的NextToken不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | NextToken is illegal. | 参数中指定的NextToken不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | The nextToken is illegal. | 参数中指定的NextToken不合法。 | 诊断 |
| 400 | IllegalParam.NextToken | The specified NextToken is illegal. | 参数中指定的NextToken不合法。 | 诊断 |
| 400 | IllegalParam.PageNumber | The specified PageNumber is illegal. | 请求参数PageNumber非法，取值必须大于0。 | 诊断 |
| 400 | IllegalParam.PageSize | The specified PageSize is illegal. | 请求参数PageSize非法，取值范围[1, 50]。 | 诊断 |
| 400 | IllegalParam.PeerIp | The PeerIp in the parameter is invalid. | 参数中PeerIp参数非法。 | 诊断 |
| 400 | IllegalParam.PeerRegionId | PeerRegionId is illegal. | 参数中指定的PeerRegionId不合法。 | 诊断 |
| 400 | IllegalParam.PeerTransitRouterId | PeerTransitRouterId is illegal. | 跨地域连接时，对端的转发路由器ID非法。 | 诊断 |
| 400 | IllegalParam.PeerTrMulticastDomainId | The specified PeerTrMulticastDomainId is illegal. | 参数中指定的PeerTrMulticastDomainId不合法。 | 诊断 |
| 400 | IllegalParam.PrefixExactMatchCidr | PrefixExactMatchCidr is invalid. | PrefixExactMatchCidr参数不合法 | 诊断 |
| 400 | IllegalParam.Priority | Priority is illegal. | 参数中指定的Priority不合法。 | 诊断 |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | 参数中指定的Protocol不合法。 | 诊断 |
| 400 | IllegalParam.Protocol | Protocol is illegal. | 参数中指定的Protocol不合法。 | 诊断 |
| 400 | IllegalParam.Region | The specified Region is invalid. | 参数中指定的Region不合法。 | 诊断 |
| 400 | IllegalParam.RegionId | RegionId is illegal. | 参数中指定的Region不合法。 | 诊断 |
| 400 | IllegalParam.RegionId | The Specified Parameter RegionId is illegal | 参数中指定的Region不合法。 | 诊断 |
| 400 | IllegalParam.RegionId | The specified RegionId is illegal. | 参数中指定的Region不合法。 | 诊断 |
| 400 | IllegalParam.RegionId | The Specified Parameter RegionId is illegal. | 参数中指定的Region不合法。 | 诊断 |
| 400 | IllegalParam.RegionIdOrTransitRouterId | The specified RegionId Or TransitRouterId is invalid. | 参数中指定的TransitRouterId或Region不合法。 | 诊断 |
| 400 | IllegalParam.RegionIdOrTransitRouterId | The specified TransitRouterId or RegionId is invalid. | 参数中指定的TransitRouterId或Region不合法。 | 诊断 |
| 400 | IllegalParam.RemainBandwidthPercent | The specified RemainBandwidthPercent is invalid. | 参数中指定的RemainBandwidthPercent不合法。 | 诊断 |
| 400 | IllegalParam.ResourceGroupId | ResourceGroupId is illegal. | 参数中指定的资源组不合法。 | 诊断 |
| 400 | IllegalParam.ResourceId | ResourceId is illegal. | 参赛中指定的ResourceId不合法。 | 诊断 |
| 400 | IllegalParam.ResourceType | ResourceType is invalid. | 参数ResourceType非法。 | 诊断 |
| 400 | IllegalParam.RouteTableId | The specified Route Table ID is invalid. | 路由表ID不合法。 | 诊断 |
| 400 | IllegalParam.ServiceMode | ServiceMode is illegal. | ServiceMode不合法。 | 诊断 |
| 400 | IllegalParam.ServiceMode | The specified ServiceMode is invalid. | 参数中指定的ServiceMode不合法。 | 诊断 |
| 400 | IllegalParam.SrcCidr | The specified SrcCidr is invalid. | 参数中指定的SrcCidr不合法。 | 诊断 |
| 400 | IllegalParam.SrcCidr | SrcCidr is illegal. | 参数中指定的SrcCidr不合法。 | 诊断 |
| 400 | IllegalParam.SrcPortRange | The specified SrcPortRange is illegal. | 源端口不合法 | 诊断 |
| 400 | IllegalParam.SubnetOfMatchCidr | SubnetOfMatchCidr is invalid. | SubnetOfMatchCidr参数不合法 | 诊断 |
| 400 | IllegalParam.SupernetOfMatchCidr | SupernetOfMatchCidr is invalid. | SupernetOfMatchCidr参数不合法 | 诊断 |
| 400 | IllegalParam.SupportMulticast | Basic Transit router is not support multicast. | 基础版转发路由器不支持组播功能。 | 诊断 |
| 400 | IllegalParam.TagKey | The tag keys are not valid. | 参数中指定的tag key不合法。 | 诊断 |
| 400 | IllegalParam.TagValue | The tag values are not valid. | 参数中指定的tag value不合法。 | 诊断 |
| 400 | IllegalParam.TextMatchCidr | The TextMatchCidr specified in the parameter is illegal. | 参数中指定的TextMatchCidr非法。 | 诊断 |
| 400 | IllegalParam.TrafficMarkingRuleIds | The specified TrafficMarkingRuleIds is invalid. | 参数中指定的TrafficMarkingRuleIds不合法。 | 诊断 |
| 400 | IllegalParam.TrafficMatchRuleDescription | TrafficMatchRuleDescription is illegal. | 请求参数TrafficMatchRuleDescription值非法。 | 诊断 |
| 400 | IllegalParam.TrafficMatchRuleName | TrafficMatchRuleName is illegal. | 请求参数TrafficMatchRuleName值非法。 | 诊断 |
| 400 | IllegalParam.TransitRegionMappings | The parameter TransitRegionMappings is illegal. | 参数TransitRegionMappings非法 | 诊断 |
| 400 | IllegalParam.TransitRouterAttachmentId | TransitRouterAttachmentId is illegal. | 参数中指定的TrInstance不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterAttachments | TransitRouterAttachments is illegal. | 参数TransitRouterAttachments不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterDestinationCidrBlock | TransitRouterDestinationCidrBlock is illegal. | 参数中指定的TransitRouterDestinationCidrBlock不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterId | The specified TransitRouterId is invalid. | 参数中指定的TransitRouterId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterId | The specified TransitRouterId is illegal. | 参数中指定的TransitRouterId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterId | The parameter TransitRouterId or RegionId is invalid. | 参数TransitRouterId或RegionId无效。 | 诊断 |
| 400 | IllegalParam.TransitRouterMulticastDomainId | The specified TransitRouterMulticastDomainId is illegal. | 参数中指定的TransitRouterMulticastDomainId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRegionId | TransitRouterRegionId is illegal. | TransitRouterRegionId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryId | TransitRouterRouteEntryId is not found. | 参数中指定的TransitRouterRouteEntryId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopAttachmentId | TransitRouterRouteEntryNextHopAttachmentId is invalid. | TransitRouterRouteEntryNextHopAttachmentId参数不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopResourceId | TransitRouterRouteEntryNextHopResourceId is invalid. | TransitRouterRouteEntryNextHopResourceId参数不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopResourceType | TransitRouterRouteEntryNextHopResourceType is invalid. | TransitRouterRouteEntryNextHopResourceType参数不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopType | TransitRouterRouteEntryNextHopType is invalid. | TransitRouterRouteEntryNextHopType参数不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryOriginResourceId | TransitRouterRouteEntryOriginResourceId is invalid. | TransitRouterRouteEntryOriginResourceId参数不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryOriginResourceType | TransitRouterRouteEntryOriginResourceType is invalid. | TransitRouterRouteEntryOriginResourceType参数非法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryStatus | TransitRouterRouteEntryStatus is invalid. | 转发路由器路由条目状态不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryStatus | TransitRouterRouteEntryStatus is illegal. | 参数中指定的TransitRouterRouteEntryStatus不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteEntryType | TransitRouterRouteEntryType is invalid. | TransitRouterRouteEntryType参数不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRoutEntryDestinationCidrBlock | TransitRouterRoutEntryDestinationCidrBlock is invalid. | 转发路由器路由条目目标网段不合法 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteTableId | TransitRouterRouteTableId is invalid. | 转发路由器路由表实例ID不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteTableId | The transitRouter route table id is illegal. | 参数中指定的TransitRouterRouteTableId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterRouteTableId | TransitRouterRouteTableId is illegal. | 参数中指定的TransitRouterRouteTableId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterTableId | The specified TransitRouterTableId is invalid. | 参数中指定的TransitRouterTableId不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterTableId | The specified Route Table ID is invalid. | 路由表ID不合法。 | 诊断 |
| 400 | IllegalParam.TransitRouterTableType | TransitRouterTableType is illegal. | 该路由表的路由类型不支持该操作。 | 诊断 |
| 400 | IllegalParam.TransitRouterTableType | When peer attachment is associated with a custom routeTable, the Transit Router in both regions must be enterprise. | 跨域attachment关联子表时，跨域两端都必须为企业版转发路由器。 | 诊断 |
| 400 | IllegalParam.TransitRouteTableAggregationCidr | Invalid TransitRouteTableAggregationCidr. | 聚合网段输入错误 | 诊断 |
| 400 | IllegalParam.TransitRouteTableAggregationScope | TransitRouteTableAggregationScope is invalid, valid value is VPC. | 聚合路由的传播范围非法，合法取值为VPC，请修正后重新发起请求。 | 诊断 |
| 400 | IllegalParam.TransportType | The specified TransportType is invalid. | 参数中指定的TransportType不合法。 | 诊断 |
| 400 | IllegalParam.TrInstance | The specified TansiteRouterId is invalid. | 参数TansiteRouterId非法。 | 诊断 |
| 400 | IllegalParam.TrInstance | The specified TransitRouter is invalid. | TransitRouter是无效的。 | 诊断 |
| 400 | IllegalParam.TrInstance | The specified TrInstance is illegal. | 参数中指定的TrInstance不合法。 | 诊断 |
| 400 | IllegalParam.TrInstance | The parameter TransitRouterId or RegionId is invalid. | 参数TransitRouterId或RegionId无效。 | 诊断 |
| 400 | IllegalParam.VSwitchId | VSwitchId is illegal. | 参数中指定的VSwitchId不合法。 | 诊断 |
| 400 | IllegalParam.VSwitchIds | The parameter VSwitchIds is illegal. | 参数VSwitchIds不合法。 | 诊断 |
| 400 | IllegalParam.ZoneId | The specified ZoneId is illegal. | 传入的可用区非法 | 诊断 |
| 400 | IllegalParam.ZoneMappings | The Specified Parameter ZoneMappings is illegal | 参数中指定的ZoneMappings不合法。 | 诊断 |
| 400 | IllegalParamLength.Tag | The specified length of Tag is invalid. | 指定的Tag长度无效。请查看参数约束，并在修改后重试。 | 诊断 |
| 400 | IncorrectStatus.AggregationRoute | The aggregation route is not in a valid state for the operation. | 聚合路由状态非法。 | 诊断 |
| 400 | IncorrectStatus.Attachment | The resource is not in a valid state for the attachment operation. | 网络连接实例正在处理状态，请稍后再操作。 | 诊断 |
| 400 | IncorrectStatus.Attachment | The status of Attachment is incorrect. | 当前Attachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.AttachmentId | The status of AttachmentId is incorrect. | 当前Attachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.AttachmentOrRouteTable | The resource is not in a valid state for the operation. | 当前attachment或routeTable不处于稳态，无法操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.Cen | The status of Cen is incorrect. | 当前Cen的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.CenInstance | The status of CenInstance is incorrect. | 该转发路由器所属CEN当前状态不支持该操作，请等待CEN处于稳态后重试。 | 诊断 |
| 400 | IncorrectStatus.ConnectPeerIds | Connect Peer statuses are incorrect. | Connect Peer状态不正确。 | 诊断 |
| 400 | IncorrectStatus.EcrResource | The ECR resource is not in a valid state for the attachment operation. | ECR资源状态非法。 | 诊断 |
| 400 | IncorrectStatus.flowlog | This action is not allowed in the current flow log status. | flowlog状态不正确 | 诊断 |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | 当前flowlog的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.MulticastDomain | The status of MulticastDomain is incorrect. | 当前MulticastDomain的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.MulticastDomainId | The status of MulticastDomainId is incorrect. | 当前MulticastDomain的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.MulticastGroup | The status of MulticastGroup is incorrect. | 当前MulticastGroup的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.PeerTrMulticastDomainId | The status of PeerTrMulticastDomainId is incorrect. | 当前PeerTrMulticastDomain的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.ResourceStatus | The resource is not in a valid state for the attachment operation. | 该资源不处于稳态，无法进行该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.RouteMap | Operation Failed. The specified route map is configuring, please try again later. | 当前routeMap的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.RouteTable | RouteTable status is invalid. | 当前操作涉及的路由表状态不是稳态，无法操作。 | 诊断 |
| 400 | IncorrectStatus.Status | RouteTableAssociation status is invalid. | 当前TransitRouterRouteTable或TransitRouterAttachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.Status | The TransitRouterRouteTable or TransitRouterAttachment Status is illegal. | 当前TransitRouterRouteTable或TransitRouterAttachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TrafficMarkingPolicy | The status of TrafficMarkingPolicy is incorrect. | 当前TrafficMarkingPolicy的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TrafficMarkingPolicy | TrafficMarkingPolicy status is invalid. | 当前TrafficMarkingPolicy的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TrafficQosPolicy | The status of TrafficQosPolicy is incorrect. | TrafficQosPolicy当前状态不支持该操作。 | 诊断 |
| 400 | IncorrectStatus.TransitRouter | The status of TransitRouter is incorrect. | 当前TransitRouter的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouter | The status of transitRouter is invalid. | 当前TransitRouter的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouter | TransitRouter status is invalid. | 当前TransitRouter的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouter | The resource is not in a valid state for the operation. | 当前TR的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterAttachment | The status of TransitRouterAttachment is incorrect. | 当前TransitRouterAttachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterAttachment | TransitRouterAttachmentId status is invalid. | 当前TransitRouterAttachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterAttachmentId | TransitRouterAttachmentId status is invalid. | 当前TransitRouterAttachment的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterAttachmentId | The resource is not in a valid state for the attachment operation. | 当前该Attachment不处于稳态，不支持该操作。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterConnectPeer | The resource is not in a valid state for the operation. | 关联的connect peer不处于稳态，无法操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterInstance | The status of TransitRouter is incorrect. | 转发路由器状态不正确。 | 诊断 |
| 400 | IncorrectStatus.TransitRouterRouteTable | TransitRouterRouteTable status is invalid. | 转发路由器路由表状态非法。 | 诊断 |
| 400 | IncorrectStatus.TransitRouteTable | The status of transitRouter route table is invalid. | 当前TransitRouteTable的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouteTable | The transitRouter route table is not in a valid state for the operation. | 当前TransitRouteTable的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TransitRouteTableAggregationCidr | Route table aggregation cidr status is invalid. | 当前该聚合路由状态不可操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.TrFlowlog | Flowlog status for specified TransitRouter is invalid for this operation. | 指定转发路由器的流日志配置状态不合法。 | 诊断 |
| 400 | IncorrectStatus.VbrResource | The resource is not in a valid state for the attachment operation. | 当前vbr资源不处于稳态，无法进行该操作，请等待与当前vbr相关操作结束后重试。 | 诊断 |
| 400 | IncorrectStatus.Vpc | The resource is not in a valid state for the attachment operation. | 当前VPC的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.Vpc | The resource is not in a valid state for the operation. | 当前VPC的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcOrVswitch | The Vpc Or Vswith is not in a valid state for the attachment operation. | 当前vpc或vswitch的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcResource | The resource is not in a valid state for the attachment operation. | 当前VPC资源不处于稳态，无法进行该操作，请等待与当前VPC相关操作结束后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcRouteEntry | The resource is not in a valid state for the attachment operation. | 当前VpcRouteEntry的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcRouteTable | The VPC route table is not in a desired state. | 该操作相关的VPC路由表不处于稳态，无法操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcSwitch | The resource is not in a valid state for the attachment operation. | 当前Vswitch的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | IncorrectStatus.VpcSwitch | Operation is failed because some virtual switch is modifying within the same VPC. | 当前Vswitch的状态不支持该操作，请稍后重试。 | 诊断 |
| 404 | Instance.NotExist | The instance is not exist. | 指定实例不存在。 | 诊断 |
| 400 | InstanceExist | The instance already exists. | 指定实例已经存在。 | 诊断 |
| 400 | InstanceExist.AddTrafficMatchRules | The instance already exists. | 指定实例已经存在。 | 诊断 |
| 400 | InstanceExist.AggregationRoute | This aggregation route is already created. | 聚合路由已经存在。 | 诊断 |
| 400 | InstanceExist.TrafficMatchRules | The instance already exists. | TrafficMatchRules已存在。 | 诊断 |
| 400 | InstanceExist.TransitRouterInstance | The instance already exists. | 当前Region下的TransitRouter实例已经存在，不允许同一个Region下重复创建。 | 诊断 |
| 400 | InstanceExist.TransitRouterRouteEntry | The instance TransitRouterRouteEntry already exists. | 转发路由器路由条目实例已存在。 | 诊断 |
| 400 | InstanceExist.TrUpgradeApplication | The instance already exists. | 已经提交过升级申请，不需要重复提交。 | 诊断 |
| 400 | InstanceNotExist | The instance is not exist. | 指定实例不存在。 | 诊断 |
| 400 | InstanceNotExist.AggregationRoute | The aggregation route is not exist. | 聚合路由不存在。 | 诊断 |
| 400 | InstanceNotExist.AggregationRoute | This aggregation route is not exist. | 聚合路由不存在。 | 诊断 |
| 400 | InstanceNotExist.TransitRouter | The aggregation route is not exist. | transitRouter不存在。 | 诊断 |
| 400 | InstanceNotExist.TransitRouter | The transitRouter is not exist. | transitRouter不存在。 | 诊断 |
| 400 | InstanceNotExist.TransitRouterRouteTable | The transitRouter route table is not exist. | TransitRouteTable不存在。 | 诊断 |
| 400 | InstanceNotExist.TransitRouterRouteTable | The transitRouter route table is not found. | 未找到该企业版转发路由器路由表。 | 诊断 |
| 400 | InstanceNotExist.TransitRouteTable | The transitRouter route table is not exist. | TransitRouteTable不存在。 | 诊断 |
| 400 | InstanceNotExist.TrRouteTableAggregationCidr | The aggregation route does not exist. | 聚合路由不存在。 | 诊断 |
| 400 | InstanceReferenced.ByPrefixlist | The Specified instance is referenced by tr prefix list. | 您当前操作的实例被prefixlist所引用，请先确保您解绑了指向当前实例的prefixlist的关联关系。 | 诊断 |
| 400 | InstanceReferenced.VbrRouteEntry | Operation is failed because there is at least one route entry which next hop is the specified attachment. | vbr中存在路由的下一跳指向该attachment，无法操作。 | 诊断 |
| 400 | InstanceReferenced.VpcRouteEntry | The specified attachment is referenced by vpc route entry. | vpc中存在路由的下一跳指向该attachment，无法操作。 | 诊断 |
| 400 | InstanceStatusNotSupport | The status of instance not support the operation. | 当前实例状态不支持该操作。 | 诊断 |
| 400 | InsufficientIpAddr.vsw | Insufficient available IP addresses in the vSwitch. | 虚拟交换机中的可用IP数目不足 | 诊断 |
| 404 | InvalidAttachmentId.NotFound | The specified AttachmentId is not found. | AttachmentId不存在。 | 诊断 |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | 当前可用区资源不足。 | 诊断 |
| 400 | InvalidCenId.NotFound | CenId is not found. | CEN实例不存在。 | 诊断 |
| 400 | InvalidCenId.NotFound | The specified CenId is not found. | 参数中指定的CenId不存在。 | 诊断 |
| 404 | InvalidChildInstanceId.NotFound | The specified ChildInstanceId is not found. | ChildInstanceId不存在。 | 诊断 |
| 400 | InvalidCidrBlock | The cidr block is invalid. | 参数中指定的cidrBlock不合法。 | 诊断 |
| 400 | InvalidCidrBlock | The transitRouteTableAggregationCidr is invalid. | 参数TransitRouteTableAggregationCidr无效。 | 诊断 |
| 400 | InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | 指定的Cidr已经存在。 | 诊断 |
| 400 | InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | 参数中指定的cidrBlock不合法。 | 诊断 |
| 400 | InvalidCidrBlock.Malformed | The specified CIDR block is not valid. | 参数中指定的cidrBlock不合法。 | 诊断 |
| 400 | InvalidConnectPeerIds.NotFound | The Connect Peer Ids are invalid. | 输入的Connect Peer ID不合法。 | 诊断 |
| 404 | InvalidDeleteTrafficMatchRules.NotFound | The specified DeleteTrafficMatchRules are not found. | 参数中指定的DeleteTrafficMatchRules不存在。 | 诊断 |
| InvalidDescription | The description is invalid. | 该描述信息错误 | 诊断 | |
| 400 | InvalidDescription | Description is invalid. | 描述不合法。 | 诊断 |
| 400 | InvalidDescription | The description is invalid | 描述不合法。 | 诊断 |
| 400 | InvalidDestinationCidrBlock.NotFound | DestinationCidrBlock is not found. | 参数中指定的DestinationCidrBlock不存在。 | 诊断 |
| 400 | InvalidFilterKey | The key in filter is invalid. | The key in filter is invalid. | 诊断 |
| 400 | InvalidFlowlogId.exist | A flow log instance already exists in the current region of the CEN. | 该cen已有flowlog实例 | 诊断 |
| 400 | InvalidFlowlogId.exist | This cenId already has flowlog instance existed. | 当前Cen已经存在flowlog，无法操作。 | 诊断 |
| 400 | InvalidFlowlogId.NotFound | The specified flow log ID does not exist or does not match with the CEN ID. | 指定flowlogId存在或者flowlogId和CenId不匹配 | 诊断 |
| 400 | InvalidFlowlogId.NotFound | The specified flowlog id does not exist or does not match the cen Id. | 参数中指定的flowlog不存在。 | 诊断 |
| 404 | InvalidInstanceId.NotFound | InstanceId is not found. | 参数中指定的实例不存在。 | 诊断 |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | 参数中指定的实例不存在。 | 诊断 |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | 参数中指定的实例类型不存在。 | 诊断 |
| 400 | InvalidIpAddress | The ip address is invalid. | 参数中指定的IP地址不合法。 | 诊断 |
| 400 | InvalidMulticastDomain.NotFound | The specified MulticastDomain is not found. | 参数中指定的MulticastDomain不存在。 | 诊断 |
| 400 | InvalidMulticastDomainId.NotFound | The specified AttachmentId is not found. | 参数中指定的MulticastDomain不存在。 | 诊断 |
| 400 | InvalidMulticastDomainId.NotFound | The specified MulticastDomainId is not found. | 参数中指定的MulticastDomain不存在。 | 诊断 |
| InvalidName | The name is invalid. | 该名称错误 | 诊断 | |
| 400 | InvalidName | Name is invalid. | name不合法。 | 诊断 |
| 400 | InvalidName | The name is invalid | name不合法。 | 诊断 |
| 400 | InvalidOperation | Operation is invalid. | 非法操作。 | 诊断 |
| 409 | InvalidOperation.AssociatedBwpBusinessStatus | The associated CEN bandwidth package is not in a valid business state for the operation. | 当前带宽包状态不支持该操作。 | 诊断 |
| 409 | InvalidOperation.AssociatedBwpStatus | The associated CEN bandwidth package is not in a valid state for the operation. | 当前带宽包状态不支持该操作。 | 诊断 |
| 400 | InvalidOperation.BandwidthLimitNotExist | Operation is invalid because a bandwidth limit not exist. | 带宽包限速不存在。 | 诊断 |
| 400 | InvalidOperation.BondVbrAssociated | Illegal operation due to associated BondVBR. | 操作非法，因为存在关联的BondVBR。 | 诊断 |
| 400 | InvalidOperation.BondVbrExist | The operation failed due to BondVbr exists. | 操作失败因为BondVbr存在。 | 诊断 |
| 400 | InvalidOperation.BwpBusinessStatus | The CBN bandwidth package is not in a valid business state for the operation. | 带宽包不处于稳态，无法操作。 | 诊断 |
| 403 | InvalidOperation.BwpInstanceStatus | The CBN bandwidth package is not in a valid state for the operation. | 当前带宽包状态不支持该操作。 | 诊断 |
| 400 | InvalidOperation.BwpNotAssociated | Operation is invalid because a bandwidth package corresponding to the geographic span is not associated. | 与地域对应的带宽包未关联，无法操作。 | 诊断 |
| 400 | InvalidOperation.CbnBondVbrGatewayRelExist | Operation is invalid because the BondVbr has already been associated with Gateway. | 操作无效，因为BondVbr已与网关关联。 | 诊断 |
| 400 | InvalidOperation.CbnBondVbrStatus | The bond VBR instance is not in an operational steady state. | 绑定的VBR实例未处于可操作的稳态。 | 诊断 |
| 409 | InvalidOperation.CenAlreadyAutoPubilshRouteToInstance | Operation is invalid because other cen has already auto published route to this instance. | 存在其他Cen向该实例传播路由，无法支持当前操作。 | 诊断 |
| 409 | InvalidOperation.CenInstanceStatus | The CEN instance is not in a valid state for the operation. | cen当前状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | InvalidOperation.CenRouteMapExist | Operation is invalid because an route map config exist. | routeMap存在，无法支持当前操作。 | 诊断 |
| 400 | InvalidOperation.CloudRouteNumberInvalid | Cloud route number is invalid | 云服务路由数量不合法。 | 诊断 |
| 403 | InvalidOperation.CloudRouteStatusNotAllow | Operation is prohibited because status of cloud route is invalid. | 当前云服务路由状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | InvalidOperation.CustomRegionDomainRouteEntryExist | Operation is invalid because custom region-domain route entry exist. | 操作失败，请删除自定义云服务路由条目后重试。 | 诊断 |
| 400 | InvalidOperation.DeploymentSetNotShared | The operation is invalid, the deployment set is not shared. | 操作无效，部署集未共享。 | 诊断 |
| 400 | InvalidOperation.DeploymentSetsConflicts | The Operation is invalid, due to the zone of the deployment set must belong to the vpc attachment. | 操作无效，部署集的可用区必须属于vpc连接。 | 诊断 |
| 400 | InvalidOperation.EnhanceProtectionLevel | Your request to enhance CBN protection level cannot be processed. Please contact customer support to continue this operation. | 增强CBN的保护级别的操作不能处理，如果您强烈需要执行此操作，请联系客户支持服务。 | 诊断 |
| 409 | InvalidOperation.Forbidden | Operation is invalid because no grant to attach child-instance across uid. | 未授权 | 诊断 |
| 400 | InvalidOperation.InstanceNotSupportIPv6Route | IPv6 routing has not been enabled for the CEN instance. | 当前cen未开启IPV6路由功能 | 诊断 |
| 400 | InvalidOperation.MedRouteMapActionMustPermit | Operation is invalid because the default med map result must be permit. | 操作无效，med routeMap的策略行为必须是允许。 | 诊断 |
| 400 | InvalidOperation.MedRouteMapExist | Operation is invalid because the default med route map already exist. | 操作无效，因为已存在下一跳目的为该Ecr实例的med routeMap。 | 诊断 |
| 400 | InvalidOperation.MedRouteMapNotAllowedOtherAction | Operation is invalid because the default med not allowed other action. | 配置med策略的routeMap不允许配置其它策略。 | 诊断 |
| 400 | InvalidOperation.MulticastDomainAssociationExist | Operation is invalid because multicast domain associations exist. | 组播域关联存在，无法支持当前操作。 | 诊断 |
| 400 | InvalidOperation.MulticastDomainAssociationNotExist | Operation is invalid because multicast association domain association not exist. | 组播域关联不存在，无法支持当前操作。 | 诊断 |
| 400 | InvalidOperation.MulticastDomainAssociationStatus | Operation is invalid, due to multicast domain association not Active. | 当前组播域关联状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | InvalidOperation.MulticastDomainInGroup | Operation is invalid because multicast domain has registered as multicast group member. | 组播域已作为组播组成员，不支持当前操作。 | 诊断 |
| 400 | InvalidOperation.MulticastDomainStatus | Operation is invalid, due to multicast domain not Active. | 当前组播域状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | InvalidOperation.MulticastGroupExist | Operation is invalid because multicast groups exist. | 组播组存在，无法支持当前操作。 | 诊断 |
| 400 | InvalidOperation.NetworkInterfaceNotExist | Operation is invalid bacause network interface not exist. | NetworkInterface不存在。 | 诊断 |
| 400 | InvalidOperation.NoEffictiveAction | No effective action be configured. | 没有有效的Action。 | 诊断 |
| 400 | InvalidOperation.Notfoundroute | You cannot query the system routing information of the specified instance. | 无法查询用户输入实例中的系统路由信息 | 诊断 |
| 400 | InvalidOperation.NotFoundRoute | The specified route does not exist. | 路由不存在。 | 诊断 |
| 400 | InvalidOperation.NTRNetworkInterfaceNotSupport | Operation is invalid, due to ntr eni not support. | 转发路由器的Eni不允许加入组播组中。 | 诊断 |
| 400 | InvalidOperation.OnlyOneRegionSupportIpv6 | Peer Attachment is only allowed when both regions support IPv6 or do not support IPv6 at all. | 只有当两端地域均支持或均不支持IPv6时才可以创建跨地域连接。 | 诊断 |
| 400 | InvalidOperation.OrderParameterIllegal | The order parameters are abnormal, please check whether the order parameters are correct and whether they conflict with existing orders. | 下单参数异常，请检查下单参数是否正确以及是否与已有订单冲突等。 | 诊断 |
| 400 | InvalidOperation.PeerMulticastDomainSource | Operation is invalid because peer multicast domain can not be group source. | 另一个地域的组播域不能作为组播源。 | 诊断 |
| 400 | InvalidOperation.PrependAsPathWithInvalidSourceInstanceIds | When using PrependAsPath in the RegionIn direction, SourceInstanceIds must be local instance ids. | 在入地域网关方向配置附加AS Path时，源实例ID必须是本地域实例。 | 诊断 |
| 400 | InvalidOperation.PrependAsPathWithInvalidSourceRegionId | When using PrependAsPath in the RegionIn direction, SourceRegionId must be local region ID. | 在入地域网关方向配置附加AS Path时，源地域ID必须是本地域Region ID。 | 诊断 |
| 409 | InvalidOperation.PrivatezoneRouteExisted | Privatezone routes already existed. | Private zone路由已存在。 | 诊断 |
| 403 | InvalidOperation.PvtzNotAssociatedWithVpc | Privatezone not associated with the specified vpc. | Privatezone没有绑定指定的vpc。 | 诊断 |
| 400 | InvalidOperation.RegionNotSupport | The operation is not supported in this region. | 当前地域不支持该操作。 | 诊断 |
| 400 | InvalidOperation.RegionNotSupport | The Operation is not Support in this region. | 当前地域不支持该操作。 | 诊断 |
| 400 | InvalidOperation.SaleValidateFailed | Sales expression validation system error. | 销售表达式校验系统错误。 | 诊断 |
| 400 | InvalidOperation.TransitRouterNotExist | Operation is invalid because the transit router not exist. | 转发路由器不存在。 | 诊断 |
| 400 | InvalidOperation.TrCapacityReservationReservation | Operation is invalid, due to the lack of permission for transit router capacity reservation. | 操作无效，因为缺乏中转路由器容量预留的权限。 | 诊断 |
| 409 | InvalidOperation.UnmatchRouteInVpcRegion | Operation Failed.Unmatch route in vpc region. | vpc地域中的路由不匹配。 | 诊断 |
| 400 | InvalidOperation.UnsupportChargeType | The charge type is not supported by this operation. | 当前付费类型不支持该操作。 | 诊断 |
| 400 | InvalidOperation.UnsupportFilter | The specified FeatureFilter is not supported by this operation. | 参数中指定的FeatureFilter不合法。 | 诊断 |
| 400 | InvalidOperation.UnsupportFilterValue | The specified FeatureFilter Value is not supported by this operation. | 参数中指定的FeatureFilter Value不合法。 | 诊断 |
| 400 | InvalidOperation.UnsupportnexthopType | The specified next hop type is not supported by this operation. | 操作不支持该nexthopType。 | 诊断 |
| 400 | InvalidOperation.UnsupportnexthopType | The nexthop type is unsupported | 当前下一跳类型不支持该操作。 | 诊断 |
| 400 | InvalidOperation.UnsupportRouteTableType | The route table type is unsupported | 当前RouteTable类型不支持该操作。 | 诊断 |
| 400 | InvalidOperation.UpgradeBwpBandwidth | The operation is invalid because the upgrade is equal or less than the original bandwidth. | 操作非法，带宽包升级的带宽值非法 | 诊断 |
| 400 | InvalidOperation.VbrAttachedToEcr | VBR has alreay attached to ECR. | VBR已经绑定了ECR。 | 诊断 |
| InvalidOperation.VbrCenAttachmentStatus | The VBR instance to CEN attachment is not in a valid state for the operation. | 云企业网操作边界路由器正在处理状态，请稍后重试 | 诊断 | |
| 400 | InvalidOperation.VbrExistInBondVbr | The operation is invalid because there are one or more VBRs in the BondVBR. | 操作无效，因为BondVBR中存在一个或多个VBR。 | 诊断 |
| 400 | InvalidOperation.VpcAutoRoutesPublishInOtherCEN | The specified VPC already has its routes synchronized with another CEN instance. | 当前VPC已经在其他CEN中开启了路由自动同步，无法支持该操作。 | 诊断 |
| 409 | InvalidOperation.VpcNotAttachedToCen | Vpc not attached to cen. | 该vpc没有绑定到cen中。 | 诊断 |
| 400 | InvalidOperation.VpnAssociated | The operation is not supported because the VPC is associated with VPN. | 当前VPC与VPN绑定，无法打开路由自动同步功能。 | 诊断 |
| 400 | InvalidOperation.VpnNetworkTypeInvalid | The network type of child-instance is invalid. | 该实例的network type不合法。 | 诊断 |
| 400 | InvalidParam.DestinationInstanceIds | When using "PrependAsPath" in the "RegionOut", "DestinationInstanceIds" must be local region instances. | 在"RegionOut"配置中使用"PrependAsPath"选项时，DestinationInstanceIds 目标实例应位于本地域内。 | 诊断 |
| 400 | InvalidParam.RouteFilter | The parameter RouteFilter is invalid. | 参数中指定的RoutFilter不合法。 | 诊断 |
| 400 | InvalidParam.RoutFilterKey | The specified Key of RouteFilter is invalid. | 参数中指定的RoutFilterKey不合法。 | 诊断 |
| InvalidParameter | The parameter is invalid. | 该参数错误 | 诊断 | |
| InvalidParameter | The specified parameter "Filter" is invalid. | 无效的Filter值 | 诊断 | |
| InvalidParameter | The specified parameter "ResourceUid" is invalid. | 无效的 ResourceUid 值 | 诊断 | |
| InvalidParameter | The specified parameter "ChildInstanceOwnerUid" is invalid. | 无效的 ChildInstanceOwnerUid 值 | 诊断 | |
| InvalidParameter | The specified parameter "BandwidthLimit" is invalid. | 无效的BandwidthLimit值 | 诊断 | |
| InvalidParameter | The specified parameter "PageSize" is invalid. | 无效的PageSize值 | 诊断 | |
| InvalidParameter | The specified parameter "PageNumber" is invalid. | 无效的PageNumber值 | 诊断 | |
| 400 | InvalidParameter | Invalid parameter. | 参数不合法。 | 诊断 |
| 400 | InvalidParameter.ApplianceModeSupport | The specified parameter ApplianceModeSupport is invalid. | 输入的参数ApplianceModeSupport不合法。 | 诊断 |
| 400 | InvalidParameter.BondVbrId | The parameter BondVbrId is invalid. | 参数中指定的BondVbrId不合法。 | 诊断 |
| 400 | InvalidParameter.Day | The Parameter Day is invalid. | 参数中指定的Day不合法。 | 诊断 |
| 400 | InvalidParameter.FlowLogId | The specified flowlog id does not exist or does not match the cen Id. | 参数中指定的FlowLogId不合法。 | 诊断 |
| 400 | InvalidParameter.FlowLogVersion | Flowlog version is invalid. | 指定的flowlog版本不合法。 | 诊断 |
| 400 | InvalidParameter.Interval | Interval is invalid. | 指定的采样频率不合法。 | 诊断 |
| 400 | InvalidParameter.Ipv6Support | The specified parameter Ipv6Support is invalid. | 输入的参数Ipv6Support不合法。 | 诊断 |
| 400 | InvalidParameter.LogFormatString | LogFormatString is invalid. | 指定的日志格式不合法。 | 诊断 |
| 400 | InvalidParameter.LogStoreName | Specified LogStore name is invalid. | Logstore名称不合法。 | 诊断 |
| 400 | InvalidParameter.LogStoreNameConflict | The parameter LogStoreName is conflict. | 配置的LogStore名称冲突，请修改后重试。 | 诊断 |
| 400 | InvalidParameter.MaxResults | The specified MaxResults is invalid. | 参数中指定的MaxResults不合法。 | 诊断 |
| 400 | InvalidParameter.MedRouteMapDestInstanceIds | Param DestInstanceIds must be ecr instance id. | med routeMap的目的实例列表必须是ecr实例。 | 诊断 |
| 400 | InvalidParameter.MedRouteMapDestInstanceType | Param DestChildInstanceTypes must be ecr. | med routeMap的目的实例类型必须是ECR。 | 诊断 |
| 400 | InvalidParameter.ProjectName | Project name is invalid or does not belong to specified region. | Project名称不合法或与不属于指定的region。 | 诊断 |
| 400 | InvalidParameter.ProjectName | ProjectName is invalid. | Project名称不合法。 | 诊断 |
| 400 | InvalidParameter.RegionId | The specified Region Id is invalid. | 参数中指定的RegionId不合法。 | 诊断 |
| 400 | InvalidParameter.TagKeyOrAll | The specified parameter TagKey or All is invalid. | 参数TagKey或All不合法。 | 诊断 |
| 400 | InvalidParameter.TransitRouteTableAggregationScope | TransitRouteTableAggregationScope is invalid. | 聚合路由的传播范围不合法。 | 诊断 |
| 400 | InvalidParameter.TransitRouteTableAggregationScopeList | TransitRouteTableAggregationScopeList is invalid. | 聚合路由的传播范围列表参数设置不合法。 | 诊断 |
| 400 | InvalidParameterCombination.TransitRouter | Region ID is required if no TransitRouterId or CenId specified. | 至少需要传入Region，TransitRouterId 或CenId三者中的一个。 | 诊断 |
| 400 | InvalidParamSize.TrafficQosQueues | The queue size included in the traffic QoS policy exceeds the limit. | 流量调度策略中包含的队列大小超出限制。 | 诊断 |
| 400 | InvalidPeerTransitRouterId.NotFound | The specified PeerTransitRouterId is not found. | 参数中指定的PeerTransitRouterId不存在。 | 诊断 |
| 400 | InvalidPeerTrMulticastDomainId.NotFound | The specified PeerTrMulticastDomainId is not found. | 参数中指定的PeerTrMulticastDomainId不存在。 | 诊断 |
| 400 | InvalidRouteEntry.NotFound | Route entry not exists. | 路由表项不存在。 | 诊断 |
| 404 | InvalidRouteTableId.NotFound | The specified RouteTableId is not found. | RouteTableId不存在。 | 诊断 |
| 400 | InvalidStatus.HealthCheck | Can not modify, please delete health check config first. | 不能修改，请先删除健康检查配置。 | 诊断 |
| 400 | InvalidStatus.Prefixlist | Prefixlist is not in a operate status. | 当前Prefixlist状态不支持该操作。 | 诊断 |
| 400 | InvalidStatus.PrefixlistAssociation | The prefix list association is not in a valid state for the operation. | 当前PrefixlistAssociation状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | InvalidStatus.Resource | The status of the specified resource is invalid. The resource cannot be renewed. | 资源状态非法，无法续费。 | 诊断 |
| 400 | InvalidStatus.ResourceStatus | The resource is not in a valid state for the attachment operation. | 当前资源状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | InvalidStatus.VpcAttachedFullModeCen | The VPC has been attached to another CEN instance whose protection level is FULL. | 参数中指定的vpc加载到另一个protection level为FULL的cen中，无法再加载到其他cen中。 | 诊断 |
| 400 | InvalidTagKey | The tag keys are not valid. | 标签的Key值不合法。 | 诊断 |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | Tag scope不合法。 | 诊断 |
| 400 | InvalidTagValue | The tag values are not valid. | Tag value不合法。 | 诊断 |
| 400 | InvalidTrafficMarkingPolicyId.NotFound | The specified TrafficMarkingPolicyId is not found. | 参数中指定的TrafficMarkingPolicyId不存在。 | 诊断 |
| 400 | InvalidTrafficMarkingPolicyId.NotFound | Operation is failed because traffic marking policy id is not found. | 参数中指定的TrafficMarkingPolicyId不存在。 | 诊断 |
| 400 | InvalidTrafficMarkingPolicyId.NotFound | TrafficMarkingPolicyId is not found. | 参数中指定的TrafficMarkingPolicyId不存在。 | 诊断 |
| 400 | InvalidTrafficMatchRuleId.NotFound | TrafficMatchRuleId is not found. | 参数中指定的TrafficMatchRuleId不存在。 | 诊断 |
| 404 | InvalidTrafficQosPolicyId.NotFound | The specified TrafficQosPolicyId is not found. | 参数中指定的TrafficQosPolicyId不存在。 | 诊断 |
| 400 | InvalidTrafficQosQueueId.NotFound | The specified TrafficQosQueueId is not found. | 参数中指定的TrafficQosQueueId不存在。 | 诊断 |
| 400 | InvalidTrafficQosQueueId.NotFound | The instance of TrafficQosQueueId is not found. | 未找到流量调度策略ID指定的策略实例。 | 诊断 |
| 404 | InvalidTransitQosId.NotFound | The specified TrafficQosPolicyId is not found. | 参数中指定的TrafficQosPolicyId不合法。 | 诊断 |
| 400 | InvalidTransitRouterAttachmentId.NotFound | TransitRouterAttachmentId is not found. | 网络连接实例ID不存在。 | 诊断 |
| 400 | InvalidTransitRouterAttachmentId.NotFound | The TransitRouterAttachmentId is not found. | 参数中指定的TransitRouterAttachmentId不存在。 | 诊断 |
| 400 | InvalidTransitRouterId.NotFound | TransitRouterId is not found. | 转发路由实例ID不存在。 | 诊断 |
| 400 | InvalidTransitRouterId.NotFound | The specified TransitRouterId is not found. | 指定的转发路由器不存在 | 诊断 |
| 400 | InvalidTransitRouterId.NotFound | The specified TransitRouterId is not found. | 参数中指定的TransitRouterId不存在。 | 诊断 |
| 400 | InvalidTransitRouterId.NotFound | TransitRouterId is not found | 参数中指定的TransitRouterId不存在。 | 诊断 |
| 400 | InvalidTransitRouterInstance.NotFound | The Transit Router instance is not found. | 转发路由器实例不存在。 | 诊断 |
| 400 | InvalidTransitRouterInstanceId.NotFound | The specified TransitRouterInstanceId is not found. | TransitRouter 实例不存在 | 诊断 |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | 当前转发路由器模式不支持。 | 诊断 |
| 400 | InvalidTransitRouterMulticastDomainId.NotFound | The specified TransitRouterMulticastDomainId is not found. | 参数中指定的TransitRouterMulticastDomainId不存在。 | 诊断 |
| 400 | InvalidTransitRouterRouteEntryId.NotFound | TransitRouterRouteEntryId is not found. | 转发路由条目实例ID不存在 | 诊断 |
| 400 | InvalidTransitRouterRouteEntryNextHopId.NotFound | TransitRouterRouteEntryNextHopId is not found | TransitRouterRouteEntryNextHopId不存在。 | 诊断 |
| 400 | InvalidTransitRouterRouteTableId.NotFound | TransitRouterRouteTableId is not found. | 转发路由器路由表实例ID未找到。 | 诊断 |
| 404 | InvalidTrAttachmentId.NotFound | The specified AttachmentId is not found. | 参数中指定的AttachmentId不存在。 | 诊断 |
| 400 | InvalidValue.PrefixlistCidr | Invalid cidr exist in the specified prefixlist. | prefixlist中存在不合法的cidr。 | 诊断 |
| 400 | InvalidVpcId.NotFound | The specified VpcId is not found. | 参数中指定的VpcId不存在。 | 诊断 |
| 400 | InvalidVpcId.NotValid | The specified Vpc is invalid. | 指定的vpcId无效。 | 诊断 |
| 400 | InvalidVpnId.NotFound | The specified vpn connection instance id does not exist. | 指定的VPN连接不存在，请您检查该VPN连接ID是否正确。 | 诊断 |
| 404 | InvalidVSwitchId.NotFound | The specified VSwitchId is not found. | 指定的VSwitchId不存在。 | 诊断 |
| 404 | InvalidVSwitchId.NotFound | VSwitch not exist. | VSwitchId不存在。 | 诊断 |
| 400 | InvalidVSwitchId.NotFound | VSwitchId is not found. | VSwitchId不存在。 | 诊断 |
| 400 | INVALID_OPERATION_RESOURCE_NOT_SUPPORT_APPLIANCE_MODE | Only VPC attachment support appliance mode. | 只有专有网络连接支持网元导流模式。 | 诊断 |
| 400 | Invid.Parameter | When using GatewayRegionId, SourceRegionId must not be null | GatewayRegionId, SourceRegionId不允许为空。 | 诊断 |
| 400 | Invid.Parameter | DestinationInstanceId is invalid. | DestinationInstanceId不合法。 | 诊断 |
| 400 | Invid.Parameter | GatewayRegionId is invalid | GatewayRegionId不合法。 | 诊断 |
| 400 | Invid.Parameter | SourceInstanceId is invalid. | SourceInstanceId不合法。 | 诊断 |
| 400 | Invid.Parameter | TransitRouter not exist. | TransitRouter不存在。 | 诊断 |
| 400 | Invid.Parameter | When using GatewayRegionId, GatewayZoneId must not be null | GatewayRegionId, GatewayZoneId不允许为空。 | 诊断 |
| 400 | Invid.Parameter | When using GatewayRegionId, SourceRegionId must not be the same with tr region id | GatewayRegionId和SourceRegionId不能在同一个地域。 | 诊断 |
| 409 | IpAddressExist | Specified IpAddress is already exist. | IpAddress已经存在。 | 诊断 |
| 400 | MissingParam | The parameter %s is missing. | 参数缺失。 | 诊断 |
| 400 | MissingParam.Bandwidth | The parameter Bandwidth is mandatory. | 带宽值参数是必需的。 | 诊断 |
| 400 | MissingParam.CbnBandwidthPackageId | More than one applicable CEN bandwidth package exists. | 合适的Cen带宽包多于一个 | 诊断 |
| 400 | MissingParam.CbnBandwidthPackageId | There are more than one suitable cen bandwidth package | 缺少参数CbnBandwidthPackageId。 | 诊断 |
| 400 | MissingParam.CenIdOrRegionId | Either CenId or RegionId must be specified. | CenId或者RegionId是必选参数。 | 诊断 |
| 400 | MissingParam.ChildInstanceRouteTableId | The parameter TransitRouterAttachmentId is Missing. | 缺少参数ChildInstanceRouteTableId。 | 诊断 |
| 400 | MissingParam.NetworkType | NetworkType is required. | NetworkType为必填参数。 | 诊断 |
| 400 | MissingParam.RegionId | The parameter RegionId is mandatory. | regionId是必传参数，请检查您的传参。 | 诊断 |
| 400 | MissingParam.RemainBandwidthPercent | RemainBandwidthPercent is missing. | 缺少保障带宽百分比。 | 诊断 |
| 400 | MissingParam.TrafficMatchRules | The parameter TrafficMatchRules is empty. | 传入的流分类规则为空。 | 诊断 |
| 400 | MissingParam.TransitRegionMappings | TransitRegionMappings parameter is missing in the parameter. | 参数中TransitRegionMappings参数缺失。 | 诊断 |
| 400 | MissingParam.TransitRouterAttachmentId | The parameter TransitRouterAttachmentId is Missing. | 缺少参数TransitRouterAttachmentId。 | 诊断 |
| 400 | MissingParam.TransitRouterAttachments | The parameter TransitRouterAttachments is mandatory. | 缺少TransitRouterAttachments参数。 | 诊断 |
| 400 | MissingParam.TransitRouterId | The parameter TransitrouterId is mandatory. | 缺少参数TransitRouterId。 | 诊断 |
| 400 | MissingParam.TransitRouterIdOrTrafficMarkingPolicyId | Either TransitRouterId or TrafficMarkingPolicyId must be specified. | 缺少参数TransitRouterId或TrafficMarkingPolicyId。 | 诊断 |
| 400 | MissingParam.TransitRouterIdOrTrafficQosPolicyId | Either TransitRouterId or TrafficQosPolicyId must be specified. | 缺少参数TransitRouterId或TrafficQosPolicyId。 | 诊断 |
| 400 | MissingParam.TransitRouterIdOrTransitRouterRouteTables | Either TransitRouterId or TransitRouterRouteTables must be specified. | 参数错误，至少需要设置参数TransitRouterId和TransitRouterRouteTables中的一个。 | 诊断 |
| 400 | MissingParam.TransitRouterRouteEntryNextHopId | The parameter TransitRouterRouteEntryNextHopId is mandatory | 缺少参数TransitRouterRouteEntryNextHopId。 | 诊断 |
| 400 | MissingParam.transitRouterRouteTableId | Missing the parameter transitRouter route table id. | 缺少参数transitRouterRouteTableId。 | 诊断 |
| 400 | MissingParam.TransitRouterRouteTableId | The parameter TransitRouterRouteTableId is mandatory. | 缺少参数TransitRouterRouteTableId。 | 诊断 |
| 400 | MissingParam.TransitRouteTableAggregationScope | The parameter TransitRouteTableAggregationScope is mandatory. | 缺失聚合路由的传播范围参数。 | 诊断 |
| 400 | MissingParam.VSwitchIds | The parameter VSwitchIds is mandatory. | 缺少参数VSwitchIds。 | 诊断 |
| MissingParameter | The input parameter "LocalRegionId" that is mandatory for processing this request is not supplied. | 缺少 LocalRegionId 字段 | 诊断 | |
| MissingParameter | The input parameter "HealthCheckTargetIp" that is mandatory for processing this request is not supplied. | 缺少 HealthCheckTargetIp 字段 | 诊断 | |
| MissingParameter | The input parameter "BandwidthLimit" that is mandatory for processing this request is not supplied. | 缺少 BandwidthLimit 字段 | 诊断 | |
| MissingParameter | The input parameter "OppositeRegionId" that is mandatory for processing this request is not supplied. | 缺少 OppositeRegionId 字段 | 诊断 | |
| MissingParameter | The input parameter "GeographicRegionId" that is mandatory for processing this request is not supplied. | 缺少 GeographicRegionId 字段 | 诊断 | |
| MissingParameter | The input parameter "ResourceBid" that is mandatory for processing this request is not supplied. | 缺少 ResourceBid 字段 | 诊断 | |
| MissingParameter | The input parameter "VbrInstanceRegionId" that is mandatory for processing this request is not supplied. | 缺少 VbrInstanceRegionId 字段 | 诊断 | |
| MissingParameter | The input parameter "CenRegionId" that is mandatory for processing this request is not supplied. | 缺少 CenRegionId 字段 | 诊断 | |
| MissingParameter | The input parameter "HealthCheckSourceIp" that is mandatory for processing this request is not supplied. | 缺少 HealthCheckSourceIp 字段 | 诊断 | |
| MissingParameter | The input parameter "VbrInstanceId" that is mandatory for processing this request is not supplied. | 缺少 VbrInstanceId 字段 | 诊断 | |
| MissingParameter | The input parameter "Bandwidth" that is mandatory for processing this request is not supplied. | 缺少参数 | 诊断 | |
| MissingParameter | The input parameter "GeographicRegionBId" that is mandatory for processing this request is not supplied. | 缺少 GeographicRegionBId 字段 | 诊断 | |
| MissingParameter | The input parameter "CenBandwidthPackageId" that is mandatory for processing this request is not supplied. | 缺少 CenBandwidthPackageId 字段 | 诊断 | |
| MissingParameter | The input parameter "GeographicRegionAId" that is mandatory for processing this request is not supplied. | 缺少 GeographicRegionAId 字段 | 诊断 | |
| MissingParameter | The input parameter "ResourceUid" that is mandatory for processing this request is not supplied. | 缺少 ResourceUid 字段 | 诊断 | |
| MissingParameter | The input parameter "ChildInstanceRouteTableId" that is mandatory for processing this request is not supplied. | 缺少 ChildInstanceRouteTableId 字段 | 诊断 | |
| MissingParameter | The input parameter "ChildInstanceType" that is mandatory for processing this request is not supplied. | 缺少 ChildInstanceType 字段 | 诊断 | |
| MissingParameter | The input parameter "CenId" that is mandatory for processing this request is not supplied. | 缺少 CenId 字段 | 诊断 | |
| MissingParameter | The input parameter "ChildInstanceRegionId" that is mandatory for processing this request is not supplied. | 缺少 ChildInstanceRegionId 字段 | 诊断 | |
| MissingParameter | The input parameter "ChildInstanceId" that is mandatory for processing this request is not supplied. | 缺少 ChildInstanceId 字段 | 诊断 | |
| 400 | MissingParameter | Missing parameter. | 缺少参数。 | 诊断 |
| 400 | MissingParameter.MinimumTransitRouterCapacity | The parameter MinimumTransitRouterCapacity is mandatory. | 请求参数MinimumTransitRouterCapacity缺失。 | 诊断 |
| 400 | MissingParameter.OwnerIdOrOwnerAccount | Either OwnerAccount or OwnerId must be specified. | 缺少资源的拥有者ID | 诊断 |
| 400 | MissingParameter.OwnerIdOrOwnerAccount | The input parameter OwnerAccount or OwnerId that is mandatory for processing this request is not supplied | 缺少参数OwnerId或OwnerAccount。 | 诊断 |
| 400 | MissingParameter.RegionId | Missing RegionId parameter. | RegionId参数缺失。 | 诊断 |
| 400 | MissingParameter.ScopeListOrScope | The input parameter TransitRouteTableAggregationScopeList or TransitRouteTableAggregationScope that is mandatory for processing this request is not supplied. | TransitRouteTableAggregationScopeList、TransitRouteTableAggregationScope至少填写一个，推荐使用TransitRouteTableAggregationScopeList。 | 诊断 |
| 400 | MissingParameter.TagKey | TagKey must be specified. | TagKey是必填的参数。 | 诊断 |
| 400 | MissingParameter.TagValue | The specified parameter TagValue is missing | 缺少参数TagValue。 | 诊断 |
| 400 | MissingParameter.TrafficMarkingPolicyId | The parameter TrafficMarkingPolicyId is mandatory. | 请求参数TrafficMarkingPolicyId缺失。 | 诊断 |
| 400 | MissingParameter.TrafficMatchRuleId | The parameter TrafficMatchRuleId is mandatory. | 请求参数TrafficMatchRuleId缺失。 | 诊断 |
| 400 | MissingParameter.TransitRouterInstanceId | The parameter TransitRouterInstanceId is mandatory. | 请求参数TransitRouterInstanceId缺失。 | 诊断 |
| 400 | MultipleFound.PrefixlistAssociation | multiple same prefix association record found. | 系统异常，系统中存在多个相同的记录。 | 诊断 |
| 400 | NameDescriptionNull | The name or description is empty | name或description不允许为空。 | 诊断 |
| 400 | NeedOpenProduct | The user has not activated the transit router service. | 用户没有开通转发路由器服务。 | 诊断 |
| 400 | NoPermission.AliyunServiceRoleForCEN | You are not authorized to create the service linked role. Role Name: AliyunServiceRoleForCEN. Service Name: cen.aliyuncs.com. Make sure that the user has been granted the ram:CreateServiceLinkedRole permission. | 您没有权限创建服务关联角色，角色名：AliyunServiceRoleForCEN，服务名：cen.aliyuncs.com。请确保已授予当前用户ram:CreateServiceLinkedRole权限。 | 诊断 |
| 400 | NoPermission.AliyunServiceRoleForCEN | No permission to open AliyunServiceRole for CEN. | 未授权。 | 诊断 |
| 403 | NoPermission.AliyunServiceRoleForTRFlowLog | You are not authorized to create service linked role AliyunServiceRoleForTRFlowLog. | 无权限创建服务关联角色AliyunServiceRoleForTRFlowLog。 | 诊断 |
| 400 | NoPermission.AliyunServiceRolePolicyForCEN | You are not authorized to create the service linked role. Role Name: AliyunServiceRolePolicyForCEN. Service Name: cen.aliyuncs.com. Make sure that the user has been granted the ram:CreateServiceLinkedRole permission. | 您没有权限创建服务关联角色，角色名：AliyunServiceRolePolicyForCEN，服务名：cen.aliyuncs.com。请确保已授予当前用户ram:CreateServiceLinkedRole权限。 | 诊断 |
| 400 | NotSupport.AttachmentRoute | Not support such attachment route. | 不支持这种连接路由。 | 诊断 |
| 400 | NotSupport.TrType | The basic tr type is not support for this operation. | 基础版转发路由器不支持该操作。 | 诊断 |
| 400 | Operation.Failed | Spec of the specified bandwidth package is not changed, please check again. | 带宽包spec未修改。 | 诊断 |
| 400 | OperationDenied.AttachmentExist | Operation is not allowed because the specified instance has already been attached to CEN. | 请先将该实例从云企业网中卸载再进行取消跨账号授权操作。 | 诊断 |
| 400 | OperationDenied.ECSPrefixList | Associate ECS PrefixList is not supported. | 不支持关联ECS前缀列表。 | 诊断 |
| 400 | OperationDenied.RouteEntryOnEni | Operation is failed because there is at least one route entry which next hop is the specified eni. | 存在路由指向eni，无法支持该操作。 | 诊断 |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because of RouteTableTypeNotPermitted. | 路由表类型不支持该操作。 | 诊断 |
| 400 | OperationDenied.SystemPrefixList | SystemPrefixList can not be operated. | SystemPrefixList不允许操作。 | 诊断 |
| 400 | OperationFailed.AggregationRouteExist | Operation is invalid because transit router aggregation route exists. | TR存在聚合路由配置，请删除后重试。 | 诊断 |
| 400 | OperationFailed.AggregationRouteExist | Operation failed because TransitRouterRouteAggregation exists. | 删除操作失败，因为包含聚合路由。 | 诊断 |
| 400 | OperationFailed.AllocateCidrFailed | Operation failed because vpn allocate cidr failed. | vpn申请cidr失败。 | 诊断 |
| 400 | OperationFailed.AllocateTrCidrBlock | Operation failed because allocate cidr failed. | 申请分配转发路由器cidr失败。 | 诊断 |
| 400 | OperationFailed.AttachmentReferencedVpcRouteEntryExisted | Operation is failed because there is at least one route entry which next hop is the specified attachment. | 存在路由指向attachment，无法支持该操作。 | 诊断 |
| 400 | OperationFailed.BandwidthLimitExist | Operation is invalid because a bandwidth limit exist. | 当前TR还存在已经配置的跨地域带宽，请删除所有跨地域带宽后再删除TR。 | 诊断 |
| 400 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | 您的基本信息尚未完成，请先完成信息填写。 | 诊断 |
| 400 | OperationFailed.BasicTrNotSupport | Operation failed because the Basic TransitRouter does not support RouteTable | 基础版转发路由器不支持该操作。 | 诊断 |
| 400 | OperationFailed.CCNAttached | Can not delete transit router because CCN still attached. | 存在绑定的CCN，不允许删除转发路由器。 | 诊断 |
| 400 | OperationFailed.CCNTrNotSupport | Operation failed because the CCN transit router does not support route table. | CCN地域的转发路由器不支持创建路由表。 | 诊断 |
| 400 | OperationFailed.CenReferencedVpcRouteEntryExisted | Operation is failed because there is at least one route entry which next hop is the specified cen. | 存在路由指向CEN，无法支持该操作。 | 诊断 |
| 400 | OperationFailed.CidrBlockAllocated | Cidr blocks are allocated from the cidr, which should be released first. | Cidr使用中，请先释放相应资源。 | 诊断 |
| 400 | OperationFailed.CidrConflict | Operation is invalid because the cidr conflict. | cidr冲突。 | 诊断 |
| 400 | OperationFailed.CidrNotExist | cidr is not exist. | 参数中指定的cidr不存在。 | 诊断 |
| 400 | OperationFailed.CloudRouteExist | Cloud service routes exist. | 存在云服务路由，无法操作请删除后重试。 | 诊断 |
| 400 | OperationFailed.CloudRouteExist | Operation is invalid because cloud route exists. | 当前TR存在云服务路由配置，请先访问云服务配置页面删除该TR上配置的所有云服务路由。 | 诊断 |
| 400 | OperationFailed.ConcurrentOperation | The operation failed caused by concurrent operation. | 并发操作导致失败，您的操作太频繁，请稍后重试。 | 诊断 |
| 400 | OperationFailed.ConnectPeerExist | Operation is invalid because connect peer exists. | 存在connect peer，无法支持该操作，请删除后重试。 | 诊断 |
| 400 | OperationFailed.ContainsForbiddenLabel | You cannot place the order because orders are prohibited by a label. | 存在禁止下单的标签，请联系您的分销商处理。 | 诊断 |
| 400 | OperationFailed.CreateRouteEntryWithCCNAttachment | Operation failed because routeEntry to CCN attachment is not supported. | 操作失败因为创建下一个跳为CCN类型的连接不被允许。 | 诊断 |
| 400 | OperationFailed.CreateRouteEntryWithCCNAttachment | Operation failed because Create RouteEntry to CCN Attachment does not support. | 不支持创建指向CCN attachment的路由。 | 诊断 |
| 400 | OperationFailed.CreateRouteEntryWithConnectAttachment | Operation failed because Create RouteEntry to connect Attachment does not support. | 不支持创建指向connect attachment的路由。 | 诊断 |
| 400 | OperationFailed.CreateRouteEntryWithSameDestinationCidrBlock | Operation failed because Create RouteEntry with same destination cidrblock does not support. | 不允许创建目的网段相同的路由表项。 | 诊断 |
| 400 | OperationFailed.CreateTransitRouterConnectAttachment | Operation failed because transit router not support multicast. | 转发路由器不支持组播，无法创建ConnectAttachment。 | 诊断 |
| 400 | OperationFailed.CreateTransitRouterRouteEntryWithVPCAttachment | The specified VPC Attachment has not enable IPv6. | 指定的VPC Attachment未使能IPv6. | 诊断 |
| 400 | OperationFailed.CreateTransitRouterRouteEntryWithVPNAttachment | Create RouteEntry to VPN Attachment does not support IPv6. | 不支持创建指向VPN Attachment的IPv6路由条目，请确认后再进行操作。 | 诊断 |
| 400 | OperationFailed.DeleteCenWithCustomRouteTable | Operation failed because you are not allowed to delete the CEN with the custom transit router route table. | 禁止删除云企业网实例，因为云企业网实例还有自定义路由表。 | 诊断 |
| 400 | OperationFailed.DeleteCenWithRouteEntry | Operation failed because you are not allowed to delete the CEN with the transit router route entry. | 禁止删除云企业网实例，因为云企业网实例中还有自定义路由条目。 | 诊断 |
| 400 | OperationFailed.DeleteRouteTableWithAssociation | Operation failed because you are not allowed to delete TransitRouterRouteTable with association | 存在关联转发，请解绑后再删除路由表。 | 诊断 |
| 400 | OperationFailed.DeleteRouteTableWithPropagation | Operation failed because you are not allowed to delete transit router route table with propagation | 存在路由学习，请解绑后再删除路由表。 | 诊断 |
| 400 | OperationFailed.DeleteRouteTableWithRouteAggregation | Operation is invalid because delete route table with route aggregation. | 该路由表上存在路由聚合配置，请删除后再删除路由表。 | 诊断 |
| 400 | OperationFailed.DeleteRouteTableWithRouteEntry | Operation failed because you are not allowed to delete transit touter route table with route entry | 存在路由表项，请解绑后再删除路由表。 | 诊断 |
| 400 | OperationFailed.DeleteSystemRouteTable | Operation failed because You are not allowed to Delete System Transit Route Table. | 不允许删除系统路由表。 | 诊断 |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteEntry exists | 有TransitRouterRouteEntry时，无法删除TransitRouter。 | 诊断 |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable exists | 有自定义的TransitRouterRouteTable时，无法删除TransitRouter。 | 诊断 |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable or TransitRouterRouteEntry or BandwidthTransitRegion exists. | 存在自定义路由，或自定义路由表，或带宽复用配置，无法进行该操作，请删除相应配置后重试。 | 诊断 |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable or TransitRouterRouteEntry exists. | 存在自定义路由表或表项，无法进行该操作，请删除后重试。 | 诊断 |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable or TransitRouterRouteEntry or BandwidthTransitRegion exists. | 存在自定义路由，或自定义路由表，或带宽复用配置，无法进行该操作，请删除相应配置后重试。 | 诊断 |
| 400 | OperationFailed.DeleteTransitRouterRouteEntry | Operation failed because this route entry is created automatically. | 系统自动创建的路由不能删除。 | 诊断 |
| 400 | OperationFailed.FlowLogExist | Flow log configurations exist. Delete the flow log configurations and retry the operation. | 存在流日志配置，请删除流日志后重试操作。 | 诊断 |
| 400 | OperationFailed.FlowLogExistOrNisOpened | Operation failed because FlowLog exists or Nis opened. | 存在flowlog或者开通Nis服务，无法支持该操作。 | 诊断 |
| 400 | OperationFailed.GrantCrossAccountExist | Cross-account authorization already exists. | 跨账号授权已存在。 | 诊断 |
| 400 | OperationFailed.InsufficientAvailableQuota | Operation failed due to the account quota is insufficient. | 账户可用额度不足。 | 诊断 |
| 400 | OperationFailed.InsufficientBalance | Your account does not have enough balance. | 由于阿里云账号欠费，操作失败。 | 诊断 |
| 400 | OperationFailed.InterRegionCloudRouteEntryExist | Operation failed because inter region cloud route associated with specified attachment exist. | Attachment存在关联的跨地域云服务路由。 | 诊断 |
| 400 | OperationFailed.InvalidChildInstanceType | Operation failed. Child instance type is invalid for this operation. | 操作指定的子实例类型不合法。 | 诊断 |
| 400 | OperationFailed.InvalidChildInstanceType | Child instance type is invalid for this operation. | 此操作指定的子实例类型不合法。 | 诊断 |
| 400 | OperationFailed.InvalidLogInfo | The entered log service information is invalid. Check whether the ProjectName and LogStoreName are correct, and whether Log Service has been activated. | 输入的日志服务信息不合法。请确认ProjectName以及LogStoreName是否正确，并确认是否已开通日志服务。 | 诊断 |
| 400 | OperationFailed.InvalidOperation | The operation failed because it is not supported. | 该操作不支持导致操作失败. | 诊断 |
| 400 | OperationFailed.InvalidTransitRouter | Operation failed because the transit router is not supported. | 由于转发路由表不支持该操作，该操作失败. | 诊断 |
| 400 | OperationFailed.InvalidVpcStatus | The status of the specified VPC does not support this operation. | 当前VPC状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | OperationFailed.IpAddressExhausted | No IP addresses are available for allocation. | 可分配的IP地址已耗尽，无法操作。 | 诊断 |
| 400 | OperationFailed.MulticastDomainAssociationExist | The specified TransitRouterAttachment has configured MulticastDomainAssociation. Please remove the configuration first. | 当前TransitRouterAttachment绑定在组播域上，请解绑后重试。 | 诊断 |
| 400 | OperationFailed.MulticastDomainExist | Operation is invalid because multicast domain exists. | 组播域存在，请先删除组播域后再删除转发路由器。 | 诊断 |
| 400 | OperationFailed.MulticastGroupExist | Operation is invalid because multicast group exists. | 组播组存在，无法支持该操作。 | 诊断 |
| 400 | OperationFailed.MulticastGroupExist | Operation is failed because connect peer exists in multicast groups. | connect peer加载在组播组中，请解绑后重试。 | 诊断 |
| 400 | OperationFailed.MulticastGroupExist | Operation is failed because attachment exists in multicast groups. | attachment绑定在组播组中，无法操作，请解绑后重试。 | 诊断 |
| 400 | OperationFailed.NoAvailablePaymentMethod | No payment method is specified for your account. We recommend that you add a payment method. | 您的账户尚未指定付款方式，请先添加付款方式。 | 诊断 |
| 400 | OperationFailed.NoRealNameAuthentication | No real-name authentication was applied. | 没有进行实名认证。 | 诊断 |
| 400 | OperationFailed.NotSupportForceDelete | Not support force delete attachment. | 不支持强制删除功能。 | 诊断 |
| 400 | OperationFailed.NoVbrAttachedToCEN | Operation is invalid because no vbr attached to cen. | 该CEN上没有绑定vbr，无法支持该操作。 | 诊断 |
| 400 | OperationFailed.OperateShareResource | Operate share prefixlist failed. | 共享prefixlist失败。 | 诊断 |
| 400 | OperationFailed.OperationIsProcessing | The operation failed because another operation is being processed. | 由于并发操作，操作失败。 | 诊断 |
| 400 | OperationFailed.OrderIsProcessing | The operation failed because the order is being processed. | 由于订单正在处理，操作失败。 | 诊断 |
| 400 | OperationFailed.PostPay95BwpNotAllowEnterpriseTr | Cbn with post pay 95 bandwidth package does not allow enterprise tr. | 使用老95带宽包的云企业网不允许创建企业版转发路由器。 | 诊断 |
| 400 | OperationFailed.PrefixListAssociationExist | Operation is invalid because prefixList association exists. | TR存在关联的路由前缀，请删除后重试。 | 诊断 |
| 400 | OperationFailed.PrefixListExist | Operation failed because PrefixList exists. | prefixlist存在，操作失败。 | 诊断 |
| 400 | OperationFailed.PrefixListExist | Operation is invalid because prefix list exists. | prefix list存在，无法支持该操作，请删除prefix list后重试。 | 诊断 |
| 400 | OperationFailed.PurchaseQuantityLimit | You have exceeded the maximum quantity you can purchase. | 当前达到最大的购买上限，无法操作。 | 诊断 |
| 400 | OperationFailed.QuerryCommodityPrice | Failed to query the commodity price. | 查询商品价格失败。 | 诊断 |
| 400 | OperationFailed.QuotaNotEnough | The quota is not enough. | 限额已满，无法操作。 | 诊断 |
| 400 | OperationFailed.RIInstanceExist | Operation is failed because RI exists. | RI存在，无法操作。 | 诊断 |
| 400 | OperationFailed.Risk | The error message returned because a security risk with your payment method is detected. Click the URL in your email or internal message to verify your payment method and then place your order again. | 系统检测到您的支付方式存在风险，请通过邮件或站内信中的链接完成验证。验证完成后重新下单。 | 诊断 |
| 400 | OperationFailed.RouteConflict | Route conflict exists in routing table. | 路由表中存在路由冲突。 | 诊断 |
| 400 | OperationFailed.RouteEntryExist | Failed to delete the instance because a route table entry points to the instance. | 存在指向该实例的路由表项无法删除该实例，请删除路由表项后删除。 | 诊断 |
| 400 | OperationFailed.RouteTableAssociationExist | Operation failed because TransitRouterRouteTable exists | 由于存在关联的路由表，网络连接删除失败。 | 诊断 |
| 400 | OperationFailed.RouteTableAssociationExist | Operation failed because TransitRouterRouteTable exists. | TransitRouterRouteTable存在，无法支持当前操作。 | 诊断 |
| 400 | OperationFailed.RouteTableAssociationExist | Operation failed because there is associated routing table. | 由于存在关联的路由表，网络连接删除失败。 | 诊断 |
| 400 | OperationFailed.RouteTablePropagationExist | The specified TransitRouterAttachment has configured RouteTablePropagation. Please remove the configuration first. | 该网络连接配置了路由表学习，请先解除路由学习。 | 诊断 |
| 400 | OperationFailed.RouteTablePropagationExist | Operation failed because You are not allowed to delete TransitAttachment with TransitRouter RouteTable Associated. | TransitAttachment绑定在路由表上，请解绑后重试。 | 诊断 |
| 400 | OperationFailed.SetPostPay95BandwidthLimitError | Operation failed because set postpay 95 bandwidth limit error. | 设置95带宽失败。 | 诊断 |
| 400 | OperationFailed.SourceIpUnSupported | The specified source IP address is unsupported. | 不支持参数中指定的源IP地址，请修改后重试。 | 诊断 |
| 400 | OperationFailed.StatusNotSupport | The VBR or VPC instance to CBN attachment is not in a valid state for the operation. | 当前VBR或VPC的状态不支持该操作，请稍后重试。 | 诊断 |
| 400 | OperationFailed.TaskConflict | The operation is too frequent, please wait a moment and try again. | 操作频繁，请稍后重试。 | 诊断 |
| 400 | OperationFailed.TrafficMarkingPolicyExist | Operation is invalid because traffic marking policy exists. | 流量标记策略存在，请删除流量标记策略后再删除转发路由器。 | 诊断 |
| 400 | OperationFailed.TrafficMarkingPolicyExist | Operation is invalid because transit router traffic marking policy exists. | TR存在流量标记策略，请删除后重试。 | 诊断 |
| 400 | OperationFailed.TrafficQosExist | Operation failed because TrafficQos exists | TrafficQos存在，请删除后重试。 | 诊断 |
| 400 | OperationFailed.TrafficQosPolicyExist | Operation is invalid because traffic qos policy exists. | 存在流量调度策略，无法进行该操作，请删除后重试。 | 诊断 |
| 400 | OperationFailed.TransitRouterNotExist | Operation failed because transit router not exist. | 转发路由器不存在。 | 诊断 |
| 400 | OperationFailed.TransitRouterType | Operation failed because transit router type not support this operation. | 当前转发路由器类型不支持该操作。 | 诊断 |
| 400 | OperationFailed.TransitRouterType | The specified TransitRouterType does not support the operation. | 该类型的转发路由器不支持该操作。 | 诊断 |
| 400 | OperationFailed.TransitRouterType | Operation failed because The Basic TransitRouter does not support this action. | 基础版转发路由器不支持该操作。 | 诊断 |
| 400 | OperationFailed.UpDownRadeConfigNoChange | The operation failed because the config not change. | 配置未发生变化。 | 诊断 |
| 400 | OperationFailed.UseStoredCardFailed | Operation failed because use stored card failed. | 使用储值卡失败。 | 诊断 |
| 400 | OperationFailed.VbrAttachedVbrHa | The operation is failed for VBR HA is configured for specified VBR instance. | 指定的VBR配置了快速倒换组，请删除配置后重试。 | 诊断 |
| 400 | OperationFailed.VbrWithAllowPrefixes | Operation failed because allow prefixes referenced by vbr exists. | VBR上当前配置了允许的前缀路由从而导致操作失败 | 诊断 |
| 400 | OperationFailed.VpcNotAttachedToCen | Operation failed because vpc not attached to cen. | 指定VPC没有绑定到CEN。 | 诊断 |
| 400 | OperationFailed.VSwitchIpv6CidrNotAllocated | The specified vswitch does not have IPv6 address allocated. | 指定的VSwitch未开通Ipv6，请开通Ipv6后再进行该操作。 | 诊断 |
| 400 | OperationFailed.VSwitchNotFound | The specified vswitch not found. | 指定的VSwitchId不存在，请确认该VSwitch状态是否可用或指定其他可用的VSwitch。 | 诊断 |
| 400 | OperationInvalid.AttachmentReferencedIPv6RouteEntryExisted | Operation is failed because there is at least one route entry(IPv6) which next hop is the specified attachment. | 存在IPv6路由条目指向attachment，无法进行该操作。 | 诊断 |
| 400 | OperationInvalid.AttachmentReferencedVpcIPv6RouteEntryExisted | The specified attachment is referenced by vpc route entry(IPv6). | VPC中存在IPv6路由条目指向attachment，无法支持该操作。请先到VPC清除此路由条目，再执行该操作。 | 诊断 |
| 400 | OperationInvalid.EniReferencedIPv6RouteEntryExisted | Operation is failed because there is at least one route entry(IPv6) which next hop is network interface that the specified attachment referenced. | VPC中存在IPv6路由条目指向attachment相关的eni，无法支持该操作。请先清除此路由条目，再执行该操作。 | 诊断 |
| 400 | OperationInvalid.IdentityRegistrationStatusNotSupport | Real name registration of enterprises required. | 因您在“地域”或“对端地域”选择了“中国内地”的地域，您需要是企业用户且已完成企业实名登记，才能继续购买。关于如何做企业实名登记，请查看实名认证文档 | 诊断 |
| 400 | OperationInvalid.IncompatibleFlowlogExist | Operation is invalid because incompatible flowlog config exists. | 存在不兼容的Flowlog配置，请删除后重试。 | 诊断 |
| 400 | OperationInvalid.UserCanNotBuyCrossBorderBwp | According to the laws and regulations of the operator and mainland China, you are currently not eligible to purchase or renew a cross-border bandwidth package. Please contact online customer service or your business manager for consultation. | 根据运营商及中国大陆法律法规的要求，您当前暂不符合购买/续费跨境带宽包条件，请联系在线客服或您的商务经理咨询处理。 | 诊断 |
| 400 | OperationNotAllowed.DefaultLinkTypeOnlySupportGold | Operation is not allowed because this user can only set default link type to Gold. | 本用户只能设置默认链路类型为金。 | 诊断 |
| 400 | OperationNotAllowed.DefaultLinkTypeOnlySupportUnderlaySilver | This user can only set the default link type to UnderlaySilver. | 本用户只能设置默认链路类型为银（UnderlaySilver）。 | 诊断 |
| 400 | OperationNotSupport.VpcAutoRoutesPublish | Auto publish vpc routes is not supported in this region. | 当前地域暂不支持vpc路由自动发布。 | 诊断 |
| 400 | OperationUnsupported.action | This action is not supported. | 支持操作不支持 | 诊断 |
| 400 | OperationUnsupported.action | This action is not support. | 当前地域不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.AdvancedFeature | The specified VPC does not support this operation. | 指定的VPC不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.Associate | The specified attachment or routeTable is not supported by this operation. | 参数中指定的attachment或routeTable不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.Attachment | The cross region connection contains an existing bandwidth. The operation is not supported. | 跨地域连接存在带宽复用，不支持此操作。 | 诊断 |
| 400 | OperationUnsupported.Attachment | Transit region connection does not support the operation. | 跨地域连接不支持此操作 | 诊断 |
| 400 | OperationUnsupported.AutoPublishRouteEnabled | Connect attachment not support AutoPublishRouteEnabled. | Connect attachment不支持打开路由自动同步。 | 诊断 |
| 400 | OperationUnsupported.BandwidthType | The specified BandwidthType does not support the operation. | 当前BandwidthType不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.CenFullLevel | CEN full level does not support TransitRouter | Full类型CEN不支持创建企业版转发路由器。 | 诊断 |
| 400 | OperationUnsupported.CenFullLevel | CEN full level does not support vpn bgp. | Full模式的CEN不支持VPN Bpg。 | 诊断 |
| 400 | OperationUnsupported.CloudBoxVbrNotSupport | Cloud Box Vbr does not support. | 云盒实例不允许加载。 | 诊断 |
| 400 | OperationUnsupported.CloudBoxVpc | The specified CloudBoxVpc does not support the operation. | 云盒VPC不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.CloudBoxVswNotSupport | Cloud Box vsw does not support. | 云盒的vsw不允许加载。 | 诊断 |
| 400 | OperationUnsupported.CloudDataTransferService | CCN region not support cloud data transfer service. | CCN地域中不支持cloud data transfer服务。 | 诊断 |
| 400 | OperationUnsupported.ConnectAttachment | This region not support connect attachment. | 该地域暂不支持 connect attachment功能。 | 诊断 |
| 400 | OperationUnsupported.CrossRegionNotSupport | Operation Failed. Host region Id is not equal to access region Id, VPC or VBR not support cross region privatezone service. | 主机地域ID与接入地域ID不一致，VPC或VBR不支持跨地域PrivateZone服务。 | 诊断 |
| 400 | OperationUnsupported.CurrentCenNotSupportUpgradeToTr | Basic Edition TR with cross-region connections cannot be upgraded to Enterprise Edition TR for internal accounts. | 有跨地域连接的内部账号基础版TR不支持升级。 | 诊断 |
| 400 | OperationUnsupported.CurrentRegionOrAzNotSupportCenTr | Operation failed because current region or az not support transit router. | 当前地域或可用区不支持企业版转发路由器，无法升级。 | 诊断 |
| 400 | OperationUnsupported.DisablePropagation | The specified attachment or routeTable is not supported by this operation. | 参数中指定的attachment或routeTable不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.dissociateRouteTable | The specified attachment or routeTable is not supported by this operation. | 参数中指定的attachment或routeTable不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.DstPortRange | Current TR version does not support setting destination port range. | 当前TR版本流分类规则不支持设置目标端口范围 | 诊断 |
| 400 | OperationUnsupported.ECRAttachment | ECR Attachment is not supported. | 不支持ECR Attachment。 | 诊断 |
| 400 | OperationUnsupported.EnablePropagation | The specified attachment or routeTable is not supported by this operation. | 参数中指定的attachment或routeTable不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.ExistsIgmpv2MemberOnEni | An igmpv2 multicast source or multicast member already exists on the ENI. | 弹性网卡上已经存在 igmpv2 类型的组播源或组播成员了。 | 诊断 |
| 400 | OperationUnsupported.Igmpv2Support | The current UID does not allow the creation of a igmpv2 multicast domain. Please submit a ticket. | 当前UID不允许创建igmpv2类型的组播域，请提工单处理。 | 诊断 |
| 400 | OperationUnsupported.IPv6Cidr | The traffic marking policy for current TR type does not support IPv6 CIDR. | 基础版转发路由器的流量标记策略中流分类规则不支持IPv6网段。 | 诊断 |
| 400 | OperationUnsupported.ModifyTransitRouteTableAggregation | ModifyTransitRouteTableAggregation is unsupported. | 当前不支持编辑聚合路由功能。 | 诊断 |
| 400 | OperationUnsupported.NotAllowedDeleteIgmpv2Member | You cannot delete a multicast source or multicast member of the igmpv2 type. | 不允许删除igmpv2类型的组播源或组播成员。 | 诊断 |
| 400 | OperationUnsupported.NotAllowedDisableIgmpv2Support | The operation is not permitted because Igmpv2Support is not currently available to be disabled. | 当前不支持关闭igmpv2。 | 诊断 |
| 400 | OperationUnsupported.RegionId | The specified Region ID does not support the operation. | 此地域不支持该操作 | 诊断 |
| 400 | OperationUnsupported.RegionId | The specified region ID is not supported. | 操作不支持此地域 | 诊断 |
| 400 | OperationUnsupported.RegionId | The specified Region is not supported. | 当前地域不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.RegionId | The specified RegionId does not support the operation. | 当前地域不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.ResourceExistInEcrRegion | Upgrade Transit Router in current ECR instance region is unsupported. | ECR实例在当前地域存在子资源，不支持加入待升级的TR。 | 诊断 |
| 400 | OperationUnsupported.RouteTablePropagationEnabled | Connect attachment not support RouteTablePropagationEnabled. | Connect attachment不支持打开路由学习。 | 诊断 |
| 400 | OperationUnsupported.ServiceMode | The specified TransitRouter does not support the operation. | 当前转发路由器模式不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.ServiceMode | The operation is not supported because of the wrong transitRouter service mode. | 当前转发路由器模式不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.ServiceMode | The specified ServiceMode does not support the operation. | 当前转发路由器模式不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.SrcPortRange | Current TR version does not support setting source port range. | 当前TR版本不支持设置源端口范围 | 诊断 |
| 400 | OperationUnsupported.SupportMulticast | The multicast is not supported in the specified region. | 当前地域不支持组播。 | 诊断 |
| 400 | OperationUnsupported.Tag | The Tag is not supported in the specified region. | 该地域不支持转发路由器Tag功能。 | 诊断 |
| 400 | OperationUnsupported.TrafficQosPolicyExist | Operation unsupported because traffic qos policy exists. | qos策略存在，不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.TransitAttachment | The specified TransitAttachment does not support the operation. | 指定的TransitAttachment不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.TransitRegionMappings | The specified TransitRegionMappings does not support the operation. | 中转地域不支持此操作 | 诊断 |
| 400 | OperationUnsupported.TransitRegionMappings | When both OriginalRegionId are CCN regions, you must specify TransitRegionId. | 起始链路和对端链路都是云连接网时，必须提供双端的中转地域 | 诊断 |
| 400 | OperationUnsupported.TransitRouterAttachment | The specified TransitRouterAttachment has configured TransitRegion. Please remove the configuration first. | 存在带宽复用配置，请删除后重试。 | 诊断 |
| 400 | OperationUnsupported.TransitRouterCidr | Transit region does not support the operation. | 当前地域不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.TransitRouterCidrList | The TransitRouterCidrList is not support in the specified Region. | 当前地域不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.TransitRouterId | TransitRouterId is unsupported. | 转发路由器类型是基础版时不支持。 | 诊断 |
| 400 | OperationUnsupported.TransitRouterStatus | The specified TransitRouterStatus does not support the operation. | 指定的转发路由器状态没有处于稳态，无法操作，请稍后重试。 | 诊断 |
| 400 | OperationUnsupported.TransitRouterType | The specified TransitRouterType does not support the operation. | 当前TransitRouter类型不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.TransitRouterType | The operation is not supported because of the wrong transitRouter type. | 当前TransitRouter类型不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.VbrAttachment | This region not support vbr attachment. | 该地域不支持加载vbrAttachment。 | 诊断 |
| 400 | OperationUnsupported.VcoTunnelNotMatchZoneParam | The tunnel type of the entered Vco does not match the Zone parameter. | 输入的Vco的隧道类型和Zone参数不匹配。 | 诊断 |
| 400 | OperationUnsupported.VpcRegion | The specified Region is not support for this operation. | 当前地域不支持该操作。 | 诊断 |
| 400 | OperationUnsupported.VpcRoutePropagationSource | The operation on this VPC route propagation source is not supported. | 不支持对此VPC路由传播源的操作。 | 诊断 |
| 400 | OperationUnsupported.VpnAttachment | The specified region does not support the operation. | 当前地域不支持该操作。 | 诊断 |
| 400 | Order.AccountStatusIllegal | Illegal account status for postpay service not opened for this account. | 账号未开通后付费白名单，请开通后重试。 | 诊断 |
| 400 | Order.Opened | 您已开通本服务，请前往控制台使用。 | 您已开通本服务，请前往控制台使用。 | 诊断 |
| 400 | OverLappingExist.Cidr | The cidr overlapping exist. | cidr overlapping已存在。 | 诊断 |
| 400 | ParameterError | The parameter is error. | 参数错误。 | 诊断 |
| 400 | ParameterIllegal | The parameter is illegal. | 参数不合法。 | 诊断 |
| 400 | ParameterIllegal.AccessRegionId | Parameter Access RegionId illegal. | 参数中指定的AccessRegionId不合法。 | 诊断 |
| 400 | ParameterIllegal.AccessRegionIdNoCCN | Parameter Access RegionId illegal. | 参数中指定的AccessRegionId不合法。 | 诊断 |
| 400 | ParameterIllegal.AccessRegionIdNoCCN | Parameter Access RegionId is illegal. | 参数AccessRegionId非法。 | 诊断 |
| 400 | ParameterIllegal.BandwidthPackage | The parameter of bandwidth packaged is illegal. | 参数中指定的BandwidthPackage不合法。 | 诊断 |
| 400 | ParameterIllegal.BandwidthPackageDefaultLinkTypeOnlySupportGold | Cen bandwidthPackage only support Gold. | 带宽分配方式为带宽包时，默认链路类型仅支持金（Gold） | 诊断 |
| 400 | ParameterIllegal.BwpSpec | The parameter of bandwidth package specification is illegal. | 参数中指定的BandwidthPackage specification不合法。 | 诊断 |
| 400 | ParameterIllegal.CdtDefaultLinkTypeOnlySupportGold | CDT only support Gold when both transitrouters for cross regional connections are not all enterprise version. | 当跨地域连接的两端转发路由器不全是企业版且带宽分配方式为按流量计费时，默认链路类型仅支持金（Gold）。 | 诊断 |
| 400 | ParameterIllegal.CdtDefaultLinkTypeOnlySupportPlatinumOrGold | DataTransfer only support Platinum and Gold. | 带宽分配方式为按流量计费时，默认链路类型仅支持铂金（Platinum）和金（Gold）。 | 诊断 |
| 400 | ParameterIllegal.CdtDefaultLinkTypeOnlySupportUnderlaySilver | CDT only support UnderlaySilver when both transitrouters for cross regional connections are not all enterprise version. | 当跨地域连接的两端转发路由器不全是企业版且带宽分配方式为按流量计费时，默认链路类型仅支持银（UnderlaySilver）。 | 诊断 |
| 400 | ParameterIllegal.CloudRouteHost | Parameter Host is not valid. | 参数中指定的CloudRouteHost不合法。 | 诊断 |
| 400 | ParameterIllegal.ClouteRouteCidrNotAllow | Parameter Host not in 100.64.0.0/10 | 云服务路由网段不合法。 | 诊断 |
| 400 | ParameterIllegal.ClouteRouteNotSupportIpv6 | Parameter Host not support IPv6 | 云服务路由不支持ipv6。 | 诊断 |
| 400 | ParameterIllegal.DefaultLinkTypeOnlySupportUnderlaySilver | Cen bandwidthPackage only support UnderlaySilver. | 带宽分配方式为带宽包时，默认链路类型仅支持银（UnderlaySilver） | 诊断 |
| 400 | ParameterIllegal.Host | Parameter Host does not support domain. | 参数中指定的Host不合法。 | 诊断 |
| 400 | ParameterIllegal.Host | The Parameter Host does not support domain. | 参数Host不支持域。 | 诊断 |
| 400 | ParameterIllegal.Ipv6CloudRouteCidrNotAllow | Parameter Host not in valid ipv6 cidr. | 云服务路由不支持ipv6。 | 诊断 |
| 404 | ParameterRegion | The specified region does not exist. | 指定地域不存在。 | 诊断 |
| 400 | ParamExclusive.BandwidthTypeAndCenBandwidthPackageId | DataTransfer and CenBandwidthPackageId is mutually exclusive. | 带宽分配方式为CDT时，不支持设置CenBandwidthPackageId字段。 | 诊断 |
| 400 | ParamExclusive.BasicAndMultiPrimary | Basic and MultiPrimary is mutually exclusive. | 基础版转发路由器不支持设置模式为MultiPrimary。 | 诊断 |
| 400 | ParamExclusive.BasicAndPrimaryStandby | Basic and PrimaryStandby is mutually exclusive. | 基础版转发路由器不支持设置模式为PrimaryStandby。 | 诊断 |
| 400 | ParamExclusive.NextHopTypeBlackHoleAndNextHopId | TransitRouterRouteEntryNextHopType(BlackHole) and TransitRouterRouteEntryNextHopId is mutually exclusive. | 当路由条目中“是否为黑洞路由”勾选“是”时，请不要指定“下一跳连接”。 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId must be mutually exclusive with either TransitRouterRouteTableId or DestCidrBlock. | 转发路由器路由条目实例ID和路由表实例D以及目标网段互斥。 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId must be mutually exclusive with either RouteTableId or DestCidrBlock. | 路由条目ID和路由表ID，路由条目的目标网段是互斥。 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and TransitRouterRouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId， TransitRouterRouteTableId或DestCidrBlock参数互斥。 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdsAndStatus | TransitRouterRouteEntryIds and TransitRouterRouteEntryStatus are mutually exclusive. | 转发路由器路由条目ID和转发路由器路由条目状态互斥。 | 诊断 |
| 400 | ParamExclusive.RouteEntryIdsAndStatus | TransitRouterRouteEntryIds and TransitRouterRouteEntryStatus is mutually exclusive. | TransitRouterRouteEntryIds和TransitRouterRouteEntryStatus参数互斥。 | 诊断 |
| 400 | ParamExclusive.ServiceModeAndSupportMulticast | ServiceMode and SupportMulticast is mutually exclusive. | 该模式的转发路由器不支持开启组播功能。 | 诊断 |
| 400 | ParamExclusive.ServiceModeAndTransitRouterCidrList | ServiceMode and TransitRouterCidrList is mutually exclusive. | 该模式的转发路由器不支持开启cidr功能。 | 诊断 |
| 400 | ParamExclusive.TransitRouterRouteEntryTypeAndOtherParam | Other filter parameters cannot be specified when TransitRouterRouteEntryType is set to Static. | 当TransitRouterRouteEntryType是Static时，不允许指定其他过滤条件 | 诊断 |
| 400 | ParamExclusive.TransitRouterVPCAttachmentOptionsAndOptions | When creating or modifying a VPC attachment, the input parameter TransitRouterVPCAttachmentOptions and Options cannot be used at the same time. | 创建或修改专有网络连接时，不支持同时使用入参TransitRouterVPCAttachmentOptions和Options。 | 诊断 |
| 400 | PayFor.AccountMoneyValidateError | 账号可用金额不足. | 账号可用金额不足。 | 诊断 |
| 500 | PayFor.AccountMoneyValidateError | Your channel merchant quota is insufficient. Please contact the channel merchant. | 您的渠道商额度不足，请与渠道商联系 | 诊断 |
| 400 | PayFor.CreditPayInsufficientBalance | 额度不足,请联系您的渠道合作伙伴提升额度。 | 额度不足,请联系您的渠道合作伙伴提升额度。 | 诊断 |
| 400 | ProjectExist | Project already exist, please try a different project name. | 日志Project已存在，请尝试使用不同的Project名称。 | 诊断 |
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | 参数中指定的project或logstore不存在。 | 诊断 |
| 400 | QuotaExceeded | The quota of resource is full. | 资源数量已达到上限。 | 诊断 |
| 400 | QuotaExceeded.AggregationRoute | The aggregation route count is over limit. | 聚合路由数量已达到上限。 | 诊断 |
| 400 | QuotaExceeded.Bandwidth | Bandwidth quota exceeded. | 带宽值超出配额限制。 | 诊断 |
| 400 | QuotaExceeded.CenQuotaEcrAttachPerTransitRouter | The maximum number of ECR attachment per Transit Router is exceeded. | 转发路由器下的ECR连接数量超限。 | 诊断 |
| 400 | QuotaExceeded.CenQuotaVbrAttachPerTransitRouter | The maximum number of VBR attachment per Transit Router is exceeded. | 每个转发路由器支持连接的边界路由器VBR个数超限，可提交工单提升额度。 | 诊断 |
| 400 | QuotaExceeded.CenQuotaVpcAttachPerTransitRouter | The maximum number of VPC attachment per Transit Router is exceeded. | 每个转发路由器支持连接的专有网络VPC个数超限。 | 诊断 |
| 400 | QuotaExceeded.CenQuotaVpnAttachPerTransitRouter | The maximum number of VPN attachment per Transit Router is exceeded. | 每个转发路由器支持创建的VPN连接个数超限，可提交工单提升额度。 | 诊断 |
| 400 | QuotaExceeded.FlowlogCount | The maximum number of flow log instances is exceeded. | 该用户的flowlog数量已达上限 | 诊断 |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | flowlog数量已达到上限。 | 诊断 |
| 400 | QuotaExceeded.MulticastDomain | The MulticastDomain quota is exceeded. | 组播域的数量超过限制，无法再增加。 | 诊断 |
| 400 | QuotaExceeded.SourceAndMemberPerTransitRouter | The number of multicast group members and sources has exceed the maximum value that can be created. | 每个转发路由器下可以支持的组播源和组播成员数量超出限制。 | 诊断 |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | Tag数量已达到上限。 | 诊断 |
| 400 | QuotaExceeded.TrafficMatchRule | The maximum number of TrafficMatchRule per Transit Router is exceeded. | 每个转发路由器实例支持创建的流分类规则的个数超限，可提交工单提升额度。 | 诊断 |
| 400 | QuotaExceeded.TransitRouterConnectPeer | Transit Router connect peer quota exceeded. | 创建Connect Peer配额超限。 | 诊断 |
| 400 | QuotaExceeded.TransitRouterRoutEntry | The TransitRouterRoutEntry quota is exceeded. | 转发路由器路由条目配额超限。 | 诊断 |
| 400 | QuotaExceeded.TransitRouterRoutEntry | TransitRouterRoutEntry quota exceeded. | 路由数量已达到上限。 | 诊断 |
| 400 | QuotaExceeded.TransitRouterRoutTable | TransitRouterRoutTable quota exceeded. | 路由表数量已达到上限。 | 诊断 |
| 400 | QuotaExceeded.VpcAutoRoutesPublishPerTransitRouter | The number of VPCs that have route synchronization enabled has reached the upper limit. | 开启路由自动同步的VPC数量已达到上限。 | 诊断 |
| 400 | QuotaFull.ChildInstanceRelatedCen | The childinstance has exceed the quota of the times that a childinstance can be attached as an attachment. | 该实例绑定CEN数量已达到上限，无法加载。 | 诊断 |
| 400 | QuotaFull.MulticastDomainPerVpc | The number of multicast domain that vpc associated has exceed the maximum value that can be associated. | VPC可以关联的组播域数量已达到上限。 | 诊断 |
| 400 | QuotaFull.MulticastGroupPerDomain | The number of multicast group has exceed the maximum value that can be created. | 组播域中的组播组数量已达到上限。 | 诊断 |
| 400 | QuotaFull.MulticastMemberPerGroup | The number of multicast group member has exceed the maximum value that can be created. | 组播组中的组播成员数量已达到上限。 | 诊断 |
| 400 | QuotaFull.MulticastPeerMemberPerGroup | The number of multicast group member peer domain has exceed the maximum value that can be created. | 组播组中的跨地域成员数量已达到上限。 | 诊断 |
| 400 | QuotaFull.MulticastSourcePerGroup | The number of multicast group source has exceed the maximum value that can be created. | 组播组中的组播源数量已达到上限。 | 诊断 |
| 400 | QuotaFull.VswitchPerMulticastDomain | The number of vswitch associated with multicast domain has exceed the maximum value that can be created. | 组播域关联的vswitch数量已达到上限。 | 诊断 |
| 400 | QuotaReached.Route | The quota of the route table is not enough for the request prefix list. | 路由数量已达到上限。 | 诊断 |
| 404 | Region.NotFound | The region has not found | region不存在。 | 诊断 |
| 400 | RegionNotSupport.Prefixlist | Prefixlist association are not supported in this region. | 当前地域不支持该功能。 | 诊断 |
| 400 | ResourceConflict.Route | Some of the prefixes of the prefix list are conflicted with exsited routes. | prefix list与已有路由存在冲突。 | 诊断 |
| 400 | ResourceExisted.PrefixlistAssociation | The prefix list has been already associated with this route table. | prefix list已与路由表绑定。 | 诊断 |
| 400 | ResourceMismatch.Nexthop | The specified nexthop and nexthop type mismatched. | 参数中指定的nexthop或nexthopType有误。 | 诊断 |
| 400 | ResourceNotFound | The resource does not found. | 资源不存在。 | 诊断 |
| 400 | ResourceNotFound.Nexthop | The specified nexthop instance is not exsit. | 参数中指定的nexthop不存在。 | 诊断 |
| 400 | ResourceNotFound.PrefixList | The specified prefixlist does not found. | 参数中指定的prefixlist不存在。 | 诊断 |
| 400 | ResourceNotFound.PrefixlistAssociation | The prefix list is not associated with this route table. | prefix list未与路由表绑定。 | 诊断 |
| 400 | ResourceNotFound.PrefixlistCidrs | Can not find any cidr of specified prefix list. | prefix list不存在cidr。 | 诊断 |
| 400 | ResourceNotFound.TransitRouterAttachment | The specified TransitRouterAttachment does not found. | TransitRouterAttachment不存在。 | 诊断 |
| 400 | ResourceNotSupport.CCN | CCN not support prefix list. | CCN不支持prefix list。 | 诊断 |
| 400 | ResourceNotSupport.Nexthop | The specified nexthop instance type is not support for the operation. | 参数中指定的nexthop不支持该操作。 | 诊断 |
| 400 | Risk.RiskControlRejection | 为保护您的账户安全，下单被中止，详情请联系客服。 | 为保护您的账户安全，下单被中止，详情请联系客服。 | 诊断 |
| 400 | RouteConflict | The specified route already exists. | 输入的路由已存在。 | 诊断 |
| 400 | RouteConflict | The route has conflict with other route. | 路由冲突。 | 诊断 |
| 400 | RuleExist | The specified rule already exists. | 规则已存在 | 诊断 |
| 400 | RuleExist | The rule has already existed. | 该规则已存在。 | 诊断 |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | Tag数量超限。 | 诊断 |
| 400 | SourceProjectNotExist | The specified source project or Logstore does not exist. | 源project或者logstore不存在 | 诊断 |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | SourceProject或者logstore不存在。 | 诊断 |
| 400 | SystemBusy | The system is busy. Please try again later. | 当前系统繁忙，请稍后重试。 | 诊断 |
| 400 | Throttling | Request was denied due to request throttling. | 操作频繁，请稍后重试。 | 诊断 |
| 400 | Throttling.User | Request was denied due to user flow control. | 请求过快触发限流，请稍后访问。 | 诊断 |
| 400 | TransitRouterRouteEntryNextHopId.NotFound | TransitRouterRouteEntryNextHopId is not found. | 转发路由器路由条目下一跳实例ID不存在。 | 诊断 |
| 400 | Unauthorized | The AccessKeyId is unauthorized. | 账号无权限操作。 | 诊断 |
该文章对您有帮助吗？